All of lore.kernel.org
 help / color / mirror / Atom feed
* [Nouveau] Fans ramping up randomly when idle
@ 2022-11-05 19:31 Timothy Madden
  2022-11-07 11:41 ` Karol Herbst
  2022-11-09 23:44 ` Karol Herbst
  0 siblings, 2 replies; 9+ messages in thread
From: Timothy Madden @ 2022-11-05 19:31 UTC (permalink / raw)
  To: nouveau

Hello

My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to recover
(I have to reboot) even when the card is idle or is only showing the desktop.

This issue happens even when the card is not connected to a monitor.

My dmesg output from nouveau is included below, I think the last 2 lines are
the relevant ones:
[ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
[ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff




timothy@localhost:~> dmesg | grep -i -e nouveau -e nvidia
[    6.511064] nouveau 0000:0b:00.0: NVIDIA TU102 (162000a1)
[    6.594464] nouveau 0000:0b:00.0: bios: version 90.02.42.00.14
[    6.597756] nouveau 0000:0b:00.0: pmu: firmware unavailable
[    6.601947] nouveau 0000:0b:00.0: fb: 11264 MiB GDDR6
[    6.618463] nouveau 0000:0b:00.0: DRM: VRAM: 11264 MiB
[    6.618465] nouveau 0000:0b:00.0: DRM: GART: 536870912 MiB
[    6.618466] nouveau 0000:0b:00.0: DRM: BIT table 'A' not found
[    6.618468] nouveau 0000:0b:00.0: DRM: BIT table 'L' not found
[    6.618469] nouveau 0000:0b:00.0: DRM: TMDS table version 2.0
[    6.618470] nouveau 0000:0b:00.0: DRM: DCB version 4.1
[    6.618471] nouveau 0000:0b:00.0: DRM: DCB outp 00: 02800f66 04600020
[    6.618473] nouveau 0000:0b:00.0: DRM: DCB outp 01: 02000f62 00020020
[    6.618474] nouveau 0000:0b:00.0: DRM: DCB outp 03: 02011f52 00020010
[    6.618475] nouveau 0000:0b:00.0: DRM: DCB outp 04: 04822f76 04600010
[    6.618476] nouveau 0000:0b:00.0: DRM: DCB outp 05: 04022f72 00020010
[    6.618477] nouveau 0000:0b:00.0: DRM: DCB outp 08: 01844f36 04600010
[    6.618478] nouveau 0000:0b:00.0: DRM: DCB outp 09: 01044f32 00020010
[    6.618479] nouveau 0000:0b:00.0: DRM: DCB outp 10: 04833f86 04600020
[    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 00: 00020046
[    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 01: 00010161
[    6.618482] nouveau 0000:0b:00.0: DRM: DCB conn 02: 01000246
[    6.618483] nouveau 0000:0b:00.0: DRM: DCB conn 03: 02000371
[    6.618484] nouveau 0000:0b:00.0: DRM: DCB conn 04: 00001446
[    6.620448] nouveau 0000:0b:00.0: DRM: MM: using COPY for buffer copies
[    7.062338] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
[    7.065331] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0b:00.0 on minor 1
[    7.254317] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
[    7.446318] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
[    8.501252] nvidia-gpu 0000:0b:00.3: enabling device (0000 -> 0002)
[    8.696138] audit: type=1400 audit(1667665884.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=926 comm="apparmor_parser"
[    8.696141] audit: type=1400 audit(1667665884.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=926 comm="apparmor_parser"
[    8.704333] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[    8.708797] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input15
[    8.708903] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input16
[    8.708936] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input17
[    8.708965] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input18
[    8.708994] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input19
[    8.709032] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input20
[    8.709065] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input21
[   10.776280] nouveau 0000:0b:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 3275.720190] nouveau 0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
[ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
timothy@localhost:~> 


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-05 19:31 [Nouveau] Fans ramping up randomly when idle Timothy Madden
@ 2022-11-07 11:41 ` Karol Herbst
  2022-11-09 22:50   ` Ajay Gupta
  2022-11-10 15:01   ` Timothy Madden
  2022-11-09 23:44 ` Karol Herbst
  1 sibling, 2 replies; 9+ messages in thread
From: Karol Herbst @ 2022-11-07 11:41 UTC (permalink / raw)
  To: Timothy Madden; +Cc: nouveau, Ajay Gupta

On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com> wrote:
>
> Hello
>
> My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to recover
> (I have to reboot) even when the card is idle or is only showing the desktop.
>
> This issue happens even when the card is not connected to a monitor.
>
> My dmesg output from nouveau is included below, I think the last 2 lines are
> the relevant ones:
> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
>
>

that's kind of odd, because "nvidia-gpu" implies you might have
multiple drivers here? Though .3 should be some USB/UCSI or something
related sub device on the GPU and Nvidia might have messed it up
(adding the maintainer of the i2c-nvidia-gpu driver on CC).

Anyway, the fans are probably controlled by the Laptops firmware and
maybe something goes wrong with the runtime power management feature
here, which as far as I can tell works on the Nouveau side, but
i2c-nvidia-gpu might prevent the GPU from powering done and so causing
more heat. It's also interesting that the GPU runs that hot, but given
we don't support changing power states yet in Nouveau (still WIP
wiring up the new released firmware from nvidia), not much we can do
while the GPU is actually in use at this point.

