* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2004-11-09 17:28 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2004-11-09 17:28 UTC (permalink / raw)
To: alsa-devel
A new RELATIONSHIP has been added to the following issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 2
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 11-07-2004 21:41 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2005-05-31 16:03 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-05-31 16:03 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: closed
Distribution: Fedora Core 2
Kernel Version: 2.6.9
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 05-31-2005 18:03 CEST
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
----------------------------------------------------------------------
betak - 11-09-04 20:12
----------------------------------------------------------------------
cd /usr/src
tar xvjf alsa-driver-1.0.7rc2.tar.bz2
./configure --with-kernel=/mnt/hda14/usr.src.hda17/linux-2.6.9
make
make install
./snddevices
less /proc/config.gz attached
----------------------------------------------------------------------
jdthood - 03-19-05 12:57
----------------------------------------------------------------------
This is merged with a resolved issue. It should also be marked "resolved".
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
11-09-04 18:37 tiwai Note Added: 0002331
11-09-04 20:12 betak Note Added: 0002350
11-09-04 20:13 betak File Added: proc.config.gx
03-19-05 12:57 jdthood Note Added: 0004043
03-22-05 15:07 jdthood Status new => resolved
03-22-05 15:07 jdthood Resolution open => fixed
05-31-05 18:03 perex Status resolved => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2005-03-22 14:07 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-22 14:07 UTC (permalink / raw)
To: alsa-devel
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: resolved
Distribution: Fedora Core 2
Kernel Version: 2.6.9
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 03-22-2005 15:07 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
----------------------------------------------------------------------
betak - 11-09-04 20:12
----------------------------------------------------------------------
cd /usr/src
tar xvjf alsa-driver-1.0.7rc2.tar.bz2
./configure --with-kernel=/mnt/hda14/usr.src.hda17/linux-2.6.9
make
make install
./snddevices
less /proc/config.gz attached
----------------------------------------------------------------------
jdthood - 03-19-05 12:57
----------------------------------------------------------------------
This is merged with a resolved issue. It should also be marked "resolved".
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
11-09-04 18:37 tiwai Note Added: 0002331
11-09-04 20:12 betak Note Added: 0002350
11-09-04 20:13 betak File Added: proc.config.gx
03-19-05 12:57 jdthood Note Added: 0004043
03-22-05 15:07 jdthood Status new => resolved
03-22-05 15:07 jdthood Resolution open => fixed
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2005-03-19 11:57 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-19 11:57 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 2
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 03-19-2005 12:57 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
----------------------------------------------------------------------
betak - 11-09-04 20:12
----------------------------------------------------------------------
cd /usr/src
tar xvjf alsa-driver-1.0.7rc2.tar.bz2
./configure --with-kernel=/mnt/hda14/usr.src.hda17/linux-2.6.9
make
make install
./snddevices
less /proc/config.gz attached
----------------------------------------------------------------------
jdthood - 03-19-05 12:57
----------------------------------------------------------------------
This is merged with a resolved issue. It should also be marked "resolved".
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
11-09-04 18:37 tiwai Note Added: 0002331
11-09-04 20:12 betak Note Added: 0002350
11-09-04 20:13 betak File Added: proc.config.gx
03-19-05 12:57 jdthood Note Added: 0004043
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2004-11-09 19:12 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2004-11-09 19:12 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 2
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 11-09-2004 20:12 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
----------------------------------------------------------------------
tiwai - 11-09-04 18:37
----------------------------------------------------------------------
The unknown symbol is weird. How did you install the ALSA system?
----------------------------------------------------------------------
betak - 11-09-04 20:12
----------------------------------------------------------------------
cd /usr/src
tar xvjf alsa-driver-1.0.7rc2.tar.bz2
./configure --with-kernel=/mnt/hda14/usr.src.hda17/linux-2.6.9
make
make install
./snddevices
less /proc/config.gz attached
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
11-09-04 18:37 tiwai Note Added: 0002331
11-09-04 20:12 betak Note Added: 0002350
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2004-11-09 17:37 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2004-11-09 17:37 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 2
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 11-09-2004 18:37 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
has duplicate 0000634 Unknown symbol snd_verbode_printk, MC'9...
======================================================================
----------------------------------------------------------------------
tiwai - 11-09-04 18:37
----------------------------------------------------------------------
The unknown symbol is weird. How did you install the ALSA system?
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
11-09-04 18:28 tiwai Relationship added has duplicate 0000634
11-09-04 18:37 tiwai Note Added: 0002331
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1)
@ 2004-11-07 20:41 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2004-11-07 20:41 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=635>
======================================================================
Reported By: betak
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 635
Category: PCI - via82xx
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Fedora Core 2
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-07-2004 21:41 CET
Last Modified: 11-07-2004 21:41 CET
======================================================================
Summary: Unknown symbol snd_verbode_printk, MC'97 0
converters and GPIO not ready (0x1)
Description:
I tried to install kernel-2.6.9 with alsa-driver-1.0.7rc2. I use Fedora
Core 2 on my Fujitsu - Siemens Lifebook C1020 ( technical dokumentation -
see http://212.52.234.17/index.cfm?fuseaction=dspcontent&lid=11&page=2 )
When I try to load module snd_via82xx first , I am not able to load second
modul - snd_via82xx. I recieve following message "Unknown symbol
snd_verbode_printk" and modul is not loded.
But when I tried to load sdn_via82xx_modem first, then I recieve
following message "MC'97 0 converters and GPIO not ready (0x1)".
Snd_via82xx_modem is loaded , but I am not able to setup them.
Any useful information from my system are attached.
Can you help me to setup this modem driver ? How can I create /dev/modem
... ?
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
11-07-04 21:41 betak New Issue
11-07-04 21:41 betak File Added: alsa.txt
11-07-04 21:41 betak Distribution => Fedora Core 2
11-07-04 21:41 betak Kernel Version => 2.6.9
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-05-31 16:03 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-11-09 17:28 [ALSA - driver 0000635]: Unknown symbol snd_verbode_printk, MC'97 0 converters and GPIO not ready (0x1) bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 16:03 bugtrack
2005-03-22 14:07 bugtrack
2005-03-19 11:57 bugtrack
2004-11-09 19:12 bugtrack
2004-11-09 17:37 bugtrack
2004-11-07 20:41 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.