All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/14] Xilinx axi ethernet patches
@ 2014-02-12 15:55 ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, devicetree, monstr, John Linn,
	Anirudha Sarangi, linux-kernel, Grant Likely, Rob Herring,
	linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 1244 bytes --]

Hi,

I have exctracted patches which I have in our
xilinx git tree which are missing in the mainline.

The first two patches fix compilation error and
warnings. Then 5 feature patches
and the rest is OF cleanup and with kernel-doc
and checkpatch problems.

Thanks,
Michal


Michal Simek (4):
  net: axienet: Fix compilation error
  net: axienet: Fix compilation warnings
  net: axienet: Fix comments blocks
  net: axienet: Fix kernel-doc warnings

Peter Crosthwaite (2):
  net: axienet: Handle 0 packet receive gracefully
  net: axienet: Service completion interrupts ASAP

Srikanth Thokala (8):
  net: axienet: Support for RGMII
  net: axienet: Handle jumbo frames for lesser frame sizes
  net: axienet: Support phy-less mode of operation
  net: axienet: Removed checkpatch errors/warnings
  net: axienet: Use pdev instead of op
  net: axienet: Use devm_* calls
  net: axienet: Use of_property_* calls
  net: axienet: Removed _of_ prefix in probe and remove functions

 drivers/net/ethernet/xilinx/xilinx_axienet.h      | 108 ++++----
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 307 ++++++++++++----------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  30 ++-
 3 files changed, 241 insertions(+), 204 deletions(-)

--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 0/14] Xilinx axi ethernet patches
@ 2014-02-12 15:55 ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

I have exctracted patches which I have in our
xilinx git tree which are missing in the mainline.

The first two patches fix compilation error and
warnings. Then 5 feature patches
and the rest is OF cleanup and with kernel-doc
and checkpatch problems.

Thanks,
Michal


Michal Simek (4):
  net: axienet: Fix compilation error
  net: axienet: Fix compilation warnings
  net: axienet: Fix comments blocks
  net: axienet: Fix kernel-doc warnings

Peter Crosthwaite (2):
  net: axienet: Handle 0 packet receive gracefully
  net: axienet: Service completion interrupts ASAP

Srikanth Thokala (8):
  net: axienet: Support for RGMII
  net: axienet: Handle jumbo frames for lesser frame sizes
  net: axienet: Support phy-less mode of operation
  net: axienet: Removed checkpatch errors/warnings
  net: axienet: Use pdev instead of op
  net: axienet: Use devm_* calls
  net: axienet: Use of_property_* calls
  net: axienet: Removed _of_ prefix in probe and remove functions

 drivers/net/ethernet/xilinx/xilinx_axienet.h      | 108 ++++----
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 307 ++++++++++++----------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  30 ++-
 3 files changed, 241 insertions(+), 204 deletions(-)

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/c0b11373/attachment.sig>

^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 01/14] net: axienet: Fix compilation error
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Michal Simek, Anirudha Sarangi, John Linn,
	linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 908 bytes --]

Add missing header to fix compilation error.
drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1575:22:
 error: undefined identifier 'irq_of_parse_and_map'
drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1576:22:
 error: undefined identifier 'irq_of_parse_and_map'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 1ec65fe..9fb8ab2 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
+#include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 01/14] net: axienet: Fix compilation error
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

Add missing header to fix compilation error.
drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1575:22:
 error: undefined identifier 'irq_of_parse_and_map'
drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1576:22:
 error: undefined identifier 'irq_of_parse_and_map'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 1ec65fe..9fb8ab2 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
+#include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/76d99215/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 02/14] net: axienet: Fix compilation warnings
  2014-02-12 15:55 ` Michal Simek
  (?)
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Michal Simek, Anirudha Sarangi, John Linn,
	linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2552 bytes --]

Warning log:
xilinx_axienet_main.c: In function 'axienet_start_xmit_done':
xilinx_axienet_main.c:617:16: warning: operation on 'lp->tx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_start_xmit':
xilinx_axienet_main.c:703:18: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c:719:17: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_recv':
xilinx_axienet_main.c:792:16: warning: operation on 'lp->rx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_of_probe':
xilinx_axienet_main.c:1501:21: warning: unused variable 'rc' [-Wunused-variable]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9fb8ab2..4bfdf8c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -601,7 +601,8 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 		size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
 		packets++;

-		lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM;
+		++lp->tx_bd_ci;
+		lp->tx_bd_ci %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
 		status = cur_p->status;
 	}
@@ -687,7 +688,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				     skb_headlen(skb), DMA_TO_DEVICE);

 	for (ii = 0; ii < num_frag; ii++) {
-		lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+		++lp->tx_bd_tail;
+		lp->tx_bd_tail %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 		frag = &skb_shinfo(skb)->frags[ii];
 		cur_p->phys = dma_map_single(ndev->dev.parent,
@@ -703,7 +705,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
 	/* Start the transfer */
 	axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
-	lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+	++lp->tx_bd_tail;
+	lp->tx_bd_tail %= TX_BD_NUM;

 	return NETDEV_TX_OK;
 }
@@ -775,7 +778,8 @@ static void axienet_recv(struct net_device *ndev)
 		cur_p->status = 0;
 		cur_p->sw_id_offset = (u32) new_skb;

-		lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM;
+		++lp->rx_bd_ci;
+		lp->rx_bd_ci %= RX_BD_NUM;
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
 	}

--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 02/14] net: axienet: Fix compilation warnings
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Michal Simek, linux-kernel, Srikanth Thokala, Anirudha Sarangi,
	John Linn, linux-arm-kernel


[-- Attachment #1.1: Type: text/plain, Size: 2552 bytes --]

Warning log:
xilinx_axienet_main.c: In function 'axienet_start_xmit_done':
xilinx_axienet_main.c:617:16: warning: operation on 'lp->tx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_start_xmit':
xilinx_axienet_main.c:703:18: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c:719:17: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_recv':
xilinx_axienet_main.c:792:16: warning: operation on 'lp->rx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_of_probe':
xilinx_axienet_main.c:1501:21: warning: unused variable 'rc' [-Wunused-variable]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9fb8ab2..4bfdf8c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -601,7 +601,8 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 		size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
 		packets++;

-		lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM;
+		++lp->tx_bd_ci;
+		lp->tx_bd_ci %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
 		status = cur_p->status;
 	}
@@ -687,7 +688,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				     skb_headlen(skb), DMA_TO_DEVICE);

 	for (ii = 0; ii < num_frag; ii++) {
-		lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+		++lp->tx_bd_tail;
+		lp->tx_bd_tail %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 		frag = &skb_shinfo(skb)->frags[ii];
 		cur_p->phys = dma_map_single(ndev->dev.parent,
@@ -703,7 +705,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
 	/* Start the transfer */
 	axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
-	lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+	++lp->tx_bd_tail;
+	lp->tx_bd_tail %= TX_BD_NUM;

 	return NETDEV_TX_OK;
 }
@@ -775,7 +778,8 @@ static void axienet_recv(struct net_device *ndev)
 		cur_p->status = 0;
 		cur_p->sw_id_offset = (u32) new_skb;

-		lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM;
+		++lp->rx_bd_ci;
+		lp->rx_bd_ci %= RX_BD_NUM;
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
 	}

--
1.8.2.3


[-- Attachment #1.2: Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 02/14] net: axienet: Fix compilation warnings
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

Warning log:
xilinx_axienet_main.c: In function 'axienet_start_xmit_done':
xilinx_axienet_main.c:617:16: warning: operation on 'lp->tx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_start_xmit':
xilinx_axienet_main.c:703:18: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c:719:17: warning: operation on 'lp->tx_bd_tail' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_recv':
xilinx_axienet_main.c:792:16: warning: operation on 'lp->rx_bd_ci' may be undefined [-Wsequence-point]
xilinx_axienet_main.c: In function 'axienet_of_probe':
xilinx_axienet_main.c:1501:21: warning: unused variable 'rc' [-Wunused-variable]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9fb8ab2..4bfdf8c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -601,7 +601,8 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 		size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
 		packets++;

-		lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM;
+		++lp->tx_bd_ci;
+		lp->tx_bd_ci %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
 		status = cur_p->status;
 	}
@@ -687,7 +688,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				     skb_headlen(skb), DMA_TO_DEVICE);

 	for (ii = 0; ii < num_frag; ii++) {
-		lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+		++lp->tx_bd_tail;
+		lp->tx_bd_tail %= TX_BD_NUM;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 		frag = &skb_shinfo(skb)->frags[ii];
 		cur_p->phys = dma_map_single(ndev->dev.parent,
@@ -703,7 +705,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
 	/* Start the transfer */
 	axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
-	lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+	++lp->tx_bd_tail;
+	lp->tx_bd_tail %= TX_BD_NUM;

 	return NETDEV_TX_OK;
 }
@@ -775,7 +778,8 @@ static void axienet_recv(struct net_device *ndev)
 		cur_p->status = 0;
 		cur_p->sw_id_offset = (u32) new_skb;

-		lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM;
+		++lp->rx_bd_ci;
+		lp->rx_bd_ci %= RX_BD_NUM;
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
 	}

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/89c22860/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 03/14] net: axienet: Support for RGMII
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1388 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

This patch adds support for the RGMII. The h/w configuration
parameter C_PHY_TYPE, which represents the interface configured in
the design, is used to differentiate various interfaces supported
by AXI Ethernet.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4bfdf8c..3966d83 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -925,9 +925,16 @@ static int axienet_open(struct net_device *ndev)
 		return ret;

 	if (lp->phy_node) {
-		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+		if (lp->phy_type == XAE_PHY_TYPE_GMII) {
+			lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
 					     axienet_adjust_link, 0,
 					     PHY_INTERFACE_MODE_GMII);
+		} else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) {
+			lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     axienet_adjust_link, 0,
+					     PHY_INTERFACE_MODE_RGMII_ID);
+		}
+
 		if (!lp->phy_dev) {
 			dev_err(lp->dev, "of_phy_connect() failed\n");
 			return -ENODEV;
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 03/14] net: axienet: Support for RGMII
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

This patch adds support for the RGMII. The h/w configuration
parameter C_PHY_TYPE, which represents the interface configured in
the design, is used to differentiate various interfaces supported
by AXI Ethernet.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4bfdf8c..3966d83 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -925,9 +925,16 @@ static int axienet_open(struct net_device *ndev)
 		return ret;

 	if (lp->phy_node) {
-		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+		if (lp->phy_type == XAE_PHY_TYPE_GMII) {
+			lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
 					     axienet_adjust_link, 0,
 					     PHY_INTERFACE_MODE_GMII);
+		} else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) {
+			lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     axienet_adjust_link, 0,
+					     PHY_INTERFACE_MODE_RGMII_ID);
+		}
+
 		if (!lp->phy_dev) {
 			dev_err(lp->dev, "of_phy_connect() failed\n");
 			return -ENODEV;
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/418e2e80/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 04/14] net: axienet: Handle 0 packet receive gracefully
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Peter Crosthwaite, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2575 bytes --]

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

The AXI-DMA rx-delay interrupt can sometimes be triggered when there are 0
outstanding packets received. This is due to the fact that the receive function
will greedily consume as many packets as possible on interrupt. So if two
packets (with a very particular timing) arrive in succession they will each
cause the rx-delay interrupt, but the first interrupt will consume both packets.
This means the second interrupt is a 0 packet receive.

This is mostly OK, except that the tail pointer register is updated
unconditionally on receive. Currently the tail pointer is always set to the
current bd-ring descriptor under the assumption that the hardware has moved onto
the next descriptor. What this means for length 0 recv is the current descriptor
that the hardware is potentially yet to use will be marked as the tail. This
causes the hardware to think its run out of descriptors deadlocking the whole rx
path.

Fixed by updating the tail pointer to the most recent successfully consumed
descriptor.

Reported-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Jason Wu <huanyu@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3966d83..2e21ab2 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -726,15 +726,15 @@ static void axienet_recv(struct net_device *ndev)
 	u32 csumstatus;
 	u32 size = 0;
 	u32 packets = 0;
-	dma_addr_t tail_p;
+	dma_addr_t tail_p = 0;
 	struct axienet_local *lp = netdev_priv(ndev);
 	struct sk_buff *skb, *new_skb;
 	struct axidma_bd *cur_p;

-	tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
 	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];

 	while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
 		skb = (struct sk_buff *) (cur_p->sw_id_offset);
 		length = cur_p->app4 & 0x0000FFFF;

@@ -786,7 +786,8 @@ static void axienet_recv(struct net_device *ndev)
 	ndev->stats.rx_packets += packets;
 	ndev->stats.rx_bytes += size;

-	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+	if (tail_p)
+		axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
 }

 /**
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 04/14] net: axienet: Handle 0 packet receive gracefully
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

The AXI-DMA rx-delay interrupt can sometimes be triggered when there are 0
outstanding packets received. This is due to the fact that the receive function
will greedily consume as many packets as possible on interrupt. So if two
packets (with a very particular timing) arrive in succession they will each
cause the rx-delay interrupt, but the first interrupt will consume both packets.
This means the second interrupt is a 0 packet receive.

This is mostly OK, except that the tail pointer register is updated
unconditionally on receive. Currently the tail pointer is always set to the
current bd-ring descriptor under the assumption that the hardware has moved onto
the next descriptor. What this means for length 0 recv is the current descriptor
that the hardware is potentially yet to use will be marked as the tail. This
causes the hardware to think its run out of descriptors deadlocking the whole rx
path.

Fixed by updating the tail pointer to the most recent successfully consumed
descriptor.

Reported-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Jason Wu <huanyu@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3966d83..2e21ab2 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -726,15 +726,15 @@ static void axienet_recv(struct net_device *ndev)
 	u32 csumstatus;
 	u32 size = 0;
 	u32 packets = 0;
-	dma_addr_t tail_p;
+	dma_addr_t tail_p = 0;
 	struct axienet_local *lp = netdev_priv(ndev);
 	struct sk_buff *skb, *new_skb;
 	struct axidma_bd *cur_p;

-	tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
 	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];

 	while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
 		skb = (struct sk_buff *) (cur_p->sw_id_offset);
 		length = cur_p->app4 & 0x0000FFFF;

@@ -786,7 +786,8 @@ static void axienet_recv(struct net_device *ndev)
 	ndev->stats.rx_packets += packets;
 	ndev->stats.rx_bytes += size;

-	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+	if (tail_p)
+		axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
 }

 /**
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/e6875092/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 05/14] net: axienet: Service completion interrupts ASAP
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Peter Crosthwaite, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2248 bytes --]

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

The packet completion interrupts for TX and RX should be serviced before
the packets are consumed. This ensures against the degenerate case when a
new completion interrupt is raised after the handler has exited but before
the interrupts are cleared. In this case its possible for the ISR to clear
an unhandled interrupt (leading to potential deadlock).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Jason Wu <huanyu@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 2e21ab2..3c24f97 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -809,6 +809,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)

 	status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
 	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 		axienet_start_xmit_done(lp->ndev);
 		goto out;
 	}
@@ -832,9 +833,9 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);

 		tasklet_schedule(&lp->dma_err_tasklet);
+		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	}
 out:
-	axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	return IRQ_HANDLED;
 }

@@ -857,6 +858,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)

 	status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
 	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 		axienet_recv(lp->ndev);
 		goto out;
 	}
@@ -880,9 +882,9 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);

 		tasklet_schedule(&lp->dma_err_tasklet);
+		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	}
 out:
-	axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	return IRQ_HANDLED;
 }

--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 05/14] net: axienet: Service completion interrupts ASAP
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

The packet completion interrupts for TX and RX should be serviced before
the packets are consumed. This ensures against the degenerate case when a
new completion interrupt is raised after the handler has exited but before
the interrupts are cleared. In this case its possible for the ISR to clear
an unhandled interrupt (leading to potential deadlock).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Jason Wu <huanyu@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 2e21ab2..3c24f97 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -809,6 +809,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)

 	status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
 	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 		axienet_start_xmit_done(lp->ndev);
 		goto out;
 	}
@@ -832,9 +833,9 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);

 		tasklet_schedule(&lp->dma_err_tasklet);
+		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	}
 out:
-	axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	return IRQ_HANDLED;
 }

@@ -857,6 +858,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)

 	status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
 	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 		axienet_recv(lp->ndev);
 		goto out;
 	}
@@ -880,9 +882,9 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);

 		tasklet_schedule(&lp->dma_err_tasklet);
+		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	}
 out:
-	axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	return IRQ_HANDLED;
 }

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/e7924246/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 06/14] net: axienet: Handle jumbo frames for lesser frame sizes
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4873 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