>
>
> timothy@localhost:~> dmesg | grep -i -e nouveau -e nvidia
> [    6.511064] nouveau 0000:0b:00.0: NVIDIA TU102 (162000a1)
> [    6.594464] nouveau 0000:0b:00.0: bios: version 90.02.42.00.14
> [    6.597756] nouveau 0000:0b:00.0: pmu: firmware unavailable
> [    6.601947] nouveau 0000:0b:00.0: fb: 11264 MiB GDDR6
> [    6.618463] nouveau 0000:0b:00.0: DRM: VRAM: 11264 MiB
> [    6.618465] nouveau 0000:0b:00.0: DRM: GART: 536870912 MiB
> [    6.618466] nouveau 0000:0b:00.0: DRM: BIT table 'A' not found
> [    6.618468] nouveau 0000:0b:00.0: DRM: BIT table 'L' not found
> [    6.618469] nouveau 0000:0b:00.0: DRM: TMDS table version 2.0
> [    6.618470] nouveau 0000:0b:00.0: DRM: DCB version 4.1
> [    6.618471] nouveau 0000:0b:00.0: DRM: DCB outp 00: 02800f66 04600020
> [    6.618473] nouveau 0000:0b:00.0: DRM: DCB outp 01: 02000f62 00020020
> [    6.618474] nouveau 0000:0b:00.0: DRM: DCB outp 03: 02011f52 00020010
> [    6.618475] nouveau 0000:0b:00.0: DRM: DCB outp 04: 04822f76 04600010
> [    6.618476] nouveau 0000:0b:00.0: DRM: DCB outp 05: 04022f72 00020010
> [    6.618477] nouveau 0000:0b:00.0: DRM: DCB outp 08: 01844f36 04600010
> [    6.618478] nouveau 0000:0b:00.0: DRM: DCB outp 09: 01044f32 00020010
> [    6.618479] nouveau 0000:0b:00.0: DRM: DCB outp 10: 04833f86 04600020
> [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 00: 00020046
> [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 01: 00010161
> [    6.618482] nouveau 0000:0b:00.0: DRM: DCB conn 02: 01000246
> [    6.618483] nouveau 0000:0b:00.0: DRM: DCB conn 03: 02000371
> [    6.618484] nouveau 0000:0b:00.0: DRM: DCB conn 04: 00001446
> [    6.620448] nouveau 0000:0b:00.0: DRM: MM: using COPY for buffer copies
> [    7.062338] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    7.065331] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0b:00.0 on minor 1
> [    7.254317] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    7.446318] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    8.501252] nvidia-gpu 0000:0b:00.3: enabling device (0000 -> 0002)
> [    8.696138] audit: type=1400 audit(1667665884.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=926 comm="apparmor_parser"
> [    8.696141] audit: type=1400 audit(1667665884.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=926 comm="apparmor_parser"
> [    8.704333] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops nv50_audio_component_bind_ops [nouveau])
> [    8.708797] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input15
> [    8.708903] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input16
> [    8.708936] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input17
> [    8.708965] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input18
> [    8.708994] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input19
> [    8.709032] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input20
> [    8.709065] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input21
> [   10.776280] nouveau 0000:0b:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
> [ 3275.720190] nouveau 0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
> timothy@localhost:~>
>


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-07 11:41 ` Karol Herbst
@ 2022-11-09 22:50   ` Ajay Gupta
  2022-11-10 15:22     ` Timothy Madden
  2022-11-10 15:40     ` Timothy Madden
  2022-11-10 15:01   ` Timothy Madden
  1 sibling, 2 replies; 9+ messages in thread
From: Ajay Gupta @ 2022-11-09 22:50 UTC (permalink / raw)
  To: Karol Herbst, Timothy Madden; +Cc: nouveau

Hi
> -----Original Message-----
> From: Karol Herbst <kherbst@redhat.com>
> Sent: Monday, November 7, 2022 3:42 AM
> To: Timothy Madden <terminatorul@gmail.com>
> Cc: nouveau@lists.freedesktop.org; Ajay Gupta <ajayg@nvidia.com>
> Subject: Re: [Nouveau] Fans ramping up randomly when idle
> 
> External email: Use caution opening links or attachments
> 
> 
> On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com>
> wrote:
> >
> > Hello
> >
> > My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to
> > recover (I have to reboot) even when the card is idle or is only showing the
> desktop.
> >
> > This issue happens even when the card is not connected to a monitor.
> >
> > My dmesg output from nouveau is included below, I think the last 2
> > lines are the relevant ones:
> > [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state
> > from D3hot to D0, device inaccessible [ 9427.889387] nvidia-gpu
> > 0000:0b:00.3: i2c timeout error ffffffff
This only implies that there is no usb/ucsi device on the card, it is expected from
such cards and should be seen in dmesg even when heating issue is not there.

Thanks
>nvpublic
> >
> >
> 
> that's kind of odd, because "nvidia-gpu" implies you might have multiple
> drivers here? Though .3 should be some USB/UCSI or something related sub
> device on the GPU and Nvidia might have messed it up (adding the
> maintainer of the i2c-nvidia-gpu driver on CC).
> 
> Anyway, the fans are probably controlled by the Laptops firmware and
> maybe something goes wrong with the runtime power management feature
> here, which as far as I can tell works on the Nouveau side, but i2c-nvidia-gpu
> might prevent the GPU from powering done and so causing more heat. It's
> also interesting that the GPU runs that hot, but given we don't support
> changing power states yet in Nouveau (still WIP wiring up the new released
> firmware from nvidia), not much we can do while the GPU is actually in use at
> this point.
> 
> >
> >
> > timothy@localhost:~> dmesg | grep -i -e nouveau -e nvidia
> > [    6.511064] nouveau 0000:0b:00.0: NVIDIA TU102 (162000a1)
> > [    6.594464] nouveau 0000:0b:00.0: bios: version 90.02.42.00.14
> > [    6.597756] nouveau 0000:0b:00.0: pmu: firmware unavailable
> > [    6.601947] nouveau 0000:0b:00.0: fb: 11264 MiB GDDR6
> > [    6.618463] nouveau 0000:0b:00.0: DRM: VRAM: 11264 MiB
> > [    6.618465] nouveau 0000:0b:00.0: DRM: GART: 536870912 MiB
> > [    6.618466] nouveau 0000:0b:00.0: DRM: BIT table 'A' not found
> > [    6.618468] nouveau 0000:0b:00.0: DRM: BIT table 'L' not found
> > [    6.618469] nouveau 0000:0b:00.0: DRM: TMDS table version 2.0
> > [    6.618470] nouveau 0000:0b:00.0: DRM: DCB version 4.1
> > [    6.618471] nouveau 0000:0b:00.0: DRM: DCB outp 00: 02800f66 04600020
> > [    6.618473] nouveau 0000:0b:00.0: DRM: DCB outp 01: 02000f62 00020020
> > [    6.618474] nouveau 0000:0b:00.0: DRM: DCB outp 03: 02011f52 00020010
> > [    6.618475] nouveau 0000:0b:00.0: DRM: DCB outp 04: 04822f76 04600010
> > [    6.618476] nouveau 0000:0b:00.0: DRM: DCB outp 05: 04022f72 00020010
> > [    6.618477] nouveau 0000:0b:00.0: DRM: DCB outp 08: 01844f36 04600010
> > [    6.618478] nouveau 0000:0b:00.0: DRM: DCB outp 09: 01044f32 00020010
> > [    6.618479] nouveau 0000:0b:00.0: DRM: DCB outp 10: 04833f86 04600020
> > [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 00: 00020046
> > [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 01: 00010161
> > [    6.618482] nouveau 0000:0b:00.0: DRM: DCB conn 02: 01000246
> > [    6.618483] nouveau 0000:0b:00.0: DRM: DCB conn 03: 02000371
> > [    6.618484] nouveau 0000:0b:00.0: DRM: DCB conn 04: 00001446
> > [    6.620448] nouveau 0000:0b:00.0: DRM: MM: using COPY for buffer
> copies
> > [    7.062338] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> > [    7.065331] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0b:00.0 on
> minor 1
> > [    7.254317] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> > [    7.446318] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> > [    8.501252] nvidia-gpu 0000:0b:00.3: enabling device (0000 -> 0002)
> > [    8.696138] audit: type=1400 audit(1667665884.700:5):
> apparmor="STATUS" operation="profile_load" profile="unconfined"
> name="nvidia_modprobe" pid=926 comm="apparmor_parser"
> > [    8.696141] audit: type=1400 audit(1667665884.700:6):
> apparmor="STATUS" operation="profile_load" profile="unconfined"
> name="nvidia_modprobe//kmod" pid=926 comm="apparmor_parser"
> > [    8.704333] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops
> nv50_audio_component_bind_ops [nouveau])
> > [    8.708797] input: HDA NVidia HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input15
> > [    8.708903] input: HDA NVidia HDMI/DP,pcm=7 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input16
> > [    8.708936] input: HDA NVidia HDMI/DP,pcm=8 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input17
> > [    8.708965] input: HDA NVidia HDMI/DP,pcm=9 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input18
> > [    8.708994] input: HDA NVidia HDMI/DP,pcm=10 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input19
> > [    8.709032] input: HDA NVidia HDMI/DP,pcm=11 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input20
> > [    8.709065] input: HDA NVidia HDMI/DP,pcm=12 as
> /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input21
> > [   10.776280] nouveau 0000:0b:00.0: vgaarb: changed VGA decodes:
> olddecodes=io+mem,decodes=none:owns=none
> > [ 3275.720190] nouveau 0000:0b:00.0: therm: temperature (90 C) hit the
> > 'fanboost' threshold [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to
> > change power state from D3hot to D0, device inaccessible [
> > 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
> > timothy@localhost:~>
> >


