Re: [PATCH][2.6] Add command function to struct i2c_adapter

Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Jean Delvare]

Hi Michael,

See my various questions inline.

> the attached patch adds a command function to struct i2c_adapter,
> similar to the command function that is already there for struct
> i2c_client.

I didne't even know that. Is this command function in struct i2c_client used
somewhere? What for?

> The reason behind this is as follows:
> In the DVB subsystem, the tuners are accessed via normal kernel i2c
> drivers. One big problem is, that tuners can be wired very differently
> depending on the surrounding hardware. Currently, we need to keep
> specific settings which are unique to a hardware design in the
> independent i2c tuner driver. This is both very ugly and makes it
> impossible to support DVB drivers which are not in the official Linux
> kernel tree, but could otherwise use in-kernel frontend driver.

What is the i2c tuner driver "independent" of? Do you simply mean that it
holds the common code for all DVB adapters?

> If the struct i2c_adapter has a command function, it would be possible
> to get additional informations from the adapter in the i2c client's
> attach_adapter() function *before* probing the device and guessing
> things like i2c addresses or other hardware settings.

I see what you want to do, but I don't exactly see how it solves your problem.
Your new command callback function will provide an adapter-specific interface
to adapter internal data. You will have to fill the data before you can access
it, so there still is hardware-specific data involved. Is your point that this
data would be located in (and split among) adapter drivers instead of the
common tuner driver as is now?

I am interested in your proposal because we (the sensors side of the i2c bus)
are facing a similar problem with hardware monitoring chips on motherboads.
The same chip can be wired differently on various motherboads, and most of the
time there is no way to guess (either because the hardware just doesn't
provide any way, or because the BIOS failed to do its job properly). We have
not come to any solution yet, and most of the time users have to use
user-space tools (such as i2cset) prior to loading the drivers. Looks like the
problem you are dealing with is of similar nature.

My initial thoughts about this were that we could use DMI data and/or PCI
information to identify systems, and trigger motherboard-specific code
whenever needed. It's really just a wild guess, I don't know if it is the
correct way. Wouldn't it work for you as well?

I would appreciate if you could show us some (pseudo)code with explanations on
what you have for now, and what you would have after the change. I have some
difficulties to understand what the change would actually change, most
probably because the video and sensors sides of the i2c subsystem work rather
differently.

On a completely different matter, what about the i2c subsystem class flags and
checking mechanism? You had come with a first step some months ago (adding a
class member to i2c clients), and your proposal (generalized check of i2c
client class against adapter class) looked very good to me, but then we did
not finish the job. What about it? I am willing to help on the sensors front
if you are going into this again someday. If I remember correctly, step 2 was
about clearing manual class checks and filling all class members, and step 3
was about implementing the generalized check in i2c-core. Am I right?

Thanks.

-- 
Jean Delvare
http://khali.linux-fr.org/

Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Michael Hunold]

Hi,

(because I think this will be an in-depth discussion I trimmed the CC 
list a litte bit)

On 21.09.2004 15:28, Jean Delvare wrote:
>>the attached patch adds a command function to struct i2c_adapter,
>>similar to the command function that is already there for struct
>>i2c_client.

> I didne't even know that. Is this command function in struct i2c_client used
> somewhere? What for?

Please have a look at Video4Linux driver drivers/media/video/mxb.c. This 
driver needs various helper chipsets: tuner, tea6145c, tea6420, tda9840, 
saa7111.

For example the tea6415c is a simple video matrix chipset. If the user 
request a change of the input, the video matrix needs to be re-programmed.

For this, the tea6415 driver has the TEA6415C_SWITCH ioctl function, 
which is called through the i2c_client command() function.
 > mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);

Otherwise there would be no way the mxb driver could tell the tea6415c 
that the configuration should be changed.

>>The reason behind this is as follows:
>>In the DVB subsystem, the tuners are accessed via normal kernel i2c
>>drivers. One big problem is, that tuners can be wired very differently
>>depending on the surrounding hardware. Currently, we need to keep
>>specific settings which are unique to a hardware design in the
>>independent i2c tuner driver. This is both very ugly and makes it
>>impossible to support DVB drivers which are not in the official Linux
>>kernel tree, but could otherwise use in-kernel frontend driver.

> What is the i2c tuner driver "independent" of? Do you simply mean that it
> holds the common code for all DVB adapters?

The tuner is called frontend in dvb terms, because it holds more that 
just a simple tuner.

Some parts are hardware-independent and are in the right place in the 
frontend drivers. But manufacturers are free to use different plls (the 
actual tuners). Unfortunately, they nearly all sit on the same i2c 
address, are really dumb, write only and therefore not very distinguishable.

Currently the frontend drivers do a strcmp() on the adapter name. If it 
is "SkyStar2" for example, then it is a TechniSat card with a  Samsung 
TBMU24112IMB pll.

With that solution, it's not possible to support dvb drivers outside of 
the kernel which could theoretically use the in-kernel frontend drivers, 
because h/w dependend things need to coded into every frontend driver.

>>If the struct i2c_adapter has a command function, it would be possible
>>to get additional informations from the adapter in the i2c client's
>>attach_adapter() function *before* probing the device and guessing
>>things like i2c addresses or other hardware settings.

> I see what you want to do, but I don't exactly see how it solves your problem.
> Your new command callback function will provide an adapter-specific interface
> to adapter internal data.

Not adapter internal data, but frontend specific data, that only the 
manufacturer knows (which can be distinguished by subsystem pci ids).

 > You will have to fill the data before you can access
 > it, so there still is hardware-specific data involved. Is your point
 > that this
 > data would be located in (and split among) adapter drivers instead of
 > the
 > common tuner driver as is now?

Yes. With that approach, it's possible to support dvb drivers outside of 
the kernel, because all necessary information about the frontends is 
inside the dvb driver, not the frontend driver.

> I am interested in your proposal because we (the sensors side of the i2c bus)
> are facing a similar problem with hardware monitoring chips on motherboads.
> The same chip can be wired differently on various motherboads, and most of the
> time there is no way to guess (either because the hardware just doesn't
> provide any way, or because the BIOS failed to do its job properly). We have
> not come to any solution yet, and most of the time users have to use
> user-space tools (such as i2cset) prior to loading the drivers. Looks like the
> problem you are dealing with is of similar nature.

Yes, it's basically the same.

> My initial thoughts about this were that we could use DMI data and/or PCI
> information to identify systems, and trigger motherboard-specific code
> whenever needed. It's really just a wild guess, I don't know if it is the
> correct way. Wouldn't it work for you as well?

This is how it will work. In our case, we only need pci ids, but it's 
possible to use other information sources as well.

Let's say the user loads the stv0299 frontend driver and later the 
dvb-ttpci device driver.

The dvb-ttpci driver exports an i2c_adapter, the stv0299 
i2c_attach_adapter() function will be called. Ideally, if this isn't a 
bus from the digitial tv subsystem, then bail out (This needs to be 
implemented, see below).

If we are on a digital tv i2c bus the stv0299 uses the i2c adapter 
command() callback and asks the i2c adapter, if this frontend can be on 
that bus at all and asks for further informations.

dvb-ttpci knows the pci ids and can tell different hardware versions. 
For example, cable dvb cards have different pci ids than satellite dvb 
cards. The stv0299 is a satellite frontend, so if the bus is on a dvb 
cable card then dvb-ttpci can simply tell the stv0299 driver not to do 
anything.

If the stv0299 can be found on that system in theory, either the correct 
hardware stv0299 dependent informations are supplied completely or 
probing informations are supplied.

> I would appreciate if you could show us some (pseudo)code with explanations on
> what you have for now, and what you would have after the change. I have some
> difficulties to understand what the change would actually change, most
> probably because the video and sensors sides of the i2c subsystem work rather
> differently.

Please have a look at drivers/media/dvb/frontends/stv0299.c

At the top you'll notice a lot of defines:
#define PHILIPS_SU1278_TUA      3 // SU1278 with TUA6100 synth

In lots of functions there are switch/case statements to distinguish 
different plls, for example in pll_set_tv_freq().  stv0299_init() is 
ugly, too. The init-data for different hardware is hardcoded into the 
frontend driver. *shiver*

With the command() function, probe_tuner() with the ugly strcmp() stuff 
and i2c probing can be killed completely.

In other places, common i2c_adapter commands can be used to pull 
frontend device specific data from the dvb device (for example frequency 
boundaries) or trigger h/w dependend thinks that only the dvb driver 
knows, like setting a frequency in the pll with command(SET_PLL).

Sorry, I just have some proof-of-concept code, that doesn't use all the 
things I explained above. Some dvb people would like to give up the 
strong separation due to the kernel i2c interface and have something 
more "dvbish".

> On a completely different matter, what about the i2c subsystem class flags and
> checking mechanism? You had come with a first step some months ago (adding a
> class member to i2c clients), and your proposal (generalized check of i2c
> client class against adapter class) looked very good to me, but then we did
> not finish the job. What about it? I am willing to help on the sensors front
> if you are going into this again someday. If I remember correctly, step 2 was
> about clearing manual class checks and filling all class members, and step 3
> was about implementing the generalized check in i2c-core. Am I right?

I'll answer that in a separate mail.

> Thanks.

CU
Michael.

Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Michael Hunold]

[-- Attachment #1: Type: text/plain, Size: 2992 bytes --]

Hi,

On 21.09.2004 15:28, Jean Delvare wrote:
> On a completely different matter, what about the i2c subsystem class flags and
> checking mechanism? You had come with a first step some months ago (adding a
> class member to i2c clients), and your proposal (generalized check of i2c
> client class against adapter class) looked very good to me, but then we did
> not finish the job. What about it? 

I was unsure about the .class entries for some of the clients, then 
didn't find the time to investigate further and from then on the patches 
are bit-rotting on my harddisc. ;-(

> I am willing to help on the sensors front
> if you are going into this again someday. If I remember correctly, step 2 was
> about clearing manual class checks and filling all class members, and step 3
> was about implementing the generalized check in i2c-core. Am I right?

Yes, right. I've cleaned up the patches and attached them to this mail. 
Unfortunately, they only apply to 2.6.8(.1), but not 2.6.9-rc2-mm1. This 
is because SMBUS has been renamed to HWMON IIRC.

Please have a look and tell me what you think. The big problem will be, 
that we cannot test all configurations, so it's possible that some 
devices won't be recognized anymore, because the .class entries don't match.

Patches 1-3 are straight forward. For patches 4-7 I once created the 
following list:

==>4
#drivers/ieee1394/pcilynx.c => I2C_CLASS_NONE
#drivers/macintosh/therm_adt746x.c => I2C_CLASS_HWMON
#drivers/macintosh/therm_pm72.c => I2C_CLASS_HWMON
#drivers/macintosh/therm_windtunnel.c => I2C_CLASS_HWMON
#drivers/acorn/char/pcf8583.c => I2C_CLASS_ALL
#drivers/acorn/char/i2c.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-keywest.c: => I2C_CLASS_HWMON | I2C_CLASS_SOUND;
#sound/ppc/keywest.c => I2C_CLASS_SOUND
#sound/oss/dmasound/dac3550a.c => I2C_CLASS_SOUND
#sound/oss/dmasound/tas_common.c => I2C_CLASS_SOUND

==>5
#drivers/i2c/algos/i2c-algo-pcf.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-elektor.c => I2C_CLASS_ALL
#drivers/video/aty/radeon_i2c.c => I2C_CLASS_NONE
#drivers/video/matrox/i2c-matroxfb.c => I2C_CLASS_DDC and 
I2C_CLASS_TV_ANALOG
#drivers/video/matrox/matroxfb_maven.c => I2C_CLASS_TV_ANALOG
#drivers/media/video/zoran_card.c => I2C_CLASS_TV_ANALOG
#drivers/media/video/ir-kbd-i2c.c => I2C_CLASS_TV_ANALOG | 
I2C_CLASS_TV_DIGITAL
#drivers/media/dvb/bt8xx/dvb-bt8xx.c => I2C_CLASS_ALL

==>6
#drivers/i2c/busses/i2c-ibm_iic.c: => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-iop3xx.c:=> I2C_CLASS_ALL
#drivers/i2c/busses/scx200_i2c.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-ite.c => I2C_CLASS_ALL
(drivers/i2c/algos/i2c-algo-ite.c:)

==>7
#drivers/i2c/busses/i2c-frodo.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-i810.c => I2C_CLASS_ALL + I2C_CLASS_DDC
#drivers/i2c/busses/i2c-prosavage.c => I2C_CLASS_ALL + I2C_CLASS_DDC
#drivers/i2c/busses/i2c-savage4.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-ixp4xx.c => I2C_CLASS_ALL, doesn't compile!?
#drivers/i2c/busses/i2c-hydra.c => I2C_CLASS_HWMON

> Thanks.

