* [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
@ 2022-04-21 1:39 Zheyu Ma
2022-04-21 23:47 ` Damien Le Moal
0 siblings, 1 reply; 5+ messages in thread
From: Zheyu Ma @ 2022-04-21 1:39 UTC (permalink / raw)
To: s.shtylyov, damien.lemoal; +Cc: linux-ide, linux-kernel, Zheyu Ma
Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:
[ 5.146634] Bad IO access at port 0x1 (return inb(port))
[ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[ 5.150856] RIP: 0010:ioread8+0x4a/0x60
[ 5.160238] Call Trace:
[ 5.160470] <TASK>
[ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[ 5.161728] ata_eh_recover+0x3520/0x6cc0
[ 5.168075] ata_do_eh+0x49/0x3c0
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---Changes in v2:
- Delete the useless 'else'
---
drivers/ata/pata_marvell.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 0c5a51970fbf..014ccb0f45dc 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -77,6 +77,8 @@ static int marvell_cable_detect(struct ata_port *ap)
switch(ap->port_no)
{
case 0:
+ if (!ap->ioaddr.bmdma_addr)
+ return ATA_CBL_PATA_UNK;
if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
2022-04-21 1:39 [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading Zheyu Ma
@ 2022-04-21 23:47 ` Damien Le Moal
2022-04-22 1:50 ` Zheyu Ma
2022-04-25 0:38 ` Damien Le Moal
0 siblings, 2 replies; 5+ messages in thread
From: Damien Le Moal @ 2022-04-21 23:47 UTC (permalink / raw)
To: Zheyu Ma, s.shtylyov; +Cc: linux-ide, linux-kernel
On 4/21/22 10:39, Zheyu Ma wrote:
> Before detecting the cable type on the dma bar, the driver should check
> whether the 'bmdma_addr' is zero, which means the adapter does not
> support DMA, otherwise we will get the following error:
>
> [ 5.146634] Bad IO access at port 0x1 (return inb(port))
> [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
> [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
> [ 5.160238] Call Trace:
> [ 5.160470] <TASK>
> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
> [ 5.161728] ata_eh_recover+0x3520/0x6cc0
> [ 5.168075] ata_do_eh+0x49/0x3c0
>
> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
> ---Changes in v2:
> - Delete the useless 'else'
Note for future contributions: The change log should be placed *after*
the "---" that comes before the "diff" line below. Otherwise, the change
log pollutes the commit message.
I fixed that and applied to for-5.18-fixes. Thanks.
> ---
> drivers/ata/pata_marvell.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
> index 0c5a51970fbf..014ccb0f45dc 100644
> --- a/drivers/ata/pata_marvell.c
> +++ b/drivers/ata/pata_marvell.c
> @@ -77,6 +77,8 @@ static int marvell_cable_detect(struct ata_port *ap)
> switch(ap->port_no)
> {
> case 0:
> + if (!ap->ioaddr.bmdma_addr)
> + return ATA_CBL_PATA_UNK;
> if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
> return ATA_CBL_PATA40;
> return ATA_CBL_PATA80;
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
2022-04-21 23:47 ` Damien Le Moal
@ 2022-04-22 1:50 ` Zheyu Ma
2022-04-25 0:38 ` Damien Le Moal
1 sibling, 0 replies; 5+ messages in thread
From: Zheyu Ma @ 2022-04-22 1:50 UTC (permalink / raw)
To: Damien Le Moal; +Cc: Sergey Shtylyov, linux-ide, Linux Kernel Mailing List
On Fri, Apr 22, 2022 at 7:48 AM Damien Le Moal
<damien.lemoal@opensource.wdc.com> wrote:
>
> On 4/21/22 10:39, Zheyu Ma wrote:
> > Before detecting the cable type on the dma bar, the driver should check
> > whether the 'bmdma_addr' is zero, which means the adapter does not
> > support DMA, otherwise we will get the following error:
> >
> > [ 5.146634] Bad IO access at port 0x1 (return inb(port))
> > [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
> > [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
> > [ 5.160238] Call Trace:
> > [ 5.160470] <TASK>
> > [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
> > [ 5.161728] ata_eh_recover+0x3520/0x6cc0
> > [ 5.168075] ata_do_eh+0x49/0x3c0
> >
> > Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
> > ---Changes in v2:
> > - Delete the useless 'else'
>
> Note for future contributions: The change log should be placed *after*
> the "---" that comes before the "diff" line below. Otherwise, the change
> log pollutes the commit message.