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-05 19:31 [Nouveau] Fans ramping up randomly when idle Timothy Madden
  2022-11-07 11:41 ` Karol Herbst
@ 2022-11-09 23:44 ` Karol Herbst
  2022-11-10 14:51   ` Timothy Madden
  1 sibling, 1 reply; 9+ messages in thread
From: Karol Herbst @ 2022-11-09 23:44 UTC (permalink / raw)
  To: Timothy Madden; +Cc: nouveau

On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com> wrote:
>
> Hello
>
> My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to recover
> (I have to reboot) even when the card is idle or is only showing the desktop.
>
> This issue happens even when the card is not connected to a monitor.
>
> My dmesg output from nouveau is included below, I think the last 2 lines are
> the relevant ones:
> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
>
>
>
>
> timothy@localhost:~> dmesg | grep -i -e nouveau -e nvidia
> [    6.511064] nouveau 0000:0b:00.0: NVIDIA TU102 (162000a1)
> [    6.594464] nouveau 0000:0b:00.0: bios: version 90.02.42.00.14
> [    6.597756] nouveau 0000:0b:00.0: pmu: firmware unavailable
> [    6.601947] nouveau 0000:0b:00.0: fb: 11264 MiB GDDR6
> [    6.618463] nouveau 0000:0b:00.0: DRM: VRAM: 11264 MiB
> [    6.618465] nouveau 0000:0b:00.0: DRM: GART: 536870912 MiB
> [    6.618466] nouveau 0000:0b:00.0: DRM: BIT table 'A' not found
> [    6.618468] nouveau 0000:0b:00.0: DRM: BIT table 'L' not found
> [    6.618469] nouveau 0000:0b:00.0: DRM: TMDS table version 2.0
> [    6.618470] nouveau 0000:0b:00.0: DRM: DCB version 4.1
> [    6.618471] nouveau 0000:0b:00.0: DRM: DCB outp 00: 02800f66 04600020
> [    6.618473] nouveau 0000:0b:00.0: DRM: DCB outp 01: 02000f62 00020020
> [    6.618474] nouveau 0000:0b:00.0: DRM: DCB outp 03: 02011f52 00020010
> [    6.618475] nouveau 0000:0b:00.0: DRM: DCB outp 04: 04822f76 04600010
> [    6.618476] nouveau 0000:0b:00.0: DRM: DCB outp 05: 04022f72 00020010
> [    6.618477] nouveau 0000:0b:00.0: DRM: DCB outp 08: 01844f36 04600010
> [    6.618478] nouveau 0000:0b:00.0: DRM: DCB outp 09: 01044f32 00020010
> [    6.618479] nouveau 0000:0b:00.0: DRM: DCB outp 10: 04833f86 04600020
> [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 00: 00020046
> [    6.618481] nouveau 0000:0b:00.0: DRM: DCB conn 01: 00010161
> [    6.618482] nouveau 0000:0b:00.0: DRM: DCB conn 02: 01000246
> [    6.618483] nouveau 0000:0b:00.0: DRM: DCB conn 03: 02000371
> [    6.618484] nouveau 0000:0b:00.0: DRM: DCB conn 04: 00001446
> [    6.620448] nouveau 0000:0b:00.0: DRM: MM: using COPY for buffer copies
> [    7.062338] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    7.065331] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0b:00.0 on minor 1
> [    7.254317] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    7.446318] nouveau 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> [    8.501252] nvidia-gpu 0000:0b:00.3: enabling device (0000 -> 0002)
> [    8.696138] audit: type=1400 audit(1667665884.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=926 comm="apparmor_parser"
> [    8.696141] audit: type=1400 audit(1667665884.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=926 comm="apparmor_parser"
> [    8.704333] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops nv50_audio_component_bind_ops [nouveau])
> [    8.708797] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input15
> [    8.708903] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input16
> [    8.708936] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input17
> [    8.708965] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input18
> [    8.708994] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input19
> [    8.709032] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input20
> [    8.709065] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.2/0000:0b:00.1/sound/card1/input21
> [   10.776280] nouveau 0000:0b:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
> [ 3275.720190] nouveau 0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold

one thing which might help to figure out what's going on would be to
know the output of `lspci -t` and `grep .
/sys/bus/pci/devices/*/power/control`

> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
> timothy@localhost:~>
>


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-09 23:44 ` Karol Herbst
@ 2022-11-10 14:51   ` Timothy Madden
  0 siblings, 0 replies; 9+ messages in thread
From: Timothy Madden @ 2022-11-10 14:51 UTC (permalink / raw)
  To: nouveau

