* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
@ 2018-12-14 13:39 Stefano Babic
2018-12-14 18:37 ` Tom Rini
0 siblings, 1 reply; 8+ messages in thread
From: Stefano Babic @ 2018-12-14 13:39 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
19:02:01 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
+0100)
----------------------------------------------------------------
imx for 2019.01
- introduce support for i.MX8M
- fix size limit for Vhybrid / pico boards
- several board fixes
- w1 driver for MX2x / MX5x
----------------------------------------------------------------
Denis Zalevskiy (6):
board: ge: Remove EEPROM bus param from read_vpd()
board: ge: Move VPD EEPROM configuration to the defconfig
bootcount: i2c: Add bus switching to the I2C bootcount driver
bootcount: Configure length limit for I2C bootcount
board: ge: Move VPD reading to the vpd_reader
board: ge: Store bootcount in EEPROM on PPD and Bx50v3
Fabien Lahoudere (1):
embestmx6boards: Add SPL support
Fabio Estevam (1):
pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Gary Bisson (2):
imx: mx8m: add memory mapping for CAAM and TCM
imx: bootaux: fix stack and pc assignment on 64-bit platforms
Harald Seiler (1):
pcm058: fix NAND flash not using badblock table
Lukasz Majewski (3):
ARM: vybrid: Provide pinctrl driver for Vybrid (vf610)
ARM: DTS: Add iomux node to vf.dtsi for Vybrid devices
ARM: DTS: Provide pinfunc definitions for vybrid vf610 from Linux
kernel
Martin Fuzzey (1):
w1: Add driver for i.MX bus master controller
Martin Husemann (1):
tools: improve portability of imx_cntr_image.sh
Michael Heimpold (4):
configs: mx23_olinuxino_defconfig: fix status led definition
configs: mx23_olinuxino_defconfig: disable bootefi command
doc: imx: fix typo in imximage.txt
doc: imx: fix typos in mxsimage.txt
Parthiban Nallathambi (1):
imx: hab: extend hab_auth_img to calculate ivt_offset
Peng Fan (20):
imx: imx8qxp_mek: imximage: remove config.h
spl: introduce function prototypes
firmware: psci: introduce SPL_ARM_PSCI_FW
tools: add i.MX8M image support
arm: imx8qxp: build u-boot-dtb.cfgout before checking files
Introduce CONFIG_FIT_EXTERNAL_OFFSET
imx: cpu: add CHIP_REV_2_1 macro
imx: introduce is_imx8mq helper
imx: rename mx8m,MX8M to imx8m,IMX8M
imx: spl: add MMC BOOT Device for i.MX8M
imx: imx8m: clock refactor dram pll part
imx: imx8m: introduce script to generate fit image
imx: imx8m: introduce imximage cfg file
imx: imx8mq: build flash.bin
imx: imx8m: not build bootaux when building SPL
imx: imx8m: add lpddr4 header file
drivers: ddr: introduce DDR driver for i.MX8M
imx: add i.MX8MQ EVK support
imx8m: ddr: removed unused macros
imx: mx53ppd: fix build error
Pierre-Jean Texier (1):
warp7: configs: add CONFIG_FIT option
Wolfgang Denk (1):
Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Xiaoliang Yang (2):
watchdog: driver support for fsl-lsch2
watchdog: imx: add config to disable wdog reset
Yaniv Levinsky (1):
arm: imx7d: cl-som-imx7: migration to CONFIG_BLK
Ye Li (2):
SPL: Add HAB image authentication to FIT
imx8m: Enable CONFIG_SPL_FIT_IMAGE_TINY for iMX8M
Kconfig
| 10 +
Makefile
| 24 +-
arch/arm/Kconfig
| 4 +-
arch/arm/Makefile
| 4 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
| 11 +
arch/arm/dts/Makefile
| 2 +
arch/arm/dts/fsl-imx8mq-evk.dts
| 414 ++++++++++++++++++++++++++++++++++
arch/arm/dts/vf.dtsi
| 6 +
arch/arm/dts/vf610-pinfunc.h
| 810 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-imx/cpu.h
| 5 +-
arch/arm/include/asm/{arch-mx8m => arch-imx8m}/clock.h
| 22 ++
arch/arm/include/asm/{arch-mx8m => arch-imx8m}/crm_regs.h
| 4 +-
arch/arm/include/asm/arch-imx8m/ddr.h
| 740 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/{arch-mx8m => arch-imx8m}/gpio.h
