* [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
@ 2022-09-21 2:50 Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 01/15] selftests/tc-testing: add selftests for atm qdisc Zhengchao Shao
` (16 more replies)
0 siblings, 17 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
For this patchset, test cases of the qdisc modules are added to the
tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm
ok 1 7628 - Create ATM with default setting
ok 2 390a - Delete ATM with valid handle
ok 3 32a0 - Show ATM class
ok 4 6310 - Dump ATM stats
./tdc.py -c choke
ok 1 8937 - Create CHOKE with default setting
ok 2 48c0 - Create CHOKE with min packet setting
ok 3 38c1 - Create CHOKE with max packet setting
ok 4 234a - Create CHOKE with ecn setting
ok 5 4380 - Create CHOKE with burst setting
ok 6 48c7 - Delete CHOKE with valid handle
ok 7 4398 - Replace CHOKE with min setting
ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel
ok 1 983a - Create CODEL with default setting
ok 2 38aa - Create CODEL with limit packet setting
ok 3 9178 - Create CODEL with target setting
ok 4 78d1 - Create CODEL with interval setting
ok 5 238a - Create CODEL with ecn setting
ok 6 939c - Create CODEL with ce_threshold setting
ok 7 8380 - Delete CODEL with valid handle
ok 8 289c - Replace CODEL with limit setting
ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf
ok 1 34ba - Create ETF with default setting
ok 2 438f - Create ETF with delta nanos setting
ok 3 9041 - Create ETF with deadline_mode setting
ok 4 9a0c - Create ETF with skip_sock_check setting
ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq
ok 1 983b - Create FQ with default setting
ok 2 38a1 - Create FQ with limit packet setting
ok 3 0a18 - Create FQ with flow_limit setting
ok 4 2390 - Create FQ with quantum setting
ok 5 845b - Create FQ with initial_quantum setting
ok 6 9398 - Create FQ with maxrate setting
ok 7 342c - Create FQ with nopacing setting
ok 8 6391 - Create FQ with refill_delay setting
ok 9 238b - Create FQ with low_rate_threshold setting
ok 10 7582 - Create FQ with orphan_mask setting
ok 11 4894 - Create FQ with timer_slack setting
ok 12 324c - Create FQ with ce_threshold setting
ok 13 424a - Create FQ with horizon time setting
ok 14 89e1 - Create FQ with horizon_cap setting
ok 15 32e1 - Delete FQ with valid handle
ok 16 49b0 - Replace FQ with limit setting
ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred
ok 1 8942 - Create GRED with default setting
ok 2 5783 - Create GRED with grio setting
ok 3 8a09 - Create GRED with limit setting
ok 4 48cb - Create GRED with ecn setting
ok 5 763a - Change GRED setting
ok 6 8309 - Show GRED class
./tdc.py -c hhf
ok 1 4812 - Create HHF with default setting
ok 2 8a92 - Create HHF with limit setting
ok 3 3491 - Create HHF with quantum setting
ok 4 ba04 - Create HHF with reset_timeout setting
ok 5 4238 - Create HHF with admit_bytes setting
ok 6 839f - Create HHF with evict_timeout setting
ok 7 a044 - Create HHF with non_hh_weight setting
ok 8 32f9 - Change HHF with limit setting
ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast
ok 1 900c - Create pfifo_fast with default setting
ok 2 7470 - Dump pfifo_fast stats
ok 3 b974 - Replace pfifo_fast with different handle
ok 4 3240 - Delete pfifo_fast with valid handle
ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug
ok 1 3289 - Create PLUG with default setting
ok 2 0917 - Create PLUG with block setting
ok 3 483b - Create PLUG with release setting
ok 4 4995 - Create PLUG with release_indefinite setting
ok 5 389c - Create PLUG with limit setting
ok 6 384a - Delete PLUG with valid handle
ok 7 439a - Replace PLUG with limit setting
ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb
ok 1 3294 - Create SFB with default setting
ok 2 430a - Create SFB with rehash setting
ok 3 3410 - Create SFB with db setting
ok 4 49a0 - Create SFB with limit setting
ok 5 1241 - Create SFB with max setting
ok 6 3249 - Create SFB with target setting
ok 7 30a9 - Create SFB with increment setting
ok 8 239a - Create SFB with decrement setting
ok 9 9301 - Create SFB with penalty_rate setting
ok 10 2a01 - Create SFB with penalty_burst setting
ok 11 3209 - Change SFB with rehash setting
ok 12 5447 - Show SFB class
./tdc.py -c sfq
ok 1 7482 - Create SFQ with default setting
ok 2 c186 - Create SFQ with limit setting
ok 3 ae23 - Create SFQ with perturb setting
ok 4 a430 - Create SFQ with quantum setting
ok 5 4539 - Create SFQ with divisor setting
ok 6 b089 - Create SFQ with flows setting
ok 7 99a0 - Create SFQ with depth setting
ok 8 7389 - Create SFQ with headdrop setting
ok 9 6472 - Create SFQ with redflowlimit setting
ok 10 8929 - Show SFQ class
./tdc.py -c skbprio
ok 1 283e - Create skbprio with default setting
ok 2 c086 - Create skbprio with limit setting
ok 3 6733 - Change skbprio with limit setting
ok 4 2958 - Show skbprio class
./tdc.py -c taprio
ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
ok 2 9462 - Add taprio Qdisc with multiple sched-entry
ok 3 8d92 - Add taprio Qdisc with txtime-delay
ok 4 d092 - Delete taprio Qdisc with valid handle
ok 5 8471 - Show taprio class
ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf
ok 1 6430 - Create TBF with default setting
ok 2 0518 - Create TBF with mtu setting
ok 3 320a - Create TBF with peakrate setting
ok 4 239b - Create TBF with latency setting
ok 5 c975 - Create TBF with overhead setting
ok 6 948c - Create TBF with linklayer setting
ok 7 3549 - Replace TBF with mtu
ok 8 f948 - Change TBF with latency time
ok 9 2348 - Show TBF class
./tdc.py -c teql
ok 1 84a0 - Create TEQL with default setting
ok 2 7734 - Create TEQL with multiple device
ok 3 34a9 - Delete TEQL with valid handle
ok 4 6289 - Show TEQL stats
---
v2: modify subject prefix
---
Zhengchao Shao (15):
selftests/tc-testing: add selftests for atm qdisc
selftests/tc-testing: add selftests for choke qdisc
selftests/tc-testing: add selftests for codel qdisc
selftests/tc-testing: add selftests for etf qdisc
selftests/tc-testing: add selftests for fq qdisc
selftests/tc-testing: add selftests for gred qdisc
selftests/tc-testing: add selftests for hhf qdisc
selftests/tc-testing: add selftests for pfifo_fast qdisc
selftests/tc-testing: add selftests for plug qdisc
selftests/tc-testing: add selftests for sfb qdisc
selftests/tc-testing: add selftests for sfq qdisc
selftests/tc-testing: add selftests for skbprio qdisc
selftests/tc-testing: add selftests for taprio qdisc
selftests/tc-testing: add selftests for tbf qdisc
selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++
.../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++
.../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++
.../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++
.../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++
.../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++
.../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++
.../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++
.../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++
.../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++
.../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++
.../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++
.../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++
.../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++
.../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++
15 files changed, 2735 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
--
2.17.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 01/15] selftests/tc-testing: add selftests for atm qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 02/15] selftests/tc-testing: add selftests for choke qdisc Zhengchao Shao
` (15 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 7628: Create ATM with default setting
Test 390a: Delete ATM with valid handle
Test 32a0: Show ATM class
Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++++++++++++++++
1 file changed, 94 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
new file mode 100644
index 000000000000..f5bc8670a67d
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
@@ -0,0 +1,94 @@
+[
+ {
+ "id": "7628",
+ "name": "Create ATM with default setting",
+ "category": [
+ "qdisc",
+ "atm"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc atm 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "390a",
+ "name": "Delete ATM with valid handle",
+ "category": [
+ "qdisc",
+ "atm"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root atm"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc atm 1: root refcnt",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "32a0",
+ "name": "Show ATM class",
+ "category": [
+ "qdisc",
+ "atm"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class atm 1: parent 1:",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "6310",
+ "name": "Dump ATM stats",
+ "category": [
+ "qdisc",
+ "atm"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm",
+ "expExitCode": "0",
+ "verifyCmd": "$TC -s qdisc show dev $DUMMY",
+ "matchPattern": "qdisc atm 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 02/15] selftests/tc-testing: add selftests for choke qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 01/15] selftests/tc-testing: add selftests for atm qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 03/15] selftests/tc-testing: add selftests for codel qdisc Zhengchao Shao
` (14 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 8937: Create CHOKE with default setting
Test 48c0: Create CHOKE with min packet setting
Test 38c1: Create CHOKE with max packet setting
Test 234a: Create CHOKE with ecn setting
Test 4380: Create CHOKE with burst setting
Test 48c7: Delete CHOKE with valid handle
Test 4398: Replace CHOKE with min setting
Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/choke.json | 188 ++++++++++++++++++
1 file changed, 188 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
new file mode 100644
index 000000000000..31b7775d25fc
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
@@ -0,0 +1,188 @@
+[
+ {
+ "id": "8937",
+ "name": "Create CHOKE with default setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "48c0",
+ "name": "Create CHOKE with min packet setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "38c1",
