Re: [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared devices

Re: [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared devices

[Александр Берсенев]

[-- Attachment #1: Type: text/plain, Size: 2027 bytes --]

[PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared 
devices

This patch adds documentation for Device-Tree bindings for sunxi IR 
controller. 

Signed-off-by: Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
Signed-off-by: Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>

diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt 
b/Documentation/devicetree/bindings/media/sunxi-ir.txt
new file mode 100644
index 0000000..d502cf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -0,0 +1,23 @@
+Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
+
+Required properties:
+- compatible    : should be "allwinner,sun7i-a20-ir";
+- clocks    : list of clock specifiers, corresponding to
+      entries in clock-names property;
+- clock-names    : should contain "apb0_ir0" and "ir0" entries;
+- interrupts    : should contain IR IRQ number;
+- reg    : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : Remote control map name.
+
+Example:
+
+ir0: ir@01c21800 {
+       compatible = "allwinner,sun7i-a20-ir";
+       clocks = <&apb0_gates 6>, <&ir0_clk>;
+       clock-names = "apb0_ir0", "ir0";
+       interrupts = <0 5 1>;
+       reg = <0x01C21800 0x40>;
+       linux,rc-map-name = "rc-rc6-mce";
+};


среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев 
написал:
>
> This patch introduces Consumer IR(CIR) support for sunxi boards.
>
> This is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
>

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: Type: text/html, Size: 3651 bytes --]

Re: [linux-sunxi] Re: [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared devices

[Chen-Yu Tsai]

Hi,

On Wed, Apr 30, 2014 at 6:54 PM, Александр Берсенев <bay@hackerdom.ru> wrote:
> [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared
> devices
>
> This patch adds documentation for Device-Tree bindings for sunxi IR
> controller.
>
> Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt
> b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> new file mode 100644
> index 0000000..d502cf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> @@ -0,0 +1,23 @@
> +Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
> +
> +Required properties:
> +- compatible    : should be "allwinner,sun7i-a20-ir";
> +- clocks    : list of clock specifiers, corresponding to
> +      entries in clock-names property;
> +- clock-names    : should contain "apb0_ir0" and "ir0" entries;
> +- interrupts    : should contain IR IRQ number;
> +- reg    : should contain IO map address for IR.
> +
> +Optional properties:
> +- linux,rc-map-name : Remote control map name.
> +
> +Example:
> +
> +ir0: ir@01c21800 {
> +       compatible = "allwinner,sun7i-a20-ir";
> +       clocks = <&apb0_gates 6>, <&ir0_clk>;
> +       clock-names = "apb0_ir0", "ir0";
> +       interrupts = <0 5 1>;
> +       reg = <0x01C21800 0x40>;
> +       linux,rc-map-name = "rc-rc6-mce";

You seem to be mixing spaces and tabs here, with spaces in front.
(Gmail messed this up. See the original post.)
Please stick to using tabs first, and spaces for alignment.


ChenYu

> +};
>
>
> среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев
> написал:
>>
>> This patch introduces Consumer IR(CIR) support for sunxi boards.
>>
>> This is based on Alexsey Shestacov's work based on the original driver
>> supplied by Allwinner.

[linux-sunxi] Re: [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared devices

[Chen-Yu Tsai]

Hi,

On Wed, Apr 30, 2014 at 6:54 PM, ????????? ???????? <bay@hackerdom.ru> wrote:
> [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared
> devices
>
> This patch adds documentation for Device-Tree bindings for sunxi IR
> controller.
>
> Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt
> b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> new file mode 100644
> index 0000000..d502cf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> @@ -0,0 +1,23 @@
> +Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
> +
> +Required properties:
> +- compatible    : should be "allwinner,sun7i-a20-ir";
> +- clocks    : list of clock specifiers, corresponding to
> +      entries in clock-names property;
> +- clock-names    : should contain "apb0_ir0" and "ir0" entries;
> +- interrupts    : should contain IR IRQ number;
> +- reg    : should contain IO map address for IR.
> +
> +Optional properties:
> +- linux,rc-map-name : Remote control map name.
> +
> +Example:
> +
> +ir0: ir at 01c21800 {
> +       compatible = "allwinner,sun7i-a20-ir";
> +       clocks = <&apb0_gates 6>, <&ir0_clk>;
> +       clock-names = "apb0_ir0", "ir0";
> +       interrupts = <0 5 1>;
> +       reg = <0x01C21800 0x40>;
> +       linux,rc-map-name = "rc-rc6-mce";

You seem to be mixing spaces and tabs here, with spaces in front.
(Gmail messed this up. See the original post.)
Please stick to using tabs first, and spaces for alignment.


ChenYu

> +};
>
>
> ?????, 30 ?????? 2014 ?., 16:51:12 UTC+6 ???????????? ????????? ????????
> ???????:
>>
>> This patch introduces Consumer IR(CIR) support for sunxi boards.
>>
>> This is based on Alexsey Shestacov's work based on the original driver
>> supplied by Allwinner.

Re: Re: [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared devices

[Chen-Yu Tsai]

Hi,

On Wed, Apr 30, 2014 at 6:54 PM, Александр Берсенев <bay@hackerdom.ru> wrote:
> [PATCH v4 01/03] ARM: sunxi: Add documentation for sunxi consumer infrared
> devices
>
> This patch adds documentation for Device-Tree bindings for sunxi IR
> controller.
>
> Signed-off-by: Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
> Signed-off-by: Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt
> b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> new file mode 100644
> index 0000000..d502cf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
> @@ -0,0 +1,23 @@
> +Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
> +
> +Required properties:
> +- compatible    : should be "allwinner,sun7i-a20-ir";
> +- clocks    : list of clock specifiers, corresponding to
> +      entries in clock-names property;
> +- clock-names    : should contain "apb0_ir0" and "ir0" entries;
> +- interrupts    : should contain IR IRQ number;
> +- reg    : should contain IO map address for IR.
> +
> +Optional properties:
> +- linux,rc-map-name : Remote control map name.
> +
> +Example:
> +
> +ir0: ir@01c21800 {
> +       compatible = "allwinner,sun7i-a20-ir";
> +       clocks = <&apb0_gates 6>, <&ir0_clk>;
> +       clock-names = "apb0_ir0", "ir0";
> +       interrupts = <0 5 1>;
> +       reg = <0x01C21800 0x40>;
> +       linux,rc-map-name = "rc-rc6-mce";

You seem to be mixing spaces and tabs here, with spaces in front.
(Gmail messed this up. See the original post.)
Please stick to using tabs first, and spaces for alignment.


ChenYu

> +};
>
>
> среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев
> написал:
>>
>> This patch introduces Consumer IR(CIR) support for sunxi boards.
>>
>> This is based on Alexsey Shestacov's work based on the original driver
>> supplied by Allwinner.