| 4 +-
arch/arm/include/asm/{arch-mx8m => arch-imx8m}/imx-regs.h
| 4 +-
arch/arm/include/asm/{arch-mx8m/mx8mq_pins.h =>
arch-imx8m/imx8mq_pins.h} | 4 +-
arch/arm/include/asm/arch-imx8m/lpddr4_define.h
| 97 ++++++++
arch/arm/include/asm/{arch-mx8m => arch-imx8m}/sys_proto.h
| 4 +-
arch/arm/include/asm/arch-mx8m/ddr.h
| 355 -----------------------------
arch/arm/include/asm/mach-imx/iomux-v3.h
| 2 +-
arch/arm/include/asm/mach-imx/regs-lcdif.h
| 6 +-
arch/arm/include/asm/mach-imx/sys_proto.h
| 3 +-
arch/arm/mach-imx/Makefile
| 54 +++--
arch/arm/mach-imx/cpu.c
| 16 +-
arch/arm/mach-imx/hab.c
| 29 ++-
arch/arm/mach-imx/imx8m/Kconfig
| 23 ++
arch/arm/mach-imx/{mx8m => imx8m}/Makefile
| 0
arch/arm/mach-imx/{mx8m => imx8m}/clock.c
| 138 +++++++++---
arch/arm/mach-imx/{mx8m => imx8m}/clock_slice.c
| 0
arch/arm/mach-imx/imx8m/imximage.cfg
| 17 ++
arch/arm/mach-imx/{mx8m => imx8m}/lowlevel_init.S
| 0
arch/arm/mach-imx/{mx8m => imx8m}/soc.c
| 16 ++
arch/arm/mach-imx/imx_bootaux.c
| 8 +-
arch/arm/mach-imx/mkimage_fit_atf.sh
| 137 ++++++++++++
arch/arm/mach-imx/mx6/Kconfig
| 1 +
arch/arm/mach-imx/mx8m/Kconfig
| 10 -
arch/arm/mach-imx/spl.c
| 59 ++++-
board/embest/mx6boards/mx6boards.c
| 48 ++++
board/freescale/imx8mq_evk/Kconfig
| 12 +
board/freescale/imx8mq_evk/MAINTAINERS
| 6 +
board/freescale/imx8mq_evk/Makefile
| 12 +
board/freescale/imx8mq_evk/README
| 36 +++
board/freescale/imx8mq_evk/imx8mq_evk.c
| 130 +++++++++++
board/freescale/imx8mq_evk/lpddr4_timing.c
| 1320
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mq_evk/lpddr4_timing_b0.c
| 1191
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mq_evk/spl.c
| 246 ++++++++++++++++++++
board/freescale/imx8qxp_mek/imximage.cfg
| 1 -
board/ge/bx50v3/Kconfig
| 2 +
board/ge/bx50v3/bx50v3.c
| 57 +----
board/ge/common/Kconfig
| 14 ++
board/ge/common/vpd_reader.c
| 57 ++++-
board/ge/common/vpd_reader.h
| 16 +-
board/ge/mx53ppd/Kconfig
| 2 +
board/ge/mx53ppd/mx53ppd.c
| 50 +----
common/image.c
| 1 +
common/spl/Kconfig
| 1 +
common/spl/spl_fit.c
| 21 +-
configs/cl-som-imx7_defconfig
| 6 +-
configs/ge_bx50v3_defconfig
| 27 ++-
configs/imx8mq_evk_defconfig
| 37 +++
configs/mx23_olinuxino_defconfig
| 3 +-
configs/mx53ppd_defconfig
| 29 ++-
configs/riotboard_spl_defconfig
| 48 ++++
configs/warp7_defconfig
| 2 +
doc/device-tree-bindings/w1/mxc-w1.txt
| 37 +++
doc/imx/mkimage/imximage.txt
| 2 +-
doc/imx/mkimage/mxsimage.txt
| 4 +-
drivers/Makefile
| 1 +
drivers/bootcount/Kconfig
| 21 +-
drivers/bootcount/bootcount_i2c.c
| 79 ++++++-
drivers/ddr/Kconfig
| 1 +
drivers/ddr/imx/Kconfig
| 1 +
drivers/ddr/imx/imx8m/Kconfig
| 22 ++
drivers/ddr/imx/imx8m/Makefile
| 11 +
drivers/ddr/imx/imx8m/ddr4_init.c
| 113 ++++++++++
drivers/ddr/imx/imx8m/ddrphy_csr.c
| 732 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ddr/imx/imx8m/ddrphy_train.c
| 86 +++++++
drivers/ddr/imx/imx8m/ddrphy_utils.c
| 186 +++++++++++++++
drivers/ddr/imx/imx8m/helper.c
| 170 ++++++++++++++
drivers/ddr/imx/imx8m/lpddr4_init.c
| 188 ++++++++++++++++
drivers/firmware/Kconfig
| 4 +
drivers/firmware/Makefile
| 2 +-
drivers/gpio/mxc_gpio.c
| 18 +-
drivers/misc/mxc_ocotp.c
| 6 +-
drivers/mmc/fsl_esdhc.c
| 8 +-
drivers/net/fec_mxc.c
| 2 +-
drivers/pinctrl/nxp/Kconfig
| 14 ++
drivers/pinctrl/nxp/Makefile
| 1 +
drivers/pinctrl/nxp/pinctrl-vf610.c
| 40 ++++
drivers/w1/Kconfig
| 14 ++
drivers/w1/Makefile
| 1 +
drivers/w1/mxc_w1.c
| 232 +++++++++++++++++++
drivers/watchdog/Kconfig
| 6 +
drivers/watchdog/Makefile
| 2 +
drivers/watchdog/imx_watchdog.c
| 9 +
include/configs/embestmx6boards.h
| 13 ++
include/configs/ge_bx50v3.h
| 6 +-
include/configs/imx8mq_evk.h
| 252 +++++++++++++++++++++
include/configs/mx53ppd.h