+ "name": "Create CHOKE with max packet setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 max 900",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min.*max 900p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "234a",
+ "name": "Create CHOKE with ecn setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 ecn",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p ecn",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4380",
+ "name": "Create CHOKE with burst setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 burst 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "48c7",
+ "name": "Delete CHOKE with valid handle",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4398",
+ "name": "Replace CHOKE with min setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "0301",
+ "name": "Change CHOKE with limit setting",
+ "category": [
+ "qdisc",
+ "choke"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 03/15] selftests/tc-testing: add selftests for codel qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 01/15] selftests/tc-testing: add selftests for atm qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 02/15] selftests/tc-testing: add selftests for choke qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 04/15] selftests/tc-testing: add selftests for etf qdisc Zhengchao Shao
` (13 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78d1: Create CODEL with interval setting
Test 238a: Create CODEL with ecn setting
Test 939c: Create CODEL with ce_threshold setting
Test 8380: Delete CODEL with valid handle
Test 289c: Replace CODEL with limit setting
Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++++++++++
1 file changed, 211 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
new file mode 100644
index 000000000000..ea38099d48e5
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
@@ -0,0 +1,211 @@
+[
+ {
+ "id": "983a",
+ "name": "Create CODEL with default setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "38aa",
+ "name": "Create CODEL with limit packet setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel limit 1500",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1500p target 5ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9178",
+ "name": "Create CODEL with target setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel target 100ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 100ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "78d1",
+ "name": "Create CODEL with interval setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel interval 20ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 20ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "238a",
+ "name": "Create CODEL with ecn setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ecn",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms ecn",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "939c",
+ "name": "Create CODEL with ce_threshold setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ce_threshold 20ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms ce_threshold 20ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "8380",
+ "name": "Delete CODEL with valid handle",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root codel"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "289c",
+ "name": "Replace CODEL with limit setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root codel"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root codel limit 5000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 5000p target 5ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "0648",
+ "name": "Change CODEL with limit setting",
+ "category": [
+ "qdisc",
+ "codel"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root codel"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root codel limit 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 100p target 5ms interval 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 04/15] selftests/tc-testing: add selftests for etf qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (2 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 03/15] selftests/tc-testing: add selftests for codel qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 05/15] selftests/tc-testing: add selftests for fq qdisc Zhengchao Shao
` (12 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 34ba: Create ETF with default setting
Test 438f: Create ETF with delta nanos setting
Test 9041: Create ETF with deadline_mode setting
Test 9a0c: Create ETF with skip_sock_check setting
Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++++++++++++++
1 file changed, 117 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
new file mode 100644
index 000000000000..0046d44bcd93
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
@@ -0,0 +1,117 @@
+[
+ {
+ "id": "34ba",
+ "name": "Create ETF with default setting",
+ "category": [
+ "qdisc",
+ "etf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "438f",
+ "name": "Create ETF with delta nanos setting",
+ "category": [
+ "qdisc",
+ "etf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf delta 100 clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 100 offload off deadline_mode off skip_sock_check off",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9041",
+ "name": "Create ETF with deadline_mode setting",
+ "category": [
+ "qdisc",
+ "etf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI deadline_mode",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode on skip_sock_check off",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9a0c",
+ "name": "Create ETF with skip_sock_check setting",
+ "category": [
+ "qdisc",
+ "etf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI skip_sock_check",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check on",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "2093",
+ "name": "Delete ETF with valid handle",
+ "category": [
+ "qdisc",
+ "etf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 05/15] selftests/tc-testing: add selftests for fq qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (3 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 04/15] selftests/tc-testing: add selftests for etf qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 06/15] selftests/tc-testing: add selftests for gred qdisc Zhengchao Shao
` (11 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 983b: Create FQ with default setting
Test 38a1: Create FQ with limit packet setting
Test 0a18: Create FQ with flow_limit setting
Test 2390: Create FQ with quantum setting
Test 845b: Create FQ with initial_quantum setting
Test 9398: Create FQ with maxrate setting
Test 342c: Create FQ with nopacing setting
Test 6391: Create FQ with refill_delay setting
Test 238b: Create FQ with low_rate_threshold setting
Test 7582: Create FQ with orphan_mask setting
Test 4894: Create FQ with timer_slack setting
Test 324c: Create FQ with ce_threshold setting
Test 424a: Create FQ with horizon time setting
Test 89e1: Create FQ with horizon_cap setting
Test 32e1: Delete FQ with valid handle
Test 49b0: Replace FQ with limit setting
Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++
1 file changed, 395 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
new file mode 100644
index 000000000000..8acb904d1419
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
@@ -0,0 +1,395 @@
+[
+ {
+ "id": "983b",
+ "name": "Create FQ with default setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "38a1",
+ "name": "Create FQ with limit packet setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq limit 3000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 3000p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "0a18",
+ "name": "Create FQ with flow_limit setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq flow_limit 300",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 300p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "2390",
+ "name": "Create FQ with quantum setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq quantum 9000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*orphan_mask 1023 quantum 9000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "845b",
+ "name": "Create FQ with initial_quantum setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq initial_quantum 900000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*initial_quantum 900000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9398",
+ "name": "Create FQ with maxrate setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq maxrate 100000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*maxrate 100Kbit",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "342c",
+ "name": "Create FQ with nopacing setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq nopacing",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*nopacing",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "6391",
+ "name": "Create FQ with refill_delay setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq refill_delay 100ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*refill_delay 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "238b",
+ "name": "Create FQ with low_rate_threshold setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq low_rate_threshold 10000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*low_rate_threshold 10Kbit",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "7582",
+ "name": "Create FQ with orphan_mask setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq orphan_mask 255",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*orphan_mask 255",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4894",
+ "name": "Create FQ with timer_slack setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq timer_slack 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*timer_slack 100ns",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "324c",
+ "name": "Create FQ with ce_threshold setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq ce_threshold 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "424a",
