* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: cluster-devel.redhat.com
There are lots of plain text documents under Documentation/filesystems.
Manually convert several of those to ReST and add them to the index file.
Mauro Carvalho Chehab (44):
docs: filesystems: convert 9p.txt to ReST
docs: filesystems: convert adfs.txt to ReST
docs: filesystems: convert affs.txt to ReST
docs: filesystems: convert afs.txt to ReST
docs: filesystems: convert autofs-mount-control.txt to ReST
docs: filesystems: convert befs.txt to ReST
docs: filesystems: convert bfs.txt to ReST
docs: filesystems: convert btrfs.txt to ReST
docs: filesystems: convert ceph.txt to ReST
docs: filesystems: convert cramfs.txt to ReST
docs: filesystems: convert debugfs.txt to ReST
docs: filesystems: convert dlmfs.txt to ReST
docs: filesystems: convert ecryptfs.txt to ReST
docs: filesystems: convert efivarfs.txt to ReST
docs: filesystems: convert erofs.txt to ReST
docs: filesystems: convert ext2.txt to ReST
docs: filesystems: convert ext3.txt to ReST
docs: filesystems: convert f2fs.txt to ReST
docs: filesystems: convert gfs2.txt to ReST
docs: filesystems: convert gfs2-uevents.txt to ReST
docs: filesystems: convert hfsplus.txt to ReST
docs: filesystems: convert hfs.txt to ReST
docs: filesystems: convert hpfs.txt to ReST
docs: filesystems: convert inotify.txt to ReST
docs: filesystems: convert isofs.txt to ReST
docs: filesystems: convert nilfs2.txt to ReST
docs: filesystems: convert ntfs.txt to ReST
docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
docs: filesystems: convert ocfs2.txt to ReST
docs: filesystems: convert omfs.txt to ReST
docs: filesystems: convert orangefs.txt to ReST
docs: filesystems: convert proc.txt to ReST
docs: filesystems: convert qnx6.txt to ReST
docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
docs: filesystems: convert relay.txt to ReST
docs: filesystems: convert romfs.txt to ReST
docs: filesystems: convert squashfs.txt to ReST
docs: filesystems: convert sysfs.txt to ReST
docs: filesystems: convert sysv-fs.txt to ReST
docs: filesystems: convert tmpfs.txt to ReST
docs: filesystems: convert ubifs-authentication.rst.txt to ReST
docs: filesystems: convert ubifs.txt to ReST
docs: filesystems: convert udf.txt to ReST
docs: filesystems: convert zonefs.txt to ReST
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +-
.../filesystems/{adfs.txt => adfs.rst} | 29 +-
.../filesystems/{affs.txt => affs.rst} | 62 +-
.../filesystems/{afs.txt => afs.rst} | 73 +-
...t-control.txt => autofs-mount-control.rst} | 102 +-
.../filesystems/{befs.txt => befs.rst} | 59 +-
.../filesystems/{bfs.txt => bfs.rst} | 37 +-
.../filesystems/{btrfs.txt => btrfs.rst} | 3 +
.../filesystems/{ceph.txt => ceph.rst} | 26 +-
.../filesystems/{cramfs.txt => cramfs.rst} | 19 +-
.../filesystems/{debugfs.txt => debugfs.rst} | 54 +-
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +-
.../{ecryptfs.txt => ecryptfs.rst} | 44 +-
.../{efivarfs.txt => efivarfs.rst} | 5 +-
.../filesystems/{erofs.txt => erofs.rst} | 175 +-
.../filesystems/{ext2.txt => ext2.rst} | 41 +-
.../filesystems/{ext3.txt => ext3.rst} | 2 +
.../filesystems/{f2fs.txt => f2fs.rst} | 252 +--
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +-
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +-
.../filesystems/{hfs.txt => hfs.rst} | 23 +-
.../filesystems/{hfsplus.txt => hfsplus.rst} | 2 +
.../filesystems/{hpfs.txt => hpfs.rst} | 239 ++-
Documentation/filesystems/index.rst | 46 +-
.../filesystems/{inotify.txt => inotify.rst} | 33 +-
Documentation/filesystems/isofs.rst | 64 +
Documentation/filesystems/isofs.txt | 48 -
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 +-
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 +-
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +-
Documentation/filesystems/omfs.rst | 112 ++
Documentation/filesystems/omfs.txt | 106 --
.../{orangefs.txt => orangefs.rst} | 187 +-
.../filesystems/{proc.txt => proc.rst} | 1498 +++++++++--------
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +-
.../filesystems/{relay.txt => relay.rst} | 129 +-
.../filesystems/{romfs.txt => romfs.rst} | 42 +-
.../{squashfs.txt => squashfs.rst} | 60 +-
.../filesystems/{sysfs.txt => sysfs.rst} | 324 ++--
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +-
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 +-
.../filesystems/ubifs-authentication.rst | 10 +-
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +-
.../filesystems/{udf.txt => udf.rst} | 21 +-
.../filesystems/{zonefs.txt => zonefs.rst} | 106 +-
47 files changed, 2739 insertions(+), 2035 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
rename Documentation/filesystems/{proc.txt => proc.rst} (65%)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
--
2.24.1
^ permalink raw reply [flat|nested] 112+ messages in thread* [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Dominique Martinet, Amir Goldstein, Bob Copeland, David Howells,
Joseph Qi, linux-mtd, Tyler Hicks, linux-afs, Mike Marshall,
Naohiro Aota, Christoph Hellwig, linux-nilfs,
Andreas Gruenbacher, Sage Weil, Jonathan Corbet,
Mauro Carvalho Chehab, Richard Weinberger, Mark Fasheh,
Chris Mason, Ryusuke Konishi, cluster-devel, v9fs-developer,
Gao Xiang, linux-ext4, Salah Triki, Alexey Dobriyan, devel,
ecryptfs, Eric Van Hensbergen, Josef Bacik, linux-fsdevel,
Joel Becker, Tigran A. Aivazian, David Sterba, Jaegeuk Kim,
ceph-devel, Ilya Dryomov, Anton Altaparmakov, Damien Le Moal,
Luis de Bethencourt, Nicolas Pitre, linux-ntfs-dev, Jeff Layton,
linux-f2fs-devel, linux-btrfs, Jan Kara, Bob Peterson,
Phillip Lougher, Johannes Thumshirn, linux-erofs,
linux-karma-devel, ocfs2-devel
There are lots of plain text documents under Documentation/filesystems.
Manually convert several of those to ReST and add them to the index file.
Mauro Carvalho Chehab (44):
docs: filesystems: convert 9p.txt to ReST
docs: filesystems: convert adfs.txt to ReST
docs: filesystems: convert affs.txt to ReST
docs: filesystems: convert afs.txt to ReST
docs: filesystems: convert autofs-mount-control.txt to ReST
docs: filesystems: convert befs.txt to ReST
docs: filesystems: convert bfs.txt to ReST
docs: filesystems: convert btrfs.txt to ReST
docs: filesystems: convert ceph.txt to ReST
docs: filesystems: convert cramfs.txt to ReST
docs: filesystems: convert debugfs.txt to ReST
docs: filesystems: convert dlmfs.txt to ReST
docs: filesystems: convert ecryptfs.txt to ReST
docs: filesystems: convert efivarfs.txt to ReST
docs: filesystems: convert erofs.txt to ReST
docs: filesystems: convert ext2.txt to ReST
docs: filesystems: convert ext3.txt to ReST
docs: filesystems: convert f2fs.txt to ReST
docs: filesystems: convert gfs2.txt to ReST
docs: filesystems: convert gfs2-uevents.txt to ReST
docs: filesystems: convert hfsplus.txt to ReST
docs: filesystems: convert hfs.txt to ReST
docs: filesystems: convert hpfs.txt to ReST
docs: filesystems: convert inotify.txt to ReST
docs: filesystems: convert isofs.txt to ReST
docs: filesystems: convert nilfs2.txt to ReST
docs: filesystems: convert ntfs.txt to ReST
docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
docs: filesystems: convert ocfs2.txt to ReST
docs: filesystems: convert omfs.txt to ReST
docs: filesystems: convert orangefs.txt to ReST
docs: filesystems: convert proc.txt to ReST
docs: filesystems: convert qnx6.txt to ReST
docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
docs: filesystems: convert relay.txt to ReST
docs: filesystems: convert romfs.txt to ReST
docs: filesystems: convert squashfs.txt to ReST
docs: filesystems: convert sysfs.txt to ReST
docs: filesystems: convert sysv-fs.txt to ReST
docs: filesystems: convert tmpfs.txt to ReST
docs: filesystems: convert ubifs-authentication.rst.txt to ReST
docs: filesystems: convert ubifs.txt to ReST
docs: filesystems: convert udf.txt to ReST
docs: filesystems: convert zonefs.txt to ReST
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +-
.../filesystems/{adfs.txt => adfs.rst} | 29 +-
.../filesystems/{affs.txt => affs.rst} | 62 +-
.../filesystems/{afs.txt => afs.rst} | 73 +-
...t-control.txt => autofs-mount-control.rst} | 102 +-
.../filesystems/{befs.txt => befs.rst} | 59 +-
.../filesystems/{bfs.txt => bfs.rst} | 37 +-
.../filesystems/{btrfs.txt => btrfs.rst} | 3 +
.../filesystems/{ceph.txt => ceph.rst} | 26 +-
.../filesystems/{cramfs.txt => cramfs.rst} | 19 +-
.../filesystems/{debugfs.txt => debugfs.rst} | 54 +-
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +-
.../{ecryptfs.txt => ecryptfs.rst} | 44 +-
.../{efivarfs.txt => efivarfs.rst} | 5 +-
.../filesystems/{erofs.txt => erofs.rst} | 175 +-
.../filesystems/{ext2.txt => ext2.rst} | 41 +-
.../filesystems/{ext3.txt => ext3.rst} | 2 +
.../filesystems/{f2fs.txt => f2fs.rst} | 252 +--
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +-
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +-
.../filesystems/{hfs.txt => hfs.rst} | 23 +-
.../filesystems/{hfsplus.txt => hfsplus.rst} | 2 +
.../filesystems/{hpfs.txt => hpfs.rst} | 239 ++-
Documentation/filesystems/index.rst | 46 +-
.../filesystems/{inotify.txt => inotify.rst} | 33 +-
Documentation/filesystems/isofs.rst | 64 +
Documentation/filesystems/isofs.txt | 48 -
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 +-
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 +-
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +-
Documentation/filesystems/omfs.rst | 112 ++
Documentation/filesystems/omfs.txt | 106 --
.../{orangefs.txt => orangefs.rst} | 187 +-
.../filesystems/{proc.txt => proc.rst} | 1498 +++++++++--------
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +-
.../filesystems/{relay.txt => relay.rst} | 129 +-
.../filesystems/{romfs.txt => romfs.rst} | 42 +-
.../{squashfs.txt => squashfs.rst} | 60 +-
.../filesystems/{sysfs.txt => sysfs.rst} | 324 ++--
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +-
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 +-
.../filesystems/ubifs-authentication.rst | 10 +-
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +-
.../filesystems/{udf.txt => udf.rst} | 21 +-
.../filesystems/{zonefs.txt => zonefs.rst} | 106 +-
47 files changed, 2739 insertions(+), 2035 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
rename Documentation/filesystems/{proc.txt => proc.rst} (65%)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
--
2.24.1
^ permalink raw reply [flat|nested] 112+ messages in thread* [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Dominique Martinet, Amir Goldstein, Bob Copeland, David Howells,
Joseph Qi, linux-mtd, Tyler Hicks, linux-afs, Mike Marshall,
Naohiro Aota, Christoph Hellwig, linux-nilfs,
Andreas Gruenbacher, Sage Weil, Jonathan Corbet,
Mauro Carvalho Chehab, Richard Weinberger, Mark Fasheh,
Chris Mason, Ryusuke Konishi, cluster-devel, v9fs-developer,
Gao Xiang, linux-ext4, Salah Triki, Alexey Dobriyan, devel,
ecryptfs, Eric Van Hensbergen, Chao Yu, Josef Bacik,
linux-fsdevel, Joel Becker, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ilya Dryomov, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, linux-btrfs,
Jan Kara, Bob Peterson, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, ocfs2-devel
There are lots of plain text documents under Documentation/filesystems.
Manually convert several of those to ReST and add them to the index file.
Mauro Carvalho Chehab (44):
docs: filesystems: convert 9p.txt to ReST
docs: filesystems: convert adfs.txt to ReST
docs: filesystems: convert affs.txt to ReST
docs: filesystems: convert afs.txt to ReST
docs: filesystems: convert autofs-mount-control.txt to ReST
docs: filesystems: convert befs.txt to ReST
docs: filesystems: convert bfs.txt to ReST
docs: filesystems: convert btrfs.txt to ReST
docs: filesystems: convert ceph.txt to ReST
docs: filesystems: convert cramfs.txt to ReST
docs: filesystems: convert debugfs.txt to ReST
docs: filesystems: convert dlmfs.txt to ReST
docs: filesystems: convert ecryptfs.txt to ReST
docs: filesystems: convert efivarfs.txt to ReST
docs: filesystems: convert erofs.txt to ReST
docs: filesystems: convert ext2.txt to ReST
docs: filesystems: convert ext3.txt to ReST
docs: filesystems: convert f2fs.txt to ReST
docs: filesystems: convert gfs2.txt to ReST
docs: filesystems: convert gfs2-uevents.txt to ReST
docs: filesystems: convert hfsplus.txt to ReST
docs: filesystems: convert hfs.txt to ReST
docs: filesystems: convert hpfs.txt to ReST
docs: filesystems: convert inotify.txt to ReST
docs: filesystems: convert isofs.txt to ReST
docs: filesystems: convert nilfs2.txt to ReST
docs: filesystems: convert ntfs.txt to ReST
docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
docs: filesystems: convert ocfs2.txt to ReST
docs: filesystems: convert omfs.txt to ReST
docs: filesystems: convert orangefs.txt to ReST
docs: filesystems: convert proc.txt to ReST
docs: filesystems: convert qnx6.txt to ReST
docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
docs: filesystems: convert relay.txt to ReST
docs: filesystems: convert romfs.txt to ReST
docs: filesystems: convert squashfs.txt to ReST
docs: filesystems: convert sysfs.txt to ReST
docs: filesystems: convert sysv-fs.txt to ReST
docs: filesystems: convert tmpfs.txt to ReST
docs: filesystems: convert ubifs-authentication.rst.txt to ReST
docs: filesystems: convert ubifs.txt to ReST
docs: filesystems: convert udf.txt to ReST
docs: filesystems: convert zonefs.txt to ReST
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +-
.../filesystems/{adfs.txt => adfs.rst} | 29 +-
.../filesystems/{affs.txt => affs.rst} | 62 +-
.../filesystems/{afs.txt => afs.rst} | 73 +-
...t-control.txt => autofs-mount-control.rst} | 102 +-
.../filesystems/{befs.txt => befs.rst} | 59 +-
.../filesystems/{bfs.txt => bfs.rst} | 37 +-
.../filesystems/{btrfs.txt => btrfs.rst} | 3 +
.../filesystems/{ceph.txt => ceph.rst} | 26 +-
.../filesystems/{cramfs.txt => cramfs.rst} | 19 +-
.../filesystems/{debugfs.txt => debugfs.rst} | 54 +-
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +-
.../{ecryptfs.txt => ecryptfs.rst} | 44 +-
.../{efivarfs.txt => efivarfs.rst} | 5 +-
.../filesystems/{erofs.txt => erofs.rst} | 175 +-
.../filesystems/{ext2.txt => ext2.rst} | 41 +-
.../filesystems/{ext3.txt => ext3.rst} | 2 +
.../filesystems/{f2fs.txt => f2fs.rst} | 252 +--
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +-
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +-
.../filesystems/{hfs.txt => hfs.rst} | 23 +-
.../filesystems/{hfsplus.txt => hfsplus.rst} | 2 +
.../filesystems/{hpfs.txt => hpfs.rst} | 239 ++-
Documentation/filesystems/index.rst | 46 +-
.../filesystems/{inotify.txt => inotify.rst} | 33 +-
Documentation/filesystems/isofs.rst | 64 +
Documentation/filesystems/isofs.txt | 48 -
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 +-
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 +-
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +-
Documentation/filesystems/omfs.rst | 112 ++
Documentation/filesystems/omfs.txt | 106 --
.../{orangefs.txt => orangefs.rst} | 187 +-
.../filesystems/{proc.txt => proc.rst} | 1498 +++++++++--------
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +-
.../filesystems/{relay.txt => relay.rst} | 129 +-
.../filesystems/{romfs.txt => romfs.rst} | 42 +-
.../{squashfs.txt => squashfs.rst} | 60 +-
.../filesystems/{sysfs.txt => sysfs.rst} | 324 ++--
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +-
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 +-
.../filesystems/ubifs-authentication.rst | 10 +-
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +-
.../filesystems/{udf.txt => udf.rst} | 21 +-
.../filesystems/{zonefs.txt => zonefs.rst} | 106 +-
47 files changed, 2739 insertions(+), 2035 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
rename Documentation/filesystems/{proc.txt => proc.rst} (65%)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
--
2.24.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Dominique Martinet, Amir Goldstein, Bob Copeland, David Howells,
Joseph Qi, linux-mtd, Tyler Hicks, linux-afs, Mike Marshall,
Naohiro Aota, Christoph Hellwig, linux-nilfs,
Andreas Gruenbacher, Sage Weil, Jonathan Corbet,
Mauro Carvalho Chehab, Richard Weinberger, Mark Fasheh,
Chris Mason, Ryusuke Konishi, cluster-devel, v9fs-developer,
Gao Xiang, linux-ext4, Salah Triki, Alexey Dobriyan, devel,
ecryptfs, Eric Van Hensbergen, Josef Bacik, linux-fsdevel,
Joel Becker, Tigran A. Aivazian, David Sterba, Jaegeuk Kim,
ceph-devel, Ilya Dryomov, Anton Altaparmakov, Damien Le Moal,
Luis de Bethencourt, Nicolas Pitre, linux-ntfs-dev, Jeff Layton,
linux-f2fs-devel, linux-btrfs, Jan Kara, Bob Peterson,
Phillip Lougher, Johannes Thumshirn, linux-erofs,
linux-karma-devel, ocfs2-devel
There are lots of plain text documents under Documentation/filesystems.
Manually convert several of those to ReST and add them to the index file.
Mauro Carvalho Chehab (44):
docs: filesystems: convert 9p.txt to ReST
docs: filesystems: convert adfs.txt to ReST
docs: filesystems: convert affs.txt to ReST
docs: filesystems: convert afs.txt to ReST
docs: filesystems: convert autofs-mount-control.txt to ReST
docs: filesystems: convert befs.txt to ReST
docs: filesystems: convert bfs.txt to ReST
docs: filesystems: convert btrfs.txt to ReST
docs: filesystems: convert ceph.txt to ReST
docs: filesystems: convert cramfs.txt to ReST
docs: filesystems: convert debugfs.txt to ReST
docs: filesystems: convert dlmfs.txt to ReST
docs: filesystems: convert ecryptfs.txt to ReST
docs: filesystems: convert efivarfs.txt to ReST
docs: filesystems: convert erofs.txt to ReST
docs: filesystems: convert ext2.txt to ReST
docs: filesystems: convert ext3.txt to ReST
docs: filesystems: convert f2fs.txt to ReST
docs: filesystems: convert gfs2.txt to ReST
docs: filesystems: convert gfs2-uevents.txt to ReST
docs: filesystems: convert hfsplus.txt to ReST
docs: filesystems: convert hfs.txt to ReST
docs: filesystems: convert hpfs.txt to ReST
docs: filesystems: convert inotify.txt to ReST
docs: filesystems: convert isofs.txt to ReST
docs: filesystems: convert nilfs2.txt to ReST
docs: filesystems: convert ntfs.txt to ReST
docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
docs: filesystems: convert ocfs2.txt to ReST
docs: filesystems: convert omfs.txt to ReST
docs: filesystems: convert orangefs.txt to ReST
docs: filesystems: convert proc.txt to ReST
docs: filesystems: convert qnx6.txt to ReST
docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
docs: filesystems: convert relay.txt to ReST
docs: filesystems: convert romfs.txt to ReST
docs: filesystems: convert squashfs.txt to ReST
docs: filesystems: convert sysfs.txt to ReST
docs: filesystems: convert sysv-fs.txt to ReST
docs: filesystems: convert tmpfs.txt to ReST
docs: filesystems: convert ubifs-authentication.rst.txt to ReST
docs: filesystems: convert ubifs.txt to ReST
docs: filesystems: convert udf.txt to ReST
docs: filesystems: convert zonefs.txt to ReST
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +-
.../filesystems/{adfs.txt => adfs.rst} | 29 +-
.../filesystems/{affs.txt => affs.rst} | 62 +-
.../filesystems/{afs.txt => afs.rst} | 73 +-
...t-control.txt => autofs-mount-control.rst} | 102 +-
.../filesystems/{befs.txt => befs.rst} | 59 +-
.../filesystems/{bfs.txt => bfs.rst} | 37 +-
.../filesystems/{btrfs.txt => btrfs.rst} | 3 +
.../filesystems/{ceph.txt => ceph.rst} | 26 +-
.../filesystems/{cramfs.txt => cramfs.rst} | 19 +-
.../filesystems/{debugfs.txt => debugfs.rst} | 54 +-
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +-
.../{ecryptfs.txt => ecryptfs.rst} | 44 +-
.../{efivarfs.txt => efivarfs.rst} | 5 +-
.../filesystems/{erofs.txt => erofs.rst} | 175 +-
.../filesystems/{ext2.txt => ext2.rst} | 41 +-
.../filesystems/{ext3.txt => ext3.rst} | 2 +
.../filesystems/{f2fs.txt => f2fs.rst} | 252 +--
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +-
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +-
.../filesystems/{hfs.txt => hfs.rst} | 23 +-
.../filesystems/{hfsplus.txt => hfsplus.rst} | 2 +
.../filesystems/{hpfs.txt => hpfs.rst} | 239 ++-
Documentation/filesystems/index.rst | 46 +-
.../filesystems/{inotify.txt => inotify.rst} | 33 +-
Documentation/filesystems/isofs.rst | 64 +
Documentation/filesystems/isofs.txt | 48 -
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 +-
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 +-
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +-
Documentation/filesystems/omfs.rst | 112 ++
Documentation/filesystems/omfs.txt | 106 --
.../{orangefs.txt => orangefs.rst} | 187 +-
.../filesystems/{proc.txt => proc.rst} | 1498 +++++++++--------
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +-
.../filesystems/{relay.txt => relay.rst} | 129 +-
.../filesystems/{romfs.txt => romfs.rst} | 42 +-
.../{squashfs.txt => squashfs.rst} | 60 +-
.../filesystems/{sysfs.txt => sysfs.rst} | 324 ++--
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +-
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 +-
.../filesystems/ubifs-authentication.rst | 10 +-
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +-
.../filesystems/{udf.txt => udf.rst} | 21 +-
.../filesystems/{zonefs.txt => zonefs.rst} | 106 +-
47 files changed, 2739 insertions(+), 2035 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
rename Documentation/filesystems/{proc.txt => proc.rst} (65%)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
--
2.24.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: ocfs2-devel
There are lots of plain text documents under Documentation/filesystems.
Manually convert several of those to ReST and add them to the index file.
Mauro Carvalho Chehab (44):
docs: filesystems: convert 9p.txt to ReST
docs: filesystems: convert adfs.txt to ReST
docs: filesystems: convert affs.txt to ReST
docs: filesystems: convert afs.txt to ReST
docs: filesystems: convert autofs-mount-control.txt to ReST
docs: filesystems: convert befs.txt to ReST
docs: filesystems: convert bfs.txt to ReST
docs: filesystems: convert btrfs.txt to ReST
docs: filesystems: convert ceph.txt to ReST
docs: filesystems: convert cramfs.txt to ReST
docs: filesystems: convert debugfs.txt to ReST
docs: filesystems: convert dlmfs.txt to ReST
docs: filesystems: convert ecryptfs.txt to ReST
docs: filesystems: convert efivarfs.txt to ReST
docs: filesystems: convert erofs.txt to ReST
docs: filesystems: convert ext2.txt to ReST
docs: filesystems: convert ext3.txt to ReST
docs: filesystems: convert f2fs.txt to ReST
docs: filesystems: convert gfs2.txt to ReST
docs: filesystems: convert gfs2-uevents.txt to ReST
docs: filesystems: convert hfsplus.txt to ReST
docs: filesystems: convert hfs.txt to ReST
docs: filesystems: convert hpfs.txt to ReST
docs: filesystems: convert inotify.txt to ReST
docs: filesystems: convert isofs.txt to ReST
docs: filesystems: convert nilfs2.txt to ReST
docs: filesystems: convert ntfs.txt to ReST
docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
docs: filesystems: convert ocfs2.txt to ReST
docs: filesystems: convert omfs.txt to ReST
docs: filesystems: convert orangefs.txt to ReST
docs: filesystems: convert proc.txt to ReST
docs: filesystems: convert qnx6.txt to ReST
docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
docs: filesystems: convert relay.txt to ReST
docs: filesystems: convert romfs.txt to ReST
docs: filesystems: convert squashfs.txt to ReST
docs: filesystems: convert sysfs.txt to ReST
docs: filesystems: convert sysv-fs.txt to ReST
docs: filesystems: convert tmpfs.txt to ReST
docs: filesystems: convert ubifs-authentication.rst.txt to ReST
docs: filesystems: convert ubifs.txt to ReST
docs: filesystems: convert udf.txt to ReST
docs: filesystems: convert zonefs.txt to ReST
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +-
.../filesystems/{adfs.txt => adfs.rst} | 29 +-
.../filesystems/{affs.txt => affs.rst} | 62 +-
.../filesystems/{afs.txt => afs.rst} | 73 +-
...t-control.txt => autofs-mount-control.rst} | 102 +-
.../filesystems/{befs.txt => befs.rst} | 59 +-
.../filesystems/{bfs.txt => bfs.rst} | 37 +-
.../filesystems/{btrfs.txt => btrfs.rst} | 3 +
.../filesystems/{ceph.txt => ceph.rst} | 26 +-
.../filesystems/{cramfs.txt => cramfs.rst} | 19 +-
.../filesystems/{debugfs.txt => debugfs.rst} | 54 +-
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +-
.../{ecryptfs.txt => ecryptfs.rst} | 44 +-
.../{efivarfs.txt => efivarfs.rst} | 5 +-
.../filesystems/{erofs.txt => erofs.rst} | 175 +-
.../filesystems/{ext2.txt => ext2.rst} | 41 +-
.../filesystems/{ext3.txt => ext3.rst} | 2 +
.../filesystems/{f2fs.txt => f2fs.rst} | 252 +--
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +-
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +-
.../filesystems/{hfs.txt => hfs.rst} | 23 +-
.../filesystems/{hfsplus.txt => hfsplus.rst} | 2 +
.../filesystems/{hpfs.txt => hpfs.rst} | 239 ++-
Documentation/filesystems/index.rst | 46 +-
.../filesystems/{inotify.txt => inotify.rst} | 33 +-
Documentation/filesystems/isofs.rst | 64 +
Documentation/filesystems/isofs.txt | 48 -
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 +-
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 +-
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +-
Documentation/filesystems/omfs.rst | 112 ++
Documentation/filesystems/omfs.txt | 106 --
.../{orangefs.txt => orangefs.rst} | 187 +-
.../filesystems/{proc.txt => proc.rst} | 1498 +++++++++--------
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +-
.../filesystems/{relay.txt => relay.rst} | 129 +-
.../filesystems/{romfs.txt => romfs.rst} | 42 +-
.../{squashfs.txt => squashfs.rst} | 60 +-
.../filesystems/{sysfs.txt => sysfs.rst} | 324 ++--
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +-
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 +-
.../filesystems/ubifs-authentication.rst | 10 +-
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +-
.../filesystems/{udf.txt => udf.rst} | 21 +-
.../filesystems/{zonefs.txt => zonefs.rst} | 106 +-
47 files changed, 2739 insertions(+), 2035 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
rename Documentation/filesystems/{proc.txt => proc.rst} (65%)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
--
2.24.1
^ permalink raw reply [flat|nested] 112+ messages in thread* [PATCH 01/44] docs: filesystems: convert 9p.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (4 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Eric Van Hensbergen, Latchesar Ionkov, Dominique Martinet,
v9fs-developer
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/{9p.txt => 9p.rst} | 114 +++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 70 insertions(+), 45 deletions(-)
rename Documentation/filesystems/{9p.txt => 9p.rst} (63%)
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.rst
similarity index 63%
rename from Documentation/filesystems/9p.txt
rename to Documentation/filesystems/9p.rst
index fec7144e817c..f054d1c45e86 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.rst
@@ -1,7 +1,10 @@
- v9fs: Plan 9 Resource Sharing for Linux
- =======================================
+.. SPDX-License-Identifier: GPL-2.0
-ABOUT
+=======================================
+v9fs: Plan 9 Resource Sharing for Linux
+=======================================
+
+About
=====
v9fs is a Unix implementation of the Plan 9 9p remote filesystem protocol.
@@ -14,32 +17,34 @@ and Maya Gokhale. Additional development by Greg Watson
The best detailed explanation of the Linux implementation and applications of
the 9p client is available in the form of a USENIX paper:
+
http://www.usenix.org/events/usenix05/tech/freenix/hensbergen.html
Other applications are described in the following papers:
+
* XCPU & Clustering
- http://xcpu.org/papers/xcpu-talk.pdf
+ http://xcpu.org/papers/xcpu-talk.pdf
* KVMFS: control file system for KVM
- http://xcpu.org/papers/kvmfs.pdf
+ http://xcpu.org/papers/kvmfs.pdf
* CellFS: A New Programming Model for the Cell BE
- http://xcpu.org/papers/cellfs-talk.pdf
+ http://xcpu.org/papers/cellfs-talk.pdf
* PROSE I/O: Using 9p to enable Application Partitions
- http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
+ http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
* VirtFS: A Virtualization Aware File System pass-through
- http://goo.gl/3WPDg
+ http://goo.gl/3WPDg
-USAGE
+Usage
=====
-For remote file server:
+For remote file server::
mount -t 9p 10.10.1.2 /mnt/9
-For Plan 9 From User Space applications (http://swtch.com/plan9)
+For Plan 9 From User Space applications (http://swtch.com/plan9)::
mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
-For server running on QEMU host with virtio transport:
+For server running on QEMU host with virtio transport::
mount -t 9p -o trans=virtio <mount_tag> /mnt/9
@@ -48,18 +53,22 @@ mount points. Each 9P export is seen by the client as a virtio device with an
associated "mount_tag" property. Available mount tags can be
seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
-OPTIONS
+Options
=======
+ ============= ===============================================================
trans=name select an alternative transport. Valid options are
currently:
- unix - specifying a named pipe mount point
- tcp - specifying a normal TCP/IP connection
- fd - used passed file descriptors for connection
- (see rfdno and wfdno)
- virtio - connect to the next virtio channel available
- (from QEMU with trans_virtio module)
- rdma - connect to a specified RDMA channel
+
+ ======== ============================================
+ unix specifying a named pipe mount point
+ tcp specifying a normal TCP/IP connection
+ fd used passed file descriptors for connection
+ (see rfdno and wfdno)
+ virtio connect to the next virtio channel available
+ (from QEMU with trans_virtio module)
+ rdma connect to a specified RDMA channel
+ ======== ============================================
uname=name user name to attempt mount as on the remote server. The
server may override or ignore this value. Certain user
@@ -69,28 +78,36 @@ OPTIONS
offering several exported file systems.
cache=mode specifies a caching policy. By default, no caches are used.
- none = default no cache policy, metadata and data
+
+ none
+ default no cache policy, metadata and data
alike are synchronous.
- loose = no attempts are made at consistency,
+ loose
+ no attempts are made at consistency,
intended for exclusive, read-only mounts
- fscache = use FS-Cache for a persistent, read-only
+ fscache
+ use FS-Cache for a persistent, read-only
cache backend.
- mmap = minimal cache that is only used for read-write
+ mmap
+ minimal cache that is only used for read-write
mmap. Northing else is cached, like cache=none
debug=n specifies debug level. The debug level is a bitmask.
- 0x01 = display verbose error messages
- 0x02 = developer debug (DEBUG_CURRENT)
- 0x04 = display 9p trace
- 0x08 = display VFS trace
- 0x10 = display Marshalling debug
- 0x20 = display RPC debug
- 0x40 = display transport debug
- 0x80 = display allocation debug
- 0x100 = display protocol message debug
- 0x200 = display Fid debug
- 0x400 = display packet debug
- 0x800 = display fscache tracing debug
+
+ ===== ================================
+ 0x01 display verbose error messages
+ 0x02 developer debug (DEBUG_CURRENT)
+ 0x04 display 9p trace
+ 0x08 display VFS trace
+ 0x10 display Marshalling debug
+ 0x20 display RPC debug
+ 0x40 display transport debug
+ 0x80 display allocation debug
+ 0x100 display protocol message debug
+ 0x200 display Fid debug
+ 0x400 display packet debug
+ 0x800 display fscache tracing debug
+ ===== ================================
rfdno=n the file descriptor for reading with trans=fd
@@ -103,9 +120,12 @@ OPTIONS
noextend force legacy mode (no 9p2000.u or 9p2000.L semantics)
version=name Select 9P protocol version. Valid options are:
- 9p2000 - Legacy mode (same as noextend)
- 9p2000.u - Use 9P2000.u protocol
- 9p2000.L - Use 9P2000.L protocol
+
+ ======== ==============================
+ 9p2000 Legacy mode (same as noextend)
+ 9p2000.u Use 9P2000.u protocol
+ 9p2000.L Use 9P2000.L protocol
+ ======== ==============================
dfltuid attempt to mount as a particular uid
@@ -118,22 +138,27 @@ OPTIONS
hosts. This functionality will be expanded in later versions.
access there are four access modes.
- user = if a user tries to access a file on v9fs
+ user
+ if a user tries to access a file on v9fs
filesystem for the first time, v9fs sends an
attach command (Tattach) for that user.
This is the default mode.
- <uid> = allows only user with uid=<uid> to access
+ <uid>
+ allows only user with uid=<uid> to access
the files on the mounted filesystem
- any = v9fs does single attach and performs all
+ any
+ v9fs does single attach and performs all
operations as one user
- client = ACL based access check on the 9p client
+ clien
+ ACL based access check on the 9p client
side for access validation
cachetag cache tag to use the specified persistent cache.
cache tags for existing cache sessions can be listed at
/sys/fs/9p/caches. (applies only to cache=fscache)
+ ============= ===============================================================
-RESOURCES
+Resources
=========
Protocol specifications are maintained on github:
@@ -158,4 +183,3 @@ http://plan9.bell-labs.com/plan9
For information on Plan 9 from User Space (Plan 9 applications and libraries
ported to Linux/BSD/OSX/etc) check out http://swtch.com/plan9
-
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 45d791905e91..a9330c3f8c2e 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -46,6 +46,7 @@ Documentation for filesystem implementations.
.. toctree::
:maxdepth: 2
+ 9p
autofs
fuse
overlayfs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 02/44] docs: filesystems: convert adfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (5 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{adfs.txt => adfs.rst} | 29 ++++++++++++-------
Documentation/filesystems/index.rst | 1 +
2 files changed, 20 insertions(+), 10 deletions(-)
rename Documentation/filesystems/{adfs.txt => adfs.rst} (85%)
diff --git a/Documentation/filesystems/adfs.txt b/Documentation/filesystems/adfs.rst
similarity index 85%
rename from Documentation/filesystems/adfs.txt
rename to Documentation/filesystems/adfs.rst
index 0baa8e8c1fc1..5b22cae38e5e 100644
--- a/Documentation/filesystems/adfs.txt
+++ b/Documentation/filesystems/adfs.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+Acorn Disc Filing System - ADFS
+===============================
+
Filesystems supported by ADFS
-----------------------------
@@ -25,6 +31,7 @@ directory updates, specifically updating the access mode and timestamp.
Mount options for ADFS
----------------------
+ ============ ======================================================
uid=nnn All files in the partition will be owned by
user id nnn. Default 0 (root).
gid=nnn All files in the partition will be in group
@@ -36,22 +43,23 @@ Mount options for ADFS
ftsuffix=n When ftsuffix=0, no file type suffix will be applied.
When ftsuffix=1, a hexadecimal suffix corresponding to
the RISC OS file type will be added. Default 0.
+ ============ ======================================================
Mapping of ADFS permissions to Linux permissions
------------------------------------------------
ADFS permissions consist of the following:
- Owner read
- Owner write
- Other read
- Other write
+ - Owner read
+ - Owner write
+ - Other read
+ - Other write
(In older versions, an 'execute' permission did exist, but this
- does not hold the same meaning as the Linux 'execute' permission
- and is now obsolete).
+ does not hold the same meaning as the Linux 'execute' permission
+ and is now obsolete).
- The mapping is performed as follows:
+ The mapping is performed as follows::
Owner read -> -r--r--r--
Owner write -> --w--w---w
@@ -66,17 +74,18 @@ Mapping of ADFS permissions to Linux permissions
Possible other mode permissions -> ----rwxrwx
Hence, with the default masks, if a file is owner read/write, and
- not a UnixExec filetype, then the permissions will be:
+ not a UnixExec filetype, then the permissions will be::
-rw-------
However, if the masks were ownmask=0770,othmask=0007, then this would
- be modified to:
+ be modified to::
+
-rw-rw----
There is no restriction on what you can do with these masks. You may
wish that either read bits give read access to the file for all, but
- keep the default write protection (ownmask=0755,othmask=0577):
+ keep the default write protection (ownmask=0755,othmask=0577)::
-rw-r--r--
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index a9330c3f8c2e..14dc89c94822 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -47,6 +47,7 @@ Documentation for filesystem implementations.
:maxdepth: 2
9p
+ adfs
autofs
fuse
overlayfs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 03/44] docs: filesystems: convert affs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (6 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
2020-02-18 13:04 ` David Sterba
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, David Sterba
- Add a SPDX header;
- Adjust document title;
- Add table markups;
- Mark literal blocks as such;
- Some whitespace fixes and new line breaks;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{affs.txt => affs.rst} | 62 +++++++++++++------
Documentation/filesystems/index.rst | 1 +
2 files changed, 44 insertions(+), 19 deletions(-)
rename Documentation/filesystems/{affs.txt => affs.rst} (86%)
diff --git a/Documentation/filesystems/affs.txt b/Documentation/filesystems/affs.rst
similarity index 86%
rename from Documentation/filesystems/affs.txt
rename to Documentation/filesystems/affs.rst
index 71b63c2b9841..7f1a40dce6d3 100644
--- a/Documentation/filesystems/affs.txt
+++ b/Documentation/filesystems/affs.rst
@@ -1,9 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
Overview of Amiga Filesystems
=============================
Not all varieties of the Amiga filesystems are supported for reading and
writing. The Amiga currently knows six different filesystems:
+============== ===============================================================
DOS\0 The old or original filesystem, not really suited for
hard disks and normally not used on them, either.
Supported read/write.
@@ -23,6 +27,7 @@ DOS\4 The original filesystem with directory cache. The directory
sense on hard disks. Supported read only.
DOS\5 The Fast File System with directory cache. Supported read only.
+============== ===============================================================
All of the above filesystems allow block sizes from 512 to 32K bytes.
Supported block sizes are: 512, 1024, 2048 and 4096 bytes. Larger blocks
@@ -36,14 +41,18 @@ are supported, too.
Mount options for the AFFS
==========================
-protect If this option is set, the protection bits cannot be altered.
+protect
+ If this option is set, the protection bits cannot be altered.
-setuid[=uid] This sets the owner of all files and directories in the file
+setuid[=uid]
+ This sets the owner of all files and directories in the file
system to uid or the uid of the current user, respectively.
-setgid[=gid] Same as above, but for gid.
+setgid[=gid]
+ Same as above, but for gid.
-mode=mode Sets the mode flags to the given (octal) value, regardless
+mode=mode
+ Sets the mode flags to the given (octal) value, regardless
of the original permissions. Directories will get an x
permission if the corresponding r bit is set.
This is useful since most of the plain AmigaOS files
@@ -53,33 +62,41 @@ nofilenametruncate
The file system will return an error when filename exceeds
standard maximum filename length (30 characters).
-reserved=num Sets the number of reserved blocks at the start of the
+reserved=num
+ Sets the number of reserved blocks at the start of the
partition to num. You should never need this option.
Default is 2.
-root=block Sets the block number of the root block. This should never
+root=block
+ Sets the block number of the root block. This should never
be necessary.
-bs=blksize Sets the blocksize to blksize. Valid block sizes are 512,
+bs=blksize
+ Sets the blocksize to blksize. Valid block sizes are 512,
1024, 2048 and 4096. Like the root option, this should
never be necessary, as the affs can figure it out itself.
-quiet The file system will not return an error for disallowed
+quiet
+ The file system will not return an error for disallowed
mode changes.
-verbose The volume name, file system type and block size will
+verbose
+ The volume name, file system type and block size will
be written to the syslog when the filesystem is mounted.
-mufs The filesystem is really a muFS, also it doesn't
+mufs
+ The filesystem is really a muFS, also it doesn't
identify itself as one. This option is necessary if
the filesystem wasn't formatted as muFS, but is used
as one.
-prefix=path Path will be prefixed to every absolute path name of
+prefix=path
+ Path will be prefixed to every absolute path name of
symbolic links on an AFFS partition. Default = "/".
(See below.)
-volume=name When symbolic links with an absolute path are created
+volume=name
+ When symbolic links with an absolute path are created
on an AFFS partition, name will be prepended as the
volume name. Default = "" (empty string).
(See below.)
@@ -119,7 +136,7 @@ The Linux rwxrwxrwx file mode is handled as follows:
- All other flags (suid, sgid, ...) are ignored and will
not be retained.
-
+
Newly created files and directories will get the user and group ID
of the current user and a mode according to the umask.
@@ -148,11 +165,13 @@ might be "User", "WB" and "Graphics", the mount points /amiga/User,
Examples
========
-Command line:
+Command line::
+
mount Archive/Amiga/Workbench3.1.adf /mnt -t affs -o loop,verbose
mount /dev/sda3 /Amiga -t affs
-/etc/fstab entry:
+/etc/fstab entry::
+
/dev/sdb5 /amiga/Workbench affs noauto,user,exec,verbose 0 0
IMPORTANT NOTE
@@ -170,7 +189,8 @@ before booting Windows!
If the damage is already done, the following should fix the RDB
(where <disk> is the device name).
-DO AT YOUR OWN RISK:
+
+DO AT YOUR OWN RISK::
dd if=/dev/<disk> of=rdb.tmp count=1
cp rdb.tmp rdb.fixed
@@ -189,10 +209,14 @@ By default, filenames are truncated to 30 characters without warning.
'nofilenametruncate' mount option can change that behavior.
Case is ignored by the affs in filename matching, but Linux shells
-do care about the case. Example (with /wb being an affs mounted fs):
+do care about the case. Example (with /wb being an affs mounted fs)::
+
rm /wb/WRONGCASE
-will remove /mnt/wrongcase, but
+
+will remove /mnt/wrongcase, but::
+
rm /wb/WR*
+
will not since the names are matched by the shell.
The block allocation is designed for hard disk partitions. If more
@@ -219,4 +243,4 @@ due to an incompatibility with the Amiga floppy controller.
If you are interested in an Amiga Emulator for Linux, look at
-http://web.archive.org/web/*/http://www.freiburg.linux.de/~uae/
+http://web.archive.org/web/%2E/http://www.freiburg.linux.de/~uae/
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 14dc89c94822..273d802ad5fb 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -48,6 +48,7 @@ Documentation for filesystem implementations.
9p
adfs
+ affs
autofs
fuse
overlayfs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 03/44] docs: filesystems: convert affs.txt to ReST
2020-02-17 16:11 ` [PATCH 03/44] docs: filesystems: convert affs.txt " Mauro Carvalho Chehab
@ 2020-02-18 13:04 ` David Sterba
0 siblings, 0 replies; 112+ messages in thread
From: David Sterba @ 2020-02-18 13:04 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, David Sterba
On Mon, Feb 17, 2020 at 05:11:49PM +0100, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Add table markups;
> - Mark literal blocks as such;
> - Some whitespace fixes and new line breaks;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 04/44] docs: filesystems: convert afs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (7 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
David Howells, linux-afs
- Add a SPDX header;
- Adjust document and section titles;
- Comment out text-only ToC;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{afs.txt => afs.rst} | 73 +++++++++----------
Documentation/filesystems/index.rst | 1 +
2 files changed, 34 insertions(+), 40 deletions(-)
rename Documentation/filesystems/{afs.txt => afs.rst} (90%)
diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.rst
similarity index 90%
rename from Documentation/filesystems/afs.txt
rename to Documentation/filesystems/afs.rst
index 8c6ea7b41048..c4ec39a5966e 100644
--- a/Documentation/filesystems/afs.txt
+++ b/Documentation/filesystems/afs.rst
@@ -1,8 +1,10 @@
- ====================
- kAFS: AFS FILESYSTEM
- ====================
+.. SPDX-License-Identifier: GPL-2.0
-Contents:
+====================
+kAFS: AFS FILESYSTEM
+====================
+
+.. Contents:
- Overview.
- Usage.
@@ -14,8 +16,7 @@ Contents:
- The @sys substitution.
-========
-OVERVIEW
+Overview
========
This filesystem provides a fairly simple secure AFS filesystem driver. It is
@@ -35,35 +36,33 @@ It does not yet support the following AFS features:
(*) pioctl() system call.