CU
Michael.


[-- Attachment #2: 01-drivers-media-video.diff --]
[-- Type: text/plain, Size: 6901 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c	2004-05-09 11:28:12.000000000 +0200
@@ -516,6 +516,7 @@
 
 	.id = I2C_DRIVERID_ADV7170,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = adv7170_attach_adapter,
 	.detach_client = adv7170_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c	2004-05-09 11:27:55.000000000 +0200
@@ -538,6 +538,7 @@
 
 	.id = I2C_DRIVERID_ADV7175,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = adv7175_attach_adapter,
 	.detach_client = adv7175_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c	2004-05-09 11:24:22.000000000 +0200
@@ -642,6 +642,7 @@
 
 	.id = I2C_DRIVERID_BT819,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = bt819_attach_adapter,
 	.detach_client = bt819_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c	2004-05-09 11:23:22.000000000 +0200
@@ -423,6 +423,7 @@
 
 	.id = I2C_DRIVERID_BT856,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = bt856_attach_adapter,
 	.detach_client = bt856_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c	2004-05-09 11:22:57.000000000 +0200
@@ -599,6 +599,7 @@
 
 	.id = I2C_DRIVERID_SAA7110,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7110_attach_adapter,
 	.detach_client = saa7110_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c	2004-05-09 11:06:43.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c	2004-05-09 11:24:54.000000000 +0200
@@ -608,7 +608,8 @@
 
 	.id = I2C_DRIVERID_SAA7111A,
 	.flags = I2C_DF_NOTIFY,
-
+	.class = I2C_CLASS_TV_ANALOG,
+	
 	.attach_adapter = saa7111_attach_adapter,
 	.detach_client = saa7111_detach_client,
 	.command = saa7111_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c	2004-05-09 11:27:15.000000000 +0200
@@ -1222,6 +1222,7 @@
 
 	.id = I2C_DRIVERID_SAA7114,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7114_attach_adapter,
 	.detach_client = saa7114_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c	2004-05-09 11:23:55.000000000 +0200
@@ -505,6 +505,7 @@
 
 	.id = I2C_DRIVERID_SAA7185B,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7185_attach_adapter,
 	.detach_client = saa7185_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c	2004-05-09 11:26:35.000000000 +0200
@@ -263,6 +263,7 @@
 	.name		= "tda9840 driver",
 	.id		= I2C_DRIVERID_TDA9840,
 	.flags		= I2C_DF_NOTIFY,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tda9840_attach,
         .detach_client	= tda9840_detach,
         .command	= tda9840_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c	2004-05-09 11:26:52.000000000 +0200
@@ -212,6 +212,7 @@
 	.name		= "tea6415c driver",
 	.id		= I2C_DRIVERID_TEA6415C,
 	.flags		= I2C_DF_NOTIFY,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tea6415c_attach,
         .detach_client	= tea6415c_detach,
         .command	= tea6415c_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c	2004-05-09 11:26:09.000000000 +0200
@@ -192,8 +192,9 @@
 	.name		= "tea6420 driver",
 	.id		= I2C_DRIVERID_TEA6420,
 	.flags		= I2C_DF_NOTIFY,
-        .attach_adapter = tea6420_attach,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
+	.attach_adapter = tea6420_attach,
         .detach_client	= tea6420_detach,
         .command	= tea6420_command,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c	2004-05-09 11:25:25.000000000 +0200
@@ -185,6 +185,7 @@
 	.name		=	"sab3036",
 	.id		=	I2C_DRIVERID_SAB3036,
         .flags		=	I2C_DF_NOTIFY,
+	.class 		=	I2C_CLASS_TV_ANALOG,
 	.attach_adapter =	tuner_probe,
 	.detach_client  =	tuner_detach,
 	.command	=	tuner_command
@@ -200,8 +201,7 @@
 int __init
 tuner3036_init(void)
 {
-	i2c_add_driver(&i2c_driver_tuner);
-	return 0;
+	return i2c_add_driver(&i2c_driver_tuner);
 }
 
 void __exit
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c	2004-05-09 11:27:33.000000000 +0200
@@ -731,6 +731,7 @@
 
 	.id = I2C_DRIVERID_VPX3220,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = vpx3220_attach_adapter,
 	.detach_client = vpx3220_detach_client,

[-- Attachment #3: 02-drivers-media-video-2.diff --]
[-- Type: text/plain, Size: 13142 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c	2004-05-09 14:49:58.000000000 +0200
@@ -197,9 +197,7 @@
 
 static int bt832_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, bt832_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, bt832_attach);
 }
 
 static int bt832_detach(struct i2c_client *client)
@@ -243,6 +241,7 @@
         .name           = "i2c bt832 driver",
         .id             = -1, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = bt832_probe,
         .detach_client  = bt832_detach,
         .command        = bt832_command,
@@ -257,8 +256,7 @@
 
 int bt832_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void bt832_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c	2004-05-09 14:48:30.000000000 +0200
@@ -1222,6 +1222,7 @@
         .name           = "i2c msp3400 driver",
         .id             = I2C_DRIVERID_MSP3400,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = msp_probe,
         .detach_client  = msp_detach,
         .command        = msp_command,
@@ -1353,19 +1354,7 @@
 
 static int msp_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, msp_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	//case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, msp_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, msp_attach);
 }
 
 static void msp_wake_thread(struct i2c_client *client)
@@ -1558,8 +1547,7 @@
 
 static int msp3400_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void msp3400_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c	2004-05-09 14:52:53.000000000 +0200
@@ -143,9 +143,7 @@
  */
 static int saa5246a_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa5246a_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa5246a_attach);
 }
 
 static int saa5246a_detach(struct i2c_client *client)
@@ -174,6 +172,7 @@
 	.name 		= IF_NAME,		/* name */
 	.id 		= I2C_DRIVERID_SAA5249, /* in i2c.h */
 	.flags 		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = saa5246a_probe,
 	.detach_client  = saa5246a_detach,
 	.command 	= saa5246a_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c	2004-05-09 14:50:30.000000000 +0200
@@ -219,9 +219,7 @@
  
 static int saa5249_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa5249_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa5249_attach);
 }
 
 static int saa5249_detach(struct i2c_client *client)
@@ -249,6 +247,7 @@
 	.name 		= IF_NAME,		/* name */
 	.id 		= I2C_DRIVERID_SAA5249, /* in i2c.h */
 	.flags 		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = saa5249_probe,
 	.detach_client  = saa5249_detach,
 	.command 	= saa5249_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c	2004-05-09 14:47:01.000000000 +0200
@@ -335,9 +335,7 @@
 
 static int saa6752hs_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa6752hs_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa6752hs_attach);
 }
 
 static int saa6752hs_detach(struct i2c_client *client)
@@ -376,6 +373,7 @@
         .name           = "i2c saa6752hs MPEG encoder",
         .id             = I2C_DRIVERID_SAA6752HS,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = saa6752hs_probe,
         .detach_client  = saa6752hs_detach,
         .command        = saa6752hs_command,
@@ -390,8 +388,7 @@
 
 static int saa6752hs_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void saa6752hs_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c	2004-05-09 14:49:17.000000000 +0200
@@ -338,14 +338,7 @@
 
 static int tda7432_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda7432_attach);
-#else
-	if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
-		return i2c_probe(adap, &addr_data, tda7432_attach);
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda7432_attach);
 }
 
 static int tda7432_detach(struct i2c_client *client)
@@ -520,6 +513,7 @@
         .name            = "i2c tda7432 driver",
 	.id              = I2C_DRIVERID_TDA7432,
         .flags           = I2C_DF_NOTIFY,
+	.class		 = I2C_CLASS_TV_ANALOG,
 	.attach_adapter  = tda7432_probe,
         .detach_client   = tda7432_detach,
         .command         = tda7432_command,
@@ -538,8 +532,7 @@
 		printk(KERN_ERR "tda7432: loudness parameter must be between 0 and 15\n");
 		return -EINVAL;
 	}
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda7432_fini(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c	2004-05-09 14:48:00.000000000 +0200
@@ -272,14 +272,7 @@
 
 static int tda9875_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda9875_attach);
-#else
-	if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
-		return i2c_probe(adap, &addr_data, tda9875_attach);
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda9875_attach);
 }
 
 static int tda9875_detach(struct i2c_client *client)
@@ -391,6 +384,7 @@
         .name           = "i2c tda9875 driver",
         .id             = I2C_DRIVERID_TDA9875,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = tda9875_probe,
         .detach_client  = tda9875_detach,
         .command        = tda9875_command,
@@ -405,8 +399,7 @@
 
 static int tda9875_init(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda9875_fini(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c	2004-05-09 14:46:31.000000000 +0200
@@ -370,19 +370,7 @@
 
 static int tda9887_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda9887_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, tda9887_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda9887_attach);
 }
 
 static int tda9887_detach(struct i2c_client *client)
@@ -447,6 +435,7 @@
         .name           = "i2c tda9887 driver",
         .id             = -1, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tda9887_probe,
         .detach_client  = tda9887_detach,
         .command        = tda9887_command,
@@ -460,8 +449,7 @@
 
 static int tda9887_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda9887_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c	2004-05-09 14:51:10.000000000 +0200
@@ -1067,21 +1067,7 @@
 	}
 	this_adap = 0;
 
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tuner_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-	case I2C_ALGO_SAA7146:
-		return i2c_probe(adap, &addr_data, tuner_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tuner_attach);
 }
 
 static int tuner_detach(struct i2c_client *client)
@@ -1184,6 +1170,7 @@
         .name           = "i2c TV tuner driver",
         .id             = I2C_DRIVERID_TUNER,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tuner_probe,
         .detach_client  = tuner_detach,
         .command        = tuner_command,
@@ -1197,8 +1184,7 @@
 
 static int tuner_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tuner_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c	2004-05-09 14:47:38.000000000 +0200
@@ -1497,18 +1497,7 @@
 
 static int chip_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, chip_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, chip_attach);
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, chip_attach);
 }
 
 static int chip_detach(struct i2c_client *client)
@@ -1639,6 +1628,7 @@
         .name            = "generic i2c audio driver",
         .id              = I2C_DRIVERID_TVAUDIO,
         .flags           = I2C_DF_NOTIFY,
+	.class		 = I2C_CLASS_TV_ANALOG,
         .attach_adapter  = chip_probe,
         .detach_client   = chip_detach,
         .command         = chip_command,
@@ -1659,8 +1649,7 @@
 	for (desc = chiplist; desc->name != NULL; desc++)
 		printk("%s%s", (desc == chiplist) ? "" : ",",desc->name);
 	printk("\n");
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void audiochip_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c	2004-05-09 14:52:10.000000000 +0200
@@ -232,6 +232,7 @@
 	.flags           = I2C_DF_NOTIFY,
         .detach_adapter  = tvmixer_adapters,
 #endif
+	.class		 = I2C_CLASS_TV_ANALOG,
         .attach_adapter  = tvmixer_adapters,
         .detach_client   = tvmixer_clients,
 };
@@ -263,23 +264,6 @@
 	struct video_audio va;
 	int i,minor;
 
-#ifdef I2C_CLASS_TV_ANALOG
-	if (!(client->adapter->class & I2C_CLASS_TV_ANALOG))
-		return -1;
-#else
-	/* TV card ??? */
-	switch (client->adapter->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-		/* ok, have a look ... */
-		break;
-	default:
-		/* ignore that one */
-		return -1;
-	}
-#endif
-
 	/* unregister ?? */
 	for (i = 0; i < DEV_MAX; i++) {
 		if (devices[i].dev == client) {
@@ -334,8 +318,7 @@
 	
 	for (i = 0; i < DEV_MAX; i++)
 		devices[i].minor = -1;
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tvmixer_cleanup_module(void)