| 6 +-
include/configs/pcm058.h
| 1 +
include/configs/pico-imx7d.h
| 3 +-
include/image.h
| 1 +
include/imximage.h
| 17 +-
include/spl.h
| 13 ++
tools/Makefile
| 1 +
tools/imagetool.h
| 1 +
tools/imx8m_image.sh
| 43 ++++
tools/imx8mimage.c
| 623 +++++++++++++++++++++++++++++++++++++++++++++++++++
tools/imx_cntr_image.sh
| 2 +-
tools/mkimage.c
| 7 +
110 files changed, 8812 insertions(+), 608 deletions(-)
create mode 100644 arch/arm/dts/fsl-imx8mq-evk.dts
create mode 100644 arch/arm/dts/vf610-pinfunc.h
rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/clock.h (97%)
rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/crm_regs.h (65%)
create mode 100644 arch/arm/include/asm/arch-imx8m/ddr.h
rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/gpio.h (63%)
rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/imx-regs.h (99%)
rename arch/arm/include/asm/{arch-mx8m/mx8mq_pins.h =>
arch-imx8m/imx8mq_pins.h} (99%)
create mode 100644 arch/arm/include/asm/arch-imx8m/lpddr4_define.h
rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/sys_proto.h (82%)
delete mode 100644 arch/arm/include/asm/arch-mx8m/ddr.h
create mode 100644 arch/arm/mach-imx/imx8m/Kconfig
rename arch/arm/mach-imx/{mx8m => imx8m}/Makefile (100%)
rename arch/arm/mach-imx/{mx8m => imx8m}/clock.c (85%)
rename arch/arm/mach-imx/{mx8m => imx8m}/clock_slice.c (100%)
create mode 100644 arch/arm/mach-imx/imx8m/imximage.cfg
rename arch/arm/mach-imx/{mx8m => imx8m}/lowlevel_init.S (100%)
rename arch/arm/mach-imx/{mx8m => imx8m}/soc.c (92%)
create mode 100755 arch/arm/mach-imx/mkimage_fit_atf.sh
delete mode 100644 arch/arm/mach-imx/mx8m/Kconfig
create mode 100644 board/freescale/imx8mq_evk/Kconfig
create mode 100644 board/freescale/imx8mq_evk/MAINTAINERS
create mode 100644 board/freescale/imx8mq_evk/Makefile
create mode 100644 board/freescale/imx8mq_evk/README
create mode 100644 board/freescale/imx8mq_evk/imx8mq_evk.c
create mode 100644 board/freescale/imx8mq_evk/lpddr4_timing.c
create mode 100644 board/freescale/imx8mq_evk/lpddr4_timing_b0.c
create mode 100644 board/freescale/imx8mq_evk/spl.c
create mode 100644 board/ge/common/Kconfig
create mode 100644 configs/imx8mq_evk_defconfig
create mode 100644 configs/riotboard_spl_defconfig
create mode 100644 doc/device-tree-bindings/w1/mxc-w1.txt
create mode 100644 drivers/ddr/imx/Kconfig
create mode 100644 drivers/ddr/imx/imx8m/Kconfig
create mode 100644 drivers/ddr/imx/imx8m/Makefile
create mode 100644 drivers/ddr/imx/imx8m/ddr4_init.c
create mode 100644 drivers/ddr/imx/imx8m/ddrphy_csr.c
create mode 100644 drivers/ddr/imx/imx8m/ddrphy_train.c
create mode 100644 drivers/ddr/imx/imx8m/ddrphy_utils.c
create mode 100644 drivers/ddr/imx/imx8m/helper.c
create mode 100644 drivers/ddr/imx/imx8m/lpddr4_init.c
create mode 100644 drivers/pinctrl/nxp/pinctrl-vf610.c
create mode 100644 drivers/w1/mxc_w1.c
create mode 100644 include/configs/imx8mq_evk.h
create mode 100755 tools/imx8m_image.sh
create mode 100644 tools/imx8mimage.c
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 13:39 [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214 Stefano Babic
@ 2018-12-14 18:37 ` Tom Rini
2018-12-14 22:03 ` Stefano Babic
2018-12-16 21:12 ` Lukasz Majewski
0 siblings, 2 replies; 8+ messages in thread
From: Tom Rini @ 2018-12-14 18:37 UTC (permalink / raw)
To: u-boot
On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
>
> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
> 19:02:01 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
>
> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
>
> pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
> +0100)
>
NAK. You're failing the "no new defconfigs without MAINTAINERS" test in
Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
Also, Wolfgang's patch is breaking
guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
in my specific Debian chroot and I need to dig in more to provide
something useful there other than "it fails". So please drop that for
now too. Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181214/cfcad494/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 18:37 ` Tom Rini
@ 2018-12-14 22:03 ` Stefano Babic
2018-12-14 22:06 ` Tom Rini
2018-12-16 21:12 ` Lukasz Majewski
1 sibling, 1 reply; 8+ messages in thread
From: Stefano Babic @ 2018-12-14 22:03 UTC (permalink / raw)
To: u-boot
On 14/12/18 19:37, Tom Rini wrote:
> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
>
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>>
>> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
>> 19:02:01 -0500)
>>
>> are available in the Git repository at:
>>
>> git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
>>
>> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
>>
>> pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
>> +0100)
>>
>
> NAK. You're failing the "no new defconfigs without MAINTAINERS" test in
> Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
>
I see, I'll ix it.
> Also, Wolfgang's patch is breaking
> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> in my specific Debian chroot and I need to dig in more to provide
> something useful there other than "it fails". So please drop that for
> now too.
I do, I put Fabio's pico-7d in wait queue as this depends on Wolfgang's
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 22:03 ` Stefano Babic
@ 2018-12-14 22:06 ` Tom Rini
2018-12-14 22:09 ` Fabio Estevam
0 siblings, 1 reply; 8+ messages in thread
From: Tom Rini @ 2018-12-14 22:06 UTC (permalink / raw)
To: u-boot
On Fri, Dec 14, 2018 at 11:03:59PM +0100, Stefano Babic wrote:
>
>
> On 14/12/18 19:37, Tom Rini wrote:
> > On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
> >
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >>
> >> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
> >>
> >> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
> >> 19:02:01 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >> git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
> >>
> >> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
> >>
> >> pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
> >> +0100)
> >>
> >
> > NAK. You're failing the "no new defconfigs without MAINTAINERS" test in
> > Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
> >
>
> I see, I'll ix it.
>
> > Also, Wolfgang's patch is breaking
> > guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> > in my specific Debian chroot and I need to dig in more to provide
> > something useful there other than "it fails". So please drop that for
> > now too.
>
> I do, I put Fabio's pico-7d in wait queue as this depends on Wolfgang's
I replied to Wolfgang's patch with the problem and I suggest that
pico-7d simply stop using >> as it's not going to work once we Kconfig
migrate anyhow.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181214/f0cc9ba3/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 22:06 ` Tom Rini
@ 2018-12-14 22:09 ` Fabio Estevam
2018-12-14 22:10 ` Tom Rini
0 siblings, 1 reply; 8+ messages in thread
From: Fabio Estevam @ 2018-12-14 22:09 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Fri, Dec 14, 2018 at 8:06 PM Tom Rini <trini@konsulko.com> wrote:
> I replied to Wolfgang's patch with the problem and I suggest that
> pico-7d simply stop using >> as it's not going to work once we Kconfig
> migrate anyhow.
pico-imx7d does not use >>.