-===========
-COMPILATION
+Compilation
===========
The filesystem should be enabled by turning on the kernel configuration
-options:
+options::
CONFIG_AF_RXRPC - The RxRPC protocol transport
CONFIG_RXKAD - The RxRPC Kerberos security handler
CONFIG_AFS - The AFS filesystem
-Additionally, the following can be turned on to aid debugging:
+Additionally, the following can be turned on to aid debugging::
CONFIG_AF_RXRPC_DEBUG - Permit AF_RXRPC debugging to be enabled
CONFIG_AFS_DEBUG - Permit AFS debugging to be enabled
They permit the debugging messages to be turned on dynamically by manipulating
-the masks in the following files:
+the masks in the following files::
/sys/module/af_rxrpc/parameters/debug
/sys/module/kafs/parameters/debug
-=====
-USAGE
+Usage
=====
When inserting the driver modules the root cell must be specified along with a
-list of volume location server IP addresses:
+list of volume location server IP addresses::
modprobe rxrpc
modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
@@ -77,14 +76,14 @@ The second module is the kerberos RxRPC security driver, and the third module
is the actual filesystem driver for the AFS filesystem.
Once the module has been loaded, more modules can be added by the following
-procedure:
+procedure::
echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
Where the parameters to the "add" command are the name of a cell and a list of
volume location servers within that cell, with the latter separated by colons.
-Filesystems can be mounted anywhere by commands similar to the following:
+Filesystems can be mounted anywhere by commands similar to the following::
mount -t afs "%cambridge.redhat.com:root.afs." /afs
mount -t afs "#cambridge.redhat.com:root.cell." /afs/cambridge
@@ -104,8 +103,7 @@ named volume will be looked up in the cell specified during modprobe.
Additional cells can be added through /proc (see later section).
-===========
-MOUNTPOINTS
+Mountpoints
===========
AFS has a concept of mountpoints. In AFS terms, these are specially formatted
@@ -123,42 +121,40 @@ culled first. If all are culled, then the requested volume will also be
unmounted, otherwise error EBUSY will be returned.
This can be used by the administrator to attempt to unmount the whole AFS tree
-mounted on /afs in one go by doing:
+mounted on /afs in one go by doing::
umount /afs
-============
-DYNAMIC ROOT
+Dynamic Root
============
A mount option is available to create a serverless mount that is only usable
-for dynamic lookup. Creating such a mount can be done by, for example:
+for dynamic lookup. Creating such a mount can be done by, for example::
mount -t afs none /afs -o dyn
This creates a mount that just has an empty directory at the root. Attempting
to look up a name in this directory will cause a mountpoint to be created that
-looks up a cell of the same name, for example:
+looks up a cell of the same name, for example::
ls /afs/grand.central.org/
-===============
-PROC FILESYSTEM
+Proc Filesystem
===============
The AFS modules creates a "/proc/fs/afs/" directory and populates it:
(*) A "cells" file that lists cells currently known to the afs module and
- their usage counts:
+ their usage counts::
[root@andromeda ~]# cat /proc/fs/afs/cells
USE NAME
3 cambridge.redhat.com
(*) A directory per cell that contains files that list volume location
- servers, volumes, and active servers known within that cell.
+ servers, volumes, and active servers known within that cell::
[root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/servers
USE ADDR STATE
@@ -171,8 +167,7 @@ The AFS modules creates a "/proc/fs/afs/" directory and populates it:
1 Val 20000000 20000001 20000002 root.afs
-=================
-THE CELL DATABASE
+The Cell Database
=================
The filesystem maintains an internal database of all the cells it knows and the
@@ -181,7 +176,7 @@ the system belongs is added to the database when modprobe is performed by the
"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
the kernel command line.
-Further cells can be added by commands similar to the following:
+Further cells can be added by commands similar to the following::
echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells
echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
@@ -189,8 +184,7 @@ Further cells can be added by commands similar to the following:
No other cell database operations are available at this time.
-========
-SECURITY
+Security
========
Secure operations are initiated by acquiring a key using the klog program. A
@@ -198,17 +192,17 @@ very primitive klog program is available at:
http://people.redhat.com/~dhowells/rxrpc/klog.c
-This should be compiled by:
+This should be compiled by::
make klog LDLIBS="-lcrypto -lcrypt -lkrb4 -lkeyutils"
-And then run as:
+And then run as::
./klog
Assuming it's successful, this adds a key of type RxRPC, named for the service
and cell, eg: "afs@<cellname>". This can be viewed with the keyctl program or
-by cat'ing /proc/keys:
+by cat'ing /proc/keys::
[root@andromeda ~]# keyctl show
Session Keyring
@@ -232,20 +226,19 @@ socket), then the operations on the file will be made with key that was used to
open the file.
-=====================
-THE @SYS SUBSTITUTION
+The @sys Substitution
=====================
The list of up to 16 @sys substitutions for the current network namespace can
-be configured by writing a list to /proc/fs/afs/sysname:
+be configured by writing a list to /proc/fs/afs/sysname::
[root@andromeda ~]# echo foo amd64_linux_26 >/proc/fs/afs/sysname
-or cleared entirely by writing an empty list:
+or cleared entirely by writing an empty list::
[root@andromeda ~]# echo >/proc/fs/afs/sysname
-The current list for current network namespace can be retrieved by:
+The current list for current network namespace can be retrieved by::
[root@andromeda ~]# cat /proc/fs/afs/sysname
foo
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 273d802ad5fb..0598bc52abdc 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -49,6 +49,7 @@ Documentation for filesystem implementations.
9p
adfs
affs
+ afs
autofs
fuse
overlayfs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 05/44] docs: filesystems: convert autofs-mount-control.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (8 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
...t-control.txt => autofs-mount-control.rst} | 102 +++++++++---------
Documentation/filesystems/index.rst | 1 +
2 files changed, 53 insertions(+), 50 deletions(-)
rename Documentation/filesystems/{autofs-mount-control.txt => autofs-mount-control.rst} (89%)
diff --git a/Documentation/filesystems/autofs-mount-control.txt b/Documentation/filesystems/autofs-mount-control.rst
similarity index 89%
rename from Documentation/filesystems/autofs-mount-control.txt
rename to Documentation/filesystems/autofs-mount-control.rst
index acc02fc57993..2903aed92316 100644
--- a/Documentation/filesystems/autofs-mount-control.txt
+++ b/Documentation/filesystems/autofs-mount-control.rst
@@ -1,4 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+====================================================================
Miscellaneous Device control operations for the autofs kernel module
====================================================================
@@ -36,24 +38,24 @@ For example, there are two types of automount maps, direct (in the kernel
module source you will see a third type called an offset, which is just
a direct mount in disguise) and indirect.
-Here is a master map with direct and indirect map entries:
+Here is a master map with direct and indirect map entries::
-/- /etc/auto.direct
-/test /etc/auto.indirect
+ /- /etc/auto.direct
+ /test /etc/auto.indirect
-and the corresponding map files:
+and the corresponding map files::
-/etc/auto.direct:
+ /etc/auto.direct:
-/automount/dparse/g6 budgie:/autofs/export1
-/automount/dparse/g1 shark:/autofs/export1
-and so on.
+ /automount/dparse/g6 budgie:/autofs/export1
+ /automount/dparse/g1 shark:/autofs/export1
+ and so on.
-/etc/auto.indirect:
+/etc/auto.indirect::
-g1 shark:/autofs/export1
-g6 budgie:/autofs/export1
-and so on.
+ g1 shark:/autofs/export1
+ g6 budgie:/autofs/export1
+ and so on.
For the above indirect map an autofs file system is mounted on /test and
mounts are triggered for each sub-directory key by the inode lookup
@@ -69,23 +71,23 @@ use the follow_link inode operation to trigger the mount.
But, each entry in direct and indirect maps can have offsets (making
them multi-mount map entries).
-For example, an indirect mount map entry could also be:
+For example, an indirect mount map entry could also be::
-g1 \
- / shark:/autofs/export5/testing/test \
- /s1 shark:/autofs/export/testing/test/s1 \
- /s2 shark:/autofs/export5/testing/test/s2 \
- /s1/ss1 shark:/autofs/export1 \
- /s2/ss2 shark:/autofs/export2
+ g1 \
+ / shark:/autofs/export5/testing/test \
+ /s1 shark:/autofs/export/testing/test/s1 \
+ /s2 shark:/autofs/export5/testing/test/s2 \
+ /s1/ss1 shark:/autofs/export1 \
+ /s2/ss2 shark:/autofs/export2
-and a similarly a direct mount map entry could also be:
+and a similarly a direct mount map entry could also be::
-/automount/dparse/g1 \
- / shark:/autofs/export5/testing/test \
- /s1 shark:/autofs/export/testing/test/s1 \
- /s2 shark:/autofs/export5/testing/test/s2 \
- /s1/ss1 shark:/autofs/export2 \
- /s2/ss2 shark:/autofs/export2
+ /automount/dparse/g1 \
+ / shark:/autofs/export5/testing/test \
+ /s1 shark:/autofs/export/testing/test/s1 \
+ /s2 shark:/autofs/export5/testing/test/s2 \
+ /s1/ss1 shark:/autofs/export2 \
+ /s2/ss2 shark:/autofs/export2
One of the issues with version 4 of autofs was that, when mounting an
entry with a large number of offsets, possibly with nesting, we needed
@@ -170,32 +172,32 @@ autofs Miscellaneous Device mount control interface
The control interface is opening a device node, typically /dev/autofs.
All the ioctls use a common structure to pass the needed parameter
-information and return operation results:
+information and return operation results::
-struct autofs_dev_ioctl {
- __u32 ver_major;
- __u32 ver_minor;
- __u32 size; /* total size of data passed in
- * including this struct */
- __s32 ioctlfd; /* automount command fd */
+ struct autofs_dev_ioctl {
+ __u32 ver_major;
+ __u32 ver_minor;
+ __u32 size; /* total size of data passed in
+ * including this struct */
+ __s32 ioctlfd; /* automount command fd */
- /* Command parameters */
- union {
- struct args_protover protover;
- struct args_protosubver protosubver;
- struct args_openmount openmount;
- struct args_ready ready;
- struct args_fail fail;
- struct args_setpipefd setpipefd;
- struct args_timeout timeout;
- struct args_requester requester;
- struct args_expire expire;
- struct args_askumount askumount;
- struct args_ismountpoint ismountpoint;
- };
+ /* Command parameters */
+ union {
+ struct args_protover protover;
+ struct args_protosubver protosubver;
+ struct args_openmount openmount;
+ struct args_ready ready;
+ struct args_fail fail;
+ struct args_setpipefd setpipefd;
+ struct args_timeout timeout;
+ struct args_requester requester;
+ struct args_expire expire;
+ struct args_askumount askumount;
+ struct args_ismountpoint ismountpoint;
+ };
- char path[0];
-};
+ char path[0];
+ };
The ioctlfd field is a mount point file descriptor of an autofs mount
point. It is returned by the open call and is used by all calls except
@@ -212,7 +214,7 @@ is used account for the increased structure length when translating the
structure sent from user space.
This structure can be initialized before setting specific fields by using
-the void function call init_autofs_dev_ioctl(struct autofs_dev_ioctl *).
+the void function call init_autofs_dev_ioctl(``struct autofs_dev_ioctl *``).
All of the ioctls perform a copy of this structure from user space to
kernel space and return -EINVAL if the size parameter is smaller than
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 0598bc52abdc..c9480138d47e 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -51,6 +51,7 @@ Documentation for filesystem implementations.
affs
afs
autofs
+ autofs-mount-control
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 06/44] docs: filesystems: convert befs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (9 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Luis de Bethencourt, Salah Triki
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{befs.txt => befs.rst} | 59 +++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 36 insertions(+), 24 deletions(-)
rename Documentation/filesystems/{befs.txt => befs.rst} (83%)
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.rst
similarity index 83%
rename from Documentation/filesystems/befs.txt
rename to Documentation/filesystems/befs.rst
index da45e6c842b8..79f9740d76ff 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.rst
@@ -1,48 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
BeOS filesystem for Linux
+=========================
Document last updated: Dec 6, 2001
-WARNING
+Warning
=======
Make sure you understand that this is alpha software. This means that the
-implementation is neither complete nor well-tested.
+implementation is neither complete nor well-tested.
I DISCLAIM ALL RESPONSIBILITY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE!
-LICENSE
-=====
-This software is covered by the GNU General Public License.
+License
+=======
+This software is covered by the GNU General Public License.
See the file COPYING for the complete text of the license.
Or the GNU website: <http://www.gnu.org/licenses/licenses.html>
-AUTHOR
-=====
+Author
+======
The largest part of the code written by Will Dyson <will_dyson@pobox.com>
He has been working on the code since Aug 13, 2001. See the changelog for
details.
Original Author: Makoto Kato <m_kato@ga2.so-net.ne.jp>
+
His original code can still be found at:
<http://hp.vector.co.jp/authors/VA008030/bfs/>
+
Does anyone know of a more current email address for Makoto? He doesn't
respond to the address given above...
This filesystem doesn't have a maintainer.
-WHAT IS THIS DRIVER?
-==================
-This module implements the native filesystem of BeOS http://www.beincorporated.com/
+What is this Driver?
+====================
+This module implements the native filesystem of BeOS http://www.beincorporated.com/
for the linux 2.4.1 and later kernels. Currently it is a read-only
implementation.
Which is it, BFS or BEFS?
-================
-Be, Inc said, "BeOS Filesystem is officially called BFS, not BeFS".
+=========================
+Be, Inc said, "BeOS Filesystem is officially called BFS, not BeFS".
But Unixware Boot Filesystem is called bfs, too. And they are already in
the kernel. Because of this naming conflict, on Linux the BeOS
filesystem is called befs.
-HOW TO INSTALL
+How to Install
==============
step 1. Install the BeFS patch into the source code tree of linux.
@@ -54,16 +60,16 @@ is called patch-befs-xxx, you would do the following:
patch -p1 < /path/to/patch-befs-xxx
if the patching step fails (i.e. there are rejected hunks), you can try to
-figure it out yourself (it shouldn't be hard), or mail the maintainer
+figure it out yourself (it shouldn't be hard), or mail the maintainer
(Will Dyson <will_dyson@pobox.com>) for help.
step 2. Configuration & make kernel
The linux kernel has many compile-time options. Most of them are beyond the
scope of this document. I suggest the Kernel-HOWTO document as a good general
-reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html
+reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html
-However, to use the BeFS module, you must enable it at configure time.
+However, to use the BeFS module, you must enable it at configure time::
cd /foo/bar/linux
make menuconfig (or xconfig)
@@ -82,35 +88,40 @@ step 3. Install
See the kernel howto <http://www.linux.com/howto/Kernel-HOWTO.html> for
instructions on this critical step.
-USING BFS
+Using BFS
=========
To use the BeOS filesystem, use filesystem type 'befs'.
-ex)
+ex::
+
mount -t befs /dev/fd0 /beos
-MOUNT OPTIONS
+Mount Options
=============
+
+============= ===========================================================
uid=nnn All files in the partition will be owned by user id nnn.
gid=nnn All files in the partition will be in group nnn.
iocharset=xxx Use xxx as the name of the NLS translation table.
debug The driver will output debugging information to the syslog.
+============= ===========================================================
-HOW TO GET LASTEST VERSION
+How to Get Lastest Version
==========================
The latest version is currently available at:
<http://befs-driver.sourceforge.net/>
-ANY KNOWN BUGS?
-===========
+Any Known Bugs?
+===============
As of Jan 20, 2002:
-
+
None
-SPECIAL THANKS
+Special Thanks
==============
Dominic Giampalo ... Writing "Practical file system design with Be filesystem"
+
Hiroyuki Yamada ... Testing LinuxPPC.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index c9480138d47e..98de437f5500 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -52,6 +52,7 @@ Documentation for filesystem implementations.
afs
autofs
autofs-mount-control
+ befs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 07/44] docs: filesystems: convert bfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (10 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Tigran A. Aivazian
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{bfs.txt => bfs.rst} | 37 ++++++++++---------
Documentation/filesystems/index.rst | 1 +
2 files changed, 21 insertions(+), 17 deletions(-)
rename Documentation/filesystems/{bfs.txt => bfs.rst} (71%)
diff --git a/Documentation/filesystems/bfs.txt b/Documentation/filesystems/bfs.rst
similarity index 71%
rename from Documentation/filesystems/bfs.txt
rename to Documentation/filesystems/bfs.rst
index 843ce91a2e40..ce14b9018807 100644
--- a/Documentation/filesystems/bfs.txt
+++ b/Documentation/filesystems/bfs.rst
@@ -1,4 +1,7 @@
-BFS FILESYSTEM FOR LINUX
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+BFS Filesystem for Linux
========================
The BFS filesystem is used by SCO UnixWare OS for the /stand slice, which
@@ -9,22 +12,22 @@ In order to access /stand partition under Linux you obviously need to
know the partition number and the kernel must support UnixWare disk slices
(CONFIG_UNIXWARE_DISKLABEL config option). However BFS support does not
depend on having UnixWare disklabel support because one can also mount
-BFS filesystem via loopback:
+BFS filesystem via loopback::
-# losetup /dev/loop0 stand.img
-# mount -t bfs /dev/loop0 /mnt/stand
+ # losetup /dev/loop0 stand.img
+ # mount -t bfs /dev/loop0 /mnt/stand
-where stand.img is a file containing the image of BFS filesystem.
+where stand.img is a file containing the image of BFS filesystem.
When you have finished using it and umounted you need to also deallocate
-/dev/loop0 device by:
+/dev/loop0 device by::
-# losetup -d /dev/loop0
+ # losetup -d /dev/loop0
-You can simplify mounting by just typing:
+You can simplify mounting by just typing::
-# mount -t bfs -o loop stand.img /mnt/stand
+ # mount -t bfs -o loop stand.img /mnt/stand
-this will allocate the first available loopback device (and load loop.o
+this will allocate the first available loopback device (and load loop.o
kernel module if necessary) automatically. If the loopback driver is not
loaded automatically, make sure that you have compiled the module and
that modprobe is functioning. Beware that umount will not deallocate
@@ -33,21 +36,21 @@ that modprobe is functioning. Beware that umount will not deallocate
losetup(8). Read losetup(8) manpage for more info.
To create the BFS image under UnixWare you need to find out first which
-slice contains it. The command prtvtoc(1M) is your friend:
+slice contains it. The command prtvtoc(1M) is your friend::
-# prtvtoc /dev/rdsk/c0b0t0d0s0
+ # prtvtoc /dev/rdsk/c0b0t0d0s0
(assuming your root disk is on target=0, lun=0, bus=0, controller=0). Then you
look for the slice with tag "STAND", which is usually slice 10. With this
-information you can use dd(1) to create the BFS image:
+information you can use dd(1) to create the BFS image::
-# umount /stand
-# dd if=/dev/rdsk/c0b0t0d0sa of=stand.img bs=512
+ # umount /stand
+ # dd if=/dev/rdsk/c0b0t0d0sa of=stand.img bs=512
Just in case, you can verify that you have done the right thing by checking
-the magic number:
+the magic number::
-# od -Ad -tx4 stand.img | more
+ # od -Ad -tx4 stand.img | more
The first 4 bytes should be 0x1badface.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 98de437f5500..f74e6b273d9f 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -53,6 +53,7 @@ Documentation for filesystem implementations.
autofs
autofs-mount-control
befs
+ bfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 08/44] docs: filesystems: convert btrfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (11 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
2020-02-17 18:50 ` David Sterba
2020-02-18 11:44 ` David Sterba
-1 siblings, 2 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Chris Mason, Josef Bacik, David Sterba, linux-btrfs
Just trivial changes:
- Add a SPDX header;
- Add it to filesystems/index.rst.
While here, adjust document title, just to make it use the same
style of the other docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/{btrfs.txt => btrfs.rst} | 3 +++
Documentation/filesystems/index.rst | 1 +
2 files changed, 4 insertions(+)
rename Documentation/filesystems/{btrfs.txt => btrfs.rst} (96%)
diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.rst
similarity index 96%
rename from Documentation/filesystems/btrfs.txt
rename to Documentation/filesystems/btrfs.rst
index f9dad22d95ce..d0904f602819 100644
--- a/Documentation/filesystems/btrfs.txt
+++ b/Documentation/filesystems/btrfs.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
BTRFS
=====
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f74e6b273d9f..dae862cf167e 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -54,6 +54,7 @@ Documentation for filesystem implementations.
autofs-mount-control
befs
bfs
+ btrfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 08/44] docs: filesystems: convert btrfs.txt to ReST
2020-02-17 16:11 ` [PATCH 08/44] docs: filesystems: convert btrfs.txt " Mauro Carvalho Chehab
@ 2020-02-17 18:50 ` David Sterba
2020-02-17 19:34 ` Jonathan Corbet
2020-02-18 11:44 ` David Sterba
1 sibling, 1 reply; 112+ messages in thread
From: David Sterba @ 2020-02-17 18:50 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Chris Mason, Josef Bacik, David Sterba, linux-btrfs
On Mon, Feb 17, 2020 at 05:11:54PM +0100, Mauro Carvalho Chehab wrote:
> Just trivial changes:
>
> - Add a SPDX header;
> - Add it to filesystems/index.rst.
>
> While here, adjust document title, just to make it use the same
> style of the other docs.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thanks. I can take the patch through btrfs tree, unless Jon wants all
doc patches go through his tree.
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 08/44] docs: filesystems: convert btrfs.txt to ReST
2020-02-17 18:50 ` David Sterba
@ 2020-02-17 19:34 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-17 19:34 UTC (permalink / raw)
To: David Sterba
Cc: Mauro Carvalho Chehab, Linux Doc Mailing List, linux-fsdevel,
Chris Mason, Josef Bacik, David Sterba, linux-btrfs
On Mon, 17 Feb 2020 19:50:12 +0100
David Sterba <dsterba@suse.cz> wrote:
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>
> Thanks. I can take the patch through btrfs tree, unless Jon wants all
> doc patches go through his tree.
>
I'm generally happy either way. With this particular set, though,
splitting them across trees seems likely to create a lot of merge
conflicts on the index.rst file, so it might be better to keep them all
together.
Thanks,
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 08/44] docs: filesystems: convert btrfs.txt to ReST
2020-02-17 16:11 ` [PATCH 08/44] docs: filesystems: convert btrfs.txt " Mauro Carvalho Chehab
2020-02-17 18:50 ` David Sterba
@ 2020-02-18 11:44 ` David Sterba
1 sibling, 0 replies; 112+ messages in thread
From: David Sterba @ 2020-02-18 11:44 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Chris Mason, Josef Bacik, David Sterba, linux-btrfs
On Mon, Feb 17, 2020 at 05:11:54PM +0100, Mauro Carvalho Chehab wrote:
> Just trivial changes:
>
> - Add a SPDX header;
> - Add it to filesystems/index.rst.
>
> While here, adjust document title, just to make it use the same
> style of the other docs.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
As discussed, please merge it with the rest of the series.
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 09/44] docs: filesystems: convert ceph.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (12 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
2020-02-18 11:57 ` Jeff Layton
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Jeff Layton, Sage Weil, Ilya Dryomov, ceph-devel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{ceph.txt => ceph.rst} | 26 +++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 16 insertions(+), 11 deletions(-)
rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.rst
similarity index 91%
rename from Documentation/filesystems/ceph.txt
rename to Documentation/filesystems/ceph.rst
index b19b6a03f91c..b46a7218248f 100644
--- a/Documentation/filesystems/ceph.txt
+++ b/Documentation/filesystems/ceph.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
Ceph Distributed File System
============================
@@ -15,6 +18,7 @@ Basic features include:
* Easy deployment: most FS components are userspace daemons
Also,
+
* Flexible snapshots (on any directory)
* Recursive accounting (nested files, directories, bytes)
@@ -63,7 +67,7 @@ no 'du' or similar recursive scan of the file system is required.
Finally, Ceph also allows quotas to be set on any directory in the system.
The quota can restrict the number of bytes or the number of files stored
beneath that point in the directory hierarchy. Quotas can be set using
-extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', eg:
+extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', eg::
setfattr -n ceph.quota.max_bytes -v 100000000 /some/dir
getfattr -n ceph.quota.max_bytes /some/dir
@@ -76,7 +80,7 @@ from writing as much data as it needs.
Mount Syntax
============
-The basic mount syntax is:
+The basic mount syntax is::
# mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt
@@ -84,7 +88,7 @@ You only need to specify a single monitor, as the client will get the
full list when it connects. (However, if the monitor you specify
happens to be down, the mount won't succeed.) The port can be left
off if the monitor is using the default. So if the monitor is at
-1.2.3.4,
+1.2.3.4::
# mount -t ceph 1.2.3.4:/ /mnt/ceph
@@ -163,14 +167,14 @@ Mount Options
available modes are "no" and "clean". The default is "no".
* no: never attempt to reconnect when client detects that it has been
- blacklisted. Operations will generally fail after being blacklisted.
+ blacklisted. Operations will generally fail after being blacklisted.
* clean: client reconnects to the ceph cluster automatically when it
- detects that it has been blacklisted. During reconnect, client drops
- dirty data/metadata, invalidates page caches and writable file handles.
- After reconnect, file locks become stale because the MDS loses track
- of them. If an inode contains any stale file locks, read/write on the
- inode is not allowed until applications release all stale file locks.
+ detects that it has been blacklisted. During reconnect, client drops
+ dirty data/metadata, invalidates page caches and writable file handles.
+ After reconnect, file locks become stale because the MDS loses track
+ of them. If an inode contains any stale file locks, read/write on the
+ inode is not allowed until applications release all stale file locks.
More Information
================
@@ -179,8 +183,8 @@ For more information on Ceph, see the home page at
https://ceph.com/
The Linux kernel client source tree is available at
- https://github.com/ceph/ceph-client.git
- git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+ - https://github.com/ceph/ceph-client.git
+ - git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
and the source for the full system is at
https://github.com/ceph/ceph.git
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index dae862cf167e..ddd8f7b2bb25 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -55,6 +55,7 @@ Documentation for filesystem implementations.
befs
bfs
btrfs
+ ceph
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 09/44] docs: filesystems: convert ceph.txt to ReST
2020-02-17 16:11 ` [PATCH 09/44] docs: filesystems: convert ceph.txt " Mauro Carvalho Chehab
@ 2020-02-18 11:57 ` Jeff Layton
0 siblings, 0 replies; 112+ messages in thread
From: Jeff Layton @ 2020-02-18 11:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Sage Weil, Ilya Dryomov, ceph-devel
On Mon, 2020-02-17 at 17:11 +0100, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../filesystems/{ceph.txt => ceph.rst} | 26 +++++++++++--------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 16 insertions(+), 11 deletions(-)
> rename Documentation/filesystems/{ceph.txt => ceph.rst} (91%)
>
Looks fine to me. Mauro, should I merge this via the ceph tree, or are
you merging them in via some other tree? In any case:
Acked-by: Jeff Layton <jlayton@kernel.org>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 10/44] docs: filesystems: convert cramfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (13 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
2020-02-17 18:11 ` Nicolas Pitre
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Nicolas Pitre
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{cramfs.txt => cramfs.rst} | 19 ++++++++++++-------
Documentation/filesystems/index.rst | 1 +
2 files changed, 13 insertions(+), 7 deletions(-)
rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
diff --git a/Documentation/filesystems/cramfs.txt b/Documentation/filesystems/cramfs.rst
similarity index 88%
rename from Documentation/filesystems/cramfs.txt
rename to Documentation/filesystems/cramfs.rst
index 8e19a53d648b..afbdbde98bd2 100644
--- a/Documentation/filesystems/cramfs.txt
+++ b/Documentation/filesystems/cramfs.rst
@@ -1,12 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
- Cramfs - cram a filesystem onto a small ROM
+===========================================
+Cramfs - cram a filesystem onto a small ROM
+===========================================
-cramfs is designed to be simple and small, and to compress things well.
+cramfs is designed to be simple and small, and to compress things well.
It uses the zlib routines to compress a file one page at a time, and
allows random page access. The meta-data is not compressed, but is
expressed in a very terse representation to make it use much less
-diskspace than traditional filesystems.
+diskspace than traditional filesystems.
You can't write to a cramfs filesystem (making it compressible and
compact also makes it _very_ hard to update on-the-fly), so you have to
@@ -28,9 +31,9 @@ issue.
Hard links are supported, but hard linked files
will still have a link count of 1 in the cramfs image.
-Cramfs directories have no `.' or `..' entries. Directories (like
+Cramfs directories have no ``.`` or ``..`` entries. Directories (like
every other file on cramfs) always have a link count of 1. (There's
-no need to use -noleaf in `find', btw.)
+no need to use -noleaf in ``find``, btw.)
No timestamps are stored in a cramfs, so these default to the epoch
(1970 GMT). Recently-accessed files may have updated timestamps, but
@@ -70,9 +73,9 @@ MTD drivers are cfi_cmdset_0001 (Intel/Sharp CFI flash) or physmap
(Flash device in physical memory map). MTD partitions based on such devices
are fine too. Then that device should be specified with the "mtd:" prefix
as the mount device argument. For example, to mount the MTD device named
-"fs_partition" on the /mnt directory:
+"fs_partition" on the /mnt directory::
-$ mount -t cramfs mtd:fs_partition /mnt
+ $ mount -t cramfs mtd:fs_partition /mnt
To boot a kernel with this as root filesystem, suffice to specify
something like "root=mtd:fs_partition" on the kernel command line.
@@ -90,6 +93,7 @@ https://github.com/npitre/cramfs-tools
For /usr/share/magic
--------------------
+===== ======================= =======================
0 ulelong 0x28cd3d45 Linux cramfs offset 0
>4 ulelong x size %d
>8 ulelong x flags 0x%x
@@ -110,6 +114,7 @@ For /usr/share/magic
>552 ulelong x fsid.blocks %d
>556 ulelong x fsid.files %d
>560 string >\0 name "%.16s"
+===== ======================= =======================
Hacker Notes
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index ddd8f7b2bb25..8fe848ea04af 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -56,6 +56,7 @@ Documentation for filesystem implementations.
bfs
btrfs
ceph
+ cramfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 10/44] docs: filesystems: convert cramfs.txt to ReST
2020-02-17 16:11 ` [PATCH 10/44] docs: filesystems: convert cramfs.txt " Mauro Carvalho Chehab
@ 2020-02-17 18:11 ` Nicolas Pitre
0 siblings, 0 replies; 112+ messages in thread
From: Nicolas Pitre @ 2020-02-17 18:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel
On Mon, 17 Feb 2020, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
> ---
> .../filesystems/{cramfs.txt => cramfs.rst} | 19 ++++++++++++-------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 13 insertions(+), 7 deletions(-)
> rename Documentation/filesystems/{cramfs.txt => cramfs.rst} (88%)
>
> diff --git a/Documentation/filesystems/cramfs.txt b/Documentation/filesystems/cramfs.rst
> similarity index 88%
> rename from Documentation/filesystems/cramfs.txt
> rename to Documentation/filesystems/cramfs.rst
> index 8e19a53d648b..afbdbde98bd2 100644
> --- a/Documentation/filesystems/cramfs.txt
> +++ b/Documentation/filesystems/cramfs.rst
> @@ -1,12 +1,15 @@
> +.. SPDX-License-Identifier: GPL-2.0
>
> - Cramfs - cram a filesystem onto a small ROM
> +===========================================
> +Cramfs - cram a filesystem onto a small ROM
> +===========================================
>
> -cramfs is designed to be simple and small, and to compress things well.
> +cramfs is designed to be simple and small, and to compress things well.
>
> It uses the zlib routines to compress a file one page at a time, and
> allows random page access. The meta-data is not compressed, but is
> expressed in a very terse representation to make it use much less
> -diskspace than traditional filesystems.
> +diskspace than traditional filesystems.
>
> You can't write to a cramfs filesystem (making it compressible and
> compact also makes it _very_ hard to update on-the-fly), so you have to
> @@ -28,9 +31,9 @@ issue.
> Hard links are supported, but hard linked files
> will still have a link count of 1 in the cramfs image.
>
> -Cramfs directories have no `.' or `..' entries. Directories (like
> +Cramfs directories have no ``.`` or ``..`` entries. Directories (like
> every other file on cramfs) always have a link count of 1. (There's
> -no need to use -noleaf in `find', btw.)
> +no need to use -noleaf in ``find``, btw.)
>
> No timestamps are stored in a cramfs, so these default to the epoch
> (1970 GMT). Recently-accessed files may have updated timestamps, but
> @@ -70,9 +73,9 @@ MTD drivers are cfi_cmdset_0001 (Intel/Sharp CFI flash) or physmap
> (Flash device in physical memory map). MTD partitions based on such devices
> are fine too. Then that device should be specified with the "mtd:" prefix
> as the mount device argument. For example, to mount the MTD device named
> -"fs_partition" on the /mnt directory:
> +"fs_partition" on the /mnt directory::
>
> -$ mount -t cramfs mtd:fs_partition /mnt
> + $ mount -t cramfs mtd:fs_partition /mnt
>
> To boot a kernel with this as root filesystem, suffice to specify
> something like "root=mtd:fs_partition" on the kernel command line.
> @@ -90,6 +93,7 @@ https://github.com/npitre/cramfs-tools
> For /usr/share/magic
> --------------------
>
> +===== ======================= =======================
> 0 ulelong 0x28cd3d45 Linux cramfs offset 0
> >4 ulelong x size %d
> >8 ulelong x flags 0x%x
> @@ -110,6 +114,7 @@ For /usr/share/magic
> >552 ulelong x fsid.blocks %d
> >556 ulelong x fsid.files %d
> >560 string >\0 name "%.16s"
> +===== ======================= =======================
>
>
> Hacker Notes
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index ddd8f7b2bb25..8fe848ea04af 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -56,6 +56,7 @@ Documentation for filesystem implementations.
> bfs
> btrfs
> ceph
> + cramfs
> fuse
> overlayfs
> virtiofs
> --
> 2.24.1
>
>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 11/44] docs: filesystems: convert debugfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (14 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Use copyright symbol;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Use footnoote markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{debugfs.txt => debugfs.rst} | 54 ++++++++++---------
Documentation/filesystems/index.rst | 1 +
2 files changed, 31 insertions(+), 24 deletions(-)
rename Documentation/filesystems/{debugfs.txt => debugfs.rst} (91%)
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.rst
similarity index 91%
rename from Documentation/filesystems/debugfs.txt
rename to Documentation/filesystems/debugfs.rst
index 55336a47a110..80f332b8eb68 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.rst
@@ -1,4 +1,11 @@
-Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=======
+DebugFS
+=======
+
+Copyright |copy| 2009 Jonathan Corbet <corbet@lwn.net>
Debugfs exists as a simple way for kernel developers to make information
available to user space. Unlike /proc, which is only meant for information
@@ -6,11 +13,11 @@ about a process, or sysfs, which has strict one-value-per-file rules,
debugfs has no rules at all. Developers can put any information they want
there. The debugfs filesystem is also intended to not serve as a stable
ABI to user space; in theory, there are no stability constraints placed on
-files exported there. The real world is not always so simple, though [1];
+files exported there. The real world is not always so simple, though [1]_;
even debugfs interfaces are best designed with the idea that they will need
to be maintained forever.
-Debugfs is typically mounted with a command like:
+Debugfs is typically mounted with a command like::
mount -t debugfs none /sys/kernel/debug
@@ -23,7 +30,7 @@ Note that the debugfs API is exported GPL-only to modules.
Code using debugfs should include <linux/debugfs.h>. Then, the first order
of business will be to create at least one directory to hold a set of
-debugfs files:
+debugfs files::
struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
@@ -36,7 +43,7 @@ something went wrong. If ERR_PTR(-ENODEV) is returned, that is an
indication that the kernel has been built without debugfs support and none
of the functions described below will work.
-The most general way to create a file within a debugfs directory is with:
+The most general way to create a file within a debugfs directory is with::
struct dentry *debugfs_create_file(const char *name, umode_t mode,
struct dentry *parent, void *data,
@@ -53,7 +60,7 @@ ERR_PTR(-ERROR) on error, or ERR_PTR(-ENODEV) if debugfs support is
missing.
Create a file with an initial size, the following function can be used
-instead:
+instead::
struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
struct dentry *parent, void *data,
@@ -66,7 +73,7 @@ as the function debugfs_create_file.
In a number of cases, the creation of a set of file operations is not
actually necessary; the debugfs code provides a number of helper functions
for simple situations. Files containing a single integer value can be
-created with any of:
+created with any of::
void debugfs_create_u8(const char *name, umode_t mode,
struct dentry *parent, u8 *value);
@@ -80,7 +87,7 @@ created with any of:
These files support both reading and writing the given value; if a specific
file should not be written to, simply set the mode bits accordingly. The
values in these files are in decimal; if hexadecimal is more appropriate,
-the following functions can be used instead:
+the following functions can be used instead::
void debugfs_create_x8(const char *name, umode_t mode,
struct dentry *parent, u8 *value);
@@ -94,7 +101,7 @@ the following functions can be used instead:
These functions are useful as long as the developer knows the size of the
value to be exported. Some types can have different widths on different
architectures, though, complicating the situation somewhat. There are
-functions meant to help out in such special cases:
+functions meant to help out in such special cases::
void debugfs_create_size_t(const char *name, umode_t mode,
struct dentry *parent, size_t *value);
@@ -103,7 +110,7 @@ As might be expected, this function will create a debugfs file to represent
a variable of type size_t.
Similarly, there are helpers for variables of type unsigned long, in decimal
-and hexadecimal:
+and hexadecimal::
struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
struct dentry *parent,
@@ -111,7 +118,7 @@ and hexadecimal:
void debugfs_create_xul(const char *name, umode_t mode,
struct dentry *parent, unsigned long *value);
-Boolean values can be placed in debugfs with:
+Boolean values can be placed in debugfs with::
struct dentry *debugfs_create_bool(const char *name, umode_t mode,
struct dentry *parent, bool *value);
@@ -120,7 +127,7 @@ A read on the resulting file will yield either Y (for non-zero values) or
N, followed by a newline. If written to, it will accept either upper- or
lower-case values, or 1 or 0. Any other input will be silently ignored.
-Also, atomic_t values can be placed in debugfs with:
+Also, atomic_t values can be placed in debugfs with::
void debugfs_create_atomic_t(const char *name, umode_t mode,
struct dentry *parent, atomic_t *value)
@@ -129,7 +136,7 @@ A read of this file will get atomic_t values, and a write of this file
will set atomic_t values.
Another option is exporting a block of arbitrary binary data, with
-this structure and function:
+this structure and function::
struct debugfs_blob_wrapper {
void *data;
@@ -151,7 +158,7 @@ If you want to dump a block of registers (something that happens quite
often during development, even if little such code reaches mainline.
Debugfs offers two functions: one to make a registers-only file, and
another to insert a register block in the middle of another sequential
-file.
+file::
struct debugfs_reg32 {
char *name;
@@ -175,7 +182,7 @@ The "base" argument may be 0, but you may want to build the reg32 array
using __stringify, and a number of register names (macros) are actually
byte offsets over a base for the register block.
-If you want to dump an u32 array in debugfs, you can create file with:
+If you want to dump an u32 array in debugfs, you can create file with::
void debugfs_create_u32_array(const char *name, umode_t mode,
struct dentry *parent,
@@ -185,7 +192,7 @@ The "array" argument provides data, and the "elements" argument is
the number of elements in the array. Note: Once array is created its
size can not be changed.
-There is a helper function to create device related seq_file:
+There is a helper function to create device related seq_file::
struct dentry *debugfs_create_devm_seqfile(struct device *dev,
const char *name,
@@ -197,14 +204,14 @@ The "dev" argument is the device related to this debugfs file, and
the "read_fn" is a function pointer which to be called to print the
seq_file content.
-There are a couple of other directory-oriented helper functions:
+There are a couple of other directory-oriented helper functions::
- struct dentry *debugfs_rename(struct dentry *old_dir,
+ struct dentry *debugfs_rename(struct dentry *old_dir,
struct dentry *old_dentry,
- struct dentry *new_dir,
+ struct dentry *new_dir,
const char *new_name);
- struct dentry *debugfs_create_symlink(const char *name,
+ struct dentry *debugfs_create_symlink(const char *name,
struct dentry *parent,
const char *target);
@@ -219,7 +226,7 @@ module is unloaded without explicitly removing debugfs entries, the result
will be a lot of stale pointers and no end of highly antisocial behavior.
So all debugfs users - at least those which can be built as modules - must
be prepared to remove all files and directories they create there. A file
-can be removed with:
+can be removed with::
void debugfs_remove(struct dentry *dentry);
@@ -229,7 +236,7 @@ be removed.
Once upon a time, debugfs users were required to remember the dentry
pointer for every debugfs file they created so that all files could be
cleaned up. We live in more civilized times now, though, and debugfs users
-can call:
+can call::
void debugfs_remove_recursive(struct dentry *dentry);
@@ -237,5 +244,4 @@ If this function is passed a pointer for the dentry corresponding to the
top-level directory, the entire hierarchy below that directory will be
removed.
-Notes:
- [1] http://lwn.net/Articles/309298/
+.. [1] http://lwn.net/Articles/309298/
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 8fe848ea04af..ab3b656bbe60 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -57,6 +57,7 @@ Documentation for filesystem implementations.
btrfs
ceph
cramfs
+ debugfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, Joseph Qi, ocfs2-devel
- Add a SPDX header;
- Use copyright symbol;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +++++++++++++------
Documentation/filesystems/index.rst | 1 +
2 files changed, 20 insertions(+), 9 deletions(-)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.rst
similarity index 86%
rename from Documentation/filesystems/dlmfs.txt
rename to Documentation/filesystems/dlmfs.rst
index fcf4d509d118..68daaa7facf9 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.rst
@@ -1,20 +1,25 @@
-dlmfs
-==================
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=====
+DLMFS
+=====
+
A minimal DLM userspace interface implemented via a virtual file
system.
dlmfs is built with OCFS2 as it requires most of its infrastructure.
-Project web page: http://ocfs2.wiki.kernel.org
-Tools web page: https://github.com/markfasheh/ocfs2-tools
-OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+:Project web page: http://ocfs2.wiki.kernel.org
+:Tools web page: https://github.com/markfasheh/ocfs2-tools
+:OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
-CREDITS
+Credits
=======
-Some code taken from ramfs which is Copyright (C) 2000 Linus Torvalds
+Some code taken from ramfs which is Copyright |copy| 2000 Linus Torvalds
and Transmeta Corp.
Mark Fasheh <mark.fasheh@oracle.com>
@@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
not automatically create inodes for existing lock resources.
+============ ===========================
Open Flag Lock Request Type
---------- -----------------
+============ ===========================
O_RDONLY Shared Read
O_RDWR Exclusive
+============ ===========================
+
+============ ===========================
Open Flag Resulting Locking Behavior
---------- --------------------------
+============ ===========================
O_NONBLOCK Trylock operation
+============ ===========================
You must provide exactly one of O_RDONLY or O_RDWR.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index ab3b656bbe60..c6885c7ef781 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -58,6 +58,7 @@ Documentation for filesystem implementations.
ceph
cramfs
debugfs
+ dlmfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: ocfs2-devel
- Add a SPDX header;
- Use copyright symbol;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +++++++++++++------
Documentation/filesystems/index.rst | 1 +
2 files changed, 20 insertions(+), 9 deletions(-)
rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.rst
similarity index 86%
rename from Documentation/filesystems/dlmfs.txt
rename to Documentation/filesystems/dlmfs.rst
index fcf4d509d118..68daaa7facf9 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.rst
@@ -1,20 +1,25 @@
-dlmfs
-==================
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=====
+DLMFS
+=====
+
A minimal DLM userspace interface implemented via a virtual file
system.
dlmfs is built with OCFS2 as it requires most of its infrastructure.
-Project web page: https://urldefense.com/v3/__http://ocfs2.wiki.kernel.org__;!!GqivPVa7Brio!M_za4-BJ-jyxvI9HpZr8m7YdCXlC2WssU4cPzlq8hlT8wrpBR8uenuTtz3lgLjxHzejs1A$
-Tools web page: https://urldefense.com/v3/__https://github.com/markfasheh/ocfs2-tools__;!!GqivPVa7Brio!M_za4-BJ-jyxvI9HpZr8m7YdCXlC2WssU4cPzlq8hlT8wrpBR8uenuTtz3lgLjyVQCxucQ$
-OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+:Project web page: https://urldefense.com/v3/__http://ocfs2.wiki.kernel.org__;!!GqivPVa7Brio!M_za4-BJ-jyxvI9HpZr8m7YdCXlC2WssU4cPzlq8hlT8wrpBR8uenuTtz3lgLjxHzejs1A$
+:Tools web page: https://urldefense.com/v3/__https://github.com/markfasheh/ocfs2-tools__;!!GqivPVa7Brio!M_za4-BJ-jyxvI9HpZr8m7YdCXlC2WssU4cPzlq8hlT8wrpBR8uenuTtz3lgLjyVQCxucQ$
+:OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
-CREDITS
+Credits
=======
-Some code taken from ramfs which is Copyright (C) 2000 Linus Torvalds
+Some code taken from ramfs which is Copyright |copy| 2000 Linus Torvalds
and Transmeta Corp.
Mark Fasheh <mark.fasheh@oracle.com>
@@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
not automatically create inodes for existing lock resources.