[-- Attachment #4: 03-drivers-i2c-chips.diff --]
[-- Type: text/plain, Size: 12163 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c	2004-05-09 16:17:00.000000000 +0200
@@ -144,6 +144,7 @@
 	.name		= "adm1021",
 	.id		= I2C_DRIVERID_ADM1021,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= adm1021_attach_adapter,
 	.detach_client	= adm1021_detach_client,
 };
@@ -200,8 +201,6 @@
 
 static int adm1021_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, adm1021_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c	2004-05-09 16:13:42.000000000 +0200
@@ -233,6 +233,7 @@
 	.name		= "asb100",
 	.id		= I2C_DRIVERID_ASB100,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= asb100_attach_adapter,
 	.detach_client	= asb100_detach_client,
 };
@@ -609,8 +610,6 @@
  */
 static int asb100_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, asb100_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c	2004-05-09 16:11:42.000000000 +0200
@@ -92,6 +92,7 @@
 	.name		= "ds1621",
 	.id		= I2C_DRIVERID_DS1621,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= ds1621_attach_adapter,
 	.detach_client	= ds1621_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c	2004-05-09 16:11:59.000000000 +0200
@@ -82,6 +82,7 @@
 	.name		= "eeprom",
 	.id		= I2C_DRIVERID_EEPROM,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= eeprom_attach_adapter,
 	.detach_client	= eeprom_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c	2004-05-09 16:13:00.000000000 +0200
@@ -124,6 +124,7 @@
 	.name		= "fscher",
 	.id		= I2C_DRIVERID_FSCHER,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= fscher_attach_adapter,
 	.detach_client	= fscher_detach_client,
 };
@@ -293,8 +294,6 @@
 
 static int fscher_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, fscher_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c	2004-05-09 16:12:21.000000000 +0200
@@ -156,6 +156,7 @@
 	.name		= "gl518sm",
 	.id		= I2C_DRIVERID_GL518,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= gl518_attach_adapter,
 	.detach_client	= gl518_detach_client,
 };
@@ -335,8 +336,6 @@
 
 static int gl518_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, gl518_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c	2004-05-09 16:16:14.000000000 +0200
@@ -173,6 +173,7 @@
 	.name		= "it87",
 	.id		= I2C_DRIVERID_IT87,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= it87_attach_adapter,
 	.detach_client	= it87_detach_client,
 };
@@ -500,8 +501,6 @@
      * when a new adapter is inserted (and it87_driver is still present) */
 static int it87_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, it87_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c	2004-05-09 16:15:57.000000000 +0200
@@ -229,6 +229,7 @@
 	.name		= "lm78",
 	.id		= I2C_DRIVERID_LM78,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm78_attach_adapter,
 	.detach_client	= lm78_detach_client,
 };
@@ -488,8 +489,6 @@
      * when a new adapter is inserted (and lm78_driver is still present) */
 static int lm78_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm78_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c	2004-05-09 16:15:28.000000000 +0200
@@ -156,6 +156,7 @@
 	.name		= "lm80",
 	.id		= I2C_DRIVERID_LM80,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm80_attach_adapter,
 	.detach_client	= lm80_detach_client,
 };
@@ -376,8 +377,6 @@
 
 static int lm80_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm80_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c	2004-05-09 16:15:08.000000000 +0200
@@ -125,6 +125,7 @@
 	.name		= "lm83",
 	.id		= I2C_DRIVERID_LM83,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm83_attach_adapter,
 	.detach_client	= lm83_detach_client,
 };
@@ -216,8 +217,6 @@
 
 static int lm83_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm83_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c	2004-05-09 16:14:53.000000000 +0200
@@ -403,6 +403,7 @@
 	.name           = "lm85",
 	.id             = I2C_DRIVERID_LM85,
 	.flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter = lm85_attach_adapter,
 	.detach_client  = lm85_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c	2004-05-09 16:14:33.000000000 +0200
@@ -146,6 +146,7 @@
 	.name		= "lm90",
 	.id		= I2C_DRIVERID_LM90,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm90_attach_adapter,
 	.detach_client	= lm90_detach_client,
 };
@@ -274,8 +275,6 @@
 
 static int lm90_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm90_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c	2004-05-09 16:10:36.000000000 +0200
@@ -73,6 +73,7 @@
 	.name		= "pcf8574",
 	.id		= I2C_DRIVERID_PCF8574,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= pcf8574_attach_adapter,
 	.detach_client	= pcf8574_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c	2004-05-09 16:10:09.000000000 +0200
@@ -95,6 +95,7 @@
 	.name		= "pcf8591",
 	.id		= I2C_DRIVERID_PCF8591,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= pcf8591_attach_adapter,
 	.detach_client	= pcf8591_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c	2004-05-09 16:16:46.000000000 +0200
@@ -586,6 +586,7 @@
 	.name		= "via686a",
 	.id		= I2C_DRIVERID_VIA686A,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= via686a_attach_adapter,
 	.detach_client	= via686a_detach_client,
 };
@@ -594,8 +595,6 @@
 /* This is called when the module is loaded */
 static int via686a_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, via686a_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c	2004-05-09 16:11:27.000000000 +0200
@@ -331,6 +331,7 @@
 	.name		= "w83627hf",
 	.id		= I2C_DRIVERID_W83627HF,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= w83627hf_attach_adapter,
 	.detach_client	= w83627hf_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c	2004-05-09 16:17:18.000000000 +0200
@@ -281,6 +281,7 @@
 	.name = "w83781d",
 	.id = I2C_DRIVERID_W83781D,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_HWMON,
 	.attach_adapter = w83781d_attach_adapter,
 	.detach_client = w83781d_detach_client,
 };
@@ -905,8 +906,6 @@
 static int
 w83781d_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, w83781d_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c	2004-05-09 16:13:22.000000000 +0200
@@ -96,6 +96,7 @@
 	.name		= "w83l785ts",
 	.id		= I2C_DRIVERID_W83L785TS,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= w83l785ts_attach_adapter,
 	.detach_client	= w83l785ts_detach_client,
 };
@@ -145,8 +146,6 @@
 
 static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, w83l785ts_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c	2004-05-09 16:06:33.000000000 +0200
@@ -500,6 +500,7 @@
 	.name		= "dev_driver",
 	.id		= I2C_DRIVERID_I2CDEV,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_ALL,
 	.attach_adapter	= i2cdev_attach_adapter,
 	.detach_adapter	= i2cdev_detach_adapter,
 	.detach_client	= i2cdev_detach_client,

[-- Attachment #5: 04-misc.diff --]
[-- Type: text/plain, Size: 6029 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c	2004-05-09 16:31:58.000000000 +0200
@@ -345,6 +345,7 @@
 static struct i2c_adapter ioc_ops = {
 	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
+	.class			= I2C_CLASS_ALL,
 	.client_register	= ioc_client_reg,
 	.client_unregister	= ioc_client_unreg,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c
--- xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c	2004-05-09 16:33:20.000000000 +0200
@@ -227,6 +227,7 @@
 	.name		= "PCF8583",
 	.id		= I2C_DRIVERID_PCF8583,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_ALL, /* fixme: add another I2C_CLASS_xxx entry for Acorn? */
 	.attach_adapter	= pcf8583_probe,
 	.detach_client	= pcf8583_detach,
 	.command	= pcf8583_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c	2004-05-09 16:37:41.000000000 +0200
@@ -619,6 +619,7 @@
 		chan->iface = iface;
 		chan->chan_no = i;
 		chan->adapter.id = I2C_ALGO_SMBUS;
+		chan->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SOUND;
 		chan->adapter.algo = &keywest_algorithm;
 		chan->adapter.algo_data = NULL;
 		chan->adapter.client_register = NULL;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c	2004-05-09 11:05:30.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c	2004-05-09 16:42:30.000000000 +0200
@@ -1799,6 +1799,7 @@
                 i2c_adapter = bit_ops;
                 i2c_adapter_data = bit_data;
                 i2c_adapter.algo_data = &i2c_adapter_data;
+		i2c_adapter.class = I2C_CLASS_NONE;
                 i2c_adapter_data.data = lynx;
 
 		PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d",
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c	2004-05-09 16:30:02.000000000 +0200
@@ -164,6 +164,7 @@
 	.name		="Apple Thermostat ADT746x",
 	.id		=0xDEAD7467,
 	.flags		=I2C_DF_NOTIFY,
+	.class		=I2C_CLASS_HWMON,
 	.attach_adapter	=&attach_thermostat,
 	.detach_adapter	=&detach_thermostat,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c	2004-05-09 16:29:32.000000000 +0200
@@ -142,6 +142,7 @@
 	.name		= "therm_pm72",
 	.id		= 0xDEADBEEF,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= therm_pm72_attach,
 	.detach_adapter	= therm_pm72_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c	2004-05-09 16:29:13.000000000 +0200
@@ -357,6 +357,7 @@
 	.name		= "Apple G4 Thermostat/Fan",
 	.id		= I2C_DRIVERID_G4FAN,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter = &do_attach,
 	.detach_client	= &do_detach,
 	.command	= NULL,
diff -ura xx-linux-2.6-6-rc3-mm2/include/linux/i2c.h linux-2.6-6-rc3-mm2/include/linux/i2c.h
--- xx-linux-2.6-6-rc3-mm2/include/linux/i2c.h	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/include/linux/i2c.h	2004-05-09 16:42:13.000000000 +0200
@@ -285,7 +285,8 @@
 #define I2C_CLIENT_TEN	0x10			/* we have a ten bit chip address	*/
 						/* Must equal I2C_M_TEN below */
 
-/* i2c adapter classes (bitmask) */
+/* i2c classes (bitmask) */
+#define I2C_CLASS_NONE		0	/* none, don't use */
 #define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
 #define I2C_CLASS_TV_ANALOG	(1<<1)	/* bttv + friends */
 #define I2C_CLASS_TV_DIGITAL	(1<<2)	/* dvb cards */
diff -ura xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c
--- xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c	2004-05-09 11:04:50.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c	2004-05-09 16:38:47.000000000 +0200
@@ -47,6 +47,7 @@
 	.name			= "DAC3550A driver  V " DACA_VERSION,
 	.id			= I2C_DRIVERID_DACA,
 	.flags			= I2C_DF_NOTIFY,
+	.class			= I2C_CLASS_SOUND,
 	.attach_adapter		= daca_attach_adapter,
 	.detach_client		= daca_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c
--- xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c	2004-05-09 11:04:50.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c	2004-05-09 16:39:01.000000000 +0200
@@ -50,6 +50,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "tas",
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_SOUND,
 	.attach_adapter	= tas_attach_adapter,
 	.detach_client	= tas_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/sound/ppc/keywest.c linux-2.6-6-rc3-mm2/sound/ppc/keywest.c
--- xx-linux-2.6-6-rc3-mm2/sound/ppc/keywest.c	2004-05-09 11:06:53.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/ppc/keywest.c	2004-05-09 16:38:03.000000000 +0200
@@ -44,6 +44,7 @@
 	.name = "PMac Keywest Audio",
 	.id = I2C_DRIVERID_KEYWEST,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_SOUND,
 	.attach_adapter = &keywest_attach_adapter,
 	.detach_client = &keywest_detach_client,
 };

[-- Attachment #6: 05-unclear.diff --]
[-- Type: text/plain, Size: 6322 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c	2004-05-09 18:00:47.000000000 +0200
@@ -449,7 +449,8 @@
 
 	adap->id |= pcf_algo.id;
 	adap->algo = &pcf_algo;
-
+	adap->class = I2C_CLASS_ALL;
+	
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c	2004-05-09 17:57:16.000000000 +0200
@@ -171,6 +171,7 @@
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
+	.class		= I2C_CLASS_ALL,
 	.name		= "PCF8584 ISA adapter",
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2004-05-09 11:05:31.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2004-05-09 17:38:16.000000000 +0200
@@ -261,6 +261,11 @@
 	.name            = "dvb_bt8xx",
         .id              = I2C_DRIVERID_DVB_BT878A,
 	.flags           = I2C_DF_NOTIFY,
+	/* ugly, but necessary: bt8x8 based budget dvb cards are handled by bttv on the
+	   lowest level and we fake a i2c client to get to know all bt8x8 based
+	   cards when they have been registered by bttv.
+	   we do a check for adap->id in order to find the right cards */
+	.class		 = I2C_CLASS_ALL,
         .attach_adapter  = dvb_bt8xx_attach,
         .detach_adapter  = dvb_bt8xx_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c	2004-05-09 11:05:31.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c	2004-05-09 17:39:18.000000000 +0200
@@ -247,6 +247,7 @@
         .name           = "ir remote kbd driver",
         .id             = I2C_DRIVERID_EXP3, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL;
         .attach_adapter = ir_probe,
         .detach_client  = ir_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c	2004-05-09 17:40:38.000000000 +0200
@@ -740,6 +740,7 @@
 	I2C_DEVNAME("zr36057"),
 	.id = I2C_HW_B_ZR36067,
 	.algo = NULL,
+	.class = I2C_CLASS_TV_ANALOG,
 	.client_register = zoran_i2c_client_register,
 	.client_unregister = zoran_i2c_client_unregister,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c	2004-05-09 17:55:49.000000000 +0200
@@ -78,6 +78,7 @@
 	chan->adapter.id		= I2C_ALGO_ATI;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->rinfo->pdev->dev;
+	chan->adapter.class		= I2C_CLASS_NONE;
 	chan->algo.setsda		= radeon_gpio_setsda;
 	chan->algo.setscl		= radeon_gpio_setscl;
 	chan->algo.getsda		= radeon_gpio_getsda;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c	2004-05-09 17:50:36.000000000 +0200
@@ -104,13 +104,14 @@
 };
 
 static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, 
-		unsigned int data, unsigned int clock, const char* name) {
+		unsigned int data, unsigned int clock, const char* name, unsigned int class) {
 	int err;
 
 	b->minfo = minfo;
 	b->mask.data = data;
 	b->mask.clock = clock;
 	b->adapter = matrox_i2c_adapter_template;
+	b->class = class;
 	snprintf(b->adapter.name, I2C_NAME_SIZE, name,
 		minfo->fbcon.node);
 	i2c_set_adapdata(&b->adapter, b);
@@ -160,22 +161,22 @@
 	switch (ACCESS_FBINFO(chip)) {
 		case MGA_2064:
 		case MGA_2164:
-			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0");
+			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0", I2C_CLASS_DDC);
 			break;
 		default:
-			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0");
+			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0", I2C_CLASS_DDC);
 			break;
 	}
 	if (err)
 		goto fail_ddc1;
 	if (ACCESS_FBINFO(devflags.dualhead)) {
-		err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1");
+		err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1", I2C_CLASS_DDC);
 		if (err == -ENODEV) {
 			printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n");
 		} else if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n");
 		/* Register maven bus even on G450/G550 */
-		err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u");
+		err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u", I2C_CLASS_TV_ANALOG);
 		if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
 	}
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c	2004-05-09 17:46:07.000000000 +0200
@@ -1297,6 +1297,7 @@
 	.name		= "maven",
 	.id		= I2C_DRIVERID_MGATVO,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter	= maven_attach_adapter,
 	.detach_client	= maven_detach_client,
 	.command	= maven_command,