In the current implementation, jumbo frames are supported only
for the frame sizes > 16K. This patch corrects this logic to
handle jumbo frames for lesser frame sizes (< 16K) ensuring jumbo frame
MTU is within the limit of max frame size configured in the h/w
design.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      |  9 ++---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 46 +++++++++++------------
 2 files changed, 27 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 44b8d2b..b3c50bd 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -11,16 +11,16 @@
 #include <linux/netdevice.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/if_vlan.h>

 /* Packet size info */
 #define XAE_HDR_SIZE			14 /* Size of Ethernet header */
-#define XAE_HDR_VLAN_SIZE		18 /* Size of an Ethernet hdr + VLAN */
 #define XAE_TRL_SIZE			 4 /* Size of Ethernet trailer (FCS) */
 #define XAE_MTU			      1500 /* Max MTU of an Ethernet frame */
 #define XAE_JUMBO_MTU		      9000 /* Max MTU of a jumbo Eth. frame */

 #define XAE_MAX_FRAME_SIZE	 (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
-#define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE)
+#define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE)
 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)

 /* Configuration options */
@@ -408,8 +408,7 @@ struct axidma_bd {
  *		  Txed/Rxed in the existing hardware. If jumbo option is
  *		  supported, the maximum frame size would be 9k. Else it is
  *		  1522 bytes (assuming support for basic VLAN)
- * @jumbo_support: Stores hardware configuration for jumbo support. If hardware
- *		   can handle jumbo packets, this entry will be 1, else 0.
+ * @rxmem:	Stores rx memory size for jumbo frame handling.
  */
 struct axienet_local {
 	struct net_device *ndev;
@@ -448,7 +447,7 @@ struct axienet_local {
 	u32 rx_bd_ci;

 	u32 max_frm_size;
-	u32 jumbo_support;
+	u32 rxmem;

 	int csum_offload_on_tx_path;
 	int csum_offload_on_rx_path;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3c24f97..9595403 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -471,14 +471,16 @@ static void axienet_device_reset(struct net_device *ndev)
 	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET);

 	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
+	lp->options |= XAE_OPTION_VLAN;
 	lp->options &= (~XAE_OPTION_JUMBO);

 	if ((ndev->mtu > XAE_MTU) &&
-	    (ndev->mtu <= XAE_JUMBO_MTU) &&
-	    (lp->jumbo_support)) {
-		lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE +
-				   XAE_TRL_SIZE;
-		lp->options |= XAE_OPTION_JUMBO;
+		(ndev->mtu <= XAE_JUMBO_MTU)) {
+		lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN +
+					XAE_TRL_SIZE;
+
+		if (lp->max_frm_size <= lp->rxmem)
+			lp->options |= XAE_OPTION_JUMBO;
 	}

 	if (axienet_dma_bd_init(ndev)) {
@@ -1027,15 +1029,15 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu)

 	if (netif_running(ndev))
 		return -EBUSY;
-	if (lp->jumbo_support) {
-		if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64))
-			return -EINVAL;
-		ndev->mtu = new_mtu;
-	} else {
-		if ((new_mtu > XAE_MTU) || (new_mtu < 64))
-			return -EINVAL;
-		ndev->mtu = new_mtu;
-	}
+
+	if ((new_mtu + VLAN_ETH_HLEN +
+		XAE_TRL_SIZE) > lp->rxmem)
+		return -EINVAL;
+
+	if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64))
+		return -EINVAL;
+
+	ndev->mtu = new_mtu;

 	return 0;
 }
@@ -1556,16 +1558,14 @@ static int axienet_of_probe(struct platform_device *op)
 		}
 	}
 	/* For supporting jumbo frames, the Axi Ethernet hardware must have
-	 * a larger Rx/Tx Memory. Typically, the size must be more than or
-	 * equal to 16384 bytes, so that we can enable jumbo option and start
-	 * supporting jumbo frames. Here we check for memory allocated for
-	 * Rx/Tx in the hardware from the device-tree and accordingly set
-	 * flags. */
+	 * a larger Rx/Tx Memory. Typically, the size must be large so that
+	 * we can enable jumbo option and start supporting jumbo frames.
+	 * Here we check for memory allocated for Rx/Tx in the hardware from
+	 * the device-tree and accordingly set flags.
+	 */
 	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL);
-	if (p) {
-		if ((be32_to_cpup(p)) >= 0x4000)
-			lp->jumbo_support = 1;
-	}
+	if (p)
+		lp->rxmem = be32_to_cpup(p);
 	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
 				       NULL);
 	if (p)
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 06/14] net: axienet: Handle jumbo frames for lesser frame sizes
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

In the current implementation, jumbo frames are supported only
for the frame sizes > 16K. This patch corrects this logic to
handle jumbo frames for lesser frame sizes (< 16K) ensuring jumbo frame
MTU is within the limit of max frame size configured in the h/w
design.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      |  9 ++---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 46 +++++++++++------------
 2 files changed, 27 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 44b8d2b..b3c50bd 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -11,16 +11,16 @@
 #include <linux/netdevice.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/if_vlan.h>

 /* Packet size info */
 #define XAE_HDR_SIZE			14 /* Size of Ethernet header */
-#define XAE_HDR_VLAN_SIZE		18 /* Size of an Ethernet hdr + VLAN */
 #define XAE_TRL_SIZE			 4 /* Size of Ethernet trailer (FCS) */
 #define XAE_MTU			      1500 /* Max MTU of an Ethernet frame */
 #define XAE_JUMBO_MTU		      9000 /* Max MTU of a jumbo Eth. frame */

 #define XAE_MAX_FRAME_SIZE	 (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
-#define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE)
+#define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE)
 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)

 /* Configuration options */
@@ -408,8 +408,7 @@ struct axidma_bd {
  *		  Txed/Rxed in the existing hardware. If jumbo option is
  *		  supported, the maximum frame size would be 9k. Else it is
  *		  1522 bytes (assuming support for basic VLAN)
- * @jumbo_support: Stores hardware configuration for jumbo support. If hardware
- *		   can handle jumbo packets, this entry will be 1, else 0.
+ * @rxmem:	Stores rx memory size for jumbo frame handling.
  */
 struct axienet_local {
 	struct net_device *ndev;
@@ -448,7 +447,7 @@ struct axienet_local {
 	u32 rx_bd_ci;

 	u32 max_frm_size;
-	u32 jumbo_support;
+	u32 rxmem;

 	int csum_offload_on_tx_path;
 	int csum_offload_on_rx_path;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3c24f97..9595403 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -471,14 +471,16 @@ static void axienet_device_reset(struct net_device *ndev)
 	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET);

 	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
+	lp->options |= XAE_OPTION_VLAN;
 	lp->options &= (~XAE_OPTION_JUMBO);

 	if ((ndev->mtu > XAE_MTU) &&
-	    (ndev->mtu <= XAE_JUMBO_MTU) &&
-	    (lp->jumbo_support)) {
-		lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE +
-				   XAE_TRL_SIZE;
-		lp->options |= XAE_OPTION_JUMBO;
+		(ndev->mtu <= XAE_JUMBO_MTU)) {
+		lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN +
+					XAE_TRL_SIZE;
+
+		if (lp->max_frm_size <= lp->rxmem)
+			lp->options |= XAE_OPTION_JUMBO;
 	}

 	if (axienet_dma_bd_init(ndev)) {
@@ -1027,15 +1029,15 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu)

 	if (netif_running(ndev))
 		return -EBUSY;
-	if (lp->jumbo_support) {
-		if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64))
-			return -EINVAL;
-		ndev->mtu = new_mtu;
-	} else {
-		if ((new_mtu > XAE_MTU) || (new_mtu < 64))
-			return -EINVAL;
-		ndev->mtu = new_mtu;
-	}
+
+	if ((new_mtu + VLAN_ETH_HLEN +
+		XAE_TRL_SIZE) > lp->rxmem)
+		return -EINVAL;
+
+	if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64))
+		return -EINVAL;
+
+	ndev->mtu = new_mtu;

 	return 0;
 }
@@ -1556,16 +1558,14 @@ static int axienet_of_probe(struct platform_device *op)
 		}
 	}
 	/* For supporting jumbo frames, the Axi Ethernet hardware must have
-	 * a larger Rx/Tx Memory. Typically, the size must be more than or
-	 * equal to 16384 bytes, so that we can enable jumbo option and start
-	 * supporting jumbo frames. Here we check for memory allocated for
-	 * Rx/Tx in the hardware from the device-tree and accordingly set
-	 * flags. */
+	 * a larger Rx/Tx Memory. Typically, the size must be large so that
+	 * we can enable jumbo option and start supporting jumbo frames.
+	 * Here we check for memory allocated for Rx/Tx in the hardware from
+	 * the device-tree and accordingly set flags.
+	 */
 	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL);
-	if (p) {
-		if ((be32_to_cpup(p)) >= 0x4000)
-			lp->jumbo_support = 1;
-	}
+	if (p)
+		lp->rxmem = be32_to_cpup(p);
 	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
 				       NULL);
 	if (p)
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/e1f05c2f/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 07/14] net: axienet: Support phy-less mode of operation
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

This patch adds proper checks to handle the PHY-less case.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9595403..9cc9e59 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -940,11 +940,10 @@ static int axienet_open(struct net_device *ndev)
 					     PHY_INTERFACE_MODE_RGMII_ID);
 		}

-		if (!lp->phy_dev) {
+		if (!lp->phy_dev)
 			dev_err(lp->dev, "of_phy_connect() failed\n");
-			return -ENODEV;
-		}
-		phy_start(lp->phy_dev);
+		else
+			phy_start(lp->phy_dev);
 	}

 	/* Enable tasklets for Axi DMA error handling */
@@ -1609,7 +1608,8 @@ static int axienet_of_probe(struct platform_device *op)
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

 	lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
-	ret = axienet_mdio_setup(lp, op->dev.of_node);
+	if (lp->phy_node)
+		ret = axienet_mdio_setup(lp, op->dev.of_node);
 	if (ret)
 		dev_warn(&op->dev, "error registering MDIO bus\n");

--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 07/14] net: axienet: Support phy-less mode of operation
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

This patch adds proper checks to handle the PHY-less case.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9595403..9cc9e59 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -940,11 +940,10 @@ static int axienet_open(struct net_device *ndev)
 					     PHY_INTERFACE_MODE_RGMII_ID);
 		}

-		if (!lp->phy_dev) {
+		if (!lp->phy_dev)
 			dev_err(lp->dev, "of_phy_connect() failed\n");
-			return -ENODEV;
-		}
-		phy_start(lp->phy_dev);
+		else
+			phy_start(lp->phy_dev);
 	}

 	/* Enable tasklets for Axi DMA error handling */
@@ -1609,7 +1608,8 @@ static int axienet_of_probe(struct platform_device *op)
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

 	lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
-	ret = axienet_mdio_setup(lp, op->dev.of_node);
+	if (lp->phy_node)
+		ret = axienet_mdio_setup(lp, op->dev.of_node);
 	if (ret)
 		dev_warn(&op->dev, "error registering MDIO bus\n");

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/74f29ff1/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4237 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Removed checkpatch.pl errors and warnings.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++----------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 21 +++++++++++----------
 2 files changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9cc9e59..6059a0f 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -444,8 +444,8 @@ static void __axienet_device_reset(struct axienet_local *lp,
 	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
 		udelay(1);
 		if (--timeout == 0) {
-			dev_err(dev, "axienet_device_reset DMA "
-				"reset timeout!\n");
+			netdev_err(lp->ndev,
+				"axienet_device_reset DMA reset timeout!\n");
 			break;
 		}
 	}
@@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	}

 	if (axienet_dma_bd_init(ndev)) {
-		dev_err(&ndev->dev, "axienet_device_reset descriptor "
-			"allocation failed\n");
+		netdev_err(ndev,
+			"axienet_device_reset descriptor allocation failed\n");
 	}

 	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
@@ -560,8 +560,8 @@ static void axienet_adjust_link(struct net_device *ndev)
 			lp->last_link = link_state;
 			phy_print_status(phy);
 		} else {
-			dev_err(&ndev->dev, "Error setting Axi Ethernet "
-				"mac speed\n");
+			netdev_err(ndev,
+				   "Error setting Axi Ethernet mac speed\n");
 		}
 	}
 }
@@ -1238,8 +1238,8 @@ axienet_ethtools_set_pauseparam(struct net_device *ndev,
 	struct axienet_local *lp = netdev_priv(ndev);

 	if (netif_running(ndev)) {
-		printk(KERN_ERR	"%s: Please stop netif before applying "
-		       "configruation\n", ndev->name);
+		netdev_err(ndev,
+			   "Please stop netif before applying configuration\n");
 		return -EFAULT;
 	}

@@ -1295,8 +1295,8 @@ static int axienet_ethtools_set_coalesce(struct net_device *ndev,
 	struct axienet_local *lp = netdev_priv(ndev);

 	if (netif_running(ndev)) {
-		printk(KERN_ERR	"%s: Please stop netif before applying "
-		       "configruation\n", ndev->name);
+		netdev_err(ndev,
+			"Please stop netif before applying configuration\n");
 		return -EFAULT;
 	}

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 64b4639..ef0a20c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)

 	np1 = of_find_node_by_name(NULL, "cpu");
 	if (!np1) {
-		printk(KERN_WARNING "%s(): Could not find CPU device node.",
-		       __func__);
-		printk(KERN_WARNING "Setting MDIO clock divisor to "
-		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		netdev_warn(lp->ndev, "Could not find CPU device node.");
+		netdev_warn(lp->ndev,
+			    "Setting MDIO clock divisor to default %d\n",
+			    DEFAULT_CLOCK_DIVISOR);
 		clk_div = DEFAULT_CLOCK_DIVISOR;
 		goto issue;
 	}
 	property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL);
 	if (!property_p) {
-		printk(KERN_WARNING "%s(): Could not find CPU property: "
-		       "clock-frequency.", __func__);
-		printk(KERN_WARNING "Setting MDIO clock divisor to "
-		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		netdev_warn(lp->ndev,
+			 "Could not find clock ethernet controller property.");
+		netdev_warn(lp->ndev, "Setting MDIO clock divisor to default %d\n",
+							DEFAULT_CLOCK_DIVISOR);
 		clk_div = DEFAULT_CLOCK_DIVISOR;
 		of_node_put(np1);
 		goto issue;
@@ -187,8 +187,9 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 	if (host_clock % (MAX_MDIO_FREQ * 2))
 		clk_div++;

-	printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based "
-	       "on %u Hz host clock.\n", __func__, clk_div, host_clock);
+	netdev_dbg(lp->ndev,
+		"Setting MDIO clock divisor to %u based on %u Hz host clock.\n",
+		clk_div, host_clock);

 	of_node_put(np1);
 issue:
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Removed checkpatch.pl errors and warnings.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++----------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 21 +++++++++++----------
 2 files changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9cc9e59..6059a0f 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -444,8 +444,8 @@ static void __axienet_device_reset(struct axienet_local *lp,
 	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
 		udelay(1);
 		if (--timeout == 0) {
-			dev_err(dev, "axienet_device_reset DMA "
-				"reset timeout!\n");
+			netdev_err(lp->ndev,
+				"axienet_device_reset DMA reset timeout!\n");
 			break;
 		}
 	}
@@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	}

 	if (axienet_dma_bd_init(ndev)) {
-		dev_err(&ndev->dev, "axienet_device_reset descriptor "
-			"allocation failed\n");
+		netdev_err(ndev,
+			"axienet_device_reset descriptor allocation failed\n");
 	}

 	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
@@ -560,8 +560,8 @@ static void axienet_adjust_link(struct net_device *ndev)
 			lp->last_link = link_state;
 			phy_print_status(phy);
 		} else {
-			dev_err(&ndev->dev, "Error setting Axi Ethernet "
-				"mac speed\n");
+			netdev_err(ndev,
+				   "Error setting Axi Ethernet mac speed\n");
 		}
 	}
 }
@@ -1238,8 +1238,8 @@ axienet_ethtools_set_pauseparam(struct net_device *ndev,
 	struct axienet_local *lp = netdev_priv(ndev);

 	if (netif_running(ndev)) {
-		printk(KERN_ERR	"%s: Please stop netif before applying "
-		       "configruation\n", ndev->name);
+		netdev_err(ndev,
+			   "Please stop netif before applying configuration\n");
 		return -EFAULT;
 	}

@@ -1295,8 +1295,8 @@ static int axienet_ethtools_set_coalesce(struct net_device *ndev,
 	struct axienet_local *lp = netdev_priv(ndev);

 	if (netif_running(ndev)) {
-		printk(KERN_ERR	"%s: Please stop netif before applying "
-		       "configruation\n", ndev->name);
+		netdev_err(ndev,
+			"Please stop netif before applying configuration\n");
 		return -EFAULT;
 	}