+============ ===========================
Open Flag Lock Request Type
---------- -----------------
+============ ===========================
O_RDONLY Shared Read
O_RDWR Exclusive
+============ ===========================
+
+============ ===========================
Open Flag Resulting Locking Behavior
---------- --------------------------
+============ ===========================
O_NONBLOCK Trylock operation
+============ ===========================
You must provide exactly one of O_RDONLY or O_RDWR.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index ab3b656bbe60..c6885c7ef781 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -58,6 +58,7 @@ Documentation for filesystem implementations.
ceph
cramfs
debugfs
+ dlmfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-18 1:21 ` Joseph Qi
-1 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 1:21 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Use copyright symbol;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +++++++++++++------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 20 insertions(+), 9 deletions(-)
> rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
>
> diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.rst
> similarity index 86%
> rename from Documentation/filesystems/dlmfs.txt
> rename to Documentation/filesystems/dlmfs.rst
> index fcf4d509d118..68daaa7facf9 100644
> --- a/Documentation/filesystems/dlmfs.txt
> +++ b/Documentation/filesystems/dlmfs.rst
> @@ -1,20 +1,25 @@
> -dlmfs
> -==================
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +=====
> +DLMFS
> +=====
> +
> A minimal DLM userspace interface implemented via a virtual file
> system.
>
> dlmfs is built with OCFS2 as it requires most of its infrastructure.
>
> -Project web page: http://ocfs2.wiki.kernel.org
> -Tools web page: https://github.com/markfasheh/ocfs2-tools
> -OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
> +:Project web page: http://ocfs2.wiki.kernel.org
> +:Tools web page: https://github.com/markfasheh/ocfs2-tools
> +:OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
>
> All code copyright 2005 Oracle except when otherwise noted.
>
> -CREDITS
> +Credits
> =======
>
> -Some code taken from ramfs which is Copyright (C) 2000 Linus Torvalds
> +Some code taken from ramfs which is Copyright |copy| 2000 Linus Torvalds
> and Transmeta Corp.
>
> Mark Fasheh <mark.fasheh@oracle.com>
> @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
> open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
> not automatically create inodes for existing lock resources.
>
> +============ ===========================
> Open Flag Lock Request Type
> ---------- -----------------
Better to remove the above line.
> +============ ===========================
> O_RDONLY Shared Read
> O_RDWR Exclusive
> +============ ===========================
>
> +
> +============ ===========================
> Open Flag Resulting Locking Behavior
> ---------- --------------------------
Ditto.
> +============ ===========================
> O_NONBLOCK Trylock operation
> +============ ===========================
>
> You must provide exactly one of O_RDONLY or O_RDWR.
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index ab3b656bbe60..c6885c7ef781 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -58,6 +58,7 @@ Documentation for filesystem implementations.
> ceph
> cramfs
> debugfs
> + dlmfs
> fuse
> overlayfs
> virtiofs
>
^ permalink raw reply [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
@ 2020-02-18 1:21 ` Joseph Qi
0 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 1:21 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Use copyright symbol;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../filesystems/{dlmfs.txt => dlmfs.rst} | 28 +++++++++++++------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 20 insertions(+), 9 deletions(-)
> rename Documentation/filesystems/{dlmfs.txt => dlmfs.rst} (86%)
>
> diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.rst
> similarity index 86%
> rename from Documentation/filesystems/dlmfs.txt
> rename to Documentation/filesystems/dlmfs.rst
> index fcf4d509d118..68daaa7facf9 100644
> --- a/Documentation/filesystems/dlmfs.txt
> +++ b/Documentation/filesystems/dlmfs.rst
> @@ -1,20 +1,25 @@
> -dlmfs
> -==================
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +=====
> +DLMFS
> +=====
> +
> A minimal DLM userspace interface implemented via a virtual file
> system.
>
> dlmfs is built with OCFS2 as it requires most of its infrastructure.
>
> -Project web page: https://urldefense.com/v3/__http://ocfs2.wiki.kernel.org__;!!GqivPVa7Brio!J62vuPuajZiXibdGN7Xohrxt8XascTTzR2T7QluggF2lCXObu6HDN24MqEPApMb9-iEMmg$
> -Tools web page: https://urldefense.com/v3/__https://github.com/markfasheh/ocfs2-tools__;!!GqivPVa7Brio!J62vuPuajZiXibdGN7Xohrxt8XascTTzR2T7QluggF2lCXObu6HDN24MqEPApMb-Q-ssBg$
> -OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
> +:Project web page: https://urldefense.com/v3/__http://ocfs2.wiki.kernel.org__;!!GqivPVa7Brio!J62vuPuajZiXibdGN7Xohrxt8XascTTzR2T7QluggF2lCXObu6HDN24MqEPApMb9-iEMmg$
> +:Tools web page: https://urldefense.com/v3/__https://github.com/markfasheh/ocfs2-tools__;!!GqivPVa7Brio!J62vuPuajZiXibdGN7Xohrxt8XascTTzR2T7QluggF2lCXObu6HDN24MqEPApMb-Q-ssBg$
> +:OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
>
> All code copyright 2005 Oracle except when otherwise noted.
>
> -CREDITS
> +Credits
> =======
>
> -Some code taken from ramfs which is Copyright (C) 2000 Linus Torvalds
> +Some code taken from ramfs which is Copyright |copy| 2000 Linus Torvalds
> and Transmeta Corp.
>
> Mark Fasheh <mark.fasheh@oracle.com>
> @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
> open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
> not automatically create inodes for existing lock resources.
>
> +============ ===========================
> Open Flag Lock Request Type
> ---------- -----------------
Better to remove the above line.
> +============ ===========================
> O_RDONLY Shared Read
> O_RDWR Exclusive
> +============ ===========================
>
> +
> +============ ===========================
> Open Flag Resulting Locking Behavior
> ---------- --------------------------
Ditto.
> +============ ===========================
> O_NONBLOCK Trylock operation
> +============ ===========================
>
> You must provide exactly one of O_RDONLY or O_RDWR.
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index ab3b656bbe60..c6885c7ef781 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -58,6 +58,7 @@ Documentation for filesystem implementations.
> ceph
> cramfs
> debugfs
> + dlmfs
> fuse
> overlayfs
> virtiofs
>
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
2020-02-18 1:21 ` [Ocfs2-devel] " Joseph Qi
@ 2020-02-18 10:07 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:07 UTC (permalink / raw)
To: Joseph Qi
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, ocfs2-devel
Em Tue, 18 Feb 2020 09:21:51 +0800
Joseph Qi <joseph.qi@linux.alibaba.com> escreveu:
> On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
> > @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
> > open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
> > not automatically create inodes for existing lock resources.
> >
> > +============ ===========================
> > Open Flag Lock Request Type
> > ---------- -----------------
>
> Better to remove the above line.
>
> > +============ ===========================
> > O_RDONLY Shared Read
> > O_RDWR Exclusive
> > +============ ===========================
> >
> > +
> > +============ ===========================
> > Open Flag Resulting Locking Behavior
> > ---------- --------------------------
>
> Ditto.
Ok. So, I guess we can just merge the two tables into one, like:
============ =================
O_RDONLY Shared Read
O_RDWR Exclusive
O_NONBLOCK Trylock operation
============ =================
Right?
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
@ 2020-02-18 10:07 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:07 UTC (permalink / raw)
To: Joseph Qi
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, ocfs2-devel
Em Tue, 18 Feb 2020 09:21:51 +0800
Joseph Qi <joseph.qi@linux.alibaba.com> escreveu:
> On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
> > @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
> > open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
> > not automatically create inodes for existing lock resources.
> >
> > +============ ===========================
> > Open Flag Lock Request Type
> > ---------- -----------------
>
> Better to remove the above line.
>
> > +============ ===========================
> > O_RDONLY Shared Read
> > O_RDWR Exclusive
> > +============ ===========================
> >
> > +
> > +============ ===========================
> > Open Flag Resulting Locking Behavior
> > ---------- --------------------------
>
> Ditto.
Ok. So, I guess we can just merge the two tables into one, like:
============ =================
O_RDONLY Shared Read
O_RDWR Exclusive
O_NONBLOCK Trylock operation
============ =================
Right?
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
2020-02-18 10:07 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-18 10:55 ` Joseph Qi
-1 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 10:55 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 18:07, Mauro Carvalho Chehab wrote:
> Em Tue, 18 Feb 2020 09:21:51 +0800
> Joseph Qi <joseph.qi@linux.alibaba.com> escreveu:
>
>> On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
>
>>> @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
>>> open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
>>> not automatically create inodes for existing lock resources.
>>>
>>> +============ ===========================
>>> Open Flag Lock Request Type
>>> ---------- -----------------
>>
>> Better to remove the above line.
>>
>>> +============ ===========================
>>> O_RDONLY Shared Read
>>> O_RDWR Exclusive
>>> +============ ===========================
>>>
>>> +
>>> +============ ===========================
>>> Open Flag Resulting Locking Behavior
>>> ---------- --------------------------
>>
>> Ditto.
>
> Ok. So, I guess we can just merge the two tables into one, like:
>
> ============ =================
> O_RDONLY Shared Read
> O_RDWR Exclusive
> O_NONBLOCK Trylock operation
> ============ =================
>
> Right?
>
I think they should be in different section.
The first two are lock level, while the last is lock behavior.
Thanks,
Joseph
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 12/44] docs: filesystems: convert dlmfs.txt to ReST
@ 2020-02-18 10:55 ` Joseph Qi
0 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 10:55 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 18:07, Mauro Carvalho Chehab wrote:
> Em Tue, 18 Feb 2020 09:21:51 +0800
> Joseph Qi <joseph.qi@linux.alibaba.com> escreveu:
>
>> On 20/2/18 00:11, Mauro Carvalho Chehab wrote:
>
>>> @@ -96,14 +101,19 @@ operation. If the lock succeeds, you'll get an fd.
>>> open(2) with O_CREAT to ensure the resource inode is created - dlmfs does
>>> not automatically create inodes for existing lock resources.
>>>
>>> +============ ===========================
>>> Open Flag Lock Request Type
>>> ---------- -----------------
>>
>> Better to remove the above line.
>>
>>> +============ ===========================
>>> O_RDONLY Shared Read
>>> O_RDWR Exclusive
>>> +============ ===========================
>>>
>>> +
>>> +============ ===========================
>>> Open Flag Resulting Locking Behavior
>>> ---------- --------------------------
>>
>> Ditto.
>
> Ok. So, I guess we can just merge the two tables into one, like:
>
> ============ =================
> O_RDONLY Shared Read
> O_RDWR Exclusive
> O_NONBLOCK Trylock operation
> ============ =================
>
> Right?
>
I think they should be in different section.
The first two are lock level, while the last is lock behavior.
Thanks,
Joseph
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 13/44] docs: filesystems: convert ecryptfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (16 preceding siblings ...)
(?)
@ 2020-02-17 16:11 ` Mauro Carvalho Chehab
2020-02-17 20:07 ` Tyler Hicks
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:11 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Tyler Hicks, ecryptfs
- Add a SPDX header;
- Add a document title;
- use :field: markup;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../{ecryptfs.txt => ecryptfs.rst} | 44 ++++++++++++-------
Documentation/filesystems/index.rst | 1 +
2 files changed, 28 insertions(+), 17 deletions(-)
rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
diff --git a/Documentation/filesystems/ecryptfs.txt b/Documentation/filesystems/ecryptfs.rst
similarity index 70%
rename from Documentation/filesystems/ecryptfs.txt
rename to Documentation/filesystems/ecryptfs.rst
index 01d8a08351ac..7236172300ef 100644
--- a/Documentation/filesystems/ecryptfs.txt
+++ b/Documentation/filesystems/ecryptfs.rst
@@ -1,14 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
eCryptfs: A stacked cryptographic filesystem for Linux
+======================================================
eCryptfs is free software. Please see the file COPYING for details.
For documentation, please see the files in the doc/ subdirectory. For
building and installation instructions please see the INSTALL file.
-Maintainer: Phillip Hellewell
-Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com>
-Developers: Michael C. Thompson
- Kent Yoder
-Web Site: http://ecryptfs.sf.net
+:Maintainer: Phillip Hellewell
+:Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com>
+:Developers: Michael C. Thompson
+ Kent Yoder
+:Web Site: http://ecryptfs.sf.net
This software is currently undergoing development. Make sure to
maintain a backup copy of any data you write into eCryptfs.
@@ -19,13 +23,15 @@ SourceForge site:
http://sourceforge.net/projects/ecryptfs/
Userspace requirements include:
- - David Howells' userspace keyring headers and libraries (version
- 1.0 or higher), obtainable from
- http://people.redhat.com/~dhowells/keyutils/
- - Libgcrypt
+- David Howells' userspace keyring headers and libraries (version
+ 1.0 or higher), obtainable from
+ http://people.redhat.com/~dhowells/keyutils/
+- Libgcrypt
-NOTES
+
+Notes
+=====
In the beta/experimental releases of eCryptfs, when you upgrade
eCryptfs, you should copy the files to an unencrypted location and
@@ -33,20 +39,21 @@ then copy the files back into the new eCryptfs mount to migrate the
files.
-MOUNT-WIDE PASSPHRASE
+Mount-wide Passphrase
+=====================
Create a new directory into which eCryptfs will write its encrypted
files (i.e., /root/crypt). Then, create the mount point directory
-(i.e., /mnt/crypt). Now it's time to mount eCryptfs:
+(i.e., /mnt/crypt). Now it's time to mount eCryptfs::
-mount -t ecryptfs /root/crypt /mnt/crypt
+ mount -t ecryptfs /root/crypt /mnt/crypt
You should be prompted for a passphrase and a salt (the salt may be
blank).
-Try writing a new file:
+Try writing a new file::
-echo "Hello, World" > /mnt/crypt/hello.txt
+ echo "Hello, World" > /mnt/crypt/hello.txt
The operation will complete. Notice that there is a new file in
/root/crypt that is at least 12288 bytes in size (depending on your
@@ -59,10 +66,13 @@ keyctl clear @u
Then umount /mnt/crypt and mount again per the instructions given
above.
-cat /mnt/crypt/hello.txt
+::
+ cat /mnt/crypt/hello.txt
-NOTES
+
+Notes
+=====
eCryptfs version 0.1 should only be mounted on (1) empty directories
or (2) directories containing files only created by eCryptfs. If you
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index c6885c7ef781..d6d69f1c9287 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -59,6 +59,7 @@ Documentation for filesystem implementations.
cramfs
debugfs
dlmfs
+ ecryptfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 13/44] docs: filesystems: convert ecryptfs.txt to ReST
2020-02-17 16:11 ` [PATCH 13/44] docs: filesystems: convert ecryptfs.txt " Mauro Carvalho Chehab
@ 2020-02-17 20:07 ` Tyler Hicks
0 siblings, 0 replies; 112+ messages in thread
From: Tyler Hicks @ 2020-02-17 20:07 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, ecryptfs
On 2020-02-17 17:11:59, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Add a document title;
> - use :field: markup;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Tyler Hicks <code@tyhicks.com>
This serves as a reminder that eCryptfs document is in serious need of
some updates. Thanks!
Tyler
> ---
> .../{ecryptfs.txt => ecryptfs.rst} | 44 ++++++++++++-------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 28 insertions(+), 17 deletions(-)
> rename Documentation/filesystems/{ecryptfs.txt => ecryptfs.rst} (70%)
>
> diff --git a/Documentation/filesystems/ecryptfs.txt b/Documentation/filesystems/ecryptfs.rst
> similarity index 70%
> rename from Documentation/filesystems/ecryptfs.txt
> rename to Documentation/filesystems/ecryptfs.rst
> index 01d8a08351ac..7236172300ef 100644
> --- a/Documentation/filesystems/ecryptfs.txt
> +++ b/Documentation/filesystems/ecryptfs.rst
> @@ -1,14 +1,18 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================================
> eCryptfs: A stacked cryptographic filesystem for Linux
> +======================================================
>
> eCryptfs is free software. Please see the file COPYING for details.
> For documentation, please see the files in the doc/ subdirectory. For
> building and installation instructions please see the INSTALL file.
>
> -Maintainer: Phillip Hellewell
> -Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com>
> -Developers: Michael C. Thompson
> - Kent Yoder
> -Web Site: http://ecryptfs.sf.net
> +:Maintainer: Phillip Hellewell
> +:Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com>
> +:Developers: Michael C. Thompson
> + Kent Yoder
> +:Web Site: http://ecryptfs.sf.net
>
> This software is currently undergoing development. Make sure to
> maintain a backup copy of any data you write into eCryptfs.
> @@ -19,13 +23,15 @@ SourceForge site:
> http://sourceforge.net/projects/ecryptfs/
>
> Userspace requirements include:
> - - David Howells' userspace keyring headers and libraries (version
> - 1.0 or higher), obtainable from
> - http://people.redhat.com/~dhowells/keyutils/
> - - Libgcrypt
>
> +- David Howells' userspace keyring headers and libraries (version
> + 1.0 or higher), obtainable from
> + http://people.redhat.com/~dhowells/keyutils/
> +- Libgcrypt
>
> -NOTES
> +
> +Notes
> +=====
>
> In the beta/experimental releases of eCryptfs, when you upgrade
> eCryptfs, you should copy the files to an unencrypted location and
> @@ -33,20 +39,21 @@ then copy the files back into the new eCryptfs mount to migrate the
> files.
>
>
> -MOUNT-WIDE PASSPHRASE
> +Mount-wide Passphrase
> +=====================
>
> Create a new directory into which eCryptfs will write its encrypted
> files (i.e., /root/crypt). Then, create the mount point directory
> -(i.e., /mnt/crypt). Now it's time to mount eCryptfs:
> +(i.e., /mnt/crypt). Now it's time to mount eCryptfs::
>
> -mount -t ecryptfs /root/crypt /mnt/crypt
> + mount -t ecryptfs /root/crypt /mnt/crypt
>
> You should be prompted for a passphrase and a salt (the salt may be
> blank).
>
> -Try writing a new file:
> +Try writing a new file::
>
> -echo "Hello, World" > /mnt/crypt/hello.txt
> + echo "Hello, World" > /mnt/crypt/hello.txt
>
> The operation will complete. Notice that there is a new file in
> /root/crypt that is at least 12288 bytes in size (depending on your
> @@ -59,10 +66,13 @@ keyctl clear @u
> Then umount /mnt/crypt and mount again per the instructions given
> above.
>
> -cat /mnt/crypt/hello.txt
> +::
>
> + cat /mnt/crypt/hello.txt
>
> -NOTES
> +
> +Notes
> +=====
>
> eCryptfs version 0.1 should only be mounted on (1) empty directories
> or (2) directories containing files only created by eCryptfs. If you
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index c6885c7ef781..d6d69f1c9287 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -59,6 +59,7 @@ Documentation for filesystem implementations.
> cramfs
> debugfs
> dlmfs
> + ecryptfs
> fuse
> overlayfs
> virtiofs
> --
> 2.24.1
>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 14/44] docs: filesystems: convert efivarfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (17 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
Trivial changes:
- Add a SPDX header;
- Adjust document title;
- Mark a literal block as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/{efivarfs.txt => efivarfs.rst} | 5 ++++-
Documentation/filesystems/index.rst | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
rename Documentation/filesystems/{efivarfs.txt => efivarfs.rst} (85%)
diff --git a/Documentation/filesystems/efivarfs.txt b/Documentation/filesystems/efivarfs.rst
similarity index 85%
rename from Documentation/filesystems/efivarfs.txt
rename to Documentation/filesystems/efivarfs.rst
index 686a64bba775..90ac65683e7e 100644
--- a/Documentation/filesystems/efivarfs.txt
+++ b/Documentation/filesystems/efivarfs.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+=======================================
efivarfs - a (U)EFI variable filesystem
+=======================================
The efivarfs filesystem was created to address the shortcomings of
using entries in sysfs to maintain EFI variables. The old sysfs EFI
@@ -11,7 +14,7 @@ than a single page, sysfs isn't the best interface for this.
Variables can be created, deleted and modified with the efivarfs
filesystem.
-efivarfs is typically mounted like this,
+efivarfs is typically mounted like this::
mount -t efivarfs none /sys/firmware/efi/efivars
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index d6d69f1c9287..4230f49d2732 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -60,6 +60,7 @@ Documentation for filesystem implementations.
debugfs
dlmfs
ecryptfs
+ efivarfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 15/44] docs: filesystems: convert erofs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Gao Xiang,
Chao Yu, linux-erofs
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{erofs.txt => erofs.rst} | 175 ++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 103 insertions(+), 73 deletions(-)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
diff --git a/Documentation/filesystems/erofs.txt b/Documentation/filesystems/erofs.rst
similarity index 54%
rename from Documentation/filesystems/erofs.txt
rename to Documentation/filesystems/erofs.rst
index db6d39c3ae71..bf145171c2bf 100644
--- a/Documentation/filesystems/erofs.txt
+++ b/Documentation/filesystems/erofs.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Enhanced Read-Only File System - EROFS
+======================================
+
Overview
========
@@ -6,6 +12,7 @@ from other read-only file systems, it aims to be designed for flexibility,
scalability, but be kept simple and high performance.
It is designed as a better filesystem solution for the following scenarios:
+
- read-only storage media or
- part of a fully trusted read-only solution, which means it needs to be
@@ -17,6 +24,7 @@ It is designed as a better filesystem solution for the following scenarios:
for those embedded devices with limited memory (ex, smartphone);
Here is the main features of EROFS:
+
- Little endian on-disk design;
- Currently 4KB block size (nobh) and therefore maximum 16TB address space;
@@ -24,13 +32,17 @@ Here is the main features of EROFS:
- Metadata & data could be mixed by design;
- 2 inode versions for different requirements:
+
+ ===================== ============ =====================================
compact (v1) extended (v2)
- Inode metadata size: 32 bytes 64 bytes
- Max file size: 4 GB 16 EB (also limited by max. vol size)
- Max uids/gids: 65536 4294967296
- File change time: no yes (64 + 32-bit timestamp)
- Max hardlinks: 65536 4294967296
- Metadata reserved: 4 bytes 14 bytes
+ ===================== ============ =====================================
+ Inode metadata size 32 bytes 64 bytes
+ Max file size 4 GB 16 EB (also limited by max. vol size)
+ Max uids/gids 65536 4294967296
+ File change time no yes (64 + 32-bit timestamp)
+ Max hardlinks 65536 4294967296
+ Metadata reserved 4 bytes 14 bytes
+ ===================== ============ =====================================
- Support extended attributes (xattrs) as an option;
@@ -43,29 +55,36 @@ Here is the main features of EROFS:
The following git tree provides the file system user-space tools under
development (ex, formatting tool mkfs.erofs):
->> git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git
Bugs and patches are welcome, please kindly help us and send to the following
linux-erofs mailing list:
->> linux-erofs mailing list <linux-erofs@lists.ozlabs.org>
+
+- linux-erofs mailing list <linux-erofs@lists.ozlabs.org>
Mount options
=============
+=================== =========================================================
(no)user_xattr Setup Extended User Attributes. Note: xattr is enabled
by default if CONFIG_EROFS_FS_XATTR is selected.
(no)acl Setup POSIX Access Control List. Note: acl is enabled
by default if CONFIG_EROFS_FS_POSIX_ACL is selected.
cache_strategy=%s Select a strategy for cached decompression from now on:
- disabled: In-place I/O decompression only;
- readahead: Cache the last incomplete compressed physical
+
+ ========== =============================================
+ disabled In-place I/O decompression only;
+ readahead Cache the last incomplete compressed physical
cluster for further reading. It still does
in-place I/O decompression for the rest
compressed physical clusters;
- readaround: Cache the both ends of incomplete compressed
+ readaround Cache the both ends of incomplete compressed
physical clusters for further reading.
It still does in-place I/O decompression
for the rest compressed physical clusters.
+ ========== =============================================
+=================== =========================================================
On-disk details
===============
@@ -73,7 +92,7 @@ On-disk details
Summary
-------
Different from other read-only file systems, an EROFS volume is designed
-to be as simple as possible:
+to be as simple as possible::
|-> aligned with the block size
____________________________________________________________
@@ -83,41 +102,45 @@ to be as simple as possible:
All data areas should be aligned with the block size, but metadata areas
may not. All metadatas can be now observed in two different spaces (views):
+
1. Inode metadata space
+
Each valid inode should be aligned with an inode slot, which is a fixed
value (32 bytes) and designed to be kept in line with compact inode size.
Each inode can be directly found with the following formula:
inode offset = meta_blkaddr * block_size + 32 * nid
- |-> aligned with 8B
- |-> followed closely
- + meta_blkaddr blocks |-> another slot
- _____________________________________________________________________
- | ... | inode | xattrs | extents | data inline | ... | inode ...
- |________|_______|(optional)|(optional)|__(optional)_|_____|__________
- |-> aligned with the inode slot size
- . .
- . .
- . .
- . .
- . .
- . .
- .____________________________________________________|-> aligned with 4B
- | xattr_ibody_header | shared xattrs | inline xattrs |
- |____________________|_______________|_______________|
- |-> 12 bytes <-|->x * 4 bytes<-| .
- . . .
- . . .
- . . .
- ._______________________________.______________________.
- | id | id | id | id | ... | id | ent | ... | ent| ... |
- |____|____|____|____|______|____|_____|_____|____|_____|
- |-> aligned with 4B
- |-> aligned with 4B
+ ::
+
+ |-> aligned with 8B
+ |-> followed closely
+ + meta_blkaddr blocks |-> another slot
+ _____________________________________________________________________
+ | ... | inode | xattrs | extents | data inline | ... | inode ...
+ |________|_______|(optional)|(optional)|__(optional)_|_____|__________
+ |-> aligned with the inode slot size
+ . .
+ . .
+ . .
+ . .
+ . .
+ . .
+ .____________________________________________________|-> aligned with 4B
+ | xattr_ibody_header | shared xattrs | inline xattrs |
+ |____________________|_______________|_______________|
+ |-> 12 bytes <-|->x * 4 bytes<-| .
+ . . .
+ . . .
+ . . .
+ ._______________________________.______________________.
+ | id | id | id | id | ... | id | ent | ... | ent| ... |
+ |____|____|____|____|______|____|_____|_____|____|_____|
+ |-> aligned with 4B
+ |-> aligned with 4B
Inode could be 32 or 64 bytes, which can be distinguished from a common
- field which all inode versions have -- i_format:
+ field which all inode versions have -- i_format::
__________________ __________________
| i_format | | i_format |
@@ -132,16 +155,19 @@ may not. All metadatas can be now observed in two different spaces (views):
proper alignment, and they could be optional for different data mappings.
_currently_ total 4 valid data mappings are supported:
+ == ====================================================================
0 flat file data without data inline (no extent);
1 fixed-sized output data compression (with non-compacted indexes);
2 flat file data with tail packing data inline (no extent);
3 fixed-sized output data compression (with compacted indexes, v5.3+).
+ == ====================================================================
The size of the optional xattrs is indicated by i_xattr_count in inode
header. Large xattrs or xattrs shared by many different files can be
stored in shared xattrs metadata rather than inlined right after inode.
2. Shared xattrs metadata space
+
Shared xattrs space is similar to the above inode space, started with
a specific block indicated by xattr_blkaddr, organized one by one with
proper align.
@@ -149,11 +175,13 @@ may not. All metadatas can be now observed in two different spaces (views):
Each share xattr can also be directly found by the following formula:
xattr offset = xattr_blkaddr * block_size + 4 * xattr_id
- |-> aligned by 4 bytes
- + xattr_blkaddr blocks |-> aligned with 4 bytes
- _________________________________________________________________________
- | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
- |________|_____________|_____________|_____|______________|_______________
+ ::
+
+ |-> aligned by 4 bytes
+ + xattr_blkaddr blocks |-> aligned with 4 bytes
+ _________________________________________________________________________
+ | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
+ |________|_____________|_____________|_____|______________|_______________
Directories
-----------
@@ -163,19 +191,21 @@ random file lookup, and all directory entries are _strictly_ recorded in
alphabetical order in order to support improved prefix binary search
algorithm (could refer to the related source code).
- ___________________________
- / |
- / ______________|________________
- / / | nameoff1 | nameoffN-1
- ____________.______________._______________v________________v__________
-| dirent | dirent | ... | dirent | filename | filename | ... | filename |
-|___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
- \ ^
- \ | * could have
- \ | trailing '\0'
- \________________________| nameoff0
+::
- Directory block
+ ___________________________
+ / |
+ / ______________|________________
+ / / | nameoff1 | nameoffN-1
+ ____________.______________._______________v________________v__________
+ | dirent | dirent | ... | dirent | filename | filename | ... | filename |
+ |___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
+ \ ^
+ \ | * could have
+ \ | trailing '\0'
+ \________________________| nameoff0
+
+ Directory block
Note that apart from the offset of the first filename, nameoff0 also indicates
the total number of directory entries in this block since it is no need to
@@ -184,28 +214,27 @@ introduce another on-disk field at all.
Compression
-----------
Currently, EROFS supports 4KB fixed-sized output transparent file compression,
-as illustrated below:
+as illustrated below::
- |---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
- clusterofs clusterofs clusterofs
- | | | logical data
-_________v_______________________________v_____________________v_______________
-... | . | | . | | . | ...
-____|____.________|_____________|________.____|_____________|__.__________|____
- |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|
- size size size size size
- . . . .
- . . . .
- . . . .
- _______._____________._____________._____________._____________________
- ... | | | | ... physical data
- _______|_____________|_____________|_____________|_____________________
- |-> cluster <-|-> cluster <-|-> cluster <-|
- size size size
+ |---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
+ clusterofs clusterofs clusterofs
+ | | | logical data
+ _________v_______________________________v_____________________v_______________
+ ... | . | | . | | . | ...
+ ____|____.________|_____________|________.____|_____________|__.__________|____
+ |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|
+ size size size size size
+ . . . .
+ . . . .
+ . . . .
+ _______._____________._____________._____________._____________________
+ ... | | | | ... physical data
+ _______|_____________|_____________|_____________|_____________________
+ |-> cluster <-|-> cluster <-|-> cluster <-|
+ size size size
Currently each on-disk physical cluster can contain 4KB (un)compressed data
at most. For each logical cluster, there is a corresponding on-disk index to
describe its cluster type, physical cluster address, etc.
See "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details.
-
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 4230f49d2732..03a493b27920 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -61,6 +61,7 @@ Documentation for filesystem implementations.
dlmfs
ecryptfs
efivarfs
+ erofs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 15/44] docs: filesystems: convert erofs.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Jonathan Corbet, Mauro Carvalho Chehab, linux-fsdevel, Gao Xiang,
linux-erofs
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{erofs.txt => erofs.rst} | 175 ++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 103 insertions(+), 73 deletions(-)
rename Documentation/filesystems/{erofs.txt => erofs.rst} (54%)
diff --git a/Documentation/filesystems/erofs.txt b/Documentation/filesystems/erofs.rst
similarity index 54%
rename from Documentation/filesystems/erofs.txt
rename to Documentation/filesystems/erofs.rst
index db6d39c3ae71..bf145171c2bf 100644
--- a/Documentation/filesystems/erofs.txt
+++ b/Documentation/filesystems/erofs.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Enhanced Read-Only File System - EROFS
+======================================
+
Overview
========
@@ -6,6 +12,7 @@ from other read-only file systems, it aims to be designed for flexibility,
scalability, but be kept simple and high performance.
It is designed as a better filesystem solution for the following scenarios:
+
- read-only storage media or
- part of a fully trusted read-only solution, which means it needs to be
@@ -17,6 +24,7 @@ It is designed as a better filesystem solution for the following scenarios:
for those embedded devices with limited memory (ex, smartphone);
Here is the main features of EROFS:
+
- Little endian on-disk design;
- Currently 4KB block size (nobh) and therefore maximum 16TB address space;
@@ -24,13 +32,17 @@ Here is the main features of EROFS:
- Metadata & data could be mixed by design;
- 2 inode versions for different requirements:
+
+ ===================== ============ =====================================
compact (v1) extended (v2)
- Inode metadata size: 32 bytes 64 bytes
- Max file size: 4 GB 16 EB (also limited by max. vol size)
- Max uids/gids: 65536 4294967296
- File change time: no yes (64 + 32-bit timestamp)
- Max hardlinks: 65536 4294967296
- Metadata reserved: 4 bytes 14 bytes
+ ===================== ============ =====================================
+ Inode metadata size 32 bytes 64 bytes
+ Max file size 4 GB 16 EB (also limited by max. vol size)
+ Max uids/gids 65536 4294967296
+ File change time no yes (64 + 32-bit timestamp)
+ Max hardlinks 65536 4294967296
+ Metadata reserved 4 bytes 14 bytes
+ ===================== ============ =====================================
- Support extended attributes (xattrs) as an option;
@@ -43,29 +55,36 @@ Here is the main features of EROFS:
The following git tree provides the file system user-space tools under
development (ex, formatting tool mkfs.erofs):
->> git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git
Bugs and patches are welcome, please kindly help us and send to the following
linux-erofs mailing list:
->> linux-erofs mailing list <linux-erofs@lists.ozlabs.org>
+
+- linux-erofs mailing list <linux-erofs@lists.ozlabs.org>
Mount options
=============
+=================== =========================================================
(no)user_xattr Setup Extended User Attributes. Note: xattr is enabled
by default if CONFIG_EROFS_FS_XATTR is selected.
(no)acl Setup POSIX Access Control List. Note: acl is enabled
by default if CONFIG_EROFS_FS_POSIX_ACL is selected.
cache_strategy=%s Select a strategy for cached decompression from now on:
- disabled: In-place I/O decompression only;
- readahead: Cache the last incomplete compressed physical
+
+ ========== =============================================
+ disabled In-place I/O decompression only;
+ readahead Cache the last incomplete compressed physical
cluster for further reading. It still does
in-place I/O decompression for the rest
compressed physical clusters;
- readaround: Cache the both ends of incomplete compressed
+ readaround Cache the both ends of incomplete compressed
physical clusters for further reading.
It still does in-place I/O decompression
for the rest compressed physical clusters.
+ ========== =============================================
+=================== =========================================================
On-disk details
===============
@@ -73,7 +92,7 @@ On-disk details
Summary
-------
Different from other read-only file systems, an EROFS volume is designed
-to be as simple as possible:
+to be as simple as possible::
|-> aligned with the block size
____________________________________________________________
@@ -83,41 +102,45 @@ to be as simple as possible:
All data areas should be aligned with the block size, but metadata areas
may not. All metadatas can be now observed in two different spaces (views):
+
1. Inode metadata space
+
Each valid inode should be aligned with an inode slot, which is a fixed
value (32 bytes) and designed to be kept in line with compact inode size.
Each inode can be directly found with the following formula:
inode offset = meta_blkaddr * block_size + 32 * nid
- |-> aligned with 8B
- |-> followed closely
- + meta_blkaddr blocks |-> another slot
- _____________________________________________________________________
- | ... | inode | xattrs | extents | data inline | ... | inode ...
- |________|_______|(optional)|(optional)|__(optional)_|_____|__________
- |-> aligned with the inode slot size
- . .
- . .
- . .
- . .
- . .
- . .
- .____________________________________________________|-> aligned with 4B
- | xattr_ibody_header | shared xattrs | inline xattrs |
- |____________________|_______________|_______________|
- |-> 12 bytes <-|->x * 4 bytes<-| .
- . . .
- . . .
- . . .
- ._______________________________.______________________.
- | id | id | id | id | ... | id | ent | ... | ent| ... |
- |____|____|____|____|______|____|_____|_____|____|_____|
- |-> aligned with 4B
- |-> aligned with 4B
+ ::
+
+ |-> aligned with 8B
+ |-> followed closely
+ + meta_blkaddr blocks |-> another slot
+ _____________________________________________________________________
+ | ... | inode | xattrs | extents | data inline | ... | inode ...
+ |________|_______|(optional)|(optional)|__(optional)_|_____|__________
+ |-> aligned with the inode slot size
+ . .
+ . .
+ . .
+ . .
+ . .
+ . .
+ .____________________________________________________|-> aligned with 4B
+ | xattr_ibody_header | shared xattrs | inline xattrs |
+ |____________________|_______________|_______________|
+ |-> 12 bytes <-|->x * 4 bytes<-| .
+ . . .
+ . . .
+ . . .
+ ._______________________________.______________________.
+ | id | id | id | id | ... | id | ent | ... | ent| ... |
+ |____|____|____|____|______|____|_____|_____|____|_____|
+ |-> aligned with 4B
+ |-> aligned with 4B
Inode could be 32 or 64 bytes, which can be distinguished from a common
- field which all inode versions have -- i_format:
+ field which all inode versions have -- i_format::
__________________ __________________
| i_format | | i_format |
@@ -132,16 +155,19 @@ may not. All metadatas can be now observed in two different spaces (views):
proper alignment, and they could be optional for different data mappings.
_currently_ total 4 valid data mappings are supported:
+ == ====================================================================
0 flat file data without data inline (no extent);
1 fixed-sized output data compression (with non-compacted indexes);
2 flat file data with tail packing data inline (no extent);
3 fixed-sized output data compression (with compacted indexes, v5.3+).
+ == ====================================================================
The size of the optional xattrs is indicated by i_xattr_count in inode
header. Large xattrs or xattrs shared by many different files can be
stored in shared xattrs metadata rather than inlined right after inode.
2. Shared xattrs metadata space
+
Shared xattrs space is similar to the above inode space, started with
a specific block indicated by xattr_blkaddr, organized one by one with
proper align.
@@ -149,11 +175,13 @@ may not. All metadatas can be now observed in two different spaces (views):
Each share xattr can also be directly found by the following formula:
xattr offset = xattr_blkaddr * block_size + 4 * xattr_id
- |-> aligned by 4 bytes
- + xattr_blkaddr blocks |-> aligned with 4 bytes
- _________________________________________________________________________
- | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
- |________|_____________|_____________|_____|______________|_______________
+ ::
+
+ |-> aligned by 4 bytes
+ + xattr_blkaddr blocks |-> aligned with 4 bytes
+ _________________________________________________________________________
+ | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
+ |________|_____________|_____________|_____|______________|_______________
Directories
-----------
@@ -163,19 +191,21 @@ random file lookup, and all directory entries are _strictly_ recorded in
alphabetical order in order to support improved prefix binary search
algorithm (could refer to the related source code).
- ___________________________
- / |
- / ______________|________________
- / / | nameoff1 | nameoffN-1
- ____________.______________._______________v________________v__________
-| dirent | dirent | ... | dirent | filename | filename | ... | filename |
-|___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
- \ ^
- \ | * could have
- \ | trailing '\0'
- \________________________| nameoff0
+::
- Directory block
+ ___________________________
+ / |
+ / ______________|________________
+ / / | nameoff1 | nameoffN-1
+ ____________.______________._______________v________________v__________
+ | dirent | dirent | ... | dirent | filename | filename | ... | filename |
+ |___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
+ \ ^
+ \ | * could have
+ \ | trailing '\0'
+ \________________________| nameoff0
+
+ Directory block
Note that apart from the offset of the first filename, nameoff0 also indicates
the total number of directory entries in this block since it is no need to
@@ -184,28 +214,27 @@ introduce another on-disk field at all.
Compression
-----------
Currently, EROFS supports 4KB fixed-sized output transparent file compression,
-as illustrated below:
+as illustrated below::
- |---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
- clusterofs clusterofs clusterofs
- | | | logical data
-_________v_______________________________v_____________________v_______________
-... | . | | . | | . | ...
-____|____.________|_____________|________.____|_____________|__.__________|____
- |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|
- size size size size size
- . . . .
- . . . .
- . . . .
- _______._____________._____________._____________._____________________
- ... | | | | ... physical data
- _______|_____________|_____________|_____________|_____________________
- |-> cluster <-|-> cluster <-|-> cluster <-|
- size size size
+ |---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
+ clusterofs clusterofs clusterofs
+ | | | logical data
+ _________v_______________________________v_____________________v_______________
+ ... | . | | . | | . | ...
+ ____|____.________|_____________|________.____|_____________|__.__________|____
+ |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|
+ size size size size size
+ . . . .
+ . . . .
+ . . . .
+ _______._____________._____________._____________._____________________
+ ... | | | | ... physical data
+ _______|_____________|_____________|_____________|_____________________
+ |-> cluster <-|-> cluster <-|-> cluster <-|
+ size size size
Currently each on-disk physical cluster can contain 4KB (un)compressed data
at most. For each logical cluster, there is a corresponding on-disk index to
describe its cluster type, physical cluster address, etc.
See "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details.
-
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 4230f49d2732..03a493b27920 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -61,6 +61,7 @@ Documentation for filesystem implementations.
dlmfs
ecryptfs
efivarfs
+ erofs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread
* [PATCH 16/44] docs: filesystems: convert ext2.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (19 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
2020-02-18 7:11 ` Jan Kara
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Jan Kara,
linux-ext4
- Add a SPDX header;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Use footnoote markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{ext2.txt => ext2.rst} | 41 ++++++++++++-------
Documentation/filesystems/index.rst | 1 +
2 files changed, 27 insertions(+), 15 deletions(-)
rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.rst
similarity index 91%
rename from Documentation/filesystems/ext2.txt
rename to Documentation/filesystems/ext2.rst
index 94c2cf0292f5..d83dbbb162e2 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
The Second Extended Filesystem
==============================
@@ -14,8 +16,9 @@ Options
Most defaults are determined by the filesystem superblock, and can be
set using tune2fs(8). Kernel-determined defaults are indicated by (*).
-bsddf (*) Makes `df' act like BSD.
-minixdf Makes `df' act like Minix.
+==================== === ================================================
+bsddf (*) Makes ``df`` act like BSD.
+minixdf Makes ``df`` act like Minix.
check=none, nocheck (*) Don't do extra checking of bitmaps on mount
(check=normal and check=strict options removed)
@@ -62,6 +65,7 @@ quota, usrquota Enable user disk quota support
grpquota Enable group disk quota support
(requires CONFIG_QUOTA).
+==================== === ================================================
noquota option ls silently ignored by ext2.
@@ -294,9 +298,9 @@ respective fsck programs.
If you're exceptionally paranoid, there are 3 ways of making metadata
writes synchronous on ext2:
-per-file if you have the program source: use the O_SYNC flag to open()
-per-file if you don't have the source: use "chattr +S" on the file
-per-filesystem: add the "sync" option to mount (or in /etc/fstab)
+- per-file if you have the program source: use the O_SYNC flag to open()
+- per-file if you don't have the source: use "chattr +S" on the file
+- per-filesystem: add the "sync" option to mount (or in /etc/fstab)
the first and last are not ext2 specific but do force the metadata to
be written synchronously. See also Journaling below.
@@ -316,10 +320,12 @@ Most of these limits could be overcome with slight changes in the on-disk
format and using a compatibility flag to signal the format change (at
the expense of some compatibility).
-Filesystem block size: 1kB 2kB 4kB 8kB
-
-File size limit: 16GB 256GB 2048GB 2048GB
-Filesystem size limit: 2047GB 8192GB 16384GB 32768GB
+===================== ======= ======= ======= ========
+Filesystem block size 1kB 2kB 4kB 8kB
+===================== ======= ======= ======= ========
+File size limit 16GB 256GB 2048GB 2048GB
+Filesystem size limit 2047GB 8192GB 16384GB 32768GB
+===================== ======= ======= ======= ========
There is a 2.4 kernel limit of 2048GB for a single block device, so no
filesystem larger than that can be created at this time. There is also
@@ -370,19 +376,24 @@ ext4 and journaling.
References
==========
+======================= ===============================================
The kernel source file:/usr/src/linux/fs/ext2/
e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/
Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html
Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/
Filesystem Resizing http://ext2resize.sourceforge.net/
-Compression (*) http://e2compr.sourceforge.net/
+Compression [1]_ http://e2compr.sourceforge.net/
+======================= ===============================================
Implementations for:
+
+======================= ===========================================================
Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs
-Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2
-DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2 (+) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+Windows 95 [1]_ http://www.yipton.net/content.html#FSDEXT2
+DOS client [1]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+OS/2 [2]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
+======================= ===========================================================
-(*) no longer actively developed/supported (as of Apr 2001)
-(+) no longer actively developed/supported (as of Mar 2009)
+.. [1] no longer actively developed/supported (as of Apr 2001)
+.. [2] no longer actively developed/supported (as of Mar 2009)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 03a493b27920..102b3b65486a 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -62,6 +62,7 @@ Documentation for filesystem implementations.
ecryptfs
efivarfs
erofs
+ ext2
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 16/44] docs: filesystems: convert ext2.txt to ReST
2020-02-17 16:12 ` [PATCH 16/44] docs: filesystems: convert ext2.txt " Mauro Carvalho Chehab
@ 2020-02-18 7:11 ` Jan Kara
0 siblings, 0 replies; 112+ messages in thread
From: Jan Kara @ 2020-02-18 7:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, Jan Kara,
linux-ext4
On Mon 17-02-20 17:12:02, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Use footnoote markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thanks! You can add:
Acked-by: Jan Kara <jack@suse.cz>
Again, please tell me if you want me to pickup this patch.
Honza
> ---
> .../filesystems/{ext2.txt => ext2.rst} | 41 ++++++++++++-------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 27 insertions(+), 15 deletions(-)
> rename Documentation/filesystems/{ext2.txt => ext2.rst} (91%)
>
> diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.rst
> similarity index 91%
> rename from Documentation/filesystems/ext2.txt
> rename to Documentation/filesystems/ext2.rst
> index 94c2cf0292f5..d83dbbb162e2 100644
> --- a/Documentation/filesystems/ext2.txt
> +++ b/Documentation/filesystems/ext2.rst
> @@ -1,3 +1,5 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
>
> The Second Extended Filesystem
> ==============================
> @@ -14,8 +16,9 @@ Options
> Most defaults are determined by the filesystem superblock, and can be
> set using tune2fs(8). Kernel-determined defaults are indicated by (*).