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller

[Александр Берсенев]

[-- Attachment #1: Type: text/plain, Size: 10791 bytes --]

[PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller

This patch adds driver for sunxi IR controller.
It is based on Alexsey Shestacov's work based on the original driver 
supplied by Allwinner.

Signed-off-by: Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
Signed-off-by: Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 8fbd377..9427fad 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -343,4 +343,14 @@ config RC_ST
 
  If you're not sure, select N here.
 
+config IR_SUNXI
+    tristate "SUNXI IR remote control"
+    depends on RC_CORE
+    depends on ARCH_SUNXI
+    ---help---
+      Say Y if you want to use sunXi internal IR Controller
+
+      To compile this driver as a module, choose M here: the module will
+      be called sunxi-ir.
+
 endif #RC_DEVICES
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index f8b54ff..93cdbe9 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
 obj-$(CONFIG_IR_IGUANA) += iguanair.o
 obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
 obj-$(CONFIG_RC_ST) += st_rc.o
+obj-$(CONFIG_IR_SUNXI) += sunxi-ir.o
 obj-$(CONFIG_IR_IMG) += img-ir/
diff --git a/drivers/media/rc/sunxi-ir.c b/drivers/media/rc/sunxi-ir.c
new file mode 100644
index 0000000..f051d94
--- /dev/null
+++ b/drivers/media/rc/sunxi-ir.c
@@ -0,0 +1,303 @@
+/*
+ * Driver for Allwinner sunXi IR controller
+ *
+ * Copyright (C) 2014 Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>
+ * Copyright (C) 2014 Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
+ *
+ * Based on sun5i-ir.c:
+ * Copyright (C) 2007-2012 Daniel Wang
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <media/rc-core.h>
+
+#define SUNXI_IR_DEV "sunxi-ir"
+
+/* Registers */
+/* IR Control */
+#define SUNXI_IR_CTL_REG      0x00
+/* Rx Config */
+#define SUNXI_IR_RXCTL_REG    0x10
+/* Rx Data */
+#define SUNXI_IR_RXFIFO_REG   0x20
+/* Rx Interrupt Enable */
+#define SUNXI_IR_RXINT_REG    0x2C
+/* Rx Interrupt Status */
+#define SUNXI_IR_RXSTA_REG    0x30
+/* IR Sample Config */
+#define SUNXI_IR_CIR_REG      0x34
+
+/* Bit Definition of IR_RXINTS_REG Register */
+#define SUNXI_IR_RXINTS_RXOF  BIT(0) /* Rx FIFO Overflow */
+#define SUNXI_IR_RXINTS_RXPE  BIT(1) /* Rx Packet End */
+#define SUNXI_IR_RXINTS_RXDA  BIT(4) /* Rx FIFO Data Available */
+/* Hardware supported fifo size */
+#define SUNXI_IR_FIFO_SIZE    16
+/* How much messages in fifo triggers IRQ */
+#define SUNXI_IR_FIFO_TRIG    8
+/* Required frequency for IR0 or IR1 clock in CIR mode */
+#define SUNXI_IR_BASE_CLK     8000000
+/* Frequency after IR internal divider  */
+#define SUNXI_IR_CLK          (SUNXI_IR_BASE_CLK / 64)
+/* Sample period in ns */
+#define SUNXI_IR_SAMPLE       (1000000000ul / SUNXI_IR_CLK)
+/* Filter threshold in samples  */
+#define SUNXI_IR_RXFILT       1
+/* Idle Threshold in samples */
+#define SUNXI_IR_RXIDLE       20
+/* Time after which device stops sending data in ms */
+#define SUNXI_IR_TIMEOUT      120
+
+struct sunxi_ir {
+ spinlock_t      ir_lock;
+ struct rc_dev   *rc;
+ void __iomem    *base;
+ int             irq;
+ struct clk      *clk;
+ struct clk      *apb_clk;
+ const char      *map_name;
+};
+
+static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
+{
+ unsigned long status;
+ unsigned char dt;
+ unsigned int cnt, rc;
+ struct sunxi_ir *ir = dev_id;
+ DEFINE_IR_RAW_EVENT(rawir);
+
+ spin_lock_irq(&ir->ir_lock);
+
+ status = readl(ir->base + SUNXI_IR_RXSTA_REG);
+
+ /* clean all pending statuses */
+ writel(status | 0xff, ir->base + SUNXI_IR_RXSTA_REG);
+
+ if (status & SUNXI_IR_RXINTS_RXDA) {
+ /* How much messages in fifo */
+ rc  = (status >> 8) & 0x3f;
+ /* Sanity check */
+ rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
+ /* if we have data */
+ for (cnt = 0; cnt < rc; cnt++) {
+ /* for each bit in fifo */
+ dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
+ rawir.pulse = (dt & 0x80) != 0;
+ rawir.duration = (dt & 0x7f) * SUNXI_IR_SAMPLE;
+ ir_raw_event_store_with_filter(ir->rc, &rawir);
+ }
+ }
+
+ if (status & SUNXI_IR_RXINTS_RXOF)
+ ir_raw_event_reset(ir->rc);
+ else if (status & SUNXI_IR_RXINTS_RXPE) {
+ ir_raw_event_set_idle(ir->rc, true);
+ ir_raw_event_handle(ir->rc);
+ }
+
+ spin_unlock_irq(&ir->ir_lock);
+
+ return IRQ_HANDLED;
+}
+
+
+static int sunxi_ir_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ unsigned long tmp = 0;
+
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node;
+ struct resource *res;
+ struct sunxi_ir *ir;
+
+ ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
+ if (!ir)
+ return -ENOMEM;
+
+ /* Clock */
+ ir->apb_clk = devm_clk_get(dev, "apb");
+ if (IS_ERR(ir->apb_clk)) {
+ dev_err(dev, "failed to get a apb clock.\n");
+ return -EINVAL;
+ }
+ ir->clk = devm_clk_get(dev, "ir");
+ if (IS_ERR(ir->clk)) {
+ dev_err(dev, "failed to get a ir clock.\n");
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
+ if (ret) {
+ dev_err(dev, "set ir base clock failed!\n");
+ return -EINVAL;
+ }
+
+ if (clk_prepare_enable(ir->apb_clk)) {
+ dev_err(dev, "try to enable apb_ir_clk failed\n");
+ return -EINVAL;
+ }
+
+ if (clk_prepare_enable(ir->clk)) {
+ dev_err(dev, "try to enable ir_clk failed\n");
+ ret = -EINVAL;
+ goto exit_clkdisable_apb_clk;
+ }
+
+ /* IO */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ir->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ir->base)) {
+ dev_err(dev, "failed to map registers\n");
+ ret = -ENOMEM;
+ goto exit_clkdisable_clk;
+ }
+
+ /* IRQ */
+ ir->irq = platform_get_irq(pdev, 0);
+ if (ir->irq < 0) {
+ dev_err(dev, "no irq resource\n");
+ ret = -EINVAL;
+ goto exit_clkdisable_clk;
+ }
+
+ ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
+ if (ret) {
+ dev_err(dev, "failed request irq\n");
+ ret = -EINVAL;
+ goto exit_clkdisable_clk;
+ }
+
+ ir->rc = rc_allocate_device();
+
+ if (!ir->rc) {
+ dev_err(dev, "failed to allocate device\n");
+ ret = -ENOMEM;
+ goto exit_clkdisable_clk;
+ }
+
+ ir->rc->priv = ir;
+ ir->rc->input_name = SUNXI_IR_DEV;
+ ir->rc->input_phys = "sunxi-ir/input0";
+ ir->rc->input_id.bustype = BUS_HOST;
+ ir->rc->input_id.vendor = 0x0001;
+ ir->rc->input_id.product = 0x0001;
+ ir->rc->input_id.version = 0x0100;
+ ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
+ ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
+ ir->rc->dev.parent = dev;
+ ir->rc->driver_type = RC_DRIVER_IR_RAW;
+ rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
+ ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
+ ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
+ ir->rc->driver_name = SUNXI_IR_DEV;
+
+ ret = rc_register_device(ir->rc);
+ if (ret) {
+ dev_err(dev, "failed to register rc device\n");
+ ret = -EINVAL;
+ goto exit_free_dev;
+ }
+
+ platform_set_drvdata(pdev, ir);
+
+ /* Enable CIR Mode */
+ writel(0x3 << 4, ir->base+SUNXI_IR_CTL_REG);
+
+ /* Config IR Sample Register */
+ /* Fsample = clk */
+ tmp = 0;
+ /* Set Filter Threshold */
+ tmp |= (SUNXI_IR_RXFILT & 0x3f) << 2;
+ /* Set Idle Threshold */
+ tmp |= (SUNXI_IR_RXIDLE & 0xff) << 8;
+ writel(tmp, ir->base + SUNXI_IR_CIR_REG);
+
+ /* Invert Input Signal */
+ writel(0x1 << 2, ir->base + SUNXI_IR_RXCTL_REG);
+
+ /* Clear All Rx Interrupt Status */
+ writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
+
+ /* Enable IRQ on data, overflow, packed end */
+ tmp = (0x1 << 4) | 0x3;
+
+ /* Rx FIFO Threshold */
+ tmp |= (SUNXI_IR_FIFO_TRIG - 1) << 8;
+
+ writel(tmp, ir->base + SUNXI_IR_RXINT_REG);
+
+ /* Enable IR Module */
+ tmp = readl(ir->base + SUNXI_IR_CTL_REG);
+
+ writel(tmp | 0x3, ir->base + SUNXI_IR_CTL_REG);
+
+ dev_info(dev, "initialized sunXi IR driver\n");
+ return 0;
+
+exit_free_dev:
+ rc_free_device(ir->rc);
+exit_clkdisable_clk:
+ clk_disable_unprepare(ir->clk);
+exit_clkdisable_apb_clk:
+ clk_disable_unprepare(ir->apb_clk);
+
+ return ret;
+}
+
+static int sunxi_ir_remove(struct platform_device *pdev)
+{
+ unsigned long flags;
+ struct sunxi_ir *ir = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(ir->clk);
+ clk_disable_unprepare(ir->apb_clk);
+
+ spin_lock_irqsave(&ir->ir_lock, flags);
+ /* disable IR IRQ */
+ writel(0, ir->base + SUNXI_IR_RXINT_REG);
+ /* clear All Rx Interrupt Status */
+ writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
+ /* disable IR */
+ writel(0, ir->base + SUNXI_IR_CTL_REG);
+ spin_unlock_irqrestore(&ir->ir_lock, flags);
+
+ rc_unregister_device(ir->rc);
+ return 0;
+}
+
+static const struct of_device_id sunxi_ir_match[] = {
+ { .compatible = "allwinner,sun7i-a20-ir", },
+ {},
+};
+
+static struct platform_driver sunxi_ir_driver = {
+ .probe          = sunxi_ir_probe,
+ .remove         = sunxi_ir_remove,
+ .driver = {
+ .name = SUNXI_IR_DEV,
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_ir_match,
+ },
+};
+
+module_platform_driver(sunxi_ir_driver);
+
+MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
+MODULE_AUTHOR("Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>");
+MODULE_LICENSE("GPL");


среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев 
написал:
>
> This patch introduces Consumer IR(CIR) support for sunxi boards.
>
> This is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
>

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: Type: text/html, Size: 25606 bytes --]

Re: [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller

[Mauro Carvalho Chehab]

Em Wed, 30 Apr 2014 03:58:18 -0700 (PDT)
Александр Берсенев <bay@hackerdom.ru> escreveu:

> [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller
> 
> This patch adds driver for sunxi IR controller.
> It is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
> 
> Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
> 
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 8fbd377..9427fad 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -343,4 +343,14 @@ config RC_ST
>  
>   If you're not sure, select N here.
>  
> +config IR_SUNXI
> +    tristate "SUNXI IR remote control"
> +    depends on RC_CORE
> +    depends on ARCH_SUNXI
> +    ---help---
> +      Say Y if you want to use sunXi internal IR Controller
> +
> +      To compile this driver as a module, choose M here: the module will
> +      be called sunxi-ir.
> +
>  endif #RC_DEVICES
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index f8b54ff..93cdbe9 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
>  obj-$(CONFIG_IR_IGUANA) += iguanair.o
>  obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
>  obj-$(CONFIG_RC_ST) += st_rc.o
> +obj-$(CONFIG_IR_SUNXI) += sunxi-ir.o
>  obj-$(CONFIG_IR_IMG) += img-ir/
> diff --git a/drivers/media/rc/sunxi-ir.c b/drivers/media/rc/sunxi-ir.c
> new file mode 100644
> index 0000000..f051d94
> --- /dev/null
> +++ b/drivers/media/rc/sunxi-ir.c
> @@ -0,0 +1,303 @@
> +/*
> + * Driver for Allwinner sunXi IR controller
> + *
> + * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
> + * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
> + *
> + * Based on sun5i-ir.c:
> + * Copyright (C) 2007-2012 Daniel Wang
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <media/rc-core.h>
> +
> +#define SUNXI_IR_DEV "sunxi-ir"
> +
> +/* Registers */
> +/* IR Control */
> +#define SUNXI_IR_CTL_REG      0x00
> +/* Rx Config */
> +#define SUNXI_IR_RXCTL_REG    0x10
> +/* Rx Data */
> +#define SUNXI_IR_RXFIFO_REG   0x20
> +/* Rx Interrupt Enable */
> +#define SUNXI_IR_RXINT_REG    0x2C
> +/* Rx Interrupt Status */
> +#define SUNXI_IR_RXSTA_REG    0x30
> +/* IR Sample Config */
> +#define SUNXI_IR_CIR_REG      0x34
> +
> +/* Bit Definition of IR_RXINTS_REG Register */
> +#define SUNXI_IR_RXINTS_RXOF  BIT(0) /* Rx FIFO Overflow */
> +#define SUNXI_IR_RXINTS_RXPE  BIT(1) /* Rx Packet End */
> +#define SUNXI_IR_RXINTS_RXDA  BIT(4) /* Rx FIFO Data Available */
> +/* Hardware supported fifo size */
> +#define SUNXI_IR_FIFO_SIZE    16
> +/* How much messages in fifo triggers IRQ */
> +#define SUNXI_IR_FIFO_TRIG    8
> +/* Required frequency for IR0 or IR1 clock in CIR mode */
> +#define SUNXI_IR_BASE_CLK     8000000
> +/* Frequency after IR internal divider  */
> +#define SUNXI_IR_CLK          (SUNXI_IR_BASE_CLK / 64)
> +/* Sample period in ns */
> +#define SUNXI_IR_SAMPLE       (1000000000ul / SUNXI_IR_CLK)
> +/* Filter threshold in samples  */
> +#define SUNXI_IR_RXFILT       1
> +/* Idle Threshold in samples */
> +#define SUNXI_IR_RXIDLE       20
> +/* Time after which device stops sending data in ms */
> +#define SUNXI_IR_TIMEOUT      120
> +
> +struct sunxi_ir {
> + spinlock_t      ir_lock;
> + struct rc_dev   *rc;
> + void __iomem    *base;
> + int             irq;
> + struct clk      *clk;
> + struct clk      *apb_clk;
> + const char      *map_name;
> +};