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 64b4639..ef0a20c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)

 	np1 = of_find_node_by_name(NULL, "cpu");
 	if (!np1) {
-		printk(KERN_WARNING "%s(): Could not find CPU device node.",
-		       __func__);
-		printk(KERN_WARNING "Setting MDIO clock divisor to "
-		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		netdev_warn(lp->ndev, "Could not find CPU device node.");
+		netdev_warn(lp->ndev,
+			    "Setting MDIO clock divisor to default %d\n",
+			    DEFAULT_CLOCK_DIVISOR);
 		clk_div = DEFAULT_CLOCK_DIVISOR;
 		goto issue;
 	}
 	property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL);
 	if (!property_p) {
-		printk(KERN_WARNING "%s(): Could not find CPU property: "
-		       "clock-frequency.", __func__);
-		printk(KERN_WARNING "Setting MDIO clock divisor to "
-		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		netdev_warn(lp->ndev,
+			 "Could not find clock ethernet controller property.");
+		netdev_warn(lp->ndev, "Setting MDIO clock divisor to default %d\n",
+							DEFAULT_CLOCK_DIVISOR);
 		clk_div = DEFAULT_CLOCK_DIVISOR;
 		of_node_put(np1);
 		goto issue;
@@ -187,8 +187,9 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 	if (host_clock % (MAX_MDIO_FREQ * 2))
 		clk_div++;

-	printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based "
-	       "on %u Hz host clock.\n", __func__, clk_div, host_clock);
+	netdev_dbg(lp->ndev,
+		"Setting MDIO clock divisor to %u based on %u Hz host clock.\n",
+		clk_div, host_clock);

 	of_node_put(np1);
 issue:
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/fda4af2a/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 09/14] net: axienet: Fix comments blocks
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Michal Simek, Anirudha Sarangi, John Linn,
	linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 14461 bytes --]

There is rule for network drivers with comments blocks
which is newly checked by checkpatch.pl script.
Let's fix it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      | 93 ++++++++++++-----------
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++----
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  3 +-
 3 files changed, 71 insertions(+), 59 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index b3c50bd..995a6e7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -38,18 +38,21 @@
 #define XAE_OPTION_FLOW_CONTROL			(1 << 4)

 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
- * stripped. Default: disabled (set) */
+ * stripped. Default: disabled (set)
+ */
 #define XAE_OPTION_FCS_STRIP			(1 << 5)

 /* Generate FCS field and add PAD automatically for outgoing frames.
- * Default: enabled (set) */
+ * Default: enabled (set)
+ */
 #define XAE_OPTION_FCS_INSERT			(1 << 6)

 /* Enable Length/Type error checking for incoming frames. When this option is
  * set, the MAC will filter frames that have a mismatched type/length field
  * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
  * types of frames are encountered. When this option is cleared, the MAC will
- * allow these types of frames to be received. Default: enabled (set) */
+ * allow these types of frames to be received. Default: enabled (set)
+ */
 #define XAE_OPTION_LENTYPE_ERR			(1 << 7)

 /* Enable the transmitter. Default: enabled (set) */
@@ -159,12 +162,12 @@
 #define XAE_MDIO_MWD_OFFSET	0x00000508 /* MII Management Write Data */
 #define XAE_MDIO_MRD_OFFSET	0x0000050C /* MII Management Read Data */
 #define XAE_MDIO_MIS_OFFSET	0x00000600 /* MII Management Interrupt Status */
-#define XAE_MDIO_MIP_OFFSET	0x00000620 /* MII Mgmt Interrupt Pending
-					    * register offset */
-#define XAE_MDIO_MIE_OFFSET	0x00000640 /* MII Management Interrupt Enable
-					    * register offset */
-#define XAE_MDIO_MIC_OFFSET	0x00000660 /* MII Management Interrupt Clear
-					    * register offset. */
+/* MII Mgmt Interrupt Pending register offset */
+#define XAE_MDIO_MIP_OFFSET	0x00000620
+/* MII Management Interrupt Enable register offset */
+#define XAE_MDIO_MIE_OFFSET	0x00000640
+/* MII Management Interrupt Clear register offset. */
+#define XAE_MDIO_MIC_OFFSET	0x00000660
 #define XAE_UAW0_OFFSET		0x00000700 /* Unicast address word 0 */
 #define XAE_UAW1_OFFSET		0x00000704 /* Unicast address word 1 */
 #define XAE_FMI_OFFSET		0x00000708 /* Filter Mask Index */
@@ -176,18 +179,17 @@
 #define XAE_MCAST_TABLE_OFFSET	0x00020000 /* Multicast table address */

 /* Bit Masks for Axi Ethernet RAF register */
-#define XAE_RAF_MCSTREJ_MASK		0x00000002 /* Reject receive multicast
-						    * destination address */
-#define XAE_RAF_BCSTREJ_MASK		0x00000004 /* Reject receive broadcast
-						    * destination address */
+/* Reject receive multicast destination address */
+#define XAE_RAF_MCSTREJ_MASK		0x00000002
+/* Reject receive broadcast destination address */
+#define XAE_RAF_BCSTREJ_MASK		0x00000004
 #define XAE_RAF_TXVTAGMODE_MASK		0x00000018 /* Tx VLAN TAG mode */
 #define XAE_RAF_RXVTAGMODE_MASK		0x00000060 /* Rx VLAN TAG mode */
 #define XAE_RAF_TXVSTRPMODE_MASK	0x00000180 /* Tx VLAN STRIP mode */
 #define XAE_RAF_RXVSTRPMODE_MASK	0x00000600 /* Rx VLAN STRIP mode */
 #define XAE_RAF_NEWFNCENBL_MASK		0x00000800 /* New function mode */
-#define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000 /* Exteneded Multicast
-						    * Filtering mode
-						    */
+/* Exteneded Multicast Filtering mode */
+#define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000
 #define XAE_RAF_STATSRST_MASK		0x00002000 /* Stats. Counter Reset */
 #define XAE_RAF_RXBADFRMEN_MASK		0x00004000 /* Recv Bad Frame Enable */
 #define XAE_RAF_TXVTAGMODE_SHIFT	3 /* Tx Tag mode shift bits */
@@ -197,15 +199,16 @@

 /* Bit Masks for Axi Ethernet TPF and IFGP registers */
 #define XAE_TPF_TPFV_MASK		0x0000FFFF /* Tx pause frame value */
-#define XAE_IFGP0_IFGP_MASK		0x0000007F /* Transmit inter-frame
-						    * gap adjustment value */
+/* Transmit inter-frame gap adjustment value */
+#define XAE_IFGP0_IFGP_MASK		0x0000007F

 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
- * for all 3 registers. */
-#define XAE_INT_HARDACSCMPLT_MASK	0x00000001 /* Hard register access
-						    * complete */
-#define XAE_INT_AUTONEG_MASK		0x00000002 /* Auto negotiation
-						    * complete */
+ * for all 3 registers.
+ */
+/* Hard register access complete */
+#define XAE_INT_HARDACSCMPLT_MASK	0x00000001
+/* Auto negotiation complete */
+#define XAE_INT_AUTONEG_MASK		0x00000002
 #define XAE_INT_RXCMPIT_MASK		0x00000004 /* Rx complete */
 #define XAE_INT_RXRJECT_MASK		0x00000008 /* Rx frame rejected */
 #define XAE_INT_RXFIFOOVR_MASK		0x00000010 /* Rx fifo overrun */
@@ -215,10 +218,9 @@
 #define XAE_INT_PHYRSTCMPLT_MASK	0x00000100 /* Phy Reset complete */
 #define XAE_INT_ALL_MASK		0x0000003F /* All the ints */

+/* INT bits that indicate receive errors */
 #define XAE_INT_RECV_ERROR_MASK				\
-	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
-							 * indicate receive
-							 * errors */
+	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK)

 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
 #define XAE_TPID_0_MASK		0x0000FFFF /* TPID 0 */
@@ -231,27 +233,28 @@
 /* Bit masks for Axi Ethernet RCW1 register */
 #define XAE_RCW1_RST_MASK	0x80000000 /* Reset */
 #define XAE_RCW1_JUM_MASK	0x40000000 /* Jumbo frame enable */
-#define XAE_RCW1_FCS_MASK	0x20000000 /* In-Band FCS enable
-					    * (FCS not stripped) */
+/* In-Band FCS enable (FCS not stripped) */
+#define XAE_RCW1_FCS_MASK	0x20000000
 #define XAE_RCW1_RX_MASK	0x10000000 /* Receiver enable */
 #define XAE_RCW1_VLAN_MASK	0x08000000 /* VLAN frame enable */
-#define XAE_RCW1_LT_DIS_MASK	0x02000000 /* Length/type field valid check
-					    * disable */
-#define XAE_RCW1_CL_DIS_MASK	0x01000000 /* Control frame Length check
-					    * disable */
-#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
-					    * bits [47:32]. Bits [31:0] are
-					    * stored in register RCW0 */
+/* Length/type field valid check disable */
+#define XAE_RCW1_LT_DIS_MASK	0x02000000
+/* Control frame Length check disable */
+#define XAE_RCW1_CL_DIS_MASK	0x01000000
+/* Pause frame source address bits [47:32]. Bits [31:0] are
+ * stored in register RCW0
+ */
+#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF

 /* Bit masks for Axi Ethernet TC register */
 #define XAE_TC_RST_MASK		0x80000000 /* Reset */
 #define XAE_TC_JUM_MASK		0x40000000 /* Jumbo frame enable */
-#define XAE_TC_FCS_MASK		0x20000000 /* In-Band FCS enable
-					    * (FCS not generated) */
+/* In-Band FCS enable (FCS not generated) */
+#define XAE_TC_FCS_MASK		0x20000000
 #define XAE_TC_TX_MASK		0x10000000 /* Transmitter enable */
 #define XAE_TC_VLAN_MASK	0x08000000 /* VLAN frame enable */
-#define XAE_TC_IFG_MASK		0x02000000 /* Inter-frame gap adjustment
-					    * enable */
+/* Inter-frame gap adjustment enable */
+#define XAE_TC_IFG_MASK		0x02000000

 /* Bit masks for Axi Ethernet FCC register */
 #define XAE_FCC_FCRX_MASK	0x20000000 /* Rx flow control enable */
@@ -301,10 +304,10 @@
 #define XAE_MDIO_INT_MIIM_RDY_MASK	0x00000001 /* MIIM Interrupt */

 /* Bit masks for Axi Ethernet UAW1 register */
-#define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF /* Station address bits
-						    * [47:32]; Station address
-						    * bits [31:0] are stored in
-						    * register UAW0 */
+/* Station address bits [47:32]; Station address
+ * bits [31:0] are stored in register UAW0
+ */
+#define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF

 /* Bit masks for Axi Ethernet FMI register */
 #define XAE_FMI_PM_MASK			0x80000000 /* Promis. mode enable */
@@ -320,8 +323,8 @@
 #define XAE_PHY_TYPE_SGMII		4
 #define XAE_PHY_TYPE_1000BASE_X		5

-#define XAE_MULTICAST_CAM_TABLE_NUM	4 /* Total number of entries in the
-					   * hardware multicast table. */
+ /* Total number of entries in the hardware multicast table. */
+#define XAE_MULTICAST_CAM_TABLE_NUM	4

 /* Axi Ethernet Synthesis features */
 #define XAE_FEATURE_PARTIAL_RX_CSUM	(1 << 0)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6059a0f..4fd8a1d 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -198,9 +198,7 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 	lp->tx_bd_tail = 0;
 	lp->rx_bd_ci = 0;

-	/*
-	 * Allocate the Tx and Rx buffer descriptors.
-	 */
+	/* Allocate the Tx and Rx buffer descriptors. */
 	lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
 					  sizeof(*lp->tx_bd_v) * TX_BD_NUM,
 					  &lp->tx_bd_p, GFP_KERNEL);
@@ -263,7 +261,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

 	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
-	 * halted state. This will make the Rx side ready for reception.*/
+	 * halted state. This will make the Rx side ready for reception.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -273,7 +272,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)

 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
-	 * tail pointer register that the Tx channel will start transmitting */
+	 * tail pointer register that the Tx channel will start transmitting.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -354,7 +354,8 @@ static void axienet_set_multicast_list(struct net_device *ndev)
 	    netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
 		/* We must make the kernel realize we had to move into
 		 * promiscuous mode. If it was a promiscuous mode request
-		 * the flag is already set. If not we set it. */
+		 * the flag is already set. If not we set it.
+		 */
 		ndev->flags |= IFF_PROMISC;
 		reg = axienet_ior(lp, XAE_FMI_OFFSET);
 		reg |= XAE_FMI_PM_MASK;
@@ -438,7 +439,8 @@ static void __axienet_device_reset(struct axienet_local *lp,
 	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
 	 * process of Axi DMA takes a while to complete as all pending
 	 * commands/transfers will be flushed or completed during this
-	 * reset process. */
+	 * reset process.
+	 */
 	axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK);
 	timeout = DELAY_OF_ONE_MILLISEC;
 	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
@@ -499,7 +501,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

 	/* Sync default options with HW but leave receiver and
-	 * transmitter disabled.*/
+	 * transmitter disabled.
+	 */
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 	axienet_set_mac_address(ndev, NULL);
@@ -919,7 +922,8 @@ static int axienet_open(struct net_device *ndev)
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
 	 * including the MDIO. If MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards. */
+	 * process is started, MDIO will be broken afterwards.
+	 */
 	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
 		    (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK)));
 	axienet_device_reset(ndev);
@@ -1365,7 +1369,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
 	 * including the MDIO. So if MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards. */
+	 * process is started, MDIO will be broken afterwards.
+	 */
 	axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg &
 		    ~XAE_MDIO_MC_MDIOEN_MASK));

@@ -1436,7 +1441,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

 	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
-	 * halted state. This will make the Rx side ready for reception.*/
+	 * halted state. This will make the Rx side ready for reception.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -1446,7 +1452,8 @@ static void axienet_dma_err_handler(unsigned long data)

 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
-	 * tail pointer register that the Tx channel will start transmitting */
+	 * tail pointer register that the Tx channel will start transmitting
+	 */
 	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -1462,7 +1469,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

 	/* Sync default options with HW but leave receiver and
-	 * transmitter disabled.*/
+	 * transmitter disabled.
+	 */
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 	axienet_set_mac_address(ndev, NULL);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index ef0a20c..d6b72b0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -183,7 +183,8 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 	clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
 	/* If there is any remainder from the division of
 	 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
-	 * 1 to the clock divisor or we will surely be above 2.5 MHz */
+	 * 1 to the clock divisor or we will surely be above 2.5 MHz
+	 */
 	if (host_clock % (MAX_MDIO_FREQ * 2))
 		clk_div++;

--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 09/14] net: axienet: Fix comments blocks
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

There is rule for network drivers with comments blocks
which is newly checked by checkpatch.pl script.
Let's fix it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      | 93 ++++++++++++-----------
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++----
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  3 +-
 3 files changed, 71 insertions(+), 59 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index b3c50bd..995a6e7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -38,18 +38,21 @@
 #define XAE_OPTION_FLOW_CONTROL			(1 << 4)

 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
- * stripped. Default: disabled (set) */
+ * stripped. Default: disabled (set)
+ */
 #define XAE_OPTION_FCS_STRIP			(1 << 5)

 /* Generate FCS field and add PAD automatically for outgoing frames.
- * Default: enabled (set) */
+ * Default: enabled (set)
+ */
 #define XAE_OPTION_FCS_INSERT			(1 << 6)

 /* Enable Length/Type error checking for incoming frames. When this option is
  * set, the MAC will filter frames that have a mismatched type/length field
  * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
  * types of frames are encountered. When this option is cleared, the MAC will
- * allow these types of frames to be received. Default: enabled (set) */
+ * allow these types of frames to be received. Default: enabled (set)
+ */
 #define XAE_OPTION_LENTYPE_ERR			(1 << 7)

 /* Enable the transmitter. Default: enabled (set) */
@@ -159,12 +162,12 @@
 #define XAE_MDIO_MWD_OFFSET	0x00000508 /* MII Management Write Data */
 #define XAE_MDIO_MRD_OFFSET	0x0000050C /* MII Management Read Data */
 #define XAE_MDIO_MIS_OFFSET	0x00000600 /* MII Management Interrupt Status */
-#define XAE_MDIO_MIP_OFFSET	0x00000620 /* MII Mgmt Interrupt Pending
-					    * register offset */
-#define XAE_MDIO_MIE_OFFSET	0x00000640 /* MII Management Interrupt Enable
-					    * register offset */
-#define XAE_MDIO_MIC_OFFSET	0x00000660 /* MII Management Interrupt Clear
-					    * register offset. */
+/* MII Mgmt Interrupt Pending register offset */
+#define XAE_MDIO_MIP_OFFSET	0x00000620
+/* MII Management Interrupt Enable register offset */
+#define XAE_MDIO_MIE_OFFSET	0x00000640
+/* MII Management Interrupt Clear register offset. */
+#define XAE_MDIO_MIC_OFFSET	0x00000660
 #define XAE_UAW0_OFFSET		0x00000700 /* Unicast address word 0 */
 #define XAE_UAW1_OFFSET		0x00000704 /* Unicast address word 1 */
 #define XAE_FMI_OFFSET		0x00000708 /* Filter Mask Index */
@@ -176,18 +179,17 @@
 #define XAE_MCAST_TABLE_OFFSET	0x00020000 /* Multicast table address */