>
> -bsddf (*) Makes `df' act like BSD.
> -minixdf Makes `df' act like Minix.
> +==================== === ================================================
> +bsddf (*) Makes ``df`` act like BSD.
> +minixdf Makes ``df`` act like Minix.
>
> check=none, nocheck (*) Don't do extra checking of bitmaps on mount
> (check=normal and check=strict options removed)
> @@ -62,6 +65,7 @@ quota, usrquota Enable user disk quota support
>
> grpquota Enable group disk quota support
> (requires CONFIG_QUOTA).
> +==================== === ================================================
>
> noquota option ls silently ignored by ext2.
>
> @@ -294,9 +298,9 @@ respective fsck programs.
> If you're exceptionally paranoid, there are 3 ways of making metadata
> writes synchronous on ext2:
>
> -per-file if you have the program source: use the O_SYNC flag to open()
> -per-file if you don't have the source: use "chattr +S" on the file
> -per-filesystem: add the "sync" option to mount (or in /etc/fstab)
> +- per-file if you have the program source: use the O_SYNC flag to open()
> +- per-file if you don't have the source: use "chattr +S" on the file
> +- per-filesystem: add the "sync" option to mount (or in /etc/fstab)
>
> the first and last are not ext2 specific but do force the metadata to
> be written synchronously. See also Journaling below.
> @@ -316,10 +320,12 @@ Most of these limits could be overcome with slight changes in the on-disk
> format and using a compatibility flag to signal the format change (at
> the expense of some compatibility).
>
> -Filesystem block size: 1kB 2kB 4kB 8kB
> -
> -File size limit: 16GB 256GB 2048GB 2048GB
> -Filesystem size limit: 2047GB 8192GB 16384GB 32768GB
> +===================== ======= ======= ======= ========
> +Filesystem block size 1kB 2kB 4kB 8kB
> +===================== ======= ======= ======= ========
> +File size limit 16GB 256GB 2048GB 2048GB
> +Filesystem size limit 2047GB 8192GB 16384GB 32768GB
> +===================== ======= ======= ======= ========
>
> There is a 2.4 kernel limit of 2048GB for a single block device, so no
> filesystem larger than that can be created at this time. There is also
> @@ -370,19 +376,24 @@ ext4 and journaling.
> References
> ==========
>
> +======================= ===============================================
> The kernel source file:/usr/src/linux/fs/ext2/
> e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/
> Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html
> Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/
> Filesystem Resizing http://ext2resize.sourceforge.net/
> -Compression (*) http://e2compr.sourceforge.net/
> +Compression [1]_ http://e2compr.sourceforge.net/
> +======================= ===============================================
>
> Implementations for:
> +
> +======================= ===========================================================
> Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs
> -Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2
> -DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
> -OS/2 (+) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
> +Windows 95 [1]_ http://www.yipton.net/content.html#FSDEXT2
> +DOS client [1]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
> +OS/2 [2]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
> RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
> +======================= ===========================================================
>
> -(*) no longer actively developed/supported (as of Apr 2001)
> -(+) no longer actively developed/supported (as of Mar 2009)
> +.. [1] no longer actively developed/supported (as of Apr 2001)
> +.. [2] no longer actively developed/supported (as of Mar 2009)
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index 03a493b27920..102b3b65486a 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -62,6 +62,7 @@ Documentation for filesystem implementations.
> ecryptfs
> efivarfs
> erofs
> + ext2
> fuse
> overlayfs
> virtiofs
> --
> 2.24.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 17/44] docs: filesystems: convert ext3.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (20 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
Nothing really required here. Just renaming would be enough.
Yet, while here, lets add a SPDX header and adjust document title
to met the same standard we're using on most docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/{ext3.txt => ext3.rst} | 2 ++
Documentation/filesystems/index.rst | 1 +
2 files changed, 3 insertions(+)
rename Documentation/filesystems/{ext3.txt => ext3.rst} (88%)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.rst
similarity index 88%
rename from Documentation/filesystems/ext3.txt
rename to Documentation/filesystems/ext3.rst
index 58758fbef9e0..c06cec3a8fdc 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.rst
@@ -1,4 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+===============
Ext3 Filesystem
===============
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 102b3b65486a..aa2c3d1de3de 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -63,6 +63,7 @@ Documentation for filesystem implementations.
efivarfs
erofs
ext2
+ ext3
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 18/44] docs: filesystems: convert f2fs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Jaegeuk Kim, Chao Yu, linux-f2fs-devel
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{f2fs.txt => f2fs.rst} | 252 ++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 143 insertions(+), 110 deletions(-)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.rst
similarity index 84%
rename from Documentation/filesystems/f2fs.txt
rename to Documentation/filesystems/f2fs.rst
index 4eb3e2ddd00e..d681203728d7 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.rst
@@ -1,6 +1,8 @@
-================================================================================
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
WHAT IS Flash-Friendly File System (F2FS)?
-================================================================================
+==========================================
NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have
been equipped on a variety systems ranging from mobile to server systems. Since
@@ -20,14 +22,15 @@ layout, but also for selecting allocation and cleaning algorithms.
The following git tree provides the file system formatting tool (mkfs.f2fs),
a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs).
->> git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
For reporting bugs and sending patches, please use the following mailing list:
->> linux-f2fs-devel@lists.sourceforge.net
-================================================================================
-BACKGROUND AND DESIGN ISSUES
-================================================================================
+- linux-f2fs-devel@lists.sourceforge.net
+
+Background and Design issues
+============================
Log-structured File System (LFS)
--------------------------------
@@ -61,6 +64,7 @@ needs to reclaim these obsolete blocks seamlessly to users. This job is called
as a cleaning process.
The process consists of three operations as follows.
+
1. A victim segment is selected through referencing segment usage table.
2. It loads parent index structures of all the data in the victim identified by
segment summary blocks.
@@ -71,9 +75,8 @@ This cleaning job may cause unexpected long delays, so the most important goal
is to hide the latencies to users. And also definitely, it should reduce the
amount of valid data to be moved, and move them quickly as well.
-================================================================================
-KEY FEATURES
-================================================================================
+Key Features
+============
Flash Awareness
---------------
@@ -94,10 +97,11 @@ Cleaning Overhead
- Support multi-head logs for static/dynamic hot and cold data separation
- Introduce adaptive logging for efficient block allocation
-================================================================================
-MOUNT OPTIONS
-================================================================================
+Mount Options
+=============
+
+====================== ============================================================
background_gc=%s Turn on/off cleaning operations, namely garbage
collection, triggered in background when I/O subsystem is
idle. If background_gc=on, it will turn on the garbage
@@ -167,7 +171,10 @@ fault_injection=%d Enable fault injection in all supported types with
fault_type=%d Support configuring fault injection type, should be
enabled with fault_injection option, fault type value
is shown below, it supports single or combined type.
+
+ =================== ===========
Type_Name Type_Value
+ =================== ===========
FAULT_KMALLOC 0x000000001
FAULT_KVMALLOC 0x000000002
FAULT_PAGE_ALLOC 0x000000004
@@ -183,6 +190,7 @@ fault_type=%d Support configuring fault injection type, should be
FAULT_CHECKPOINT 0x000001000
FAULT_DISCARD 0x000002000
FAULT_WRITE_IO 0x000004000
+ =================== ===========
mode=%s Control block allocation mode which supports "adaptive"
and "lfs". In "lfs" mode, there should be no random
writes towards main area.
@@ -219,7 +227,7 @@ fsync_mode=%s Control the policy of fsync. Currently supports "posix",
non-atomic files likewise "nobarrier" mount option.
test_dummy_encryption Enable dummy encryption, which provides a fake fscrypt
context. The fake fscrypt context is used by xfstests.
-checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
+checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
to reenable checkpointing. Is enabled by default. While
disabled, any unmounting or unexpected shutdowns will cause
the filesystem contents to appear as they did when the
@@ -246,22 +254,22 @@ compress_extension=%s Support adding specified extension, so that f2fs can enab
on compression extension list and enable compression on
these file by default rather than to enable it via ioctl.
For other files, we can still enable compression via ioctl.
+====================== ============================================================
-================================================================================
-DEBUGFS ENTRIES
-================================================================================
+Debugfs Entries
+===============
/sys/kernel/debug/f2fs/ contains information about all the partitions mounted as
f2fs. Each file shows the whole f2fs information.
/sys/kernel/debug/f2fs/status includes:
+
- major file system information managed by f2fs currently
- average SIT information about whole segments
- current memory footprint consumed by f2fs.
-================================================================================
-SYSFS ENTRIES
-================================================================================
+Sysfs Entries
+=============
Information about mounted f2fs file systems can be found in
/sys/fs/f2fs. Each mounted filesystem will have a directory in
@@ -271,22 +279,24 @@ The files in each per-device directory are shown in table below.
Files in /sys/fs/f2fs/<devname>
(see also Documentation/ABI/testing/sysfs-fs-f2fs)
-================================================================================
-USAGE
-================================================================================
+Usage
+=====
1. Download userland tools and compile them.
2. Skip, if f2fs was compiled statically inside kernel.
- Otherwise, insert the f2fs.ko module.
- # insmod f2fs.ko
+ Otherwise, insert the f2fs.ko module::
-3. Create a directory trying to mount
- # mkdir /mnt/f2fs
+ # insmod f2fs.ko
-4. Format the block device, and then mount as f2fs
- # mkfs.f2fs -l label /dev/block_device
- # mount -t f2fs /dev/block_device /mnt/f2fs
+3. Create a directory trying to mount::
+
+ # mkdir /mnt/f2fs
+
+4. Format the block device, and then mount as f2fs::
+
+ # mkfs.f2fs -l label /dev/block_device
+ # mount -t f2fs /dev/block_device /mnt/f2fs
mkfs.f2fs
---------
@@ -294,18 +304,26 @@ The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem,
which builds a basic on-disk layout.
The options consist of:
--l [label] : Give a volume label, up to 512 unicode name.
--a [0 or 1] : Split start location of each area for heap-based allocation.
- 1 is set by default, which performs this.
--o [int] : Set overprovision ratio in percent over volume size.
- 5 is set by default.
--s [int] : Set the number of segments per section.
- 1 is set by default.
--z [int] : Set the number of sections per zone.
- 1 is set by default.
--e [str] : Set basic extension list. e.g. "mp3,gif,mov"
--t [0 or 1] : Disable discard command or not.
- 1 is set by default, which conducts discard.
+
+=============== ===========================================================
+``-l [label]`` Give a volume label, up to 512 unicode name.
+``-a [0 or 1]`` Split start location of each area for heap-based allocation.
+
+ 1 is set by default, which performs this.
+``-o [int]`` Set overprovision ratio in percent over volume size.
+
+ 5 is set by default.
+``-s [int]`` Set the number of segments per section.
+
+ 1 is set by default.
+``-z [int]`` Set the number of sections per zone.
+
+ 1 is set by default.
+``-e [str]`` Set basic extension list. e.g. "mp3,gif,mov"
+``-t [0 or 1]`` Disable discard command or not.
+
+ 1 is set by default, which conducts discard.
+=============== ===========================================================
fsck.f2fs
---------
@@ -314,7 +332,8 @@ partition, which examines whether the filesystem metadata and user-made data
are cross-referenced correctly or not.
Note that, initial version of the tool does not fix any inconsistency.
-The options consist of:
+The options consist of::
+
-d debug level [default:0]
dump.f2fs
@@ -327,20 +346,21 @@ It shows on-disk inode information recognized by a given inode number, and is
able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and
./dump_sit respectively.
-The options consist of:
+The options consist of::
+
-d debug level [default:0]
-i inode no (hex)
-s [SIT dump segno from #1~#2 (decimal), for all 0~-1]
-a [SSA dump segno from #1~#2 (decimal), for all 0~-1]
-Examples:
-# dump.f2fs -i [ino] /dev/sdx
-# dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
-# dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
+Examples::
-================================================================================
-DESIGN
-================================================================================
+ # dump.f2fs -i [ino] /dev/sdx
+ # dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
+ # dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
+
+Design
+======
On-disk Layout
--------------
@@ -351,7 +371,7 @@ consists of a set of sections. By default, section and zone sizes are set to one
segment size identically, but users can easily modify the sizes by mkfs.
F2FS splits the entire volume into six areas, and all the areas except superblock
-consists of multiple segments as described below.
+consists of multiple segments as described below::
align with the zone size <-|
|-> align with the segment size
@@ -373,28 +393,28 @@ consists of multiple segments as described below.
|__zone__|
- Superblock (SB)
- : It is located at the beginning of the partition, and there exist two copies
+ It is located at the beginning of the partition, and there exist two copies
to avoid file system crash. It contains basic partition information and some
default parameters of f2fs.
- Checkpoint (CP)
- : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
+ It contains file system information, bitmaps for valid NAT/SIT sets, orphan
inode lists, and summary entries of current active segments.
- Segment Information Table (SIT)
- : It contains segment information such as valid block count and bitmap for the
+ It contains segment information such as valid block count and bitmap for the
validity of all the blocks.
- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
+ It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Summary Area (SSA)
- : It contains summary entries which contains the owner information of all the
+ It contains summary entries which contains the owner information of all the
data and node blocks stored in Main area.
- Main Area
- : It contains file and directory data including their indices.
+ It contains file and directory data including their indices.
In order to avoid misalignment between file system and flash-based storage, F2FS
aligns the start block address of CP with the segment size. Also, it aligns the
@@ -414,7 +434,7 @@ One of them always indicates the last valid data, which is called as shadow copy
mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism.
For file system consistency, each CP points to which NAT and SIT copies are
-valid, as shown as below.
+valid, as shown as below::
+--------+----------+---------+
| CP | SIT | NAT |
@@ -438,7 +458,7 @@ indirect node. F2FS assigns 4KB to an inode block which contains 923 data block
indices, two direct node pointers, two indirect node pointers, and one double
indirect node pointer as described below. One direct node block contains 1018
data blocks, and one indirect node block contains also 1018 node blocks. Thus,
-one inode block (i.e., a file) covers:
+one inode block (i.e., a file) covers::
4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB.
@@ -473,6 +493,8 @@ A dentry block consists of 214 dentry slots and file names. Therein a bitmap is
used to represent whether each dentry is valid or not. A dentry block occupies
4KB with the following composition.
+::
+
Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) +
dentries(11 * 214 bytes) + file name (8 * 214 bytes)
@@ -498,23 +520,25 @@ F2FS implements multi-level hash tables for directory structure. Each level has
a hash table with dedicated number of hash buckets as shown below. Note that
"A(2B)" means a bucket includes 2 data blocks.
-----------------------
-A : bucket
-B : block
-N : MAX_DIR_HASH_DEPTH
-----------------------
+::
-level #0 | A(2B)
- |
-level #1 | A(2B) - A(2B)
- |
-level #2 | A(2B) - A(2B) - A(2B) - A(2B)
- . | . . . .
-level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
- . | . . . .
-level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
+ ----------------------
+ A : bucket
+ B : block
+ N : MAX_DIR_HASH_DEPTH
+ ----------------------
-The number of blocks and buckets are determined by,
+ level #0 | A(2B)
+ |
+ level #1 | A(2B) - A(2B)
+ |
+ level #2 | A(2B) - A(2B) - A(2B) - A(2B)
+ . | . . . .
+ level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
+ . | . . . .
+ level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
+
+The number of blocks and buckets are determined by::
,- 2, if n < MAX_DIR_HASH_DEPTH / 2,
# of blocks in level #n = |
@@ -532,7 +556,7 @@ dentry consisting of the file name and its inode number. If not found, F2FS
scans the next hash table in level #1. In this way, F2FS scans hash tables in
each levels incrementally from 1 to N. In each levels F2FS needs to scan only
one bucket determined by the following equation, which shows O(log(# of files))
-complexity.
+complexity::
bucket number to scan in level #n = (hash value) % (# of buckets in level #n)
@@ -540,7 +564,8 @@ In the case of file creation, F2FS finds empty consecutive slots that cover the
file name. F2FS searches the empty slots in the hash tables of whole levels from
1 to N in the same way as the lookup operation.
-The following figure shows an example of two cases holding children.
+The following figure shows an example of two cases holding children::
+
--------------> Dir <--------------
| |
child child
@@ -611,14 +636,15 @@ Write-hint Policy
2) whint_mode=user-based. F2FS tries to pass down hints given by
users.
+===================== ======================== ===================
User F2FS Block
----- ---- -----
+===================== ======================== ===================
META WRITE_LIFE_NOT_SET
HOT_NODE "
WARM_NODE "
COLD_NODE "
-*ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
-*extension list " "
+ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
+extension list " "
-- buffered io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
@@ -635,11 +661,13 @@ WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
+===================== ======================== ===================
3) whint_mode=fs-based. F2FS passes down hints with its policy.
+===================== ======================== ===================
User F2FS Block
----- ---- -----
+===================== ======================== ===================
META WRITE_LIFE_MEDIUM;
HOT_NODE WRITE_LIFE_NOT_SET
WARM_NODE "
@@ -662,6 +690,7 @@ WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
+===================== ======================== ===================
Fallocate(2) Policy
-------------------
@@ -681,6 +710,7 @@ Allocating disk space
However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to
fallocate(fd, DEFAULT_MODE), it allocates on-disk blocks addressess having
zero or random data, which is useful to the below scenario where:
+
1. create(fd)
2. ioctl(fd, F2FS_IOC_SET_PIN_FILE)
3. fallocate(fd, 0, 0, size)
@@ -692,39 +722,41 @@ Compression implementation
--------------------------
- New term named cluster is defined as basic unit of compression, file can
-be divided into multiple clusters logically. One cluster includes 4 << n
-(n >= 0) logical pages, compression size is also cluster size, each of
-cluster can be compressed or not.
+ be divided into multiple clusters logically. One cluster includes 4 << n
+ (n >= 0) logical pages, compression size is also cluster size, each of
+ cluster can be compressed or not.
- In cluster metadata layout, one special block address is used to indicate
-cluster is compressed one or normal one, for compressed cluster, following
-metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs
-stores data including compress header and compressed data.
+ cluster is compressed one or normal one, for compressed cluster, following
+ metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs
+ stores data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
-support compression on write-once file, data can be compressed only when
-all logical blocks in file are valid and cluster compress ratio is lower
-than specified threshold.
+ support compression on write-once file, data can be compressed only when
+ all logical blocks in file are valid and cluster compress ratio is lower
+ than specified threshold.
- To enable compression on regular inode, there are three ways:
-* chattr +c file
-* chattr +c dir; touch dir/file
-* mount w/ -o compress_extension=ext; touch file.ext
-Compress metadata layout:
- [Dnode Structure]
- +-----------------------------------------------+
- | cluster 1 | cluster 2 | ......... | cluster N |
- +-----------------------------------------------+
- . . . .
- . . . .
- . Compressed Cluster . . Normal Cluster .
-+----------+---------+---------+---------+ +---------+---------+---------+---------+
-|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
-+----------+---------+---------+---------+ +---------+---------+---------+---------+
- . .
- . .
- . .
- +-------------+-------------+----------+----------------------------+
- | data length | data chksum | reserved | compressed data |
- +-------------+-------------+----------+----------------------------+
+ * chattr +c file
+ * chattr +c dir; touch dir/file
+ * mount w/ -o compress_extension=ext; touch file.ext
+
+Compress metadata layout::
+
+ [Dnode Structure]
+ +-----------------------------------------------+
+ | cluster 1 | cluster 2 | ......... | cluster N |
+ +-----------------------------------------------+
+ . . . .
+ . . . .
+ . Compressed Cluster . . Normal Cluster .
+ +----------+---------+---------+---------+ +---------+---------+---------+---------+
+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+ +----------+---------+---------+---------+ +---------+---------+---------+---------+
+ . .
+ . .
+ . .
+ +-------------+-------------+----------+----------------------------+
+ | data length | data chksum | reserved | compressed data |
+ +-------------+-------------+----------+----------------------------+
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index aa2c3d1de3de..f69d20406be0 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -64,6 +64,7 @@ Documentation for filesystem implementations.
erofs
ext2
ext3
+ f2fs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [f2fs-dev] [PATCH 18/44] docs: filesystems: convert f2fs.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Jonathan Corbet, Mauro Carvalho Chehab, linux-f2fs-devel,
linux-fsdevel, Jaegeuk Kim
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{f2fs.txt => f2fs.rst} | 252 ++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 143 insertions(+), 110 deletions(-)
rename Documentation/filesystems/{f2fs.txt => f2fs.rst} (84%)
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.rst
similarity index 84%
rename from Documentation/filesystems/f2fs.txt
rename to Documentation/filesystems/f2fs.rst
index 4eb3e2ddd00e..d681203728d7 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.rst
@@ -1,6 +1,8 @@
-================================================================================
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
WHAT IS Flash-Friendly File System (F2FS)?
-================================================================================
+==========================================
NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have
been equipped on a variety systems ranging from mobile to server systems. Since
@@ -20,14 +22,15 @@ layout, but also for selecting allocation and cleaning algorithms.
The following git tree provides the file system formatting tool (mkfs.f2fs),
a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs).
->> git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
For reporting bugs and sending patches, please use the following mailing list:
->> linux-f2fs-devel@lists.sourceforge.net
-================================================================================
-BACKGROUND AND DESIGN ISSUES
-================================================================================
+- linux-f2fs-devel@lists.sourceforge.net
+
+Background and Design issues
+============================
Log-structured File System (LFS)
--------------------------------
@@ -61,6 +64,7 @@ needs to reclaim these obsolete blocks seamlessly to users. This job is called
as a cleaning process.
The process consists of three operations as follows.
+
1. A victim segment is selected through referencing segment usage table.
2. It loads parent index structures of all the data in the victim identified by
segment summary blocks.
@@ -71,9 +75,8 @@ This cleaning job may cause unexpected long delays, so the most important goal
is to hide the latencies to users. And also definitely, it should reduce the
amount of valid data to be moved, and move them quickly as well.
-================================================================================
-KEY FEATURES
-================================================================================
+Key Features
+============
Flash Awareness
---------------
@@ -94,10 +97,11 @@ Cleaning Overhead
- Support multi-head logs for static/dynamic hot and cold data separation
- Introduce adaptive logging for efficient block allocation
-================================================================================
-MOUNT OPTIONS
-================================================================================
+Mount Options
+=============
+
+====================== ============================================================
background_gc=%s Turn on/off cleaning operations, namely garbage
collection, triggered in background when I/O subsystem is
idle. If background_gc=on, it will turn on the garbage
@@ -167,7 +171,10 @@ fault_injection=%d Enable fault injection in all supported types with
fault_type=%d Support configuring fault injection type, should be
enabled with fault_injection option, fault type value
is shown below, it supports single or combined type.
+
+ =================== ===========
Type_Name Type_Value
+ =================== ===========
FAULT_KMALLOC 0x000000001
FAULT_KVMALLOC 0x000000002
FAULT_PAGE_ALLOC 0x000000004
@@ -183,6 +190,7 @@ fault_type=%d Support configuring fault injection type, should be
FAULT_CHECKPOINT 0x000001000
FAULT_DISCARD 0x000002000
FAULT_WRITE_IO 0x000004000
+ =================== ===========
mode=%s Control block allocation mode which supports "adaptive"
and "lfs". In "lfs" mode, there should be no random
writes towards main area.
@@ -219,7 +227,7 @@ fsync_mode=%s Control the policy of fsync. Currently supports "posix",
non-atomic files likewise "nobarrier" mount option.
test_dummy_encryption Enable dummy encryption, which provides a fake fscrypt
context. The fake fscrypt context is used by xfstests.
-checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
+checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
to reenable checkpointing. Is enabled by default. While
disabled, any unmounting or unexpected shutdowns will cause
the filesystem contents to appear as they did when the
@@ -246,22 +254,22 @@ compress_extension=%s Support adding specified extension, so that f2fs can enab
on compression extension list and enable compression on
these file by default rather than to enable it via ioctl.
For other files, we can still enable compression via ioctl.
+====================== ============================================================
-================================================================================
-DEBUGFS ENTRIES
-================================================================================
+Debugfs Entries
+===============
/sys/kernel/debug/f2fs/ contains information about all the partitions mounted as
f2fs. Each file shows the whole f2fs information.
/sys/kernel/debug/f2fs/status includes:
+
- major file system information managed by f2fs currently
- average SIT information about whole segments
- current memory footprint consumed by f2fs.
-================================================================================
-SYSFS ENTRIES
-================================================================================
+Sysfs Entries
+=============
Information about mounted f2fs file systems can be found in
/sys/fs/f2fs. Each mounted filesystem will have a directory in
@@ -271,22 +279,24 @@ The files in each per-device directory are shown in table below.
Files in /sys/fs/f2fs/<devname>
(see also Documentation/ABI/testing/sysfs-fs-f2fs)
-================================================================================
-USAGE
-================================================================================
+Usage
+=====
1. Download userland tools and compile them.
2. Skip, if f2fs was compiled statically inside kernel.
- Otherwise, insert the f2fs.ko module.
- # insmod f2fs.ko
+ Otherwise, insert the f2fs.ko module::
-3. Create a directory trying to mount
- # mkdir /mnt/f2fs
+ # insmod f2fs.ko
-4. Format the block device, and then mount as f2fs
- # mkfs.f2fs -l label /dev/block_device
- # mount -t f2fs /dev/block_device /mnt/f2fs
+3. Create a directory trying to mount::
+
+ # mkdir /mnt/f2fs
+
+4. Format the block device, and then mount as f2fs::
+
+ # mkfs.f2fs -l label /dev/block_device
+ # mount -t f2fs /dev/block_device /mnt/f2fs
mkfs.f2fs
---------
@@ -294,18 +304,26 @@ The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem,
which builds a basic on-disk layout.
The options consist of:
--l [label] : Give a volume label, up to 512 unicode name.
--a [0 or 1] : Split start location of each area for heap-based allocation.
- 1 is set by default, which performs this.
--o [int] : Set overprovision ratio in percent over volume size.
- 5 is set by default.
--s [int] : Set the number of segments per section.
- 1 is set by default.
--z [int] : Set the number of sections per zone.
- 1 is set by default.
--e [str] : Set basic extension list. e.g. "mp3,gif,mov"
--t [0 or 1] : Disable discard command or not.
- 1 is set by default, which conducts discard.
+
+=============== ===========================================================
+``-l [label]`` Give a volume label, up to 512 unicode name.
+``-a [0 or 1]`` Split start location of each area for heap-based allocation.
+
+ 1 is set by default, which performs this.
+``-o [int]`` Set overprovision ratio in percent over volume size.
+
+ 5 is set by default.
+``-s [int]`` Set the number of segments per section.
+
+ 1 is set by default.
+``-z [int]`` Set the number of sections per zone.
+
+ 1 is set by default.
+``-e [str]`` Set basic extension list. e.g. "mp3,gif,mov"
+``-t [0 or 1]`` Disable discard command or not.
+
+ 1 is set by default, which conducts discard.
+=============== ===========================================================
fsck.f2fs
---------
@@ -314,7 +332,8 @@ partition, which examines whether the filesystem metadata and user-made data
are cross-referenced correctly or not.
Note that, initial version of the tool does not fix any inconsistency.
-The options consist of:
+The options consist of::
+
-d debug level [default:0]
dump.f2fs
@@ -327,20 +346,21 @@ It shows on-disk inode information recognized by a given inode number, and is
able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and
./dump_sit respectively.
-The options consist of:
+The options consist of::
+
-d debug level [default:0]
-i inode no (hex)
-s [SIT dump segno from #1~#2 (decimal), for all 0~-1]
-a [SSA dump segno from #1~#2 (decimal), for all 0~-1]
-Examples:
-# dump.f2fs -i [ino] /dev/sdx
-# dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
-# dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
+Examples::
-================================================================================
-DESIGN
-================================================================================
+ # dump.f2fs -i [ino] /dev/sdx
+ # dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
+ # dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
+
+Design
+======
On-disk Layout
--------------
@@ -351,7 +371,7 @@ consists of a set of sections. By default, section and zone sizes are set to one
segment size identically, but users can easily modify the sizes by mkfs.
F2FS splits the entire volume into six areas, and all the areas except superblock
-consists of multiple segments as described below.
+consists of multiple segments as described below::
align with the zone size <-|
|-> align with the segment size
@@ -373,28 +393,28 @@ consists of multiple segments as described below.
|__zone__|
- Superblock (SB)
- : It is located at the beginning of the partition, and there exist two copies
+ It is located at the beginning of the partition, and there exist two copies
to avoid file system crash. It contains basic partition information and some
default parameters of f2fs.
- Checkpoint (CP)
- : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
+ It contains file system information, bitmaps for valid NAT/SIT sets, orphan
inode lists, and summary entries of current active segments.
- Segment Information Table (SIT)
- : It contains segment information such as valid block count and bitmap for the
+ It contains segment information such as valid block count and bitmap for the
validity of all the blocks.
- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
+ It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Summary Area (SSA)
- : It contains summary entries which contains the owner information of all the
+ It contains summary entries which contains the owner information of all the
data and node blocks stored in Main area.
- Main Area
- : It contains file and directory data including their indices.
+ It contains file and directory data including their indices.
In order to avoid misalignment between file system and flash-based storage, F2FS
aligns the start block address of CP with the segment size. Also, it aligns the
@@ -414,7 +434,7 @@ One of them always indicates the last valid data, which is called as shadow copy
mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism.
For file system consistency, each CP points to which NAT and SIT copies are
-valid, as shown as below.
+valid, as shown as below::
+--------+----------+---------+
| CP | SIT | NAT |
@@ -438,7 +458,7 @@ indirect node. F2FS assigns 4KB to an inode block which contains 923 data block
indices, two direct node pointers, two indirect node pointers, and one double
indirect node pointer as described below. One direct node block contains 1018
data blocks, and one indirect node block contains also 1018 node blocks. Thus,
-one inode block (i.e., a file) covers:
+one inode block (i.e., a file) covers::
4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB.
@@ -473,6 +493,8 @@ A dentry block consists of 214 dentry slots and file names. Therein a bitmap is
used to represent whether each dentry is valid or not. A dentry block occupies
4KB with the following composition.
+::
+
Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) +
dentries(11 * 214 bytes) + file name (8 * 214 bytes)
@@ -498,23 +520,25 @@ F2FS implements multi-level hash tables for directory structure. Each level has
a hash table with dedicated number of hash buckets as shown below. Note that
"A(2B)" means a bucket includes 2 data blocks.
-----------------------
-A : bucket
-B : block
-N : MAX_DIR_HASH_DEPTH
-----------------------
+::
-level #0 | A(2B)
- |
-level #1 | A(2B) - A(2B)
- |
-level #2 | A(2B) - A(2B) - A(2B) - A(2B)
- . | . . . .
-level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
- . | . . . .
-level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
+ ----------------------
+ A : bucket
+ B : block
+ N : MAX_DIR_HASH_DEPTH
+ ----------------------
-The number of blocks and buckets are determined by,
+ level #0 | A(2B)
+ |
+ level #1 | A(2B) - A(2B)
+ |
+ level #2 | A(2B) - A(2B) - A(2B) - A(2B)
+ . | . . . .
+ level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
+ . | . . . .
+ level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
+
+The number of blocks and buckets are determined by::
,- 2, if n < MAX_DIR_HASH_DEPTH / 2,
# of blocks in level #n = |
@@ -532,7 +556,7 @@ dentry consisting of the file name and its inode number. If not found, F2FS
scans the next hash table in level #1. In this way, F2FS scans hash tables in
each levels incrementally from 1 to N. In each levels F2FS needs to scan only
one bucket determined by the following equation, which shows O(log(# of files))
-complexity.
+complexity::
bucket number to scan in level #n = (hash value) % (# of buckets in level #n)
@@ -540,7 +564,8 @@ In the case of file creation, F2FS finds empty consecutive slots that cover the
file name. F2FS searches the empty slots in the hash tables of whole levels from
1 to N in the same way as the lookup operation.
-The following figure shows an example of two cases holding children.
+The following figure shows an example of two cases holding children::
+
--------------> Dir <--------------
| |
child child
@@ -611,14 +636,15 @@ Write-hint Policy
2) whint_mode=user-based. F2FS tries to pass down hints given by
users.
+===================== ======================== ===================
User F2FS Block
----- ---- -----
+===================== ======================== ===================
META WRITE_LIFE_NOT_SET
HOT_NODE "
WARM_NODE "
COLD_NODE "
-*ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
-*extension list " "
+ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
+extension list " "
-- buffered io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
@@ -635,11 +661,13 @@ WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
+===================== ======================== ===================
3) whint_mode=fs-based. F2FS passes down hints with its policy.
+===================== ======================== ===================
User F2FS Block
----- ---- -----
+===================== ======================== ===================
META WRITE_LIFE_MEDIUM;
HOT_NODE WRITE_LIFE_NOT_SET
WARM_NODE "
@@ -662,6 +690,7 @@ WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
+===================== ======================== ===================
Fallocate(2) Policy
-------------------
@@ -681,6 +710,7 @@ Allocating disk space
However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to
fallocate(fd, DEFAULT_MODE), it allocates on-disk blocks addressess having
zero or random data, which is useful to the below scenario where:
+
1. create(fd)
2. ioctl(fd, F2FS_IOC_SET_PIN_FILE)
3. fallocate(fd, 0, 0, size)
@@ -692,39 +722,41 @@ Compression implementation
--------------------------
- New term named cluster is defined as basic unit of compression, file can
-be divided into multiple clusters logically. One cluster includes 4 << n
-(n >= 0) logical pages, compression size is also cluster size, each of
-cluster can be compressed or not.
+ be divided into multiple clusters logically. One cluster includes 4 << n
+ (n >= 0) logical pages, compression size is also cluster size, each of
+ cluster can be compressed or not.
- In cluster metadata layout, one special block address is used to indicate
-cluster is compressed one or normal one, for compressed cluster, following
-metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs
-stores data including compress header and compressed data.
+ cluster is compressed one or normal one, for compressed cluster, following
+ metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs
+ stores data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
-support compression on write-once file, data can be compressed only when
-all logical blocks in file are valid and cluster compress ratio is lower
-than specified threshold.
+ support compression on write-once file, data can be compressed only when
+ all logical blocks in file are valid and cluster compress ratio is lower
+ than specified threshold.
- To enable compression on regular inode, there are three ways:
-* chattr +c file
-* chattr +c dir; touch dir/file
-* mount w/ -o compress_extension=ext; touch file.ext
-Compress metadata layout:
- [Dnode Structure]
- +-----------------------------------------------+
- | cluster 1 | cluster 2 | ......... | cluster N |
- +-----------------------------------------------+
- . . . .
- . . . .
- . Compressed Cluster . . Normal Cluster .
-+----------+---------+---------+---------+ +---------+---------+---------+---------+
-|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
-+----------+---------+---------+---------+ +---------+---------+---------+---------+
- . .
- . .
- . .
- +-------------+-------------+----------+----------------------------+
- | data length | data chksum | reserved | compressed data |
- +-------------+-------------+----------+----------------------------+
+ * chattr +c file
+ * chattr +c dir; touch dir/file
+ * mount w/ -o compress_extension=ext; touch file.ext
+
+Compress metadata layout::
+
+ [Dnode Structure]
+ +-----------------------------------------------+
+ | cluster 1 | cluster 2 | ......... | cluster N |
+ +-----------------------------------------------+
+ . . . .
+ . . . .
+ . Compressed Cluster . . Normal Cluster .
+ +----------+---------+---------+---------+ +---------+---------+---------+---------+
+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+ +----------+---------+---------+---------+ +---------+---------+---------+---------+
+ . .
+ . .
+ . .
+ +-------------+-------------+----------+----------------------------+
+ | data length | data chksum | reserved | compressed data |
+ +-------------+-------------+----------+----------------------------+
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index aa2c3d1de3de..f69d20406be0 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -64,6 +64,7 @@ Documentation for filesystem implementations.
erofs
ext2
ext3
+ f2fs
fuse
overlayfs
virtiofs
--
2.24.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply related [flat|nested] 112+ messages in thread
* [PATCH 19/44] docs: filesystems: convert gfs2.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Bob Peterson, Andreas Gruenbacher, cluster-devel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +++++++++++++------
Documentation/filesystems/index.rst | 1 +
2 files changed, 15 insertions(+), 6 deletions(-)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.rst
similarity index 76%
rename from Documentation/filesystems/gfs2.txt
rename to Documentation/filesystems/gfs2.rst
index cc4f2306609e..8d1ab589ce18 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
Global File System
-------------------
+==================
https://fedorahosted.org/cluster/wiki/HomePage
@@ -14,16 +17,18 @@ on one machine show up immediately on all other machines in the cluster.
GFS uses interchangeable inter-node locking mechanisms, the currently
supported mechanisms are:
- lock_nolock -- allows gfs to be used as a local file system
+ lock_nolock
+ - allows gfs to be used as a local file system
- lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
- The dlm is found at linux/fs/dlm/
+ lock_dlm
+ - uses a distributed lock manager (dlm) for inter-node locking.
+ The dlm is found at linux/fs/dlm/
Lock_dlm depends on user space cluster management systems found
at the URL above.
To use gfs as a local file system, no external clustering systems are
-needed, simply:
+needed, simply::
$ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
$ mount -t gfs2 /dev/block_device /dir
@@ -37,9 +42,12 @@ GFS2 is not on-disk compatible with previous versions of GFS, but it
is pretty close.
The following man pages can be found at the URL above:
+
+ ============ =============================================
fsck.gfs2 to repair a filesystem
gfs2_grow to expand a filesystem online
gfs2_jadd to add journals to a filesystem online
tunegfs2 to manipulate, examine and tune a filesystem
- gfs2_convert to convert a gfs filesystem to gfs2 in-place
+ gfs2_convert to convert a gfs filesystem to gfs2 in-place
mkfs.gfs2 to make a filesystem
+ ============ =============================================
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f69d20406be0..f24befe78326 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -65,6 +65,7 @@ Documentation for filesystem implementations.
ext2
ext3
f2fs
+ gfs2
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 19/44] docs: filesystems: convert gfs2.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: cluster-devel.redhat.com
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{gfs2.txt => gfs2.rst} | 20 +++++++++++++------
Documentation/filesystems/index.rst | 1 +
2 files changed, 15 insertions(+), 6 deletions(-)
rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.rst
similarity index 76%
rename from Documentation/filesystems/gfs2.txt
rename to Documentation/filesystems/gfs2.rst
index cc4f2306609e..8d1ab589ce18 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
Global File System
-------------------
+==================
https://fedorahosted.org/cluster/wiki/HomePage
@@ -14,16 +17,18 @@ on one machine show up immediately on all other machines in the cluster.
GFS uses interchangeable inter-node locking mechanisms, the currently
supported mechanisms are:
- lock_nolock -- allows gfs to be used as a local file system
+ lock_nolock
+ - allows gfs to be used as a local file system
- lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
- The dlm is found at linux/fs/dlm/
+ lock_dlm
+ - uses a distributed lock manager (dlm) for inter-node locking.
+ The dlm is found at linux/fs/dlm/
Lock_dlm depends on user space cluster management systems found
at the URL above.
To use gfs as a local file system, no external clustering systems are
-needed, simply:
+needed, simply::
$ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
$ mount -t gfs2 /dev/block_device /dir
@@ -37,9 +42,12 @@ GFS2 is not on-disk compatible with previous versions of GFS, but it
is pretty close.
The following man pages can be found at the URL above:
+
+ ============ =============================================
fsck.gfs2 to repair a filesystem
gfs2_grow to expand a filesystem online
gfs2_jadd to add journals to a filesystem online
tunegfs2 to manipulate, examine and tune a filesystem
- gfs2_convert to convert a gfs filesystem to gfs2 in-place
+ gfs2_convert to convert a gfs filesystem to gfs2 in-place
mkfs.gfs2 to make a filesystem
+ ============ =============================================
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f69d20406be0..f24befe78326 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -65,6 +65,7 @@ Documentation for filesystem implementations.
ext2
ext3
f2fs
+ gfs2
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 19/44] docs: filesystems: convert gfs2.txt to ReST
2020-02-17 16:12 ` [Cluster-devel] " Mauro Carvalho Chehab
@ 2020-02-18 13:13 ` Bob Peterson
-1 siblings, 0 replies; 112+ messages in thread
From: Bob Peterson @ 2020-02-18 13:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Andreas Gruenbacher, cluster-devel
----- Original Message -----
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../filesystems/{gfs2.txt => gfs2.rst} | 20 +++++++++++++------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 15 insertions(+), 6 deletions(-)
> rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
Looks good.
Acked-by: Bob Peterson <rpeterso@redhat.com>
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 19/44] docs: filesystems: convert gfs2.txt to ReST
@ 2020-02-18 13:13 ` Bob Peterson
0 siblings, 0 replies; 112+ messages in thread
From: Bob Peterson @ 2020-02-18 13:13 UTC (permalink / raw)
To: cluster-devel.redhat.com
----- Original Message -----
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add table markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../filesystems/{gfs2.txt => gfs2.rst} | 20 +++++++++++++------
> Documentation/filesystems/index.rst | 1 +
> 2 files changed, 15 insertions(+), 6 deletions(-)
> rename Documentation/filesystems/{gfs2.txt => gfs2.rst} (76%)
Looks good.
Acked-by: Bob Peterson <rpeterso@redhat.com>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 20/44] docs: filesystems: convert gfs2-uevents.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Bob Peterson, Andreas Gruenbacher, cluster-devel
This document is almost in ReST format: all it needs is to have
the titles adjusted and add a SPDX header. In other words:
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +++++++++++++++----
Documentation/filesystems/index.rst | 1 +
2 files changed, 17 insertions(+), 4 deletions(-)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.rst
similarity index 94%
rename from Documentation/filesystems/gfs2-uevents.txt
rename to Documentation/filesystems/gfs2-uevents.rst
index 19a19ebebc34..f162a2c76c69 100644
--- a/Documentation/filesystems/gfs2-uevents.txt
+++ b/Documentation/filesystems/gfs2-uevents.rst
@@ -1,14 +1,18 @@
- uevents and GFS2
- ==================
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+uevents and GFS2
+================
During the lifetime of a GFS2 mount, a number of uevents are generated.
This document explains what the events are and what they are used
for (by gfs_controld in gfs2-utils).
A list of GFS2 uevents
------------------------
+======================
1. ADD
+------
The ADD event occurs at mount time. It will always be the first
uevent generated by the newly created filesystem. If the mount
@@ -21,6 +25,7 @@ with no journal assigned), and read-only (with journal assigned) status
of the filesystem respectively.
2. ONLINE
+---------
The ONLINE uevent is generated after a successful mount or remount. It
has the same environment variables as the ADD uevent. The ONLINE
@@ -29,6 +34,7 @@ RDONLY are a relatively recent addition (2.6.32-rc+) and will not
be generated by older kernels.
3. CHANGE
+---------
The CHANGE uevent is used in two places. One is when reporting the
successful mount of the filesystem by the first node (FIRSTMOUNT=Done).
@@ -52,6 +58,7 @@ cluster. For this reason the ONLINE uevent was used when adding a new
uevent for a successful mount or remount.
4. OFFLINE
+----------
The OFFLINE uevent is only generated due to filesystem errors and is used
as part of the "withdraw" mechanism. Currently this doesn't give any
@@ -59,6 +66,7 @@ information about what the error is, which is something that needs to
be fixed.
5. REMOVE
+---------
The REMOVE uevent is generated at the end of an unsuccessful mount
or at the end of a umount of the filesystem. All REMOVE uevents will
@@ -68,9 +76,10 @@ kobject subsystem.
Information common to all GFS2 uevents (uevent environment variables)
-----------------------------------------------------------------------
+=====================================================================
1. LOCKTABLE=
+--------------
The LOCKTABLE is a string, as supplied on the mount command
line (locktable=) or via fstab. It is used as a filesystem label
@@ -78,6 +87,7 @@ as well as providing the information for a lock_dlm mount to be
able to join the cluster.
2. LOCKPROTO=
+-------------
The LOCKPROTO is a string, and its value depends on what is set
on the mount command line, or via fstab. It will be either
@@ -85,12 +95,14 @@ lock_nolock or lock_dlm. In the future other lock managers
may be supported.
3. JOURNALID=
+-------------
If a journal is in use by the filesystem (journals are not
assigned for spectator mounts) then this will give the
numeric journal id in all GFS2 uevents.
4. UUID=
+--------
With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID
into the filesystem superblock. If it exists, this will
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f24befe78326..c16e517e37c5 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -66,6 +66,7 @@ Documentation for filesystem implementations.
ext3
f2fs
gfs2
+ gfs2-uevents
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 20/44] docs: filesystems: convert gfs2-uevents.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: cluster-devel.redhat.com
This document is almost in ReST format: all it needs is to have
the titles adjusted and add a SPDX header. In other words:
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../{gfs2-uevents.txt => gfs2-uevents.rst} | 20 +++++++++++++++----
Documentation/filesystems/index.rst | 1 +
2 files changed, 17 insertions(+), 4 deletions(-)
rename Documentation/filesystems/{gfs2-uevents.txt => gfs2-uevents.rst} (94%)
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.rst
similarity index 94%
rename from Documentation/filesystems/gfs2-uevents.txt
rename to Documentation/filesystems/gfs2-uevents.rst
index 19a19ebebc34..f162a2c76c69 100644
--- a/Documentation/filesystems/gfs2-uevents.txt
+++ b/Documentation/filesystems/gfs2-uevents.rst
@@ -1,14 +1,18 @@
- uevents and GFS2
- ==================
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+uevents and GFS2
+================
During the lifetime of a GFS2 mount, a number of uevents are generated.