Thank you for the reminder, I'll pay attention to this problem next time!
Zheyu Ma
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
2022-04-21 23:47 ` Damien Le Moal
2022-04-22 1:50 ` Zheyu Ma
@ 2022-04-25 0:38 ` Damien Le Moal
2022-04-25 10:18 ` Greg KH
1 sibling, 1 reply; 5+ messages in thread
From: Damien Le Moal @ 2022-04-25 0:38 UTC (permalink / raw)
To: Zheyu Ma, s.shtylyov; +Cc: linux-ide, Greg KH, stable
On 4/22/22 08:47, Damien Le Moal wrote:
> On 4/21/22 10:39, Zheyu Ma wrote:
>> Before detecting the cable type on the dma bar, the driver should check
>> whether the 'bmdma_addr' is zero, which means the adapter does not
>> support DMA, otherwise we will get the following error:
>>
>> [ 5.146634] Bad IO access at port 0x1 (return inb(port))
>> [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
>> [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
>> [ 5.160238] Call Trace:
>> [ 5.160470] <TASK>
>> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
>> [ 5.161728] ata_eh_recover+0x3520/0x6cc0
>> [ 5.168075] ata_do_eh+0x49/0x3c0
>>
>> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
>> ---Changes in v2:
>> - Delete the useless 'else'
>
> Note for future contributions: The change log should be placed *after*
> the "---" that comes before the "diff" line below. Otherwise, the change
> log pollutes the commit message.
>
> I fixed that and applied to for-5.18-fixes. Thanks.
I completely overlooked that this needs a CC stable...
Greg,
Could you please pickup this commit for stable ?
In Linus tree/rc4, it is:
aafa9f958342 ("ata: pata_marvell: Check the 'bmdma_addr' beforing reading")
Thanks !
>
>> ---
>> drivers/ata/pata_marvell.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
>> index 0c5a51970fbf..014ccb0f45dc 100644
>> --- a/drivers/ata/pata_marvell.c
>> +++ b/drivers/ata/pata_marvell.c
>> @@ -77,6 +77,8 @@ static int marvell_cable_detect(struct ata_port *ap)
>> switch(ap->port_no)
>> {
>> case 0:
>> + if (!ap->ioaddr.bmdma_addr)
>> + return ATA_CBL_PATA_UNK;
>> if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
>> return ATA_CBL_PATA40;
>> return ATA_CBL_PATA80;
>
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
2022-04-25 0:38 ` Damien Le Moal
@ 2022-04-25 10:18 ` Greg KH
0 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2022-04-25 10:18 UTC (permalink / raw)
To: Damien Le Moal; +Cc: Zheyu Ma, s.shtylyov, linux-ide, stable
On Mon, Apr 25, 2022 at 09:38:17AM +0900, Damien Le Moal wrote:
> On 4/22/22 08:47, Damien Le Moal wrote:
> > On 4/21/22 10:39, Zheyu Ma wrote:
> >> Before detecting the cable type on the dma bar, the driver should check
> >> whether the 'bmdma_addr' is zero, which means the adapter does not
> >> support DMA, otherwise we will get the following error:
> >>
> >> [ 5.146634] Bad IO access at port 0x1 (return inb(port))
> >> [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
> >> [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
> >> [ 5.160238] Call Trace:
> >> [ 5.160470] <TASK>
> >> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
> >> [ 5.161728] ata_eh_recover+0x3520/0x6cc0
> >> [ 5.168075] ata_do_eh+0x49/0x3c0
> >>
> >> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
> >> ---Changes in v2:
> >> - Delete the useless 'else'
> >
> > Note for future contributions: The change log should be placed *after*
> > the "---" that comes before the "diff" line below. Otherwise, the change
> > log pollutes the commit message.
> >
> > I fixed that and applied to for-5.18-fixes. Thanks.
>
> I completely overlooked that this needs a CC stable...
>
> Greg,
>
> Could you please pickup this commit for stable ?
> In Linus tree/rc4, it is:
>
> aafa9f958342 ("ata: pata_marvell: Check the 'bmdma_addr' beforing reading")
Now queued up, thanks.
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-04-25 10:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-21 1:39 [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading Zheyu Ma
2022-04-21 23:47 ` Damien Le Moal
2022-04-22 1:50 ` Zheyu Ma
2022-04-25 0:38 ` Damien Le Moal
2022-04-25 10:18 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.