[net] ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

[net] ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

[Ziyang Xuan]

Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.

Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1

Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done

$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done

And in order to increase the probability of reproduce,
we can add mdelay() in find_match() as following:

static bool find_match(struct fib6_nh *nh, u32 fib6_flags,
        if (nh->fib_nh_flags & RTNH_F_DEAD)
                goto out;

+       mdelay(1000);
        if (ip6_ignore_linkdown(nh->fib_nh_dev) &&
            nh->fib_nh_flags & RTNH_F_LINKDOWN &&
            !(strict & RT6_LOOKUP_F_IGNORE_LINKSTATE))

=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263

CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
 dump_backtrace+0x1a8/0x230
 show_stack+0x20/0x70
 dump_stack_lvl+0x68/0x84
 print_report+0xc4/0x120
 kasan_report+0x84/0x120
 __asan_load4+0x94/0xd0
 find_match.part.0+0x70/0x134
 __find_rr_leaf+0x408/0x470
 fib6_table_lookup+0x264/0x540
 ip6_pol_route+0xf4/0x260
 ip6_pol_route_output+0x58/0x70
 fib6_rule_lookup+0x1a8/0x330
 ip6_route_output_flags_noref+0xd8/0x1a0
 ip6_route_output_flags+0x58/0x160
 ip6_dst_lookup_tail+0x5b4/0x85c
 ip6_dst_lookup_flow+0x98/0x120
 rawv6_sendmsg+0x49c/0xc70
 inet_sendmsg+0x68/0x94
 sock_sendmsg+0x8c/0xb0

It is because ip6_ptr has been assigned to NULL in addrconf_ifdown(),
and ip6_ignore_linkdown() in find_match() accesses ip6_ptr directly.
Although find_match() routine is under rcu_read_lock(), but there is
not synchronize_net() before assign NULL to make rcu grace period end.

So we can add synchronize_net() before assign ip6_ptr to NULL in
addrconf_ifdown() to fix the null-ptr-deref bug.

Fixes: 8814c4b53381 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
---
 net/ipv6/addrconf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 49cc6587dd77..63d33b29ad21 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3757,6 +3757,7 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
 		idev->dead = 1;
 
 		/* protected by rtnl_lock */
+		synchronize_net();
 		RCU_INIT_POINTER(dev->ip6_ptr, NULL);
 
 		/* Step 1.5: remove snmp6 entry */
-- 
2.25.1

Re: [net] ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

[Eric Dumazet]

On Fri, Jul 22, 2022 at 9:42 AM Ziyang Xuan
<william.xuanziyang@huawei.com> wrote:
>
> Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
> device while matching route. That may trigger null-ptr-deref bug
> for ip6_ptr probability as following.
>
> Reproducer as following:
> Firstly, prepare conditions:
> $ip netns add ns1
> $ip netns add ns2
> $ip link add veth1 type veth peer name veth2
> $ip link set veth1 netns ns1
> $ip link set veth2 netns ns2
> $ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
> $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
> $ip netns exec ns1 ifconfig veth1 up
> $ip netns exec ns2 ifconfig veth2 up
> $ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
> $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
>
> Secondly, execute the following two commands in two ssh windows
> respectively:
> $ip netns exec ns1 sh
> $while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
>
> $ip netns exec ns1 sh
> $while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
>
> And in order to increase the probability of reproduce,
> we can add mdelay() in find_match() as following:
>
> static bool find_match(struct fib6_nh *nh, u32 fib6_flags,
>         if (nh->fib_nh_flags & RTNH_F_DEAD)
>                 goto out;
>
> +       mdelay(1000);

But adding a mdelay() in an rcu_read_lock() should not be possible.

I guess this means _this_ function is not properly using rcu protection.