[-- Attachment #7: 06-class-all.diff --]
[-- Type: text/plain, Size: 2545 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c	2004-05-09 18:19:44.000000000 +0200
@@ -607,6 +607,7 @@
 	i2c_set_adapdata(adap, dev);
 	adap->id = I2C_HW_OCP | iic_algo.id;
 	adap->algo = &iic_algo;
+	adap->class = I2C_CLASS_ALL;
 	adap->client_register = NULL;
 	adap->client_unregister = NULL;
 	adap->timeout = 1;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c	2004-05-09 18:17:57.000000000 +0200
@@ -507,18 +507,31 @@
 	.name			= ADAPTER_NAME_ROOT "0",
 	.id			= I2C_HW_IOP321,
 	.algo_data		= &algo_iop3xx_data0,
+	.class			= I2C_CLASS_ALL,
 };
 static struct i2c_adapter iop3xx_ops1 = {
 	.owner			= THIS_MODULE,
 	.name			= ADAPTER_NAME_ROOT "1",
 	.id			= I2C_HW_IOP321,
 	.algo_data		= &algo_iop3xx_data1,
+	.class			= I2C_CLASS_ALL,
 };
 
 static int __init i2c_iop3xx_init (void)
 {
-	return i2c_iop3xx_add_bus(&iop3xx_ops0) ||
-		i2c_iop3xx_add_bus(&iop3xx_ops1);
+	int ret;
+	
+	ret = i2c_iop3xx_add_bus(&iop3xx_ops0);
+	if (ret)
+		return ret;
+		
+	ret = i2c_iop3xx_add_bus(&iop3xx_ops1);
+	if (ret) {
+		i2c_iop3xx_del_bus(&iop3xx_ops0);
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit i2c_iop3xx_exit (void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c	2004-05-09 18:13:22.000000000 +0200
@@ -192,6 +192,7 @@
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_I_IIC,
 	.algo_data	= &iic_ite_data,
+	.class		= I2C_CLASS_ALL,
 	.dev		= {
 		.name	= "ITE IIC adapter",
 	},
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c	2004-05-09 18:13:55.000000000 +0200
@@ -84,6 +84,7 @@
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.algo_data	   = &scx200_i2c_data,
+	.class		   = I2C_CLASS_ALL,
 	.name	= "NatSemi SCx200 I2C",
 };
 

[-- Attachment #8: 07-i2c-busses.diff --]
[-- Type: text/plain, Size: 4475 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c	2004-05-09 19:56:30.000000000 +0200
@@ -62,6 +62,7 @@
 	.owner			= THIS_MODULE,
 	.id			= I2C_HW_B_FRODO,
 	.algo_data		= &bit_frodo_data,
+	.class			= I2C_CLASS_ALL,
 	.dev			= {
 		.name		= "Frodo adapter driver",
 	},
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c	2004-05-09 20:04:50.000000000 +0200
@@ -107,6 +107,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
 	.id		= I2C_HW_B_HYDRA,
+	.class		= I2C_CLASS_HWMON,
 	.algo_data	= &hydra_bit_data,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c	2004-05-09 19:58:12.000000000 +0200
@@ -173,6 +173,7 @@
 static struct i2c_adapter i810_i2c_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "I810/I815 I2C Adapter",
+	.class		= I2C_CLASS_ALL, /* fixme, what's the correct class? */
 	.algo_data	= &i810_i2c_bit_data,
 };
 
@@ -189,6 +190,7 @@
 static struct i2c_adapter i810_ddc_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "I810/I815 DDC Adapter",
+	.class		= I2C_CLASS_DDC,
 	.algo_data	= &i810_ddc_bit_data,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c	2004-05-09 11:06:43.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c	2004-05-09 20:04:01.000000000 +0200
@@ -133,8 +133,9 @@
 	drv_data->algo_data.mdelay = 10;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP4XX,
-	drv_data->adapter.algo_data = &drv_data->algo_data,
+	drv_data->adapter.id = I2C_HW_B_IXP4XX;
+	drv_data->adapter.algo_data = &drv_data->algo_data;
+	drv_data->adapter.class = I2C_CLASS_ALL;
 
 	drv_data->adapter.dev.parent = &plat_dev->dev;
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c	2004-05-09 20:00:12.000000000 +0200
@@ -181,12 +181,13 @@
 /*
  * adapter initialisation
  */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg)
+static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg, unsigned int class)
 {
 	int ret;
 	p->adap.owner	  = THIS_MODULE;
 	p->adap.id	  = I2C_HW_B_S3VIA;
 	p->adap.algo_data = &p->algo;
+	p->adap.class	  = class;
 	p->adap.dev.parent = &dev->dev;
 	p->algo.setsda	  = bit_s3via_setsda;
 	p->algo.setscl	  = bit_s3via_setscl;
@@ -281,7 +282,7 @@
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage I2C bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1, I2C_CLASS_ALL);
 	if (ret) {
 		goto err_adap;
 	}
@@ -292,7 +293,7 @@
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage DDC bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2, I2C_CLASS_DDC);
 	if (ret) {
 		goto err_adap;
 	}
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c	2004-05-09 20:01:31.000000000 +0200
@@ -149,6 +149,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "I2C Savage4 adapter",
 	.algo_data	= &sav_i2c_bit_data,
+	.class		= I2C_CLASS_ALL, /* fixme: correct class entry? */
 };
 
 static struct pci_device_id savage4_ids[] __devinitdata = {

[-- Attachment #9: 08-i2c-core.diff --]
[-- Type: text/plain, Size: 1176 bytes --]

diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c	2004-05-09 21:18:35.000000000 +0200
@@ -148,8 +148,11 @@
 	list_for_each(item,&drivers) {
 		driver = list_entry(item, struct i2c_driver, list);
 		if (driver->flags & I2C_DF_NOTIFY)
-			/* We ignore the return code; if it fails, too bad */
-			driver->attach_adapter(adap);
+			if (adap->class & driver->class)
+				/* We ignore the return code; if it fails, too bad */
+				driver->attach_adapter(adap);
+			else
+				printk("i2c-core: skipping driver '%s' on adapter '%s' (class mismatch)\n",driver->name, adap->name); 
 	}
 	up(&core_lists);
 
@@ -247,7 +250,10 @@
 	if (driver->flags & I2C_DF_NOTIFY) {
 		list_for_each(item,&adapters) {
 			adapter = list_entry(item, struct i2c_adapter, list);
-			driver->attach_adapter(adapter);
+			if (adapter->class & driver->class)
+				driver->attach_adapter(adapter);
+			else
+				printk("i2c-core: skipping driver '%s' on adapter '%s' (class mismatch)\n",driver->name, adap->name); 
 		}
 	}
 

Re: Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Jon Smirl]

An addition to the class idea would be for clients to have priorities.
That would let me mark the bus as being for DDC. The highest priority
client would be the DDC driver. If the DDC driver can't find valid
EDID it could then fall back to letting the EEPROM driver try to find
the chip.

Something like this is important if we get a new EDID standard that
the DDC driver doesn't recognize. By letting the EEPROM driver load at
a lower priority you could still easily get to the ROM contents. Or
does it bother people if we let both EEPROM and DDC load on DDC class
buses?

-- 
Jon Smirl
jonsmirl@gmail.com

Re: Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Greg KH]

On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> Please have a look and tell me what you think. The big problem will be, 
> that we cannot test all configurations, so it's possible that some 
> devices won't be recognized anymore, because the .class entries don't match.

I like the patches.  If you get them in a state you like (and drop the
printk(), and use dev_dbg() instead), and send them 1 patch per file
with the Signed-off-by: line, I'll be glad to apply them.

thanks,

greg k-h

Re: Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Michael Hunold]

Hi,

On 24.09.2004 02:02, Greg KH wrote:
> On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> 
>>Please have a look and tell me what you think. The big problem will be, 
>>that we cannot test all configurations, so it's possible that some 
>>devices won't be recognized anymore, because the .class entries don't match.

> I like the patches.  If you get them in a state you like (and drop the
> printk(), and use dev_dbg() instead), 

Ok.

> and send them 1 patch per file
> with the Signed-off-by: line, I'll be glad to apply them.

I'll re-create them against 2.6.9-rc2-mm2.

Do you really mean one patch per file, ie. about 50 separate patches? (I 
don't care, I simply write a script that splits them up)

> thanks,
> greg k-h

CU
Michael.

Re: Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Greg KH]

On Fri, Sep 24, 2004 at 08:22:34AM +0200, Michael Hunold wrote:
> Hi,
> 
> On 24.09.2004 02:02, Greg KH wrote:
> >On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> >
> >>Please have a look and tell me what you think. The big problem will be, 
> >>that we cannot test all configurations, so it's possible that some 
> >>devices won't be recognized anymore, because the .class entries don't 
> >>match.
> 
> >I like the patches.  If you get them in a state you like (and drop the
> >printk(), and use dev_dbg() instead), 
> 
> Ok.
> 
> >and send them 1 patch per file
> >with the Signed-off-by: line, I'll be glad to apply them.
> 
> I'll re-create them against 2.6.9-rc2-mm2.
> 
> Do you really mean one patch per file, ie. about 50 separate patches? (I 
> don't care, I simply write a script that splits them up)

Sorry, I ment one email per patch (you sent more than one patch in that
email.)

thanks,

greg k-h

Adding .class field to struct i2c_client (was Re: [PATCH][2.6] Add

[Michael Hunold]

Hi,

On 21.09.2004 15:28, Jean Delvare wrote:
> On a completely different matter, what about the i2c subsystem class flags and
> checking mechanism? You had come with a first step some months ago (adding a
> class member to i2c clients), and your proposal (generalized check of i2c
> client class against adapter class) looked very good to me, but then we did
> not finish the job. What about it? 

I was unsure about the .class entries for some of the clients, then 
didn't find the time to investigate further and from then on the patches 
are bit-rotting on my harddisc. ;-(

> I am willing to help on the sensors front
> if you are going into this again someday. If I remember correctly, step 2 was
> about clearing manual class checks and filling all class members, and step 3
> was about implementing the generalized check in i2c-core. Am I right?

Yes, right. I've cleaned up the patches and attached them to this mail. 
Unfortunately, they only apply to 2.6.8(.1), but not 2.6.9-rc2-mm1. This 
is because SMBUS has been renamed to HWMON IIRC.

Please have a look and tell me what you think. The big problem will be, 
that we cannot test all configurations, so it's possible that some 
devices won't be recognized anymore, because the .class entries don't match.