 /* Bit Masks for Axi Ethernet RAF register */
-#define XAE_RAF_MCSTREJ_MASK		0x00000002 /* Reject receive multicast
-						    * destination address */
-#define XAE_RAF_BCSTREJ_MASK		0x00000004 /* Reject receive broadcast
-						    * destination address */
+/* Reject receive multicast destination address */
+#define XAE_RAF_MCSTREJ_MASK		0x00000002
+/* Reject receive broadcast destination address */
+#define XAE_RAF_BCSTREJ_MASK		0x00000004
 #define XAE_RAF_TXVTAGMODE_MASK		0x00000018 /* Tx VLAN TAG mode */
 #define XAE_RAF_RXVTAGMODE_MASK		0x00000060 /* Rx VLAN TAG mode */
 #define XAE_RAF_TXVSTRPMODE_MASK	0x00000180 /* Tx VLAN STRIP mode */
 #define XAE_RAF_RXVSTRPMODE_MASK	0x00000600 /* Rx VLAN STRIP mode */
 #define XAE_RAF_NEWFNCENBL_MASK		0x00000800 /* New function mode */
-#define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000 /* Exteneded Multicast
-						    * Filtering mode
-						    */
+/* Exteneded Multicast Filtering mode */
+#define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000
 #define XAE_RAF_STATSRST_MASK		0x00002000 /* Stats. Counter Reset */
 #define XAE_RAF_RXBADFRMEN_MASK		0x00004000 /* Recv Bad Frame Enable */
 #define XAE_RAF_TXVTAGMODE_SHIFT	3 /* Tx Tag mode shift bits */
@@ -197,15 +199,16 @@

 /* Bit Masks for Axi Ethernet TPF and IFGP registers */
 #define XAE_TPF_TPFV_MASK		0x0000FFFF /* Tx pause frame value */
-#define XAE_IFGP0_IFGP_MASK		0x0000007F /* Transmit inter-frame
-						    * gap adjustment value */
+/* Transmit inter-frame gap adjustment value */
+#define XAE_IFGP0_IFGP_MASK		0x0000007F

 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
- * for all 3 registers. */
-#define XAE_INT_HARDACSCMPLT_MASK	0x00000001 /* Hard register access
-						    * complete */
-#define XAE_INT_AUTONEG_MASK		0x00000002 /* Auto negotiation
-						    * complete */
+ * for all 3 registers.
+ */
+/* Hard register access complete */
+#define XAE_INT_HARDACSCMPLT_MASK	0x00000001
+/* Auto negotiation complete */
+#define XAE_INT_AUTONEG_MASK		0x00000002
 #define XAE_INT_RXCMPIT_MASK		0x00000004 /* Rx complete */
 #define XAE_INT_RXRJECT_MASK		0x00000008 /* Rx frame rejected */
 #define XAE_INT_RXFIFOOVR_MASK		0x00000010 /* Rx fifo overrun */
@@ -215,10 +218,9 @@
 #define XAE_INT_PHYRSTCMPLT_MASK	0x00000100 /* Phy Reset complete */
 #define XAE_INT_ALL_MASK		0x0000003F /* All the ints */

+/* INT bits that indicate receive errors */
 #define XAE_INT_RECV_ERROR_MASK				\
-	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
-							 * indicate receive
-							 * errors */
+	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK)

 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
 #define XAE_TPID_0_MASK		0x0000FFFF /* TPID 0 */
@@ -231,27 +233,28 @@
 /* Bit masks for Axi Ethernet RCW1 register */
 #define XAE_RCW1_RST_MASK	0x80000000 /* Reset */
 #define XAE_RCW1_JUM_MASK	0x40000000 /* Jumbo frame enable */
-#define XAE_RCW1_FCS_MASK	0x20000000 /* In-Band FCS enable
-					    * (FCS not stripped) */
+/* In-Band FCS enable (FCS not stripped) */
+#define XAE_RCW1_FCS_MASK	0x20000000
 #define XAE_RCW1_RX_MASK	0x10000000 /* Receiver enable */
 #define XAE_RCW1_VLAN_MASK	0x08000000 /* VLAN frame enable */
-#define XAE_RCW1_LT_DIS_MASK	0x02000000 /* Length/type field valid check
-					    * disable */
-#define XAE_RCW1_CL_DIS_MASK	0x01000000 /* Control frame Length check
-					    * disable */
-#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
-					    * bits [47:32]. Bits [31:0] are
-					    * stored in register RCW0 */
+/* Length/type field valid check disable */
+#define XAE_RCW1_LT_DIS_MASK	0x02000000
+/* Control frame Length check disable */
+#define XAE_RCW1_CL_DIS_MASK	0x01000000
+/* Pause frame source address bits [47:32]. Bits [31:0] are
+ * stored in register RCW0
+ */
+#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF

 /* Bit masks for Axi Ethernet TC register */
 #define XAE_TC_RST_MASK		0x80000000 /* Reset */
 #define XAE_TC_JUM_MASK		0x40000000 /* Jumbo frame enable */
-#define XAE_TC_FCS_MASK		0x20000000 /* In-Band FCS enable
-					    * (FCS not generated) */
+/* In-Band FCS enable (FCS not generated) */
+#define XAE_TC_FCS_MASK		0x20000000
 #define XAE_TC_TX_MASK		0x10000000 /* Transmitter enable */
 #define XAE_TC_VLAN_MASK	0x08000000 /* VLAN frame enable */
-#define XAE_TC_IFG_MASK		0x02000000 /* Inter-frame gap adjustment
-					    * enable */
+/* Inter-frame gap adjustment enable */
+#define XAE_TC_IFG_MASK		0x02000000

 /* Bit masks for Axi Ethernet FCC register */
 #define XAE_FCC_FCRX_MASK	0x20000000 /* Rx flow control enable */
@@ -301,10 +304,10 @@
 #define XAE_MDIO_INT_MIIM_RDY_MASK	0x00000001 /* MIIM Interrupt */

 /* Bit masks for Axi Ethernet UAW1 register */
-#define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF /* Station address bits
-						    * [47:32]; Station address
-						    * bits [31:0] are stored in
-						    * register UAW0 */
+/* Station address bits [47:32]; Station address
+ * bits [31:0] are stored in register UAW0
+ */
+#define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF

 /* Bit masks for Axi Ethernet FMI register */
 #define XAE_FMI_PM_MASK			0x80000000 /* Promis. mode enable */
@@ -320,8 +323,8 @@
 #define XAE_PHY_TYPE_SGMII		4
 #define XAE_PHY_TYPE_1000BASE_X		5

-#define XAE_MULTICAST_CAM_TABLE_NUM	4 /* Total number of entries in the
-					   * hardware multicast table. */
+ /* Total number of entries in the hardware multicast table. */
+#define XAE_MULTICAST_CAM_TABLE_NUM	4

 /* Axi Ethernet Synthesis features */
 #define XAE_FEATURE_PARTIAL_RX_CSUM	(1 << 0)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6059a0f..4fd8a1d 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -198,9 +198,7 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 	lp->tx_bd_tail = 0;
 	lp->rx_bd_ci = 0;

-	/*
-	 * Allocate the Tx and Rx buffer descriptors.
-	 */
+	/* Allocate the Tx and Rx buffer descriptors. */
 	lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
 					  sizeof(*lp->tx_bd_v) * TX_BD_NUM,
 					  &lp->tx_bd_p, GFP_KERNEL);
@@ -263,7 +261,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

 	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
-	 * halted state. This will make the Rx side ready for reception.*/
+	 * halted state. This will make the Rx side ready for reception.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -273,7 +272,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)

 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
-	 * tail pointer register that the Tx channel will start transmitting */
+	 * tail pointer register that the Tx channel will start transmitting.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -354,7 +354,8 @@ static void axienet_set_multicast_list(struct net_device *ndev)
 	    netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
 		/* We must make the kernel realize we had to move into
 		 * promiscuous mode. If it was a promiscuous mode request
-		 * the flag is already set. If not we set it. */
+		 * the flag is already set. If not we set it.
+		 */
 		ndev->flags |= IFF_PROMISC;
 		reg = axienet_ior(lp, XAE_FMI_OFFSET);
 		reg |= XAE_FMI_PM_MASK;
@@ -438,7 +439,8 @@ static void __axienet_device_reset(struct axienet_local *lp,
 	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
 	 * process of Axi DMA takes a while to complete as all pending
 	 * commands/transfers will be flushed or completed during this
-	 * reset process. */
+	 * reset process.
+	 */
 	axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK);
 	timeout = DELAY_OF_ONE_MILLISEC;
 	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
@@ -499,7 +501,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

 	/* Sync default options with HW but leave receiver and
-	 * transmitter disabled.*/
+	 * transmitter disabled.
+	 */
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 	axienet_set_mac_address(ndev, NULL);
@@ -919,7 +922,8 @@ static int axienet_open(struct net_device *ndev)
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
 	 * including the MDIO. If MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards. */
+	 * process is started, MDIO will be broken afterwards.
+	 */
 	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
 		    (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK)));
 	axienet_device_reset(ndev);
@@ -1365,7 +1369,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
 	 * including the MDIO. So if MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards. */
+	 * process is started, MDIO will be broken afterwards.
+	 */
 	axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg &
 		    ~XAE_MDIO_MC_MDIOEN_MASK));

@@ -1436,7 +1441,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

 	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
-	 * halted state. This will make the Rx side ready for reception.*/
+	 * halted state. This will make the Rx side ready for reception.
+	 */
 	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -1446,7 +1452,8 @@ static void axienet_dma_err_handler(unsigned long data)

 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
-	 * tail pointer register that the Tx channel will start transmitting */
+	 * tail pointer register that the Tx channel will start transmitting
+	 */
 	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
 	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -1462,7 +1469,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

 	/* Sync default options with HW but leave receiver and
-	 * transmitter disabled.*/
+	 * transmitter disabled.
+	 */
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 	axienet_set_mac_address(ndev, NULL);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index ef0a20c..d6b72b0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -183,7 +183,8 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 	clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
 	/* If there is any remainder from the division of
 	 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
-	 * 1 to the clock divisor or we will surely be above 2.5 MHz */
+	 * 1 to the clock divisor or we will surely be above 2.5 MHz
+	 */
 	if (host_clock % (MAX_MDIO_FREQ * 2))
 		clk_div++;

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/25b9c083/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 10/14] net: axienet: Use pdev instead of op
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, Grant Likely, Rob Herring,
	linux-arm-kernel, linux-kernel, devicetree

[-- Attachment #1: Type: text/plain, Size: 5876 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Synchronize names with other drivers

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 49 ++++++++++++-----------
 1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4fd8a1d..324033c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1480,7 +1480,7 @@ static void axienet_dma_err_handler(unsigned long data)

 /**
  * axienet_of_probe - Axi Ethernet probe function.
- * @op:		Pointer to platform device structure.
+ * @pdev:	Pointer to platform device structure.
  * @match:	Pointer to device id structure
  *
  * returns: 0, on success
@@ -1491,7 +1491,7 @@ static void axienet_dma_err_handler(unsigned long data)
  * device. Parses through device tree and populates fields of
  * axienet_local. It registers the Ethernet device.
  */
-static int axienet_of_probe(struct platform_device *op)
+static int axienet_of_probe(struct platform_device *pdev)
 {
 	__be32 *p;
 	int size, ret = 0;
@@ -1505,9 +1505,9 @@ static int axienet_of_probe(struct platform_device *op)
 		return -ENOMEM;

 	ether_setup(ndev);
-	platform_set_drvdata(op, ndev);
+	platform_set_drvdata(pdev, ndev);

-	SET_NETDEV_DEV(ndev, &op->dev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
 	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
 	ndev->features = NETIF_F_SG;
 	ndev->netdev_ops = &axienet_netdev_ops;
@@ -1515,18 +1515,18 @@ static int axienet_of_probe(struct platform_device *op)

 	lp = netdev_priv(ndev);
 	lp->ndev = ndev;
-	lp->dev = &op->dev;
+	lp->dev = &pdev->dev;
 	lp->options = XAE_OPTION_DEFAULTS;
 	/* Map device registers */
-	lp->regs = of_iomap(op->dev.of_node, 0);
+	lp->regs = of_iomap(pdev->dev.of_node, 0);
 	if (!lp->regs) {
-		dev_err(&op->dev, "could not map Axi Ethernet regs.\n");
+		dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n");
 		goto nodev;
 	}
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,txcsum", NULL);
 	if (p) {
 		switch (be32_to_cpup(p)) {
 		case 1:
@@ -1547,7 +1547,7 @@ static int axienet_of_probe(struct platform_device *op)
 			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
 		}
 	}
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxcsum", NULL);
 	if (p) {
 		switch (be32_to_cpup(p)) {
 		case 1:
@@ -1570,43 +1570,44 @@ static int axienet_of_probe(struct platform_device *op)
 	 * Here we check for memory allocated for Rx/Tx in the hardware from
 	 * the device-tree and accordingly set flags.
 	 */
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxmem", NULL);
 	if (p)
 		lp->rxmem = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,temac-type",
 				       NULL);
 	if (p)
 		lp->temac_type = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node,
+						"xlnx,phy-type", NULL);
 	if (p)
 		lp->phy_type = be32_to_cpup(p);

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
-	np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0);
+	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
 	if (!np) {
-		dev_err(&op->dev, "could not find DMA node\n");
+		dev_err(&pdev->dev, "could not find DMA node\n");
 		goto err_iounmap;
 	}
 	lp->dma_regs = of_iomap(np, 0);
 	if (lp->dma_regs) {
-		dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs);
+		dev_dbg(&pdev->dev, "MEM base: %p\n", lp->dma_regs);
 	} else {
-		dev_err(&op->dev, "unable to map DMA registers\n");
+		dev_err(&pdev->dev, "unable to map DMA registers\n");
 		of_node_put(np);
 	}
 	lp->rx_irq = irq_of_parse_and_map(np, 1);
 	lp->tx_irq = irq_of_parse_and_map(np, 0);
 	of_node_put(np);
 	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
-		dev_err(&op->dev, "could not determine irqs\n");
+		dev_err(&pdev->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
 		goto err_iounmap_2;
 	}

 	/* Retrieve the MAC address */
-	addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
+	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &size);
 	if ((!addr) || (size != 6)) {
-		dev_err(&op->dev, "could not find MAC address\n");
+		dev_err(&pdev->dev, "could not find MAC address\n");
 		ret = -ENODEV;
 		goto err_iounmap_2;
 	}
@@ -1615,11 +1616,11 @@ static int axienet_of_probe(struct platform_device *op)
 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

-	lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
+	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
 	if (lp->phy_node)
-		ret = axienet_mdio_setup(lp, op->dev.of_node);
+		ret = axienet_mdio_setup(lp, pdev->dev.of_node);
 	if (ret)
-		dev_warn(&op->dev, "error registering MDIO bus\n");
+		dev_warn(&pdev->dev, "error registering MDIO bus\n");

 	ret = register_netdev(lp->ndev);
 	if (ret) {
@@ -1640,9 +1641,9 @@ nodev:
 	return ret;
 }

-static int axienet_of_remove(struct platform_device *op)
+static int axienet_of_remove(struct platform_device *pdev)
 {
-	struct net_device *ndev = platform_get_drvdata(op);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct axienet_local *lp = netdev_priv(ndev);

 	axienet_mdio_teardown(lp);
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 10/14] net: axienet: Use pdev instead of op
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Synchronize names with other drivers

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 49 ++++++++++++-----------
 1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4fd8a1d..324033c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1480,7 +1480,7 @@ static void axienet_dma_err_handler(unsigned long data)

 /**
  * axienet_of_probe - Axi Ethernet probe function.
- * @op:		Pointer to platform device structure.
+ * @pdev:	Pointer to platform device structure.
  * @match:	Pointer to device id structure
  *
  * returns: 0, on success
@@ -1491,7 +1491,7 @@ static void axienet_dma_err_handler(unsigned long data)
  * device. Parses through device tree and populates fields of
  * axienet_local. It registers the Ethernet device.
  */
-static int axienet_of_probe(struct platform_device *op)
+static int axienet_of_probe(struct platform_device *pdev)
 {
 	__be32 *p;
 	int size, ret = 0;
@@ -1505,9 +1505,9 @@ static int axienet_of_probe(struct platform_device *op)
 		return -ENOMEM;

 	ether_setup(ndev);
-	platform_set_drvdata(op, ndev);
+	platform_set_drvdata(pdev, ndev);

