All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@arm.com>
To: Andrii Anisov <andrii.anisov@gmail.com>
Cc: xen-devel@lists.xenproject.org,
	Stefano Stabellini <sstabellini@kernel.org>,
	Andrii Anisov <andrii_anisov@epam.com>
Subject: Re: [RFC 13/16] gic-vgic: skip irqs locking
Date: Wed, 12 Dec 2018 12:07:06 +0000	[thread overview]
Message-ID: <445b8bb4-78fb-124a-647b-8e8d253b7ba1@arm.com> (raw)
In-Reply-To: <1543440731-21947-14-git-send-email-andrii.anisov@gmail.com>

Hi,

On 28/11/2018 21:32, Andrii Anisov wrote:
> From: Andrii Anisov <andrii_anisov@epam.com>
> 
> Those fucntions are called under IRQs disabled already, so avoid

s/fucntions/

> additional flags saving and restore.
> 
> Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
> ---
>   xen/arch/arm/gic-vgic.c | 10 ++++------
>   1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/xen/arch/arm/gic-vgic.c b/xen/arch/arm/gic-vgic.c
> index 5b73bbd..e511f91 100644
> --- a/xen/arch/arm/gic-vgic.c
> +++ b/xen/arch/arm/gic-vgic.c
> @@ -268,7 +268,6 @@ static void gic_update_one_lr(struct vcpu *v, int i)
>   void vgic_sync_from_lrs(struct vcpu *v)
>   {
>       int i = 0;
> -    unsigned long flags;
>       unsigned int nr_lrs = gic_get_nr_lrs();
>   
>       /* The idle domain has no LRs to be cleared. Since gic_restore_state
> @@ -279,7 +278,7 @@ void vgic_sync_from_lrs(struct vcpu *v)
>   
>       gic_hw_ops->update_hcr_status(GICH_HCR_UIE, false);
>   
> -    spin_lock_irqsave(&v->arch.vgic.lock, flags);
> +    spin_lock(&v->arch.vgic.lock);

This chunk relies on patch #1, am I correct? If so, this should be written in 
the commit message that this was introduced recently. This helps to figure out 
whether the patch can be merged before the rest.

>   
>       while ((i = find_next_bit((const unsigned long *) &this_cpu(lr_mask),
>                                 nr_lrs, i)) < nr_lrs ) {
> @@ -287,7 +286,7 @@ void vgic_sync_from_lrs(struct vcpu *v)
>           i++;
>       }
>   
> -    spin_unlock_irqrestore(&v->arch.vgic.lock, flags);
> +    spin_unlock(&v->arch.vgic.lock);
>   }
>   
>   static void gic_restore_pending_irqs(struct vcpu *v)
> @@ -295,11 +294,10 @@ static void gic_restore_pending_irqs(struct vcpu *v)
>       int lr = 0;
>       struct pending_irq *p, *t, *p_r;
>       struct list_head *inflight_r;
> -    unsigned long flags;
>       unsigned int nr_lrs = gic_get_nr_lrs();
>       int lrs = nr_lrs;
>   
> -    spin_lock_irqsave(&v->arch.vgic.lock, flags);
> +    spin_lock(&v->arch.vgic.lock);

I would add an ASSERT(!local_is_irq_enabled()) on top to show that this should 
be called with interrupt disabled.

>   
>       if ( list_empty(&v->arch.vgic.lr_pending) )
>           goto out;
> @@ -343,7 +341,7 @@ found:
>       }
>   
>   out:
> -    spin_unlock_irqrestore(&v->arch.vgic.lock, flags);
> +    spin_unlock(&v->arch.vgic.lock);
>   }
>   
>   void gic_clear_pending_irqs(struct vcpu *v)
> 

