From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Yoshinori Sato <ysato@users.sourceforge.jp>,
Rich Felker <dalias@libc.org>
Cc: Rob Landley <rob@landley.net>,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [J-core] [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree
Date: Fri, 18 May 2018 07:51:02 +0000 [thread overview]
Message-ID: <3bb59c28-3160-2892-c8f2-fd27777d61a9@physik.fu-berlin.de> (raw)
In-Reply-To: <87tvr814pn.wl-ysato@users.sourceforge.jp>
On 05/16/2018 08:42 AM, Yoshinori Sato wrote:
>> Can you give me a brief explanation of how to reproduce the bootloader
>> installation? For now I'm just using the existing MBR/partitioning you
>> sent me, and replacing zImage.itb in /boot makes it attempt to load a
>> new kernel, but I haven't gotten any output yet to know if it's
>> working.
>
> landisk's u-boot using spl.
> You should be able to update it by the following procedure.
> 1. Rebuild u-boot.
> 2. Format ext4 for HDD first partition.
> 3. put u-boot.img to HDD first partition.
> 4. put spl/u-boot-spl.bin to HDD MBR and subsequent region.
I will try to set up uboot this way on my USL-5P over the weekend.
Thanks for these instructions.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
WARNING: multiple messages have this Message-ID (diff)
From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Yoshinori Sato <ysato@users.sourceforge.jp>,
Rich Felker <dalias@libc.org>
Cc: Rob Landley <rob@landley.net>,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [J-core] [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree
Date: Fri, 18 May 2018 09:51:02 +0200 [thread overview]
Message-ID: <3bb59c28-3160-2892-c8f2-fd27777d61a9@physik.fu-berlin.de> (raw)
In-Reply-To: <87tvr814pn.wl-ysato@users.sourceforge.jp>
On 05/16/2018 08:42 AM, Yoshinori Sato wrote:
>> Can you give me a brief explanation of how to reproduce the bootloader
>> installation? For now I'm just using the existing MBR/partitioning you
>> sent me, and replacing zImage.itb in /boot makes it attempt to load a
>> new kernel, but I haven't gotten any output yet to know if it's
>> working.
>
> landisk's u-boot using spl.
> You should be able to update it by the following procedure.
> 1. Rebuild u-boot.
> 2. Format ext4 for HDD first partition.
> 3. put u-boot.img to HDD first partition.
> 4. put spl/u-boot-spl.bin to HDD MBR and subsequent region.
I will try to set up uboot this way on my USL-5P over the weekend.
Thanks for these instructions.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
next prev parent reply other threads:[~2018-05-18 7:51 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-03 16:46 [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 01/22] sh: Add sh-specific early_init_dt_reserve_memory_arch Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-04 2:03 ` Rich Felker
2016-07-04 2:03 ` Rich Felker
2016-07-06 13:53 ` Yoshinori Sato
2016-07-06 13:53 ` Yoshinori Sato
2016-07-06 14:50 ` Rich Felker
2016-07-06 14:50 ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 02/22] sh: More early unflatten device tree Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 03/22] sh: set preset_lpj Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 04/22] sh: Use P1SEGADDR Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-04 1:48 ` Rich Felker
2016-07-04 1:48 ` Rich Felker
2016-07-06 14:11 ` Yoshinori Sato
2016-07-06 14:11 ` Yoshinori Sato
2016-07-06 14:53 ` Rich Felker
2016-07-06 14:53 ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 05/22] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 06/22] sh: FDT address save before bank change Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 07/22] sh: Passing FDT address on zImage Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 08/22] sh: Disable board specific code on device tree mode Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 09/22] sh: Use GENERIC_IOMAP " Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 10/22] sh: Add board specific initialize of of-generic Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-04 1:35 ` Rich Felker
2016-07-04 1:35 ` Rich Felker
2016-07-06 14:27 ` Yoshinori Sato