+ "name": "Create FQ with horizon time setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon 100us",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "89e1",
+ "name": "Create FQ with horizon_cap setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon_cap",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon_cap",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "32e1",
+ "name": "Delete FQ with valid handle",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root fq"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "49b0",
+ "name": "Replace FQ with limit setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root fq"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root fq limit 5000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 5000p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9478",
+ "name": "Change FQ with limit setting",
+ "category": [
+ "qdisc",
+ "fq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root fq"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root fq limit 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 100p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 06/15] selftests/tc-testing: add selftests for gred qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (4 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 05/15] selftests/tc-testing: add selftests for fq qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 07/15] selftests/tc-testing: add selftests for hhf qdisc Zhengchao Shao
` (10 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 8942: Create GRED with default setting
Test 5783: Create GRED with grio setting
Test 8a09: Create GRED with limit setting
Test 48cb: Create GRED with ecn setting
Test 763a: Change GRED setting
Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++++++++++++
1 file changed, 164 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
new file mode 100644
index 000000000000..013c8ee037a4
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
@@ -0,0 +1,164 @@
+[
+ {
+ "id": "8942",
+ "name": "Create GRED with default setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "5783",
+ "name": "Create GRED with grio setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 grio",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1.*grio",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "8a09",
+ "name": "Create GRED with limit setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 limit 1000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit 1000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "48ca",
+ "name": "Create GRED with ecn setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 ecn",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*ecn",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "48cb",
+ "name": "Create GRED with harddrop setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 harddrop",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*harddrop",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "763a",
+ "name": "Change GRED setting",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root gred limit 60KB min 15K max 25K burst 64 avpkt 1500 bandwidth 10Mbit DP 1 probability 0.1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit.*vq 1 prio [0-9]+ limit 60Kb min 15Kb max 25Kb",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "8309",
+ "name": "Show GRED class",
+ "category": [
+ "qdisc",
+ "gred"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class gred 1:",
+ "matchCount": "0",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 07/15] selftests/tc-testing: add selftests for hhf qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (5 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 06/15] selftests/tc-testing: add selftests for gred qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 08/15] selftests/tc-testing: add selftests for pfifo_fast qdisc Zhengchao Shao
` (9 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 4812: Create HHF with default setting
Test 8a92: Create HHF with limit setting
Test 3491: Create HHF with quantum setting
Test ba04: Create HHF with reset_timeout setting
Test 4238: Create HHF with admit_bytes setting
Test 839f: Create HHF with evict_timeout setting
Test a044: Create HHF with non_hh_weight setting
Test 32f9: Change HHF with limit setting
Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++++++++++
1 file changed, 210 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
new file mode 100644
index 000000000000..949f6e5de902
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
@@ -0,0 +1,210 @@
+[
+ {
+ "id": "4812",
+ "name": "Create HHF with default setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "8a92",
+ "name": "Create HHF with limit setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf limit 1500",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3491",
+ "name": "Create HHF with quantum setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf quantum 9000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*quantum 9000b hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "ba04",
+ "name": "Create HHF with reset_timeout setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf reset_timeout 100ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 100ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4238",
+ "name": "Create HHF with admit_bytes setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf admit_bytes 100000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 100000b evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "839f",
+ "name": "Create HHF with evict_timeout setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf evict_timeout 0.5s",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 500ms non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "a044",
+ "name": "Create HHF with non_hh_weight setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf non_hh_weight 10",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 10",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "32f9",
+ "name": "Change HHF with limit setting",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root hhf"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root hhf limit 1500",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "385e",
+ "name": "Show HHF class",
+ "category": [
+ "qdisc",
+ "hhf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class hhf 1:",
+ "matchCount": "0",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 08/15] selftests/tc-testing: add selftests for pfifo_fast qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (6 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 07/15] selftests/tc-testing: add selftests for hhf qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 09/15] selftests/tc-testing: add selftests for plug qdisc Zhengchao Shao
` (8 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 900c: Create pfifo_fast with default setting
Test 7470: Dump pfifo_fast stats
Test b974: Replace pfifo_fast with different handle
Test 3240: Delete pfifo_fast with valid handle
Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
new file mode 100644
index 000000000000..ab53238f4c5a
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
@@ -0,0 +1,119 @@
+[
+ {
+ "id": "900c",
+ "name": "Create pfifo_fast with default setting",
+ "category": [
+ "qdisc",
+ "pfifo_fast"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "7470",
+ "name": "Dump pfifo_fast stats",
+ "category": [
+ "qdisc",
+ "pfifo_fast"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast",
+ "expExitCode": "0",
+ "verifyCmd": "$TC -s qdisc show dev $DUMMY",
+ "matchPattern": "Sent.*bytes.*pkt \\(dropped.*overlimits.*requeues .*\\)",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "b974",
+ "name": "Replace pfifo_fast with different handle",
+ "category": [
+ "qdisc",
+ "pfifo_fast"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 2: root pfifo_fast",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc pfifo_fast 2: root refcnt [0-9]+ bands 3 priomap",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 2: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3240",
+ "name": "Delete pfifo_fast with valid handle",
+ "category": [
+ "qdisc",
+ "pfifo_fast"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4385",
+ "name": "Delete pfifo_fast with invalid handle",
+ "category": [
+ "qdisc",
+ "pfifo_fast"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 2: root",
+ "expExitCode": "2",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 09/15] selftests/tc-testing: add selftests for plug qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (7 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 08/15] selftests/tc-testing: add selftests for pfifo_fast qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 10/15] selftests/tc-testing: add selftests for sfb qdisc Zhengchao Shao
` (7 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 3289: Create PLUG with default setting
Test 0917: Create PLUG with block setting
Test 483b: Create PLUG with release setting
Test 4995: Create PLUG with release_indefinite setting
Test 389c: Create PLUG with limit setting
Test 384a: Delete PLUG with valid handle
Test 439a: Replace PLUG with limit setting
Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/plug.json | 188 ++++++++++++++++++
1 file changed, 188 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
new file mode 100644
index 000000000000..6454518af178
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
@@ -0,0 +1,188 @@
+[
+ {
+ "id": "3289",
+ "name": "Create PLUG with default setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "0917",
+ "name": "Create PLUG with block setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug block",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "483b",
+ "name": "Create PLUG with release setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4995",
+ "name": "Create PLUG with release_indefinite setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release_indefinite",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "389c",
+ "name": "Create PLUG with limit setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug limit 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "384a",