This document explains what the events are and what they are used
for (by gfs_controld in gfs2-utils).
A list of GFS2 uevents
------------------------
+======================
1. ADD
+------
The ADD event occurs at mount time. It will always be the first
uevent generated by the newly created filesystem. If the mount
@@ -21,6 +25,7 @@ with no journal assigned), and read-only (with journal assigned) status
of the filesystem respectively.
2. ONLINE
+---------
The ONLINE uevent is generated after a successful mount or remount. It
has the same environment variables as the ADD uevent. The ONLINE
@@ -29,6 +34,7 @@ RDONLY are a relatively recent addition (2.6.32-rc+) and will not
be generated by older kernels.
3. CHANGE
+---------
The CHANGE uevent is used in two places. One is when reporting the
successful mount of the filesystem by the first node (FIRSTMOUNT=Done).
@@ -52,6 +58,7 @@ cluster. For this reason the ONLINE uevent was used when adding a new
uevent for a successful mount or remount.
4. OFFLINE
+----------
The OFFLINE uevent is only generated due to filesystem errors and is used
as part of the "withdraw" mechanism. Currently this doesn't give any
@@ -59,6 +66,7 @@ information about what the error is, which is something that needs to
be fixed.
5. REMOVE
+---------
The REMOVE uevent is generated at the end of an unsuccessful mount
or at the end of a umount of the filesystem. All REMOVE uevents will
@@ -68,9 +76,10 @@ kobject subsystem.
Information common to all GFS2 uevents (uevent environment variables)
-----------------------------------------------------------------------
+=====================================================================
1. LOCKTABLE=
+--------------
The LOCKTABLE is a string, as supplied on the mount command
line (locktable=) or via fstab. It is used as a filesystem label
@@ -78,6 +87,7 @@ as well as providing the information for a lock_dlm mount to be
able to join the cluster.
2. LOCKPROTO=
+-------------
The LOCKPROTO is a string, and its value depends on what is set
on the mount command line, or via fstab. It will be either
@@ -85,12 +95,14 @@ lock_nolock or lock_dlm. In the future other lock managers
may be supported.
3. JOURNALID=
+-------------
If a journal is in use by the filesystem (journals are not
assigned for spectator mounts) then this will give the
numeric journal id in all GFS2 uevents.
4. UUID=
+--------
With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID
into the filesystem superblock. If it exists, this will
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f24befe78326..c16e517e37c5 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -66,6 +66,7 @@ Documentation for filesystem implementations.
ext3
f2fs
gfs2
+ gfs2-uevents
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 20/44] docs: filesystems: convert gfs2-uevents.txt to ReST
2020-02-17 16:12 ` [Cluster-devel] " Mauro Carvalho Chehab
@ 2020-02-18 13:13 ` Bob Peterson
-1 siblings, 0 replies; 112+ messages in thread
From: Bob Peterson @ 2020-02-18 13:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Andreas Gruenbacher, cluster-devel
----- Original Message -----
> This document is almost in ReST format: all it needs is to have
> the titles adjusted and add a SPDX header. In other words:
>
> - Add a SPDX header;
> - Add a document title;
> - Adjust section titles;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Both patches re: gfs2 look good.
Acked-by: Bob Peterson <rpeterso@redhat.com>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Cluster-devel] [PATCH 20/44] docs: filesystems: convert gfs2-uevents.txt to ReST
@ 2020-02-18 13:13 ` Bob Peterson
0 siblings, 0 replies; 112+ messages in thread
From: Bob Peterson @ 2020-02-18 13:13 UTC (permalink / raw)
To: cluster-devel.redhat.com
----- Original Message -----
> This document is almost in ReST format: all it needs is to have
> the titles adjusted and add a SPDX header. In other words:
>
> - Add a SPDX header;
> - Add a document title;
> - Adjust section titles;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Both patches re: gfs2 look good.
Acked-by: Bob Peterson <rpeterso@redhat.com>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 21/44] docs: filesystems: convert hfsplus.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (24 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
Just trivial changes:
- Add a SPDX header;
- Add it to filesystems/index.rst.
While here, adjust document title, just to make it use the same
style of the other docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/{hfsplus.txt => hfsplus.rst} | 2 ++
Documentation/filesystems/index.rst | 1 +
2 files changed, 3 insertions(+)
rename Documentation/filesystems/{hfsplus.txt => hfsplus.rst} (95%)
diff --git a/Documentation/filesystems/hfsplus.txt b/Documentation/filesystems/hfsplus.rst
similarity index 95%
rename from Documentation/filesystems/hfsplus.txt
rename to Documentation/filesystems/hfsplus.rst
index 59f7569fc9ed..f02f4f5fc020 100644
--- a/Documentation/filesystems/hfsplus.txt
+++ b/Documentation/filesystems/hfsplus.rst
@@ -1,4 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+======================================
Macintosh HFSPlus Filesystem for Linux
======================================
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index c16e517e37c5..c351bc8a8c85 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -67,6 +67,7 @@ Documentation for filesystem implementations.
f2fs
gfs2
gfs2-uevents
+ hfsplus
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 22/44] docs: filesystems: convert hfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (25 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Adjust document and section titles;
- Use notes markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{hfs.txt => hfs.rst} | 23 +++++++++++--------
Documentation/filesystems/index.rst | 1 +
2 files changed, 15 insertions(+), 9 deletions(-)
rename Documentation/filesystems/{hfs.txt => hfs.rst} (80%)
diff --git a/Documentation/filesystems/hfs.txt b/Documentation/filesystems/hfs.rst
similarity index 80%
rename from Documentation/filesystems/hfs.txt
rename to Documentation/filesystems/hfs.rst
index d096df6db07a..ab17a005e9b1 100644
--- a/Documentation/filesystems/hfs.txt
+++ b/Documentation/filesystems/hfs.rst
@@ -1,11 +1,16 @@
-Note: This filesystem doesn't have a maintainer.
+.. SPDX-License-Identifier: GPL-2.0
+==================================
Macintosh HFS Filesystem for Linux
==================================
-HFS stands for ``Hierarchical File System'' and is the filesystem used
+
+.. Note:: This filesystem doesn't have a maintainer.
+
+
+HFS stands for ``Hierarchical File System`` and is the filesystem used
by the Mac Plus and all later Macintosh models. Earlier Macintosh
-models used MFS (``Macintosh File System''), which is not supported,
+models used MFS (``Macintosh File System``), which is not supported,
MacOS 8.1 and newer support a filesystem called HFS+ that's similar to
HFS but is extended in various areas. Use the hfsplus filesystem driver
to access such filesystems from Linux.
@@ -49,25 +54,25 @@ Writing to HFS Filesystems
HFS is not a UNIX filesystem, thus it does not have the usual features you'd
expect:
- o You can't modify the set-uid, set-gid, sticky or executable bits or the uid
+ * You can't modify the set-uid, set-gid, sticky or executable bits or the uid
and gid of files.
- o You can't create hard- or symlinks, device files, sockets or FIFOs.
+ * You can't create hard- or symlinks, device files, sockets or FIFOs.
HFS does on the other have the concepts of multiple forks per file. These
non-standard forks are represented as hidden additional files in the normal
filesystems namespace which is kind of a cludge and makes the semantics for
the a little strange:
- o You can't create, delete or rename resource forks of files or the
+ * You can't create, delete or rename resource forks of files or the
Finder's metadata.
- o They are however created (with default values), deleted and renamed
+ * They are however created (with default values), deleted and renamed
along with the corresponding data fork or directory.
- o Copying files to a different filesystem will loose those attributes
+ * Copying files to a different filesystem will loose those attributes
that are essential for MacOS to work.
Creating HFS filesystems
-===================================
+========================
The hfsutils package from Robert Leslie contains a program called
hformat that can be used to create HFS filesystem. See
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index c351bc8a8c85..f776411340cb 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -67,6 +67,7 @@ Documentation for filesystem implementations.
f2fs
gfs2
gfs2-uevents
+ hfs
hfsplus
fuse
overlayfs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 23/44] docs: filesystems: convert hpfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (26 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../filesystems/{hpfs.txt => hpfs.rst} | 239 +++++++++++-------
Documentation/filesystems/index.rst | 1 +
2 files changed, 149 insertions(+), 91 deletions(-)
rename Documentation/filesystems/{hpfs.txt => hpfs.rst} (66%)
diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.rst
similarity index 66%
rename from Documentation/filesystems/hpfs.txt
rename to Documentation/filesystems/hpfs.rst
index 74630bd504fb..0db152278572 100644
--- a/Documentation/filesystems/hpfs.txt
+++ b/Documentation/filesystems/hpfs.rst
@@ -1,13 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
Read/Write HPFS 2.09
+====================
+
1998-2004, Mikulas Patocka
-email: mikulas@artax.karlin.mff.cuni.cz
-homepage: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
+:email: mikulas@artax.karlin.mff.cuni.cz
+:homepage: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
-CREDITS:
+Credits
+=======
Chris Smith, 1993, original read-only HPFS, some code and hpfs structures file
is taken from it
+
Jacques Gelinas, MSDos mmap, Inspired by fs/nfs/mmap.c (Jon Tombs 15 Aug 1993)
+
Werner Almesberger, 1992, 1993, MSDos option parser & CR/LF conversion
Mount options
@@ -50,6 +58,7 @@ timeshift=(-)nnn (default 0)
File names
+==========
As in OS/2, filenames are case insensitive. However, shell thinks that names
are case sensitive, so for example when you create a file FOO, you can use
@@ -64,6 +73,7 @@ access it under names 'a.', 'a..', 'a . . . ' etc.
Extended attributes
+===================
On HPFS partitions, OS/2 can associate to each file a special information called
extended attributes. Extended attributes are pairs of (key,value) where key is
@@ -88,6 +98,7 @@ values doesn't work.
Symlinks
+========
You can do symlinks on HPFS partition, symlinks are achieved by setting extended
attribute named "SYMLINK" with symlink value. Like on ext2, you can chown and
@@ -101,6 +112,7 @@ to analyze or change OS2SYS.INI.
Codepages
+=========
HPFS can contain several uppercasing tables for several codepages and each
file has a pointer to codepage its name is in. However OS/2 was created in
@@ -128,6 +140,7 @@ this codepage - if you don't try to do what I described above :-)
Known bugs
+==========
HPFS386 on OS/2 server is not supported. HPFS386 installed on normal OS/2 client
should work. If you have OS/2 server, use only read-only mode. I don't know how
@@ -152,7 +165,8 @@ would result in directory tree splitting, that takes disk space. Workaround is
to delete other files that are leaf (probability that the file is non-leaf is
about 1/50) or to truncate file first to make some space.
You encounter this problem only if you have many directories so that
-preallocated directory band is full i.e.
+preallocated directory band is full i.e.::
+
number_of_directories / size_of_filesystem_in_mb > 4.
You can't delete open directories.
@@ -174,6 +188,7 @@ anybody know what does it mean?
What does "unbalanced tree" message mean?
+=========================================
Old versions of this driver created sometimes unbalanced dnode trees. OS/2
chkdsk doesn't scream if the tree is unbalanced (and sometimes creates
@@ -187,6 +202,7 @@ whole created by this driver, it is BUG - let me know about it.
Bugs in OS/2
+============
When you have two (or more) lost directories pointing each to other, chkdsk
locks up when repairing filesystem.
@@ -199,98 +215,139 @@ File names like "a .b" are marked as 'long' by OS/2 but chkdsk "corrects" it and
marks them as short (and writes "minor fs error corrected"). This bug is not in
HPFS386.
-Codepage bugs described above.
+Codepage bugs described above
+=============================
If you don't install fixpacks, there are many, many more...
History
+=======
-0.90 First public release
-0.91 Fixed bug that caused shooting to memory when write_inode was called on
- open inode (rarely happened)
-0.92 Fixed a little memory leak in freeing directory inodes
-0.93 Fixed bug that locked up the machine when there were too many filenames
- with first 15 characters same
- Fixed write_file to zero file when writing behind file end
-0.94 Fixed a little memory leak when trying to delete busy file or directory
-0.95 Fixed a bug that i_hpfs_parent_dir was not updated when moving files
-1.90 First version for 2.1.1xx kernels
-1.91 Fixed a bug that chk_sectors failed when sectors were at the end of disk
- Fixed a race-condition when write_inode is called while deleting file
- Fixed a bug that could possibly happen (with very low probability) when
- using 0xff in filenames
- Rewritten locking to avoid race-conditions
- Mount option 'eas' now works
- Fsync no longer returns error
- Files beginning with '.' are marked hidden
- Remount support added
- Alloc is not so slow when filesystem becomes full
- Atimes are no more updated because it slows down operation
- Code cleanup (removed all commented debug prints)
-1.92 Corrected a bug when sync was called just before closing file
-1.93 Modified, so that it works with kernels >= 2.1.131, I don't know if it
- works with previous versions
- Fixed a possible problem with disks > 64G (but I don't have one, so I can't
- test it)
- Fixed a file overflow at 2G
- Added new option 'timeshift'
- Changed behaviour on HPFS386: It is now possible to operate on HPFS386 in
- read-only mode
- Fixed a bug that slowed down alloc and prevented allocating 100% space
- (this bug was not destructive)
-1.94 Added workaround for one bug in Linux
- Fixed one buffer leak
- Fixed some incompatibilities with large extended attributes (but it's still
- not 100% ok, I have no info on it and OS/2 doesn't want to create them)
- Rewritten allocation
- Fixed a bug with i_blocks (du sometimes didn't display correct values)
- Directories have no longer archive attribute set (some programs don't like
- it)
- Fixed a bug that it set badly one flag in large anode tree (it was not
- destructive)
-1.95 Fixed one buffer leak, that could happen on corrupted filesystem
- Fixed one bug in allocation in 1.94
-1.96 Added workaround for one bug in OS/2 (HPFS locked up, HPFS386 reported
- error sometimes when opening directories in PMSHELL)
- Fixed a possible bitmap race
- Fixed possible problem on large disks
- You can now delete open files
- Fixed a nondestructive race in rename
-1.97 Support for HPFS v3 (on large partitions)
- Fixed a bug that it didn't allow creation of files > 128M (it should be 2G)
+====== =========================================================================
+0.90 First public release
+0.91 Fixed bug that caused shooting to memory when write_inode was called on
+ open inode (rarely happened)
+0.92 Fixed a little memory leak in freeing directory inodes
+0.93 Fixed bug that locked up the machine when there were too many filenames
+ with first 15 characters same
+ Fixed write_file to zero file when writing behind file end
+0.94 Fixed a little memory leak when trying to delete busy file or directory
+0.95 Fixed a bug that i_hpfs_parent_dir was not updated when moving files
+1.90 First version for 2.1.1xx kernels
+1.91 Fixed a bug that chk_sectors failed when sectors were at the end of disk
+ Fixed a race-condition when write_inode is called while deleting file
+ Fixed a bug that could possibly happen (with very low probability) when
+ using 0xff in filenames.
+
+ Rewritten locking to avoid race-conditions
+
+ Mount option 'eas' now works
+
+ Fsync no longer returns error
+
+ Files beginning with '.' are marked hidden
+
+ Remount support added
+
+ Alloc is not so slow when filesystem becomes full
+
+ Atimes are no more updated because it slows down operation
+
+ Code cleanup (removed all commented debug prints)
+1.92 Corrected a bug when sync was called just before closing file
+1.93 Modified, so that it works with kernels >= 2.1.131, I don't know if it
+ works with previous versions
+
+ Fixed a possible problem with disks > 64G (but I don't have one, so I can't
+ test it)
+
+ Fixed a file overflow at 2G
+
+ Added new option 'timeshift'
+
+ Changed behaviour on HPFS386: It is now possible to operate on HPFS386 in
+ read-only mode
+
+ Fixed a bug that slowed down alloc and prevented allocating 100% space
+ (this bug was not destructive)
+1.94 Added workaround for one bug in Linux
+
+ Fixed one buffer leak
+
+ Fixed some incompatibilities with large extended attributes (but it's still
+ not 100% ok, I have no info on it and OS/2 doesn't want to create them)
+
+ Rewritten allocation
+
+ Fixed a bug with i_blocks (du sometimes didn't display correct values)
+
+ Directories have no longer archive attribute set (some programs don't like
+ it)
+
+ Fixed a bug that it set badly one flag in large anode tree (it was not
+ destructive)
+1.95 Fixed one buffer leak, that could happen on corrupted filesystem
+
+ Fixed one bug in allocation in 1.94
+1.96 Added workaround for one bug in OS/2 (HPFS locked up, HPFS386 reported
+ error sometimes when opening directories in PMSHELL)
+
+ Fixed a possible bitmap race
+
+ Fixed possible problem on large disks
+
+ You can now delete open files
+
+ Fixed a nondestructive race in rename
+1.97 Support for HPFS v3 (on large partitions)
+
+ ZFixed a bug that it didn't allow creation of files > 128M
+ (it should be 2G)
1.97.1 Changed names of global symbols
+
Fixed a bug when chmoding or chowning root directory
-1.98 Fixed a deadlock when using old_readdir
- Better directory handling; workaround for "unbalanced tree" bug in OS/2
-1.99 Corrected a possible problem when there's not enough space while deleting
- file
- Now it tries to truncate the file if there's not enough space when deleting
- Removed a lot of redundant code
-2.00 Fixed a bug in rename (it was there since 1.96)
- Better anti-fragmentation strategy
-2.01 Fixed problem with directory listing over NFS
- Directory lseek now checks for proper parameters
- Fixed race-condition in buffer code - it is in all filesystems in Linux;
- when reading device (cat /dev/hda) while creating files on it, files
- could be damaged
-2.02 Workaround for bug in breada in Linux. breada could cause accesses beyond
- end of partition
-2.03 Char, block devices and pipes are correctly created
- Fixed non-crashing race in unlink (Alexander Viro)
- Now it works with Japanese version of OS/2
-2.04 Fixed error when ftruncate used to extend file
-2.05 Fixed crash when got mount parameters without =
- Fixed crash when allocation of anode failed due to full disk
- Fixed some crashes when block io or inode allocation failed
-2.06 Fixed some crash on corrupted disk structures
- Better allocation strategy
- Reschedule points added so that it doesn't lock CPU long time
- It should work in read-only mode on Warp Server
-2.07 More fixes for Warp Server. Now it really works
-2.08 Creating new files is not so slow on large disks
- An attempt to sync deleted file does not generate filesystem error
-2.09 Fixed error on extremely fragmented files
-
-
- vim: set textwidth=80:
+1.98 Fixed a deadlock when using old_readdir
+ Better directory handling; workaround for "unbalanced tree" bug in OS/2
+1.99 Corrected a possible problem when there's not enough space while deleting
+ file
+
+ Now it tries to truncate the file if there's not enough space when
+ deleting
+
+ Removed a lot of redundant code
+2.00 Fixed a bug in rename (it was there since 1.96)
+ Better anti-fragmentation strategy
+2.01 Fixed problem with directory listing over NFS
+
+ Directory lseek now checks for proper parameters
+
+ Fixed race-condition in buffer code - it is in all filesystems in Linux;
+ when reading device (cat /dev/hda) while creating files on it, files
+ could be damaged
+2.02 Workaround for bug in breada in Linux. breada could cause accesses beyond
+ end of partition
+2.03 Char, block devices and pipes are correctly created
+
+ Fixed non-crashing race in unlink (Alexander Viro)
+
+ Now it works with Japanese version of OS/2
+2.04 Fixed error when ftruncate used to extend file
+2.05 Fixed crash when got mount parameters without =
+
+ Fixed crash when allocation of anode failed due to full disk
+
+ Fixed some crashes when block io or inode allocation failed
+2.06 Fixed some crash on corrupted disk structures
+
+ Better allocation strategy
+
+ Reschedule points added so that it doesn't lock CPU long time
+
+ It should work in read-only mode on Warp Server
+2.07 More fixes for Warp Server. Now it really works
+2.08 Creating new files is not so slow on large disks
+
+ An attempt to sync deleted file does not generate filesystem error
+2.09 Fixed error on extremely fragmented files
+====== =========================================================================
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f776411340cb..3fbe2fa0b5c5 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -69,6 +69,7 @@ Documentation for filesystem implementations.
gfs2-uevents
hfs
hfsplus
+ hpfs
fuse
overlayfs
virtiofs
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 24/44] docs: filesystems: convert inotify.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (27 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
2020-02-18 7:10 ` Jan Kara
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Jan Kara,
Amir Goldstein
- Add a SPDX header;
- Add a document title;
- Adjust document title;
- Fix list markups;
- Some whitespace fixes and new line breaks;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{inotify.txt => inotify.rst} | 33 ++++++++++++-------
2 files changed, 23 insertions(+), 11 deletions(-)
rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 3fbe2fa0b5c5..5a737722652c 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -70,6 +70,7 @@ Documentation for filesystem implementations.
hfs
hfsplus
hpfs
+ inotify
fuse
overlayfs
virtiofs
diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.rst
similarity index 83%
rename from Documentation/filesystems/inotify.txt
rename to Documentation/filesystems/inotify.rst
index 51f61db787fb..7f7ef8af0e1e 100644
--- a/Documentation/filesystems/inotify.txt
+++ b/Documentation/filesystems/inotify.rst
@@ -1,27 +1,36 @@
- inotify
- a powerful yet simple file change notification system
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================================
+Inotify - A Powerful yet Simple File Change Notification System
+===============================================================
Document started 15 Mar 2005 by Robert Love <rml@novell.com>
+
Document updated 4 Jan 2015 by Zhang Zhen <zhenzhang.zhang@huawei.com>
- --Deleted obsoleted interface, just refer to manpages for user interface.
+
+ - Deleted obsoleted interface, just refer to manpages for user interface.
(i) Rationale
-Q: What is the design decision behind not tying the watch to the open fd of
+Q:
+ What is the design decision behind not tying the watch to the open fd of
the watched object?
-A: Watches are associated with an open inotify device, not an open file.
+A:
+ Watches are associated with an open inotify device, not an open file.
This solves the primary problem with dnotify: keeping the file open pins
the file and thus, worse, pins the mount. Dnotify is therefore infeasible
for use on a desktop system with removable media as the media cannot be
unmounted. Watching a file should not require that it be open.
-Q: What is the design decision behind using an-fd-per-instance as opposed to
+Q:
+ What is the design decision behind using an-fd-per-instance as opposed to
an fd-per-watch?
-A: An fd-per-watch quickly consumes more file descriptors than are allowed,
+A:
+ An fd-per-watch quickly consumes more file descriptors than are allowed,
more fd's than are feasible to manage, and more fd's than are optimally
select()-able. Yes, root can bump the per-process fd limit and yes, users
can use epoll, but requiring both is a silly and extraneous requirement.
@@ -29,8 +38,8 @@ A: An fd-per-watch quickly consumes more file descriptors than are allowed,
spaces is thus sensible. The current design is what user-space developers
want: Users initialize inotify, once, and add n watches, requiring but one
fd and no twiddling with fd limits. Initializing an inotify instance two
- thousand times is silly. If we can implement user-space's preferences
- cleanly--and we can, the idr layer makes stuff like this trivial--then we
+ thousand times is silly. If we can implement user-space's preferences
+ cleanly--and we can, the idr layer makes stuff like this trivial--then we
should.
There are other good arguments. With a single fd, there is a single
@@ -65,9 +74,11 @@ A: An fd-per-watch quickly consumes more file descriptors than are allowed,
need not be a one-fd-per-process mapping; it is one-fd-per-queue and a
process can easily want more than one queue.
-Q: Why the system call approach?
+Q:
+ Why the system call approach?
-A: The poor user-space interface is the second biggest problem with dnotify.
+A:
+ The poor user-space interface is the second biggest problem with dnotify.
Signals are a terrible, terrible interface for file notification. Or for
anything, for that matter. The ideal solution, from all perspectives, is a
file descriptor-based one that allows basic file I/O and poll/select.
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 24/44] docs: filesystems: convert inotify.txt to ReST
2020-02-17 16:12 ` [PATCH 24/44] docs: filesystems: convert inotify.txt " Mauro Carvalho Chehab
@ 2020-02-18 7:10 ` Jan Kara
0 siblings, 0 replies; 112+ messages in thread
From: Jan Kara @ 2020-02-18 7:10 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, Jan Kara,
Amir Goldstein
On Mon 17-02-20 17:12:10, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Add a document title;
> - Adjust document title;
> - Fix list markups;
> - Some whitespace fixes and new line breaks;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thanks. You can add:
Acked-by: Jan Kara <jack@suse.cz>
or tell me if you want me to pick up this patch.
Honza
> ---
> Documentation/filesystems/index.rst | 1 +
> .../filesystems/{inotify.txt => inotify.rst} | 33 ++++++++++++-------
> 2 files changed, 23 insertions(+), 11 deletions(-)
> rename Documentation/filesystems/{inotify.txt => inotify.rst} (83%)
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index 3fbe2fa0b5c5..5a737722652c 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -70,6 +70,7 @@ Documentation for filesystem implementations.
> hfs
> hfsplus
> hpfs
> + inotify
> fuse
> overlayfs
> virtiofs
> diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.rst
> similarity index 83%
> rename from Documentation/filesystems/inotify.txt
> rename to Documentation/filesystems/inotify.rst
> index 51f61db787fb..7f7ef8af0e1e 100644
> --- a/Documentation/filesystems/inotify.txt
> +++ b/Documentation/filesystems/inotify.rst
> @@ -1,27 +1,36 @@
> - inotify
> - a powerful yet simple file change notification system
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===============================================================
> +Inotify - A Powerful yet Simple File Change Notification System
> +===============================================================
>
>
>
> Document started 15 Mar 2005 by Robert Love <rml@novell.com>
> +
> Document updated 4 Jan 2015 by Zhang Zhen <zhenzhang.zhang@huawei.com>
> - --Deleted obsoleted interface, just refer to manpages for user interface.
> +
> + - Deleted obsoleted interface, just refer to manpages for user interface.
>
> (i) Rationale
>
> -Q: What is the design decision behind not tying the watch to the open fd of
> +Q:
> + What is the design decision behind not tying the watch to the open fd of
> the watched object?
>
> -A: Watches are associated with an open inotify device, not an open file.
> +A:
> + Watches are associated with an open inotify device, not an open file.
> This solves the primary problem with dnotify: keeping the file open pins
> the file and thus, worse, pins the mount. Dnotify is therefore infeasible
> for use on a desktop system with removable media as the media cannot be
> unmounted. Watching a file should not require that it be open.
>
> -Q: What is the design decision behind using an-fd-per-instance as opposed to
> +Q:
> + What is the design decision behind using an-fd-per-instance as opposed to
> an fd-per-watch?
>
> -A: An fd-per-watch quickly consumes more file descriptors than are allowed,
> +A:
> + An fd-per-watch quickly consumes more file descriptors than are allowed,
> more fd's than are feasible to manage, and more fd's than are optimally
> select()-able. Yes, root can bump the per-process fd limit and yes, users
> can use epoll, but requiring both is a silly and extraneous requirement.
> @@ -29,8 +38,8 @@ A: An fd-per-watch quickly consumes more file descriptors than are allowed,
> spaces is thus sensible. The current design is what user-space developers
> want: Users initialize inotify, once, and add n watches, requiring but one
> fd and no twiddling with fd limits. Initializing an inotify instance two
> - thousand times is silly. If we can implement user-space's preferences
> - cleanly--and we can, the idr layer makes stuff like this trivial--then we
> + thousand times is silly. If we can implement user-space's preferences
> + cleanly--and we can, the idr layer makes stuff like this trivial--then we
> should.
>
> There are other good arguments. With a single fd, there is a single
> @@ -65,9 +74,11 @@ A: An fd-per-watch quickly consumes more file descriptors than are allowed,
> need not be a one-fd-per-process mapping; it is one-fd-per-queue and a
> process can easily want more than one queue.
>
> -Q: Why the system call approach?
> +Q:
> + Why the system call approach?
>
> -A: The poor user-space interface is the second biggest problem with dnotify.
> +A:
> + The poor user-space interface is the second biggest problem with dnotify.
> Signals are a terrible, terrible interface for file notification. Or for
> anything, for that matter. The ideal solution, from all perspectives, is a
> file descriptor-based one that allows basic file I/O and poll/select.
> --
> 2.24.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 25/44] docs: filesystems: convert isofs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (28 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
Documentation/filesystems/isofs.rst | 64 +++++++++++++++++++++++++++++
Documentation/filesystems/isofs.txt | 48 ----------------------
3 files changed, 65 insertions(+), 48 deletions(-)
create mode 100644 Documentation/filesystems/isofs.rst
delete mode 100644 Documentation/filesystems/isofs.txt
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 5a737722652c..8c8813ada53f 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -71,6 +71,7 @@ Documentation for filesystem implementations.
hfsplus
hpfs
inotify
+ isofs
fuse
overlayfs
virtiofs
diff --git a/Documentation/filesystems/isofs.rst b/Documentation/filesystems/isofs.rst
new file mode 100644
index 000000000000..08fd469091d4
--- /dev/null
+++ b/Documentation/filesystems/isofs.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+ISO9660 Filesystem
+==================
+
+Mount options that are the same as for msdos and vfat partitions.
+
+ ========= ========================================================
+ gid=nnn All files in the partition will be in group nnn.
+ uid=nnn All files in the partition will be owned by user id nnn.
+ umask=nnn The permission mask (see umask(1)) for the partition.
+ ========= ========================================================
+
+Mount options that are the same as vfat partitions. These are only useful
+when using discs encoded using Microsoft's Joliet extensions.
+
+ ============== =============================================================
+ iocharset=name Character set to use for converting from Unicode to
+ ASCII. Joliet filenames are stored in Unicode format, but
+ Unix for the most part doesn't know how to deal with Unicode.
+ There is also an option of doing UTF-8 translations with the
+ utf8 option.
+ utf8 Encode Unicode names in UTF-8 format. Default is no.
+ ============== =============================================================
+
+Mount options unique to the isofs filesystem.
+
+ ================= ============================================================
+ block=512 Set the block size for the disk to 512 bytes
+ block=1024 Set the block size for the disk to 1024 bytes
+ block=2048 Set the block size for the disk to 2048 bytes
+ check=relaxed Matches filenames with different cases
+ check=strict Matches only filenames with the exact same case
+ cruft Try to handle badly formatted CDs.
+ map=off Do not map non-Rock Ridge filenames to lower case
+ map=normal Map non-Rock Ridge filenames to lower case
+ map=acorn As map=normal but also apply Acorn extensions if present
+ mode=xxx Sets the permissions on files to xxx unless Rock Ridge
+ extensions set the permissions otherwise
+ dmode=xxx Sets the permissions on directories to xxx unless Rock Ridge
+ extensions set the permissions otherwise
+ overriderockperm Set permissions on files and directories according to
+ 'mode' and 'dmode' even though Rock Ridge extensions are
+ present.
+ nojoliet Ignore Joliet extensions if they are present.
+ norock Ignore Rock Ridge extensions if they are present.
+ hide Completely strip hidden files from the file system.
+ showassoc Show files marked with the 'associated' bit
+ unhide Deprecated; showing hidden files is now default;
+ If given, it is a synonym for 'showassoc' which will
+ recreate previous unhide behavior
+ session=x Select number of session on multisession CD
+ sbsector=xxx Session begins from sector xxx
+ ================= ============================================================
+
+Recommended documents about ISO 9660 standard are located at:
+
+- http://www.y-adagio.com/
+- ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
+
+Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically
+identical with ISO 9660.", so it is a valid and gratis substitute of the
+official ISO specification.
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
deleted file mode 100644
index ba0a93384de0..000000000000
--- a/Documentation/filesystems/isofs.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Mount options that are the same as for msdos and vfat partitions.
-
- gid=nnn All files in the partition will be in group nnn.
- uid=nnn All files in the partition will be owned by user id nnn.
- umask=nnn The permission mask (see umask(1)) for the partition.
-
-Mount options that are the same as vfat partitions. These are only useful
-when using discs encoded using Microsoft's Joliet extensions.
- iocharset=name Character set to use for converting from Unicode to
- ASCII. Joliet filenames are stored in Unicode format, but
- Unix for the most part doesn't know how to deal with Unicode.
- There is also an option of doing UTF-8 translations with the
- utf8 option.
- utf8 Encode Unicode names in UTF-8 format. Default is no.
-
-Mount options unique to the isofs filesystem.
- block=512 Set the block size for the disk to 512 bytes
- block=1024 Set the block size for the disk to 1024 bytes
- block=2048 Set the block size for the disk to 2048 bytes
- check=relaxed Matches filenames with different cases
- check=strict Matches only filenames with the exact same case
- cruft Try to handle badly formatted CDs.
- map=off Do not map non-Rock Ridge filenames to lower case
- map=normal Map non-Rock Ridge filenames to lower case
- map=acorn As map=normal but also apply Acorn extensions if present
- mode=xxx Sets the permissions on files to xxx unless Rock Ridge
- extensions set the permissions otherwise
- dmode=xxx Sets the permissions on directories to xxx unless Rock Ridge
- extensions set the permissions otherwise
- overriderockperm Set permissions on files and directories according to
- 'mode' and 'dmode' even though Rock Ridge extensions are
- present.
- nojoliet Ignore Joliet extensions if they are present.
- norock Ignore Rock Ridge extensions if they are present.
- hide Completely strip hidden files from the file system.
- showassoc Show files marked with the 'associated' bit
- unhide Deprecated; showing hidden files is now default;
- If given, it is a synonym for 'showassoc' which will
- recreate previous unhide behavior
- session=x Select number of session on multisession CD
- sbsector=xxx Session begins from sector xxx
-
-Recommended documents about ISO 9660 standard are located at:
-http://www.y-adagio.com/
-ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
-Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically
-identical with ISO 9660.", so it is a valid and gratis substitute of the
-official ISO specification.
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 26/44] docs: filesystems: convert nilfs2.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (29 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Ryusuke Konishi, linux-nilfs
- Add a SPDX header;
- Add a document title;
- Adjust document title;
- Mark literal blocks as such;
- use :field: markup;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 3 +-
.../filesystems/{nilfs2.txt => nilfs2.rst} | 40 ++++++++++++-------
2 files changed, 27 insertions(+), 16 deletions(-)
rename Documentation/filesystems/{nilfs2.txt => nilfs2.rst} (89%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 8c8813ada53f..01587704fcc9 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -70,9 +70,10 @@ Documentation for filesystem implementations.
hfs
hfsplus
hpfs
+ fuse
inotify
isofs
- fuse
+ nilfs2
overlayfs
virtiofs
vfat
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.rst
similarity index 89%
rename from Documentation/filesystems/nilfs2.txt
rename to Documentation/filesystems/nilfs2.rst
index f2f3f8592a6f..6c49f04e9e0a 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======
NILFS2
-------
+======
NILFS2 is a log-structured file system (LFS) supporting continuous
snapshotting. In addition to versioning capability of the entire file
@@ -25,9 +28,9 @@ available from the following download page. At least "mkfs.nilfs2",
cleaner or garbage collector) are required. Details on the tools are
described in the man pages included in the package.
-Project web page: https://nilfs.sourceforge.io/
-Download page: https://nilfs.sourceforge.io/en/download.html
-List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
+:Project web page: https://nilfs.sourceforge.io/
+:Download page: https://nilfs.sourceforge.io/en/download.html
+:List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
Caveats
=======
@@ -47,6 +50,7 @@ Mount options
NILFS2 supports the following mount options:
(*) == default
+======================= =======================================================
barrier(*) This enables/disables the use of write barriers. This
nobarrier requires an IO stack which can support barriers, and
if nilfs gets an error on a barrier write, it will
@@ -79,6 +83,7 @@ discard This enables/disables the use of discard/TRIM commands.
nodiscard(*) The discard/TRIM commands are sent to the underlying
block device when blocks are freed. This is useful
for SSD devices and sparse/thinly-provisioned LUNs.
+======================= =======================================================
Ioctls
======
@@ -87,9 +92,11 @@ There is some NILFS2 specific functionality which can be accessed by application
through the system call interfaces. The list of all NILFS2 specific ioctls are
shown in the table below.
-Table of NILFS2 specific ioctls
-..............................................................................
+Table of NILFS2 specific ioctls:
+
+ ============================== ===============================================
Ioctl Description
+ ============================== ===============================================
NILFS_IOCTL_CHANGE_CPMODE Change mode of given checkpoint between
checkpoint and snapshot state. This ioctl is
used in chcp and mkcp utilities.
@@ -142,11 +149,12 @@ Table of NILFS2 specific ioctls
NILFS_IOCTL_SET_ALLOC_RANGE Define lower limit of segments in bytes and
upper limit of segments in bytes. This ioctl
is used by nilfs_resize utility.
+ ============================== ===============================================
NILFS2 usage
============
-To use nilfs2 as a local file system, simply:
+To use nilfs2 as a local file system, simply::
# mkfs -t nilfs2 /dev/block_device
# mount -t nilfs2 /dev/block_device /dir
@@ -157,18 +165,20 @@ This will also invoke the cleaner through the mount helper program
Checkpoints and snapshots are managed by the following commands.
Their manpages are included in the nilfs-utils package above.
+ ==== ===========================================================
lscp list checkpoints or snapshots.
mkcp make a checkpoint or a snapshot.
chcp change an existing checkpoint to a snapshot or vice versa.
rmcp invalidate specified checkpoint(s).
+ ==== ===========================================================
-To mount a snapshot,
+To mount a snapshot::
# mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir
where <cno> is the checkpoint number of the snapshot.
-To unmount the NILFS2 mount point or snapshot, simply:
+To unmount the NILFS2 mount point or snapshot, simply::
# umount /dir
@@ -181,7 +191,7 @@ Disk format
A nilfs2 volume is equally divided into a number of segments except
for the super block (SB) and segment #0. A segment is the container
of logs. Each log is composed of summary information blocks, payload
-blocks, and an optional super root block (SR):
+blocks, and an optional super root block (SR)::
______________________________________________________
| |SB| | Segment | Segment | Segment | ... | Segment | |
@@ -200,7 +210,7 @@ blocks, and an optional super root block (SR):
|_blocks__|_________________|__|
The payload blocks are organized per file, and each file consists of
-data blocks and B-tree node blocks:
+data blocks and B-tree node blocks::
|<--- File-A --->|<--- File-B --->|
_______________________________________________________________
@@ -213,7 +223,7 @@ files without data blocks or B-tree node blocks.
The organization of the blocks is recorded in the summary information
blocks, which contains a header structure (nilfs_segment_summary), per
-file structures (nilfs_finfo), and per block structures (nilfs_binfo):
+file structures (nilfs_finfo), and per block structures (nilfs_binfo)::
_________________________________________________________________________
| Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |...
@@ -223,7 +233,7 @@ file structures (nilfs_finfo), and per block structures (nilfs_binfo):
The logs include regular files, directory files, symbolic link files
and several meta data files. The mata data files are the files used
to maintain file system meta data. The current version of NILFS2 uses
-the following meta data files:
+the following meta data files::
1) Inode file (ifile) -- Stores on-disk inodes
2) Checkpoint file (cpfile) -- Stores checkpoints
@@ -232,7 +242,7 @@ the following meta data files:
(DAT) block numbers. This file serves to
make on-disk blocks relocatable.
-The following figure shows a typical organization of the logs:
+The following figure shows a typical organization of the logs::
_________________________________________________________________________
| Summary | regular file | file | ... | ifile | cpfile | sufile | DAT |SR|
@@ -250,7 +260,7 @@ three special inodes, inodes for the DAT, cpfile, and sufile. Inodes
of regular files, directories, symlinks and other special files, are
included in the ifile. The inode of ifile itself is included in the
corresponding checkpoint entry in the cpfile. Thus, the hierarchy
-among NILFS2 files can be depicted as follows:
+among NILFS2 files can be depicted as follows::
Super block (SB)
|
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 27/44] docs: filesystems: convert ntfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (30 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Anton Altaparmakov, linux-ntfs-dev
- Add a SPDX header;
- Adjust document title;
- Comment out text-only ToC;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 3 +-
.../filesystems/{ntfs.txt => ntfs.rst} | 143 ++++++++++--------
2 files changed, 81 insertions(+), 65 deletions(-)
rename Documentation/filesystems/{ntfs.txt => ntfs.rst} (85%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 01587704fcc9..62be53c4755d 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -74,7 +74,8 @@ Documentation for filesystem implementations.
inotify
isofs
nilfs2
+ nfs/index
+ ntfs
overlayfs
virtiofs
vfat
- nfs/index
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.rst
similarity index 85%
rename from Documentation/filesystems/ntfs.txt
rename to Documentation/filesystems/ntfs.rst
index 553f10d03076..5bb093a26485 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.rst
@@ -1,19 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
The Linux NTFS filesystem driver
================================
-Table of contents
-=================
+.. Table of contents
-- Overview
-- Web site
-- Features
-- Supported mount options
-- Known bugs and (mis-)features
-- Using NTFS volume and stripe sets
- - The Device-Mapper driver
- - The Software RAID / MD driver
- - Limitations when using the MD driver
+ - Overview
+ - Web site
+ - Features
+ - Supported mount options
+ - Known bugs and (mis-)features
+ - Using NTFS volume and stripe sets
+ - The Device-Mapper driver
+ - The Software RAID / MD driver
+ - Limitations when using the MD driver
Overview
@@ -66,8 +68,10 @@ Features
partition by creating a large file while in Windows and then loopback
mounting the file while in Linux and creating a Linux filesystem on it that
is used to install Linux on it.
-- A comparison of the two drivers using:
+- A comparison of the two drivers using::
+
time find . -type f -exec md5sum "{}" \;
+
run three times in sequence with each driver (after a reboot) on a 1.4GiB
NTFS partition, showed the new driver to be 20% faster in total time elapsed
(from 9:43 minutes on average down to 7:53). The time spent in user space
@@ -104,6 +108,7 @@ In addition to the generic mount options described by the manual page for the
mount command (man 8 mount, also see man 5 fstab), the NTFS driver supports the
following mount options:
+======================= =======================================================
iocharset=name Deprecated option. Still supported but please use
nls=name in the future. See description for nls=name.
@@ -175,16 +180,22 @@ disable_sparse=<BOOL> If disable_sparse is specified, creation of sparse
errors=opt What to do when critical filesystem errors are found.
Following values can be used for "opt":
- continue: DEFAULT, try to clean-up as much as
+
+ ======== =========================================
+ continue DEFAULT, try to clean-up as much as
possible, e.g. marking a corrupt inode as
bad so it is no longer accessed, and then
continue.
- recover: At present only supported is recovery of
+ recover At present only supported is recovery of
the boot sector from the backup copy.
If read-only mount, the recovery is done
in memory only and not written to disk.
- Note that the options are additive, i.e. specifying:
+ ======== =========================================
+
+ Note that the options are additive, i.e. specifying::
+
errors=continue,errors=recover
+
means the driver will attempt to recover and if that
fails it will clean-up as much as possible and
continue.
@@ -202,12 +213,18 @@ mft_zone_multiplier= Set the MFT zone multiplier for the volume (this
In general use the default. If you have a lot of small
files then use a higher value. The values have the
following meaning:
+
+ ===== =================================
Value MFT zone size (% of volume size)
+ ===== =================================
1 12.5%
2 25%
3 37.5%
4 50%
+ ===== =================================
+
Note this option is irrelevant for read-only mounts.
+======================= =======================================================
Known bugs and (mis-)features
@@ -252,18 +269,18 @@ To create the table describing your volume you will need to know each of its
components and their sizes in sectors, i.e. multiples of 512-byte blocks.
For NT4 fault tolerant volumes you can obtain the sizes using fdisk. So for
-example if one of your partitions is /dev/hda2 you would do:
+example if one of your partitions is /dev/hda2 you would do::
-$ fdisk -ul /dev/hda
+ $ fdisk -ul /dev/hda
-Disk /dev/hda: 81.9 GB, 81964302336 bytes
-255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
-Units = sectors of 1 * 512 = 512 bytes
+ Disk /dev/hda: 81.9 GB, 81964302336 bytes
+ 255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
+ Units = sectors of 1 * 512 = 512 bytes
- Device Boot Start End Blocks Id System
- /dev/hda1 * 63 4209029 2104483+ 83 Linux
- /dev/hda2 4209030 37768814 16779892+ 86 NTFS
- /dev/hda3 37768815 46170809 4200997+ 83 Linux
+ Device Boot Start End Blocks Id System
+ /dev/hda1 * 63 4209029 2104483+ 83 Linux
+ /dev/hda2 4209030 37768814 16779892+ 86 NTFS
+ /dev/hda3 37768815 46170809 4200997+ 83 Linux
And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
33559785 sectors.
@@ -271,15 +288,17 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
For Win2k and later dynamic disks, you can for example use the ldminfo utility
which is part of the Linux LDM tools (the latest version at the time of
writing is linux-ldm-0.0.8.tar.bz2). You can download it from:
+
http://www.linux-ntfs.org/
+
Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You
will find the precompiled (i386) ldminfo utility there. NOTE: You will not be
able to compile this yourself easily so use the binary version!
-Then you would use ldminfo in dump mode to obtain the necessary information:
+Then you would use ldminfo in dump mode to obtain the necessary information::
-$ ./ldminfo --dump /dev/hda
+ $ ./ldminfo --dump /dev/hda
This would dump the LDM database found on /dev/hda which describes all of your
dynamic disks and all the volumes on them. At the bottom you will see the
@@ -305,42 +324,36 @@ give you the correct information to do this.
Assuming you know all your devices and their sizes things are easy.
