* 2.6.0-test1 issues, ACPI, USB, ALSA
@ 2003-07-16 22:23 david
0 siblings, 0 replies; only message in thread
From: david @ 2003-07-16 22:23 UTC (permalink / raw)
To: linux-kernel
Here are the problems I've found thusfar:
1. must boot with either acpi=off or pci=noacpi. If this isn't done,
half of things don't work right (eth0, USB mouse, etc) and when trying
to use such devices, I get a message to the effect of IRQ NN disabled
2. randomly some IRQs stop being delivered or something. I notice it
first in X when my USB mouse stops working. The PS/2 glidepoint mouse
keeps working fine. Most everything else on this IRQ (ohci-hcd, eth0)
all stop working -- sym53c8xx keeps working.
3. only 1/2 of my USB ports work. I have 6 ports, ports 1, 2, and 5
don't work.
4. if I try to use my i8x0 onboard sound (ALSA), I immediately lose
mouse/eth0/etc as above and I get a flurry of messages as will be described.
Now for the texts.
# cat usb-port1-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 1, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 1 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003402 POWER OWNER sig=k CSC
# cat usb-port1-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 1, status 100, change 1, 12 Mb/s
# cat usb-port2-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 2, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 2 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 2 status 003402 POWER OWNER sig=k CSC
# cat usb-port2-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 2, status 100, change 1, 12 Mb/s
# cat usb-port3-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 3, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 3: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 3 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00010301 CSC
LSDA PPS CCS
hub 2-0:0: port 1, status 301, change 1, 1.5 Mb/s
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00100303
PRSC LSDA PPS PES CCS
hub 2-0:0: new USB device on port 1, assigned address 5
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Mouse
usb 2-1: Manufacturer: Logitech
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: usb_new_device - registering interface 2-1:0
drivers/usb/core/usb.c: usb_hotplug
hid 2-1:0: usb_device_probe
hid 2-1:0: usb_device_probe - got id
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse] on usb-0000:00:02.1-1
# cat usb-port3-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 3, status 100, change 1, 12 Mb/s
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00030300
PESC CSC LSDA PPS
hub 2-0:0: port 1, status 300, change 3, 1.5 Mb/s
usb 2-1: USB disconnect, address 5
usb 2-1: unregistering interfaces
usb 2-1: hcd_unlink_urb dc5ef524 fail -22
usb 2-1: hcd_unlink_urb dc5ef268 fail -22
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: unregistering device
drivers/usb/core/usb.c: usb_hotplug
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00020300
PESC LSDA PPS
hub 2-0:0: port 1 enable change, status 300
The other ports are respectively similar.
# cat /proc/interrupts
CPU0
0: 1083773 XT-PIC timer
1: 3317 XT-PIC i8042
2: 0 XT-PIC cascade
5: 31286 XT-PIC sym53c8xx, ohci-hcd, eth0
8: 2 XT-PIC rtc
11: 6048 XT-PIC sym53c8xx, sym53c8xx, ehci_hcd, NVidia
nForce2
12: 61 XT-PIC i8042
14: 719 XT-PIC ide0
15: 9 XT-PIC ide1
NMI: 0
LOC: 1083344
ERR: 1039
MIS: 0
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : Unknown CPU Type
stepping : 0
cpu MHz : 1837.905
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3629.05
I'll put the lspci and dmesg and .config up on the web
(http://stuph.org/2.6.0-test1-issues) due to the size.
david
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-07-16 22:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-16 22:23 2.6.0-test1 issues, ACPI, USB, ALSA david
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.