Still badly indented. Maybe your emailer is mangling whitespaces.

The best is to use git send-email to send the patches.

Also, please c/c linux-media ML for the entire patch series, as, in general,
we generally merge all patches via one tree (typically, the tree to where the
real driver will be merged - in this case, the media tree), after getting
the needed acks from DT and arm subarch maintainers (when applicable).

I'll do a better review after the whitespace fixups.

Regards,
Mauro

> +
> +static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
> +{
> + unsigned long status;
> + unsigned char dt;
> + unsigned int cnt, rc;
> + struct sunxi_ir *ir = dev_id;
> + DEFINE_IR_RAW_EVENT(rawir);
> +
> + spin_lock_irq(&ir->ir_lock);
> +
> + status = readl(ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* clean all pending statuses */
> + writel(status | 0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + if (status & SUNXI_IR_RXINTS_RXDA) {
> + /* How much messages in fifo */
> + rc  = (status >> 8) & 0x3f;
> + /* Sanity check */
> + rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
> + /* if we have data */
> + for (cnt = 0; cnt < rc; cnt++) {
> + /* for each bit in fifo */
> + dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
> + rawir.pulse = (dt & 0x80) != 0;
> + rawir.duration = (dt & 0x7f) * SUNXI_IR_SAMPLE;
> + ir_raw_event_store_with_filter(ir->rc, &rawir);
> + }
> + }
> +
> + if (status & SUNXI_IR_RXINTS_RXOF)
> + ir_raw_event_reset(ir->rc);
> + else if (status & SUNXI_IR_RXINTS_RXPE) {
> + ir_raw_event_set_idle(ir->rc, true);
> + ir_raw_event_handle(ir->rc);
> + }
> +
> + spin_unlock_irq(&ir->ir_lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int sunxi_ir_probe(struct platform_device *pdev)
> +{
> + int ret = 0;
> + unsigned long tmp = 0;
> +
> + struct device *dev = &pdev->dev;
> + struct device_node *dn = dev->of_node;
> + struct resource *res;
> + struct sunxi_ir *ir;
> +
> + ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + /* Clock */
> + ir->apb_clk = devm_clk_get(dev, "apb");
> + if (IS_ERR(ir->apb_clk)) {
> + dev_err(dev, "failed to get a apb clock.\n");
> + return -EINVAL;
> + }
> + ir->clk = devm_clk_get(dev, "ir");
> + if (IS_ERR(ir->clk)) {
> + dev_err(dev, "failed to get a ir clock.\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
> + if (ret) {
> + dev_err(dev, "set ir base clock failed!\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->apb_clk)) {
> + dev_err(dev, "try to enable apb_ir_clk failed\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->clk)) {
> + dev_err(dev, "try to enable ir_clk failed\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_apb_clk;
> + }
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + ir->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ir->base)) {
> + dev_err(dev, "failed to map registers\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + /* IRQ */
> + ir->irq = platform_get_irq(pdev, 0);
> + if (ir->irq < 0) {
> + dev_err(dev, "no irq resource\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
> + if (ret) {
> + dev_err(dev, "failed request irq\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc = rc_allocate_device();
> +
> + if (!ir->rc) {
> + dev_err(dev, "failed to allocate device\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc->priv = ir;
> + ir->rc->input_name = SUNXI_IR_DEV;
> + ir->rc->input_phys = "sunxi-ir/input0";
> + ir->rc->input_id.bustype = BUS_HOST;
> + ir->rc->input_id.vendor = 0x0001;
> + ir->rc->input_id.product = 0x0001;
> + ir->rc->input_id.version = 0x0100;
> + ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
> + ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
> + ir->rc->dev.parent = dev;
> + ir->rc->driver_type = RC_DRIVER_IR_RAW;
> + rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
> + ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
> + ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
> + ir->rc->driver_name = SUNXI_IR_DEV;
> +
> + ret = rc_register_device(ir->rc);
> + if (ret) {
> + dev_err(dev, "failed to register rc device\n");
> + ret = -EINVAL;
> + goto exit_free_dev;
> + }
> +
> + platform_set_drvdata(pdev, ir);
> +
> + /* Enable CIR Mode */
> + writel(0x3 << 4, ir->base+SUNXI_IR_CTL_REG);
> +
> + /* Config IR Sample Register */
> + /* Fsample = clk */
> + tmp = 0;
> + /* Set Filter Threshold */
> + tmp |= (SUNXI_IR_RXFILT & 0x3f) << 2;
> + /* Set Idle Threshold */
> + tmp |= (SUNXI_IR_RXIDLE & 0xff) << 8;
> + writel(tmp, ir->base + SUNXI_IR_CIR_REG);
> +
> + /* Invert Input Signal */
> + writel(0x1 << 2, ir->base + SUNXI_IR_RXCTL_REG);
> +
> + /* Clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* Enable IRQ on data, overflow, packed end */
> + tmp = (0x1 << 4) | 0x3;
> +
> + /* Rx FIFO Threshold */
> + tmp |= (SUNXI_IR_FIFO_TRIG - 1) << 8;
> +
> + writel(tmp, ir->base + SUNXI_IR_RXINT_REG);
> +
> + /* Enable IR Module */
> + tmp = readl(ir->base + SUNXI_IR_CTL_REG);
> +
> + writel(tmp | 0x3, ir->base + SUNXI_IR_CTL_REG);
> +
> + dev_info(dev, "initialized sunXi IR driver\n");
> + return 0;
> +
> +exit_free_dev:
> + rc_free_device(ir->rc);
> +exit_clkdisable_clk:
> + clk_disable_unprepare(ir->clk);
> +exit_clkdisable_apb_clk:
> + clk_disable_unprepare(ir->apb_clk);
> +
> + return ret;
> +}
> +
> +static int sunxi_ir_remove(struct platform_device *pdev)
> +{
> + unsigned long flags;
> + struct sunxi_ir *ir = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(ir->clk);
> + clk_disable_unprepare(ir->apb_clk);
> +
> + spin_lock_irqsave(&ir->ir_lock, flags);
> + /* disable IR IRQ */
> + writel(0, ir->base + SUNXI_IR_RXINT_REG);
> + /* clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> + /* disable IR */
> + writel(0, ir->base + SUNXI_IR_CTL_REG);
> + spin_unlock_irqrestore(&ir->ir_lock, flags);
> +
> + rc_unregister_device(ir->rc);
> + return 0;
> +}
> +
> +static const struct of_device_id sunxi_ir_match[] = {
> + { .compatible = "allwinner,sun7i-a20-ir", },
> + {},
> +};
> +
> +static struct platform_driver sunxi_ir_driver = {
> + .probe          = sunxi_ir_probe,
> + .remove         = sunxi_ir_remove,
> + .driver = {
> + .name = SUNXI_IR_DEV,
> + .owner = THIS_MODULE,
> + .of_match_table = sunxi_ir_match,
> + },
> +};
> +
> +module_platform_driver(sunxi_ir_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
> +MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
> +MODULE_LICENSE("GPL");
> 
> 
> среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев 
> написал:
> >
> > This patch introduces Consumer IR(CIR) support for sunxi boards.
> >
> > This is based on Alexsey Shestacov's work based on the original driver 
> > supplied by Allwinner.
> >