Patches 1-3 are straight forward. For patches 4-7 I once created the 
following list:

=>4
#drivers/ieee1394/pcilynx.c => I2C_CLASS_NONE
#drivers/macintosh/therm_adt746x.c => I2C_CLASS_HWMON
#drivers/macintosh/therm_pm72.c => I2C_CLASS_HWMON
#drivers/macintosh/therm_windtunnel.c => I2C_CLASS_HWMON
#drivers/acorn/char/pcf8583.c => I2C_CLASS_ALL
#drivers/acorn/char/i2c.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-keywest.c: => I2C_CLASS_HWMON | I2C_CLASS_SOUND;
#sound/ppc/keywest.c => I2C_CLASS_SOUND
#sound/oss/dmasound/dac3550a.c => I2C_CLASS_SOUND
#sound/oss/dmasound/tas_common.c => I2C_CLASS_SOUND

=>5
#drivers/i2c/algos/i2c-algo-pcf.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-elektor.c => I2C_CLASS_ALL
#drivers/video/aty/radeon_i2c.c => I2C_CLASS_NONE
#drivers/video/matrox/i2c-matroxfb.c => I2C_CLASS_DDC and 
I2C_CLASS_TV_ANALOG
#drivers/video/matrox/matroxfb_maven.c => I2C_CLASS_TV_ANALOG
#drivers/media/video/zoran_card.c => I2C_CLASS_TV_ANALOG
#drivers/media/video/ir-kbd-i2c.c => I2C_CLASS_TV_ANALOG | 
I2C_CLASS_TV_DIGITAL
#drivers/media/dvb/bt8xx/dvb-bt8xx.c => I2C_CLASS_ALL

=>6
#drivers/i2c/busses/i2c-ibm_iic.c: => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-iop3xx.c:=> I2C_CLASS_ALL
#drivers/i2c/busses/scx200_i2c.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-ite.c => I2C_CLASS_ALL
(drivers/i2c/algos/i2c-algo-ite.c:)

=>7
#drivers/i2c/busses/i2c-frodo.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-i810.c => I2C_CLASS_ALL + I2C_CLASS_DDC
#drivers/i2c/busses/i2c-prosavage.c => I2C_CLASS_ALL + I2C_CLASS_DDC
#drivers/i2c/busses/i2c-savage4.c => I2C_CLASS_ALL
#drivers/i2c/busses/i2c-ixp4xx.c => I2C_CLASS_ALL, doesn't compile!?
#drivers/i2c/busses/i2c-hydra.c => I2C_CLASS_HWMON

> Thanks.

CU
Michael.

-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/adv7170.c	2004-05-09 11:28:12.000000000 +0200
@@ -516,6 +516,7 @@
 
 	.id = I2C_DRIVERID_ADV7170,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = adv7170_attach_adapter,
 	.detach_client = adv7170_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/adv7175.c	2004-05-09 11:27:55.000000000 +0200
@@ -538,6 +538,7 @@
 
 	.id = I2C_DRIVERID_ADV7175,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = adv7175_attach_adapter,
 	.detach_client = adv7175_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt819.c	2004-05-09 11:24:22.000000000 +0200
@@ -642,6 +642,7 @@
 
 	.id = I2C_DRIVERID_BT819,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = bt819_attach_adapter,
 	.detach_client = bt819_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt856.c	2004-05-09 11:23:22.000000000 +0200
@@ -423,6 +423,7 @@
 
 	.id = I2C_DRIVERID_BT856,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = bt856_attach_adapter,
 	.detach_client = bt856_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7110.c	2004-05-09 11:22:57.000000000 +0200
@@ -599,6 +599,7 @@
 
 	.id = I2C_DRIVERID_SAA7110,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7110_attach_adapter,
 	.detach_client = saa7110_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c	2004-05-09 11:06:43.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7111.c	2004-05-09 11:24:54.000000000 +0200
@@ -608,7 +608,8 @@
 
 	.id = I2C_DRIVERID_SAA7111A,
 	.flags = I2C_DF_NOTIFY,
-
+	.class = I2C_CLASS_TV_ANALOG,
+	
 	.attach_adapter = saa7111_attach_adapter,
 	.detach_client = saa7111_detach_client,
 	.command = saa7111_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c	2004-05-09 11:03:04.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7114.c	2004-05-09 11:27:15.000000000 +0200
@@ -1222,6 +1222,7 @@
 
 	.id = I2C_DRIVERID_SAA7114,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7114_attach_adapter,
 	.detach_client = saa7114_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7185.c	2004-05-09 11:23:55.000000000 +0200
@@ -505,6 +505,7 @@
 
 	.id = I2C_DRIVERID_SAA7185B,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = saa7185_attach_adapter,
 	.detach_client = saa7185_detach_client,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9840.c	2004-05-09 11:26:35.000000000 +0200
@@ -263,6 +263,7 @@
 	.name		= "tda9840 driver",
 	.id		= I2C_DRIVERID_TDA9840,
 	.flags		= I2C_DF_NOTIFY,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tda9840_attach,
         .detach_client	= tda9840_detach,
         .command	= tda9840_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tea6415c.c	2004-05-09 11:26:52.000000000 +0200
@@ -212,6 +212,7 @@
 	.name		= "tea6415c driver",
 	.id		= I2C_DRIVERID_TEA6415C,
 	.flags		= I2C_DF_NOTIFY,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tea6415c_attach,
         .detach_client	= tea6415c_detach,
         .command	= tea6415c_command,
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tea6420.c	2004-05-09 11:26:09.000000000 +0200
@@ -192,8 +192,9 @@
 	.name		= "tea6420 driver",
 	.id		= I2C_DRIVERID_TEA6420,
 	.flags		= I2C_DF_NOTIFY,
-        .attach_adapter = tea6420_attach,
+ 	.class 		= I2C_CLASS_TV_ANALOG,
+	.attach_adapter = tea6420_attach,
         .detach_client	= tea6420_detach,
         .command	= tea6420_command,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tuner-3036.c	2004-05-09 11:25:25.000000000 +0200
@@ -185,6 +185,7 @@
 	.name		=	"sab3036",
 	.id		=	I2C_DRIVERID_SAB3036,
         .flags		=	I2C_DF_NOTIFY,
+	.class 		=	I2C_CLASS_TV_ANALOG,
 	.attach_adapter =	tuner_probe,
 	.detach_client  =	tuner_detach,
 	.command	=	tuner_command
@@ -200,8 +201,7 @@
 int __init
 tuner3036_init(void)
 {
-	i2c_add_driver(&i2c_driver_tuner);
-	return 0;
+	return i2c_add_driver(&i2c_driver_tuner);
 }
 
 void __exit
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/vpx3220.c	2004-05-09 11:27:33.000000000 +0200
@@ -731,6 +731,7 @@
 
 	.id = I2C_DRIVERID_VPX3220,
 	.flags = I2C_DF_NOTIFY,
+ 	.class = I2C_CLASS_TV_ANALOG,
 
 	.attach_adapter = vpx3220_attach_adapter,
 	.detach_client = vpx3220_detach_client,
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/bt832.c	2004-05-09 14:49:58.000000000 +0200
@@ -197,9 +197,7 @@
 
 static int bt832_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, bt832_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, bt832_attach);
 }
 
 static int bt832_detach(struct i2c_client *client)
@@ -243,6 +241,7 @@
         .name           = "i2c bt832 driver",
         .id             = -1, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = bt832_probe,
         .detach_client  = bt832_detach,
         .command        = bt832_command,
@@ -257,8 +256,7 @@
 
 int bt832_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void bt832_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/msp3400.c	2004-05-09 14:48:30.000000000 +0200
@@ -1222,6 +1222,7 @@
         .name           = "i2c msp3400 driver",
         .id             = I2C_DRIVERID_MSP3400,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = msp_probe,
         .detach_client  = msp_detach,
         .command        = msp_command,
@@ -1353,19 +1354,7 @@
 
 static int msp_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, msp_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	//case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, msp_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, msp_attach);
 }
 
 static void msp_wake_thread(struct i2c_client *client)
@@ -1558,8 +1547,7 @@
 
 static int msp3400_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void msp3400_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa5246a.c	2004-05-09 14:52:53.000000000 +0200
@@ -143,9 +143,7 @@
  */
 static int saa5246a_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa5246a_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa5246a_attach);
 }
 
 static int saa5246a_detach(struct i2c_client *client)
@@ -174,6 +172,7 @@
 	.name 		= IF_NAME,		/* name */
 	.id 		= I2C_DRIVERID_SAA5249, /* in i2c.h */
 	.flags 		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = saa5246a_probe,
 	.detach_client  = saa5246a_detach,
 	.command 	= saa5246a_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa5249.c	2004-05-09 14:50:30.000000000 +0200
@@ -219,9 +219,7 @@
  
 static int saa5249_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa5249_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa5249_attach);
 }
 
 static int saa5249_detach(struct i2c_client *client)
@@ -249,6 +247,7 @@
 	.name 		= IF_NAME,		/* name */
 	.id 		= I2C_DRIVERID_SAA5249, /* in i2c.h */
 	.flags 		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = saa5249_probe,
 	.detach_client  = saa5249_detach,
 	.command 	= saa5249_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/saa7134/saa6752hs.c	2004-05-09 14:47:01.000000000 +0200
@@ -335,9 +335,7 @@
 
 static int saa6752hs_probe(struct i2c_adapter *adap)
 {
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, saa6752hs_attach);
-	return 0;
+	return i2c_probe(adap, &addr_data, saa6752hs_attach);
 }
 
 static int saa6752hs_detach(struct i2c_client *client)
@@ -376,6 +373,7 @@
         .name           = "i2c saa6752hs MPEG encoder",
         .id             = I2C_DRIVERID_SAA6752HS,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = saa6752hs_probe,
         .detach_client  = saa6752hs_detach,
         .command        = saa6752hs_command,
@@ -390,8 +388,7 @@
 
 static int saa6752hs_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void saa6752hs_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda7432.c	2004-05-09 14:49:17.000000000 +0200
@@ -338,14 +338,7 @@
 
 static int tda7432_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda7432_attach);
-#else
-	if (adap->id = (I2C_ALGO_BIT | I2C_HW_B_BT848))
-		return i2c_probe(adap, &addr_data, tda7432_attach);
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda7432_attach);
 }
 
 static int tda7432_detach(struct i2c_client *client)
@@ -520,6 +513,7 @@
         .name            = "i2c tda7432 driver",
 	.id              = I2C_DRIVERID_TDA7432,
         .flags           = I2C_DF_NOTIFY,
+	.class		 = I2C_CLASS_TV_ANALOG,
 	.attach_adapter  = tda7432_probe,
         .detach_client   = tda7432_detach,
         .command         = tda7432_command,
@@ -538,8 +532,7 @@
 		printk(KERN_ERR "tda7432: loudness parameter must be between 0 and 15\n");
 		return -EINVAL;
 	}
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda7432_fini(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9875.c	2004-05-09 14:48:00.000000000 +0200
@@ -272,14 +272,7 @@
 
 static int tda9875_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda9875_attach);
-#else
-	if (adap->id = (I2C_ALGO_BIT | I2C_HW_B_BT848))
-		return i2c_probe(adap, &addr_data, tda9875_attach);
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda9875_attach);
 }
 
 static int tda9875_detach(struct i2c_client *client)
@@ -391,6 +384,7 @@
         .name           = "i2c tda9875 driver",
         .id             = I2C_DRIVERID_TDA9875,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter = tda9875_probe,
         .detach_client  = tda9875_detach,
         .command        = tda9875_command,
@@ -405,8 +399,7 @@
 
 static int tda9875_init(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda9875_fini(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tda9887.c	2004-05-09 14:46:31.000000000 +0200
@@ -370,19 +370,7 @@
 
 static int tda9887_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tda9887_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, tda9887_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tda9887_attach);
 }
 
 static int tda9887_detach(struct i2c_client *client)
@@ -447,6 +435,7 @@
         .name           = "i2c tda9887 driver",
         .id             = -1, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tda9887_probe,
         .detach_client  = tda9887_detach,
         .command        = tda9887_command,
@@ -460,8 +449,7 @@
 
 static int tda9887_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tda9887_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tuner.c	2004-05-09 14:51:10.000000000 +0200
@@ -1067,21 +1067,7 @@
 	}
 	this_adap = 0;
 