For a linear raid the table would look like this (note all values are in
-512-byte sectors):
+512-byte sectors)::
---- cut here ---
-# Offset into Size of this Raid type Device Start sector
-# volume device of device
-0 1028161 linear /dev/hda1 0
-1028161 3903762 linear /dev/hdb2 0
-4931923 2103211 linear /dev/hdc1 0
---- cut here ---
+ # Offset into Size of this Raid type Device Start sector
+ # volume device of device
+ 0 1028161 linear /dev/hda1 0
+ 1028161 3903762 linear /dev/hdb2 0
+ 4931923 2103211 linear /dev/hdc1 0
For a striped volume, i.e. raid level 0, you will need to know the chunk size
you used when creating the volume. Windows uses 64kiB as the default, so it
will probably be this unless you changes the defaults when creating the array.
For a raid level 0 the table would look like this (note all values are in
-512-byte sectors):
+512-byte sectors)::
---- cut here ---
-# Offset Size Raid Number Chunk 1st Start 2nd Start
-# into of the type of size Device in Device in
-# volume volume stripes device device
-0 2056320 striped 2 128 /dev/hda1 0 /dev/hdb1 0
---- cut here ---
+ # Offset Size Raid Number Chunk 1st Start 2nd Start
+ # into of the type of size Device in Device in
+ # volume volume stripes device device
+ 0 2056320 striped 2 128 /dev/hda1 0 /dev/hdb1 0
If there are more than two devices, just add each of them to the end of the
line.
Finally, for a mirrored volume, i.e. raid level 1, the table would look like
-this (note all values are in 512-byte sectors):
+this (note all values are in 512-byte sectors)::
---- cut here ---
-# Ofs Size Raid Log Number Region Should Number Source Start Target Start
-# in of the type type of log size sync? of Device in Device in
-# vol volume params mirrors Device Device
-0 2056320 mirror core 2 16 nosync 2 /dev/hda1 0 /dev/hdb1 0
---- cut here ---
+ # Ofs Size Raid Log Number Region Should Number Source Start Target Start
+ # in of the type type of log size sync? of Device in Device in
+ # vol volume params mirrors Device Device
+ 0 2056320 mirror core 2 16 nosync 2 /dev/hda1 0 /dev/hdb1 0
If you are mirroring to multiple devices you can specify further targets at the
end of the line.
@@ -353,17 +366,17 @@ to the "Target Device" or if you specified multiple target devices to all of
them.
Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1),
-and hand it over to dmsetup to work with, like so:
+and hand it over to dmsetup to work with, like so::
-$ dmsetup create myvolume1 /etc/ntfsvolume1
+ $ dmsetup create myvolume1 /etc/ntfsvolume1
You can obviously replace "myvolume1" with whatever name you like.
If it all worked, you will now have the device /dev/device-mapper/myvolume1
which you can then just use as an argument to the mount command as usual to
-mount the ntfs volume. For example:
+mount the ntfs volume. For example::
-$ mount -t ntfs -o ro /dev/device-mapper/myvolume1 /mnt/myvol1
+ $ mount -t ntfs -o ro /dev/device-mapper/myvolume1 /mnt/myvol1
(You need to create the directory /mnt/myvol1 first and of course you can use
anything you like instead of /mnt/myvol1 as long as it is an existing
@@ -395,18 +408,18 @@ Windows by default uses a stripe chunk size of 64k, so you probably want the
"chunk-size 64k" option for each raid-disk, too.
For example, if you have a stripe set consisting of two partitions /dev/hda5
-and /dev/hdb1 your /etc/raidtab would look like this:
+and /dev/hdb1 your /etc/raidtab would look like this::
-raiddev /dev/md0
- raid-level 0
- nr-raid-disks 2
- nr-spare-disks 0
- persistent-superblock 0
- chunk-size 64k
- device /dev/hda5
- raid-disk 0
- device /dev/hdb1
- raid-disk 1
+ raiddev /dev/md0
+ raid-level 0
+ nr-raid-disks 2
+ nr-spare-disks 0
+ persistent-superblock 0
+ chunk-size 64k
+ device /dev/hda5
+ raid-disk 0
+ device /dev/hdb1
+ raid-disk 1
For linear raid, just change the raid-level above to "raid-level linear", for
mirrors, change it to "raid-level 1", and for stripe sets with parity, change
@@ -427,7 +440,9 @@ Once the raidtab is setup, run for example raid0run -a to start all devices or
raid0run /dev/md0 to start a particular md device, in this case /dev/md0.
Then just use the mount command as usual to mount the ntfs volume using for
-example: mount -t ntfs -o ro /dev/md0 /mnt/myntfsvolume
+example::
+
+ mount -t ntfs -o ro /dev/md0 /mnt/myntfsvolume
It is advisable to do the mount read-only to see if the md volume has been
setup correctly to avoid the possibility of causing damage to the data on the
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 28/44] docs: filesystems: convert ocfs2-online-filecheck.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (31 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
...lecheck.txt => ocfs2-online-filecheck.rst} | 45 ++++++++++---------
2 files changed, 26 insertions(+), 20 deletions(-)
rename Documentation/filesystems/{ocfs2-online-filecheck.txt => ocfs2-online-filecheck.rst} (77%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 62be53c4755d..f3a26fdbd04f 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -76,6 +76,7 @@ Documentation for filesystem implementations.
nilfs2
nfs/index
ntfs
+ ocfs2-online-filecheck
overlayfs
virtiofs
vfat
diff --git a/Documentation/filesystems/ocfs2-online-filecheck.txt b/Documentation/filesystems/ocfs2-online-filecheck.rst
similarity index 77%
rename from Documentation/filesystems/ocfs2-online-filecheck.txt
rename to Documentation/filesystems/ocfs2-online-filecheck.rst
index 139fab175c8a..2257bb53edc1 100644
--- a/Documentation/filesystems/ocfs2-online-filecheck.txt
+++ b/Documentation/filesystems/ocfs2-online-filecheck.rst
@@ -1,5 +1,8 @@
- OCFS2 online file check
- -----------------------
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+OCFS2 file system - online file check
+=====================================
This document will describe OCFS2 online file check feature.
@@ -40,7 +43,7 @@ When there are errors in the OCFS2 filesystem, they are usually accompanied
by the inode number which caused the error. This inode number would be the
input to check/fix the file.
-There is a sysfs directory for each OCFS2 file system mounting:
+There is a sysfs directory for each OCFS2 file system mounting::
/sys/fs/ocfs2/<devname>/filecheck
@@ -50,34 +53,36 @@ communicate with kernel space, tell which file(inode number) will be checked or
fixed. Currently, three operations are supported, which includes checking
inode, fixing inode and setting the size of result record history.
-1. If you want to know what error exactly happened to <inode> before fixing, do
+1. If you want to know what error exactly happened to <inode> before fixing, do::
- # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/check
- # cat /sys/fs/ocfs2/<devname>/filecheck/check
+ # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/check
+ # cat /sys/fs/ocfs2/<devname>/filecheck/check
-The output is like this:
- INO DONE ERROR
-39502 1 GENERATION
+The output is like this::
-<INO> lists the inode numbers.
-<DONE> indicates whether the operation has been finished.
-<ERROR> says what kind of errors was found. For the detailed error numbers,
-please refer to the file linux/fs/ocfs2/filecheck.h.
+ INO DONE ERROR
+ 39502 1 GENERATION
-2. If you determine to fix this inode, do
+ <INO> lists the inode numbers.
+ <DONE> indicates whether the operation has been finished.
+ <ERROR> says what kind of errors was found. For the detailed error numbers,
+ please refer to the file linux/fs/ocfs2/filecheck.h.
- # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/fix
- # cat /sys/fs/ocfs2/<devname>/filecheck/fix
+2. If you determine to fix this inode, do::
-The output is like this:
- INO DONE ERROR
-39502 1 SUCCESS
+ # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/fix
+ # cat /sys/fs/ocfs2/<devname>/filecheck/fix
+
+The output is like this:::
+
+ INO DONE ERROR
+ 39502 1 SUCCESS
This time, the <ERROR> column indicates whether this fix is successful or not.
3. The record cache is used to store the history of check/fix results. It's
default size is 10, and can be adjust between the range of 10 ~ 100. You can
-adjust the size like this:
+adjust the size like this::
# echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 29/44] docs: filesystems: convert ocfs2.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Mark Fasheh, Joel Becker, Joseph Qi, ocfs2-devel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +++++++++++++------
2 files changed, 22 insertions(+), 10 deletions(-)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f3a26fdbd04f..3b2b07491c98 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -76,6 +76,7 @@ Documentation for filesystem implementations.
nilfs2
nfs/index
ntfs
+ ocfs2
ocfs2-online-filecheck
overlayfs
virtiofs
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.rst
similarity index 88%
rename from Documentation/filesystems/ocfs2.txt
rename to Documentation/filesystems/ocfs2.rst
index 4c49e5410595..412386bc6506 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.rst
@@ -1,5 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
OCFS2 filesystem
-==================
+================
+
OCFS2 is a general purpose extent based shared disk cluster file
system with many similarities to ext3. It supports 64 bit inode
numbers, and has automatically extending metadata groups which may
@@ -14,22 +18,26 @@ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
-CREDITS:
+Credits
+=======
+
Lots of code taken from ext3 and other projects.
Authors in alphabetical order:
-Joel Becker <joel.becker@oracle.com>
-Zach Brown <zach.brown@oracle.com>
-Mark Fasheh <mfasheh@suse.com>
-Kurt Hackel <kurt.hackel@oracle.com>
-Tao Ma <tao.ma@oracle.com>
-Sunil Mushran <sunil.mushran@oracle.com>
-Manish Singh <manish.singh@oracle.com>
-Tiger Yang <tiger.yang@oracle.com>
+
+- Joel Becker <joel.becker@oracle.com>
+- Zach Brown <zach.brown@oracle.com>
+- Mark Fasheh <mfasheh@suse.com>
+- Kurt Hackel <kurt.hackel@oracle.com>
+- Tao Ma <tao.ma@oracle.com>
+- Sunil Mushran <sunil.mushran@oracle.com>
+- Manish Singh <manish.singh@oracle.com>
+- Tiger Yang <tiger.yang@oracle.com>
Caveats
=======
Features which OCFS2 does not support yet:
+
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
@@ -37,8 +45,10 @@ Mount options
=============
OCFS2 supports the following mount options:
+
(*) == default
+======================= ========================================================
barrier=1 This enables/disables barriers. barrier=0 disables it,
barrier=1 enables it.
errors=remount-ro(*) Remount the filesystem read-only on an error.
@@ -104,3 +114,4 @@ journal_async_commit Commit block can be written to disk without waiting
for descriptor blocks. If enabled older kernels cannot
mount the device. This will enable 'journal_checksum'
internally.
+======================= ========================================================
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 29/44] docs: filesystems: convert ocfs2.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: ocfs2-devel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +++++++++++++------
2 files changed, 22 insertions(+), 10 deletions(-)
rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index f3a26fdbd04f..3b2b07491c98 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -76,6 +76,7 @@ Documentation for filesystem implementations.
nilfs2
nfs/index
ntfs
+ ocfs2
ocfs2-online-filecheck
overlayfs
virtiofs
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.rst
similarity index 88%
rename from Documentation/filesystems/ocfs2.txt
rename to Documentation/filesystems/ocfs2.rst
index 4c49e5410595..412386bc6506 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.rst
@@ -1,5 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
OCFS2 filesystem
-==================
+================
+
OCFS2 is a general purpose extent based shared disk cluster file
system with many similarities to ext3. It supports 64 bit inode
numbers, and has automatically extending metadata groups which may
@@ -14,22 +18,26 @@ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
All code copyright 2005 Oracle except when otherwise noted.
-CREDITS:
+Credits
+=======
+
Lots of code taken from ext3 and other projects.
Authors in alphabetical order:
-Joel Becker <joel.becker@oracle.com>
-Zach Brown <zach.brown@oracle.com>
-Mark Fasheh <mfasheh@suse.com>
-Kurt Hackel <kurt.hackel@oracle.com>
-Tao Ma <tao.ma@oracle.com>
-Sunil Mushran <sunil.mushran@oracle.com>
-Manish Singh <manish.singh@oracle.com>
-Tiger Yang <tiger.yang@oracle.com>
+
+- Joel Becker <joel.becker@oracle.com>
+- Zach Brown <zach.brown@oracle.com>
+- Mark Fasheh <mfasheh@suse.com>
+- Kurt Hackel <kurt.hackel@oracle.com>
+- Tao Ma <tao.ma@oracle.com>
+- Sunil Mushran <sunil.mushran@oracle.com>
+- Manish Singh <manish.singh@oracle.com>
+- Tiger Yang <tiger.yang@oracle.com>
Caveats
=======
Features which OCFS2 does not support yet:
+
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
@@ -37,8 +45,10 @@ Mount options
=============
OCFS2 supports the following mount options:
+
(*) == default
+======================= ========================================================
barrier=1 This enables/disables barriers. barrier=0 disables it,
barrier=1 enables it.
errors=remount-ro(*) Remount the filesystem read-only on an error.
@@ -104,3 +114,4 @@ journal_async_commit Commit block can be written to disk without waiting
for descriptor blocks. If enabled older kernels cannot
mount the device. This will enable 'journal_checksum'
internally.
+======================= ========================================================
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 29/44] docs: filesystems: convert ocfs2.txt to ReST
2020-02-17 16:12 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-18 1:23 ` Joseph Qi
-1 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 1:23 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 00:12, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Looks good.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
> ---
> Documentation/filesystems/index.rst | 1 +
> .../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +++++++++++++------
> 2 files changed, 22 insertions(+), 10 deletions(-)
> rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index f3a26fdbd04f..3b2b07491c98 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -76,6 +76,7 @@ Documentation for filesystem implementations.
> nilfs2
> nfs/index
> ntfs
> + ocfs2
> ocfs2-online-filecheck
> overlayfs
> virtiofs
> diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.rst
> similarity index 88%
> rename from Documentation/filesystems/ocfs2.txt
> rename to Documentation/filesystems/ocfs2.rst
> index 4c49e5410595..412386bc6506 100644
> --- a/Documentation/filesystems/ocfs2.txt
> +++ b/Documentation/filesystems/ocfs2.rst
> @@ -1,5 +1,9 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +================
> OCFS2 filesystem
> -==================
> +================
> +
> OCFS2 is a general purpose extent based shared disk cluster file
> system with many similarities to ext3. It supports 64 bit inode
> numbers, and has automatically extending metadata groups which may
> @@ -14,22 +18,26 @@ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
>
> All code copyright 2005 Oracle except when otherwise noted.
>
> -CREDITS:
> +Credits
> +=======
> +
> Lots of code taken from ext3 and other projects.
>
> Authors in alphabetical order:
> -Joel Becker <joel.becker@oracle.com>
> -Zach Brown <zach.brown@oracle.com>
> -Mark Fasheh <mfasheh@suse.com>
> -Kurt Hackel <kurt.hackel@oracle.com>
> -Tao Ma <tao.ma@oracle.com>
> -Sunil Mushran <sunil.mushran@oracle.com>
> -Manish Singh <manish.singh@oracle.com>
> -Tiger Yang <tiger.yang@oracle.com>
> +
> +- Joel Becker <joel.becker@oracle.com>
> +- Zach Brown <zach.brown@oracle.com>
> +- Mark Fasheh <mfasheh@suse.com>
> +- Kurt Hackel <kurt.hackel@oracle.com>
> +- Tao Ma <tao.ma@oracle.com>
> +- Sunil Mushran <sunil.mushran@oracle.com>
> +- Manish Singh <manish.singh@oracle.com>
> +- Tiger Yang <tiger.yang@oracle.com>
>
> Caveats
> =======
> Features which OCFS2 does not support yet:
> +
> - Directory change notification (F_NOTIFY)
> - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
>
> @@ -37,8 +45,10 @@ Mount options
> =============
>
> OCFS2 supports the following mount options:
> +
> (*) == default
>
> +======================= ========================================================
> barrier=1 This enables/disables barriers. barrier=0 disables it,
> barrier=1 enables it.
> errors=remount-ro(*) Remount the filesystem read-only on an error.
> @@ -104,3 +114,4 @@ journal_async_commit Commit block can be written to disk without waiting
> for descriptor blocks. If enabled older kernels cannot
> mount the device. This will enable 'journal_checksum'
> internally.
> +======================= ========================================================
>
^ permalink raw reply [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 29/44] docs: filesystems: convert ocfs2.txt to ReST
@ 2020-02-18 1:23 ` Joseph Qi
0 siblings, 0 replies; 112+ messages in thread
From: Joseph Qi @ 2020-02-18 1:23 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Mark Fasheh, Joel Becker, ocfs2-devel
On 20/2/18 00:12, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Looks good.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
> ---
> Documentation/filesystems/index.rst | 1 +
> .../filesystems/{ocfs2.txt => ocfs2.rst} | 31 +++++++++++++------
> 2 files changed, 22 insertions(+), 10 deletions(-)
> rename Documentation/filesystems/{ocfs2.txt => ocfs2.rst} (88%)
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index f3a26fdbd04f..3b2b07491c98 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -76,6 +76,7 @@ Documentation for filesystem implementations.
> nilfs2
> nfs/index
> ntfs
> + ocfs2
> ocfs2-online-filecheck
> overlayfs
> virtiofs
> diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.rst
> similarity index 88%
> rename from Documentation/filesystems/ocfs2.txt
> rename to Documentation/filesystems/ocfs2.rst
> index 4c49e5410595..412386bc6506 100644
> --- a/Documentation/filesystems/ocfs2.txt
> +++ b/Documentation/filesystems/ocfs2.rst
> @@ -1,5 +1,9 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +================
> OCFS2 filesystem
> -==================
> +================
> +
> OCFS2 is a general purpose extent based shared disk cluster file
> system with many similarities to ext3. It supports 64 bit inode
> numbers, and has automatically extending metadata groups which may
> @@ -14,22 +18,26 @@ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
>
> All code copyright 2005 Oracle except when otherwise noted.
>
> -CREDITS:
> +Credits
> +=======
> +
> Lots of code taken from ext3 and other projects.
>
> Authors in alphabetical order:
> -Joel Becker <joel.becker@oracle.com>
> -Zach Brown <zach.brown@oracle.com>
> -Mark Fasheh <mfasheh@suse.com>
> -Kurt Hackel <kurt.hackel@oracle.com>
> -Tao Ma <tao.ma@oracle.com>
> -Sunil Mushran <sunil.mushran@oracle.com>
> -Manish Singh <manish.singh@oracle.com>
> -Tiger Yang <tiger.yang@oracle.com>
> +
> +- Joel Becker <joel.becker@oracle.com>
> +- Zach Brown <zach.brown@oracle.com>
> +- Mark Fasheh <mfasheh@suse.com>
> +- Kurt Hackel <kurt.hackel@oracle.com>
> +- Tao Ma <tao.ma@oracle.com>
> +- Sunil Mushran <sunil.mushran@oracle.com>
> +- Manish Singh <manish.singh@oracle.com>
> +- Tiger Yang <tiger.yang@oracle.com>
>
> Caveats
> =======
> Features which OCFS2 does not support yet:
> +
> - Directory change notification (F_NOTIFY)
> - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
>
> @@ -37,8 +45,10 @@ Mount options
> =============
>
> OCFS2 supports the following mount options:
> +
> (*) == default
>
> +======================= ========================================================
> barrier=1 This enables/disables barriers. barrier=0 disables it,
> barrier=1 enables it.
> errors=remount-ro(*) Remount the filesystem read-only on an error.
> @@ -104,3 +114,4 @@ journal_async_commit Commit block can be written to disk without waiting
> for descriptor blocks. If enabled older kernels cannot
> mount the device. This will enable 'journal_checksum'
> internally.
> +======================= ========================================================
>
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 30/44] docs: filesystems: convert omfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (33 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
2020-02-18 0:57 ` Bob Copeland
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Bob Copeland, linux-karma-devel
- Add a SPDX header;
- Adjust document title;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
Documentation/filesystems/omfs.rst | 112 ++++++++++++++++++++++++++++
Documentation/filesystems/omfs.txt | 106 --------------------------
3 files changed, 113 insertions(+), 106 deletions(-)
create mode 100644 Documentation/filesystems/omfs.rst
delete mode 100644 Documentation/filesystems/omfs.txt
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 3b2b07491c98..fbee77175840 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -78,6 +78,7 @@ Documentation for filesystem implementations.
ntfs
ocfs2
ocfs2-online-filecheck
+ omfs
overlayfs
virtiofs
vfat
diff --git a/Documentation/filesystems/omfs.rst b/Documentation/filesystems/omfs.rst
new file mode 100644
index 000000000000..4c8bb3074169
--- /dev/null
+++ b/Documentation/filesystems/omfs.rst
@@ -0,0 +1,112 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+Optimized MPEG Filesystem (OMFS)
+================================
+
+Overview
+========
+
+OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR
+and Rio Karma MP3 player. The filesystem is extent-based, utilizing
+block sizes from 2k to 8k, with hash-based directories. This
+filesystem driver may be used to read and write disks from these
+devices.
+
+Note, it is not recommended that this FS be used in place of a general
+filesystem for your own streaming media device. Native Linux filesystems
+will likely perform better.
+
+More information is available at:
+
+ http://linux-karma.sf.net/
+
+Various utilities, including mkomfs and omfsck, are included with
+omfsprogs, available at:
+
+ http://bobcopeland.com/karma/
+
+Instructions are included in its README.
+
+Options
+=======
+
+OMFS supports the following mount-time options:
+
+ ============ ========================================
+ uid=n make all files owned by specified user
+ gid=n make all files owned by specified group
+ umask=xxx set permission umask to xxx
+ fmask=xxx set umask to xxx for files
+ dmask=xxx set umask to xxx for directories
+ ============ ========================================
+
+Disk format
+===========
+
+OMFS discriminates between "sysblocks" and normal data blocks. The sysblock
+group consists of super block information, file metadata, directory structures,
+and extents. Each sysblock has a header containing CRCs of the entire
+sysblock, and may be mirrored in successive blocks on the disk. A sysblock may
+have a smaller size than a data block, but since they are both addressed by the
+same 64-bit block number, any remaining space in the smaller sysblock is
+unused.
+
+Sysblock header information::
+
+ struct omfs_header {
+ __be64 h_self; /* FS block where this is located */
+ __be32 h_body_size; /* size of useful data after header */
+ __be16 h_crc; /* crc-ccitt of body_size bytes */
+ char h_fill1[2];
+ u8 h_version; /* version, always 1 */
+ char h_type; /* OMFS_INODE_X */
+ u8 h_magic; /* OMFS_IMAGIC */
+ u8 h_check_xor; /* XOR of header bytes before this */
+ __be32 h_fill2;
+ };
+
+Files and directories are both represented by omfs_inode::
+
+ struct omfs_inode {
+ struct omfs_header i_head; /* header */
+ __be64 i_parent; /* parent containing this inode */
+ __be64 i_sibling; /* next inode in hash bucket */
+ __be64 i_ctime; /* ctime, in milliseconds */
+ char i_fill1[35];
+ char i_type; /* OMFS_[DIR,FILE] */
+ __be32 i_fill2;
+ char i_fill3[64];
+ char i_name[OMFS_NAMELEN]; /* filename */
+ __be64 i_size; /* size of file, in bytes */
+ };
+
+Directories in OMFS are implemented as a large hash table. Filenames are
+hashed then prepended into the bucket list beginning at OMFS_DIR_START.
+Lookup requires hashing the filename, then seeking across i_sibling pointers
+until a match is found on i_name. Empty buckets are represented by block
+pointers with all-1s (~0).
+
+A file is an omfs_inode structure followed by an extent table beginning at
+OMFS_EXTENT_START::
+
+ struct omfs_extent_entry {
+ __be64 e_cluster; /* start location of a set of blocks */
+ __be64 e_blocks; /* number of blocks after e_cluster */
+ };
+
+ struct omfs_extent {
+ __be64 e_next; /* next extent table location */
+ __be32 e_extent_count; /* total # extents in this table */
+ __be32 e_fill;
+ struct omfs_extent_entry e_entry; /* start of extent entries */
+ };
+
+Each extent holds the block offset followed by number of blocks allocated to
+the extent. The final extent in each table is a terminator with e_cluster
+being ~0 and e_blocks being ones'-complement of the total number of blocks
+in the table.
+
+If this table overflows, a continuation inode is written and pointed to by
+e_next. These have a header but lack the rest of the inode structure.
+
diff --git a/Documentation/filesystems/omfs.txt b/Documentation/filesystems/omfs.txt
deleted file mode 100644
index 1d0d41ff5c65..000000000000
--- a/Documentation/filesystems/omfs.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-Optimized MPEG Filesystem (OMFS)
-
-Overview
-========
-
-OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR
-and Rio Karma MP3 player. The filesystem is extent-based, utilizing
-block sizes from 2k to 8k, with hash-based directories. This
-filesystem driver may be used to read and write disks from these
-devices.
-
-Note, it is not recommended that this FS be used in place of a general
-filesystem for your own streaming media device. Native Linux filesystems
-will likely perform better.
-
-More information is available at:
-
- http://linux-karma.sf.net/
-
-Various utilities, including mkomfs and omfsck, are included with
-omfsprogs, available at:
-
- http://bobcopeland.com/karma/
-
-Instructions are included in its README.
-
-Options
-=======
-
-OMFS supports the following mount-time options:
-
- uid=n - make all files owned by specified user
- gid=n - make all files owned by specified group
- umask=xxx - set permission umask to xxx
- fmask=xxx - set umask to xxx for files
- dmask=xxx - set umask to xxx for directories
-
-Disk format
-===========
-
-OMFS discriminates between "sysblocks" and normal data blocks. The sysblock
-group consists of super block information, file metadata, directory structures,
-and extents. Each sysblock has a header containing CRCs of the entire
-sysblock, and may be mirrored in successive blocks on the disk. A sysblock may
-have a smaller size than a data block, but since they are both addressed by the
-same 64-bit block number, any remaining space in the smaller sysblock is
-unused.
-
-Sysblock header information:
-
-struct omfs_header {
- __be64 h_self; /* FS block where this is located */
- __be32 h_body_size; /* size of useful data after header */
- __be16 h_crc; /* crc-ccitt of body_size bytes */
- char h_fill1[2];
- u8 h_version; /* version, always 1 */
- char h_type; /* OMFS_INODE_X */
- u8 h_magic; /* OMFS_IMAGIC */
- u8 h_check_xor; /* XOR of header bytes before this */
- __be32 h_fill2;
-};
-
-Files and directories are both represented by omfs_inode:
-
-struct omfs_inode {
- struct omfs_header i_head; /* header */
- __be64 i_parent; /* parent containing this inode */
- __be64 i_sibling; /* next inode in hash bucket */
- __be64 i_ctime; /* ctime, in milliseconds */
- char i_fill1[35];
- char i_type; /* OMFS_[DIR,FILE] */
- __be32 i_fill2;
- char i_fill3[64];
- char i_name[OMFS_NAMELEN]; /* filename */
- __be64 i_size; /* size of file, in bytes */
-};
-
-Directories in OMFS are implemented as a large hash table. Filenames are
-hashed then prepended into the bucket list beginning at OMFS_DIR_START.
-Lookup requires hashing the filename, then seeking across i_sibling pointers
-until a match is found on i_name. Empty buckets are represented by block
-pointers with all-1s (~0).
-
-A file is an omfs_inode structure followed by an extent table beginning at
-OMFS_EXTENT_START:
-
-struct omfs_extent_entry {
- __be64 e_cluster; /* start location of a set of blocks */
- __be64 e_blocks; /* number of blocks after e_cluster */
-};
-
-struct omfs_extent {
- __be64 e_next; /* next extent table location */
- __be32 e_extent_count; /* total # extents in this table */
- __be32 e_fill;
- struct omfs_extent_entry e_entry; /* start of extent entries */
-};
-
-Each extent holds the block offset followed by number of blocks allocated to
-the extent. The final extent in each table is a terminator with e_cluster
-being ~0 and e_blocks being ones'-complement of the total number of blocks
-in the table.
-
-If this table overflows, a continuation inode is written and pointed to by
-e_next. These have a header but lack the rest of the inode structure.
-
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 31/44] docs: filesystems: convert orangefs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (34 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Mike Marshall, Martin Brandenburg, devel
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../{orangefs.txt => orangefs.rst} | 187 ++++++++++--------
2 files changed, 107 insertions(+), 81 deletions(-)
rename Documentation/filesystems/{orangefs.txt => orangefs.rst} (83%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index fbee77175840..fed53f831192 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -79,6 +79,7 @@ Documentation for filesystem implementations.
ocfs2
ocfs2-online-filecheck
omfs
+ orangefs
overlayfs
virtiofs
vfat
diff --git a/Documentation/filesystems/orangefs.txt b/Documentation/filesystems/orangefs.rst
similarity index 83%
rename from Documentation/filesystems/orangefs.txt
rename to Documentation/filesystems/orangefs.rst
index f4ba94950e3f..7d6d4cad73c4 100644
--- a/Documentation/filesystems/orangefs.txt
+++ b/Documentation/filesystems/orangefs.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
ORANGEFS
========
@@ -21,25 +24,25 @@ Orangefs features include:
* Stateless
-MAILING LIST ARCHIVES
+Mailing List Archives
=====================
http://lists.orangefs.org/pipermail/devel_lists.orangefs.org/
-MAILING LIST SUBMISSIONS
+Mailing List Submissions
========================
devel@lists.orangefs.org
-DOCUMENTATION
+Documentation
=============
http://www.orangefs.org/documentation/
-USERSPACE FILESYSTEM SOURCE
+Userspace Filesystem Source
===========================
http://www.orangefs.org/download
@@ -48,16 +51,16 @@ Orangefs versions prior to 2.9.3 would not be compatible with the
upstream version of the kernel client.
-RUNNING ORANGEFS ON A SINGLE SERVER
+Running ORANGEFS On a Single Server
===================================
OrangeFS is usually run in large installations with multiple servers and
clients, but a complete filesystem can be run on a single machine for
development and testing.
-On Fedora, install orangefs and orangefs-server.
+On Fedora, install orangefs and orangefs-server::
-dnf -y install orangefs orangefs-server
+ dnf -y install orangefs orangefs-server
There is an example server configuration file in
/etc/orangefs/orangefs.conf. Change localhost to your hostname if
@@ -70,29 +73,29 @@ single line. Uncomment it and change the hostname if necessary. This
controls clients which use libpvfs2. This does not control the
pvfs2-client-core.
-Create the filesystem.
+Create the filesystem::
-pvfs2-server -f /etc/orangefs/orangefs.conf
+ pvfs2-server -f /etc/orangefs/orangefs.conf
-Start the server.
+Start the server::
-systemctl start orangefs-server
+ systemctl start orangefs-server
-Test the server.
+Test the server::
-pvfs2-ping -m /pvfsmnt
+ pvfs2-ping -m /pvfsmnt
Start the client. The module must be compiled in or loaded before this
-point.
+point::
-systemctl start orangefs-client
+ systemctl start orangefs-client
-Mount the filesystem.
+Mount the filesystem::
-mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
+ mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
-BUILDING ORANGEFS ON A SINGLE SERVER
+Building ORANGEFS on a Single Server
====================================
Where OrangeFS cannot be installed from distribution packages, it may be
@@ -102,49 +105,51 @@ You can omit --prefix if you don't care that things are sprinkled around
in /usr/local. As of version 2.9.6, OrangeFS uses Berkeley DB by
default, we will probably be changing the default to LMDB soon.
-./configure --prefix=/opt/ofs --with-db-backend=lmdb
+::
-make
+ ./configure --prefix=/opt/ofs --with-db-backend=lmdb
-make install
+ make
-Create an orangefs config file.
+ make install
-/opt/ofs/bin/pvfs2-genconfig /etc/pvfs2.conf
+Create an orangefs config file::
-Create an /etc/pvfs2tab file.
+ /opt/ofs/bin/pvfs2-genconfig /etc/pvfs2.conf
-echo tcp://localhost:3334/orangefs /pvfsmnt pvfs2 defaults,noauto 0 0 > \
- /etc/pvfs2tab
+Create an /etc/pvfs2tab file::
-Create the mount point you specified in the tab file if needed.
+ echo tcp://localhost:3334/orangefs /pvfsmnt pvfs2 defaults,noauto 0 0 > \
+ /etc/pvfs2tab
-mkdir /pvfsmnt
+Create the mount point you specified in the tab file if needed::
-Bootstrap the server.
+ mkdir /pvfsmnt
-/opt/ofs/sbin/pvfs2-server -f /etc/pvfs2.conf
+Bootstrap the server::
-Start the server.
+ /opt/ofs/sbin/pvfs2-server -f /etc/pvfs2.conf
-/opt/osf/sbin/pvfs2-server /etc/pvfs2.conf
+Start the server::
+
+ /opt/osf/sbin/pvfs2-server /etc/pvfs2.conf
Now the server should be running. Pvfs2-ls is a simple
-test to verify that the server is running.
+test to verify that the server is running::
-/opt/ofs/bin/pvfs2-ls /pvfsmnt
+ /opt/ofs/bin/pvfs2-ls /pvfsmnt
If stuff seems to be working, load the kernel module and
-turn on the client core.
+turn on the client core::
-/opt/ofs/sbin/pvfs2-client -p /opt/osf/sbin/pvfs2-client-core
+ /opt/ofs/sbin/pvfs2-client -p /opt/osf/sbin/pvfs2-client-core
-Mount your filesystem.
+Mount your filesystem::
-mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
+ mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt
-RUNNING XFSTESTS
+Running xfstests
================
It is useful to use a scratch filesystem with xfstests. This can be
@@ -159,21 +164,23 @@ Then there are two FileSystem sections: orangefs and scratch.
This change should be made before creating the filesystem.
-pvfs2-server -f /etc/orangefs/orangefs.conf
+::
-To run xfstests, create /etc/xfsqa.config.
+ pvfs2-server -f /etc/orangefs/orangefs.conf
-TEST_DIR=/orangefs
-TEST_DEV=tcp://localhost:3334/orangefs
-SCRATCH_MNT=/scratch
-SCRATCH_DEV=tcp://localhost:3334/scratch
+To run xfstests, create /etc/xfsqa.config::
-Then xfstests can be run
+ TEST_DIR=/orangefs
+ TEST_DEV=tcp://localhost:3334/orangefs
+ SCRATCH_MNT=/scratch
+ SCRATCH_DEV=tcp://localhost:3334/scratch
-./check -pvfs2
+Then xfstests can be run::
+ ./check -pvfs2
-OPTIONS
+
+Options
=======
The following mount options are accepted:
@@ -193,32 +200,32 @@ The following mount options are accepted:
Distributed locking is being worked on for the future.
-DEBUGGING
+Debugging
=========
If you want the debug (GOSSIP) statements in a particular
-source file (inode.c for example) go to syslog:
+source file (inode.c for example) go to syslog::
echo inode > /sys/kernel/debug/orangefs/kernel-debug
-No debugging (the default):
+No debugging (the default)::
echo none > /sys/kernel/debug/orangefs/kernel-debug
-Debugging from several source files:
+Debugging from several source files::
echo inode,dir > /sys/kernel/debug/orangefs/kernel-debug
-All debugging:
+All debugging::
echo all > /sys/kernel/debug/orangefs/kernel-debug
-Get a list of all debugging keywords:
+Get a list of all debugging keywords::
cat /sys/kernel/debug/orangefs/debug-help
-PROTOCOL BETWEEN KERNEL MODULE AND USERSPACE
+Protocol between Kernel Module and Userspace
============================================
Orangefs is a user space filesystem and an associated kernel module.
@@ -234,7 +241,8 @@ The kernel module implements a pseudo device that userspace
can read from and write to. Userspace can also manipulate the
kernel module through the pseudo device with ioctl.
-THE BUFMAP:
+The Bufmap
+----------
At startup userspace allocates two page-size-aligned (posix_memalign)
mlocked memory buffers, one is used for IO and one is used for readdir
@@ -250,7 +258,8 @@ copied from user space to kernel space with copy_from_user and is used
to initialize the kernel module's "bufmap" (struct orangefs_bufmap), which
then contains:
- * refcnt - a reference counter
+ * refcnt
+ - a reference counter
* desc_size - PVFS2_BUFMAP_DEFAULT_DESC_SIZE (4194304) - the IO buffer's
partition size, which represents the filesystem's block size and
is used for s_blocksize in super blocks.
@@ -259,17 +268,19 @@ then contains:
* desc_shift - log2(desc_size), used for s_blocksize_bits in super blocks.
* total_size - the total size of the IO buffer.
* page_count - the number of 4096 byte pages in the IO buffer.
- * page_array - a pointer to page_count * (sizeof(struct page*)) bytes
+ * page_array - a pointer to ``page_count * (sizeof(struct page*))`` bytes
of kcalloced memory. This memory is used as an array of pointers
to each of the pages in the IO buffer through a call to get_user_pages.
- * desc_array - a pointer to desc_count * (sizeof(struct orangefs_bufmap_desc))
+ * desc_array - a pointer to ``desc_count * (sizeof(struct orangefs_bufmap_desc))``
bytes of kcalloced memory. This memory is further intialized:
user_desc is the kernel's copy of the IO buffer's ORANGEFS_dev_map_desc
structure. user_desc->ptr points to the IO buffer.
- pages_per_desc = bufmap->desc_size / PAGE_SIZE
- offset = 0
+ ::
+
+ pages_per_desc = bufmap->desc_size / PAGE_SIZE
+ offset = 0
bufmap->desc_array[0].page_array = &bufmap->page_array[offset]
bufmap->desc_array[0].array_count = pages_per_desc = 1024
@@ -293,7 +304,8 @@ then contains:
* readdir_index_lock - a spinlock to protect readdir_index_array during
update.
-OPERATIONS:
+Operations
+----------
The kernel module builds an "op" (struct orangefs_kernel_op_s) when it
needs to communicate with userspace. Part of the op contains the "upcall"
@@ -308,13 +320,19 @@ in flight at any given time.
Ops are stateful:
- * unknown - op was just initialized
- * waiting - op is on request_list (upward bound)
- * inprogr - op is in progress (waiting for downcall)
- * serviced - op has matching downcall; ok
- * purged - op has to start a timer since client-core
+ * unknown
+ - op was just initialized
+ * waiting
+ - op is on request_list (upward bound)
+ * inprogr
+ - op is in progress (waiting for downcall)
+ * serviced
+ - op has matching downcall; ok
+ * purged
+ - op has to start a timer since client-core
exited uncleanly before servicing op
- * given up - submitter has given up waiting for it
+ * given up
+ - submitter has given up waiting for it
When some arbitrary userspace program needs to perform a
filesystem operation on Orangefs (readdir, I/O, create, whatever)
@@ -389,10 +407,15 @@ union of structs, each of which is associated with a particular
response type.
The several members outside of the union are:
- - int32_t type - type of operation.
- - int32_t status - return code for the operation.
- - int64_t trailer_size - 0 unless readdir operation.
- - char *trailer_buf - initialized to NULL, used during readdir operations.
+
+ ``int32_t type``
+ - type of operation.
+ ``int32_t status``
+ - return code for the operation.
+ ``int64_t trailer_size``
+ - 0 unless readdir operation.
+ ``char *trailer_buf``
+ - initialized to NULL, used during readdir operations.
The appropriate member inside the union is filled out for any
particular response.
@@ -449,18 +472,20 @@ Userspace uses writev() on /dev/pvfs2-req to pass responses to the requests
made by the kernel side.
A buffer_list containing:
+
- a pointer to the prepared response to the request from the
kernel (struct pvfs2_downcall_t).
- and also, in the case of a readdir request, a pointer to a
buffer containing descriptors for the objects in the target
directory.
+
... is sent to the function (PINT_dev_write_list) which performs
the writev.
PINT_dev_write_list has a local iovec array: struct iovec io_array[10];
The first four elements of io_array are initialized like this for all
-responses:
+responses::
io_array[0].iov_base = address of local variable "proto_ver" (int32_t)
io_array[0].iov_len = sizeof(int32_t)
@@ -475,7 +500,7 @@ responses:
of global variable vfs_request (vfs_request_t)
io_array[3].iov_len = sizeof(pvfs2_downcall_t)
-Readdir responses initialize the fifth element io_array like this:
+Readdir responses initialize the fifth element io_array like this::
io_array[4].iov_base = contents of member trailer_buf (char *)
from out_downcall member of global variable
@@ -517,13 +542,13 @@ from a dentry is cheap, obtaining it from userspace is relatively expensive,
hence the motivation to use the dentry when possible.
The timeout values d_time and getattr_time are jiffy based, and the
-code is designed to avoid the jiffy-wrap problem:
+code is designed to avoid the jiffy-wrap problem::
-"In general, if the clock may have wrapped around more than once, there
-is no way to tell how much time has elapsed. However, if the times t1
-and t2 are known to be fairly close, we can reliably compute the
-difference in a way that takes into account the possibility that the
-clock may have wrapped between times."
+ "In general, if the clock may have wrapped around more than once, there
+ is no way to tell how much time has elapsed. However, if the times t1
+ and t2 are known to be fairly close, we can reliably compute the
+ difference in a way that takes into account the possibility that the
+ clock may have wrapped between times."
- from course notes by instructor Andy Wang
+from course notes by instructor Andy Wang
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 33/44] docs: filesystems: convert qnx6.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (35 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{qnx6.txt => qnx6.rst} | 22 +++++++++++++++++++
2 files changed, 23 insertions(+)
rename Documentation/filesystems/{qnx6.txt => qnx6.rst} (98%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 671906e2fee6..08883a481a76 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -82,5 +82,6 @@ Documentation for filesystem implementations.
orangefs
overlayfs
proc
+ qnx6
virtiofs
vfat
diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.rst
similarity index 98%
rename from Documentation/filesystems/qnx6.txt
rename to Documentation/filesystems/qnx6.rst
index 48ea68f15845..b71308314070 100644
--- a/Documentation/filesystems/qnx6.txt
+++ b/Documentation/filesystems/qnx6.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
The QNX6 Filesystem
===================
@@ -14,10 +17,12 @@ Specification
qnx6fs shares many properties with traditional Unix filesystems. It has the
concepts of blocks, inodes and directories.
+
On QNX it is possible to create little endian and big endian qnx6 filesystems.
This feature makes it possible to create and use a different endianness fs
for the target (QNX is used on quite a range of embedded systems) platform
running on a different endianness.
+
The Linux driver handles endianness transparently. (LE and BE)
Blocks
@@ -26,6 +31,7 @@ Blocks
The space in the device or file is split up into blocks. These are a fixed
size of 512, 1024, 2048 or 4096, which is decided when the filesystem is
created.
+
Blockpointers are 32bit, so the maximum space that can be addressed is
2^32 * 4096 bytes or 16TB
@@ -50,6 +56,7 @@ Each of these root nodes holds information like total size of the stored
data and the addressing levels in that specific tree.
If the level value is 0, up to 16 direct blocks can be addressed by each
node.
+
Level 1 adds an additional indirect addressing level where each indirect
addressing block holds up to blocksize / 4 bytes pointers to data blocks.
Level 2 adds an additional indirect addressing block level (so, already up
@@ -57,11 +64,13 @@ to 16 * 256 * 256 = 1048576 blocks that can be addressed by such a tree).
Unused block pointers are always set to ~0 - regardless of root node,
indirect addressing blocks or inodes.
+
Data leaves are always on the lowest level. So no data is stored on upper
tree levels.
The first Superblock is located at 0x2000. (0x2000 is the bootblock size)
The Audi MMI 3G first superblock directly starts at byte 0.
+
Second superblock position can either be calculated from the superblock
information (total number of filesystem blocks) or by taking the highest
device address, zeroing the last 3 bytes and then subtracting 0x1000 from
@@ -84,6 +93,7 @@ Object mode field is POSIX format. (which makes things easier)
There are also pointers to the first 16 blocks, if the object data can be
addressed with 16 direct blocks.
+
For more than 16 blocks an indirect addressing in form of another tree is
used. (scheme is the same as the one used for the superblock root nodes)
@@ -96,13 +106,18 @@ Directories
A directory is a filesystem object and has an inode just like a file.
It is a specially formatted file containing records which associate each
name with an inode number.
+
'.' inode number points to the directory inode
+
'..' inode number points to the parent directory inode
+
Eeach filename record additionally got a filename length field.
One special case are long filenames or subdirectory names.
+
These got set a filename length field of 0xff in the corresponding directory
record plus the longfile inode number also stored in that record.
+
With that longfilename inode number, the longfilename tree can be walked
starting with the superblock longfilename root node pointers.
@@ -111,6 +126,7 @@ Special files
Symbolic links are also filesystem objects with inodes. They got a specific
bit in the inode mode field identifying them as symbolic link.
+
The directory entry file inode pointer points to the target file inode.
Hard links got an inode, a directory entry, but a specific mode bit set,
@@ -126,9 +142,11 @@ Long filenames
Long filenames are stored in a separate addressing tree. The staring point
is the longfilename root node in the active superblock.
+
Each data block (tree leaves) holds one long filename. That filename is
limited to 510 bytes. The first two starting bytes are used as length field
for the actual filename.
+
If that structure shall fit for all allowed blocksizes, it is clear why there
is a limit of 510 bytes for the actual filename stored.
@@ -138,6 +156,7 @@ Bitmap
The qnx6fs filesystem allocation bitmap is stored in a tree under bitmap
root node in the superblock and each bit in the bitmap represents one
filesystem block.
+
The first block is block 0, which starts 0x1000 after superblock start.
So for a normal qnx6fs 0x3000 (bootblock + superblock) is the physical
address at which block 0 is located.
@@ -149,11 +168,14 @@ Bitmap system area
------------------
The bitmap itself is divided into three parts.
