* 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef)
@ 2006-06-25 15:30 Udo van den Heuvel
0 siblings, 0 replies; only message in thread
From: Udo van den Heuvel @ 2006-06-25 15:30 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide
Hello Jeff and others,
While 2.6.16.2 runs quite OK on my VIA SP8000 Epia system, 2.6.17 gives
(with the same config where possible) a sata problem on bootup, it gives
a via_sata timeout(cmd 0xef). (the letters were small to make the stuff
not scroll off the TV)
Immediately rebooting into 2.6.16.2 gives a nice clean bootup.
The drive is a SAMSUNG HD160JJ. Hardware has not changed and the .config
for the kernel compile was not modified except for version differences.
Did I miss something? Is my hardware starting te get picky about linux
kernel version numbers? Or getting defective?
Any ideas?
Kind regards,
Udo
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-06-25 15:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-06-25 15:30 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) Udo van den Heuvel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.