>         if (ip6_ignore_linkdown(nh->fib_nh_dev) &&
>             nh->fib_nh_flags & RTNH_F_LINKDOWN &&
>             !(strict & RT6_LOOKUP_F_IGNORE_LINKSTATE))
>
> =========================================================
> BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
> Read of size 4 at addr 0000000000000308 by task ping6/263
>
> CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
> Call trace:
>  dump_backtrace+0x1a8/0x230
>  show_stack+0x20/0x70
>  dump_stack_lvl+0x68/0x84
>  print_report+0xc4/0x120
>  kasan_report+0x84/0x120
>  __asan_load4+0x94/0xd0
>  find_match.part.0+0x70/0x134
>  __find_rr_leaf+0x408/0x470
>  fib6_table_lookup+0x264/0x540
>  ip6_pol_route+0xf4/0x260
>  ip6_pol_route_output+0x58/0x70
>  fib6_rule_lookup+0x1a8/0x330
>  ip6_route_output_flags_noref+0xd8/0x1a0
>  ip6_route_output_flags+0x58/0x160
>  ip6_dst_lookup_tail+0x5b4/0x85c
>  ip6_dst_lookup_flow+0x98/0x120
>  rawv6_sendmsg+0x49c/0xc70
>  inet_sendmsg+0x68/0x94
>  sock_sendmsg+0x8c/0xb0
>
> It is because ip6_ptr has been assigned to NULL in addrconf_ifdown(),
> and ip6_ignore_linkdown() in find_match() accesses ip6_ptr directly.
> Although find_match() routine is under rcu_read_lock(), but there is
> not synchronize_net() before assign NULL to make rcu grace period end.
>

This is not how RCU works.

> So we can add synchronize_net() before assign ip6_ptr to NULL in
> addrconf_ifdown() to fix the null-ptr-deref bug.

This does not make sense to me.

>
> Fixes: 8814c4b53381 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
> ---
>  net/ipv6/addrconf.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
> index 49cc6587dd77..63d33b29ad21 100644
> --- a/net/ipv6/addrconf.c
> +++ b/net/ipv6/addrconf.c
> @@ -3757,6 +3757,7 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
>                 idev->dead = 1;
>
>                 /* protected by rtnl_lock */
> +               synchronize_net();

I do not think we want yet another expensive synchronize_net(),
especially  before setting ip6_ptr to NULL



>                 RCU_INIT_POINTER(dev->ip6_ptr, NULL);
>
>                 /* Step 1.5: remove snmp6 entry */
> --
> 2.25.1
>

Re: [net] ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

[Ziyang Xuan (William)]

> On Fri, Jul 22, 2022 at 9:42 AM Ziyang Xuan
> <william.xuanziyang@huawei.com> wrote:
>>
>> Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
>> device while matching route. That may trigger null-ptr-deref bug
>> for ip6_ptr probability as following.
>>
>> Reproducer as following:
>> Firstly, prepare conditions:
>> $ip netns add ns1
>> $ip netns add ns2
>> $ip link add veth1 type veth peer name veth2
>> $ip link set veth1 netns ns1
>> $ip link set veth2 netns ns2
>> $ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
>> $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
>> $ip netns exec ns1 ifconfig veth1 up
>> $ip netns exec ns2 ifconfig veth2 up
>> $ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
>> $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
>>
>> Secondly, execute the following two commands in two ssh windows
>> respectively:
>> $ip netns exec ns1 sh
>> $while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
>>
>> $ip netns exec ns1 sh
>> $while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
>>
>> And in order to increase the probability of reproduce,
>> we can add mdelay() in find_match() as following:
>>
>> static bool find_match(struct fib6_nh *nh, u32 fib6_flags,
>>         if (nh->fib_nh_flags & RTNH_F_DEAD)
>>                 goto out;
>>
>> +       mdelay(1000);
> 
> But adding a mdelay() in an rcu_read_lock() should not be possible.
> 
> I guess this means _this_ function is not properly using rcu protection.

This just to increase the probability during reproducing.