+
First the system area, that is split into two halves.
+
Then userspace.
The requirement for a static, fixed preallocated system area comes from how
qnx6fs deals with writes.
+
Each superblock got it's own half of the system area. So superblock #1
always uses blocks from the lower half while superblock #2 just writes to
blocks represented by the upper half bitmap system area bits.
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 34/44] docs: filesystems: convert ramfs-rootfs-initramfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (36 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Use notes markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
...itramfs.txt => ramfs-rootfs-initramfs.rst} | 54 +++++++++++--------
2 files changed, 33 insertions(+), 22 deletions(-)
rename Documentation/filesystems/{ramfs-rootfs-initramfs.txt => ramfs-rootfs-initramfs.rst} (91%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 08883a481a76..b8689d082911 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -83,5 +83,6 @@ Documentation for filesystem implementations.
overlayfs
proc
qnx6
+ ramfs-rootfs-initramfs
virtiofs
vfat
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.rst
similarity index 91%
rename from Documentation/filesystems/ramfs-rootfs-initramfs.txt
rename to Documentation/filesystems/ramfs-rootfs-initramfs.rst
index 97d42ccaa92d..6c576e241d86 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@@ -1,5 +1,11 @@
-ramfs, rootfs and initramfs
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Ramfs, rootfs and initramfs
+===========================
+
October 17, 2005
+
Rob Landley <rob@landley.net>
=============================
@@ -99,14 +105,14 @@ out of that.
All this differs from the old initrd in several ways:
- The old initrd was always a separate file, while the initramfs archive is
- linked into the linux kernel image. (The directory linux-*/usr is devoted
- to generating this archive during the build.)
+ linked into the linux kernel image. (The directory ``linux-*/usr`` is
+ devoted to generating this archive during the build.)
- The old initrd file was a gzipped filesystem image (in some file format,
such as ext2, that needed a driver built into the kernel), while the new
initramfs archive is a gzipped cpio archive (like tar only simpler,
- see cpio(1) and Documentation/driver-api/early-userspace/buffer-format.rst). The
- kernel's cpio extraction code is not only extremely small, it's also
+ see cpio(1) and Documentation/driver-api/early-userspace/buffer-format.rst).
+ The kernel's cpio extraction code is not only extremely small, it's also
__init text and data that can be discarded during the boot process.
- The program run by the old initrd (which was called /initrd, not /init) did
@@ -139,7 +145,7 @@ and living in usr/Kconfig) can be used to specify a source for the
initramfs archive, which will automatically be incorporated into the
resulting binary. This option can point to an existing gzipped cpio
archive, a directory containing files to be archived, or a text file
-specification such as the following example:
+specification such as the following example::
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
@@ -175,12 +181,12 @@ or extracting your own preprepared cpio files to feed to the kernel build
(instead of a config file or directory).
The following command line can extract a cpio image (either by the above script
-or by the kernel build) back into its component files:
+or by the kernel build) back into its component files::
cpio -i -d -H newc -F initramfs_data.cpio --no-absolute-filenames
The following shell script can create a prebuilt cpio archive you can
-use in place of the above config file:
+use in place of the above config file::
#!/bin/sh
@@ -202,14 +208,17 @@ use in place of the above config file:
exit 1
fi
-Note: The cpio man page contains some bad advice that will break your initramfs
-archive if you follow it. It says "A typical way to generate the list
-of filenames is with the find command; you should give find the -depth option
-to minimize problems with permissions on directories that are unwritable or not
-searchable." Don't do this when creating initramfs.cpio.gz images, it won't
-work. The Linux kernel cpio extractor won't create files in a directory that
-doesn't exist, so the directory entries must go before the files that go in
-those directories. The above script gets them in the right order.
+.. Note::
+
+ The cpio man page contains some bad advice that will break your initramfs
+ archive if you follow it. It says "A typical way to generate the list
+ of filenames is with the find command; you should give find the -depth
+ option to minimize problems with permissions on directories that are
+ unwritable or not searchable." Don't do this when creating
+ initramfs.cpio.gz images, it won't work. The Linux kernel cpio extractor
+ won't create files in a directory that doesn't exist, so the directory
+ entries must go before the files that go in those directories.
+ The above script gets them in the right order.
External initramfs images:
--------------------------
@@ -236,9 +245,10 @@ An initramfs archive is a complete self-contained root filesystem for Linux.
If you don't already understand what shared libraries, devices, and paths
you need to get a minimal root filesystem up and running, here are some
references:
-http://www.tldp.org/HOWTO/Bootdisk-HOWTO/
-http://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html
-http://www.linuxfromscratch.org/lfs/view/stable/
+
+- http://www.tldp.org/HOWTO/Bootdisk-HOWTO/
+- http://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html
+- http://www.linuxfromscratch.org/lfs/view/stable/
The "klibc" package (http://www.kernel.org/pub/linux/libs/klibc) is
designed to be a tiny C library to statically link early userspace
@@ -255,7 +265,7 @@ name lookups, even when otherwise statically linked.)
A good first step is to get initramfs to run a statically linked "hello world"
program as init, and test it under an emulator like qemu (www.qemu.org) or
-User Mode Linux, like so:
+User Mode Linux, like so::
cat > hello.c << EOF
#include <stdio.h>
@@ -326,8 +336,8 @@ the above threads) is:
explained his reasoning:
- http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1550.html
- http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1638.html
+ - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1550.html
+ - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1638.html
and, most importantly, designed and implemented the initramfs code.
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 35/44] docs: filesystems: convert relay.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (37 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Use notes markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{relay.txt => relay.rst} | 129 +++++++++---------
2 files changed, 69 insertions(+), 61 deletions(-)
rename Documentation/filesystems/{relay.txt => relay.rst} (91%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index b8689d082911..0aade8146d4d 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -84,5 +84,6 @@ Documentation for filesystem implementations.
proc
qnx6
ramfs-rootfs-initramfs
+ relay
virtiofs
vfat
diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.rst
similarity index 91%
rename from Documentation/filesystems/relay.txt
rename to Documentation/filesystems/relay.rst
index cd709a94d054..04ad083cfe62 100644
--- a/Documentation/filesystems/relay.txt
+++ b/Documentation/filesystems/relay.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
relay interface (formerly relayfs)
==================================
@@ -108,6 +111,7 @@ The relay interface implements basic file operations for user space
access to relay channel buffer data. Here are the file operations
that are available and some comments regarding their behavior:
+=========== ============================================================
open() enables user to open an _existing_ channel buffer.
mmap() results in channel buffer being mapped into the caller's
@@ -136,13 +140,16 @@ poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are
close() decrements the channel buffer's refcount. When the refcount
reaches 0, i.e. when no process or kernel client has the
buffer open, the channel buffer is freed.
+=========== ============================================================
In order for a user application to make use of relay files, the
-host filesystem must be mounted. For example,
+host filesystem must be mounted. For example::
mount -t debugfs debugfs /sys/kernel/debug
-NOTE: the host filesystem doesn't need to be mounted for kernel
+.. Note::
+
+ the host filesystem doesn't need to be mounted for kernel
clients to create or use channels - it only needs to be
mounted when user space applications need access to the buffer
data.
@@ -154,7 +161,7 @@ The relay interface kernel API
Here's a summary of the API the relay interface provides to in-kernel clients:
TBD(curr. line MT:/API/)
- channel management functions:
+ channel management functions::
relay_open(base_filename, parent, subbuf_size, n_subbufs,
callbacks, private_data)
@@ -162,17 +169,17 @@ TBD(curr. line MT:/API/)
relay_flush(chan)
relay_reset(chan)
- channel management typically called on instigation of userspace:
+ channel management typically called on instigation of userspace::
relay_subbufs_consumed(chan, cpu, subbufs_consumed)
- write functions:
+ write functions::
relay_write(chan, data, length)
__relay_write(chan, data, length)
relay_reserve(chan, length)
- callbacks:
+ callbacks::
subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
buf_mapped(buf, filp)
@@ -180,7 +187,7 @@ TBD(curr. line MT:/API/)
create_buf_file(filename, parent, mode, buf, is_global)
remove_buf_file(dentry)
- helper functions:
+ helper functions::
relay_buf_full(buf)
subbuf_start_reserve(buf, length)
@@ -215,41 +222,41 @@ the file(s) created in create_buf_file() and is called during
relay_close().
Here are some typical definitions for these callbacks, in this case
-using debugfs:
+using debugfs::
-/*
- * create_buf_file() callback. Creates relay file in debugfs.
- */
-static struct dentry *create_buf_file_handler(const char *filename,
- struct dentry *parent,
- umode_t mode,
- struct rchan_buf *buf,
- int *is_global)
-{
- return debugfs_create_file(filename, mode, parent, buf,
- &relay_file_operations);
-}
+ /*
+ * create_buf_file() callback. Creates relay file in debugfs.
+ */
+ static struct dentry *create_buf_file_handler(const char *filename,
+ struct dentry *parent,
+ umode_t mode,
+ struct rchan_buf *buf,
+ int *is_global)
+ {
+ return debugfs_create_file(filename, mode, parent, buf,
+ &relay_file_operations);
+ }
-/*
- * remove_buf_file() callback. Removes relay file from debugfs.
- */
-static int remove_buf_file_handler(struct dentry *dentry)
-{
- debugfs_remove(dentry);
+ /*
+ * remove_buf_file() callback. Removes relay file from debugfs.
+ */
+ static int remove_buf_file_handler(struct dentry *dentry)
+ {
+ debugfs_remove(dentry);
- return 0;
-}
+ return 0;
+ }
-/*
- * relay interface callbacks
- */
-static struct rchan_callbacks relay_callbacks =
-{
- .create_buf_file = create_buf_file_handler,
- .remove_buf_file = remove_buf_file_handler,
-};
+ /*
+ * relay interface callbacks
+ */
+ static struct rchan_callbacks relay_callbacks =
+ {
+ .create_buf_file = create_buf_file_handler,
+ .remove_buf_file = remove_buf_file_handler,
+ };
-And an example relay_open() invocation using them:
+And an example relay_open() invocation using them::
chan = relay_open("cpu", NULL, SUBBUF_SIZE, N_SUBBUFS, &relay_callbacks, NULL);
@@ -339,23 +346,23 @@ whether or not to actually move on to the next sub-buffer.
To implement 'no-overwrite' mode, the userspace client would provide
an implementation of the subbuf_start() callback something like the
-following:
+following::
-static int subbuf_start(struct rchan_buf *buf,
- void *subbuf,
- void *prev_subbuf,
- unsigned int prev_padding)
-{
- if (prev_subbuf)
- *((unsigned *)prev_subbuf) = prev_padding;
+ static int subbuf_start(struct rchan_buf *buf,
+ void *subbuf,
+ void *prev_subbuf,
+ unsigned int prev_padding)
+ {
+ if (prev_subbuf)
+ *((unsigned *)prev_subbuf) = prev_padding;
- if (relay_buf_full(buf))
- return 0;
+ if (relay_buf_full(buf))
+ return 0;
- subbuf_start_reserve(buf, sizeof(unsigned int));
+ subbuf_start_reserve(buf, sizeof(unsigned int));
- return 1;
-}
+ return 1;
+ }
If the current buffer is full, i.e. all sub-buffers remain unconsumed,
the callback returns 0 to indicate that the buffer switch should not
@@ -370,20 +377,20 @@ ready sub-buffers will relay_buf_full() return 0, in which case the
buffer switch can continue.
The implementation of the subbuf_start() callback for 'overwrite' mode
-would be very similar:
+would be very similar::
-static int subbuf_start(struct rchan_buf *buf,
- void *subbuf,
- void *prev_subbuf,
- size_t prev_padding)
-{
- if (prev_subbuf)
- *((unsigned *)prev_subbuf) = prev_padding;
+ static int subbuf_start(struct rchan_buf *buf,
+ void *subbuf,
+ void *prev_subbuf,
+ size_t prev_padding)
+ {
+ if (prev_subbuf)
+ *((unsigned *)prev_subbuf) = prev_padding;
- subbuf_start_reserve(buf, sizeof(unsigned int));
+ subbuf_start_reserve(buf, sizeof(unsigned int));
- return 1;
-}
+ return 1;
+ }
In this case, the relay_buf_full() check is meaningless and the
callback always returns 1, causing the buffer switch to occur
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 36/44] docs: filesystems: convert romfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (38 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{romfs.txt => romfs.rst} | 42 +++++++++++--------
2 files changed, 26 insertions(+), 17 deletions(-)
rename Documentation/filesystems/{romfs.txt => romfs.rst} (86%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 0aade8146d4d..3b26639517af 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -85,5 +85,6 @@ Documentation for filesystem implementations.
qnx6
ramfs-rootfs-initramfs
relay
+ romfs
virtiofs
vfat
diff --git a/Documentation/filesystems/romfs.txt b/Documentation/filesystems/romfs.rst
similarity index 86%
rename from Documentation/filesystems/romfs.txt
rename to Documentation/filesystems/romfs.rst
index e2b07cc9120a..465b11efa9be 100644
--- a/Documentation/filesystems/romfs.txt
+++ b/Documentation/filesystems/romfs.rst
@@ -1,4 +1,8 @@
-ROMFS - ROM FILE SYSTEM
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+ROMFS - ROM File System
+=======================
This is a quite dumb, read only filesystem, mainly for initial RAM
disks of installation disks. It has grown up by the need of having
@@ -51,9 +55,9 @@ the 16 byte padding for the name and the contents, also 16+14+15 = 45
bytes. This is quite rare however, since most file names are longer
than 3 bytes, and shorter than 15 bytes.
-The layout of the filesystem is the following:
+The layout of the filesystem is the following::
-offset content
+ offset content
+---+---+---+---+
0 | - | r | o | m | \
@@ -84,9 +88,9 @@ the source. This algorithm was chosen because although it's not quite
reliable, it does not require any tables, and it is very simple.
The following bytes are now part of the file system; each file header
-must begin on a 16 byte boundary.
+must begin on a 16 byte boundary::
-offset content
+ offset content
+---+---+---+---+
0 | next filehdr|X| The offset of the next file header
@@ -114,7 +118,9 @@ file is user and group 0, this should never be a problem for the
intended use. The mapping of the 8 possible values to file types is
the following:
+== =============== ============================================
mapping spec.info means
+== =============== ============================================
0 hard link link destination [file header]
1 directory first file's header
2 regular file unused, must be zero [MBZ]
@@ -123,6 +129,7 @@ the following:
5 char device - " -
6 socket unused, MBZ
7 fifo unused, MBZ
+== =============== ============================================
Note that hard links are specifically marked in this filesystem, but
they will behave as you can expect (i.e. share the inode number).
@@ -158,24 +165,24 @@ to romfs-subscribe@shadow.banki.hu, the content is irrelevant.
Pending issues:
- Permissions and owner information are pretty essential features of a
-Un*x like system, but romfs does not provide the full possibilities.
-I have never found this limiting, but others might.
+ Un*x like system, but romfs does not provide the full possibilities.
+ I have never found this limiting, but others might.
- The file system is read only, so it can be very small, but in case
-one would want to write _anything_ to a file system, he still needs
-a writable file system, thus negating the size advantages. Possible
-solutions: implement write access as a compile-time option, or a new,
-similarly small writable filesystem for RAM disks.
+ one would want to write _anything_ to a file system, he still needs
+ a writable file system, thus negating the size advantages. Possible
+ solutions: implement write access as a compile-time option, or a new,
+ similarly small writable filesystem for RAM disks.
- Since the files are only required to have alignment on a 16 byte
-boundary, it is currently possibly suboptimal to read or execute files
-from the filesystem. It might be resolved by reordering file data to
-have most of it (i.e. except the start and the end) laying at "natural"
-boundaries, thus it would be possible to directly map a big portion of
-the file contents to the mm subsystem.
+ boundary, it is currently possibly suboptimal to read or execute files
+ from the filesystem. It might be resolved by reordering file data to
+ have most of it (i.e. except the start and the end) laying at "natural"
+ boundaries, thus it would be possible to directly map a big portion of
+ the file contents to the mm subsystem.
- Compression might be an useful feature, but memory is quite a
-limiting factor in my eyes.
+ limiting factor in my eyes.
- Where it is used?
@@ -183,4 +190,5 @@ limiting factor in my eyes.
Have fun,
+
Janos Farkas <chexum@shadow.banki.hu>
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 37/44] docs: filesystems: convert squashfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (39 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Phillip Lougher
- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../{squashfs.txt => squashfs.rst} | 60 ++++++++++---------
2 files changed, 34 insertions(+), 27 deletions(-)
rename Documentation/filesystems/{squashfs.txt => squashfs.rst} (91%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 3b26639517af..97a5f65ae509 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -86,5 +86,6 @@ Documentation for filesystem implementations.
ramfs-rootfs-initramfs
relay
romfs
+ squashfs
virtiofs
vfat
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.rst
similarity index 91%
rename from Documentation/filesystems/squashfs.txt
rename to Documentation/filesystems/squashfs.rst
index e5274f84dc56..df42106bae71 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.rst
@@ -1,7 +1,11 @@
-SQUASHFS 4.0 FILESYSTEM
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Squashfs 4.0 Filesystem
=======================
Squashfs is a compressed read-only filesystem for Linux.
+
It uses zlib, lz4, lzo, or xz compression to compress files, inodes and
directories. Inodes in the system are very small and all blocks are packed to
minimise data overhead. Block sizes greater than 4K are supported up to a
@@ -15,31 +19,33 @@ needed.
Mailing list: squashfs-devel@lists.sourceforge.net
Web site: www.squashfs.org
-1. FILESYSTEM FEATURES
+1. Filesystem Features
----------------------
Squashfs filesystem features versus Cramfs:
+============================== ========= ==========
Squashfs Cramfs
-
-Max filesystem size: 2^64 256 MiB
-Max file size: ~ 2 TiB 16 MiB
-Max files: unlimited unlimited
-Max directories: unlimited unlimited
-Max entries per directory: unlimited unlimited
-Max block size: 1 MiB 4 KiB
-Metadata compression: yes no
-Directory indexes: yes no
-Sparse file support: yes no
-Tail-end packing (fragments): yes no
-Exportable (NFS etc.): yes no
-Hard link support: yes no
-"." and ".." in readdir: yes no
-Real inode numbers: yes no
-32-bit uids/gids: yes no
-File creation time: yes no
-Xattr support: yes no
-ACL support: no no
+============================== ========= ==========
+Max filesystem size 2^64 256 MiB
+Max file size ~ 2 TiB 16 MiB
+Max files unlimited unlimited
+Max directories unlimited unlimited
+Max entries per directory unlimited unlimited
+Max block size 1 MiB 4 KiB
+Metadata compression yes no
+Directory indexes yes no
+Sparse file support yes no
+Tail-end packing (fragments) yes no
+Exportable (NFS etc.) yes no
+Hard link support yes no
+"." and ".." in readdir yes no
+Real inode numbers yes no
+32-bit uids/gids yes no
+File creation time yes no
+Xattr support yes no
+ACL support no no
+============================== ========= ==========
Squashfs compresses data, inodes and directories. In addition, inode and
directory data are highly compacted, and packed on byte boundaries. Each
@@ -47,7 +53,7 @@ compressed inode is on average 8 bytes in length (the exact length varies on
file type, i.e. regular file, directory, symbolic link, and block/char device
inodes have different sizes).
-2. USING SQUASHFS
+2. Using Squashfs
-----------------
As squashfs is a read-only filesystem, the mksquashfs program must be used to
@@ -58,11 +64,11 @@ obtained from this site also.
The squashfs-tools development tree is now located on kernel.org
git://git.kernel.org/pub/scm/fs/squashfs/squashfs-tools.git
-3. SQUASHFS FILESYSTEM DESIGN
+3. Squashfs Filesystem Design
-----------------------------
A squashfs filesystem consists of a maximum of nine parts, packed together on a
-byte alignment:
+byte alignment::
---------------
| superblock |
@@ -229,15 +235,15 @@ location of the xattr list inside each inode, a 32-bit xattr id
is stored. This xattr id is mapped into the location of the xattr
list using a second xattr id lookup table.
-4. TODOS AND OUTSTANDING ISSUES
+4. TODOs and Outstanding Issues
-------------------------------
-4.1 Todo list
+4.1 TODO list
-------------
Implement ACL support.
-4.2 Squashfs internal cache
+4.2 Squashfs Internal Cache
---------------------------
Blocks in Squashfs are compressed. To avoid repeatedly decompressing
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 38/44] docs: filesystems: convert sysfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (40 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Adjust document and section titles;
- use :field: markup;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{sysfs.txt => sysfs.rst} | 324 +++++++++---------
2 files changed, 168 insertions(+), 157 deletions(-)
rename Documentation/filesystems/{sysfs.txt => sysfs.rst} (56%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 97a5f65ae509..bafe92c72433 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -87,5 +87,6 @@ Documentation for filesystem implementations.
relay
romfs
squashfs
+ sysfs
virtiofs
vfat
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.rst
similarity index 56%
rename from Documentation/filesystems/sysfs.txt
rename to Documentation/filesystems/sysfs.rst
index ddf15b1b0d5a..290891c3fecb 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.rst
@@ -1,32 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0
-sysfs - _The_ filesystem for exporting kernel objects.
+=====================================================
+sysfs - _The_ filesystem for exporting kernel objects
+=====================================================
Patrick Mochel <mochel@osdl.org>
+
Mike Murphy <mamurph@cs.clemson.edu>
-Revised: 16 August 2011
-Original: 10 January 2003
+:Revised: 16 August 2011
+:Original: 10 January 2003
What it is:
~~~~~~~~~~~
sysfs is a ram-based filesystem initially based on ramfs. It provides
-a means to export kernel data structures, their attributes, and the
-linkages between them to userspace.
+a means to export kernel data structures, their attributes, and the
+linkages between them to userspace.
sysfs is tied inherently to the kobject infrastructure. Please read
Documentation/kobject.txt for more information concerning the kobject
-interface.
+interface.
Using sysfs
~~~~~~~~~~~
sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
-it by doing:
+it by doing::
- mount -t sysfs sysfs /sys
+ mount -t sysfs sysfs /sys
Directory Creation
@@ -37,7 +41,7 @@ created for it in sysfs. That directory is created as a subdirectory
of the kobject's parent, expressing internal object hierarchies to
userspace. Top-level directories in sysfs represent the common
ancestors of object hierarchies; i.e. the subsystems the objects
-belong to.
+belong to.
Sysfs internally stores a pointer to the kobject that implements a
directory in the kernfs_node object associated with the directory. In
@@ -58,63 +62,63 @@ attributes.
Attributes should be ASCII text files, preferably with only one value
per file. It is noted that it may not be efficient to contain only one
value per file, so it is socially acceptable to express an array of
-values of the same type.
+values of the same type.
Mixing types, expressing multiple lines of data, and doing fancy
formatting of data is heavily frowned upon. Doing these things may get
-you publicly humiliated and your code rewritten without notice.
+you publicly humiliated and your code rewritten without notice.
-An attribute definition is simply:
+An attribute definition is simply::
-struct attribute {
- char * name;
- struct module *owner;
- umode_t mode;
-};
+ struct attribute {
+ char * name;
+ struct module *owner;
+ umode_t mode;
+ };
-int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
+ int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+ void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
A bare attribute contains no means to read or write the value of the
attribute. Subsystems are encouraged to define their own attribute
structure and wrapper functions for adding and removing attributes for
-a specific object type.
+a specific object type.
-For example, the driver model defines struct device_attribute like:
+For example, the driver model defines struct device_attribute like::
-struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device *dev, struct device_attribute *attr,
- char *buf);
- ssize_t (*store)(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
-};
+ struct device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+ };
-int device_create_file(struct device *, const struct device_attribute *);
-void device_remove_file(struct device *, const struct device_attribute *);
+ int device_create_file(struct device *, const struct device_attribute *);
+ void device_remove_file(struct device *, const struct device_attribute *);
-It also defines this helper for defining device attributes:
+It also defines this helper for defining device attributes::
-#define DEVICE_ATTR(_name, _mode, _show, _store) \
-struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
+ #define DEVICE_ATTR(_name, _mode, _show, _store) \
+ struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
-For example, declaring
+For example, declaring::
-static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo);
+ static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo);
-is equivalent to doing:
+is equivalent to doing::
-static struct device_attribute dev_attr_foo = {
- .attr = {
- .name = "foo",
- .mode = S_IWUSR | S_IRUGO,
- },
- .show = show_foo,
- .store = store_foo,
-};
+ static struct device_attribute dev_attr_foo = {
+ .attr = {
+ .name = "foo",
+ .mode = S_IWUSR | S_IRUGO,
+ },
+ .show = show_foo,
+ .store = store_foo,
+ };
Note as stated in include/linux/kernel.h "OTHER_WRITABLE? Generally
considered a bad idea." so trying to set a sysfs file writable for
@@ -127,15 +131,21 @@ readable. The above case could be shortened to:
static struct device_attribute dev_attr_foo = __ATTR_RW(foo);
the list of helpers available to define your wrapper function is:
-__ATTR_RO(name): assumes default name_show and mode 0444
-__ATTR_WO(name): assumes a name_store only and is restricted to mode
+
+__ATTR_RO(name):
+ assumes default name_show and mode 0444
+__ATTR_WO(name):
+ assumes a name_store only and is restricted to mode
0200 that is root write access only.
-__ATTR_RO_MODE(name, mode): fore more restrictive RO access currently
+__ATTR_RO_MODE(name, mode):
+ fore more restrictive RO access currently
only use case is the EFI System Resource Table
(see drivers/firmware/efi/esrt.c)
-__ATTR_RW(name): assumes default name_show, name_store and setting
+__ATTR_RW(name):
+ assumes default name_show, name_store and setting
mode to 0644.
-__ATTR_NULL: which sets the name to NULL and is used as end of list
+__ATTR_NULL:
+ which sets the name to NULL and is used as end of list
indicator (see: kernel/workqueue.c)
Subsystem-Specific Callbacks
@@ -143,12 +153,12 @@ Subsystem-Specific Callbacks
When a subsystem defines a new attribute type, it must implement a
set of sysfs operations for forwarding read and write calls to the
-show and store methods of the attribute owners.
+show and store methods of the attribute owners::
-struct sysfs_ops {
- ssize_t (*show)(struct kobject *, struct attribute *, char *);
- ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
-};
+ struct sysfs_ops {
+ ssize_t (*show)(struct kobject *, struct attribute *, char *);
+ ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
+ };
[ Subsystems should have already defined a struct kobj_type as a
descriptor for this type, which is where the sysfs_ops pointer is
@@ -157,29 +167,29 @@ stored. See the kobject documentation for more information. ]
When a file is read or written, sysfs calls the appropriate method
for the type. The method then translates the generic struct kobject
and struct attribute pointers to the appropriate pointer types, and
-calls the associated methods.
+calls the associated methods.
-To illustrate:
+To illustrate::
-#define to_dev(obj) container_of(obj, struct device, kobj)
-#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
+ #define to_dev(obj) container_of(obj, struct device, kobj)
+ #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
-static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct device_attribute *dev_attr = to_dev_attr(attr);
- struct device *dev = to_dev(kobj);
- ssize_t ret = -EIO;
+ static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+ {
+ struct device_attribute *dev_attr = to_dev_attr(attr);
+ struct device *dev = to_dev(kobj);
+ ssize_t ret = -EIO;
- if (dev_attr->show)
- ret = dev_attr->show(dev, dev_attr, buf);
- if (ret >= (ssize_t)PAGE_SIZE) {
- printk("dev_attr_show: %pS returned bad count\n",
- dev_attr->show);
- }
- return ret;
-}
+ if (dev_attr->show)
+ ret = dev_attr->show(dev, dev_attr, buf);
+ if (ret >= (ssize_t)PAGE_SIZE) {
+ printk("dev_attr_show: %pS returned bad count\n",
+ dev_attr->show);
+ }
+ return ret;
+ }
@@ -188,11 +198,11 @@ Reading/Writing Attribute Data
To read or write attributes, show() or store() methods must be
specified when declaring the attribute. The method types should be as
-simple as those defined for device attributes:
+simple as those defined for device attributes::
-ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
-ssize_t (*store)(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
IOW, they should take only an object, an attribute, and a buffer as parameters.
@@ -200,11 +210,11 @@ IOW, they should take only an object, an attribute, and a buffer as parameters.
sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
method. Sysfs will call the method exactly once for each read or
write. This forces the following behavior on the method
-implementations:
+implementations:
-- On read(2), the show() method should fill the entire buffer.
+- On read(2), the show() method should fill the entire buffer.
Recall that an attribute should only be exporting one value, or an
- array of similar values, so this shouldn't be that expensive.
+ array of similar values, so this shouldn't be that expensive.
This allows userspace to do partial reads and forward seeks
arbitrarily over the entire file at will. If userspace seeks back to
@@ -218,10 +228,10 @@ implementations:
When writing sysfs files, userspace processes should first read the
entire file, modify the values it wishes to change, then write the
- entire buffer back.
+ entire buffer back.
Attribute method implementations should operate on an identical
- buffer when reading and writing values.
+ buffer when reading and writing values.
Other notes:
@@ -229,7 +239,7 @@ Other notes:
file position.
- The buffer will always be PAGE_SIZE bytes in length. On i386, this
- is 4096.
+ is 4096.
- show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
@@ -246,31 +256,31 @@ Other notes:
through, be sure to return an error.
- The object passed to the methods will be pinned in memory via sysfs
- referencing counting its embedded object. However, the physical
- entity (e.g. device) the object represents may not be present. Be
- sure to have a way to check this, if necessary.
+ referencing counting its embedded object. However, the physical
+ entity (e.g. device) the object represents may not be present. Be
+ sure to have a way to check this, if necessary.
-A very simple (and naive) implementation of a device attribute is:
+A very simple (and naive) implementation of a device attribute is::
-static ssize_t show_name(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name);
-}
+ static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+ {
+ return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name);
+ }
-static ssize_t store_name(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- snprintf(dev->name, sizeof(dev->name), "%.*s",
- (int)min(count, sizeof(dev->name) - 1), buf);
- return count;
-}
+ static ssize_t store_name(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+ {
+ snprintf(dev->name, sizeof(dev->name), "%.*s",
+ (int)min(count, sizeof(dev->name) - 1), buf);
+ return count;
+ }
-static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
+ static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
-(Note that the real implementation doesn't allow userspace to set the
+(Note that the real implementation doesn't allow userspace to set the
name for a device.)
@@ -278,25 +288,25 @@ Top Level Directory Layout
~~~~~~~~~~~~~~~~~~~~~~~~~~
The sysfs directory arrangement exposes the relationship of kernel
-data structures.
+data structures.
-The top level sysfs directory looks like:
+The top level sysfs directory looks like::
-block/
-bus/
-class/
-dev/
-devices/
-firmware/
-net/
-fs/
+ block/
+ bus/
+ class/
+ dev/
+ devices/
+ firmware/
+ net/
+ fs/
devices/ contains a filesystem representation of the device tree. It maps
directly to the internal kernel device tree, which is a hierarchy of
-struct device.
+struct device.
bus/ contains flat directory layout of the various bus types in the
-kernel. Each bus's directory contains two subdirectories:
+kernel. Each bus's directory contains two subdirectories::
devices/
drivers/
@@ -331,71 +341,71 @@ Current Interfaces
The following interface layers currently exist in sysfs:
-- devices (include/linux/device.h)
-----------------------------------
-Structure:
+devices (include/linux/device.h)
+--------------------------------
+Structure::
-struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device *dev, struct device_attribute *attr,
- char *buf);
- ssize_t (*store)(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
-};
+ struct device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+ };
-Declaring:
+Declaring::
-DEVICE_ATTR(_name, _mode, _show, _store);
+ DEVICE_ATTR(_name, _mode, _show, _store);
-Creation/Removal:
+Creation/Removal::
-int device_create_file(struct device *dev, const struct device_attribute * attr);
-void device_remove_file(struct device *dev, const struct device_attribute * attr);
+ int device_create_file(struct device *dev, const struct device_attribute * attr);
+ void device_remove_file(struct device *dev, const struct device_attribute * attr);
-- bus drivers (include/linux/device.h)
---------------------------------------
-Structure:
+bus drivers (include/linux/device.h)
+------------------------------------
+Structure::
-struct bus_attribute {
- struct attribute attr;
- ssize_t (*show)(struct bus_type *, char * buf);
- ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
-};
+ struct bus_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct bus_type *, char * buf);
+ ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
+ };
-Declaring:
+Declaring::
-static BUS_ATTR_RW(name);
-static BUS_ATTR_RO(name);
-static BUS_ATTR_WO(name);
+ static BUS_ATTR_RW(name);
+ static BUS_ATTR_RO(name);
+ static BUS_ATTR_WO(name);
-Creation/Removal:
+Creation/Removal::
-int bus_create_file(struct bus_type *, struct bus_attribute *);
-void bus_remove_file(struct bus_type *, struct bus_attribute *);
+ int bus_create_file(struct bus_type *, struct bus_attribute *);
+ void bus_remove_file(struct bus_type *, struct bus_attribute *);
-- device drivers (include/linux/device.h)
------------------------------------------
+device drivers (include/linux/device.h)
+---------------------------------------
-Structure:
+Structure::
-struct driver_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device_driver *, char * buf);
- ssize_t (*store)(struct device_driver *, const char * buf,
- size_t count);
-};
+ struct driver_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device_driver *, char * buf);
+ ssize_t (*store)(struct device_driver *, const char * buf,
+ size_t count);
+ };
-Declaring:
+Declaring::
-DRIVER_ATTR_RO(_name)
-DRIVER_ATTR_RW(_name)
+ DRIVER_ATTR_RO(_name)
+ DRIVER_ATTR_RW(_name)
-Creation/Removal:
+Creation/Removal::
-int driver_create_file(struct device_driver *, const struct driver_attribute *);
-void driver_remove_file(struct device_driver *, const struct driver_attribute *);
+ int driver_create_file(struct device_driver *, const struct driver_attribute *);
+ void driver_remove_file(struct device_driver *, const struct driver_attribute *);
Documentation
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 39/44] docs: filesystems: convert sysv-fs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (41 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Christoph Hellwig
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{sysv-fs.txt => sysv-fs.rst} | 155 +++++++++++++-----
2 files changed, 112 insertions(+), 44 deletions(-)
rename Documentation/filesystems/{sysv-fs.txt => sysv-fs.rst} (73%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index bafe92c72433..d583b8b35196 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -88,5 +88,6 @@ Documentation for filesystem implementations.
romfs
squashfs
sysfs
+ sysv-fs
virtiofs
vfat
diff --git a/Documentation/filesystems/sysv-fs.txt b/Documentation/filesystems/sysv-fs.rst
similarity index 73%
rename from Documentation/filesystems/sysv-fs.txt
rename to Documentation/filesystems/sysv-fs.rst
index 253b50d1328e..89e40911ad7c 100644
--- a/Documentation/filesystems/sysv-fs.txt
+++ b/Documentation/filesystems/sysv-fs.rst
@@ -1,25 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+SystemV Filesystem
+==================
+
It implements all of
- Xenix FS,
- SystemV/386 FS,
- Coherent FS.
To install:
+
* Answer the 'System V and Coherent filesystem support' question with 'y'
when configuring the kernel.
-* To mount a disk or a partition, use
+* To mount a disk or a partition, use::
+
mount [-r] -t sysv device mountpoint
- The file system type names
+
+ The file system type names::
+
-t sysv
-t xenix
-t coherent
+
may be used interchangeably, but the last two will eventually disappear.
Bugs in the present implementation:
+
- Coherent FS:
+
- The "free list interleave" n:m is currently ignored.
- Only file systems with no filesystem name and no pack name are recognized.
- (See Coherent "man mkfs" for a description of these features.)
+ (See Coherent "man mkfs" for a description of these features.)
+
- SystemV Release 2 FS:
+
The superblock is only searched in the blocks 9, 15, 18, which
corresponds to the beginning of track 1 on floppy disks. No support
for this FS on hard disk yet.
@@ -28,12 +43,14 @@ Bugs in the present implementation:
These filesystems are rather similar. Here is a comparison with Minix FS:
* Linux fdisk reports on partitions
+
- Minix FS 0x81 Linux/Minix
- Xenix FS ??
- SystemV FS ??
- Coherent FS 0x08 AIX bootable
* Size of a block or zone (data allocation unit on disk)
+
- Minix FS 1024
- Xenix FS 1024 (also 512 ??)
- SystemV FS 1024 (also 512 and 2048)
@@ -45,37 +62,51 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
all the block numbers (including the super block) are offset by one track.
* Byte ordering of "short" (16 bit entities) on disk:
+
- Minix FS little endian 0 1
- Xenix FS little endian 0 1
- SystemV FS little endian 0 1
- Coherent FS little endian 0 1
+
Of course, this affects only the file system, not the data of files on it!
* Byte ordering of "long" (32 bit entities) on disk:
+
- Minix FS little endian 0 1 2 3
- Xenix FS little endian 0 1 2 3
- SystemV FS little endian 0 1 2 3
- Coherent FS PDP-11 2 3 0 1
+
Of course, this affects only the file system, not the data of files on it!
* Inode on disk: "short", 0 means non-existent, the root dir ino is:
- - Minix FS 1
- - Xenix FS, SystemV FS, Coherent FS 2
+
+ ================================= ==
+ Minix FS 1
+ Xenix FS, SystemV FS, Coherent FS 2
+ ================================= ==
* Maximum number of hard links to a file:
- - Minix FS 250
- - Xenix FS ??
- - SystemV FS ??
- - Coherent FS >=10000
+
+ =========== =========
+ Minix FS 250
+ Xenix FS ??
+ SystemV FS ??
+ Coherent FS >=10000
+ =========== =========
* Free inode management:
- - Minix FS a bitmap
+
+ - Minix FS
+ a bitmap
- Xenix FS, SystemV FS, Coherent FS
There is a cache of a certain number of free inodes in the super-block.
When it is exhausted, new free inodes are found using a linear search.
* Free block management:
- - Minix FS a bitmap
+
+ - Minix FS
+ a bitmap
- Xenix FS, SystemV FS, Coherent FS
Free blocks are organized in a "free list". Maybe a misleading term,
since it is not true that every free block contains a pointer to
@@ -86,13 +117,18 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
0 on Xenix FS and SystemV FS, with a block zeroed out on Coherent FS.
* Super-block location:
- - Minix FS block 1 = bytes 1024..2047
- - Xenix FS block 1 = bytes 1024..2047
- - SystemV FS bytes 512..1023
- - Coherent FS block 1 = bytes 512..1023
+
+ =========== ==========================
+ Minix FS block 1 = bytes 1024..2047
+ Xenix FS block 1 = bytes 1024..2047
+ SystemV FS bytes 512..1023
+ Coherent FS block 1 = bytes 512..1023
+ =========== ==========================
* Super-block layout:
- - Minix FS
+
+ - Minix FS::
+
unsigned short s_ninodes;
unsigned short s_nzones;
unsigned short s_imap_blocks;
@@ -101,7 +137,9 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
unsigned short s_log_zone_size;
unsigned long s_max_size;
unsigned short s_magic;
- - Xenix FS, SystemV FS, Coherent FS
+
+ - Xenix FS, SystemV FS, Coherent FS::
+
unsigned short s_firstdatazone;
unsigned long s_nzones;
unsigned short s_fzone_count;
@@ -120,23 +158,33 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
unsigned short s_interleave_m,s_interleave_n; -- Coherent FS only
char s_fname[6];
char s_fpack[6];
+
then they differ considerably:
- Xenix FS
+
+ Xenix FS::
+
char s_clean;
char s_fill[371];
long s_magic;
long s_type;
- SystemV FS
+
+ SystemV FS::
+
long s_fill[12 or 14];
long s_state;
long s_magic;
long s_type;
- Coherent FS
+
+ Coherent FS::
+
unsigned long s_unique;
+
Note that Coherent FS has no magic.
* Inode layout:
- - Minix FS
+
+ - Minix FS::
+
unsigned short i_mode;
unsigned short i_uid;
unsigned long i_size;
@@ -144,7 +192,9 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
unsigned char i_gid;
unsigned char i_nlinks;
unsigned short i_zone[7+1+1];
- - Xenix FS, SystemV FS, Coherent FS
+
+ - Xenix FS, SystemV FS, Coherent FS::
+
unsigned short i_mode;
unsigned short i_nlink;
unsigned short i_uid;
@@ -155,38 +205,55 @@ These filesystems are rather similar. Here is a comparison with Minix FS:
unsigned long i_mtime;
unsigned long i_ctime;
+
* Regular file data blocks are organized as
- - Minix FS
- 7 direct blocks
- 1 indirect block (pointers to blocks)
- 1 double-indirect block (pointer to pointers to blocks)
- - Xenix FS, SystemV FS, Coherent FS
- 10 direct blocks
- 1 indirect block (pointers to blocks)
- 1 double-indirect block (pointer to pointers to blocks)
- 1 triple-indirect block (pointer to pointers to pointers to blocks)
-
-* Inode size, inodes per block
- - Minix FS 32 32
- - Xenix FS 64 16
- - SystemV FS 64 16
- - Coherent FS 64 8
+
+ - Minix FS:
+
+ - 7 direct blocks
+ - 1 indirect block (pointers to blocks)
+ - 1 double-indirect block (pointer to pointers to blocks)
+
+ - Xenix FS, SystemV FS, Coherent FS:
+
+ - 10 direct blocks
+ - 1 indirect block (pointers to blocks)
+ - 1 double-indirect block (pointer to pointers to blocks)
+ - 1 triple-indirect block (pointer to pointers to pointers to blocks)
+
+
+ =========== ========== ================
+ Inode size inodes per block
+ =========== ========== ================
+ Minix FS 32 32
+ Xenix FS 64 16
+ SystemV FS 64 16
+ Coherent FS 64 8
+ =========== ========== ================
* Directory entry on disk
- - Minix FS
+
+ - Minix FS::
+
unsigned short inode;
char name[14/30];
- - Xenix FS, SystemV FS, Coherent FS
+
+ - Xenix FS, SystemV FS, Coherent FS::
+
unsigned short inode;
char name[14];
-* Dir entry size, dir entries per block
- - Minix FS 16/32 64/32
- - Xenix FS 16 64
- - SystemV FS 16 64
- - Coherent FS 16 32
+ =========== ============== =====================
+ Dir entry size dir entries per block
+ =========== ============== =====================
+ Minix FS 16/32 64/32
+ Xenix FS 16 64
+ SystemV FS 16 64
+ Coherent FS 16 32
+ =========== ============== =====================
* How to implement symbolic links such that the host fsck doesn't scream:
+
- Minix FS normal
- Xenix FS kludge: as regular files with chmod 1000
- SystemV FS ??
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 40/44] docs: filesystems: convert tmpfs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (42 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Use :field: markup;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{tmpfs.txt => tmpfs.rst} | 44 ++++++++++++-------
2 files changed, 30 insertions(+), 15 deletions(-)
rename Documentation/filesystems/{tmpfs.txt => tmpfs.rst} (86%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index d583b8b35196..27d37e7712da 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -89,5 +89,6 @@ Documentation for filesystem implementations.
squashfs
sysfs
sysv-fs
+ tmpfs
virtiofs
vfat
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.rst
similarity index 86%
rename from Documentation/filesystems/tmpfs.txt
rename to Documentation/filesystems/tmpfs.rst
index 5ecbc03e6b2f..4e95929301a5 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
+Tmpfs
+=====
+
Tmpfs is a file system which keeps all files in virtual memory.
@@ -14,7 +20,7 @@ If you compare it to ramfs (which was the template to create tmpfs)
you gain swapping and limit checking. Another similar thing is the RAM
disk (/dev/ram*), which simulates a fixed size hard disk in physical
RAM, where you have to create an ordinary filesystem on top. Ramdisks
-cannot swap and you do not have the possibility to resize them.
+cannot swap and you do not have the possibility to resize them.
Since tmpfs lives completely in the page cache and on swap, all tmpfs
pages will be shown as "Shmem" in /proc/meminfo and "Shared" in
@@ -26,7 +32,7 @@ tmpfs has the following uses:
1) There is always a kernel internal mount which you will not see at
all. This is used for shared anonymous mappings and SYSV shared
- memory.
+ memory.
This mount does not depend on CONFIG_TMPFS. If CONFIG_TMPFS is not
set, the user visible part of tmpfs is not build. But the internal
@@ -34,7 +40,7 @@ tmpfs has the following uses:
2) glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
POSIX shared memory (shm_open, shm_unlink). Adding the following
- line to /etc/fstab should take care of this:
+ line to /etc/fstab should take care of this::
tmpfs /dev/shm tmpfs defaults 0 0
@@ -56,15 +62,17 @@ tmpfs has the following uses:
tmpfs has three mount options for sizing:
-size: The limit of allocated bytes for this tmpfs instance. The
+========= ============================================================
+size The limit of allocated bytes for this tmpfs instance. The
default is half of your physical RAM without swap. If you
oversize your tmpfs instances the machine will deadlock
since the OOM handler will not be able to free that memory.
-nr_blocks: The same as size, but in blocks of PAGE_SIZE.
-nr_inodes: The maximum number of inodes for this instance. The default
+nr_blocks The same as size, but in blocks of PAGE_SIZE.
+nr_inodes The maximum number of inodes for this instance. The default
is half of the number of your physical RAM pages, or (on a
machine with highmem) the number of lowmem RAM pages,
whichever is the lower.
+========= ============================================================
These parameters accept a suffix k, m or g for kilo, mega and giga and
can be changed on remount. The size parameter also accepts a suffix %
@@ -82,6 +90,7 @@ tmpfs has a mount option to set the NUMA memory allocation policy for
all files in that instance (if CONFIG_NUMA is enabled) - which can be
adjusted on the fly via 'mount -o remount ...'