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, tuner_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-	case I2C_ALGO_SAA7146:
-		return i2c_probe(adap, &addr_data, tuner_attach);
-		break;
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, tuner_attach);
 }
 
 static int tuner_detach(struct i2c_client *client)
@@ -1184,6 +1170,7 @@
         .name           = "i2c TV tuner driver",
         .id             = I2C_DRIVERID_TUNER,
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
         .attach_adapter = tuner_probe,
         .detach_client  = tuner_detach,
         .command        = tuner_command,
@@ -1197,8 +1184,7 @@
 
 static int tuner_init_module(void)
 {
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tuner_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tvaudio.c	2004-05-09 14:47:38.000000000 +0200
@@ -1497,18 +1497,7 @@
 
 static int chip_probe(struct i2c_adapter *adap)
 {
-#ifdef I2C_CLASS_TV_ANALOG
-	if (adap->class & I2C_CLASS_TV_ANALOG)
-		return i2c_probe(adap, &addr_data, chip_attach);
-#else
-	switch (adap->id) {
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-	case I2C_ALGO_SAA7134:
-		return i2c_probe(adap, &addr_data, chip_attach);
-	}
-#endif
-	return 0;
+	return i2c_probe(adap, &addr_data, chip_attach);
 }
 
 static int chip_detach(struct i2c_client *client)
@@ -1639,6 +1628,7 @@
         .name            = "generic i2c audio driver",
         .id              = I2C_DRIVERID_TVAUDIO,
         .flags           = I2C_DF_NOTIFY,
+	.class		 = I2C_CLASS_TV_ANALOG,
         .attach_adapter  = chip_probe,
         .detach_client   = chip_detach,
         .command         = chip_command,
@@ -1659,8 +1649,7 @@
 	for (desc = chiplist; desc->name != NULL; desc++)
 		printk("%s%s", (desc = chiplist) ? "" : ",",desc->name);
 	printk("\n");
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void audiochip_cleanup_module(void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/tvmixer.c	2004-05-09 14:52:10.000000000 +0200
@@ -232,6 +232,7 @@
 	.flags           = I2C_DF_NOTIFY,
         .detach_adapter  = tvmixer_adapters,
 #endif
+	.class		 = I2C_CLASS_TV_ANALOG,
         .attach_adapter  = tvmixer_adapters,
         .detach_client   = tvmixer_clients,
 };
@@ -263,23 +264,6 @@
 	struct video_audio va;
 	int i,minor;
 
-#ifdef I2C_CLASS_TV_ANALOG
-	if (!(client->adapter->class & I2C_CLASS_TV_ANALOG))
-		return -1;
-#else
-	/* TV card ??? */
-	switch (client->adapter->id) {
-	case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
-	case I2C_ALGO_BIT | I2C_HW_B_BT848:
-	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
-		/* ok, have a look ... */
-		break;
-	default:
-		/* ignore that one */
-		return -1;
-	}
-#endif
-
 	/* unregister ?? */
 	for (i = 0; i < DEV_MAX; i++) {
 		if (devices[i].dev = client) {
@@ -334,8 +318,7 @@
 	
 	for (i = 0; i < DEV_MAX; i++)
 		devices[i].minor = -1;
-	i2c_add_driver(&driver);
-	return 0;
+	return i2c_add_driver(&driver);
 }
 
 static void tvmixer_cleanup_module(void)
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/adm1021.c	2004-05-09 16:17:00.000000000 +0200
@@ -144,6 +144,7 @@
 	.name		= "adm1021",
 	.id		= I2C_DRIVERID_ADM1021,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= adm1021_attach_adapter,
 	.detach_client	= adm1021_detach_client,
 };
@@ -200,8 +201,6 @@
 
 static int adm1021_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, adm1021_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/asb100.c	2004-05-09 16:13:42.000000000 +0200
@@ -233,6 +233,7 @@
 	.name		= "asb100",
 	.id		= I2C_DRIVERID_ASB100,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= asb100_attach_adapter,
 	.detach_client	= asb100_detach_client,
 };
@@ -609,8 +610,6 @@
  */
 static int asb100_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, asb100_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/ds1621.c	2004-05-09 16:11:42.000000000 +0200
@@ -92,6 +92,7 @@
 	.name		= "ds1621",
 	.id		= I2C_DRIVERID_DS1621,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= ds1621_attach_adapter,
 	.detach_client	= ds1621_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/eeprom.c	2004-05-09 16:11:59.000000000 +0200
@@ -82,6 +82,7 @@
 	.name		= "eeprom",
 	.id		= I2C_DRIVERID_EEPROM,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= eeprom_attach_adapter,
 	.detach_client	= eeprom_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/fscher.c	2004-05-09 16:13:00.000000000 +0200
@@ -124,6 +124,7 @@
 	.name		= "fscher",
 	.id		= I2C_DRIVERID_FSCHER,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= fscher_attach_adapter,
 	.detach_client	= fscher_detach_client,
 };
@@ -293,8 +294,6 @@
 
 static int fscher_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, fscher_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/gl518sm.c	2004-05-09 16:12:21.000000000 +0200
@@ -156,6 +156,7 @@
 	.name		= "gl518sm",
 	.id		= I2C_DRIVERID_GL518,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= gl518_attach_adapter,
 	.detach_client	= gl518_detach_client,
 };
@@ -335,8 +336,6 @@
 
 static int gl518_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, gl518_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/it87.c	2004-05-09 16:16:14.000000000 +0200
@@ -173,6 +173,7 @@
 	.name		= "it87",
 	.id		= I2C_DRIVERID_IT87,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= it87_attach_adapter,
 	.detach_client	= it87_detach_client,
 };
@@ -500,8 +501,6 @@
      * when a new adapter is inserted (and it87_driver is still present) */
 static int it87_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, it87_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm78.c	2004-05-09 16:15:57.000000000 +0200
@@ -229,6 +229,7 @@
 	.name		= "lm78",
 	.id		= I2C_DRIVERID_LM78,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm78_attach_adapter,
 	.detach_client	= lm78_detach_client,
 };
@@ -488,8 +489,6 @@
      * when a new adapter is inserted (and lm78_driver is still present) */
 static int lm78_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm78_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm80.c	2004-05-09 16:15:28.000000000 +0200
@@ -156,6 +156,7 @@
 	.name		= "lm80",
 	.id		= I2C_DRIVERID_LM80,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm80_attach_adapter,
 	.detach_client	= lm80_detach_client,
 };
@@ -376,8 +377,6 @@
 
 static int lm80_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm80_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm83.c	2004-05-09 16:15:08.000000000 +0200
@@ -125,6 +125,7 @@
 	.name		= "lm83",
 	.id		= I2C_DRIVERID_LM83,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm83_attach_adapter,
 	.detach_client	= lm83_detach_client,
 };
@@ -216,8 +217,6 @@
 
 static int lm83_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm83_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm85.c	2004-05-09 16:14:53.000000000 +0200
@@ -403,6 +403,7 @@
 	.name           = "lm85",
 	.id             = I2C_DRIVERID_LM85,
 	.flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter = lm85_attach_adapter,
 	.detach_client  = lm85_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/lm90.c	2004-05-09 16:14:33.000000000 +0200
@@ -146,6 +146,7 @@
 	.name		= "lm90",
 	.id		= I2C_DRIVERID_LM90,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= lm90_attach_adapter,
 	.detach_client	= lm90_detach_client,
 };
@@ -274,8 +275,6 @@
 
 static int lm90_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, lm90_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8574.c	2004-05-09 16:10:36.000000000 +0200
@@ -73,6 +73,7 @@
 	.name		= "pcf8574",
 	.id		= I2C_DRIVERID_PCF8574,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= pcf8574_attach_adapter,
 	.detach_client	= pcf8574_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/pcf8591.c	2004-05-09 16:10:09.000000000 +0200
@@ -95,6 +95,7 @@
 	.name		= "pcf8591",
 	.id		= I2C_DRIVERID_PCF8591,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= pcf8591_attach_adapter,
 	.detach_client	= pcf8591_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/via686a.c	2004-05-09 16:16:46.000000000 +0200
@@ -586,6 +586,7 @@
 	.name		= "via686a",
 	.id		= I2C_DRIVERID_VIA686A,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= via686a_attach_adapter,
 	.detach_client	= via686a_detach_client,
 };
@@ -594,8 +595,6 @@
 /* This is called when the module is loaded */
 static int via686a_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, via686a_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83627hf.c	2004-05-09 16:11:27.000000000 +0200
@@ -331,6 +331,7 @@
 	.name		= "w83627hf",
 	.id		= I2C_DRIVERID_W83627HF,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= w83627hf_attach_adapter,
 	.detach_client	= w83627hf_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83781d.c	2004-05-09 16:17:18.000000000 +0200
@@ -281,6 +281,7 @@
 	.name = "w83781d",
 	.id = I2C_DRIVERID_W83781D,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_HWMON,
 	.attach_adapter = w83781d_attach_adapter,
 	.detach_client = w83781d_detach_client,
 };
@@ -905,8 +906,6 @@
 static int
 w83781d_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, w83781d_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c	2004-05-09 11:11:10.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/chips/w83l785ts.c	2004-05-09 16:13:22.000000000 +0200
@@ -96,6 +96,7 @@
 	.name		= "w83l785ts",
 	.id		= I2C_DRIVERID_W83L785TS,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= w83l785ts_attach_adapter,
 	.detach_client	= w83l785ts_detach_client,
 };
@@ -145,8 +146,6 @@
 
 static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
 	return i2c_detect(adapter, &addr_data, w83l785ts_detect);
 }
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c	2004-05-09 11:05:29.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/i2c-dev.c	2004-05-09 16:06:33.000000000 +0200
@@ -500,6 +500,7 @@
 	.name		= "dev_driver",
 	.id		= I2C_DRIVERID_I2CDEV,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_ALL,
 	.attach_adapter	= i2cdev_attach_adapter,
 	.detach_adapter	= i2cdev_detach_adapter,
 	.detach_client	= i2cdev_detach_client,
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/acorn/char/i2c.c	2004-05-09 16:31:58.000000000 +0200
@@ -345,6 +345,7 @@
 static struct i2c_adapter ioc_ops = {
 	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
+	.class			= I2C_CLASS_ALL,
 	.client_register	= ioc_client_reg,
 	.client_unregister	= ioc_client_unreg,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c
--- xx-linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/acorn/char/pcf8583.c	2004-05-09 16:33:20.000000000 +0200
@@ -227,6 +227,7 @@
 	.name		= "PCF8583",
 	.id		= I2C_DRIVERID_PCF8583,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_ALL, /* fixme: add another I2C_CLASS_xxx entry for Acorn? */
 	.attach_adapter	= pcf8583_probe,
 	.detach_client	= pcf8583_detach,
 	.command	= pcf8583_command
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-keywest.c	2004-05-09 16:37:41.000000000 +0200
@@ -619,6 +619,7 @@
 		chan->iface = iface;
 		chan->chan_no = i;
 		chan->adapter.id = I2C_ALGO_SMBUS;
+		chan->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SOUND;
 		chan->adapter.algo = &keywest_algorithm;
 		chan->adapter.algo_data = NULL;
 		chan->adapter.client_register = NULL;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c	2004-05-09 11:05:30.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/ieee1394/pcilynx.c	2004-05-09 16:42:30.000000000 +0200
@@ -1799,6 +1799,7 @@
                 i2c_adapter = bit_ops;
                 i2c_adapter_data = bit_data;
                 i2c_adapter.algo_data = &i2c_adapter_data;
+		i2c_adapter.class = I2C_CLASS_NONE;
                 i2c_adapter_data.data = lynx;
 
 		PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d",
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_adt746x.c	2004-05-09 16:30:02.000000000 +0200
@@ -164,6 +164,7 @@
 	.name		="Apple Thermostat ADT746x",
 	.id		=0xDEAD7467,
 	.flags		=I2C_DF_NOTIFY,
+	.class		=I2C_CLASS_HWMON,
 	.attach_adapter	=&attach_thermostat,
 	.detach_adapter	=&detach_thermostat,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_pm72.c	2004-05-09 16:29:32.000000000 +0200
@@ -142,6 +142,7 @@
 	.name		= "therm_pm72",
 	.id		= 0xDEADBEEF,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter	= therm_pm72_attach,
 	.detach_adapter	= therm_pm72_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c
--- xx-linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c	2004-05-09 11:03:40.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/macintosh/therm_windtunnel.c	2004-05-09 16:29:13.000000000 +0200
@@ -357,6 +357,7 @@
 	.name		= "Apple G4 Thermostat/Fan",
 	.id		= I2C_DRIVERID_G4FAN,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_HWMON,
 	.attach_adapter = &do_attach,
 	.detach_client	= &do_detach,
 	.command	= NULL,
diff -ura xx-linux-2.6-6-rc3-mm2/include/linux/i2c.h linux-2.6-6-rc3-mm2/include/linux/i2c.h
--- xx-linux-2.6-6-rc3-mm2/include/linux/i2c.h	2004-05-09 11:11:11.000000000 +0200
+++ linux-2.6-6-rc3-mm2/include/linux/i2c.h	2004-05-09 16:42:13.000000000 +0200
@@ -285,7 +285,8 @@
 #define I2C_CLIENT_TEN	0x10			/* we have a ten bit chip address	*/
 						/* Must equal I2C_M_TEN below */
 