-- 

Cheers,
Mauro

[PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller

[Mauro Carvalho Chehab]

Em Wed, 30 Apr 2014 03:58:18 -0700 (PDT)
????????? ???????? <bay@hackerdom.ru> escreveu:

> [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller
> 
> This patch adds driver for sunxi IR controller.
> It is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
> 
> Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
> 
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 8fbd377..9427fad 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -343,4 +343,14 @@ config RC_ST
>  
>   If you're not sure, select N here.
>  
> +config IR_SUNXI
> +    tristate "SUNXI IR remote control"
> +    depends on RC_CORE
> +    depends on ARCH_SUNXI
> +    ---help---
> +      Say Y if you want to use sunXi internal IR Controller
> +
> +      To compile this driver as a module, choose M here: the module will
> +      be called sunxi-ir.
> +
>  endif #RC_DEVICES
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index f8b54ff..93cdbe9 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
>  obj-$(CONFIG_IR_IGUANA) += iguanair.o
>  obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
>  obj-$(CONFIG_RC_ST) += st_rc.o
> +obj-$(CONFIG_IR_SUNXI) += sunxi-ir.o
>  obj-$(CONFIG_IR_IMG) += img-ir/
> diff --git a/drivers/media/rc/sunxi-ir.c b/drivers/media/rc/sunxi-ir.c
> new file mode 100644
> index 0000000..f051d94
> --- /dev/null
> +++ b/drivers/media/rc/sunxi-ir.c
> @@ -0,0 +1,303 @@
> +/*
> + * Driver for Allwinner sunXi IR controller
> + *
> + * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
> + * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
> + *
> + * Based on sun5i-ir.c:
> + * Copyright (C) 2007-2012 Daniel Wang
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <media/rc-core.h>
> +
> +#define SUNXI_IR_DEV "sunxi-ir"
> +
> +/* Registers */
> +/* IR Control */
> +#define SUNXI_IR_CTL_REG      0x00
> +/* Rx Config */
> +#define SUNXI_IR_RXCTL_REG    0x10
> +/* Rx Data */
> +#define SUNXI_IR_RXFIFO_REG   0x20
> +/* Rx Interrupt Enable */
> +#define SUNXI_IR_RXINT_REG    0x2C
> +/* Rx Interrupt Status */
> +#define SUNXI_IR_RXSTA_REG    0x30
> +/* IR Sample Config */
> +#define SUNXI_IR_CIR_REG      0x34
> +
> +/* Bit Definition of IR_RXINTS_REG Register */
> +#define SUNXI_IR_RXINTS_RXOF  BIT(0) /* Rx FIFO Overflow */
> +#define SUNXI_IR_RXINTS_RXPE  BIT(1) /* Rx Packet End */
> +#define SUNXI_IR_RXINTS_RXDA  BIT(4) /* Rx FIFO Data Available */
> +/* Hardware supported fifo size */
> +#define SUNXI_IR_FIFO_SIZE    16
> +/* How much messages in fifo triggers IRQ */
> +#define SUNXI_IR_FIFO_TRIG    8
> +/* Required frequency for IR0 or IR1 clock in CIR mode */
> +#define SUNXI_IR_BASE_CLK     8000000
> +/* Frequency after IR internal divider  */
> +#define SUNXI_IR_CLK          (SUNXI_IR_BASE_CLK / 64)
> +/* Sample period in ns */
> +#define SUNXI_IR_SAMPLE       (1000000000ul / SUNXI_IR_CLK)
> +/* Filter threshold in samples  */
> +#define SUNXI_IR_RXFILT       1
> +/* Idle Threshold in samples */
> +#define SUNXI_IR_RXIDLE       20
> +/* Time after which device stops sending data in ms */
> +#define SUNXI_IR_TIMEOUT      120
> +
> +struct sunxi_ir {
> + spinlock_t      ir_lock;
> + struct rc_dev   *rc;
> + void __iomem    *base;
> + int             irq;
> + struct clk      *clk;
> + struct clk      *apb_clk;
> + const char      *map_name;
> +};

Still badly indented. Maybe your emailer is mangling whitespaces.

The best is to use git send-email to send the patches.

Also, please c/c linux-media ML for the entire patch series, as, in general,
we generally merge all patches via one tree (typically, the tree to where the
real driver will be merged - in this case, the media tree), after getting
the needed acks from DT and arm subarch maintainers (when applicable).

I'll do a better review after the whitespace fixups.