The problem needs ip6_ptr assigned to NULL in addrconf_ifdown() firstly,
then accesses ip6_ptr without any NULL check in ip6_ignore_linkdown().

	cpu0						cpu1
fib6_table_lookup [ under rcu_read_lock() ]
__find_rr_leaf [ traverse fib6_info list ]
						addrconf_notify [ NETDEV_CHANGEMTU ]
						addrconf_ifdown
						RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown

static inline bool ip6_ignore_linkdown(const struct net_device *dev)
{
	const struct inet6_dev *idev = __in6_dev_get(dev);

	// without NULL check, access idev directly. If idev is NULL, null-ptr-deref occur.
	return !!idev->cnf.ignore_routes_with_linkdown;
}

> 
>>         if (ip6_ignore_linkdown(nh->fib_nh_dev) &&
>>             nh->fib_nh_flags & RTNH_F_LINKDOWN &&
>>             !(strict & RT6_LOOKUP_F_IGNORE_LINKSTATE))
>>
>> =========================================================
>> BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
>> Read of size 4 at addr 0000000000000308 by task ping6/263
>>
>> CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
>> Call trace:
>>  dump_backtrace+0x1a8/0x230
>>  show_stack+0x20/0x70
>>  dump_stack_lvl+0x68/0x84
>>  print_report+0xc4/0x120
>>  kasan_report+0x84/0x120
>>  __asan_load4+0x94/0xd0
>>  find_match.part.0+0x70/0x134
>>  __find_rr_leaf+0x408/0x470
>>  fib6_table_lookup+0x264/0x540
>>  ip6_pol_route+0xf4/0x260
>>  ip6_pol_route_output+0x58/0x70
>>  fib6_rule_lookup+0x1a8/0x330
>>  ip6_route_output_flags_noref+0xd8/0x1a0
>>  ip6_route_output_flags+0x58/0x160
>>  ip6_dst_lookup_tail+0x5b4/0x85c
>>  ip6_dst_lookup_flow+0x98/0x120
>>  rawv6_sendmsg+0x49c/0xc70
>>  inet_sendmsg+0x68/0x94
>>  sock_sendmsg+0x8c/0xb0
>>
>> It is because ip6_ptr has been assigned to NULL in addrconf_ifdown(),
>> and ip6_ignore_linkdown() in find_match() accesses ip6_ptr directly.
>> Although find_match() routine is under rcu_read_lock(), but there is
>> not synchronize_net() before assign NULL to make rcu grace period end.
>>
> 
> This is not how RCU works.
> 
>> So we can add synchronize_net() before assign ip6_ptr to NULL in
>> addrconf_ifdown() to fix the null-ptr-deref bug.
> 
> This does not make sense to me.
> 
>>
>> Fixes: 8814c4b53381 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
>> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
>> ---
>>  net/ipv6/addrconf.c | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
>> index 49cc6587dd77..63d33b29ad21 100644
>> --- a/net/ipv6/addrconf.c
>> +++ b/net/ipv6/addrconf.c
>> @@ -3757,6 +3757,7 @@ static int addrconf_ifdown(struct net_device *dev, bool unregister)
>>                 idev->dead = 1;
>>
>>                 /* protected by rtnl_lock */
>> +               synchronize_net();
> 
> I do not think we want yet another expensive synchronize_net(),
> especially  before setting ip6_ptr to NULL

Maybe the following solution can be considered.

diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index f7506f08e505..c04f359655b8 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -405,6 +405,9 @@ static inline bool ip6_ignore_linkdown(const struct net_device *dev)
 {
        const struct inet6_dev *idev = __in6_dev_get(dev);

+       if (unlikely(!idev))
+               return true;
+
        return !!idev->cnf.ignore_routes_with_linkdown;
 }

> 
> 
> 
>>                 RCU_INIT_POINTER(dev->ip6_ptr, NULL);
>>
>>                 /* Step 1.5: remove snmp6 entry */
>> --
>> 2.25.1
>>
> .
>