* system is hang during uboot with wolfpass recipe firmware
@ 2020-03-06 1:08 zhang_cy1989
0 siblings, 0 replies; only message in thread
From: zhang_cy1989 @ 2020-03-06 1:08 UTC (permalink / raw)
To: openbmc
[-- Attachment #1: Type: text/plain, Size: 1066 bytes --]
Dear All
I build openbmc recipies with https://github.com/Intel-BMC/openbmc/tree/intel/meta-openbmc-mods/meta-wolfpass/conf.
And got 64M size firmware.
Then put it into flash of real board.
Unfortunately, I got these tips during uboot phase:
U-Boot 2016.07 (Mar 05 2020 - 09:21:17 +0000)
SOC : AST2500-A2
RST : 0x11
PLL : 24 MHz
CPU : 792 MHz
MEM : 792 MHz, EEC: Disable, Cache: Disable
VGA : 16 MiB
DRAM : init by SOC
Watchdog enabled
DRAM: 496 MiB
Flash: 64 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Un-Protected 1 sectors
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
Protected 1 sectors
Net: MAC0 : RMII/NCSI
MAC1 : RGMII
FTGMAC100#0
Error: FTGMAC100#0 address not set.
, FTGMAC100#1
Error: FTGMAC100#1 address not set.
After error tip:Error: FTGMAC100#1 address not set.
The system is hang and can not go ahead.
How can I solve this problem, please help me.
Felix
[-- Attachment #2: Type: text/html, Size: 4827 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-03-06 1:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-06 1:08 system is hang during uboot with wolfpass recipe firmware zhang_cy1989
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.