-/* i2c adapter classes (bitmask) */
+/* i2c classes (bitmask) */
+#define I2C_CLASS_NONE		0	/* none, don't use */
 #define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
 #define I2C_CLASS_TV_ANALOG	(1<<1)	/* bttv + friends */
 #define I2C_CLASS_TV_DIGITAL	(1<<2)	/* dvb cards */
diff -ura xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c
--- xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c	2004-05-09 11:04:50.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/oss/dmasound/dac3550a.c	2004-05-09 16:38:47.000000000 +0200
@@ -47,6 +47,7 @@
 	.name			= "DAC3550A driver  V " DACA_VERSION,
 	.id			= I2C_DRIVERID_DACA,
 	.flags			= I2C_DF_NOTIFY,
+	.class			= I2C_CLASS_SOUND,
 	.attach_adapter		= daca_attach_adapter,
 	.detach_client		= daca_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c
--- xx-linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c	2004-05-09 11:04:50.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/oss/dmasound/tas_common.c	2004-05-09 16:39:01.000000000 +0200
@@ -50,6 +50,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "tas",
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_SOUND,
 	.attach_adapter	= tas_attach_adapter,
 	.detach_client	= tas_detach_client,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/sound/ppc/keywest.c linux-2.6-6-rc3-mm2/sound/ppc/keywest.c
--- xx-linux-2.6-6-rc3-mm2/sound/ppc/keywest.c	2004-05-09 11:06:53.000000000 +0200
+++ linux-2.6-6-rc3-mm2/sound/ppc/keywest.c	2004-05-09 16:38:03.000000000 +0200
@@ -44,6 +44,7 @@
 	.name = "PMac Keywest Audio",
 	.id = I2C_DRIVERID_KEYWEST,
 	.flags = I2C_DF_NOTIFY,
+	.class = I2C_CLASS_SOUND,
 	.attach_adapter = &keywest_attach_adapter,
 	.detach_client = &keywest_detach_client,
 };
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/algos/i2c-algo-pcf.c	2004-05-09 18:00:47.000000000 +0200
@@ -449,7 +449,8 @@
 
 	adap->id |= pcf_algo.id;
 	adap->algo = &pcf_algo;
-
+	adap->class = I2C_CLASS_ALL;
+	
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-elektor.c	2004-05-09 17:57:16.000000000 +0200
@@ -171,6 +171,7 @@
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
+	.class		= I2C_CLASS_ALL,
 	.name		= "PCF8584 ISA adapter",
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2004-05-09 11:05:31.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2004-05-09 17:38:16.000000000 +0200
@@ -261,6 +261,11 @@
 	.name            = "dvb_bt8xx",
         .id              = I2C_DRIVERID_DVB_BT878A,
 	.flags           = I2C_DF_NOTIFY,
+	/* ugly, but necessary: bt8x8 based budget dvb cards are handled by bttv on the
+	   lowest level and we fake a i2c client to get to know all bt8x8 based
+	   cards when they have been registered by bttv.
+	   we do a check for adap->id in order to find the right cards */
+	.class		 = I2C_CLASS_ALL,
         .attach_adapter  = dvb_bt8xx_attach,
         .detach_adapter  = dvb_bt8xx_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c	2004-05-09 11:05:31.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/ir-kbd-i2c.c	2004-05-09 17:39:18.000000000 +0200
@@ -247,6 +247,7 @@
         .name           = "ir remote kbd driver",
         .id             = I2C_DRIVERID_EXP3, /* FIXME */
         .flags          = I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL;
         .attach_adapter = ir_probe,
         .detach_client  = ir_detach,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c
--- xx-linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/media/video/zoran_card.c	2004-05-09 17:40:38.000000000 +0200
@@ -740,6 +740,7 @@
 	I2C_DEVNAME("zr36057"),
 	.id = I2C_HW_B_ZR36067,
 	.algo = NULL,
+	.class = I2C_CLASS_TV_ANALOG,
 	.client_register = zoran_i2c_client_register,
 	.client_unregister = zoran_i2c_client_unregister,
 };
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/aty/radeon_i2c.c	2004-05-09 17:55:49.000000000 +0200
@@ -78,6 +78,7 @@
 	chan->adapter.id		= I2C_ALGO_ATI;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->rinfo->pdev->dev;
+	chan->adapter.class		= I2C_CLASS_NONE;
 	chan->algo.setsda		= radeon_gpio_setsda;
 	chan->algo.setscl		= radeon_gpio_setscl;
 	chan->algo.getsda		= radeon_gpio_getsda;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/matrox/i2c-matroxfb.c	2004-05-09 17:50:36.000000000 +0200
@@ -104,13 +104,14 @@
 };
 
 static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, 
-		unsigned int data, unsigned int clock, const char* name) {
+		unsigned int data, unsigned int clock, const char* name, unsigned int class) {
 	int err;
 
 	b->minfo = minfo;
 	b->mask.data = data;
 	b->mask.clock = clock;
 	b->adapter = matrox_i2c_adapter_template;
+	b->class = class;
 	snprintf(b->adapter.name, I2C_NAME_SIZE, name,
 		minfo->fbcon.node);
 	i2c_set_adapdata(&b->adapter, b);
@@ -160,22 +161,22 @@
 	switch (ACCESS_FBINFO(chip)) {
 		case MGA_2064:
 		case MGA_2164:
-			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0");
+			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0", I2C_CLASS_DDC);
 			break;
 		default:
-			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0");
+			err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0", I2C_CLASS_DDC);
 			break;
 	}
 	if (err)
 		goto fail_ddc1;
 	if (ACCESS_FBINFO(devflags.dualhead)) {
-		err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1");
+		err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1", I2C_CLASS_DDC);
 		if (err = -ENODEV) {
 			printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n");
 		} else if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n");
 		/* Register maven bus even on G450/G550 */
-		err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u");
+		err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u", I2C_CLASS_TV_ANALOG);
 		if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
 	}
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c
--- xx-linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c	2004-05-09 11:03:09.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/video/matrox/matroxfb_maven.c	2004-05-09 17:46:07.000000000 +0200
@@ -1297,6 +1297,7 @@
 	.name		= "maven",
 	.id		= I2C_DRIVERID_MGATVO,
 	.flags		= I2C_DF_NOTIFY,
+	.class		= I2C_CLASS_TV_ANALOG,
 	.attach_adapter	= maven_attach_adapter,
 	.detach_client	= maven_detach_client,
 	.command	= maven_command,
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ibm_iic.c	2004-05-09 18:19:44.000000000 +0200
@@ -607,6 +607,7 @@
 	i2c_set_adapdata(adap, dev);
 	adap->id = I2C_HW_OCP | iic_algo.id;
 	adap->algo = &iic_algo;
+	adap->class = I2C_CLASS_ALL;
 	adap->client_register = NULL;
 	adap->client_unregister = NULL;
 	adap->timeout = 1;
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-iop3xx.c	2004-05-09 18:17:57.000000000 +0200
@@ -507,18 +507,31 @@
 	.name			= ADAPTER_NAME_ROOT "0",
 	.id			= I2C_HW_IOP321,
 	.algo_data		= &algo_iop3xx_data0,
+	.class			= I2C_CLASS_ALL,
 };
 static struct i2c_adapter iop3xx_ops1 = {
 	.owner			= THIS_MODULE,
 	.name			= ADAPTER_NAME_ROOT "1",
 	.id			= I2C_HW_IOP321,
 	.algo_data		= &algo_iop3xx_data1,
+	.class			= I2C_CLASS_ALL,
 };
 
 static int __init i2c_iop3xx_init (void)
 {
-	return i2c_iop3xx_add_bus(&iop3xx_ops0) ||
-		i2c_iop3xx_add_bus(&iop3xx_ops1);
+	int ret;
+	
+	ret = i2c_iop3xx_add_bus(&iop3xx_ops0);
+	if (ret)
+		return ret;
+		
+	ret = i2c_iop3xx_add_bus(&iop3xx_ops1);
+	if (ret) {
+		i2c_iop3xx_del_bus(&iop3xx_ops0);
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit i2c_iop3xx_exit (void)
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ite.c	2004-05-09 18:13:22.000000000 +0200
@@ -192,6 +192,7 @@
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_I_IIC,
 	.algo_data	= &iic_ite_data,
+	.class		= I2C_CLASS_ALL,
 	.dev		= {
 		.name	= "ITE IIC adapter",
 	},
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/scx200_i2c.c	2004-05-09 18:13:55.000000000 +0200
@@ -84,6 +84,7 @@
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.algo_data	   = &scx200_i2c_data,
+	.class		   = I2C_CLASS_ALL,
 	.name	= "NatSemi SCx200 I2C",
 };
 
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-frodo.c	2004-05-09 19:56:30.000000000 +0200
@@ -62,6 +62,7 @@
 	.owner			= THIS_MODULE,
 	.id			= I2C_HW_B_FRODO,
 	.algo_data		= &bit_frodo_data,
+	.class			= I2C_CLASS_ALL,
 	.dev			= {
 		.name		= "Frodo adapter driver",
 	},
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-hydra.c	2004-05-09 20:04:50.000000000 +0200
@@ -107,6 +107,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
 	.id		= I2C_HW_B_HYDRA,
+	.class		= I2C_CLASS_HWMON,
 	.algo_data	= &hydra_bit_data,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-i810.c	2004-05-09 19:58:12.000000000 +0200
@@ -173,6 +173,7 @@
 static struct i2c_adapter i810_i2c_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "I810/I815 I2C Adapter",
+	.class		= I2C_CLASS_ALL, /* fixme, what's the correct class? */
 	.algo_data	= &i810_i2c_bit_data,
 };
 
@@ -189,6 +190,7 @@
 static struct i2c_adapter i810_ddc_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "I810/I815 DDC Adapter",
+	.class		= I2C_CLASS_DDC,
 	.algo_data	= &i810_ddc_bit_data,
 };
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c	2004-05-09 11:06:43.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-ixp4xx.c	2004-05-09 20:04:01.000000000 +0200
@@ -133,8 +133,9 @@
 	drv_data->algo_data.mdelay = 10;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP4XX,
-	drv_data->adapter.algo_data = &drv_data->algo_data,
+	drv_data->adapter.id = I2C_HW_B_IXP4XX;
+	drv_data->adapter.algo_data = &drv_data->algo_data;
+	drv_data->adapter.class = I2C_CLASS_ALL;
 
 	drv_data->adapter.dev.parent = &plat_dev->dev;
 
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-prosavage.c	2004-05-09 20:00:12.000000000 +0200
@@ -181,12 +181,13 @@
 /*
  * adapter initialisation
  */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg)
+static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg, unsigned int class)
 {
 	int ret;
 	p->adap.owner	  = THIS_MODULE;
 	p->adap.id	  = I2C_HW_B_S3VIA;
 	p->adap.algo_data = &p->algo;
+	p->adap.class	  = class;
 	p->adap.dev.parent = &dev->dev;
 	p->algo.setsda	  = bit_s3via_setsda;
 	p->algo.setscl	  = bit_s3via_setscl;
@@ -281,7 +282,7 @@
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage I2C bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1, I2C_CLASS_ALL);
 	if (ret) {
 		goto err_adap;
 	}
@@ -292,7 +293,7 @@
 	snprintf(bus->adap.name, sizeof(bus->adap.name),
 		"ProSavage DDC bus at %02x:%02x.%x",
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2, I2C_CLASS_DDC);
 	if (ret) {
 		goto err_adap;
 	}
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c	2004-05-09 11:03:02.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/busses/i2c-savage4.c	2004-05-09 20:01:31.000000000 +0200
@@ -149,6 +149,7 @@
 	.owner		= THIS_MODULE,
 	.name		= "I2C Savage4 adapter",
 	.algo_data	= &sav_i2c_bit_data,
+	.class		= I2C_CLASS_ALL, /* fixme: correct class entry? */
 };
 
 static struct pci_device_id savage4_ids[] __devinitdata = {
-------------- next part --------------
diff -ura xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c
--- xx-linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c	2004-05-09 11:03:03.000000000 +0200
+++ linux-2.6-6-rc3-mm2/drivers/i2c/i2c-core.c	2004-05-09 21:18:35.000000000 +0200
@@ -148,8 +148,11 @@
 	list_for_each(item,&drivers) {
 		driver = list_entry(item, struct i2c_driver, list);
 		if (driver->flags & I2C_DF_NOTIFY)
-			/* We ignore the return code; if it fails, too bad */
-			driver->attach_adapter(adap);
+			if (adap->class & driver->class)
+				/* We ignore the return code; if it fails, too bad */
+				driver->attach_adapter(adap);
+			else
+				printk("i2c-core: skipping driver '%s' on adapter '%s' (class mismatch)\n",driver->name, adap->name); 
 	}
 	up(&core_lists);
 
@@ -247,7 +250,10 @@
 	if (driver->flags & I2C_DF_NOTIFY) {
 		list_for_each(item,&adapters) {
 			adapter = list_entry(item, struct i2c_adapter, list);
-			driver->attach_adapter(adapter);
+			if (adapter->class & driver->class)
+				driver->attach_adapter(adapter);
+			else
+				printk("i2c-core: skipping driver '%s' on adapter '%s' (class mismatch)\n",driver->name, adap->name); 
 		}
 	}
 

Adding .class field to struct i2c_client (was Re: [PATCH][2.6]

[Jon Smirl]

An addition to the class idea would be for clients to have priorities.
That would let me mark the bus as being for DDC. The highest priority
client would be the DDC driver. If the DDC driver can't find valid
EDID it could then fall back to letting the EEPROM driver try to find
the chip.

