* bttv : overlay mode and big disk io hang and could corrupt the fs
@ 2005-02-09 0:45 matthieu castet
2005-02-12 11:29 ` matthieu castet
0 siblings, 1 reply; 3+ messages in thread
From: matthieu castet @ 2005-02-09 0:45 UTC (permalink / raw)
To: Linux Kernel list, Gerd Knorr
[-- Attachment #1: Type: text/plain, Size: 1604 bytes --]
Hi,
if I run "xawtv" [1] and then do a "grep -r toto /usr", my system
quickly freeze. If there isn't any xawv running nothing happen. I don't
try to use xawtv with grab mode (port 54) because I don't want to loose
data by crashing again my / fs.
I retry it and I arrived to get some log (see the attach file).
But after rebooting, I had a big surprise, the / ext3 fs was corrupted
and I need to run fsck by hand ....
Matthieu
[1]
$xawtv -hwscan
This is xawtv-3.94, running on Linux/i686 (2.6.10)
looking for available devices
port 53-53 [ -xvport 53 ]
type : Xvideo, video overlay
name : video4linux
port 54-54
type : Xvideo, image scaler
name : NV Video Overlay
port 55-86
type : Xvideo, image scaler
name : NV Video Blitter
/dev/video0: OK [ -device /dev/video0 ]
type : v4l2
name : BT878 video (Pinnacle PCTV Stud
flags: overlay capture tuner
$cat /proc/interrupts
CPU0
0: 654027 IO-APIC-edge timer
1: 2679 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
9: 0 IO-APIC-level acpi
12: 23644 IO-APIC-edge i8042
14: 88469 IO-APIC-edge ide0
15: 2 IO-APIC-edge ide1
17: 5 IO-APIC-level eth0, bttv0, Bt87x audio
18: 48 IO-APIC-level ide2, ide3
19: 0 IO-APIC-level EMU10K1
21: 97526 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd
22: 0 IO-APIC-level VIA8233
NMI: 0
LOC: 661965
ERR: 0
MIS: 0
[-- Attachment #2: log --]
[-- Type: text/plain, Size: 7673 bytes --]
Feb 9 01:20:32 localhost kernel: ehci_hcd 0000:00:10.3: fatal error
Feb 9 01:20:32 localhost kernel: ehci_hcd 0000:00:10.3: HC died; cleaning up
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 9 01:20:32 localhost last message repeated 11 times
Feb 9 01:20:32 localhost kernel: init_special_inode: bogus i_mode (63)
Feb 9 01:20:32 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 9 01:20:32 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:32 localhost kernel: uhci_hcd 0000:00:10.0: host system error, PCI problems?
Feb 9 01:20:32 localhost kernel: uhci_hcd 0000:00:10.0: host controller halted, very bad!
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:32 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 9 01:20:32 localhost last message repeated 4 times
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:32 localhost last message repeated 3 times
Feb 9 01:20:32 localhost kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3
Feb 9 01:20:32 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:34 localhost last message repeated 42 times
Feb 9 01:20:34 localhost kernel: [EAGLE-USB] Ctrl Urb Watcher expired. About to remove URB f5e1bd60
Feb 9 01:20:34 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 9 01:20:36 localhost last message repeated 49 times
Feb 9 01:20:36 localhost kernel: [EAGLE-USB] Ctrl Urb Watcher expired. About to remove URB f5e1bae0
Feb 9 01:20:36 localhost kernel: bttv0: OCERR @ 3635001c,bits: HSYNC OFLOW RISCI* OCERR*
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: bttv : overlay mode and big disk io hang and could corrupt the fs
2005-02-09 0:45 bttv : overlay mode and big disk io hang and could corrupt the fs matthieu castet
@ 2005-02-12 11:29 ` matthieu castet
0 siblings, 0 replies; 3+ messages in thread
From: matthieu castet @ 2005-02-12 11:29 UTC (permalink / raw)
To: matthieu castet; +Cc: Linux Kernel list, Gerd Knorr
[-- Attachment #1: Type: text/plain, Size: 1580 bytes --]
Hi,
matthieu castet wrote:
> Hi,
>
> if I run "xawtv" [1] and then do a "grep -r toto /usr", my system
> quickly freeze. If there isn't any xawv running nothing happen. I don't
> try to use xawtv with grab mode (port 54) because I don't want to loose
> data by crashing again my / fs.