-	SET_NETDEV_DEV(ndev, &op->dev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
 	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
 	ndev->features = NETIF_F_SG;
 	ndev->netdev_ops = &axienet_netdev_ops;
@@ -1515,18 +1515,18 @@ static int axienet_of_probe(struct platform_device *op)

 	lp = netdev_priv(ndev);
 	lp->ndev = ndev;
-	lp->dev = &op->dev;
+	lp->dev = &pdev->dev;
 	lp->options = XAE_OPTION_DEFAULTS;
 	/* Map device registers */
-	lp->regs = of_iomap(op->dev.of_node, 0);
+	lp->regs = of_iomap(pdev->dev.of_node, 0);
 	if (!lp->regs) {
-		dev_err(&op->dev, "could not map Axi Ethernet regs.\n");
+		dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n");
 		goto nodev;
 	}
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,txcsum", NULL);
 	if (p) {
 		switch (be32_to_cpup(p)) {
 		case 1:
@@ -1547,7 +1547,7 @@ static int axienet_of_probe(struct platform_device *op)
 			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
 		}
 	}
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxcsum", NULL);
 	if (p) {
 		switch (be32_to_cpup(p)) {
 		case 1:
@@ -1570,43 +1570,44 @@ static int axienet_of_probe(struct platform_device *op)
 	 * Here we check for memory allocated for Rx/Tx in the hardware from
 	 * the device-tree and accordingly set flags.
 	 */
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxmem", NULL);
 	if (p)
 		lp->rxmem = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
+	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,temac-type",
 				       NULL);
 	if (p)
 		lp->temac_type = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL);
+	p = (__be32 *) of_get_property(pdev->dev.of_node,
+						"xlnx,phy-type", NULL);
 	if (p)
 		lp->phy_type = be32_to_cpup(p);

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
-	np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0);
+	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
 	if (!np) {
-		dev_err(&op->dev, "could not find DMA node\n");
+		dev_err(&pdev->dev, "could not find DMA node\n");
 		goto err_iounmap;
 	}
 	lp->dma_regs = of_iomap(np, 0);
 	if (lp->dma_regs) {
-		dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs);
+		dev_dbg(&pdev->dev, "MEM base: %p\n", lp->dma_regs);
 	} else {
-		dev_err(&op->dev, "unable to map DMA registers\n");
+		dev_err(&pdev->dev, "unable to map DMA registers\n");
 		of_node_put(np);
 	}
 	lp->rx_irq = irq_of_parse_and_map(np, 1);
 	lp->tx_irq = irq_of_parse_and_map(np, 0);
 	of_node_put(np);
 	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
-		dev_err(&op->dev, "could not determine irqs\n");
+		dev_err(&pdev->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
 		goto err_iounmap_2;
 	}

 	/* Retrieve the MAC address */
-	addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
+	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &size);
 	if ((!addr) || (size != 6)) {
-		dev_err(&op->dev, "could not find MAC address\n");
+		dev_err(&pdev->dev, "could not find MAC address\n");
 		ret = -ENODEV;
 		goto err_iounmap_2;
 	}
@@ -1615,11 +1616,11 @@ static int axienet_of_probe(struct platform_device *op)
 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

-	lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
+	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
 	if (lp->phy_node)
-		ret = axienet_mdio_setup(lp, op->dev.of_node);
+		ret = axienet_mdio_setup(lp, pdev->dev.of_node);
 	if (ret)
-		dev_warn(&op->dev, "error registering MDIO bus\n");
+		dev_warn(&pdev->dev, "error registering MDIO bus\n");

 	ret = register_netdev(lp->ndev);
 	if (ret) {
@@ -1640,9 +1641,9 @@ nodev:
 	return ret;
 }

-static int axienet_of_remove(struct platform_device *op)
+static int axienet_of_remove(struct platform_device *pdev)
 {
-	struct net_device *ndev = platform_get_drvdata(op);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct axienet_local *lp = netdev_priv(ndev);

 	axienet_mdio_teardown(lp);
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/eeb2829b/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 11/14] net: axienet: Use devm_* calls
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3968 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

use devm_* calls

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 54 ++++++++++++-----------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 324033c..936a14c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1499,6 +1499,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	struct axienet_local *lp;
 	struct net_device *ndev;
 	const void *addr;
+	struct resource *ethres, dmares;

 	ndev = alloc_etherdev(sizeof(*lp));
 	if (!ndev)
@@ -1518,11 +1519,14 @@ static int axienet_of_probe(struct platform_device *pdev)
 	lp->dev = &pdev->dev;
 	lp->options = XAE_OPTION_DEFAULTS;
 	/* Map device registers */
-	lp->regs = of_iomap(pdev->dev.of_node, 0);
+	ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lp->regs = devm_ioremap_resource(&pdev->dev, ethres);
 	if (!lp->regs) {
 		dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n");
-		goto nodev;
+		ret = -ENOMEM;
+		goto free_netdev;
 	}
+
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

@@ -1584,16 +1588,21 @@ static int axienet_of_probe(struct platform_device *pdev)

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
 	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
-	if (!np) {
+	if (IS_ERR(np)) {
 		dev_err(&pdev->dev, "could not find DMA node\n");
-		goto err_iounmap;
+		ret = PTR_ERR(np);
+		goto free_netdev;
 	}
-	lp->dma_regs = of_iomap(np, 0);
-	if (lp->dma_regs) {
-		dev_dbg(&pdev->dev, "MEM base: %p\n", lp->dma_regs);
-	} else {
-		dev_err(&pdev->dev, "unable to map DMA registers\n");
-		of_node_put(np);
+	ret = of_address_to_resource(np, 0, &dmares);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get DMA resource\n");
+		goto free_netdev;
+	}
+	lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares);
+	if (!lp->dma_regs) {
+		dev_err(&pdev->dev, "could not map DMA regs\n");
+		ret = -ENOMEM;
+		goto free_netdev;
 	}
 	lp->rx_irq = irq_of_parse_and_map(np, 1);
 	lp->tx_irq = irq_of_parse_and_map(np, 0);
@@ -1601,7 +1610,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
 		dev_err(&pdev->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
-		goto err_iounmap_2;
+		goto free_netdev;
 	}

 	/* Retrieve the MAC address */
@@ -1609,7 +1618,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	if ((!addr) || (size != 6)) {
 		dev_err(&pdev->dev, "could not find MAC address\n");
 		ret = -ENODEV;
-		goto err_iounmap_2;
+		goto free_netdev;
 	}
 	axienet_set_mac_address(ndev, (void *) addr);

@@ -1617,27 +1626,23 @@ static int axienet_of_probe(struct platform_device *pdev)
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

 	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
-	if (lp->phy_node)
+	if (lp->phy_node) {
 		ret = axienet_mdio_setup(lp, pdev->dev.of_node);
-	if (ret)
-		dev_warn(&pdev->dev, "error registering MDIO bus\n");
+		if (ret)
+			dev_warn(&pdev->dev, "error registering MDIO bus\n");
+	}

 	ret = register_netdev(lp->ndev);
 	if (ret) {
 		dev_err(lp->dev, "register_netdev() error (%i)\n", ret);
-		goto err_iounmap_2;
+		goto free_netdev;
 	}

 	return 0;

-err_iounmap_2:
-	if (lp->dma_regs)
-		iounmap(lp->dma_regs);
-err_iounmap:
-	iounmap(lp->regs);
-nodev:
+free_netdev:
 	free_netdev(ndev);
-	ndev = NULL;
+
 	return ret;
 }

@@ -1653,9 +1658,6 @@ static int axienet_of_remove(struct platform_device *pdev)
 		of_node_put(lp->phy_node);
 	lp->phy_node = NULL;

-	iounmap(lp->regs);
-	if (lp->dma_regs)
-		iounmap(lp->dma_regs);
 	free_netdev(ndev);

 	return 0;
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 11/14] net: axienet: Use devm_* calls
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

use devm_* calls

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 54 ++++++++++++-----------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 324033c..936a14c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1499,6 +1499,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	struct axienet_local *lp;
 	struct net_device *ndev;
 	const void *addr;
+	struct resource *ethres, dmares;

 	ndev = alloc_etherdev(sizeof(*lp));
 	if (!ndev)
@@ -1518,11 +1519,14 @@ static int axienet_of_probe(struct platform_device *pdev)
 	lp->dev = &pdev->dev;
 	lp->options = XAE_OPTION_DEFAULTS;
 	/* Map device registers */
-	lp->regs = of_iomap(pdev->dev.of_node, 0);
+	ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lp->regs = devm_ioremap_resource(&pdev->dev, ethres);
 	if (!lp->regs) {
 		dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n");
-		goto nodev;
+		ret = -ENOMEM;
+		goto free_netdev;
 	}
+
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

@@ -1584,16 +1588,21 @@ static int axienet_of_probe(struct platform_device *pdev)

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
 	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
-	if (!np) {
+	if (IS_ERR(np)) {
 		dev_err(&pdev->dev, "could not find DMA node\n");
-		goto err_iounmap;
+		ret = PTR_ERR(np);
+		goto free_netdev;
 	}
-	lp->dma_regs = of_iomap(np, 0);
-	if (lp->dma_regs) {
-		dev_dbg(&pdev->dev, "MEM base: %p\n", lp->dma_regs);
-	} else {
-		dev_err(&pdev->dev, "unable to map DMA registers\n");
-		of_node_put(np);
+	ret = of_address_to_resource(np, 0, &dmares);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get DMA resource\n");
+		goto free_netdev;
+	}
+	lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares);
+	if (!lp->dma_regs) {
+		dev_err(&pdev->dev, "could not map DMA regs\n");
+		ret = -ENOMEM;
+		goto free_netdev;
 	}
 	lp->rx_irq = irq_of_parse_and_map(np, 1);
 	lp->tx_irq = irq_of_parse_and_map(np, 0);
@@ -1601,7 +1610,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
 		dev_err(&pdev->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
-		goto err_iounmap_2;
+		goto free_netdev;
 	}

 	/* Retrieve the MAC address */
@@ -1609,7 +1618,7 @@ static int axienet_of_probe(struct platform_device *pdev)
 	if ((!addr) || (size != 6)) {
 		dev_err(&pdev->dev, "could not find MAC address\n");
 		ret = -ENODEV;
-		goto err_iounmap_2;
+		goto free_netdev;
 	}
 	axienet_set_mac_address(ndev, (void *) addr);

@@ -1617,27 +1626,23 @@ static int axienet_of_probe(struct platform_device *pdev)
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;

 	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
-	if (lp->phy_node)
+	if (lp->phy_node) {
 		ret = axienet_mdio_setup(lp, pdev->dev.of_node);
-	if (ret)
-		dev_warn(&pdev->dev, "error registering MDIO bus\n");
+		if (ret)
+			dev_warn(&pdev->dev, "error registering MDIO bus\n");
+	}

 	ret = register_netdev(lp->ndev);
 	if (ret) {
 		dev_err(lp->dev, "register_netdev() error (%i)\n", ret);
-		goto err_iounmap_2;
+		goto free_netdev;
 	}

 	return 0;

-err_iounmap_2:
-	if (lp->dma_regs)
-		iounmap(lp->dma_regs);
-err_iounmap:
-	iounmap(lp->regs);
-nodev:
+free_netdev:
 	free_netdev(ndev);
-	ndev = NULL;
+
 	return ret;
 }

@@ -1653,9 +1658,6 @@ static int axienet_of_remove(struct platform_device *pdev)
 		of_node_put(lp->phy_node);
 	lp->phy_node = NULL;

-	iounmap(lp->regs);
-	if (lp->dma_regs)
-		iounmap(lp->dma_regs);
 	free_netdev(ndev);

 	return 0;
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/7b8a2828/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 12/14] net: axienet: Use of_property_* calls
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, Grant Likely, Rob Herring,
	linux-arm-kernel, linux-kernel, devicetree

[-- Attachment #1: Type: text/plain, Size: 3508 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Use of_property_* calls

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 41 ++++++++++-------------
 1 file changed, 17 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 936a14c..9a9ffbc 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1493,13 +1493,13 @@ static void axienet_dma_err_handler(unsigned long data)
  */
 static int axienet_of_probe(struct platform_device *pdev)
 {
-	__be32 *p;
-	int size, ret = 0;
+	int ret;
 	struct device_node *np;
 	struct axienet_local *lp;
 	struct net_device *ndev;
-	const void *addr;
+	u8 mac_addr[6];
 	struct resource *ethres, dmares;
+	u32 value;

 	ndev = alloc_etherdev(sizeof(*lp));
 	if (!ndev)
@@ -1530,9 +1530,9 @@ static int axienet_of_probe(struct platform_device *pdev)
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,txcsum", NULL);
-	if (p) {
-		switch (be32_to_cpup(p)) {
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,txcsum", &value);
+	if (!ret) {
+		switch (value) {
 		case 1:
 			lp->csum_offload_on_tx_path =
 				XAE_FEATURE_PARTIAL_TX_CSUM;
@@ -1551,9 +1551,9 @@ static int axienet_of_probe(struct platform_device *pdev)
 			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
 		}
 	}
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxcsum", NULL);
-	if (p) {
-		switch (be32_to_cpup(p)) {
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,rxcsum", &value);
+	if (!ret) {
+		switch (value) {
 		case 1:
 			lp->csum_offload_on_rx_path =
 				XAE_FEATURE_PARTIAL_RX_CSUM;
@@ -1574,17 +1574,10 @@ static int axienet_of_probe(struct platform_device *pdev)
 	 * Here we check for memory allocated for Rx/Tx in the hardware from
 	 * the device-tree and accordingly set flags.
 	 */
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxmem", NULL);
-	if (p)
-		lp->rxmem = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,temac-type",
-				       NULL);
-	if (p)
-		lp->temac_type = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(pdev->dev.of_node,
-						"xlnx,phy-type", NULL);
-	if (p)
-		lp->phy_type = be32_to_cpup(p);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,temac-type",
+					&lp->temac_type);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &lp->phy_type);

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
 	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
@@ -1614,13 +1607,13 @@ static int axienet_of_probe(struct platform_device *pdev)
 	}

 	/* Retrieve the MAC address */
-	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &size);
-	if ((!addr) || (size != 6)) {
+	ret = of_property_read_u8_array(pdev->dev.of_node,
+			"local-mac-address", mac_addr, 6);
+	if (ret) {
 		dev_err(&pdev->dev, "could not find MAC address\n");
-		ret = -ENODEV;
 		goto free_netdev;
 	}
-	axienet_set_mac_address(ndev, (void *) addr);
+	axienet_set_mac_address(ndev, (void *) mac_addr);

 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 12/14] net: axienet: Use of_property_* calls
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Use of_property_* calls

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 41 ++++++++++-------------
 1 file changed, 17 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 936a14c..9a9ffbc 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1493,13 +1493,13 @@ static void axienet_dma_err_handler(unsigned long data)
  */
 static int axienet_of_probe(struct platform_device *pdev)
 {
-	__be32 *p;
-	int size, ret = 0;
+	int ret;
 	struct device_node *np;
 	struct axienet_local *lp;
 	struct net_device *ndev;
-	const void *addr;
+	u8 mac_addr[6];
 	struct resource *ethres, dmares;
+	u32 value;

 	ndev = alloc_etherdev(sizeof(*lp));
 	if (!ndev)
@@ -1530,9 +1530,9 @@ static int axienet_of_probe(struct platform_device *pdev)
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;

-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,txcsum", NULL);
-	if (p) {
-		switch (be32_to_cpup(p)) {
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,txcsum", &value);
+	if (!ret) {
+		switch (value) {
 		case 1:
 			lp->csum_offload_on_tx_path =
 				XAE_FEATURE_PARTIAL_TX_CSUM;
@@ -1551,9 +1551,9 @@ static int axienet_of_probe(struct platform_device *pdev)
 			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
 		}
 	}
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxcsum", NULL);
-	if (p) {
-		switch (be32_to_cpup(p)) {
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,rxcsum", &value);
+	if (!ret) {
+		switch (value) {
 		case 1:
 			lp->csum_offload_on_rx_path =
 				XAE_FEATURE_PARTIAL_RX_CSUM;
@@ -1574,17 +1574,10 @@ static int axienet_of_probe(struct platform_device *pdev)
 	 * Here we check for memory allocated for Rx/Tx in the hardware from
 	 * the device-tree and accordingly set flags.
 	 */
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,rxmem", NULL);
-	if (p)
-		lp->rxmem = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(pdev->dev.of_node, "xlnx,temac-type",
-				       NULL);
-	if (p)
-		lp->temac_type = be32_to_cpup(p);
-	p = (__be32 *) of_get_property(pdev->dev.of_node,
-						"xlnx,phy-type", NULL);
-	if (p)
-		lp->phy_type = be32_to_cpup(p);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,temac-type",
+					&lp->temac_type);
+	of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &lp->phy_type);