On 11/10/22 01:44, Karol Herbst wrote:
>> [   10.776280] nouveau 0000:0b:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
>> [ 3275.720190] nouveau 0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
> 
> one thing which might help to figure out what's going on would be to
> know the output of `lspci -t` and `grep .
> /sys/bus/pci/devices/*/power/control`

localhost:/home/timothy # lspci -t
-[0000:00]-+-00.0
            +-00.2
            +-01.0
            +-01.1-[01]----00.0
            +-01.3-[02-09]--+-00.0
            |               +-00.1
            |               \-00.2-[03-09]--+-00.0-[04]--
            |                               +-01.0-[05]--
            |                               +-02.0-[06]----00.0
            |                               +-03.0-[07]----00.0
            |                               +-04.0-[08]--
            |                               \-09.0-[09]----00.0
            +-02.0
            +-03.0
            +-03.1-[0a]--+-00.0
            |            \-00.1
            +-03.2-[0b]--+-00.0
            |            +-00.1
            |            +-00.2
            |            \-00.3
            +-04.0
            +-07.0
            +-07.1-[0c]--+-00.0
            |            +-00.2
            |            \-00.3
            +-08.0
            +-08.1-[0d]--+-00.0
            |            +-00.2
            |            \-00.3
            +-14.0
            +-14.3
            +-18.0
            +-18.1
            +-18.2
            +-18.3
            +-18.4
            +-18.5
            +-18.6
            \-18.7
localhost:/home/timothy # grep . /sys/bus/pci/devices/*/power/control
/sys/bus/pci/devices/0000:00:00.0/power/control:on
/sys/bus/pci/devices/0000:00:00.2/power/control:on
/sys/bus/pci/devices/0000:00:01.0/power/control:on
/sys/bus/pci/devices/0000:00:01.1/power/control:auto
/sys/bus/pci/devices/0000:00:01.3/power/control:auto
/sys/bus/pci/devices/0000:00:02.0/power/control:on
/sys/bus/pci/devices/0000:00:03.0/power/control:on
/sys/bus/pci/devices/0000:00:03.1/power/control:auto
/sys/bus/pci/devices/0000:00:03.2/power/control:auto
/sys/bus/pci/devices/0000:00:04.0/power/control:on
/sys/bus/pci/devices/0000:00:07.0/power/control:on
/sys/bus/pci/devices/0000:00:07.1/power/control:auto
/sys/bus/pci/devices/0000:00:08.0/power/control:on
/sys/bus/pci/devices/0000:00:08.1/power/control:auto
/sys/bus/pci/devices/0000:00:14.0/power/control:on
/sys/bus/pci/devices/0000:00:14.3/power/control:on
/sys/bus/pci/devices/0000:00:18.0/power/control:on
/sys/bus/pci/devices/0000:00:18.1/power/control:on
/sys/bus/pci/devices/0000:00:18.2/power/control:on
/sys/bus/pci/devices/0000:00:18.3/power/control:on
/sys/bus/pci/devices/0000:00:18.4/power/control:on
/sys/bus/pci/devices/0000:00:18.5/power/control:on
/sys/bus/pci/devices/0000:00:18.6/power/control:on
/sys/bus/pci/devices/0000:00:18.7/power/control:on
/sys/bus/pci/devices/0000:01:00.0/power/control:on
/sys/bus/pci/devices/0000:02:00.0/power/control:on
/sys/bus/pci/devices/0000:02:00.1/power/control:on
/sys/bus/pci/devices/0000:02:00.2/power/control:auto
/sys/bus/pci/devices/0000:03:00.0/power/control:auto
/sys/bus/pci/devices/0000:03:01.0/power/control:auto
/sys/bus/pci/devices/0000:03:02.0/power/control:auto
/sys/bus/pci/devices/0000:03:03.0/power/control:auto
/sys/bus/pci/devices/0000:03:04.0/power/control:auto
/sys/bus/pci/devices/0000:03:09.0/power/control:auto
/sys/bus/pci/devices/0000:06:00.0/power/control:auto
/sys/bus/pci/devices/0000:07:00.0/power/control:on
/sys/bus/pci/devices/0000:09:00.0/power/control:on
/sys/bus/pci/devices/0000:0a:00.0/power/control:auto
/sys/bus/pci/devices/0000:0a:00.1/power/control:auto
/sys/bus/pci/devices/0000:0b:00.0/power/control:on
/sys/bus/pci/devices/0000:0b:00.1/power/control:auto
/sys/bus/pci/devices/0000:0b:00.2/power/control:auto
/sys/bus/pci/devices/0000:0b:00.3/power/control:auto
/sys/bus/pci/devices/0000:0c:00.0/power/control:on
/sys/bus/pci/devices/0000:0c:00.2/power/control:on
/sys/bus/pci/devices/0000:0c:00.3/power/control:on
/sys/bus/pci/devices/0000:0d:00.0/power/control:on
/sys/bus/pci/devices/0000:0d:00.2/power/control:on
/sys/bus/pci/devices/0000:0d:00.3/power/control:auto
localhost:/home/timothy #



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-07 11:41 ` Karol Herbst
  2022-11-09 22:50   ` Ajay Gupta
@ 2022-11-10 15:01   ` Timothy Madden
  2022-11-10 15:36     ` Karol Herbst
  1 sibling, 1 reply; 9+ messages in thread
From: Timothy Madden @ 2022-11-10 15:01 UTC (permalink / raw)
  To: nouveau; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, Ajay Gupta

On 11/7/22 13:41, Karol Herbst wrote:
> On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com> wrote:
>>
>> Hello
>>
>> My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to recover
>> (I have to reboot) even when the card is idle or is only showing the desktop.
>>
>> This issue happens even when the card is not connected to a monitor.
>>
>> My dmesg output from nouveau is included below, I think the last 2 lines are
>> the relevant ones:
>> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
>> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
>>
>>
> 
> that's kind of odd, because "nvidia-gpu" implies you might have
> multiple drivers here? Though .3 should be some USB/UCSI or something
> related sub device on the GPU and Nvidia might have messed it up
> (adding the maintainer of the i2c-nvidia-gpu driver on CC).

Is there a way to check for multiple drivers ? I have openSUSE 
Tumbleweed at version 2022-11-08, and I did not install proprietary or 
other NVIDIA drivers.

> 
> Anyway, the fans are probably controlled by the Laptops firmware and

I meant the fans on the graphics card. No laptop here, my desktop 
computer has a Gigabyte X470 Aorus Gaming 5 WiFi motherboard with the 
latest UEFI from gigabyte web site.

> maybe something goes wrong with the runtime power management feature
> here, which as far as I can tell works on the Nouveau side, but
> i2c-nvidia-gpu might prevent the GPU from powering done and so causing
> more heat. It's also interesting that the GPU runs that hot, but given
> we don't support changing power states yet in Nouveau (still WIP
> wiring up the new released firmware from nvidia), not much we can do
> while the GPU is actually in use at this point.
> 
>>	


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-09 22:50   ` Ajay Gupta
@ 2022-11-10 15:22     ` Timothy Madden
  2022-11-10 15:40     ` Timothy Madden
  1 sibling, 0 replies; 9+ messages in thread
From: Timothy Madden @ 2022-11-10 15:22 UTC (permalink / raw)
  To: Ajay Gupta, Karol Herbst; +Cc: nouveau

[-- Attachment #1: Type: text/plain, Size: 3848 bytes --]


On 11/10/22 00:50, Ajay Gupta wrote:
>
>>> This issue happens even when the card is not connected to a monitor.
>>>
>>> My dmesg output from nouveau is included below, I think the last 2
>>> lines are the relevant ones:
>>> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state
>>> from D3hot to D0, device inaccessible [ 9427.889387] nvidia-gpu
>>> 0000:0b:00.3: i2c timeout error ffffffff
> This only implies that there is no usb/ucsi device on the card, it is expected from
> such cards and should be seen in dmesg even when heating issue is not there.
>
> Thanks

The 2080 Ti graphics card has an USB-C output, that works if I connect 
an USB storage device
(see the DataTraveler device below).