>
> I retry it and I arrived to get some log (see the attach file).
>
> But after rebooting, I had a big surprise, the / ext3 fs was corrupted
> and I need to run fsck by hand ....
>
> Matthieu
I have done other tests.
If I use grabdisplay mode the problem doesn't occur.
If using overlay mode with port 54 the problem is present.
I have also try the cvs bttv driver and the problem isn't fixed.
Can someone look at it?
It seem that something is corrupting kernel memory because usb failed &
ext3 failed...
I attached a new log when the problem appear.
Note that there are similitude with
http://www.ussg.iu.edu/hypermail/linux/kernel/0412.3/0881.html and
http://marc.theaimsgroup.com/?t=110531543900002&r=1&w=2
Matthieu
> [1]
> $xawtv -hwscan
> This is xawtv-3.94, running on Linux/i686 (2.6.10)
> looking for available devices
> port 53-53 [ -xvport 53 ]
> type : Xvideo, video overlay
> name : video4linux
>
> port 54-54
> type : Xvideo, image scaler
> name : NV Video Overlay
>
> port 55-86
> type : Xvideo, image scaler
> name : NV Video Blitter
>
> /dev/video0: OK [ -device /dev/video0 ]
> type : v4l2
> name : BT878 video (Pinnacle PCTV Stud
> flags: overlay capture tuner
>
[-- Attachment #2: dmes --]
[-- Type: text/plain, Size: 17151 bytes --]
Feb 12 12:08:33 localhost kernel: Linux video capture interface: v1.00
Feb 12 12:08:33 localhost kernel: bttv: driver version 0.9.15 loaded
Feb 12 12:08:33 localhost kernel: bttv: snapshot date 2005-02-10
Feb 12 12:08:33 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Feb 12 12:08:33 localhost kernel: bttv: Bt8xx card found (0).
Feb 12 12:08:33 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 12 12:08:33 localhost kernel: bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 17, latency: 32, mmio: 0xddcfe000
Feb 12 12:08:33 localhost kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
Feb 12 12:08:33 localhost kernel: bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
Feb 12 12:08:33 localhost kernel: bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
Feb 12 12:08:33 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 12 12:08:33 localhost kernel: bttv0: miro: id=9 tuner=3 radio=no stereo=no
Feb 12 12:08:33 localhost kernel: bttv0: using tuner=3
Feb 12 12:08:33 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 12 12:08:33 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 12 12:08:33 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 12 12:08:33 localhost kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not found
Feb 12 12:08:34 localhost kernel: tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
Feb 12 12:08:34 localhost kernel: tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
Feb 12 12:08:34 localhost kernel: bttv0: registered device video0
Feb 12 12:08:34 localhost kernel: bttv0: registered device vbi0
Feb 12 12:08:34 localhost kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 12 12:09:14 localhost kernel: tuner: tv freq set to 208.00
Feb 12 12:09:14 localhost kernel: tv: VHF high range
Feb 12 12:09:14 localhost kernel: tuner: tv 0x0f 0x6f 0x8e 0x97
Feb 12 12:09:14 localhost kernel: tv: VHF high range
Feb 12 12:09:14 localhost kernel: tuner: tv 0x0f 0x6f 0x8e 0x97
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW RISCI* OCERR*
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: non-integral number of cells in incoming data.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: incoming data length = 1.
Feb 12 12:09:49 localhost kernel: [EAGLE-USB] eu_uni_process_in_data: ATM_CELL_SIZE = 35.
Feb 12 12:09:49 localhost kernel: uhci_hcd 0000:00:10.0: host system error, PCI problems?
Feb 12 12:09:49 localhost kernel: uhci_hcd 0000:00:10.0: host controller halted, very bad!