+ "name": "Delete PLUG with valid handle",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root plug"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "439a",
+ "name": "Replace PLUG with limit setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root plug"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root plug limit 1000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9831",
+ "name": "Change PLUG with limit setting",
+ "category": [
+ "qdisc",
+ "plug"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root plug"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root plug limit 1000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc plug 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 10/15] selftests/tc-testing: add selftests for sfb qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (8 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 09/15] selftests/tc-testing: add selftests for plug qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 11/15] selftests/tc-testing: add selftests for sfq qdisc Zhengchao Shao
` (6 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 3294: Create SFB with default setting
Test 430a: Create SFB with rehash setting
Test 3410: Create SFB with db setting
Test 49a0: Create SFB with limit setting
Test 1241: Create SFB with max setting
Test 3249: Create SFB with target setting
Test 30a9: Create SFB with increment setting
Test 239a: Create SFB with decrement setting
Test 9301: Create SFB with penalty_rate setting
Test 2a01: Create SFB with penalty_burst setting
Test 3209: Change SFB with rehash setting
Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/sfb.json | 279 ++++++++++++++++++
1 file changed, 279 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
new file mode 100644
index 000000000000..ba2f5e79cdbf
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
@@ -0,0 +1,279 @@
+[
+ {
+ "id": "3294",
+ "name": "Create SFB with default setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "430a",
+ "name": "Create SFB with rehash setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb rehash 60",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 60ms db 60s",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3410",
+ "name": "Create SFB with db setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 10",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 10ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "49a0",
+ "name": "Create SFB with limit setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb limit 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s limit 100p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "1241",
+ "name": "Create SFB with max setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb max 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*max 100p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3249",
+ "name": "Create SFB with target setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb target 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*target 100p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "30a9",
+ "name": "Create SFB with increment setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb increment 0.1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*increment 0.1",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "239a",
+ "name": "Create SFB with decrement setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb decrement 0.1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*decrement 0.1",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "9301",
+ "name": "Create SFB with penalty_rate setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_rate 4000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_rate 4000pps",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "2a01",
+ "name": "Create SFB with penalty_burst setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_burst 64p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3209",
+ "name": "Change SFB with rehash setting",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root sfb rehash 100",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 100ms db 60s",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "5447",
+ "name": "Show SFB class",
+ "category": [
+ "qdisc",
+ "sfb"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class sfb 1:",
+ "matchCount": "0",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 11/15] selftests/tc-testing: add selftests for sfq qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (9 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 10/15] selftests/tc-testing: add selftests for sfb qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 12/15] selftests/tc-testing: add selftests for skbprio qdisc Zhengchao Shao
` (5 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 7482: Create SFQ with default setting
Test c186: Create SFQ with limit setting
Test ae23: Create SFQ with perturb setting
Test a430: Create SFQ with quantum setting
Test 4539: Create SFQ with divisor setting
Test b089: Create SFQ with flows setting
Test 99a0: Create SFQ with depth setting
Test 7389: Create SFQ with headdrop setting
Test 6472: Create SFQ with redflowlimit setting
Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++++++++++
1 file changed, 232 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
new file mode 100644
index 000000000000..b6be718a174a
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
@@ -0,0 +1,232 @@
+[
+ {
+ "id": "7482",
+ "name": "Create SFQ with default setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum.*depth 127 divisor 1024",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "c186",
+ "name": "Create SFQ with limit setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq limit 8",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 8p",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "ae23",
+ "name": "Create SFQ with perturb setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq perturb 10",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "depth 127 divisor 1024 perturb 10sec",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "a430",
+ "name": "Create SFQ with quantum setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq quantum 9000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 9000b depth 127 divisor 1024",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "4539",
+ "name": "Create SFQ with divisor setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq divisor 512",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 divisor 512",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "b089",
+ "name": "Create SFQ with flows setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq flows 20",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "99a0",
+ "name": "Create SFQ with depth setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq depth 64",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 64 divisor 1024",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "7389",
+ "name": "Create SFQ with headdrop setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq headdrop",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "6472",
+ "name": "Create SFQ with redflowlimit setting",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn headdrop",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024 ewma 6 min 8000b max 60000b probability 0.2 ecn",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "8929",
+ "name": "Show SFQ class",
+ "category": [
+ "qdisc",
+ "sfq"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class sfq 1:",
+ "matchCount": "0",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 12/15] selftests/tc-testing: add selftests for skbprio qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (10 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 11/15] selftests/tc-testing: add selftests for sfq qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 13/15] selftests/tc-testing: add selftests for taprio qdisc Zhengchao Shao
` (4 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 283e: Create skbprio with default setting
Test c086: Create skbprio with limit setting
Test 6733: Change skbprio with limit setting
Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
new file mode 100644
index 000000000000..5766045c9d33
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
@@ -0,0 +1,95 @@
+[
+ {
+ "id": "283e",
+ "name": "Create skbprio with default setting",
+ "category": [
+ "qdisc",
+ "skbprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 64",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "c086",
+ "name": "Create skbprio with limit setting",
+ "category": [
+ "qdisc",
+ "skbprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio limit 1",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 1",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "6733",
+ "name": "Change skbprio with limit setting",
+ "category": [
+ "qdisc",
+ "skbprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root skbprio"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root skbprio limit 32",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 32",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "2958",
+ "name": "Show skbprio class",
+ "category": [
+ "qdisc",
+ "skbprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class skbprio 1:",
+ "matchCount": "64",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 13/15] selftests/tc-testing: add selftests for taprio qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (11 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 12/15] selftests/tc-testing: add selftests for skbprio qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 14/15] selftests/tc-testing: add selftests for tbf qdisc Zhengchao Shao
` (3 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test ba39: Add taprio Qdisc to multi-queue device (8 queues)
Test 9462: Add taprio Qdisc with multiple sched-entry
Test 8d92: Add taprio Qdisc with txtime-delay
Test d092: Delete taprio Qdisc with valid handle
Test 8471: Show taprio class
Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++++++++++++++
1 file changed, 135 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