+======================== ==============================================
mpol=default use the process allocation policy
(see set_mempolicy(2))
mpol=prefer:Node prefers to allocate memory from the given Node
@@ -89,6 +98,7 @@ mpol=bind:NodeList allocates memory only from nodes in NodeList
mpol=interleave prefers to allocate from each node in turn
mpol=interleave:NodeList allocates from each node of NodeList in turn
mpol=local prefers to allocate memory from the local node
+======================== ==============================================
NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
@@ -98,9 +108,9 @@ A memory policy with a valid NodeList will be saved, as specified, for
use at file creation time. When a task allocates a file in the file
system, the mount option memory policy will be applied with a NodeList,
if any, modified by the calling task's cpuset constraints
-[See Documentation/admin-guide/cgroup-v1/cpusets.rst] and any optional flags, listed
-below. If the resulting NodeLists is the empty set, the effective memory
-policy for the file will revert to "default" policy.
+[See Documentation/admin-guide/cgroup-v1/cpusets.rst] and any optional flags,
+listed below. If the resulting NodeLists is the empty set, the effective
+memory policy for the file will revert to "default" policy.
NUMA memory allocation policies have optional flags that can be used in
conjunction with their modes. These optional flags can be specified
@@ -109,6 +119,8 @@ See Documentation/admin-guide/mm/numa_memory_policy.rst for a list of
all available memory allocation policy mode flags and their effect on
memory policy.
+::
+
=static is equivalent to MPOL_F_STATIC_NODES
=relative is equivalent to MPOL_F_RELATIVE_NODES
@@ -128,9 +140,11 @@ on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
To specify the initial root directory you can use the following mount
options:
-mode: The permissions as an octal number
-uid: The user id
-gid: The group id
+==== ==================================
+mode The permissions as an octal number
+uid The user id
+gid The group id
+==== ==================================
These options do not have any effect on remount. You can change these
parameters with chmod(1), chown(1) and chgrp(1) on a mounted filesystem.
@@ -141,9 +155,9 @@ will give you tmpfs instance on /mytmpfs which can allocate 10GB
RAM/SWAP in 10240 inodes and it is only accessible by root.
-Author:
+:Author:
Christoph Rohland <cr@sap.com>, 1.12.01
-Updated:
+:Updated:
Hugh Dickins, 4 June 2007
-Updated:
+:Updated:
KOSAKI Motohiro, 16 Mar 2010
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 41/44] docs: filesystems: convert ubifs-authentication.rst.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (43 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel
- Add a SPDX header;
- Mark some literals as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
Documentation/filesystems/ubifs-authentication.rst | 10 ++++++----
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 27d37e7712da..bb14738df358 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -90,5 +90,6 @@ Documentation for filesystem implementations.
sysfs
sysv-fs
tmpfs
+ ubifs-authentication.rst
virtiofs
vfat
diff --git a/Documentation/filesystems/ubifs-authentication.rst b/Documentation/filesystems/ubifs-authentication.rst
index 6a9584f6ff46..16efd729bf7c 100644
--- a/Documentation/filesystems/ubifs-authentication.rst
+++ b/Documentation/filesystems/ubifs-authentication.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
:orphan:
.. UBIFS Authentication
@@ -92,11 +94,11 @@ UBIFS Index & Tree Node Cache
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Basic on-flash UBIFS entities are called *nodes*. UBIFS knows different types
-of nodes. Eg. data nodes (`struct ubifs_data_node`) which store chunks of file
-contents or inode nodes (`struct ubifs_ino_node`) which represent VFS inodes.
-Almost all types of nodes share a common header (`ubifs_ch`) containing basic
+of nodes. Eg. data nodes (``struct ubifs_data_node``) which store chunks of file
+contents or inode nodes (``struct ubifs_ino_node``) which represent VFS inodes.
+Almost all types of nodes share a common header (``ubifs_ch``) containing basic
information like node type, node length, a sequence number, etc. (see
-`fs/ubifs/ubifs-media.h`in kernel source). Exceptions are entries of the LPT
+``fs/ubifs/ubifs-media.h`` in kernel source). Exceptions are entries of the LPT
and some less important node types like padding nodes which are used to pad
unusable content at the end of LEBs.
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 42/44] docs: filesystems: convert ubifs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Richard Weinberger, linux-mtd
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +++++++++++++------
2 files changed, 19 insertions(+), 7 deletions(-)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index bb14738df358..58d57c9bf922 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -90,6 +90,7 @@ Documentation for filesystem implementations.
sysfs
sysv-fs
tmpfs
+ ubifs
ubifs-authentication.rst
virtiofs
vfat
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.rst
similarity index 91%
rename from Documentation/filesystems/ubifs.txt
rename to Documentation/filesystems/ubifs.rst
index acc80442a3bb..e6ee99762534 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.rst
@@ -1,5 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+UBI File System
+===============
+
Introduction
-=============
+============
UBIFS file-system stands for UBI File System. UBI stands for "Unsorted
Block Images". UBIFS is a flash file system, which means it is designed
@@ -79,6 +85,7 @@ Mount options
(*) == default.
+==================== =======================================================
bulk_read read more in one go to take advantage of flash
media that read faster sequentially
no_bulk_read (*) do not bulk-read
@@ -98,6 +105,7 @@ auth_key= specify the key used for authenticating the filesystem.
auth_hash_name= The hash algorithm used for authentication. Used for
both hashing and for creating HMACs. Typical values
include "sha256" or "sha512"
+==================== =======================================================
Quick usage instructions
@@ -107,12 +115,14 @@ The UBI volume to mount is specified using "ubiX_Y" or "ubiX:NAME" syntax,
where "X" is UBI device number, "Y" is UBI volume number, and "NAME" is
UBI volume name.
-Mount volume 0 on UBI device 0 to /mnt/ubifs:
-$ mount -t ubifs ubi0_0 /mnt/ubifs
+Mount volume 0 on UBI device 0 to /mnt/ubifs::
+
+ $ mount -t ubifs ubi0_0 /mnt/ubifs
Mount "rootfs" volume of UBI device 0 to /mnt/ubifs ("rootfs" is volume
-name):
-$ mount -t ubifs ubi0:rootfs /mnt/ubifs
+name)::
+
+ $ mount -t ubifs ubi0:rootfs /mnt/ubifs
The following is an example of the kernel boot arguments to attach mtd0
to UBI and mount volume "rootfs":
@@ -122,5 +132,6 @@ References
==========
UBIFS documentation and FAQ/HOWTO at the MTD web site:
-http://www.linux-mtd.infradead.org/doc/ubifs.html
-http://www.linux-mtd.infradead.org/faq/ubifs.html
+
+- http://www.linux-mtd.infradead.org/doc/ubifs.html
+- http://www.linux-mtd.infradead.org/faq/ubifs.html
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* [PATCH 42/44] docs: filesystems: convert ubifs.txt to ReST
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, linux-fsdevel, linux-mtd,
Richard Weinberger, Jonathan Corbet
- Add a SPDX header;
- Add a document title;
- Adjust section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{ubifs.txt => ubifs.rst} | 25 +++++++++++++------
2 files changed, 19 insertions(+), 7 deletions(-)
rename Documentation/filesystems/{ubifs.txt => ubifs.rst} (91%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index bb14738df358..58d57c9bf922 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -90,6 +90,7 @@ Documentation for filesystem implementations.
sysfs
sysv-fs
tmpfs
+ ubifs
ubifs-authentication.rst
virtiofs
vfat
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.rst
similarity index 91%
rename from Documentation/filesystems/ubifs.txt
rename to Documentation/filesystems/ubifs.rst
index acc80442a3bb..e6ee99762534 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.rst
@@ -1,5 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+UBI File System
+===============
+
Introduction
-=============
+============
UBIFS file-system stands for UBI File System. UBI stands for "Unsorted
Block Images". UBIFS is a flash file system, which means it is designed
@@ -79,6 +85,7 @@ Mount options
(*) == default.
+==================== =======================================================
bulk_read read more in one go to take advantage of flash
media that read faster sequentially
no_bulk_read (*) do not bulk-read
@@ -98,6 +105,7 @@ auth_key= specify the key used for authenticating the filesystem.
auth_hash_name= The hash algorithm used for authentication. Used for
both hashing and for creating HMACs. Typical values
include "sha256" or "sha512"
+==================== =======================================================
Quick usage instructions
@@ -107,12 +115,14 @@ The UBI volume to mount is specified using "ubiX_Y" or "ubiX:NAME" syntax,
where "X" is UBI device number, "Y" is UBI volume number, and "NAME" is
UBI volume name.
-Mount volume 0 on UBI device 0 to /mnt/ubifs:
-$ mount -t ubifs ubi0_0 /mnt/ubifs
+Mount volume 0 on UBI device 0 to /mnt/ubifs::
+
+ $ mount -t ubifs ubi0_0 /mnt/ubifs
Mount "rootfs" volume of UBI device 0 to /mnt/ubifs ("rootfs" is volume
-name):
-$ mount -t ubifs ubi0:rootfs /mnt/ubifs
+name)::
+
+ $ mount -t ubifs ubi0:rootfs /mnt/ubifs
The following is an example of the kernel boot arguments to attach mtd0
to UBI and mount volume "rootfs":
@@ -122,5 +132,6 @@ References
==========
UBIFS documentation and FAQ/HOWTO at the MTD web site:
-http://www.linux-mtd.infradead.org/doc/ubifs.html
-http://www.linux-mtd.infradead.org/faq/ubifs.html
+
+- http://www.linux-mtd.infradead.org/doc/ubifs.html
+- http://www.linux-mtd.infradead.org/faq/ubifs.html
--
2.24.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 112+ messages in thread
* [PATCH 43/44] docs: filesystems: convert udf.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (45 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
2020-02-18 7:12 ` Jan Kara
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel, Jan Kara
- Add a SPDX header;
- Add a document title;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{udf.txt => udf.rst} | 21 +++++++++++++------
2 files changed, 16 insertions(+), 6 deletions(-)
rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 58d57c9bf922..ec03cb4d7353 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -92,5 +92,6 @@ Documentation for filesystem implementations.
tmpfs
ubifs
ubifs-authentication.rst
+ udf
virtiofs
vfat
diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.rst
similarity index 83%
rename from Documentation/filesystems/udf.txt
rename to Documentation/filesystems/udf.rst
index e2f2faf32f18..d9badbf285b2 100644
--- a/Documentation/filesystems/udf.txt
+++ b/Documentation/filesystems/udf.rst
@@ -1,6 +1,8 @@
-*
-* Documentation/filesystems/udf.txt
-*
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+UDF file system
+===============
If you encounter problems with reading UDF discs using this driver,
please report them according to MAINTAINERS file.
@@ -18,8 +20,10 @@ performance due to very poor read-modify-write support supplied internally
by drive firmware.
-------------------------------------------------------------------------------
+
The following mount options are supported:
+ =========== ======================================
gid= Set the default group.
umask= Set the default umask.
mode= Set the default file permissions.
@@ -34,6 +38,7 @@ The following mount options are supported:
longad Use long ad's (default)
nostrict Unset strict conformance
iocharset= Set the NLS character set
+ =========== ======================================
The uid= and gid= options need a bit more explaining. They will accept a
decimal numeric value and all inodes on that mount will then appear as
@@ -47,13 +52,17 @@ the interactive user will always see the files on the disk as belonging to him.
The remaining are for debugging and disaster recovery:
- novrs Skip volume sequence recognition
+ ===== ================================
+ novrs Skip volume sequence recognition
+ ===== ================================
The following expect a offset from 0.
+ ========== =================================================
session= Set the CDROM session (default= last session)
anchor= Override standard anchor location. (default= 256)
lastblock= Set the last block of the filesystem/
+ ========== =================================================
-------------------------------------------------------------------------------
@@ -62,5 +71,5 @@ For the latest version and toolset see:
https://github.com/pali/udftools
Documentation on UDF and ECMA 167 is available FREE from:
- http://www.osta.org/
- http://www.ecma-international.org/
+ - http://www.osta.org/
+ - http://www.ecma-international.org/
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 43/44] docs: filesystems: convert udf.txt to ReST
2020-02-17 16:12 ` [PATCH 43/44] docs: filesystems: convert udf.txt " Mauro Carvalho Chehab
@ 2020-02-18 7:12 ` Jan Kara
2020-02-18 10:13 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 112+ messages in thread
From: Jan Kara @ 2020-02-18 7:12 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, Jan Kara
On Mon 17-02-20 17:12:29, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Add a document title;
> - Add table markups;
> - Add lists markups;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Thanks! You can add:
Acked-by: Jan Kara <jack@suse.cz>
and I can pickup the patch if you want.
Honza
> ---
> Documentation/filesystems/index.rst | 1 +
> .../filesystems/{udf.txt => udf.rst} | 21 +++++++++++++------
> 2 files changed, 16 insertions(+), 6 deletions(-)
> rename Documentation/filesystems/{udf.txt => udf.rst} (83%)
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index 58d57c9bf922..ec03cb4d7353 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -92,5 +92,6 @@ Documentation for filesystem implementations.
> tmpfs
> ubifs
> ubifs-authentication.rst
> + udf
> virtiofs
> vfat
> diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.rst
> similarity index 83%
> rename from Documentation/filesystems/udf.txt
> rename to Documentation/filesystems/udf.rst
> index e2f2faf32f18..d9badbf285b2 100644
> --- a/Documentation/filesystems/udf.txt
> +++ b/Documentation/filesystems/udf.rst
> @@ -1,6 +1,8 @@
> -*
> -* Documentation/filesystems/udf.txt
> -*
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===============
> +UDF file system
> +===============
>
> If you encounter problems with reading UDF discs using this driver,
> please report them according to MAINTAINERS file.
> @@ -18,8 +20,10 @@ performance due to very poor read-modify-write support supplied internally
> by drive firmware.
>
> -------------------------------------------------------------------------------
> +
> The following mount options are supported:
>
> + =========== ======================================
> gid= Set the default group.
> umask= Set the default umask.
> mode= Set the default file permissions.
> @@ -34,6 +38,7 @@ The following mount options are supported:
> longad Use long ad's (default)
> nostrict Unset strict conformance
> iocharset= Set the NLS character set
> + =========== ======================================
>
> The uid= and gid= options need a bit more explaining. They will accept a
> decimal numeric value and all inodes on that mount will then appear as
> @@ -47,13 +52,17 @@ the interactive user will always see the files on the disk as belonging to him.
>
> The remaining are for debugging and disaster recovery:
>
> - novrs Skip volume sequence recognition
> + ===== ================================
> + novrs Skip volume sequence recognition
> + ===== ================================
>
> The following expect a offset from 0.
>
> + ========== =================================================
> session= Set the CDROM session (default= last session)
> anchor= Override standard anchor location. (default= 256)
> lastblock= Set the last block of the filesystem/
> + ========== =================================================
>
> -------------------------------------------------------------------------------
>
> @@ -62,5 +71,5 @@ For the latest version and toolset see:
> https://github.com/pali/udftools
>
> Documentation on UDF and ECMA 167 is available FREE from:
> - http://www.osta.org/
> - http://www.ecma-international.org/
> + - http://www.osta.org/
> + - http://www.ecma-international.org/
> --
> 2.24.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [PATCH 43/44] docs: filesystems: convert udf.txt to ReST
2020-02-18 7:12 ` Jan Kara
@ 2020-02-18 10:13 ` Mauro Carvalho Chehab
2020-02-18 10:57 ` Jan Kara
0 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:13 UTC (permalink / raw)
To: Jan Kara; +Cc: Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel, Jan Kara
Em Tue, 18 Feb 2020 08:12:05 +0100
Jan Kara <jack@suse.cz> escreveu:
> On Mon 17-02-20 17:12:29, Mauro Carvalho Chehab wrote:
> > - Add a SPDX header;
> > - Add a document title;
> > - Add table markups;
> > - Add lists markups;
> > - Add it to filesystems/index.rst.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>
> Thanks! You can add:
>
> Acked-by: Jan Kara <jack@suse.cz>
Thanks for reviewing it!
> and I can pickup the patch if you want.
From my side, it would be ok if you want to pick any patches from this series.
Still, as they all touch Documentation/filesystems/index.rst, in order
to avoid (trivial) conflicts, IMO the best would be to have all of them
applied at the same tree (either a FS tree or the docs tree).
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 43/44] docs: filesystems: convert udf.txt to ReST
2020-02-18 10:13 ` Mauro Carvalho Chehab
@ 2020-02-18 10:57 ` Jan Kara
0 siblings, 0 replies; 112+ messages in thread
From: Jan Kara @ 2020-02-18 10:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Jan Kara, Linux Doc Mailing List, Jonathan Corbet, linux-fsdevel,
Jan Kara
On Tue 18-02-20 11:13:23, Mauro Carvalho Chehab wrote:
> Em Tue, 18 Feb 2020 08:12:05 +0100
> Jan Kara <jack@suse.cz> escreveu:
>
> > On Mon 17-02-20 17:12:29, Mauro Carvalho Chehab wrote:
> > > - Add a SPDX header;
> > > - Add a document title;
> > > - Add table markups;
> > > - Add lists markups;
> > > - Add it to filesystems/index.rst.
> > >
> > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> >
> > Thanks! You can add:
> >
> > Acked-by: Jan Kara <jack@suse.cz>
>
> Thanks for reviewing it!
>
> > and I can pickup the patch if you want.
>
> From my side, it would be ok if you want to pick any patches from this series.
>
> Still, as they all touch Documentation/filesystems/index.rst, in order
> to avoid (trivial) conflicts, IMO the best would be to have all of them
> applied at the same tree (either a FS tree or the docs tree).
Yeah, I also think it makes more sense to just push them through a single
tree - likely docs tree...
Honza
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
^ permalink raw reply [flat|nested] 112+ messages in thread
* [PATCH 44/44] docs: filesystems: convert zonefs.txt to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (46 preceding siblings ...)
(?)
@ 2020-02-17 16:12 ` Mauro Carvalho Chehab
2020-02-18 3:46 ` Damien Le Moal
-1 siblings, 1 reply; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-17 16:12 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-fsdevel,
Damien Le Moal, Naohiro Aota, Johannes Thumshirn
- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/filesystems/index.rst | 1 +
.../filesystems/{zonefs.txt => zonefs.rst} | 106 ++++++++++--------
2 files changed, 58 insertions(+), 49 deletions(-)
rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index ec03cb4d7353..53f46a88e6ec 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -95,3 +95,4 @@ Documentation for filesystem implementations.
udf
virtiofs
vfat
+ zonefs
diff --git a/Documentation/filesystems/zonefs.txt b/Documentation/filesystems/zonefs.rst
similarity index 90%
rename from Documentation/filesystems/zonefs.txt
rename to Documentation/filesystems/zonefs.rst
index 935bf22031ca..7e733e751e98 100644
--- a/Documentation/filesystems/zonefs.txt
+++ b/Documentation/filesystems/zonefs.rst
@@ -1,4 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================================
ZoneFS - Zone filesystem for Zoned block devices
+================================================
Introduction
============
@@ -29,6 +33,7 @@ Zoned block devices
Zoned storage devices belong to a class of storage devices with an address
space that is divided into zones. A zone is a group of consecutive LBAs and all
zones are contiguous (there are no LBA gaps). Zones may have different types.
+
* Conventional zones: there are no access constraints to LBAs belonging to
conventional zones. Any read or write access can be executed, similarly to a
regular block device.
@@ -158,6 +163,7 @@ Format options
--------------
Several optional features of zonefs can be enabled at format time.
+
* Conventional zone aggregation: ranges of contiguous conventional zones can be
aggregated into a single larger file instead of the default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0 (root)
@@ -249,7 +255,7 @@ permissions.
Further action taken by zonefs I/O error recovery can be controlled by the user
with the "errors=xxx" mount option. The table below summarizes the result of
zonefs I/O error processing depending on the mount option and on the zone
-conditions.
+conditions::
+--------------+-----------+-----------------------------------------+
| | | Post error state |
@@ -275,6 +281,7 @@ conditions.
+--------------+-----------+-----------------------------------------+
Further notes:
+
* The "errors=remount-ro" mount option is the default behavior of zonefs I/O
error processing if no errors mount option is specified.
* With the "errors=remount-ro" mount option, the change of the file access
@@ -302,6 +309,7 @@ Mount options
zonefs define the "errors=<behavior>" mount option to allow the user to specify
zonefs behavior in response to I/O errors, inode size inconsistencies or zone
condition chages. The defined behaviors are as follow:
+
* remount-ro (default)
* zone-ro
* zone-offline
@@ -325,78 +333,78 @@ Examples
--------
The following formats a 15TB host-managed SMR HDD with 256 MB zones
-with the conventional zones aggregation feature enabled.
+with the conventional zones aggregation feature enabled::
-# mkzonefs -o aggr_cnv /dev/sdX
-# mount -t zonefs /dev/sdX /mnt
-# ls -l /mnt/
-total 0
-dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
-dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
+ # mkzonefs -o aggr_cnv /dev/sdX
+ # mount -t zonefs /dev/sdX /mnt
+ # ls -l /mnt/
+ total 0
+ dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
+ dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a single
-file).
+file)::
-# ls -l /mnt/cnv
-total 137101312
--rw-r----- 1 root root 140391743488 Nov 25 13:23 0
+ # ls -l /mnt/cnv
+ total 137101312
+ -rw-r----- 1 root root 140391743488 Nov 25 13:23 0
-This aggregated conventional zone file can be used as a regular file.
+This aggregated conventional zone file can be used as a regular file::
-# mkfs.ext4 /mnt/cnv/0
-# mount -o loop /mnt/cnv/0 /data
+ # mkfs.ext4 /mnt/cnv/0
+ # mount -o loop /mnt/cnv/0 /data
The "seq" sub-directory grouping files for sequential write zones has in this
-example 55356 zones.
+example 55356 zones::
-# ls -lv /mnt/seq
-total 14511243264
--rw-r----- 1 root root 0 Nov 25 13:23 0
--rw-r----- 1 root root 0 Nov 25 13:23 1
--rw-r----- 1 root root 0 Nov 25 13:23 2
-...
--rw-r----- 1 root root 0 Nov 25 13:23 55354
--rw-r----- 1 root root 0 Nov 25 13:23 55355
+ # ls -lv /mnt/seq
+ total 14511243264
+ -rw-r----- 1 root root 0 Nov 25 13:23 0
+ -rw-r----- 1 root root 0 Nov 25 13:23 1
+ -rw-r----- 1 root root 0 Nov 25 13:23 2
+ ...
+ -rw-r----- 1 root root 0 Nov 25 13:23 55354
+ -rw-r----- 1 root root 0 Nov 25 13:23 55355
For sequential write zone files, the file size changes as data is appended at
-the end of the file, similarly to any regular file system.
+the end of the file, similarly to any regular file system::
-# dd if=/dev/zero of=/mnt/seq/0 bs=4096 count=1 conv=notrunc oflag=direct
-1+0 records in
-1+0 records out
-4096 bytes (4.1 kB, 4.0 KiB) copied, 0.00044121 s, 9.3 MB/s
+ # dd if=/dev/zero of=/mnt/seq/0 bs=4096 count=1 conv=notrunc oflag=direct
+ 1+0 records in
+ 1+0 records out
+ 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.00044121 s, 9.3 MB/s
-# ls -l /mnt/seq/0
--rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
+ # ls -l /mnt/seq/0
+ -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
The written file can be truncated to the zone size, preventing any further
-write operation.
+write operation::
-# truncate -s 268435456 /mnt/seq/0
-# ls -l /mnt/seq/0
--rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
+ # truncate -s 268435456 /mnt/seq/0
+ # ls -l /mnt/seq/0
+ -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
Truncation to 0 size allows freeing the file zone storage space and restart
-append-writes to the file.
+append-writes to the file::
-# truncate -s 0 /mnt/seq/0
-# ls -l /mnt/seq/0
--rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
+ # truncate -s 0 /mnt/seq/0
+ # ls -l /mnt/seq/0
+ -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
Since files are statically mapped to zones on the disk, the number of blocks of
-a file as reported by stat() and fstat() indicates the size of the file zone.
+a file as reported by stat() and fstat() indicates the size of the file zone::
-# stat /mnt/seq/0
- File: /mnt/seq/0
- Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
-Device: 870h/2160d Inode: 50431 Links: 1
-Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
-Access: 2019-11-25 13:23:57.048971997 +0900
-Modify: 2019-11-25 13:52:25.553805765 +0900
-Change: 2019-11-25 13:52:25.553805765 +0900
- Birth: -
+ # stat /mnt/seq/0
+ File: /mnt/seq/0
+ Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
+ Device: 870h/2160d Inode: 50431 Links: 1
+ Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
+ Access: 2019-11-25 13:23:57.048971997 +0900
+ Modify: 2019-11-25 13:52:25.553805765 +0900
+ Change: 2019-11-25 13:52:25.553805765 +0900
+ Birth: -
The number of blocks of the file ("Blocks") in units of 512B blocks gives the
maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone
--
2.24.1
^ permalink raw reply related [flat|nested] 112+ messages in thread* Re: [PATCH 44/44] docs: filesystems: convert zonefs.txt to ReST
2020-02-17 16:12 ` [PATCH 44/44] docs: filesystems: convert zonefs.txt " Mauro Carvalho Chehab
@ 2020-02-18 3:46 ` Damien Le Moal
0 siblings, 0 replies; 112+ messages in thread
From: Damien Le Moal @ 2020-02-18 3:46 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Doc Mailing List
Cc: Jonathan Corbet, linux-fsdevel, Naohiro Aota, Johannes Thumshirn
On 2020/02/18 1:12, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Add a document title;
> - Some whitespace fixes and new line breaks;
> - Mark literal blocks as such;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
> Documentation/filesystems/index.rst | 1 +
> .../filesystems/{zonefs.txt => zonefs.rst} | 106 ++++++++++--------
> 2 files changed, 58 insertions(+), 49 deletions(-)
> rename Documentation/filesystems/{zonefs.txt => zonefs.rst} (90%)
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index ec03cb4d7353..53f46a88e6ec 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -95,3 +95,4 @@ Documentation for filesystem implementations.
> udf
> virtiofs
> vfat
> + zonefs
> diff --git a/Documentation/filesystems/zonefs.txt b/Documentation/filesystems/zonefs.rst
> similarity index 90%
> rename from Documentation/filesystems/zonefs.txt
> rename to Documentation/filesystems/zonefs.rst
> index 935bf22031ca..7e733e751e98 100644
> --- a/Documentation/filesystems/zonefs.txt
> +++ b/Documentation/filesystems/zonefs.rst
> @@ -1,4 +1,8 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +================================================
> ZoneFS - Zone filesystem for Zoned block devices
> +================================================
>
> Introduction
> ============
> @@ -29,6 +33,7 @@ Zoned block devices
> Zoned storage devices belong to a class of storage devices with an address
> space that is divided into zones. A zone is a group of consecutive LBAs and all
> zones are contiguous (there are no LBA gaps). Zones may have different types.
> +
> * Conventional zones: there are no access constraints to LBAs belonging to
> conventional zones. Any read or write access can be executed, similarly to a
> regular block device.
> @@ -158,6 +163,7 @@ Format options
> --------------
>
> Several optional features of zonefs can be enabled at format time.
> +
> * Conventional zone aggregation: ranges of contiguous conventional zones can be
> aggregated into a single larger file instead of the default one file per zone.
> * File ownership: The owner UID and GID of zone files is by default 0 (root)
> @@ -249,7 +255,7 @@ permissions.
> Further action taken by zonefs I/O error recovery can be controlled by the user
> with the "errors=xxx" mount option. The table below summarizes the result of
> zonefs I/O error processing depending on the mount option and on the zone
> -conditions.
> +conditions::
>
> +--------------+-----------+-----------------------------------------+
> | | | Post error state |
> @@ -275,6 +281,7 @@ conditions.
> +--------------+-----------+-----------------------------------------+
>
> Further notes:
> +
> * The "errors=remount-ro" mount option is the default behavior of zonefs I/O
> error processing if no errors mount option is specified.
> * With the "errors=remount-ro" mount option, the change of the file access
> @@ -302,6 +309,7 @@ Mount options
> zonefs define the "errors=<behavior>" mount option to allow the user to specify
> zonefs behavior in response to I/O errors, inode size inconsistencies or zone
> condition chages. The defined behaviors are as follow:
> +
> * remount-ro (default)
> * zone-ro
> * zone-offline
> @@ -325,78 +333,78 @@ Examples
> --------
>
> The following formats a 15TB host-managed SMR HDD with 256 MB zones
> -with the conventional zones aggregation feature enabled.
> +with the conventional zones aggregation feature enabled::
>
> -# mkzonefs -o aggr_cnv /dev/sdX
> -# mount -t zonefs /dev/sdX /mnt
> -# ls -l /mnt/
> -total 0
> -dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
> -dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
> + # mkzonefs -o aggr_cnv /dev/sdX
> + # mount -t zonefs /dev/sdX /mnt
> + # ls -l /mnt/
> + total 0
> + dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
> + dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
>
> The size of the zone files sub-directories indicate the number of files
> existing for each type of zones. In this example, there is only one
> conventional zone file (all conventional zones are aggregated under a single
> -file).
> +file)::
>
> -# ls -l /mnt/cnv
> -total 137101312
> --rw-r----- 1 root root 140391743488 Nov 25 13:23 0
> + # ls -l /mnt/cnv
> + total 137101312
> + -rw-r----- 1 root root 140391743488 Nov 25 13:23 0
>
> -This aggregated conventional zone file can be used as a regular file.
> +This aggregated conventional zone file can be used as a regular file::
>
> -# mkfs.ext4 /mnt/cnv/0
> -# mount -o loop /mnt/cnv/0 /data
> + # mkfs.ext4 /mnt/cnv/0
> + # mount -o loop /mnt/cnv/0 /data
>
> The "seq" sub-directory grouping files for sequential write zones has in this
> -example 55356 zones.
> +example 55356 zones::
>
> -# ls -lv /mnt/seq
> -total 14511243264
> --rw-r----- 1 root root 0 Nov 25 13:23 0
> --rw-r----- 1 root root 0 Nov 25 13:23 1
> --rw-r----- 1 root root 0 Nov 25 13:23 2
> -...
> --rw-r----- 1 root root 0 Nov 25 13:23 55354
> --rw-r----- 1 root root 0 Nov 25 13:23 55355
> + # ls -lv /mnt/seq
> + total 14511243264
> + -rw-r----- 1 root root 0 Nov 25 13:23 0
> + -rw-r----- 1 root root 0 Nov 25 13:23 1
> + -rw-r----- 1 root root 0 Nov 25 13:23 2
> + ...
> + -rw-r----- 1 root root 0 Nov 25 13:23 55354
> + -rw-r----- 1 root root 0 Nov 25 13:23 55355
>
> For sequential write zone files, the file size changes as data is appended at
> -the end of the file, similarly to any regular file system.
> +the end of the file, similarly to any regular file system::
>
> -# dd if=/dev/zero of=/mnt/seq/0 bs=4096 count=1 conv=notrunc oflag=direct
> -1+0 records in
> -1+0 records out
> -4096 bytes (4.1 kB, 4.0 KiB) copied, 0.00044121 s, 9.3 MB/s
> + # dd if=/dev/zero of=/mnt/seq/0 bs=4096 count=1 conv=notrunc oflag=direct
> + 1+0 records in
> + 1+0 records out
> + 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.00044121 s, 9.3 MB/s
>
> -# ls -l /mnt/seq/0
> --rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
> + # ls -l /mnt/seq/0
> + -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
>
> The written file can be truncated to the zone size, preventing any further
> -write operation.
> +write operation::
>
> -# truncate -s 268435456 /mnt/seq/0
> -# ls -l /mnt/seq/0
> --rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
> + # truncate -s 268435456 /mnt/seq/0
> + # ls -l /mnt/seq/0
> + -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
>
> Truncation to 0 size allows freeing the file zone storage space and restart
> -append-writes to the file.
> +append-writes to the file::
>
> -# truncate -s 0 /mnt/seq/0
> -# ls -l /mnt/seq/0
> --rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
> + # truncate -s 0 /mnt/seq/0
> + # ls -l /mnt/seq/0
> + -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
>
> Since files are statically mapped to zones on the disk, the number of blocks of
> -a file as reported by stat() and fstat() indicates the size of the file zone.
> +a file as reported by stat() and fstat() indicates the size of the file zone::
>
> -# stat /mnt/seq/0
> - File: /mnt/seq/0
> - Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
> -Device: 870h/2160d Inode: 50431 Links: 1
> -Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
> -Access: 2019-11-25 13:23:57.048971997 +0900
> -Modify: 2019-11-25 13:52:25.553805765 +0900
> -Change: 2019-11-25 13:52:25.553805765 +0900
> - Birth: -
> + # stat /mnt/seq/0
> + File: /mnt/seq/0
> + Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
> + Device: 870h/2160d Inode: 50431 Links: 1
> + Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
> + Access: 2019-11-25 13:23:57.048971997 +0900
> + Modify: 2019-11-25 13:52:25.553805765 +0900
> + Change: 2019-11-25 13:52:25.553805765 +0900
> + Birth: -
>
> The number of blocks of the file ("Blocks") in units of 512B blocks gives the
> maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2020-02-18 4:01 ` Matthew Wilcox
-1 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 4:01 ` Matthew Wilcox
0 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: cluster-devel.redhat.com
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 4:01 ` Matthew Wilcox
0 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 4:01 ` Matthew Wilcox
0 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Chao Yu, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 4:01 ` Matthew Wilcox
0 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 4:01 ` Matthew Wilcox
0 siblings, 0 replies; 112+ messages in thread
From: Matthew Wilcox @ 2020-02-18 4:01 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
I think at least 90% of this material needs to be in admin-guide. Should
we create Documentation/admin-guide/filesystems/ and move most of these
files there?
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
2020-02-18 4:01 ` [Ocfs2-devel] " Matthew Wilcox
` (3 preceding siblings ...)
(?)
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://www.infradead.org/~mchehab/kernel_docs/
Cheers,
Mauro
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: cluster-devel.redhat.com
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://www.infradead.org/~mchehab/kernel_docs/
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://www.infradead.org/~mchehab/kernel_docs/
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Chao Yu, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://www.infradead.org/~mchehab/kernel_docs/
Cheers,
Mauro
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://www.infradead.org/~mchehab/kernel_docs/
Cheers,
Mauro
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-18 10:04 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-18 10:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Jonathan Corbet, Richard Weinberger, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
Em Mon, 17 Feb 2020 20:01:46 -0800
Matthew Wilcox <willy@infradead.org> escreveu:
> On Mon, Feb 17, 2020 at 05:11:46PM +0100, Mauro Carvalho Chehab wrote:
> > There are lots of plain text documents under Documentation/filesystems.
> >
> > Manually convert several of those to ReST and add them to the index file.
>
> I think at least 90% of this material needs to be in admin-guide. Should
> we create Documentation/admin-guide/filesystems/ and move most of these
> files there?
It makes sense to me. Yet, there are some of those files that contains
both user-facing and kernel-facing docs at the same place.
Btw, I found the same pattern on *several* other subsystems: when
someone is documenting some feature, it tends to document both kAPI,
uAPI and admin.
Right now, what we did so far on most places were to keep the stuff
together, as splitting them could sometimes be painful.
As we are too close to finish the ReST conversion[1], I would prefer to
first finish it.
Then, do a second pass at files outside the new directories (like
admin-guide), in order to better organize things, eventually splitting
some files into kAPI, uAPI and/or admin-guide.
[1] Looking at next-20200217, after my last doc patches applied on this tree:
https://urldefense.com/v3/__https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_docs_merged__;!!GqivPVa7Brio!PN17iKHJ9Upo42OevdJbg0MsoPoDzjKk42i88P-Eeph6Y9GmY9gBs_HXyiyhltIy5GV3Fw$
excluding (most) false positives, we have now only ~50 text files left to
convert:
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|sort|uniq -c|sort -n
$ echo -n "Total: "
$ dirname $(find Documentation/ -type f|grep -vE '\.(rst|svg|dot|py|awk|sh|pl|gitignore|S|yaml|c|inf|vim|modes)'|grep -vE '(Makefile|Kconfig|LICENSE|COPYING-logo|ChangeLog|CREDITS)'|grep -v devicetree/bindings|grep -vE 'Documentation/(ABI|features|output|SubmittingPatches|CodingStyle|logo.gif|dontdiff|sphinx/requirements.txt|admin-guide/kdump/gdbmacros.txt|admin-guide/aoe/udev.txt|EDID/hex|netlabel/draft-ietf-cipso-ipsecurity-01.txt|firmware_class/hotplug-script|target/target-export-device|networking/mac80211-auth-assoc-deauth.txt|sparc/oradax/dax-hv-api.txt)'|grep -v translations)|wc -l
1 Documentation/filesystems/cifs
1 Documentation/filesystems/configfs
1 Documentation/scsi
1 Documentation/virt/kvm/devices
2 Documentation/admin-guide
3 Documentation
6 Documentation/devicetree
6 Documentation/filesystems/caching
8 Documentation/RCU
21 Documentation/filesystems
Total: 50
Once we get this series merged, I'm planning to prepare and submit a second
series doing the conversion for the other ~20 filesystem files.
Btw, if you want to look how things will become after my patch series,
I'm keeping a html build after all my patch series at:
https://urldefense.com/v3/__https://www.infradead.org/*mchehab/kernel_docs/__;fg!!GqivPVa7Brio!PN17iKHJ9Upo42OevdJbg0MsoPoDzjKk42i88P-Eeph6Y9GmY9gBs_HXyiyhltL51oe3qA$
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
2020-02-18 10:04 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2020-02-19 9:32 ` Jonathan Corbet
-1 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Brandenburg, Jan Kara, Linux Doc Mailing List,
Martinet, Amir Goldstein, Copeland, David Howells, Mason,
linux-mtd, Dominique, Ilya Dryomov, linux-afs, Jan Kara,
Mike Marshall, Aota, cluster-devel, linux-nilfs, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, Naohiro,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 9:32 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: cluster-devel.redhat.com
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 9:32 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 9:32 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Chao Yu, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 9:32 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 9:32 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-02-19 9:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Brandenburg, Jan Kara, Linux Doc Mailing List,
Martinet, Amir Goldstein, Copeland, David Howells, Mason,
linux-mtd, Dominique, Ilya Dryomov, linux-afs, Jan Kara,
Mike Marshall, Aota, cluster-devel, linux-nilfs, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, Naohiro,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan
On Tue, 18 Feb 2020 11:04:06 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> Then, do a second pass at files outside the new directories (like
> admin-guide), in order to better organize things, eventually splitting
> some files into kAPI, uAPI and/or admin-guide.
I'm looking forward to this phase! Yes it is harder, and it often
requires selling the idea to skeptical maintainers. But that is how,
IMO, we get from where we're at now to something closer to a set of
coherent kernel docs.
Thanks,
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
2020-02-19 9:32 ` [Ocfs2-devel] " Jonathan Corbet
` (3 preceding siblings ...)
(?)
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: cluster-devel.redhat.com
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Chao Yu, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, Eric Van Hensbergen, ecryptfs,
Josef Bacik, Bob Peterson, Tigran A. Aivazian, David Sterba,
Jaegeuk Kim, ceph-devel, Ryusuke Konishi, Anton Altaparmakov,
Damien Le Moal, Luis de Bethencourt, Nicolas Pitre,
linux-ntfs-dev, Jeff Layton, linux-f2fs-devel, ocfs2-devel,
Jan Kara, linux-fsdevel, Phillip Lougher, Johannes Thumshirn,
linux-erofs, linux-karma-devel, linux-btrfs
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-02-19 15:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 112+ messages in thread
From: Mauro Carvalho Chehab @ 2020-02-19 15:11 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Chris Mason, linux-mtd,
Ilya Dryomov, linux-afs, Mike Marshall, Naohiro Aota,
Christoph Hellwig, linux-nilfs, Andreas Gruenbacher, Sage Weil,
Richard Weinberger, Matthew Wilcox, Tyler Hicks, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah
Em Wed, 19 Feb 2020 02:32:34 -0700
Jonathan Corbet <corbet@lwn.net> escreveu:
> On Tue, 18 Feb 2020 11:04:06 +0100
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > Then, do a second pass at files outside the new directories (like
> > admin-guide), in order to better organize things, eventually splitting
> > some files into kAPI, uAPI and/or admin-guide.
>
> I'm looking forward to this phase! Yes it is harder, and it often
> requires selling the idea to skeptical maintainers. But that is how,
> IMO, we get from where we're at now to something closer to a set of
> coherent kernel docs.
Yeah, fully agreed that this is an important step.
I'm even more anxious for a third phase: filling the gaps. I'm pretty sure
that several important parts of the Kernel aren't properly represented
at Documentation.
Yet, before start writing new things, we should first organizing what we
already have, making them well-organized.
Cheers,
Mauro
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
2020-02-17 16:11 ` [Ocfs2-devel] " Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2020-03-02 21:13 ` Jonathan Corbet
-1 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Joseph Qi, linux-mtd, Tyler Hicks,
linux-afs, Mike Marshall, Naohiro Aota, Christoph Hellwig,
linux-nilfs, Andreas Gruenbacher, Sage Weil, Richard Weinberger,
Mark Fasheh, Chris Mason, Ryusuke Konishi, cluster-devel,
v9fs-developer, Gao Xiang
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread* [Cluster-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-03-02 21:13 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: cluster-devel.redhat.com
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-03-02 21:13 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Joseph Qi, linux-mtd, Tyler Hicks,
linux-afs, Mike Marshall, Naohiro Aota, Christoph Hellwig,
linux-nilfs, Andreas Gruenbacher, Sage Weil, Richard Weinberger,
Mark Fasheh, Chris Mason, Ryusuke Konishi, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, ecryptfs, Eric Van Hensbergen,
Josef Bacik, linux-fsdevel, Joel Becker, Tigran A. Aivazian,
David Sterba, Jaegeuk Kim, ceph-devel, Ilya Dryomov,
Anton Altaparmakov, Damien Le Moal, Luis de Bethencourt,
Nicolas Pitre, linux-ntfs-dev, Jeff Layton, linux-f2fs-devel,
linux-btrfs, Jan Kara, Bob Peterson, Phillip Lougher,
Johannes Thumshirn, linux-erofs, linux-karma-devel, ocfs2-devel
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-03-02 21:13 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Joseph Qi, linux-mtd, Tyler Hicks,
linux-afs, Mike Marshall, Naohiro Aota, Christoph Hellwig,
linux-nilfs, Andreas Gruenbacher, Sage Weil, Richard Weinberger,
Mark Fasheh, Chris Mason, Ryusuke Konishi, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, ecryptfs, Eric Van Hensbergen, Chao Yu,
Josef Bacik, linux-fsdevel, Joel Becker, Tigran A. Aivazian,
David Sterba, Jaegeuk Kim, ceph-devel, Ilya Dryomov,
Anton Altaparmakov, Damien Le Moal, Luis de Bethencourt,
Nicolas Pitre, linux-ntfs-dev, Jeff Layton, linux-f2fs-devel,
linux-btrfs, Jan Kara, Bob Peterson, Phillip Lougher,
Johannes Thumshirn, linux-erofs, linux-karma-devel, ocfs2-devel
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 112+ messages in thread
* Re: [f2fs-dev] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-03-02 21:13 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Joseph Qi, linux-mtd, Tyler Hicks,
linux-afs, Mike Marshall, Naohiro Aota, Christoph Hellwig,
linux-nilfs, Andreas Gruenbacher, Sage Weil, Richard Weinberger,
Mark Fasheh, Chris Mason, Ryusuke Konishi, cluster-devel,
v9fs-developer, Gao Xiang, linux-ext4, Salah Triki,
Alexey Dobriyan, devel, ecryptfs, Eric Van Hensbergen,
Josef Bacik, linux-fsdevel, Joel Becker, Tigran A. Aivazian,
David Sterba, Jaegeuk Kim, ceph-devel, Ilya Dryomov,
Anton Altaparmakov, Damien Le Moal, Luis de Bethencourt,
Nicolas Pitre, linux-ntfs-dev, Jeff Layton, linux-f2fs-devel,
linux-btrfs, Jan Kara, Bob Peterson, Phillip Lougher,
Johannes Thumshirn, linux-erofs, linux-karma-devel, ocfs2-devel
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
^ permalink raw reply [flat|nested] 112+ messages in thread
* [Ocfs2-devel] [PATCH 00/44] Manually convert filesystem FS documents to ReST
@ 2020-03-02 21:13 ` Jonathan Corbet
0 siblings, 0 replies; 112+ messages in thread
From: Jonathan Corbet @ 2020-03-02 21:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Latchesar Ionkov, Martin Brandenburg, Jan Kara,
Linux Doc Mailing List, Dominique Martinet, Amir Goldstein,
Bob Copeland, David Howells, Joseph Qi, linux-mtd, Tyler Hicks,
linux-afs, Mike Marshall, Naohiro Aota, Christoph Hellwig,
linux-nilfs, Andreas Gruenbacher, Sage Weil, Richard Weinberger,
Mark Fasheh, Chris Mason, Ryusuke Konishi, cluster-devel,
v9fs-developer, Gao Xiang
On Mon, 17 Feb 2020 17:11:46 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> There are lots of plain text documents under Documentation/filesystems.
>
> Manually convert several of those to ReST and add them to the index file.
OK, I've finally managed to add all the acks and wrestle this pile into
docs-next - thanks.
jon
^ permalink raw reply [flat|nested] 112+ messages in thread