Regards,
Mauro

> +
> +static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
> +{
> + unsigned long status;
> + unsigned char dt;
> + unsigned int cnt, rc;
> + struct sunxi_ir *ir = dev_id;
> + DEFINE_IR_RAW_EVENT(rawir);
> +
> + spin_lock_irq(&ir->ir_lock);
> +
> + status = readl(ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* clean all pending statuses */
> + writel(status | 0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + if (status & SUNXI_IR_RXINTS_RXDA) {
> + /* How much messages in fifo */
> + rc  = (status >> 8) & 0x3f;
> + /* Sanity check */
> + rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
> + /* if we have data */
> + for (cnt = 0; cnt < rc; cnt++) {
> + /* for each bit in fifo */
> + dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
> + rawir.pulse = (dt & 0x80) != 0;
> + rawir.duration = (dt & 0x7f) * SUNXI_IR_SAMPLE;
> + ir_raw_event_store_with_filter(ir->rc, &rawir);
> + }
> + }
> +
> + if (status & SUNXI_IR_RXINTS_RXOF)
> + ir_raw_event_reset(ir->rc);
> + else if (status & SUNXI_IR_RXINTS_RXPE) {
> + ir_raw_event_set_idle(ir->rc, true);
> + ir_raw_event_handle(ir->rc);
> + }
> +
> + spin_unlock_irq(&ir->ir_lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int sunxi_ir_probe(struct platform_device *pdev)
> +{
> + int ret = 0;
> + unsigned long tmp = 0;
> +
> + struct device *dev = &pdev->dev;
> + struct device_node *dn = dev->of_node;
> + struct resource *res;
> + struct sunxi_ir *ir;
> +
> + ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + /* Clock */
> + ir->apb_clk = devm_clk_get(dev, "apb");
> + if (IS_ERR(ir->apb_clk)) {
> + dev_err(dev, "failed to get a apb clock.\n");
> + return -EINVAL;
> + }
> + ir->clk = devm_clk_get(dev, "ir");
> + if (IS_ERR(ir->clk)) {
> + dev_err(dev, "failed to get a ir clock.\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
> + if (ret) {
> + dev_err(dev, "set ir base clock failed!\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->apb_clk)) {
> + dev_err(dev, "try to enable apb_ir_clk failed\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->clk)) {
> + dev_err(dev, "try to enable ir_clk failed\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_apb_clk;
> + }
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + ir->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ir->base)) {
> + dev_err(dev, "failed to map registers\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + /* IRQ */
> + ir->irq = platform_get_irq(pdev, 0);
> + if (ir->irq < 0) {
> + dev_err(dev, "no irq resource\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
> + if (ret) {
> + dev_err(dev, "failed request irq\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc = rc_allocate_device();
> +
> + if (!ir->rc) {
> + dev_err(dev, "failed to allocate device\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc->priv = ir;
> + ir->rc->input_name = SUNXI_IR_DEV;
> + ir->rc->input_phys = "sunxi-ir/input0";
> + ir->rc->input_id.bustype = BUS_HOST;
> + ir->rc->input_id.vendor = 0x0001;
> + ir->rc->input_id.product = 0x0001;
> + ir->rc->input_id.version = 0x0100;
> + ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
> + ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
> + ir->rc->dev.parent = dev;
> + ir->rc->driver_type = RC_DRIVER_IR_RAW;
> + rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
> + ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
> + ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
> + ir->rc->driver_name = SUNXI_IR_DEV;
> +
> + ret = rc_register_device(ir->rc);
> + if (ret) {
> + dev_err(dev, "failed to register rc device\n");
> + ret = -EINVAL;
> + goto exit_free_dev;
> + }
> +
> + platform_set_drvdata(pdev, ir);
> +
> + /* Enable CIR Mode */
> + writel(0x3 << 4, ir->base+SUNXI_IR_CTL_REG);
> +
> + /* Config IR Sample Register */
> + /* Fsample = clk */
> + tmp = 0;
> + /* Set Filter Threshold */
> + tmp |= (SUNXI_IR_RXFILT & 0x3f) << 2;
> + /* Set Idle Threshold */
> + tmp |= (SUNXI_IR_RXIDLE & 0xff) << 8;
> + writel(tmp, ir->base + SUNXI_IR_CIR_REG);
> +
> + /* Invert Input Signal */
> + writel(0x1 << 2, ir->base + SUNXI_IR_RXCTL_REG);
> +
> + /* Clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* Enable IRQ on data, overflow, packed end */
> + tmp = (0x1 << 4) | 0x3;
> +
> + /* Rx FIFO Threshold */
> + tmp |= (SUNXI_IR_FIFO_TRIG - 1) << 8;
> +
> + writel(tmp, ir->base + SUNXI_IR_RXINT_REG);
> +
> + /* Enable IR Module */
> + tmp = readl(ir->base + SUNXI_IR_CTL_REG);
> +
> + writel(tmp | 0x3, ir->base + SUNXI_IR_CTL_REG);
> +
> + dev_info(dev, "initialized sunXi IR driver\n");
> + return 0;
> +
> +exit_free_dev:
> + rc_free_device(ir->rc);
> +exit_clkdisable_clk:
> + clk_disable_unprepare(ir->clk);
> +exit_clkdisable_apb_clk:
> + clk_disable_unprepare(ir->apb_clk);
> +
> + return ret;
> +}
> +
> +static int sunxi_ir_remove(struct platform_device *pdev)
> +{
> + unsigned long flags;
> + struct sunxi_ir *ir = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(ir->clk);
> + clk_disable_unprepare(ir->apb_clk);
> +
> + spin_lock_irqsave(&ir->ir_lock, flags);
> + /* disable IR IRQ */
> + writel(0, ir->base + SUNXI_IR_RXINT_REG);
> + /* clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> + /* disable IR */
> + writel(0, ir->base + SUNXI_IR_CTL_REG);
> + spin_unlock_irqrestore(&ir->ir_lock, flags);
> +
> + rc_unregister_device(ir->rc);
> + return 0;
> +}
> +
> +static const struct of_device_id sunxi_ir_match[] = {
> + { .compatible = "allwinner,sun7i-a20-ir", },
> + {},
> +};
> +
> +static struct platform_driver sunxi_ir_driver = {
> + .probe          = sunxi_ir_probe,
> + .remove         = sunxi_ir_remove,
> + .driver = {
> + .name = SUNXI_IR_DEV,
> + .owner = THIS_MODULE,
> + .of_match_table = sunxi_ir_match,
> + },
> +};
> +
> +module_platform_driver(sunxi_ir_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
> +MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
> +MODULE_LICENSE("GPL");
> 
> 
> ?????, 30 ?????? 2014 ?., 16:51:12 UTC+6 ???????????? ????????? ???????? 
> ???????:
> >
> > This patch introduces Consumer IR(CIR) support for sunxi boards.
> >
> > This is based on Alexsey Shestacov's work based on the original driver 
> > supplied by Allwinner.
> >


-- 

Cheers,
Mauro

Re: [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller

[Mauro Carvalho Chehab]

Em Wed, 30 Apr 2014 03:58:18 -0700 (PDT)
Александр Берсенев <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org> escreveu:

> [PATCH v4 02/03] ARM: sunxi: Add driver for sunxi IR controller
> 
> This patch adds driver for sunxi IR controller.
> It is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
> 
> Signed-off-by: Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
> Signed-off-by: Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>
> 
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 8fbd377..9427fad 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -343,4 +343,14 @@ config RC_ST
>  
>   If you're not sure, select N here.
>  
> +config IR_SUNXI
> +    tristate "SUNXI IR remote control"
> +    depends on RC_CORE
> +    depends on ARCH_SUNXI
> +    ---help---
> +      Say Y if you want to use sunXi internal IR Controller
> +
> +      To compile this driver as a module, choose M here: the module will
> +      be called sunxi-ir.
> +
>  endif #RC_DEVICES
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index f8b54ff..93cdbe9 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
>  obj-$(CONFIG_IR_IGUANA) += iguanair.o
>  obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
>  obj-$(CONFIG_RC_ST) += st_rc.o
> +obj-$(CONFIG_IR_SUNXI) += sunxi-ir.o
>  obj-$(CONFIG_IR_IMG) += img-ir/
> diff --git a/drivers/media/rc/sunxi-ir.c b/drivers/media/rc/sunxi-ir.c
> new file mode 100644
> index 0000000..f051d94
> --- /dev/null
> +++ b/drivers/media/rc/sunxi-ir.c
> @@ -0,0 +1,303 @@
> +/*
> + * Driver for Allwinner sunXi IR controller
> + *
> + * Copyright (C) 2014 Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>
> + * Copyright (C) 2014 Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
> + *
> + * Based on sun5i-ir.c:
> + * Copyright (C) 2007-2012 Daniel Wang
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <media/rc-core.h>
> +
> +#define SUNXI_IR_DEV "sunxi-ir"
> +
> +/* Registers */
> +/* IR Control */
> +#define SUNXI_IR_CTL_REG      0x00
> +/* Rx Config */
> +#define SUNXI_IR_RXCTL_REG    0x10
> +/* Rx Data */
> +#define SUNXI_IR_RXFIFO_REG   0x20
> +/* Rx Interrupt Enable */
> +#define SUNXI_IR_RXINT_REG    0x2C
> +/* Rx Interrupt Status */
> +#define SUNXI_IR_RXSTA_REG    0x30
> +/* IR Sample Config */
> +#define SUNXI_IR_CIR_REG      0x34
> +
> +/* Bit Definition of IR_RXINTS_REG Register */
> +#define SUNXI_IR_RXINTS_RXOF  BIT(0) /* Rx FIFO Overflow */
> +#define SUNXI_IR_RXINTS_RXPE  BIT(1) /* Rx Packet End */
> +#define SUNXI_IR_RXINTS_RXDA  BIT(4) /* Rx FIFO Data Available */
> +/* Hardware supported fifo size */
> +#define SUNXI_IR_FIFO_SIZE    16
> +/* How much messages in fifo triggers IRQ */
> +#define SUNXI_IR_FIFO_TRIG    8
> +/* Required frequency for IR0 or IR1 clock in CIR mode */
> +#define SUNXI_IR_BASE_CLK     8000000
> +/* Frequency after IR internal divider  */
> +#define SUNXI_IR_CLK          (SUNXI_IR_BASE_CLK / 64)
> +/* Sample period in ns */
> +#define SUNXI_IR_SAMPLE       (1000000000ul / SUNXI_IR_CLK)
> +/* Filter threshold in samples  */
> +#define SUNXI_IR_RXFILT       1
> +/* Idle Threshold in samples */
> +#define SUNXI_IR_RXIDLE       20
> +/* Time after which device stops sending data in ms */
> +#define SUNXI_IR_TIMEOUT      120
> +
> +struct sunxi_ir {
> + spinlock_t      ir_lock;
> + struct rc_dev   *rc;
> + void __iomem    *base;
> + int             irq;
> + struct clk      *clk;
> + struct clk      *apb_clk;
> + const char      *map_name;
> +};

Still badly indented. Maybe your emailer is mangling whitespaces.

The best is to use git send-email to send the patches.

Also, please c/c linux-media ML for the entire patch series, as, in general,
we generally merge all patches via one tree (typically, the tree to where the
real driver will be merged - in this case, the media tree), after getting
the needed acks from DT and arm subarch maintainers (when applicable).

I'll do a better review after the whitespace fixups.