new file mode 100644
index 000000000000..a44455372646
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
@@ -0,0 +1,135 @@
+[
+ {
+ "id": "ba39",
+ "name": "Add taprio Qdisc to multi-queue device (8 queues)",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1 8\" > /sys/bus/netdevsim/new_device"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $ETH",
+ "matchPattern": "qdisc taprio 1: root refcnt [0-9]+ tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2",
+ "matchCount": "1",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ },
+ {
+ "id": "9462",
+ "name": "Add taprio Qdisc with multiple sched-entry",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1 8\" > /sys/bus/netdevsim/new_device"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 sched-entry S 03 300000 sched-entry S 04 400000 flags 0x1 clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $ETH",
+ "matchPattern": "index [0-9]+ cmd S gatemask 0x[0-9]+ interval [0-9]+00000",
+ "matchCount": "3",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ },
+ {
+ "id": "8d92",
+ "name": "Add taprio Qdisc with txtime-delay",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1 8\" > /sys/bus/netdevsim/new_device"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 txtime-delay 500000 clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $ETH",
+ "matchPattern": "clockid TAI flags 0x1 txtime delay 500000",
+ "matchCount": "1",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ },
+ {
+ "id": "d092",
+ "name": "Delete taprio Qdisc with valid handle",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1 8\" > /sys/bus/netdevsim/new_device",
+ "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1:",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $ETH",
+ "matchPattern": "qdisc taprio 1: root refcnt",
+ "matchCount": "0",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ },
+ {
+ "id": "8471",
+ "name": "Show taprio class",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1 8\" > /sys/bus/netdevsim/new_device"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $ETH",
+ "matchPattern": "class taprio 1:[0-9]+ root leaf 1:",
+ "matchCount": "8",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ },
+ {
+ "id": "0a85",
+ "name": "Add taprio Qdisc to single-queue device",
+ "category": [
+ "qdisc",
+ "taprio"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "echo \"1 1\" > /sys/bus/netdevsim/new_device"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI",
+ "expExitCode": "2",
+ "verifyCmd": "$TC qdisc show dev $ETH",
+ "matchPattern": "qdisc taprio 1: root refcnt",
+ "matchCount": "0",
+ "teardown": [
+ "echo \"1\" > /sys/bus/netdevsim/del_device"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 14/15] selftests/tc-testing: add selftests for tbf qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (12 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 13/15] selftests/tc-testing: add selftests for taprio qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 15/15] selftests/tc-testing: add selftests for teql qdisc Zhengchao Shao
` (2 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 6430: Create TBF with default setting
Test 0518: Create TBF with mtu setting
Test 320a: Create TBF with peakrate setting
Test 239b: Create TBF with latency setting
Test c975: Create TBF with overhead setting
Test 948c: Create TBF with linklayer setting
Test 3549: Replace TBF with mtu
Test f948: Change TBF with latency time
Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++++++++++
1 file changed, 211 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
new file mode 100644
index 000000000000..a4b3dfe51ff5
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
@@ -0,0 +1,211 @@
+[
+ {
+ "id": "6430",
+ "name": "Create TBF with default setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 10Kbit burst 1500b limit 1000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "0518",
+ "name": "Create TBF with mtu setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 2048",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "320a",
+ "name": "Create TBF with peakrate setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 1510 peakrate 30000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b peakrate 30Kbit minburst.*limit 1000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "239b",
+ "name": "Create TBF with latency setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 100ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 100ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "c975",
+ "name": "Create TBF with overhead setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 overhead 300",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1800b limit 1000b overhead 300",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "948c",
+ "name": "Create TBF with linklayer setting",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1696b limit 1000b linklayer atm",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "3549",
+ "name": "Replace TBF with mtu",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm"
+ ],
+ "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer ethernet",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "f948",
+ "name": "Change TBF with latency time",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 10ms"
+ ],
+ "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 200ms",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 200ms",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "2348",
+ "name": "Show TBF class",
+ "category": [
+ "qdisc",
+ "tbf"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000",
+ "expExitCode": "0",
+ "verifyCmd": "$TC class show dev $DUMMY",
+ "matchPattern": "class tbf.*parent 1:",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next,v2 15/15] selftests/tc-testing: add selftests for teql qdisc
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (13 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 14/15] selftests/tc-testing: add selftests for tbf qdisc Zhengchao Shao
@ 2022-09-21 2:50 ` Zhengchao Shao
2022-09-22 20:39 ` [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Jakub Kicinski
2022-09-23 13:40 ` Victor Nogueira
16 siblings, 0 replies; 21+ messages in thread
From: Zhengchao Shao @ 2022-09-21 2:50 UTC (permalink / raw)
To: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah, victor
Cc: weiyongjun1, yuehaibing, shaozhengchao
Test 84a0: Create TEQL with default setting
Test 7734: Create TEQL with multiple device
Test 34a9: Delete TEQL with valid handle
Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
---
.../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
new file mode 100644
index 000000000000..0082be0e93ac
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
@@ -0,0 +1,97 @@
+[
+ {
+ "id": "84a0",
+ "name": "Create TEQL with default setting",
+ "category": [
+ "qdisc",
+ "teql"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc teql0 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "7734",
+ "name": "Create TEQL with multiple device",
+ "category": [
+ "qdisc",
+ "teql"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "echo \"1 1 4\" > /sys/bus/netdevsim/new_device",
+ "$TC qdisc add dev $ETH root handle 1: teql0"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc teql0 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "echo \"1\" > /sys/bus/netdevsim/del_device",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "34a9",
+ "name": "Delete TEQL with valid handle",
+ "category": [
+ "qdisc",
+ "teql"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY handle 1: root teql0"
+ ],
+ "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root",
+ "expExitCode": "0",
+ "verifyCmd": "$TC qdisc show dev $DUMMY",
+ "matchPattern": "qdisc teql0 1: root refcnt",
+ "matchCount": "0",
+ "teardown": [
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ },
+ {
+ "id": "6289",
+ "name": "Show TEQL stats",
+ "category": [
+ "qdisc",
+ "teql"
+ ],
+ "plugins": {
+ "requires": "nsPlugin"
+ },
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true"
+ ],
+ "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0",
+ "expExitCode": "0",
+ "verifyCmd": "$TC -s qdisc show dev $DUMMY",
+ "matchPattern": "qdisc teql0 1: root refcnt",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY handle 1: root",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (14 preceding siblings ...)
2022-09-21 2:50 ` [PATCH net-next,v2 15/15] selftests/tc-testing: add selftests for teql qdisc Zhengchao Shao
@ 2022-09-22 20:39 ` Jakub Kicinski
2022-09-22 21:06 ` Jamal Hadi Salim
2022-09-23 13:40 ` Victor Nogueira
16 siblings, 1 reply; 21+ messages in thread
From: Jakub Kicinski @ 2022-09-22 20:39 UTC (permalink / raw)
To: Zhengchao Shao
Cc: netdev, linux-kselftest, jhs, xiyou.wangcong, jiri, shuah,
victor, weiyongjun1, yuehaibing
On Wed, 21 Sep 2022 10:50:37 +0800 Zhengchao Shao wrote:
> For this patchset, test cases of the qdisc modules are added to the
> tc-testing test suite.
Victor, Jamal, pls LMK if you'd like more time to review otherwise
I'd love to apply these this evening. Our patch queue length is
hovering between unreasonable and crazy :(
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
2022-09-22 20:39 ` [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Jakub Kicinski
@ 2022-09-22 21:06 ` Jamal Hadi Salim
2022-09-22 21:10 ` Jakub Kicinski
0 siblings, 1 reply; 21+ messages in thread
From: Jamal Hadi Salim @ 2022-09-22 21:06 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Zhengchao Shao, netdev, linux-kselftest, xiyou.wangcong, jiri,
shuah, victor, weiyongjun1, yuehaibing
On Thu, Sep 22, 2022 at 4:40 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed, 21 Sep 2022 10:50:37 +0800 Zhengchao Shao wrote:
> > For this patchset, test cases of the qdisc modules are added to the
> > tc-testing test suite.
>
> Victor, Jamal, pls LMK if you'd like more time to review otherwise
> I'd love to apply these this evening. Our patch queue length is
> hovering between unreasonable and crazy :(
There's some issue with this patchset - something was oopsing; could be
an issue on our setup. Victor is looking into it.