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost last message repeated 6 times
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #258280: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #629067: rec_len %% 4 != 0 - offset=0, inode=1919250533, rec_len=25389, name_len=111
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #629078: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #145262: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (170757)
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (51046)
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #822876: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #96986: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (35425)
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (71670)
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (116206)
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #729605: rec_len %% 4 != 0 - offset=0, inode=37585332, rec_len=7786, name_len=0
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (116006)
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:49 localhost last message repeated 2 times
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:49 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:49 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost last message repeated 8 times
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost last message repeated 2 times
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #194919: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost last message repeated 4 times
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (56712)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (166203)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost last message repeated 2 times
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (113250)
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (32763)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost last message repeated 3 times
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost kernel: EXT3-fs error (device hdb2): ext3_readdir: bad entry in directory #532951: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost last message repeated 3 times
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:50 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:50 localhost last message repeated 2 times
Feb 12 12:09:50 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost kernel: init_special_inode: bogus i_mode (115532)
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=1871353184, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8619069784, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8529944672, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=8486519816, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=1871353184, limit=13671504
Feb 12 12:09:51 localhost kernel: attempt to access beyond end of device
Feb 12 12:09:51 localhost kernel: hdb2: rw=0, want=1871353184, limit=13671504
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW FDSR OCERR*
Feb 12 12:09:51 localhost kernel: init_special_inode: bogus i_mode (0)
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost kernel: init_special_inode: bogus i_mode (72150)
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:09:51 localhost last message repeated 2 times
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW FDSR OCERR*
Feb 12 12:09:51 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:10:07 localhost last message repeated 406 times
Feb 12 12:10:07 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW FDSR OCERR*
Feb 12 12:10:07 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:10:17 localhost last message repeated 243 times
Feb 12 12:10:17 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW FDSR OCERR*
Feb 12 12:10:17 localhost kernel: bttv0: OCERR @ 3328b01c,bits: HSYNC OFLOW OCERR*
Feb 12 12:10:17 localhost last message repeated 6 times
Feb 12 12:10:17 localhost kernel: bttv0: timeout: drop=0 irq=3900/3900, risc=3328b01c, bits: HSYNC OFLOW
Feb 12 12:10:17 localhost kernel: bttv0: reset, reinitialize
Feb 12 12:10:17 localhost kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 12 12:10:17 localhost kernel: tv: VHF high range
Feb 12 12:10:17 localhost kernel: tuner: tv 0x0f 0x6f 0x8e 0x97
Feb 12 12:10:18 localhost kernel: bttv0: OCERR @ 3328b01c,bits: VSYNC HSYNC OFLOW RISCI* OCERR*
Feb 12 12:10:18 localhost kernel: bttv0: OCERR @ 3328b01c,bits: VSYNC HSYNC OFLOW OCERR*
Feb 12 12:10:19 localhost last message repeated 2 times
Feb 12 12:10:19 localhost kernel: bttv0: OCERR @ 3328b01c,bits: VSYNC HSYNC OFLOW RISCI* OCERR*
Feb 12 12:10:19 localhost kernel: bttv0: OCERR @ 3328b01c,bits: VSYNC HSYNC OFLOW OCERR*
Feb 12 12:10:20 localhost last message repeated 4 times
Feb 12 12:10:22 localhost kernel: bttv0: unloading
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: bttv : overlay mode and big disk io hang and could corrupt the fs
[not found] ` <4210C412.6070503@lazy.shacknet.nu>
@ 2005-02-14 16:36 ` castet.matthieu
0 siblings, 0 replies; 3+ messages in thread
From: castet.matthieu @ 2005-02-14 16:36 UTC (permalink / raw)
To: Nomad Arton; +Cc: linux-kernel
Hi,
Selon Nomad Arton <lkml@lazy.shacknet.nu>:
> matthieu castet schrieb:
> >
> > I have done other tests.
> >
> > If I use grabdisplay mode the problem doesn't occur.
> > If using overlay mode with port 54 the problem is present.
> >
> > I have also try the cvs bttv driver and the problem isn't fixed.
> >
> > Can someone look at it?
>
> someone may look at it if you manage to reproduce the failure without
> the nvidia binary kernel module loaded. in xfree then use nv driver
> module, that too supports xvideo extension.
Where do you see I used the nvidia binary kernel module ?
The first bug report was done with the nv driver (But I am not sure that the
nvidia module wasn't loaded)
Matthieu
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-02-14 16:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-02-09 0:45 bttv : overlay mode and big disk io hang and could corrupt the fs matthieu castet
2005-02-12 11:29 ` matthieu castet
[not found] <3vOdq-WS-15@gated-at.bofh.it>
[not found] ` <3x3N7-6zI-13@gated-at.bofh.it>
[not found] ` <4210C412.6070503@lazy.shacknet.nu>
2005-02-14 16:36 ` castet.matthieu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.