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  reply	other threads:[~2018-12-12 12:07 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1543440731-21947-1-git-send-email-andrii.anisov@gmail.com>
2018-11-28 21:31 ` [RFC 01/16] xen/arm: Re-enable interrupt later in the trap path Andrii Anisov
2018-11-28 22:00   ` Julien Grall
2019-07-30 17:34     ` [Xen-devel] " Andrii Anisov
2019-07-30 20:46       ` Julien Grall
2018-11-28 21:31 ` [RFC 02/16] hack: drop GIC v3 support Andrii Anisov
2018-11-29 12:08   ` Andre Przywara
2018-11-28 21:31 ` [RFC 03/16] vgic: move pause_flags check out of vgic spinlock Andrii Anisov
2018-11-28 22:02   ` Julien Grall
2018-11-28 21:31 ` [RFC 04/16] vgic: move irq_to_pending out of lock Andrii Anisov
2018-11-29 11:07   ` Julien Grall
2018-11-28 21:32 ` [RFC 05/16] gic-vgic: Drop an excessive clear_lrs Andrii Anisov
2018-12-11 14:33   ` Julien Grall
2018-12-12 11:01     ` Andrii Anisov
2018-12-12 11:55       ` Julien Grall
2018-11-28 21:32 ` [RFC 06/16] gic: drop interrupts enabling on interrupts processing Andrii Anisov
2018-11-28 22:06   ` Julien Grall
2018-12-12 12:10     ` Julien Grall
2018-11-28 21:32 ` [RFC 07/16] gic-vgic:vgic: do not keep disabled IRQs in any of queues Andrii Anisov
2018-11-28 21:32 ` [RFC 08/16] gic: separate ppi processing Andrii Anisov
2018-12-12 12:37   ` Andrii Anisov
2018-12-12 12:46     ` Julien Grall
2018-12-12 12:52       ` Andrii Anisov
2018-12-12 13:46         ` Julien Grall
2018-11-28 21:32 ` [RFC 09/16] gic-vgic:vgic: avoid excessive conversions Andrii Anisov
2018-11-29 10:23   ` Julien Grall
2018-11-28 21:32 ` [RFC 10/16] gic:vgic:gic-vgic: introduce non-atomic bitops Andrii Anisov
2018-11-29 12:14   ` Andre Przywara
2018-11-29 16:07     ` Julien Grall
2018-12-03 12:33     ` Andrii Anisov
2018-12-03 12:58       ` Julien Grall
2018-12-03 13:05         ` Andrii Anisov
2018-12-03 13:08           ` Julien Grall
2018-12-03 16:37       ` Andre Przywara
2018-11-28 21:32 ` [RFC 11/16] irq: skip action avalability check for guest's IRQ Andrii Anisov
2018-12-11 14:48   ` Julien Grall
2018-12-12 11:30     ` Andrii Anisov
2018-12-12 11:59       ` Julien Grall
2018-12-12 13:51         ` Andrii Anisov
2018-12-12 14:49           ` Julien Grall
2018-12-12 14:58             ` Andrii Anisov
2018-12-12 15:08               ` Julien Grall
2018-12-12 15:57                 ` Andrii Anisov
2018-11-28 21:32 ` [RFC 12/16] gic-v2: Write HCR only on change Andrii Anisov
2018-11-29 16:36   ` Julien Grall
2018-11-28 21:32 ` [RFC 13/16] gic-vgic: skip irqs locking Andrii Anisov
2018-12-12 12:07   ` Julien Grall [this message]
2018-12-12 12:35     ` Andrii Anisov
2018-12-12 12:44       ` Julien Grall
2018-12-12 12:47         ` Andrii Anisov
2018-11-28 21:32 ` [RFC 14/16] hack: arm/domain: simplify context restore from idle vcpu Andrii Anisov
2018-11-29 15:53   ` Julien Grall
2018-11-29 16:00   ` Wei Liu
2018-11-28 21:32 ` [RFC 15/16] hack: move gicv2 LRs reads and writes out of spinlocks Andrii Anisov
2018-11-28 21:58   ` Julien Grall
2018-11-28 21:32 ` [RFC 16/16] gic: vgic: align frequently accessed data by cache line size Andrii Anisov
2018-11-29 16:24   ` Julien Grall
2018-11-29  7:40 ` [RFC 00/16] Old GIC (gic-vgic) optimizations for GICV2 Andrii Anisov
2018-11-29 11:00   ` Julien Grall
2018-11-29 12:07   ` Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=445b8bb4-78fb-124a-647b-8e8d253b7ba1@arm.com \
    --to=julien.grall@arm.com \
    --cc=andrii.anisov@gmail.com \
    --cc=andrii_anisov@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.