Should I try the USB port as a video output ? I need to bring in an 
USB-C monitor first
from a different location. I also have an USB-C to HDMI adapter, but 
using such an
adapter gives a different crash with nouveau driver, that I found on a 
different machine
(my work laptop at the time), that I reported before. So I suppose it 
would not be a
good test now.


localhost:/home/timothy #lsusb
Bus 008 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 0951:176c Kingston Technology DataTraveler Max
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 11b0:5111 ATECH FLASH TECHNOLOGY PRO88 Reader
Bus 002 Device 002: ID 11b0:0031 ATECH FLASH TECHNOLOGY USB3.1 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 09da:2268 A4Tech Co., Ltd. USB Keyboard
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 8087:0025 Intel Corp. Wireless-AC 9260 Bluetooth 
Adapter
Bus 001 Device 005: ID 046d:c24a Logitech, Inc. G600 Gaming Mouse
Bus 001 Device 002: ID 11b0:0021 ATECH FLASH TECHNOLOGY USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
localhost:/home/timothy #lsusb --tree
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 10000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 10000M
    |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 
5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 2: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 9: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 3: Dev 6, If 0, Class=Human Interface Device, 
Driver=usbhid, 1.5M
        |__ Port 3: Dev 6, If 1, Class=Human Interface Device, 
Driver=usbhid, 1.5M
    |__ Port 10: Dev 5, If 0, Class=Human Interface Device, 
Driver=usbhid, 12M
    |__ Port 10: Dev 5, If 1, Class=Human Interface Device, 
Driver=usbhid, 12M
localhost:/home/timothy #


[-- Attachment #2: Type: text/html, Size: 6270 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-10 15:01   ` Timothy Madden
@ 2022-11-10 15:36     ` Karol Herbst
  0 siblings, 0 replies; 9+ messages in thread
From: Karol Herbst @ 2022-11-10 15:36 UTC (permalink / raw)
  To: Timothy Madden
  Cc: nouveau, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, Ajay Gupta

On Thu, Nov 10, 2022 at 4:01 PM Timothy Madden <terminatorul@gmail.com> wrote:
>
> On 11/7/22 13:41, Karol Herbst wrote:
> > On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com> wrote:
> >>
> >> Hello
> >>
> >> My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to recover
> >> (I have to reboot) even when the card is idle or is only showing the desktop.
> >>
> >> This issue happens even when the card is not connected to a monitor.
> >>
> >> My dmesg output from nouveau is included below, I think the last 2 lines are
> >> the relevant ones:
> >> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state from D3hot to D0, device inaccessible
> >> [ 9427.889387] nvidia-gpu 0000:0b:00.3: i2c timeout error ffffffff
> >>
> >>
> >
> > that's kind of odd, because "nvidia-gpu" implies you might have
> > multiple drivers here? Though .3 should be some USB/UCSI or something
> > related sub device on the GPU and Nvidia might have messed it up
> > (adding the maintainer of the i2c-nvidia-gpu driver on CC).
>
> Is there a way to check for multiple drivers ? I have openSUSE
> Tumbleweed at version 2022-11-08, and I did not install proprietary or
> other NVIDIA drivers.
>
> >
> > Anyway, the fans are probably controlled by the Laptops firmware and
>
> I meant the fans on the graphics card. No laptop here, my desktop
> computer has a Gigabyte X470 Aorus Gaming 5 WiFi motherboard with the
> latest UEFI from gigabyte web site.
>

ah, then I got that part wrong. Okay if that's a desktop GPU, then
it's something we literally can't fix. We require signed firmware in
order to control the fans from a driver side. What you seem to
experience is the GPU doing it itself, because it overheats. Sad part,
we can't change the clock without signed firmware either. What could
help is the new GSP firmware we got, but that's still WIP and would
require you to compile your kernel and fetch a firmware from somewhere
and then it might not even work correctly yet.

> > maybe something goes wrong with the runtime power management feature
> > here, which as far as I can tell works on the Nouveau side, but
> > i2c-nvidia-gpu might prevent the GPU from powering done and so causing
> > more heat. It's also interesting that the GPU runs that hot, but given
> > we don't support changing power states yet in Nouveau (still WIP
> > wiring up the new released firmware from nvidia), not much we can do
> > while the GPU is actually in use at this point.
> >
> >>
>


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Nouveau] Fans ramping up randomly when idle
  2022-11-09 22:50   ` Ajay Gupta
  2022-11-10 15:22     ` Timothy Madden
@ 2022-11-10 15:40     ` Timothy Madden
  1 sibling, 0 replies; 9+ messages in thread
From: Timothy Madden @ 2022-11-10 15:40 UTC (permalink / raw)
  To: Ajay Gupta, Karol Herbst; +Cc: nouveau


On 11/10/22 00:50, Ajay Gupta wrote:
>
>> On Sat, Nov 5, 2022 at 8:36 PM Timothy Madden <terminatorul@gmail.com>
>> wrote:
>>> Hello
>>>
>>> My Msi Gaming X Trio 2080 Ti randomly ramps up the fans with no way to
>>> recover (I have to reboot) even when the card is idle or is only showing the
>> desktop.
>>> This issue happens even when the card is not connected to a monitor.
>>>
>>> My dmesg output from nouveau is included below, I think the last 2
>>> lines are the relevant ones:
>>> [ 9426.768449] nvidia-gpu 0000:0b:00.3: Unable to change power state
>>> from D3hot to D0, device inaccessible [ 9427.889387] nvidia-gpu
>>> 0000:0b:00.3: i2c timeout error ffffffff
> This only implies that there is no usb/ucsi device on the card, it is expected from
> such cards and should be seen in dmesg even when heating issue is not there.
>
>

More dmesg output from another session showing the same message from 
xhci_hcd,
plus a kernel trace occurs when trying to shut down the computer


