From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Adam Ford <aford173@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Grygorii Strashko <grygorii.strashko@ti.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
Date: Thu, 9 Sep 2021 10:49:45 +0200 [thread overview]
Message-ID: <3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be>
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/cat875.dtsi | 2 ++
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c43d9..a69d24e9c61db052 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -21,6 +21,8 @@ &avb {
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index dde3a07bc417c690..ad898c6db4e62df6 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -24,6 +24,8 @@ &avb {
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Adam Ford <aford173@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Grygorii Strashko <grygorii.strashko@ti.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
Date: Thu, 9 Sep 2021 10:49:45 +0200 [thread overview]
Message-ID: <3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be>
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/cat875.dtsi | 2 ++
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c43d9..a69d24e9c61db052 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -21,6 +21,8 @@ &avb {
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index dde3a07bc417c690..ad898c6db4e62df6 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -24,6 +24,8 @@ &avb {
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-09 8:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-09 8:49 [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 1/9] ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 2/9] ARM: dts: renesas: Add compatible properties to KSZ8081 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-23 11:41 ` Biju Das
2021-09-23 11:41 ` Biju Das
2021-09-09 8:49 ` [PATCH 4/9] iARM: dts: renesas: Add compatible properties to LAN8710A " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 5/9] ARM: dts: renesas: Add compatible properties to RTL8201FL " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 6/9] ARM: dts: renesas: Add compatible properties to uPD6061x " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 7/9] arm64: dts: renesas: Add compatible properties to AR8031 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-28 7:40 ` Geert Uytterhoeven
2021-09-28 7:40 ` Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven [this message]
2021-09-09 8:49 ` [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E " Geert Uytterhoeven
2021-09-23 11:38 ` Biju Das
2021-09-23 11:38 ` Biju Das
2021-09-23 11:00 ` [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-23 11:00 ` Geert Uytterhoeven
2021-09-23 14:09 ` Andrew Lunn
2021-09-23 14:09 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=aford173@gmail.com \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=hkallweit1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.