I sent 5 different versions of this patch and the initial ones do not
depend on Wolfgang's patch, as I hardcoded the offset.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 22:09 ` Fabio Estevam
@ 2018-12-14 22:10 ` Tom Rini
0 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2018-12-14 22:10 UTC (permalink / raw)
To: u-boot
On Fri, Dec 14, 2018 at 08:09:18PM -0200, Fabio Estevam wrote:
> Hi Tom,
>
> On Fri, Dec 14, 2018 at 8:06 PM Tom Rini <trini@konsulko.com> wrote:
>
> > I replied to Wolfgang's patch with the problem and I suggest that
> > pico-7d simply stop using >> as it's not going to work once we Kconfig
> > migrate anyhow.
>
> pico-imx7d does not use >>.
>
> I sent 5 different versions of this patch and the initial ones do not
> depend on Wolfgang's patch, as I hardcoded the offset.
OK, thanks.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181214/c562b83d/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-14 18:37 ` Tom Rini
2018-12-14 22:03 ` Stefano Babic
@ 2018-12-16 21:12 ` Lukasz Majewski
2018-12-17 9:53 ` Stefano Babic
1 sibling, 1 reply; 8+ messages in thread
From: Lukasz Majewski @ 2018-12-16 21:12 UTC (permalink / raw)
To: u-boot
Dear Stefano,
> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
>
> > Hi Tom,
> >
> > please pull from u-boot-imx, thanks !
> >
> >
> > The following changes since commit
> > c49aff3e66b930aa06936afee401cf5e19377958:
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-sunxi
> > (2018-12-07 19:02:01 -0500)
> >
> > are available in the Git repository at:
> >
> > git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
> >
> > for you to fetch changes up to
> > 5d0f0b567c78197db6f2f47c89a18b44ade28284:
> >
> > pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14
> > 14:30:57 +0100)
> >
>
> NAK. You're failing the "no new defconfigs without MAINTAINERS" test
> in Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
>
> Also, Wolfgang's patch is breaking
> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> in my specific Debian chroot and I need to dig in more to provide
> something useful there other than "it fails". So please drop that for
> now too. Thanks!
>
As this PR is not accepted; Stefano, could you also pull following
changes (relevant for vybrid):
http://patchwork.ozlabs.org/patch/1006731/
http://patchwork.ozlabs.org/patch/1006732/
http://patchwork.ozlabs.org/patch/1006733/
One of it:
"nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc"
is a fix.
The other two just add support for Vybrid's NFC controller in device
tree. There shall be no issues with this code for in-tree boards.
Thanks in advance and sorry for a late reply to this thread.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181216/f617ee59/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
2018-12-16 21:12 ` Lukasz Majewski
@ 2018-12-17 9:53 ` Stefano Babic
0 siblings, 0 replies; 8+ messages in thread
From: Stefano Babic @ 2018-12-17 9:53 UTC (permalink / raw)
To: u-boot
On 16/12/18 22:12, Lukasz Majewski wrote:
> Dear Stefano,
>
>> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
>>
>>> Hi Tom,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>>
>>> The following changes since commit
>>> c49aff3e66b930aa06936afee401cf5e19377958:
>>>
>>> Merge branch 'master' of git://git.denx.de/u-boot-sunxi
>>> (2018-12-07 19:02:01 -0500)
>>>
>>> are available in the Git repository at:
>>>
>>> git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
>>>
>>> for you to fetch changes up to
>>> 5d0f0b567c78197db6f2f47c89a18b44ade28284:
>>>
>>> pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14
>>> 14:30:57 +0100)
>>>
>>
>> NAK. You're failing the "no new defconfigs without MAINTAINERS" test
>> in Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
>>
>> Also, Wolfgang's patch is breaking
>> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
>> in my specific Debian chroot and I need to dig in more to provide
>> something useful there other than "it fails". So please drop that for
>> now too. Thanks!
>>
>
> As this PR is not accepted; Stefano, could you also pull following
> changes (relevant for vybrid):
>
> http://patchwork.ozlabs.org/patch/1006731/
> http://patchwork.ozlabs.org/patch/1006732/
> http://patchwork.ozlabs.org/patch/1006733/
>
> One of it:
> "nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc"
> is a fix.
>
> The other two just add support for Vybrid's NFC controller in device
> tree. There shall be no issues with this code for in-tree boards.
>
> Thanks in advance and sorry for a late reply to this thread.
>
I have picked up the 3 patches, my build is running..
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-12-17 9:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-14 13:39 [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214 Stefano Babic
2018-12-14 18:37 ` Tom Rini
2018-12-14 22:03 ` Stefano Babic
2018-12-14 22:06 ` Tom Rini
2018-12-14 22:09 ` Fabio Estevam
2018-12-14 22:10 ` Tom Rini
2018-12-16 21:12 ` Lukasz Majewski
2018-12-17 9:53 ` Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.