Nov 10 14:39:58.800882 localhost kernel: thermal thermal_zone1: failed 
to read out thermal zone (-61)
Nov 10 14:39:58.804606 localhost kernel: input: HD-Audio Generic Front 
Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input22
Nov 10 14:39:58.804644 localhost kernel: input: HD-Audio Generic Rear 
Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input23
Nov 10 14:39:58.804662 localhost kernel: input: HD-Audio Generic Line as 
/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input24
Nov 10 14:39:58.804679 localhost kernel: input: HD-Audio Generic Line 
Out Front as 
/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input25
Nov 10 14:39:58.804695 localhost kernel: input: HD-Audio Generic Line 
Out Surround as 
/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input26
Nov 10 14:39:58.804712 localhost kernel: input: HD-Audio Generic Line 
Out CLFE as 
/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input27
Nov 10 14:39:58.804729 localhost kernel: input: HD-Audio Generic Front 
Headphone as 
/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card2/input28
Nov 10 14:39:58.812600 localhost kernel: Bluetooth: hci0: Found device 
firmware: intel/ibt-18-16-1.sfi
Nov 10 14:39:58.812635 localhost kernel: Bluetooth: hci0: Boot Address: 
0x40800
Nov 10 14:39:58.812651 localhost kernel: Bluetooth: hci0: Firmware 
Version: 214-6.22
Nov 10 14:39:58.812665 localhost kernel: Bluetooth: hci0: Firmware 
already loaded
Nov 10 14:39:58.844599 localhost kernel: iwlwifi 0000:06:00.0: base HW 
address: d4:6d:6d:ad:12:bd, OTP minor version: 0x4
Nov 10 14:39:58.912599 localhost kernel: ieee80211 phy0: Selected rate 
control algorithm 'iwl-mvm-rs'
Nov 10 14:39:58.976599 localhost kernel: iwlwifi 0000:06:00.0 wlp6s0: 
renamed from wlan0
Nov 10 14:39:59.068610 localhost kernel: intel_rapl_common: Found RAPL 
domain package
Nov 10 14:39:59.068681 localhost kernel: intel_rapl_common: Found RAPL 
domain core
Nov 10 14:39:59.548603 localhost kernel: EXT4-fs (sda3): mounted 
filesystem with ordered data mode. Quota mode: none.
Nov 10 14:40:00.100765 localhost kernel: Bluetooth: BNEP (Ethernet 
Emulation) ver 1.3
Nov 10 14:40:00.100802 localhost kernel: Bluetooth: BNEP filters: 
protocol multicast
Nov 10 14:40:00.100817 localhost kernel: Bluetooth: BNEP socket layer 
initialized
Nov 10 14:40:00.100833 localhost kernel: Bluetooth: MGMT ver 1.22
Nov 10 14:40:00.100847 localhost kernel: NET: Registered PF_ALG protocol 
family
Nov 10 14:40:00.252604 localhost kernel: NET: Registered PF_QIPCRTR 
protocol family
Nov 10 14:40:00.392608 localhost kernel: bpfilter: Loaded bpfilter_umh 
pid 1434
Nov 10 14:40:00.392695 localhost unknown: Started bpfilter
Nov 10 14:40:00.692608 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692657 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692680 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692698 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692720 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692738 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692753 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.700598 localhost.localdomain kernel: amdgpu 
0000:0a:00.0: vgaarb: changed VGA decodes: 
olddecodes=io+mem,decodes=none:owns=io+mem
Nov 10 14:40:00.700757 localhost.localdomain kernel: nouveau 
0000:0b:00.0: vgaarb: changed VGA decodes: 
olddecodes=io+mem,decodes=none:owns=none
Nov 10 14:40:00.932605 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932660 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932688 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932709 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932729 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932767 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932790 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:01.036607 localhost.localdomain kernel: NET: Registered 
PF_PACKET protocol family
Nov 10 14:40:03.344601 localhost.localdomain kernel: igb 0000:07:00.0 
enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: 
RX/TX
Nov 10 14:40:03.672602 localhost.localdomain kernel: IPv6: 
ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
Nov 10 14:40:07.783797 localhost.localdomain systemd-journald[759]: Time 
jumped backwards, rotating.
Nov 10 14:40:10.122652 localhost.localdomain kernel: Bluetooth: RFCOMM 
TTY layer initialized
Nov 10 14:40:10.122672 localhost.localdomain kernel: Bluetooth: RFCOMM 
socket layer initialized
Nov 10 14:40:10.122683 localhost.localdomain kernel: Bluetooth: RFCOMM 
ver 1.11
Nov 10 15:34:21.665521 localhost.localdomain kernel: nouveau 
0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
Nov 10 15:56:57.670622 localhost.localdomain kernel: nouveau 
0000:0b:00.0: therm: temperature (95 C) hit the 'downclock' threshold
Nov 10 14:39:58.812665 localhost kernel: Bluetooth: hci0: Firmware 
already loaded
Nov 10 14:39:58.844599 localhost kernel: iwlwifi 0000:06:00.0: base HW 
address: d4:6d:6d:ad:12:bd, OTP minor version: 0x4
Nov 10 14:39:58.912599 localhost kernel: ieee80211 phy0: Selected rate 
control algorithm 'iwl-mvm-rs'
Nov 10 14:39:58.976599 localhost kernel: iwlwifi 0000:06:00.0 wlp6s0: 
renamed from wlan0
Nov 10 14:39:59.068610 localhost kernel: intel_rapl_common: Found RAPL 
domain package
Nov 10 14:39:59.068681 localhost kernel: intel_rapl_common: Found RAPL 
domain core
Nov 10 14:39:59.548603 localhost kernel: EXT4-fs (sda3): mounted 
filesystem with ordered data mode. Quota mode: none.
Nov 10 14:40:00.100765 localhost kernel: Bluetooth: BNEP (Ethernet 
Emulation) ver 1.3
Nov 10 14:40:00.100802 localhost kernel: Bluetooth: BNEP filters: 
protocol multicast
Nov 10 14:40:00.100817 localhost kernel: Bluetooth: BNEP socket layer 
initialized
Nov 10 14:40:00.100833 localhost kernel: Bluetooth: MGMT ver 1.22
Nov 10 14:40:00.100847 localhost kernel: NET: Registered PF_ALG protocol 
family
Nov 10 14:40:00.252604 localhost kernel: NET: Registered PF_QIPCRTR 
protocol family