Tests are good though - and we do review them and run them before
acking...
cheers,
jamal
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
2022-09-22 21:06 ` Jamal Hadi Salim
@ 2022-09-22 21:10 ` Jakub Kicinski
0 siblings, 0 replies; 21+ messages in thread
From: Jakub Kicinski @ 2022-09-22 21:10 UTC (permalink / raw)
To: Jamal Hadi Salim
Cc: Zhengchao Shao, netdev, linux-kselftest, xiyou.wangcong, jiri,
shuah, victor, weiyongjun1, yuehaibing
On Thu, 22 Sep 2022 17:06:02 -0400 Jamal Hadi Salim wrote:
> There's some issue with this patchset - something was oopsing; could be
> an issue on our setup. Victor is looking into it.
>
> Tests are good though - and we do review them and run them before
> acking...
Roger that, I'll take the 18 part set since it looks acked
and hold off on these.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
` (15 preceding siblings ...)
2022-09-22 20:39 ` [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Jakub Kicinski
@ 2022-09-23 13:40 ` Victor Nogueira
2022-09-24 2:32 ` shaozhengchao
16 siblings, 1 reply; 21+ messages in thread
From: Victor Nogueira @ 2022-09-23 13:40 UTC (permalink / raw)
To: Zhengchao Shao, netdev, linux-kselftest, jhs, xiyou.wangcong,
jiri, shuah
Cc: weiyongjun1, yuehaibing
On 20/09/2022 23:50, Zhengchao Shao wrote:
> For this patchset, test cases of the qdisc modules are added to the
> tc-testing test suite.
>
> After a test case is added locally, the test result is as follows:
>
> ./tdc.py -c atm
> ok 1 7628 - Create ATM with default setting
> ok 2 390a - Delete ATM with valid handle
> ok 3 32a0 - Show ATM class
> ok 4 6310 - Dump ATM stats
>
> ./tdc.py -c choke
> ok 1 8937 - Create CHOKE with default setting
> ok 2 48c0 - Create CHOKE with min packet setting
> ok 3 38c1 - Create CHOKE with max packet setting
> ok 4 234a - Create CHOKE with ecn setting
> ok 5 4380 - Create CHOKE with burst setting
> ok 6 48c7 - Delete CHOKE with valid handle
> ok 7 4398 - Replace CHOKE with min setting
> ok 8 0301 - Change CHOKE with limit setting
>
> ./tdc.py -c codel
> ok 1 983a - Create CODEL with default setting
> ok 2 38aa - Create CODEL with limit packet setting
> ok 3 9178 - Create CODEL with target setting
> ok 4 78d1 - Create CODEL with interval setting
> ok 5 238a - Create CODEL with ecn setting
> ok 6 939c - Create CODEL with ce_threshold setting
> ok 7 8380 - Delete CODEL with valid handle
> ok 8 289c - Replace CODEL with limit setting
> ok 9 0648 - Change CODEL with limit setting
>
> ./tdc.py -c etf
> ok 1 34ba - Create ETF with default setting
> ok 2 438f - Create ETF with delta nanos setting
> ok 3 9041 - Create ETF with deadline_mode setting
> ok 4 9a0c - Create ETF with skip_sock_check setting
> ok 5 2093 - Delete ETF with valid handle
>
> ./tdc.py -c fq
> ok 1 983b - Create FQ with default setting
> ok 2 38a1 - Create FQ with limit packet setting
> ok 3 0a18 - Create FQ with flow_limit setting
> ok 4 2390 - Create FQ with quantum setting
> ok 5 845b - Create FQ with initial_quantum setting
> ok 6 9398 - Create FQ with maxrate setting
> ok 7 342c - Create FQ with nopacing setting
> ok 8 6391 - Create FQ with refill_delay setting
> ok 9 238b - Create FQ with low_rate_threshold setting
> ok 10 7582 - Create FQ with orphan_mask setting
> ok 11 4894 - Create FQ with timer_slack setting
> ok 12 324c - Create FQ with ce_threshold setting
> ok 13 424a - Create FQ with horizon time setting
> ok 14 89e1 - Create FQ with horizon_cap setting
> ok 15 32e1 - Delete FQ with valid handle
> ok 16 49b0 - Replace FQ with limit setting
> ok 17 9478 - Change FQ with limit setting
>
> ./tdc.py -c gred
> ok 1 8942 - Create GRED with default setting
> ok 2 5783 - Create GRED with grio setting
> ok 3 8a09 - Create GRED with limit setting
> ok 4 48cb - Create GRED with ecn setting
> ok 5 763a - Change GRED setting
> ok 6 8309 - Show GRED class
>
> ./tdc.py -c hhf
> ok 1 4812 - Create HHF with default setting
> ok 2 8a92 - Create HHF with limit setting
> ok 3 3491 - Create HHF with quantum setting
> ok 4 ba04 - Create HHF with reset_timeout setting
> ok 5 4238 - Create HHF with admit_bytes setting
> ok 6 839f - Create HHF with evict_timeout setting
> ok 7 a044 - Create HHF with non_hh_weight setting
> ok 8 32f9 - Change HHF with limit setting
> ok 9 385e - Show HHF class
>
> ./tdc.py -c pfifo_fast
> ok 1 900c - Create pfifo_fast with default setting
> ok 2 7470 - Dump pfifo_fast stats
> ok 3 b974 - Replace pfifo_fast with different handle
> ok 4 3240 - Delete pfifo_fast with valid handle
> ok 5 4385 - Delete pfifo_fast with invalid handle
>
> ./tdc.py -c plug
> ok 1 3289 - Create PLUG with default setting
> ok 2 0917 - Create PLUG with block setting
> ok 3 483b - Create PLUG with release setting
> ok 4 4995 - Create PLUG with release_indefinite setting
> ok 5 389c - Create PLUG with limit setting
> ok 6 384a - Delete PLUG with valid handle
> ok 7 439a - Replace PLUG with limit setting
> ok 8 9831 - Change PLUG with limit setting
>
> ./tdc.py -c sfb
> ok 1 3294 - Create SFB with default setting
> ok 2 430a - Create SFB with rehash setting
> ok 3 3410 - Create SFB with db setting
> ok 4 49a0 - Create SFB with limit setting
> ok 5 1241 - Create SFB with max setting
> ok 6 3249 - Create SFB with target setting
> ok 7 30a9 - Create SFB with increment setting
> ok 8 239a - Create SFB with decrement setting
> ok 9 9301 - Create SFB with penalty_rate setting
> ok 10 2a01 - Create SFB with penalty_burst setting
> ok 11 3209 - Change SFB with rehash setting
> ok 12 5447 - Show SFB class
>
> ./tdc.py -c sfq
> ok 1 7482 - Create SFQ with default setting
> ok 2 c186 - Create SFQ with limit setting
> ok 3 ae23 - Create SFQ with perturb setting
> ok 4 a430 - Create SFQ with quantum setting
> ok 5 4539 - Create SFQ with divisor setting
> ok 6 b089 - Create SFQ with flows setting
> ok 7 99a0 - Create SFQ with depth setting
> ok 8 7389 - Create SFQ with headdrop setting
> ok 9 6472 - Create SFQ with redflowlimit setting
> ok 10 8929 - Show SFQ class
>
> ./tdc.py -c skbprio
> ok 1 283e - Create skbprio with default setting
> ok 2 c086 - Create skbprio with limit setting
> ok 3 6733 - Change skbprio with limit setting
> ok 4 2958 - Show skbprio class
>
> ./tdc.py -c taprio
> ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
> ok 2 9462 - Add taprio Qdisc with multiple sched-entry
> ok 3 8d92 - Add taprio Qdisc with txtime-delay
> ok 4 d092 - Delete taprio Qdisc with valid handle
> ok 5 8471 - Show taprio class
> ok 6 0a85 - Add taprio Qdisc to single-queue device
>
> ./tdc.py -c tbf
> ok 1 6430 - Create TBF with default setting
> ok 2 0518 - Create TBF with mtu setting
> ok 3 320a - Create TBF with peakrate setting
> ok 4 239b - Create TBF with latency setting
> ok 5 c975 - Create TBF with overhead setting