Something like this is important if we get a new EDID standard that
the DDC driver doesn't recognize. By letting the EEPROM driver load at
a lower priority you could still easily get to the ROM contents. Or
does it bother people if we let both EEPROM and DDC load on DDC class
buses?

-- 
Jon Smirl
jonsmirl@gmail.com

[PATCH][2.6] Add command function to struct i2c_adapter

[Jean Delvare]

Hi Michael,

See my various questions inline.

> the attached patch adds a command function to struct i2c_adapter,
> similar to the command function that is already there for struct
> i2c_client.

I didne't even know that. Is this command function in struct i2c_client used
somewhere? What for?

> The reason behind this is as follows:
> In the DVB subsystem, the tuners are accessed via normal kernel i2c
> drivers. One big problem is, that tuners can be wired very differently
> depending on the surrounding hardware. Currently, we need to keep
> specific settings which are unique to a hardware design in the
> independent i2c tuner driver. This is both very ugly and makes it
> impossible to support DVB drivers which are not in the official Linux
> kernel tree, but could otherwise use in-kernel frontend driver.

What is the i2c tuner driver "independent" of? Do you simply mean that it
holds the common code for all DVB adapters?

> If the struct i2c_adapter has a command function, it would be possible
> to get additional informations from the adapter in the i2c client's
> attach_adapter() function *before* probing the device and guessing
> things like i2c addresses or other hardware settings.

I see what you want to do, but I don't exactly see how it solves your problem.
Your new command callback function will provide an adapter-specific interface
to adapter internal data. You will have to fill the data before you can access
it, so there still is hardware-specific data involved. Is your point that this
data would be located in (and split among) adapter drivers instead of the
common tuner driver as is now?

I am interested in your proposal because we (the sensors side of the i2c bus)
are facing a similar problem with hardware monitoring chips on motherboads.
The same chip can be wired differently on various motherboads, and most of the
time there is no way to guess (either because the hardware just doesn't
provide any way, or because the BIOS failed to do its job properly). We have
not come to any solution yet, and most of the time users have to use
user-space tools (such as i2cset) prior to loading the drivers. Looks like the
problem you are dealing with is of similar nature.

My initial thoughts about this were that we could use DMI data and/or PCI
information to identify systems, and trigger motherboard-specific code
whenever needed. It's really just a wild guess, I don't know if it is the
correct way. Wouldn't it work for you as well?

I would appreciate if you could show us some (pseudo)code with explanations on
what you have for now, and what you would have after the change. I have some
difficulties to understand what the change would actually change, most
probably because the video and sensors sides of the i2c subsystem work rather
differently.

On a completely different matter, what about the i2c subsystem class flags and
checking mechanism? You had come with a first step some months ago (adding a
class member to i2c clients), and your proposal (generalized check of i2c
client class against adapter class) looked very good to me, but then we did
not finish the job. What about it? I am willing to help on the sensors front
if you are going into this again someday. If I remember correctly, step 2 was
about clearing manual class checks and filling all class members, and step 3
was about implementing the generalized check in i2c-core. Am I right?

Thanks.

-- 
Jean Delvare
http://khali.linux-fr.org/

[PATCH][2.6] Add command function to struct i2c_adapter

[Michael Hunold]

Hi,

(because I think this will be an in-depth discussion I trimmed the CC 
list a litte bit)

On 21.09.2004 15:28, Jean Delvare wrote:
>>the attached patch adds a command function to struct i2c_adapter,
>>similar to the command function that is already there for struct
>>i2c_client.

> I didne't even know that. Is this command function in struct i2c_client used
> somewhere? What for?

Please have a look at Video4Linux driver drivers/media/video/mxb.c. This 
driver needs various helper chipsets: tuner, tea6145c, tea6420, tda9840, 
saa7111.

For example the tea6415c is a simple video matrix chipset. If the user 
request a change of the input, the video matrix needs to be re-programmed.

For this, the tea6415 driver has the TEA6415C_SWITCH ioctl function, 
which is called through the i2c_client command() function.
 > mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);

Otherwise there would be no way the mxb driver could tell the tea6415c 
that the configuration should be changed.

>>The reason behind this is as follows:
>>In the DVB subsystem, the tuners are accessed via normal kernel i2c
>>drivers. One big problem is, that tuners can be wired very differently
>>depending on the surrounding hardware. Currently, we need to keep
>>specific settings which are unique to a hardware design in the
>>independent i2c tuner driver. This is both very ugly and makes it
>>impossible to support DVB drivers which are not in the official Linux
>>kernel tree, but could otherwise use in-kernel frontend driver.

> What is the i2c tuner driver "independent" of? Do you simply mean that it
> holds the common code for all DVB adapters?

The tuner is called frontend in dvb terms, because it holds more that 
just a simple tuner.

Some parts are hardware-independent and are in the right place in the 
frontend drivers. But manufacturers are free to use different plls (the 
actual tuners). Unfortunately, they nearly all sit on the same i2c 
address, are really dumb, write only and therefore not very distinguishable.

Currently the frontend drivers do a strcmp() on the adapter name. If it 
is "SkyStar2" for example, then it is a TechniSat card with a  Samsung 
TBMU24112IMB pll.

With that solution, it's not possible to support dvb drivers outside of 
the kernel which could theoretically use the in-kernel frontend drivers, 
because h/w dependend things need to coded into every frontend driver.

>>If the struct i2c_adapter has a command function, it would be possible
>>to get additional informations from the adapter in the i2c client's
>>attach_adapter() function *before* probing the device and guessing
>>things like i2c addresses or other hardware settings.

> I see what you want to do, but I don't exactly see how it solves your problem.
> Your new command callback function will provide an adapter-specific interface
> to adapter internal data.

Not adapter internal data, but frontend specific data, that only the 
manufacturer knows (which can be distinguished by subsystem pci ids).

 > You will have to fill the data before you can access
 > it, so there still is hardware-specific data involved. Is your point
 > that this
 > data would be located in (and split among) adapter drivers instead of
 > the
 > common tuner driver as is now?

Yes. With that approach, it's possible to support dvb drivers outside of 
the kernel, because all necessary information about the frontends is 
inside the dvb driver, not the frontend driver.

> I am interested in your proposal because we (the sensors side of the i2c bus)
> are facing a similar problem with hardware monitoring chips on motherboads.
> The same chip can be wired differently on various motherboads, and most of the
> time there is no way to guess (either because the hardware just doesn't
> provide any way, or because the BIOS failed to do its job properly). We have
> not come to any solution yet, and most of the time users have to use
> user-space tools (such as i2cset) prior to loading the drivers. Looks like the
> problem you are dealing with is of similar nature.

Yes, it's basically the same.

> My initial thoughts about this were that we could use DMI data and/or PCI
> information to identify systems, and trigger motherboard-specific code
> whenever needed. It's really just a wild guess, I don't know if it is the
> correct way. Wouldn't it work for you as well?

This is how it will work. In our case, we only need pci ids, but it's 
possible to use other information sources as well.

Let's say the user loads the stv0299 frontend driver and later the 
dvb-ttpci device driver.

The dvb-ttpci driver exports an i2c_adapter, the stv0299 
i2c_attach_adapter() function will be called. Ideally, if this isn't a 
bus from the digitial tv subsystem, then bail out (This needs to be 
implemented, see below).

If we are on a digital tv i2c bus the stv0299 uses the i2c adapter 
command() callback and asks the i2c adapter, if this frontend can be on 
that bus at all and asks for further informations.

dvb-ttpci knows the pci ids and can tell different hardware versions. 
For example, cable dvb cards have different pci ids than satellite dvb 
cards. The stv0299 is a satellite frontend, so if the bus is on a dvb 
cable card then dvb-ttpci can simply tell the stv0299 driver not to do 
anything.

If the stv0299 can be found on that system in theory, either the correct 
hardware stv0299 dependent informations are supplied completely or 
probing informations are supplied.

> I would appreciate if you could show us some (pseudo)code with explanations on
> what you have for now, and what you would have after the change. I have some
> difficulties to understand what the change would actually change, most
> probably because the video and sensors sides of the i2c subsystem work rather
> differently.

Please have a look at drivers/media/dvb/frontends/stv0299.c

At the top you'll notice a lot of defines:
#define PHILIPS_SU1278_TUA      3 // SU1278 with TUA6100 synth

In lots of functions there are switch/case statements to distinguish 
different plls, for example in pll_set_tv_freq().  stv0299_init() is 
ugly, too. The init-data for different hardware is hardcoded into the 
frontend driver. *shiver*

With the command() function, probe_tuner() with the ugly strcmp() stuff 
and i2c probing can be killed completely.

In other places, common i2c_adapter commands can be used to pull 
frontend device specific data from the dvb device (for example frequency 
boundaries) or trigger h/w dependend thinks that only the dvb driver 
knows, like setting a frequency in the pll with command(SET_PLL).

Sorry, I just have some proof-of-concept code, that doesn't use all the 
things I explained above. Some dvb people would like to give up the 
strong separation due to the kernel i2c interface and have something 
more "dvbish".

> On a completely different matter, what about the i2c subsystem class flags and
> checking mechanism? You had come with a first step some months ago (adding a
> class member to i2c clients), and your proposal (generalized check of i2c
> client class against adapter class) looked very good to me, but then we did
> not finish the job. What about it? I am willing to help on the sensors front
> if you are going into this again someday. If I remember correctly, step 2 was
> about clearing manual class checks and filling all class members, and step 3
> was about implementing the generalized check in i2c-core. Am I right?

I'll answer that in a separate mail.

> Thanks.

CU
Michael.

[Fwd: [PATCH][2.6] Add command function to struct i2c_adapter]

[Michael Hunold]

Hi,

sorry I forgot to CC the sensors/i2c mailing list. Comments welcome!

Regards
Michael Hunold.
-------------- next part --------------
An embedded message was scrubbed...
From: Michael Hunold <hunold@linuxtv.org>
Subject: [PATCH][2.6] Add command function to struct i2c_adapter
Date: Mon, 20 Sep 2004 19:19:24 +0200
Size: 2880
Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20040921/88091fbb/PATCH2.mht

Adding .class field to struct i2c_client (was Re: [PATCH][2.6]

[Greg KH]

On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> Please have a look and tell me what you think. The big problem will be, 
> that we cannot test all configurations, so it's possible that some 
> devices won't be recognized anymore, because the .class entries don't match.

I like the patches.  If you get them in a state you like (and drop the
printk(), and use dev_dbg() instead), and send them 1 patch per file
with the Signed-off-by: line, I'll be glad to apply them.

thanks,

greg k-h

Adding .class field to struct i2c_client (was Re: [PATCH][2.6]

[Michael Hunold]

Hi,

On 24.09.2004 02:02, Greg KH wrote:
> On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> 
>>Please have a look and tell me what you think. The big problem will be, 
>>that we cannot test all configurations, so it's possible that some 
>>devices won't be recognized anymore, because the .class entries don't match.

> I like the patches.  If you get them in a state you like (and drop the
> printk(), and use dev_dbg() instead), 

Ok.

> and send them 1 patch per file
> with the Signed-off-by: line, I'll be glad to apply them.

I'll re-create them against 2.6.9-rc2-mm2.

Do you really mean one patch per file, ie. about 50 separate patches? (I 
don't care, I simply write a script that splits them up)

> thanks,
> greg k-h

CU
Michael.

Adding .class field to struct i2c_client (was Re: [PATCH][2.6]

[Greg KH]

On Fri, Sep 24, 2004 at 08:22:34AM +0200, Michael Hunold wrote:
> Hi,
> 
> On 24.09.2004 02:02, Greg KH wrote:
> >On Tue, Sep 21, 2004 at 07:41:31PM +0200, Michael Hunold wrote:
> >
> >>Please have a look and tell me what you think. The big problem will be, 
> >>that we cannot test all configurations, so it's possible that some 
> >>devices won't be recognized anymore, because the .class entries don't 
> >>match.
> 
> >I like the patches.  If you get them in a state you like (and drop the
> >printk(), and use dev_dbg() instead), 
> 
> Ok.
> 
> >and send them 1 patch per file
> >with the Signed-off-by: line, I'll be glad to apply them.
> 
> I'll re-create them against 2.6.9-rc2-mm2.
> 
> Do you really mean one patch per file, ie. about 50 separate patches? (I 
> don't care, I simply write a script that splits them up)

Sorry, I ment one email per patch (you sent more than one patch in that
email.)

thanks,

greg k-h