Nov 10 14:40:00.392608 localhost kernel: bpfilter: Loaded bpfilter_umh 
pid 1434
Nov 10 14:40:00.392695 localhost unknown: Started bpfilter
Nov 10 14:40:00.692608 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692657 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692680 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692698 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692720 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692738 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.692753 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.700598 localhost.localdomain kernel: amdgpu 
0000:0a:00.0: vgaarb: changed VGA decodes: 
olddecodes=io+mem,decodes=none:owns=io+mem
Nov 10 14:40:00.700757 localhost.localdomain kernel: nouveau 
0000:0b:00.0: vgaarb: changed VGA decodes: 
olddecodes=io+mem,decodes=none:owns=none
Nov 10 14:40:00.932605 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932660 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932688 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932709 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932729 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932767 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:00.932790 localhost.localdomain kernel: ACPI: \: failed to 
evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
Nov 10 14:40:01.036607 localhost.localdomain kernel: NET: Registered 
PF_PACKET protocol family
Nov 10 14:40:03.344601 localhost.localdomain kernel: igb 0000:07:00.0 
enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: 
RX/TX
Nov 10 14:40:03.672602 localhost.localdomain kernel: IPv6: 
ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
Nov 10 14:40:07.783797 localhost.localdomain systemd-journald[759]: Time 
jumped backwards, rotating.
Nov 10 14:40:10.122652 localhost.localdomain kernel: Bluetooth: RFCOMM 
TTY layer initialized
Nov 10 14:40:10.122672 localhost.localdomain kernel: Bluetooth: RFCOMM 
socket layer initialized
Nov 10 14:40:10.122683 localhost.localdomain kernel: Bluetooth: RFCOMM 
ver 1.11
Nov 10 15:34:21.665521 localhost.localdomain kernel: nouveau 
0000:0b:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
Nov 10 15:56:57.670622 localhost.localdomain kernel: nouveau 
0000:0b:00.0: therm: temperature (95 C) hit the 'downclock' threshold
Nov 10 16:00:02.318661 localhost.localdomain kernel: nvidia-gpu 
0000:0b:00.3: Unable to change power state from D3hot to D0, device 
inaccessible
Nov 10 16:00:02.378659 localhost.localdomain kernel: xhci_hcd 
0000:0b:00.2: Unable to change power state from D3hot to D0, device 
inaccessible
Nov 10 16:00:02.438659 localhost.localdomain kernel: xhci_hcd 
0000:0b:00.2: Unable to change power state from D3cold to D0, device 
inaccessible
Nov 10 16:00:02.438970 localhost.localdomain kernel: xhci_hcd 
0000:0b:00.2: Controller not ready at resume -19
Nov 10 16:00:02.439185 localhost.localdomain kernel: xhci_hcd 
0000:0b:00.2: PCI post-resume error -19!
Nov 10 16:00:02.439380 localhost.localdomain kernel: xhci_hcd 
0000:0b:00.2: HC died; cleaning up
Nov 10 16:00:03.438657 localhost.localdomain kernel: nvidia-gpu 
0000:0b:00.3: i2c timeout error ffffffff
Nov 10 16:00:03.438965 localhost.localdomain kernel: ucsi_ccg 28-0008: 
i2c_transfer failed -110
Nov 10 16:01:22.954678 localhost.localdomain kernel: show_signal_msg: 46 
callbacks suppressed
Nov 10 16:01:22.954803 localhost.localdomain kernel: kwalletd5[2791]: 
segfault at 557dd537c ip 00007f86b7476213 sp 00007ffca735cd70 error 4 in 
libqca-qt5.so.2.3.5[7f86b7466000+7a000]
Nov 10 16:01:22.954846 localhost.localdomain kernel: Code: 1f 84 00 00 
00 00 00 8b 47 10 85 c0 7e 69 53 80 3f 00 74 2b 48 8b 5f 18 48 85 db 74 
52 48 8b 7b 10 8b 53 0c 48 8b 33 48 8b 07 <ff> 50 08 48 89 df be 18 00 
00 00 5b e9 ac 01 ff ff 0f 1f 40 00 48
Nov 10 16:01:47.207199 localhost.localdomain kernel: nouveau 
0000:0b:00.0: timer: stalled at ffffffffffffffff
Nov 10 16:01:47.207632 localhost.localdomain kernel: ------------[ cut 
here ]------------
Nov 10 16:01:47.207861 localhost.localdomain kernel: nouveau 
0000:0b:00.0: timeout
Nov 10 16:01:47.207905 localhost.localdomain kernel: WARNING: CPU: 0 
PID: 1506 at drivers/gpu/drm/nouveau/nvkm/subdev/bar/g84.c:35 
g84_bar_flush+0xca/0xe0 [nouveau]
Nov 10 16:01:47.207941 localhost.localdomain kernel: Modules linked in: 
rfcomm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet 
nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct af_packet nft_chain_nat 
nf_tables ip6table_nat ip6table_mangle ip6table_raw ip6table_security 
iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 
iptable_mangle>
Nov 10 16:01:47.208040 localhost.localdomain kernel:  snd joydev 
soundcore ecdh_generic dca rfkill thermal gpio_amdpt gpio_generic 
tiny_power_button acpi_cpufreq fuse configfs ip_tables x_tables 
hid_generic usbhid uas usb_storage amdgpu crct10dif_pclmul crc32_pclmul 
nouveau polyval_clmulni polyval_generic gf128mul ghash_clmulni_intel 
video iommu_v2 drm_ttm_h>
Nov 10 16:01:47.208100 localhost.localdomain kernel: CPU: 0 PID: 1506 
Comm: Xorg.bin Not tainted 6.0.7-1-default #1 openSUSE Tumbleweed 
5e8b6dc6c4ea2058c3659c46d114e84bdc37a88e
Nov 10 16:01:47.208138 localhost.localdomain kernel: Hardware name: 
Gigabyte Technology Co., Ltd. X470 AORUS GAMING 5 WIFI/X470 AORUS GAMING 
5 WIFI-CF, BIOS F63c 07/20/2022
Nov 10 16:01:47.208167 localhost.localdomain kernel: RIP: 
0010:g84_bar_flush+0xca/0xe0 [nouveau]
Nov 10 16:01:47.208195 localhost.localdomain kernel: Code: 8b 40 10 48 
8b 78 10 48 8b 5f 50 48 85 db 75 03 48 8b 1f e8 88 9e e8 e0 48 89 da 48 
c7 c7 8e 7f aa c0 48 89 c6 e8 81 94 1b e1 <0f> 0b eb aa e8 8d a6 20 e1 
66 66 2e 0f 1f 84 00 00 00 00 00 66 90
Nov 10 16:01:47.208229 localhost.localdomain kernel: RSP: 
0018:ffffb5e4c0c338a8 EFLAGS: 00010086
Nov 10 16:01:47.208254 localhost.localdomain kernel: RAX: 
0000000000000000 RBX: ffff937b018f8850 RCX: 0000000000000027
Nov 10 16:01:47.208282 localhost.localdomain kernel: RDX: 
ffff937e3ea224e8 RSI: 0000000000000001 RDI: ffff937e3ea224e0