> ok 6 948c - Create TBF with linklayer setting
> ok 7 3549 - Replace TBF with mtu
> ok 8 f948 - Change TBF with latency time
> ok 9 2348 - Show TBF class
>
> ./tdc.py -c teql
> ok 1 84a0 - Create TEQL with default setting
> ok 2 7734 - Create TEQL with multiple device
> ok 3 34a9 - Delete TEQL with valid handle
> ok 4 6289 - Show TEQL stats
>
> ---
> v2: modify subject prefix
> ---
> Zhengchao Shao (15):
> selftests/tc-testing: add selftests for atm qdisc
> selftests/tc-testing: add selftests for choke qdisc
> selftests/tc-testing: add selftests for codel qdisc
> selftests/tc-testing: add selftests for etf qdisc
> selftests/tc-testing: add selftests for fq qdisc
> selftests/tc-testing: add selftests for gred qdisc
> selftests/tc-testing: add selftests for hhf qdisc
> selftests/tc-testing: add selftests for pfifo_fast qdisc
> selftests/tc-testing: add selftests for plug qdisc
> selftests/tc-testing: add selftests for sfb qdisc
> selftests/tc-testing: add selftests for sfq qdisc
> selftests/tc-testing: add selftests for skbprio qdisc
> selftests/tc-testing: add selftests for taprio qdisc
> selftests/tc-testing: add selftests for tbf qdisc
> selftests/tc-testing: add selftests for teql qdisc
>
> .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++
> .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++
> .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++
> .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++
> .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++
> .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++
> .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++
> .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++
> .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++
> .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++
> .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++
> .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++
> .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++
> .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++
> .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++
> 15 files changed, 2735 insertions(+)
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
When adding new test case files, you should add any necessary configs
needed to
run them in tools/testing/selftests/tc-testing/config, if they aren't
already there.
For example, your ATM patch should also add the following config options
to that file:
CONFIG_ATM=y
CONFIG_NET_SCH_ATM=m
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH net-next,v2 00/15] add tc-testing qdisc test cases
2022-09-23 13:40 ` Victor Nogueira
@ 2022-09-24 2:32 ` shaozhengchao
0 siblings, 0 replies; 21+ messages in thread
From: shaozhengchao @ 2022-09-24 2:32 UTC (permalink / raw)
To: Victor Nogueira, netdev, linux-kselftest, jhs, xiyou.wangcong,
jiri, shuah
Cc: weiyongjun1, yuehaibing
On 2022/9/23 21:40, Victor Nogueira wrote:
> On 20/09/2022 23:50, Zhengchao Shao wrote:
>
>> For this patchset, test cases of the qdisc modules are added to the
>> tc-testing test suite.
>>
>> After a test case is added locally, the test result is as follows:
>>
>> ./tdc.py -c atm
>> ok 1 7628 - Create ATM with default setting
>> ok 2 390a - Delete ATM with valid handle
>> ok 3 32a0 - Show ATM class
>> ok 4 6310 - Dump ATM stats
>>
>> ./tdc.py -c choke
>> ok 1 8937 - Create CHOKE with default setting
>> ok 2 48c0 - Create CHOKE with min packet setting
>> ok 3 38c1 - Create CHOKE with max packet setting
>> ok 4 234a - Create CHOKE with ecn setting
>> ok 5 4380 - Create CHOKE with burst setting
>> ok 6 48c7 - Delete CHOKE with valid handle
>> ok 7 4398 - Replace CHOKE with min setting
>> ok 8 0301 - Change CHOKE with limit setting
>>
>> ./tdc.py -c codel
>> ok 1 983a - Create CODEL with default setting
>> ok 2 38aa - Create CODEL with limit packet setting
>> ok 3 9178 - Create CODEL with target setting
>> ok 4 78d1 - Create CODEL with interval setting
>> ok 5 238a - Create CODEL with ecn setting
>> ok 6 939c - Create CODEL with ce_threshold setting
>> ok 7 8380 - Delete CODEL with valid handle
>> ok 8 289c - Replace CODEL with limit setting
>> ok 9 0648 - Change CODEL with limit setting
>>
>> ./tdc.py -c etf
>> ok 1 34ba - Create ETF with default setting
>> ok 2 438f - Create ETF with delta nanos setting
>> ok 3 9041 - Create ETF with deadline_mode setting
>> ok 4 9a0c - Create ETF with skip_sock_check setting
>> ok 5 2093 - Delete ETF with valid handle
>>
>> ./tdc.py -c fq
>> ok 1 983b - Create FQ with default setting
>> ok 2 38a1 - Create FQ with limit packet setting
>> ok 3 0a18 - Create FQ with flow_limit setting
>> ok 4 2390 - Create FQ with quantum setting
>> ok 5 845b - Create FQ with initial_quantum setting
>> ok 6 9398 - Create FQ with maxrate setting
>> ok 7 342c - Create FQ with nopacing setting
>> ok 8 6391 - Create FQ with refill_delay setting
>> ok 9 238b - Create FQ with low_rate_threshold setting
>> ok 10 7582 - Create FQ with orphan_mask setting
>> ok 11 4894 - Create FQ with timer_slack setting
>> ok 12 324c - Create FQ with ce_threshold setting
>> ok 13 424a - Create FQ with horizon time setting
>> ok 14 89e1 - Create FQ with horizon_cap setting
>> ok 15 32e1 - Delete FQ with valid handle
>> ok 16 49b0 - Replace FQ with limit setting
>> ok 17 9478 - Change FQ with limit setting
>>
>> ./tdc.py -c gred
>> ok 1 8942 - Create GRED with default setting
>> ok 2 5783 - Create GRED with grio setting
>> ok 3 8a09 - Create GRED with limit setting
>> ok 4 48cb - Create GRED with ecn setting
>> ok 5 763a - Change GRED setting
>> ok 6 8309 - Show GRED class
>>
>> ./tdc.py -c hhf
>> ok 1 4812 - Create HHF with default setting
>> ok 2 8a92 - Create HHF with limit setting
>> ok 3 3491 - Create HHF with quantum setting
>> ok 4 ba04 - Create HHF with reset_timeout setting
>> ok 5 4238 - Create HHF with admit_bytes setting
>> ok 6 839f - Create HHF with evict_timeout setting
>> ok 7 a044 - Create HHF with non_hh_weight setting
>> ok 8 32f9 - Change HHF with limit setting
>> ok 9 385e - Show HHF class
>>
>> ./tdc.py -c pfifo_fast
>> ok 1 900c - Create pfifo_fast with default setting
>> ok 2 7470 - Dump pfifo_fast stats
>> ok 3 b974 - Replace pfifo_fast with different handle
>> ok 4 3240 - Delete pfifo_fast with valid handle
>> ok 5 4385 - Delete pfifo_fast with invalid handle
>>
>> ./tdc.py -c plug
>> ok 1 3289 - Create PLUG with default setting
>> ok 2 0917 - Create PLUG with block setting
>> ok 3 483b - Create PLUG with release setting
>> ok 4 4995 - Create PLUG with release_indefinite setting
>> ok 5 389c - Create PLUG with limit setting
>> ok 6 384a - Delete PLUG with valid handle
>> ok 7 439a - Replace PLUG with limit setting
>> ok 8 9831 - Change PLUG with limit setting
>>
>> ./tdc.py -c sfb