 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
 	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
@@ -1614,13 +1607,13 @@ static int axienet_of_probe(struct platform_device *pdev)
 	}

 	/* Retrieve the MAC address */
-	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &size);
-	if ((!addr) || (size != 6)) {
+	ret = of_property_read_u8_array(pdev->dev.of_node,
+			"local-mac-address", mac_addr, 6);
+	if (ret) {
 		dev_err(&pdev->dev, "could not find MAC address\n");
-		ret = -ENODEV;
 		goto free_netdev;
 	}
-	axienet_set_mac_address(ndev, (void *) addr);
+	axienet_set_mac_address(ndev, (void *) mac_addr);

 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/53eca111/attachment.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 13/14] net: axienet: Removed _of_ prefix in probe and remove functions
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2141 bytes --]

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Synchronize names with other drivers.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9a9ffbc..6dd3eee 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1479,7 +1479,7 @@ static void axienet_dma_err_handler(unsigned long data)
 }

 /**
- * axienet_of_probe - Axi Ethernet probe function.
+ * axienet_probe - Axi Ethernet probe function.
  * @pdev:	Pointer to platform device structure.
  * @match:	Pointer to device id structure
  *
@@ -1491,7 +1491,7 @@ static void axienet_dma_err_handler(unsigned long data)
  * device. Parses through device tree and populates fields of
  * axienet_local. It registers the Ethernet device.
  */
-static int axienet_of_probe(struct platform_device *pdev)
+static int axienet_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct device_node *np;
@@ -1639,7 +1639,7 @@ free_netdev:
 	return ret;
 }

-static int axienet_of_remove(struct platform_device *pdev)
+static int axienet_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct axienet_local *lp = netdev_priv(ndev);
@@ -1656,9 +1656,9 @@ static int axienet_of_remove(struct platform_device *pdev)
 	return 0;
 }

-static struct platform_driver axienet_of_driver = {
-	.probe = axienet_of_probe,
-	.remove = axienet_of_remove,
+static struct platform_driver axienet_driver = {
+	.probe = axienet_probe,
+	.remove = axienet_remove,
 	.driver = {
 		 .owner = THIS_MODULE,
 		 .name = "xilinx_axienet",
@@ -1666,7 +1666,7 @@ static struct platform_driver axienet_of_driver = {
 	},
 };

-module_platform_driver(axienet_of_driver);
+module_platform_driver(axienet_driver);

 MODULE_DESCRIPTION("Xilinx Axi Ethernet driver");
 MODULE_AUTHOR("Xilinx");
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 13/14] net: axienet: Removed _of_ prefix in probe and remove functions
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Srikanth Thokala <srikanth.thokala@xilinx.com>

Synchronize names with other drivers.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9a9ffbc..6dd3eee 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1479,7 +1479,7 @@ static void axienet_dma_err_handler(unsigned long data)
 }

 /**
- * axienet_of_probe - Axi Ethernet probe function.
+ * axienet_probe - Axi Ethernet probe function.
  * @pdev:	Pointer to platform device structure.
  * @match:	Pointer to device id structure
  *
@@ -1491,7 +1491,7 @@ static void axienet_dma_err_handler(unsigned long data)
  * device. Parses through device tree and populates fields of
  * axienet_local. It registers the Ethernet device.
  */
-static int axienet_of_probe(struct platform_device *pdev)
+static int axienet_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct device_node *np;
@@ -1639,7 +1639,7 @@ free_netdev:
 	return ret;
 }

-static int axienet_of_remove(struct platform_device *pdev)
+static int axienet_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct axienet_local *lp = netdev_priv(ndev);
@@ -1656,9 +1656,9 @@ static int axienet_of_remove(struct platform_device *pdev)
 	return 0;
 }

-static struct platform_driver axienet_of_driver = {
-	.probe = axienet_of_probe,
-	.remove = axienet_of_remove,
+static struct platform_driver axienet_driver = {
+	.probe = axienet_probe,
+	.remove = axienet_remove,
 	.driver = {
 		 .owner = THIS_MODULE,
 		 .name = "xilinx_axienet",
@@ -1666,7 +1666,7 @@ static struct platform_driver axienet_of_driver = {
 	},
 };

-module_platform_driver(axienet_of_driver);
+module_platform_driver(axienet_driver);

 MODULE_DESCRIPTION("Xilinx Axi Ethernet driver");
 MODULE_AUTHOR("Xilinx");
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/22cffea8/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 14/14] net: axienet: Fix kernel-doc warnings
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-12 15:55   ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: netdev
  Cc: Srikanth Thokala, Michal Simek, Anirudha Sarangi, John Linn,
	linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 10101 bytes --]

This patch remove kernel-doc warnings.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      |  6 +++-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 38 ++++++++++++++---------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  6 ++--
 3 files changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 995a6e7..ac6aae9 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -412,6 +412,10 @@ struct axidma_bd {
  *		  supported, the maximum frame size would be 9k. Else it is
  *		  1522 bytes (assuming support for basic VLAN)
  * @rxmem:	Stores rx memory size for jumbo frame handling.
+ * @csum_offload_on_tx_path:	Stores the checksum selection on TX side.
+ * @csum_offload_on_rx_path:	Stores the checksum selection on RX side.
+ * @coalesce_count_rx:	Store the irq coalesce on RX side.
+ * @coalesce_count_tx:	Store the irq coalesce on TX side.
  */
 struct axienet_local {
 	struct net_device *ndev;
@@ -476,7 +480,7 @@ struct axienet_option {
  * @lp:         Pointer to axienet local structure
  * @offset:     Address offset from the base address of Axi Ethernet core
  *
- * returns: The contents of the Axi Ethernet register
+ * Return: The contents of the Axi Ethernet register
  *
  * This function returns the contents of the corresponding register.
  */
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6dd3eee..f88779e 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -117,7 +117,7 @@ static struct axienet_option axienet_options[] = {
  * @lp:		Pointer to axienet local structure
  * @reg:	Address offset from the base address of the Axi DMA core
  *
- * returns: The contents of the Axi DMA register
+ * Return: The contents of the Axi DMA register
  *
  * This function returns the contents of the corresponding Axi DMA register.
  */
@@ -179,8 +179,7 @@ static void axienet_dma_bd_release(struct net_device *ndev)
  * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA
  * @ndev:	Pointer to the net_device structure
  *
- * returns: 0, on success
- *	    -ENOMEM, on failure
+ * Return: 0, on success -ENOMEM, on failure
  *
  * This function is called to initialize the Rx and Tx DMA descriptor
  * rings. This initializes the descriptors with required default values
@@ -320,7 +319,7 @@ static void axienet_set_mac_address(struct net_device *ndev, void *address)
  * @ndev:	Pointer to the net_device structure
  * @p:		6 byte Address to be written as MAC address
  *
- * returns: 0 for all conditions. Presently, there is no failure case.
+ * Return: 0 for all conditions. Presently, there is no failure case.
  *
  * This function is called to initialize the MAC address of the Axi Ethernet
  * core. It calls the core specific axienet_set_mac_address. This is the
@@ -622,7 +621,7 @@ static void axienet_start_xmit_done(struct net_device *ndev)
  * @lp:		Pointer to the axienet_local structure
  * @num_frag:	The number of BDs to check for
  *
- * returns: 0, on success
+ * Return: 0, on success
  *	    NETDEV_TX_BUSY, if any of the descriptors are not free
  *
  * This function is invoked before BDs are allocated and transmission starts.
@@ -645,7 +644,7 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
  * @skb:	sk_buff pointer that contains data to be Txed.
  * @ndev:	Pointer to net_device structure.
  *
- * returns: NETDEV_TX_OK, on success
+ * Return: NETDEV_TX_OK, on success
  *	    NETDEV_TX_BUSY, if any of the descriptors are not free
  *
  * This function is invoked from upper layers to initiate transmission. The
@@ -800,7 +799,7 @@ static void axienet_recv(struct net_device *ndev)
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * returns: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED for all cases.
  *
  * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done"
  * to complete the BD processing.
@@ -849,7 +848,7 @@ out:
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * returns: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED for all cases.
  *
  * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD
  * processing.
@@ -899,7 +898,7 @@ static void axienet_dma_err_handler(unsigned long data);
  * axienet_open - Driver open routine.
  * @ndev:	Pointer to net_device structure
  *
- * returns: 0, on success.
+ * Return: 0, on success.
  *	    -ENODEV, if PHY cannot be connected to
  *	    non-zero error value on failure
  *
@@ -980,7 +979,7 @@ err_tx_irq:
  * axienet_stop - Driver stop routine.
  * @ndev:	Pointer to net_device structure
  *
- * returns: 0, on success.
+ * Return: 0, on success.
  *
  * This is the driver stop routine. It calls phy_disconnect to stop the PHY
  * device. It also removes the interrupt handlers and disables the interrupts.
@@ -1020,7 +1019,7 @@ static int axienet_stop(struct net_device *ndev)
  * @ndev:	Pointer to net_device structure
  * @new_mtu:	New mtu value to be applied
  *
- * returns: Always returns 0 (success).
+ * Return: Always returns 0 (success).
  *
  * This is the change mtu driver routine. It checks if the Axi Ethernet
  * hardware supports jumbo frames before changing the mtu. This can be
@@ -1087,6 +1086,8 @@ static const struct net_device_ops axienet_netdev_ops = {
  * not be found, the function returns -ENODEV. This function calls the
  * relevant PHY ethtool API to get the PHY settings.
  * Issue "ethtool ethX" under linux prompt to execute this function.
+ *
+ * Return: 0 on success, -ENODEV if PHY doesn't exist
  */
 static int axienet_ethtools_get_settings(struct net_device *ndev,
 					 struct ethtool_cmd *ecmd)
@@ -1108,6 +1109,8 @@ static int axienet_ethtools_get_settings(struct net_device *ndev,
  * relevant PHY ethtool API to set the PHY.
  * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
  * function.
+ *
+ * Return: 0 on success, -ENODEV if PHY doesn't exist
  */
 static int axienet_ethtools_set_settings(struct net_device *ndev,
 					 struct ethtool_cmd *ecmd)
@@ -1142,6 +1145,8 @@ static void axienet_ethtools_get_drvinfo(struct net_device *ndev,
  *
  * This implements ethtool command for getting the total register length
  * information.
+ *
+ * Return: the total regs length
  */
 static int axienet_ethtools_get_regs_len(struct net_device *ndev)
 {
@@ -1228,11 +1233,13 @@ axienet_ethtools_get_pauseparam(struct net_device *ndev,
  * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control)
  *				     settings.
  * @ndev:	Pointer to net_device structure
- * @epauseparam:Pointer to ethtool_pauseparam structure
+ * @epauseparm:Pointer to ethtool_pauseparam structure
  *
  * This implements ethtool command for enabling flow control on Rx and Tx
  * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this
  * function.
+ *
+ * Return: 0 on success, -EFAULT if device is running
  */
 static int
 axienet_ethtools_set_pauseparam(struct net_device *ndev,
@@ -1269,6 +1276,8 @@ axienet_ethtools_set_pauseparam(struct net_device *ndev,
  * This implements ethtool command for getting the DMA interrupt coalescing
  * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to
  * execute this function.
+ *
+ * Return: 0 always
  */
 static int axienet_ethtools_get_coalesce(struct net_device *ndev,
 					 struct ethtool_coalesce *ecoalesce)
@@ -1292,6 +1301,8 @@ static int axienet_ethtools_get_coalesce(struct net_device *ndev,
  * This implements ethtool command for setting the DMA interrupt coalescing
  * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux
  * prompt to execute this function.
+ *
+ * Return: 0, on success, Non-zero error value on failure.
  */
 static int axienet_ethtools_set_coalesce(struct net_device *ndev,
 					 struct ethtool_coalesce *ecoalesce)
@@ -1481,9 +1492,8 @@ static void axienet_dma_err_handler(unsigned long data)
 /**
  * axienet_probe - Axi Ethernet probe function.
  * @pdev:	Pointer to platform device structure.
- * @match:	Pointer to device id structure
  *
- * returns: 0, on success
+ * Return: 0, on success
  *	    Non-zero error value on failure.
  *
  * This is the probe routine for Axi Ethernet driver. This is called before
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index d6b72b0..46b6133 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -37,7 +37,7 @@ int axienet_mdio_wait_until_ready(struct axienet_local *lp)
  * @phy_id:	Address of the PHY device
  * @reg:	PHY register to read
  *
- * returns:	The register contents on success, -ETIMEDOUT on a timeout
+ * Return:	The register contents on success, -ETIMEDOUT on a timeout
  *
  * Reads the contents of the requested register from the requested PHY
  * address by first writing the details into MCR register. After a while
@@ -80,7 +80,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  * @reg:	PHY register to write to
  * @val:	Value to be written into the register
  *
- * returns:	0 on success, -ETIMEDOUT on a timeout
+ * Return:	0 on success, -ETIMEDOUT on a timeout
  *
  * Writes the value to the requested register by first writing the value
  * into MWD register. The the MCR register is then appropriately setup
@@ -119,7 +119,7 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
  * @lp:		Pointer to axienet local data structure.
  * @np:		Pointer to device node
  *
- * returns:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
+ * Return:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
  *		mdiobus_alloc (to allocate memory for mii bus structure) fails.
  *
  * Sets up the MDIO interface by initializing the MDIO clock and enabling the
--
1.8.2.3