Regards,
Mauro

> +
> +static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
> +{
> + unsigned long status;
> + unsigned char dt;
> + unsigned int cnt, rc;
> + struct sunxi_ir *ir = dev_id;
> + DEFINE_IR_RAW_EVENT(rawir);
> +
> + spin_lock_irq(&ir->ir_lock);
> +
> + status = readl(ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* clean all pending statuses */
> + writel(status | 0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + if (status & SUNXI_IR_RXINTS_RXDA) {
> + /* How much messages in fifo */
> + rc  = (status >> 8) & 0x3f;
> + /* Sanity check */
> + rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
> + /* if we have data */
> + for (cnt = 0; cnt < rc; cnt++) {
> + /* for each bit in fifo */
> + dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
> + rawir.pulse = (dt & 0x80) != 0;
> + rawir.duration = (dt & 0x7f) * SUNXI_IR_SAMPLE;
> + ir_raw_event_store_with_filter(ir->rc, &rawir);
> + }
> + }
> +
> + if (status & SUNXI_IR_RXINTS_RXOF)
> + ir_raw_event_reset(ir->rc);
> + else if (status & SUNXI_IR_RXINTS_RXPE) {
> + ir_raw_event_set_idle(ir->rc, true);
> + ir_raw_event_handle(ir->rc);
> + }
> +
> + spin_unlock_irq(&ir->ir_lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int sunxi_ir_probe(struct platform_device *pdev)
> +{
> + int ret = 0;
> + unsigned long tmp = 0;
> +
> + struct device *dev = &pdev->dev;
> + struct device_node *dn = dev->of_node;
> + struct resource *res;
> + struct sunxi_ir *ir;
> +
> + ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + /* Clock */
> + ir->apb_clk = devm_clk_get(dev, "apb");
> + if (IS_ERR(ir->apb_clk)) {
> + dev_err(dev, "failed to get a apb clock.\n");
> + return -EINVAL;
> + }
> + ir->clk = devm_clk_get(dev, "ir");
> + if (IS_ERR(ir->clk)) {
> + dev_err(dev, "failed to get a ir clock.\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
> + if (ret) {
> + dev_err(dev, "set ir base clock failed!\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->apb_clk)) {
> + dev_err(dev, "try to enable apb_ir_clk failed\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->clk)) {
> + dev_err(dev, "try to enable ir_clk failed\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_apb_clk;
> + }
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + ir->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ir->base)) {
> + dev_err(dev, "failed to map registers\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + /* IRQ */
> + ir->irq = platform_get_irq(pdev, 0);
> + if (ir->irq < 0) {
> + dev_err(dev, "no irq resource\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
> + if (ret) {
> + dev_err(dev, "failed request irq\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc = rc_allocate_device();
> +
> + if (!ir->rc) {
> + dev_err(dev, "failed to allocate device\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc->priv = ir;
> + ir->rc->input_name = SUNXI_IR_DEV;
> + ir->rc->input_phys = "sunxi-ir/input0";
> + ir->rc->input_id.bustype = BUS_HOST;
> + ir->rc->input_id.vendor = 0x0001;
> + ir->rc->input_id.product = 0x0001;
> + ir->rc->input_id.version = 0x0100;
> + ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
> + ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
> + ir->rc->dev.parent = dev;
> + ir->rc->driver_type = RC_DRIVER_IR_RAW;
> + rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
> + ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
> + ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
> + ir->rc->driver_name = SUNXI_IR_DEV;
> +
> + ret = rc_register_device(ir->rc);
> + if (ret) {
> + dev_err(dev, "failed to register rc device\n");
> + ret = -EINVAL;
> + goto exit_free_dev;
> + }
> +
> + platform_set_drvdata(pdev, ir);
> +
> + /* Enable CIR Mode */
> + writel(0x3 << 4, ir->base+SUNXI_IR_CTL_REG);
> +
> + /* Config IR Sample Register */
> + /* Fsample = clk */
> + tmp = 0;
> + /* Set Filter Threshold */
> + tmp |= (SUNXI_IR_RXFILT & 0x3f) << 2;
> + /* Set Idle Threshold */
> + tmp |= (SUNXI_IR_RXIDLE & 0xff) << 8;
> + writel(tmp, ir->base + SUNXI_IR_CIR_REG);
> +
> + /* Invert Input Signal */
> + writel(0x1 << 2, ir->base + SUNXI_IR_RXCTL_REG);
> +
> + /* Clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> +
> + /* Enable IRQ on data, overflow, packed end */
> + tmp = (0x1 << 4) | 0x3;
> +
> + /* Rx FIFO Threshold */
> + tmp |= (SUNXI_IR_FIFO_TRIG - 1) << 8;
> +
> + writel(tmp, ir->base + SUNXI_IR_RXINT_REG);
> +
> + /* Enable IR Module */
> + tmp = readl(ir->base + SUNXI_IR_CTL_REG);
> +
> + writel(tmp | 0x3, ir->base + SUNXI_IR_CTL_REG);
> +
> + dev_info(dev, "initialized sunXi IR driver\n");
> + return 0;
> +
> +exit_free_dev:
> + rc_free_device(ir->rc);
> +exit_clkdisable_clk:
> + clk_disable_unprepare(ir->clk);
> +exit_clkdisable_apb_clk:
> + clk_disable_unprepare(ir->apb_clk);
> +
> + return ret;
> +}
> +
> +static int sunxi_ir_remove(struct platform_device *pdev)
> +{
> + unsigned long flags;
> + struct sunxi_ir *ir = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(ir->clk);
> + clk_disable_unprepare(ir->apb_clk);
> +
> + spin_lock_irqsave(&ir->ir_lock, flags);
> + /* disable IR IRQ */
> + writel(0, ir->base + SUNXI_IR_RXINT_REG);
> + /* clear All Rx Interrupt Status */
> + writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
> + /* disable IR */
> + writel(0, ir->base + SUNXI_IR_CTL_REG);
> + spin_unlock_irqrestore(&ir->ir_lock, flags);
> +
> + rc_unregister_device(ir->rc);
> + return 0;
> +}
> +
> +static const struct of_device_id sunxi_ir_match[] = {
> + { .compatible = "allwinner,sun7i-a20-ir", },
> + {},
> +};
> +
> +static struct platform_driver sunxi_ir_driver = {
> + .probe          = sunxi_ir_probe,
> + .remove         = sunxi_ir_remove,
> + .driver = {
> + .name = SUNXI_IR_DEV,
> + .owner = THIS_MODULE,
> + .of_match_table = sunxi_ir_match,
> + },
> +};
> +
> +module_platform_driver(sunxi_ir_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
> +MODULE_AUTHOR("Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>");
> +MODULE_LICENSE("GPL");
> 
> 
> среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев 
> написал:
> >
> > This patch introduces Consumer IR(CIR) support for sunxi boards.
> >
> > This is based on Alexsey Shestacov's work based on the original driver 
> > supplied by Allwinner.
> >


-- 

Cheers,
Mauro

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH v4 03/03] ARM: sunxi: Add IR controller support in DT on A20

[Александр Берсенев]

[-- Attachment #1: Type: text/plain, Size: 3035 bytes --]

This patch adds IR controller in A20 Device-Tree:
- Two IR devices found in A20 user manual
- Pins for two devices
- One IR device physically found on Cubieboard 2 
- One IR device physically found on Cubietruck 

Signed-off-by: Alexander Bersenev <bay-d8LqKIyZzER6k2ZkT/Rh8A@public.gmane.org>
Signed-off-by: Alexsey Shestacov <wingrime-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts 
b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index feeff64..2564e8c 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -164,6 +164,12 @@
  reg = <1>;
  };
  };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
  };
 
  leds {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts 
b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index e288562..e375e89 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -232,6 +232,12 @@
  reg = <1>;
  };
  };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
  };
 
  leds {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi 
b/arch/arm/boot/dts/sun7i-a20.dtsi
index 0ae2b77..bb655a5 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -724,6 +724,19 @@
  allwinner,drive = <2>;
  allwinner,pull = <0>;
  };
+
+ ir0_pins_a: ir0@0 {
+    allwinner,pins = "PB3","PB4";
+    allwinner,function = "ir0";
+    allwinner,drive = <0>;
+    allwinner,pull = <0>;
+ };
+ ir1_pins_a: ir1@0 {
+    allwinner,pins = "PB22","PB23";
+    allwinner,function = "ir1";
+    allwinner,drive = <0>;
+    allwinner,pull = <0>;
+ };
  };
 
  timer@01c20c00 {
@@ -937,5 +950,23 @@
  #interrupt-cells = <3>;
  interrupts = <1 9 0xf04>;
  };
+
+       ir0: ir@01c21800 {
+     compatible = "allwinner,sun7i-a20-ir";
+ clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 5 4>;
+ reg = <0x01c21800 0x40>;
+ status = "disabled";
+ };
+
+       ir1: ir@01c21c00 {
+     compatible = "allwinner,sun7i-a20-ir";
+ clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 6 4>;
+ reg = <0x01C21c00 0x40>;
+ status = "disabled";
+ };
  };
 };


среда, 30 апреля 2014 г., 16:51:12 UTC+6 пользователь Александр Берсенев 
написал:
>
> This patch introduces Consumer IR(CIR) support for sunxi boards.
>
> This is based on Alexsey Shestacov's work based on the original driver 
> supplied by Allwinner.
>
>

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: Type: text/html, Size: 8325 bytes --]