Nov 10 16:01:47.208310 localhost.localdomain kernel: RBP: 
ffff937b00f3b918 R08: 0000000000000000 R09: ffffb5e4c0c33750
Nov 10 16:01:47.208341 localhost.localdomain kernel: R10: 
0000000000000003 R11: ffff937e3e7fffe8 R12: 0000000000000246
Nov 10 16:01:47.208377 localhost.localdomain kernel: R13: 
0000000000000010 R14: 0000000000000004 R15: 0000000000000006
Nov 10 16:01:47.208414 localhost.localdomain kernel: FS: 
00007fee02b02940(0000) GS:ffff937e3ea00000(0000) knlGS:0000000000000000
Nov 10 16:01:47.208447 localhost.localdomain kernel: CS:  0010 DS: 0000 
ES: 0000 CR0: 0000000080050033
Nov 10 16:01:47.208474 localhost.localdomain kernel: CR2: 
000055c259db74c0 CR3: 0000000106ec6000 CR4: 00000000003506f0
Nov 10 16:01:47.208503 localhost.localdomain kernel: Call Trace:
Nov 10 16:01:47.208527 localhost.localdomain kernel:  <TASK>
Nov 10 16:01:47.208557 localhost.localdomain kernel: 
nv50_instobj_release+0x2a/0xa0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208586 localhost.localdomain kernel: 
nvkm_vmm_iter.constprop.0+0x7e4/0x880 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208622 localhost.localdomain kernel:  ? 
nvkm_vmm_ptes_sparse+0x1e0/0x1e0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208662 localhost.localdomain kernel:  ? 
gp100_vmm_pgt_sparse+0xc0/0xc0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208700 localhost.localdomain kernel: 
nvkm_vmm_put_locked+0x105/0x280 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208733 localhost.localdomain kernel:  ? 
nvkm_vmm_ptes_sparse+0x1e0/0x1e0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208756 localhost.localdomain kernel:  ? 
gp100_vmm_pgt_sparse+0xc0/0xc0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208778 localhost.localdomain kernel: 
nvkm_uvmm_mthd+0x672/0x6a0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208814 localhost.localdomain kernel:  ? 
btrfs_block_rsv_release+0x161/0x1c0 [btrfs 
99d03bf8982233f7af3195e0b6d760148166d664]
Nov 10 16:01:47.208844 localhost.localdomain kernel: 
nvkm_ioctl+0xd8/0x180 [nouveau 34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208868 localhost.localdomain kernel: 
nvif_object_mthd+0xc1/0x1f0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.208896 localhost.localdomain kernel:  ? 
__count_memcg_events+0x2c/0x80
Nov 10 16:01:47.208923 localhost.localdomain kernel:  ? 
uncharge_batch+0xca/0x120
Nov 10 16:01:47.208951 localhost.localdomain kernel:  ? 
__slab_free+0xc4/0x2f0
Nov 10 16:01:47.208986 localhost.localdomain kernel: 
nvif_vmm_put+0x60/0x80 [nouveau 34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.209015 localhost.localdomain kernel: 
nouveau_vma_del+0x7c/0xb0 [nouveau 34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.209049 localhost.localdomain kernel: 
nouveau_gem_object_close+0x1cb/0x1e0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.209072 localhost.localdomain kernel: 
drm_gem_handle_delete+0x69/0xd0
Nov 10 16:01:47.209098 localhost.localdomain kernel:  ? 
drm_mode_destroy_dumb+0x40/0x40
Nov 10 16:01:47.209504 localhost.localdomain kernel: 
drm_ioctl_kernel+0xc1/0x160
Nov 10 16:01:47.209531 localhost.localdomain kernel: drm_ioctl+0x21f/0x420
Nov 10 16:01:47.209558 localhost.localdomain kernel:  ? 
drm_mode_destroy_dumb+0x40/0x40
Nov 10 16:01:47.209590 localhost.localdomain kernel:  ? 
tlb_finish_mmu+0x65/0x170
Nov 10 16:01:47.209633 localhost.localdomain kernel:  ? 
__slab_free+0xc4/0x2f0
Nov 10 16:01:47.209669 localhost.localdomain kernel: 
nouveau_drm_ioctl+0x56/0xb0 [nouveau 
34ea2b686d636eb789a9af34726a5f23f567b847]
Nov 10 16:01:47.209696 localhost.localdomain kernel: 
__x64_sys_ioctl+0x90/0xd0
Nov 10 16:01:47.209724 localhost.localdomain kernel: do_syscall_64+0x5b/0x80
Nov 10 16:01:47.209750 localhost.localdomain kernel:  ? 
__vm_munmap+0x93/0x130
Nov 10 16:01:47.209773 localhost.localdomain kernel:  ? 
syscall_exit_to_user_mode+0x17/0x40
Nov 10 16:01:47.209795 localhost.localdomain kernel:  ? 
do_syscall_64+0x67/0x80
Nov 10 16:01:47.209818 localhost.localdomain kernel:  ? 
exc_page_fault+0x66/0x150
Nov 10 16:01:47.209844 localhost.localdomain kernel: 
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Nov 10 16:01:47.209870 localhost.localdomain kernel: RIP: 
0033:0x7fee0301c9bf
Nov 10 16:01:47.209896 localhost.localdomain kernel: Code: 00 48 89 44 
24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 
24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 
48 8b 44 24 18 64 48 2b 04 25 28 00 00
Nov 10 16:01:47.209923 localhost.localdomain kernel: RSP: 
002b:00007ffe8c577e00 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
Nov 10 16:01:47.209952 localhost.localdomain kernel: RAX: 
ffffffffffffffda RBX: 000055c25a6f8680 RCX: 00007fee0301c9bf
Nov 10 16:01:47.209971 localhost.localdomain kernel: RDX: 
00007ffe8c577e94 RSI: 00000000c00464b4 RDI: 0000000000000015
Nov 10 16:01:47.209992 localhost.localdomain kernel: RBP: 
00007ffe8c577e94 R08: 000055c25a6f83b0 R09: 00007fee03748840
Nov 10 16:01:47.210018 localhost.localdomain kernel: R10: 
00007fee02f21e90 R11: 0000000000000246 R12: 00000000c00464b4
Nov 10 16:01:47.210045 localhost.localdomain kernel: R13: 
0000000000000015 R14: 000055c25a024dc0 R15: 00007fee02722a60
Nov 10 16:01:47.210067 localhost.localdomain kernel: </TASK>
Nov 10 16:01:47.210093 localhost.localdomain kernel: ---[ end trace 
0000000000000000 ]---
Nov 10 16:01:47.210116 localhost.localdomain kernel: nouveau 
0000:0b:00.0: timer: stalled at ffffffffffffffff


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2023-05-04 12:32 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-05 19:31 [Nouveau] Fans ramping up randomly when idle Timothy Madden
2022-11-07 11:41 ` Karol Herbst
2022-11-09 22:50   ` Ajay Gupta
2022-11-10 15:22     ` Timothy Madden
2022-11-10 15:40     ` Timothy Madden
2022-11-10 15:01   ` Timothy Madden
2022-11-10 15:36     ` Karol Herbst
2022-11-09 23:44 ` Karol Herbst
2022-11-10 14:51   ` Timothy Madden

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.