[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* [PATCH 14/14] net: axienet: Fix kernel-doc warnings
@ 2014-02-12 15:55   ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-12 15:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch remove kernel-doc warnings.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 drivers/net/ethernet/xilinx/xilinx_axienet.h      |  6 +++-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 38 ++++++++++++++---------
 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c |  6 ++--
 3 files changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 995a6e7..ac6aae9 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -412,6 +412,10 @@ struct axidma_bd {
  *		  supported, the maximum frame size would be 9k. Else it is
  *		  1522 bytes (assuming support for basic VLAN)
  * @rxmem:	Stores rx memory size for jumbo frame handling.
+ * @csum_offload_on_tx_path:	Stores the checksum selection on TX side.
+ * @csum_offload_on_rx_path:	Stores the checksum selection on RX side.
+ * @coalesce_count_rx:	Store the irq coalesce on RX side.
+ * @coalesce_count_tx:	Store the irq coalesce on TX side.
  */
 struct axienet_local {
 	struct net_device *ndev;
@@ -476,7 +480,7 @@ struct axienet_option {
  * @lp:         Pointer to axienet local structure
  * @offset:     Address offset from the base address of Axi Ethernet core
  *
- * returns: The contents of the Axi Ethernet register
+ * Return: The contents of the Axi Ethernet register
  *
  * This function returns the contents of the corresponding register.
  */
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6dd3eee..f88779e 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -117,7 +117,7 @@ static struct axienet_option axienet_options[] = {
  * @lp:		Pointer to axienet local structure
  * @reg:	Address offset from the base address of the Axi DMA core
  *
- * returns: The contents of the Axi DMA register
+ * Return: The contents of the Axi DMA register
  *
  * This function returns the contents of the corresponding Axi DMA register.
  */
@@ -179,8 +179,7 @@ static void axienet_dma_bd_release(struct net_device *ndev)
  * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA
  * @ndev:	Pointer to the net_device structure
  *
- * returns: 0, on success
- *	    -ENOMEM, on failure
+ * Return: 0, on success -ENOMEM, on failure
  *
  * This function is called to initialize the Rx and Tx DMA descriptor
  * rings. This initializes the descriptors with required default values
@@ -320,7 +319,7 @@ static void axienet_set_mac_address(struct net_device *ndev, void *address)
  * @ndev:	Pointer to the net_device structure
  * @p:		6 byte Address to be written as MAC address
  *
- * returns: 0 for all conditions. Presently, there is no failure case.
+ * Return: 0 for all conditions. Presently, there is no failure case.
  *
  * This function is called to initialize the MAC address of the Axi Ethernet
  * core. It calls the core specific axienet_set_mac_address. This is the
@@ -622,7 +621,7 @@ static void axienet_start_xmit_done(struct net_device *ndev)
  * @lp:		Pointer to the axienet_local structure
  * @num_frag:	The number of BDs to check for
  *
- * returns: 0, on success
+ * Return: 0, on success
  *	    NETDEV_TX_BUSY, if any of the descriptors are not free
  *
  * This function is invoked before BDs are allocated and transmission starts.
@@ -645,7 +644,7 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
  * @skb:	sk_buff pointer that contains data to be Txed.
  * @ndev:	Pointer to net_device structure.
  *
- * returns: NETDEV_TX_OK, on success
+ * Return: NETDEV_TX_OK, on success
  *	    NETDEV_TX_BUSY, if any of the descriptors are not free
  *
  * This function is invoked from upper layers to initiate transmission. The
@@ -800,7 +799,7 @@ static void axienet_recv(struct net_device *ndev)
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * returns: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED for all cases.
  *
  * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done"
  * to complete the BD processing.
@@ -849,7 +848,7 @@ out:
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * returns: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED for all cases.
  *
  * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD
  * processing.
@@ -899,7 +898,7 @@ static void axienet_dma_err_handler(unsigned long data);
  * axienet_open - Driver open routine.
  * @ndev:	Pointer to net_device structure
  *
- * returns: 0, on success.
+ * Return: 0, on success.
  *	    -ENODEV, if PHY cannot be connected to
  *	    non-zero error value on failure
  *
@@ -980,7 +979,7 @@ err_tx_irq:
  * axienet_stop - Driver stop routine.
  * @ndev:	Pointer to net_device structure
  *
- * returns: 0, on success.
+ * Return: 0, on success.
  *
  * This is the driver stop routine. It calls phy_disconnect to stop the PHY
  * device. It also removes the interrupt handlers and disables the interrupts.
@@ -1020,7 +1019,7 @@ static int axienet_stop(struct net_device *ndev)
  * @ndev:	Pointer to net_device structure
  * @new_mtu:	New mtu value to be applied
  *
- * returns: Always returns 0 (success).
+ * Return: Always returns 0 (success).
  *
  * This is the change mtu driver routine. It checks if the Axi Ethernet
  * hardware supports jumbo frames before changing the mtu. This can be
@@ -1087,6 +1086,8 @@ static const struct net_device_ops axienet_netdev_ops = {
  * not be found, the function returns -ENODEV. This function calls the
  * relevant PHY ethtool API to get the PHY settings.
  * Issue "ethtool ethX" under linux prompt to execute this function.
+ *
+ * Return: 0 on success, -ENODEV if PHY doesn't exist
  */
 static int axienet_ethtools_get_settings(struct net_device *ndev,
 					 struct ethtool_cmd *ecmd)
@@ -1108,6 +1109,8 @@ static int axienet_ethtools_get_settings(struct net_device *ndev,
  * relevant PHY ethtool API to set the PHY.
  * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
  * function.
+ *
+ * Return: 0 on success, -ENODEV if PHY doesn't exist
  */
 static int axienet_ethtools_set_settings(struct net_device *ndev,
 					 struct ethtool_cmd *ecmd)
@@ -1142,6 +1145,8 @@ static void axienet_ethtools_get_drvinfo(struct net_device *ndev,
  *
  * This implements ethtool command for getting the total register length
  * information.
+ *
+ * Return: the total regs length
  */
 static int axienet_ethtools_get_regs_len(struct net_device *ndev)
 {
@@ -1228,11 +1233,13 @@ axienet_ethtools_get_pauseparam(struct net_device *ndev,
  * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control)
  *				     settings.
  * @ndev:	Pointer to net_device structure
- * @epauseparam:Pointer to ethtool_pauseparam structure
+ * @epauseparm:Pointer to ethtool_pauseparam structure
  *
  * This implements ethtool command for enabling flow control on Rx and Tx
  * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this
  * function.
+ *
+ * Return: 0 on success, -EFAULT if device is running
  */
 static int
 axienet_ethtools_set_pauseparam(struct net_device *ndev,
@@ -1269,6 +1276,8 @@ axienet_ethtools_set_pauseparam(struct net_device *ndev,
  * This implements ethtool command for getting the DMA interrupt coalescing
  * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to
  * execute this function.
+ *
+ * Return: 0 always
  */
 static int axienet_ethtools_get_coalesce(struct net_device *ndev,
 					 struct ethtool_coalesce *ecoalesce)
@@ -1292,6 +1301,8 @@ static int axienet_ethtools_get_coalesce(struct net_device *ndev,
  * This implements ethtool command for setting the DMA interrupt coalescing
  * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux
  * prompt to execute this function.
+ *
+ * Return: 0, on success, Non-zero error value on failure.
  */
 static int axienet_ethtools_set_coalesce(struct net_device *ndev,
 					 struct ethtool_coalesce *ecoalesce)
@@ -1481,9 +1492,8 @@ static void axienet_dma_err_handler(unsigned long data)
 /**
  * axienet_probe - Axi Ethernet probe function.
  * @pdev:	Pointer to platform device structure.
- * @match:	Pointer to device id structure
  *
- * returns: 0, on success
+ * Return: 0, on success
  *	    Non-zero error value on failure.
  *
  * This is the probe routine for Axi Ethernet driver. This is called before
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index d6b72b0..46b6133 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -37,7 +37,7 @@ int axienet_mdio_wait_until_ready(struct axienet_local *lp)
  * @phy_id:	Address of the PHY device
  * @reg:	PHY register to read
  *
- * returns:	The register contents on success, -ETIMEDOUT on a timeout
+ * Return:	The register contents on success, -ETIMEDOUT on a timeout
  *
  * Reads the contents of the requested register from the requested PHY
  * address by first writing the details into MCR register. After a while
@@ -80,7 +80,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  * @reg:	PHY register to write to
  * @val:	Value to be written into the register
  *
- * returns:	0 on success, -ETIMEDOUT on a timeout
+ * Return:	0 on success, -ETIMEDOUT on a timeout
  *
  * Writes the value to the requested register by first writing the value
  * into MWD register. The the MCR register is then appropriately setup
@@ -119,7 +119,7 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
  * @lp:		Pointer to axienet local data structure.
  * @np:		Pointer to device node
  *
- * returns:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
+ * Return:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
  *		mdiobus_alloc (to allocate memory for mii bus structure) fails.
  *
  * Sets up the MDIO interface by initializing the MDIO clock and enabling the
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/442e6e9d/attachment-0001.sig>

^ permalink raw reply related	[flat|nested] 47+ messages in thread
* RE: [PATCH 05/14] net: axienet: Service completion interrupts ASAP
  2014-02-12 15:55   ` Michal Simek
  (?)
@ 2014-02-12 16:38     ` David Laight
  -1 siblings, 0 replies; 47+ messages in thread
From: David Laight @ 2014-02-12 16:38 UTC (permalink / raw)
  To: 'Michal Simek', netdev
  Cc: Srikanth Thokala, Peter Crosthwaite, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

From: Michal Simek
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> The packet completion interrupts for TX and RX should be serviced before
> the packets are consumed. This ensures against the degenerate case when a
> new completion interrupt is raised after the handler has exited but before
> the interrupts are cleared. In this case its possible for the ISR to clear
> an unhandled interrupt (leading to potential deadlock).

I would clear the IRQ after processing the last packet, and then do a final
check for another packet.

That reduces the number of interrupts you take and then find there is
no work (because it was done on the previous interrupt).

There is a slight 'gotcha' in that the write to clear the IRQ can easily
get delayed enough the that cpu exits the ISR before the IRQ line
actually drops - leading the unwanted and unclaimed interrupts.
A posted write over PCIe could easily take long enough.

Maybe a hybrid scheme where the IRQ is cleared when the next entry
is still owned by the device would work.

	David




^ permalink raw reply	[flat|nested] 47+ messages in thread
* RE: [PATCH 05/14] net: axienet: Service completion interrupts ASAP
@ 2014-02-12 16:38     ` David Laight
  0 siblings, 0 replies; 47+ messages in thread
From: David Laight @ 2014-02-12 16:38 UTC (permalink / raw)
  To: 'Michal Simek', netdev
  Cc: Srikanth Thokala, Peter Crosthwaite, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

From: Michal Simek
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> The packet completion interrupts for TX and RX should be serviced before
> the packets are consumed. This ensures against the degenerate case when a
> new completion interrupt is raised after the handler has exited but before
> the interrupts are cleared. In this case its possible for the ISR to clear
> an unhandled interrupt (leading to potential deadlock).

I would clear the IRQ after processing the last packet, and then do a final
check for another packet.

That reduces the number of interrupts you take and then find there is
no work (because it was done on the previous interrupt).

There is a slight 'gotcha' in that the write to clear the IRQ can easily
get delayed enough the that cpu exits the ISR before the IRQ line
actually drops - leading the unwanted and unclaimed interrupts.
A posted write over PCIe could easily take long enough.

Maybe a hybrid scheme where the IRQ is cleared when the next entry
is still owned by the device would work.

	David

^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 05/14] net: axienet: Service completion interrupts ASAP
@ 2014-02-12 16:38     ` David Laight
  0 siblings, 0 replies; 47+ messages in thread
From: David Laight @ 2014-02-12 16:38 UTC (permalink / raw)
  To: linux-arm-kernel

From: Michal Simek
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> The packet completion interrupts for TX and RX should be serviced before
> the packets are consumed. This ensures against the degenerate case when a
> new completion interrupt is raised after the handler has exited but before
> the interrupts are cleared. In this case its possible for the ISR to clear
> an unhandled interrupt (leading to potential deadlock).

I would clear the IRQ after processing the last packet, and then do a final
check for another packet.

That reduces the number of interrupts you take and then find there is
no work (because it was done on the previous interrupt).

There is a slight 'gotcha' in that the write to clear the IRQ can easily
get delayed enough the that cpu exits the ISR before the IRQ line
actually drops - leading the unwanted and unclaimed interrupts.
A posted write over PCIe could easily take long enough.

Maybe a hybrid scheme where the IRQ is cleared when the next entry
is still owned by the device would work.

	David

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 0/14] Xilinx axi ethernet patches
  2014-02-12 15:55 ` Michal Simek
@ 2014-02-13  0:18   ` David Miller
  -1 siblings, 0 replies; 47+ messages in thread
From: David Miller @ 2014-02-13  0:18 UTC (permalink / raw)
  To: michal.simek
  Cc: netdev, sthokal, devicetree, monstr, John.Linn, anirudh,
	linux-kernel, grant.likely, robh+dt, linux-arm-kernel

From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 12 Feb 2014 16:55:34 +0100

> I have exctracted patches which I have in our
> xilinx git tree which are missing in the mainline.
> 
> The first two patches fix compilation error and
> warnings. Then 5 feature patches
> and the rest is OF cleanup and with kernel-doc
> and checkpatch problems.

You should not combine bug fix and feature patches.

Rather, you should submit bug fixes against the 'net' tree.  Then when
those bug fixes get applied and propagate to the 'net-next' tree you
can submit the feature patches and cleanups against the 'net-next'
tree.

^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 0/14] Xilinx axi ethernet patches
@ 2014-02-13  0:18   ` David Miller
  0 siblings, 0 replies; 47+ messages in thread
From: David Miller @ 2014-02-13  0:18 UTC (permalink / raw)
  To: linux-arm-kernel

From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 12 Feb 2014 16:55:34 +0100

> I have exctracted patches which I have in our
> xilinx git tree which are missing in the mainline.
> 
> The first two patches fix compilation error and
> warnings. Then 5 feature patches
> and the rest is OF cleanup and with kernel-doc
> and checkpatch problems.

You should not combine bug fix and feature patches.

Rather, you should submit bug fixes against the 'net' tree.  Then when
those bug fixes get applied and propagate to the 'net-next' tree you
can submit the feature patches and cleanups against the 'net-next'
tree.

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
  2014-02-12 15:55   ` Michal Simek
@ 2014-02-13  0:31     ` Joe Perches
  -1 siblings, 0 replies; 47+ messages in thread
From: Joe Perches @ 2014-02-13  0:31 UTC (permalink / raw)
  To: Michal Simek
  Cc: netdev, Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
> From: Srikanth Thokala <srikanth.thokala@xilinx.com>

trivia:

> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c

> +			netdev_err(lp->ndev,
> +				"axienet_device_reset DMA reset timeout!\n");

could you please align multi-line arguments to the
appropriate open parenthesis?

			netdev_err(lp->ndev,
				   "axienet_device_reset DMA reset timeout!\n");

or maybe:

			netdev_err(lp->ndev, "%s: "DMA reset timeout!\n",
				   __func__);

> @@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
>  	}
> 
>  	if (axienet_dma_bd_init(ndev)) {
> -		dev_err(&ndev->dev, "axienet_device_reset descriptor "
> -			"allocation failed\n");
> +		netdev_err(ndev,
> +			"axienet_device_reset descriptor allocation failed\n");

etc, et al.

> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
[]
> @@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
> 
>  	np1 = of_find_node_by_name(NULL, "cpu");
>  	if (!np1) {
> -		printk(KERN_WARNING "%s(): Could not find CPU device node.",
> -		       __func__);
> -		printk(KERN_WARNING "Setting MDIO clock divisor to "
> -		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
> +		netdev_warn(lp->ndev, "Could not find CPU device node.");

missing trailing "\n" to terminate message.

> +		netdev_warn(lp->ndev,
> +			 "Could not find clock ethernet controller property.");

here too. (and alignment)




^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
@ 2014-02-13  0:31     ` Joe Perches
  0 siblings, 0 replies; 47+ messages in thread
From: Joe Perches @ 2014-02-13  0:31 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
> From: Srikanth Thokala <srikanth.thokala@xilinx.com>

trivia:

> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c

> +			netdev_err(lp->ndev,
> +				"axienet_device_reset DMA reset timeout!\n");

could you please align multi-line arguments to the
appropriate open parenthesis?

			netdev_err(lp->ndev,
				   "axienet_device_reset DMA reset timeout!\n");

or maybe:

			netdev_err(lp->ndev, "%s: "DMA reset timeout!\n",
				   __func__);

> @@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
>  	}
> 
>  	if (axienet_dma_bd_init(ndev)) {
> -		dev_err(&ndev->dev, "axienet_device_reset descriptor "
> -			"allocation failed\n");
> +		netdev_err(ndev,
> +			"axienet_device_reset descriptor allocation failed\n");

etc, et al.

> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
[]
> @@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
> 
>  	np1 = of_find_node_by_name(NULL, "cpu");
>  	if (!np1) {
> -		printk(KERN_WARNING "%s(): Could not find CPU device node.",
> -		       __func__);
> -		printk(KERN_WARNING "Setting MDIO clock divisor to "
> -		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
> +		netdev_warn(lp->ndev, "Could not find CPU device node.");

missing trailing "\n" to terminate message.

> +		netdev_warn(lp->ndev,
> +			 "Could not find clock ethernet controller property.");

here too. (and alignment)

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 0/14] Xilinx axi ethernet patches
  2014-02-13  0:18   ` David Miller
  (?)
@ 2014-02-13  7:00     ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-13  7:00 UTC (permalink / raw)
  To: David Miller
  Cc: michal.simek, netdev, sthokal, devicetree, monstr, John.Linn,
	anirudh, linux-kernel, grant.likely, robh+dt, linux-arm-kernel

On 02/13/2014 01:18 AM, David Miller wrote:
> From: Michal Simek <michal.simek@xilinx.com>
> Date: Wed, 12 Feb 2014 16:55:34 +0100
> 
>> I have exctracted patches which I have in our
>> xilinx git tree which are missing in the mainline.
>>
>> The first two patches fix compilation error and
>> warnings. Then 5 feature patches
>> and the rest is OF cleanup and with kernel-doc
>> and checkpatch problems.
> 
> You should not combine bug fix and feature patches.
> 
> Rather, you should submit bug fixes against the 'net' tree.  Then when
> those bug fixes get applied and propagate to the 'net-next' tree you
> can submit the feature patches and cleanups against the 'net-next'
> tree.

Ok. I will.

Thanks,
Michal



^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 0/14] Xilinx axi ethernet patches
@ 2014-02-13  7:00     ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-13  7:00 UTC (permalink / raw)
  To: David Miller
  Cc: michal.simek, netdev, sthokal, devicetree, monstr, John.Linn,
	anirudh, linux-kernel, grant.likely, robh+dt, linux-arm-kernel

On 02/13/2014 01:18 AM, David Miller wrote:
> From: Michal Simek <michal.simek@xilinx.com>
> Date: Wed, 12 Feb 2014 16:55:34 +0100
> 
>> I have exctracted patches which I have in our
>> xilinx git tree which are missing in the mainline.
>>
>> The first two patches fix compilation error and
>> warnings. Then 5 feature patches
>> and the rest is OF cleanup and with kernel-doc
>> and checkpatch problems.
> 
> You should not combine bug fix and feature patches.
> 
> Rather, you should submit bug fixes against the 'net' tree.  Then when
> those bug fixes get applied and propagate to the 'net-next' tree you
> can submit the feature patches and cleanups against the 'net-next'
> tree.