2016-07-06 14:27 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 11/22] sh: SH7750/51 CPG Driver Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
[not found] ` <1467564402-2649-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-03 16:46 ` [PATCH v6 12/22] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-05 15:53 ` Rob Herring
2016-07-05 15:53 ` Rob Herring
2016-07-06 16:19 ` Yoshinori Sato
2016-07-06 16:19 ` Yoshinori Sato
[not found] ` <1467564402-2649-13-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-22 22:59 ` Bjorn Helgaas
2016-07-22 22:59 ` Bjorn Helgaas
2016-07-22 22:59 ` Bjorn Helgaas
2016-07-03 16:46 ` [PATCH v5 13/22] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 14/22] sh: SH7751 core dtsi Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 15/22] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-04 1:55 ` Rich Felker
2016-07-04 1:55 ` Rich Felker
2016-07-06 16:17 ` Yoshinori Sato
2016-07-06 16:17 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 16/22] pci: pci_config_window move to linux/pci.h Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 17/22] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 18/22] sh: Add separate DTB build rule Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 19/22] sh: IO-DATA HDL-U (a.k.a landisk) IRQCHIP driver Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-11 14:02 ` Rob Herring
2016-07-11 14:02 ` Rob Herring
2016-07-03 16:46 ` [PATCH v5 20/22] sh: IO-DATA HDL-U (a.k.a landisk) DeviceTree Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 19:00 ` Sergei Shtylyov
2016-07-03 19:00 ` Sergei Shtylyov
2016-07-06 16:18 ` Yoshinori Sato
2016-07-06 16:18 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 21/22] sh: Renesas RTS7751R2Dplus (a.k.a R2Dplus) IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 22/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato
2017-11-17 10:37 ` [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree John Paul Adrian Glaubitz
2017-11-17 10:37 ` John Paul Adrian Glaubitz
2017-11-17 17:39 ` [J-core] " Rob Landley
2017-11-17 17:39 ` Rob Landley
2017-11-17 17:49 ` John Paul Adrian Glaubitz
2017-11-17 17:49 ` John Paul Adrian Glaubitz
2017-11-17 19:17 ` Rich Felker
2017-11-17 19:17 ` Rich Felker
2017-11-17 19:54 ` John Paul Adrian Glaubitz
2018-01-05 21:28 ` Rich Felker
2018-01-05 21:28 ` Rich Felker
2018-01-05 21:47 ` John Paul Adrian Glaubitz
2018-01-05 21:47 ` John Paul Adrian Glaubitz
2018-01-05 22:00 ` Rich Felker
2018-01-05 22:00 ` Rich Felker
2018-01-05 22:10 ` John Paul Adrian Glaubitz
2018-01-05 22:10 ` John Paul Adrian Glaubitz
2018-05-03 1:37 ` Rich Felker
2018-05-03 1:37 ` Rich Felker
2018-05-03 2:33 ` Rich Felker
2018-05-03 2:33 ` Rich Felker
2018-05-03 10:07 ` John Paul Adrian Glaubitz
2018-05-03 10:07 ` John Paul Adrian Glaubitz
2018-05-03 15:41 ` Rich Felker
2018-05-03 15:41 ` Rich Felker
2018-05-07 1:40 ` Yoshinori Sato
2018-05-07 1:40 ` Yoshinori Sato
2018-05-07 11:00 ` John Paul Adrian Glaubitz
2018-05-07 11:00 ` John Paul Adrian Glaubitz
2018-05-07 13:40 ` Rob Landley
2018-05-07 13:40 ` Rob Landley
2018-05-07 13:50 ` John Paul Adrian Glaubitz
2018-05-07 13:50 ` John Paul Adrian Glaubitz
2018-05-07 14:05 ` Geert Uytterhoeven
2018-05-07 14:05 ` Geert Uytterhoeven
2018-05-07 14:43 ` Rich Felker
2018-05-07 14:43 ` Rich Felker
2018-05-07 15:13 ` Rob Landley
2018-05-07 15:13 ` Rob Landley
2018-05-07 15:52 ` Rich Felker
2018-05-07 15:52 ` Rich Felker
2018-05-07 14:45 ` Rich Felker
2018-05-07 14:45 ` Rich Felker
2018-05-07 15:28 ` Rob Landley
2018-05-07 15:28 ` Rob Landley
2018-05-07 15:55 ` Rich Felker
2018-05-07 15:55 ` Rich Felker
2018-05-07 20:01 ` Rob Landley
2018-05-07 20:01 ` Rob Landley
2018-05-08 12:05 ` Yoshinori Sato
2018-05-08 12:05 ` Yoshinori Sato
2018-05-15 1:41 ` Rich Felker
2018-05-15 1:41 ` Rich Felker
2018-05-16 6:42 ` Yoshinori Sato
2018-05-16 6:42 ` Yoshinori Sato
2018-05-18 7:51 ` John Paul Adrian Glaubitz [this message]
2018-05-18 7:51 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3bb59c28-3160-2892-c8f2-fd27777d61a9@physik.fu-berlin.de \
--to=glaubitz@physik.fu-berlin.de \
--cc=dalias@libc.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=rob@landley.net \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.