>> ok 1 3294 - Create SFB with default setting
>> ok 2 430a - Create SFB with rehash setting
>> ok 3 3410 - Create SFB with db setting
>> ok 4 49a0 - Create SFB with limit setting
>> ok 5 1241 - Create SFB with max setting
>> ok 6 3249 - Create SFB with target setting
>> ok 7 30a9 - Create SFB with increment setting
>> ok 8 239a - Create SFB with decrement setting
>> ok 9 9301 - Create SFB with penalty_rate setting
>> ok 10 2a01 - Create SFB with penalty_burst setting
>> ok 11 3209 - Change SFB with rehash setting
>> ok 12 5447 - Show SFB class
>>
>> ./tdc.py -c sfq
>> ok 1 7482 - Create SFQ with default setting
>> ok 2 c186 - Create SFQ with limit setting
>> ok 3 ae23 - Create SFQ with perturb setting
>> ok 4 a430 - Create SFQ with quantum setting
>> ok 5 4539 - Create SFQ with divisor setting
>> ok 6 b089 - Create SFQ with flows setting
>> ok 7 99a0 - Create SFQ with depth setting
>> ok 8 7389 - Create SFQ with headdrop setting
>> ok 9 6472 - Create SFQ with redflowlimit setting
>> ok 10 8929 - Show SFQ class
>>
>> ./tdc.py -c skbprio
>> ok 1 283e - Create skbprio with default setting
>> ok 2 c086 - Create skbprio with limit setting
>> ok 3 6733 - Change skbprio with limit setting
>> ok 4 2958 - Show skbprio class
>>
>> ./tdc.py -c taprio
>> ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
>> ok 2 9462 - Add taprio Qdisc with multiple sched-entry
>> ok 3 8d92 - Add taprio Qdisc with txtime-delay
>> ok 4 d092 - Delete taprio Qdisc with valid handle
>> ok 5 8471 - Show taprio class
>> ok 6 0a85 - Add taprio Qdisc to single-queue device
>>
>> ./tdc.py -c tbf
>> ok 1 6430 - Create TBF with default setting
>> ok 2 0518 - Create TBF with mtu setting
>> ok 3 320a - Create TBF with peakrate setting
>> ok 4 239b - Create TBF with latency setting
>> ok 5 c975 - Create TBF with overhead setting
>> ok 6 948c - Create TBF with linklayer setting
>> ok 7 3549 - Replace TBF with mtu
>> ok 8 f948 - Change TBF with latency time
>> ok 9 2348 - Show TBF class
>>
>> ./tdc.py -c teql
>> ok 1 84a0 - Create TEQL with default setting
>> ok 2 7734 - Create TEQL with multiple device
>> ok 3 34a9 - Delete TEQL with valid handle
>> ok 4 6289 - Show TEQL stats
>>
>> ---
>> v2: modify subject prefix
>> ---
>> Zhengchao Shao (15):
>> selftests/tc-testing: add selftests for atm qdisc
>> selftests/tc-testing: add selftests for choke qdisc
>> selftests/tc-testing: add selftests for codel qdisc
>> selftests/tc-testing: add selftests for etf qdisc
>> selftests/tc-testing: add selftests for fq qdisc
>> selftests/tc-testing: add selftests for gred qdisc
>> selftests/tc-testing: add selftests for hhf qdisc
>> selftests/tc-testing: add selftests for pfifo_fast qdisc
>> selftests/tc-testing: add selftests for plug qdisc
>> selftests/tc-testing: add selftests for sfb qdisc
>> selftests/tc-testing: add selftests for sfq qdisc
>> selftests/tc-testing: add selftests for skbprio qdisc
>> selftests/tc-testing: add selftests for taprio qdisc
>> selftests/tc-testing: add selftests for tbf qdisc
>> selftests/tc-testing: add selftests for teql qdisc
>>
>> .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++
>> .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++
>> .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++
>> .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++
>> .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++
>> .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++
>> .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++
>> .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++
>> .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++
>> .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++
>> .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++
>> .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++
>> .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++
>> .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++
>> .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++
>> 15 files changed, 2735 insertions(+)
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
>> create mode 100644
>> tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
>
>
> When adding new test case files, you should add any necessary configs
> needed to
> run them in tools/testing/selftests/tc-testing/config, if they aren't
> already there.
>
> For example, your ATM patch should also add the following config options
> to that file:
>
> CONFIG_ATM=y
> CONFIG_NET_SCH_ATM=m
>
>
Hi Victor：
Thank you for your testing. I will add config in V3. It might be
better to generate executable test suites based on kernel config.
However, this feature does not seem to be supported currently. Or This
feature can be added later.
Zhengchao Shao
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2022-09-24 2:32 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-21 2:50 [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 01/15] selftests/tc-testing: add selftests for atm qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 02/15] selftests/tc-testing: add selftests for choke qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 03/15] selftests/tc-testing: add selftests for codel qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 04/15] selftests/tc-testing: add selftests for etf qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 05/15] selftests/tc-testing: add selftests for fq qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 06/15] selftests/tc-testing: add selftests for gred qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 07/15] selftests/tc-testing: add selftests for hhf qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 08/15] selftests/tc-testing: add selftests for pfifo_fast qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 09/15] selftests/tc-testing: add selftests for plug qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 10/15] selftests/tc-testing: add selftests for sfb qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 11/15] selftests/tc-testing: add selftests for sfq qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 12/15] selftests/tc-testing: add selftests for skbprio qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 13/15] selftests/tc-testing: add selftests for taprio qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 14/15] selftests/tc-testing: add selftests for tbf qdisc Zhengchao Shao
2022-09-21 2:50 ` [PATCH net-next,v2 15/15] selftests/tc-testing: add selftests for teql qdisc Zhengchao Shao
2022-09-22 20:39 ` [PATCH net-next,v2 00/15] add tc-testing qdisc test cases Jakub Kicinski
2022-09-22 21:06 ` Jamal Hadi Salim
2022-09-22 21:10 ` Jakub Kicinski
2022-09-23 13:40 ` Victor Nogueira
2022-09-24 2:32 ` shaozhengchao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.