Ok. I will.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 0/14] Xilinx axi ethernet patches
@ 2014-02-13  7:00     ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-13  7:00 UTC (permalink / raw)
  To: linux-arm-kernel

On 02/13/2014 01:18 AM, David Miller wrote:
> From: Michal Simek <michal.simek@xilinx.com>
> Date: Wed, 12 Feb 2014 16:55:34 +0100
> 
>> I have exctracted patches which I have in our
>> xilinx git tree which are missing in the mainline.
>>
>> The first two patches fix compilation error and
>> warnings. Then 5 feature patches
>> and the rest is OF cleanup and with kernel-doc
>> and checkpatch problems.
> 
> You should not combine bug fix and feature patches.
> 
> Rather, you should submit bug fixes against the 'net' tree.  Then when
> those bug fixes get applied and propagate to the 'net-next' tree you
> can submit the feature patches and cleanups against the 'net-next'
> tree.

Ok. I will.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
  2014-02-13  0:31     ` Joe Perches
@ 2014-02-13  7:19       ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-13  7:19 UTC (permalink / raw)
  To: Joe Perches
  Cc: Michal Simek, netdev, Srikanth Thokala, Srikanth Thokala,
	Michal Simek, Anirudha Sarangi, John Linn, linux-arm-kernel,
	linux-kernel

Hi Joe,

On 02/13/2014 01:31 AM, Joe Perches wrote:
> On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
>> From: Srikanth Thokala <srikanth.thokala@xilinx.com>
> 
> trivia:
> 
>> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> 
>> +			netdev_err(lp->ndev,
>> +				"axienet_device_reset DMA reset timeout!\n");
> 
> could you please align multi-line arguments to the
> appropriate open parenthesis?
> 
> 			netdev_err(lp->ndev,
> 				   "axienet_device_reset DMA reset timeout!\n");
> 
> or maybe:
> 
> 			netdev_err(lp->ndev, "%s: "DMA reset timeout!\n",
> 				   __func__);

ok.

> 
>> @@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
>>  	}
>>
>>  	if (axienet_dma_bd_init(ndev)) {
>> -		dev_err(&ndev->dev, "axienet_device_reset descriptor "
>> -			"allocation failed\n");
>> +		netdev_err(ndev,
>> +			"axienet_device_reset descriptor allocation failed\n");
> 
> etc, et al.


ok.

> 
>> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
> []
>> @@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
>>
>>  	np1 = of_find_node_by_name(NULL, "cpu");
>>  	if (!np1) {
>> -		printk(KERN_WARNING "%s(): Could not find CPU device node.",
>> -		       __func__);
>> -		printk(KERN_WARNING "Setting MDIO clock divisor to "
>> -		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
>> +		netdev_warn(lp->ndev, "Could not find CPU device node.");
> 
> missing trailing "\n" to terminate message.

ok.

> 
>> +		netdev_warn(lp->ndev,
>> +			 "Could not find clock ethernet controller property.");
> 
> here too. (and alignment)

This is problematic. I would like to keep 80 char limits and keeping
this align just break it. That's why I was using tab alignment.
Probably the solution is just to shorten message.

Thanks for your comments,
Michal



^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
@ 2014-02-13  7:19       ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-13  7:19 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Joe,

On 02/13/2014 01:31 AM, Joe Perches wrote:
> On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
>> From: Srikanth Thokala <srikanth.thokala@xilinx.com>
> 
> trivia:
> 
>> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> 
>> +			netdev_err(lp->ndev,
>> +				"axienet_device_reset DMA reset timeout!\n");
> 
> could you please align multi-line arguments to the
> appropriate open parenthesis?
> 
> 			netdev_err(lp->ndev,
> 				   "axienet_device_reset DMA reset timeout!\n");
> 
> or maybe:
> 
> 			netdev_err(lp->ndev, "%s: "DMA reset timeout!\n",
> 				   __func__);

ok.

> 
>> @@ -484,8 +484,8 @@ static void axienet_device_reset(struct net_device *ndev)
>>  	}
>>
>>  	if (axienet_dma_bd_init(ndev)) {
>> -		dev_err(&ndev->dev, "axienet_device_reset descriptor "
>> -			"allocation failed\n");
>> +		netdev_err(ndev,
>> +			"axienet_device_reset descriptor allocation failed\n");
> 
> etc, et al.


ok.

> 
>> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
> []
>> @@ -161,19 +161,19 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
>>
>>  	np1 = of_find_node_by_name(NULL, "cpu");
>>  	if (!np1) {
>> -		printk(KERN_WARNING "%s(): Could not find CPU device node.",
>> -		       __func__);
>> -		printk(KERN_WARNING "Setting MDIO clock divisor to "
>> -		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
>> +		netdev_warn(lp->ndev, "Could not find CPU device node.");
> 
> missing trailing "\n" to terminate message.

ok.

> 
>> +		netdev_warn(lp->ndev,
>> +			 "Could not find clock ethernet controller property.");
> 
> here too. (and alignment)

This is problematic. I would like to keep 80 char limits and keeping
this align just break it. That's why I was using tab alignment.
Probably the solution is just to shorten message.

Thanks for your comments,
Michal

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
  2014-02-13  7:19       ` Michal Simek
@ 2014-02-13 15:51         ` Joe Perches
  -1 siblings, 0 replies; 47+ messages in thread
From: Joe Perches @ 2014-02-13 15:51 UTC (permalink / raw)
  To: Michal Simek
  Cc: netdev, Srikanth Thokala, Srikanth Thokala, Michal Simek,
	Anirudha Sarangi, John Linn, linux-arm-kernel, linux-kernel

On Thu, 2014-02-13 at 08:19 +0100, Michal Simek wrote:
> On 02/13/2014 01:31 AM, Joe Perches wrote:
> > On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:

Hi again Michal.

> >> +		netdev_warn(lp->ndev,
> >> +			 "Could not find clock ethernet controller property.");
> > 
> > here too. (and alignment)
> 
> This is problematic. I would like to keep 80 char limits and keeping
> this align just break it. That's why I was using tab alignment.
> Probably the solution is just to shorten message.

(overly long, tiresomely trivial stuff below)

Your choice.  I'm not an 80 column zealot but
please don't shorten the message just to fit
80 columns if it impacts intelligibility.

Generally, I'd write this something like:

		netdev_warn(lp->ndev,
			    "Could not find clock ethernet controller property\n");

(without the period) which is 83 columns.

checkpatch makes exceptions for 80 column line
length maximums for format strings.

I've no real issue if you indent it back one.

fyi: this is 77 columns

		netdev_warn(lp->ndev,
			    "No clock ethernet controller property found\n");

About the message itself.

You dropped the "axienet_mdio_setup" function name.

I believe the dmesg output will look something like:

xilinx_temac 0000:01:00.0 (unregistered net_device): Could not find clock ethernet controller property.
xilinx_temac 0000:01:00.0 (unregistered net_device): Setting MDIO clock divisor to default 29

Because these 2 messages are effectively linked,
my preference would be to emit them on a single line,

Something like:

xilinx_temac 0000:01:00.0 (unregistered net_device): of_get_property("clock-frequency") not found - setting MDIO clock divisor to default 29

or

		netdev_warn(lp->ndev,
			    "of_get_property(\"clock-frequency\") not found - setting MDIO clock divisor to default %u\n",
			    DEFAULT_CLOCK_DIVISOR);



^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
@ 2014-02-13 15:51         ` Joe Perches
  0 siblings, 0 replies; 47+ messages in thread
From: Joe Perches @ 2014-02-13 15:51 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, 2014-02-13 at 08:19 +0100, Michal Simek wrote:
> On 02/13/2014 01:31 AM, Joe Perches wrote:
> > On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:

Hi again Michal.

> >> +		netdev_warn(lp->ndev,
> >> +			 "Could not find clock ethernet controller property.");
> > 
> > here too. (and alignment)
> 
> This is problematic. I would like to keep 80 char limits and keeping
> this align just break it. That's why I was using tab alignment.
> Probably the solution is just to shorten message.

(overly long, tiresomely trivial stuff below)

Your choice.  I'm not an 80 column zealot but
please don't shorten the message just to fit
80 columns if it impacts intelligibility.

Generally, I'd write this something like:

		netdev_warn(lp->ndev,
			    "Could not find clock ethernet controller property\n");

(without the period) which is 83 columns.

checkpatch makes exceptions for 80 column line
length maximums for format strings.

I've no real issue if you indent it back one.

fyi: this is 77 columns

		netdev_warn(lp->ndev,
			    "No clock ethernet controller property found\n");

About the message itself.

You dropped the "axienet_mdio_setup" function name.

I believe the dmesg output will look something like:

xilinx_temac 0000:01:00.0 (unregistered net_device): Could not find clock ethernet controller property.
xilinx_temac 0000:01:00.0 (unregistered net_device): Setting MDIO clock divisor to default 29

Because these 2 messages are effectively linked,
my preference would be to emit them on a single line,

Something like:

xilinx_temac 0000:01:00.0 (unregistered net_device): of_get_property("clock-frequency") not found - setting MDIO clock divisor to default 29

or

		netdev_warn(lp->ndev,
			    "of_get_property(\"clock-frequency\") not found - setting MDIO clock divisor to default %u\n",
			    DEFAULT_CLOCK_DIVISOR);

^ permalink raw reply	[flat|nested] 47+ messages in thread
* Re: [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
  2014-02-13 15:51         ` Joe Perches
@ 2014-02-14  9:21           ` Michal Simek
  -1 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-14  9:21 UTC (permalink / raw)
  To: Joe Perches
  Cc: Michal Simek, netdev, Srikanth Thokala, Srikanth Thokala,
	Michal Simek, Anirudha Sarangi, John Linn, linux-arm-kernel,
	linux-kernel

On 02/13/2014 04:51 PM, Joe Perches wrote:
> On Thu, 2014-02-13 at 08:19 +0100, Michal Simek wrote:
>> On 02/13/2014 01:31 AM, Joe Perches wrote:
>>> On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
> 
> Hi again Michal.
> 
>>>> +		netdev_warn(lp->ndev,
>>>> +			 "Could not find clock ethernet controller property.");
>>>
>>> here too. (and alignment)
>>
>> This is problematic. I would like to keep 80 char limits and keeping
>> this align just break it. That's why I was using tab alignment.
>> Probably the solution is just to shorten message.
> 
> (overly long, tiresomely trivial stuff below)
> 
> Your choice.  I'm not an 80 column zealot but
> please don't shorten the message just to fit
> 80 columns if it impacts intelligibility.

I am trying to keep 80 chars and follow subsystem
standards.

> Generally, I'd write this something like:
> 
> 		netdev_warn(lp->ndev,
> 			    "Could not find clock ethernet controller property\n");
> 
> (without the period) which is 83 columns.

ok.

> checkpatch makes exceptions for 80 column line
> length maximums for format strings.

yes but testing systems reports it because that 80 chars
is still default value.


> 
> I've no real issue if you indent it back one.
> 
> fyi: this is 77 columns
> 
> 		netdev_warn(lp->ndev,
> 			    "No clock ethernet controller property found\n");
> 
> About the message itself.
> 
> You dropped the "axienet_mdio_setup" function name.
> 
> I believe the dmesg output will look something like:
> 
> xilinx_temac 0000:01:00.0 (unregistered net_device): Could not find clock ethernet controller property.
> xilinx_temac 0000:01:00.0 (unregistered net_device): Setting MDIO clock divisor to default 29
> 
> Because these 2 messages are effectively linked,
> my preference would be to emit them on a single line,
> 
> Something like:
> 
> xilinx_temac 0000:01:00.0 (unregistered net_device): of_get_property("clock-frequency") not found - setting MDIO clock divisor to default 29
> 
> or
> 
> 		netdev_warn(lp->ndev,
> 			    "of_get_property(\"clock-frequency\") not found - setting MDIO clock divisor to default %u\n",
> 			    DEFAULT_CLOCK_DIVISOR);
> 

But then you are breaking 80 char limits a lot.

Thanks,
Michal



^ permalink raw reply	[flat|nested] 47+ messages in thread
* [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings
@ 2014-02-14  9:21           ` Michal Simek
  0 siblings, 0 replies; 47+ messages in thread
From: Michal Simek @ 2014-02-14  9:21 UTC (permalink / raw)
  To: linux-arm-kernel

On 02/13/2014 04:51 PM, Joe Perches wrote:
> On Thu, 2014-02-13 at 08:19 +0100, Michal Simek wrote:
>> On 02/13/2014 01:31 AM, Joe Perches wrote:
>>> On Wed, 2014-02-12 at 16:55 +0100, Michal Simek wrote:
> 
> Hi again Michal.
> 
>>>> +		netdev_warn(lp->ndev,
>>>> +			 "Could not find clock ethernet controller property.");
>>>
>>> here too. (and alignment)
>>
>> This is problematic. I would like to keep 80 char limits and keeping
>> this align just break it. That's why I was using tab alignment.
>> Probably the solution is just to shorten message.
> 
> (overly long, tiresomely trivial stuff below)
> 
> Your choice.  I'm not an 80 column zealot but
> please don't shorten the message just to fit
> 80 columns if it impacts intelligibility.

I am trying to keep 80 chars and follow subsystem
standards.

> Generally, I'd write this something like:
> 
> 		netdev_warn(lp->ndev,
> 			    "Could not find clock ethernet controller property\n");
> 
> (without the period) which is 83 columns.

ok.

> checkpatch makes exceptions for 80 column line
> length maximums for format strings.

yes but testing systems reports it because that 80 chars
is still default value.


> 
> I've no real issue if you indent it back one.
> 
> fyi: this is 77 columns
> 
> 		netdev_warn(lp->ndev,
> 			    "No clock ethernet controller property found\n");
> 
> About the message itself.
> 
> You dropped the "axienet_mdio_setup" function name.
> 
> I believe the dmesg output will look something like:
> 
> xilinx_temac 0000:01:00.0 (unregistered net_device): Could not find clock ethernet controller property.
> xilinx_temac 0000:01:00.0 (unregistered net_device): Setting MDIO clock divisor to default 29
> 
> Because these 2 messages are effectively linked,
> my preference would be to emit them on a single line,
> 
> Something like:
> 
> xilinx_temac 0000:01:00.0 (unregistered net_device): of_get_property("clock-frequency") not found - setting MDIO clock divisor to default 29
> 
> or
> 
> 		netdev_warn(lp->ndev,
> 			    "of_get_property(\"clock-frequency\") not found - setting MDIO clock divisor to default %u\n",
> 			    DEFAULT_CLOCK_DIVISOR);
> 

But then you are breaking 80 char limits a lot.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 47+ messages in thread
end of thread, other threads:[~2014-02-14  9:22 UTC | newest]

Thread overview: 47+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-12 15:55 [PATCH 0/14] Xilinx axi ethernet patches Michal Simek
2014-02-12 15:55 ` Michal Simek
2014-02-12 15:55 ` [PATCH 01/14] net: axienet: Fix compilation error Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 02/14] net: axienet: Fix compilation warnings Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 03/14] net: axienet: Support for RGMII Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 04/14] net: axienet: Handle 0 packet receive gracefully Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 05/14] net: axienet: Service completion interrupts ASAP Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 16:38   ` David Laight
2014-02-12 16:38     ` David Laight
2014-02-12 16:38     ` David Laight
2014-02-12 15:55 ` [PATCH 06/14] net: axienet: Handle jumbo frames for lesser frame sizes Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 07/14] net: axienet: Support phy-less mode of operation Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-13  0:31   ` Joe Perches
2014-02-13  0:31     ` Joe Perches
2014-02-13  7:19     ` Michal Simek
2014-02-13  7:19       ` Michal Simek
2014-02-13 15:51       ` Joe Perches
2014-02-13 15:51         ` Joe Perches
2014-02-14  9:21         ` Michal Simek
2014-02-14  9:21           ` Michal Simek
2014-02-12 15:55 ` [PATCH 09/14] net: axienet: Fix comments blocks Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 10/14] net: axienet: Use pdev instead of op Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 11/14] net: axienet: Use devm_* calls Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 12/14] net: axienet: Use of_property_* calls Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 13/14] net: axienet: Removed _of_ prefix in probe and remove functions Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-12 15:55 ` [PATCH 14/14] net: axienet: Fix kernel-doc warnings Michal Simek
2014-02-12 15:55   ` Michal Simek
2014-02-13  0:18 ` [PATCH 0/14] Xilinx axi ethernet patches David Miller
2014-02-13  0:18   ` David Miller
2014-02-13  7:00   ` Michal Simek
2014-02-13  7:00     ` Michal Simek
2014-02-13  7:00     ` Michal Simek

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.