* [PATCH 2/12] qe_lib: Add common files
@ 2006-09-28 8:18 Li Yang
0 siblings, 0 replies; only message in thread
From: Li Yang @ 2006-09-28 8:18 UTC (permalink / raw)
To: paulus, galak; +Cc: linuxppc-dev
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/Makefile | 1
arch/powerpc/sysdev/qe_lib/Kconfig | 29 ++
arch/powerpc/sysdev/qe_lib/Makefile | 8 +
arch/powerpc/sysdev/qe_lib/qe_common.c | 362 ++++++++++++++++++++++++
include/asm-powerpc/qe.h | 487 ++++++++++++++++++++++++++++++++
5 files changed, 887 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index e5e999e..c6e5b31 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
new file mode 100644
index 0000000..28487e4
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -0,0 +1,29 @@
+#
+# QE Communication options
+#
+
+menu "QE Options"
+ depends on QUICC_ENGINE
+
+config UCC_SLOW
+ bool "UCC Slow Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool "UCC Fast Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+endmenu
+
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
new file mode 100644
index 0000000..9a54a81
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe_common.o qe.o qe_ic.o qe_io.o
+
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o ucc_slow.o
diff --git a/arch/powerpc/sysdev/qe_lib/qe_common.c b/arch/powerpc/sysdev/qe_lib/qe_common.c
new file mode 100644
index 0000000..0f59049
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_common.c
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+/* QE snum state
+*/
+typedef enum qe_snum_state {
+ QE_SNUM_STATE_USED, /* used */
+ QE_SNUM_STATE_FREE /* free */
+} qe_snum_state_e;
+
+/* QE snum
+*/
+typedef struct qe_snum {
+ u8 num; /* snum */
+ qe_snum_state_e state; /* state */
+} qe_snum_t;
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+EXPORT_SYMBOL(qe_immr);
+qe_map_t *qe_immr = NULL;
+static qe_snum_t snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = (qe_map_t *) ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+EXPORT_SYMBOL(qe_issue_cmd);
+int qe_issue_cmd(uint cmd, uint device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u32 cecr;
+ u8 mcn_shift = 0, dev_shift = 0;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr,
+ immrbar_virt_to_phys((void *)cmd_input));
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ do {
+ cecr = in_be32(&qe_immr->cp.cecr);
+ } while (cecr & QE_CR_FLG);
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return 0;
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+ struct device_node *qe;
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ u32 *prop = (u32 *) get_property(qe, "brg-frequency", &size);
+ brg_clk = *prop;
+ of_node_put(qe);
+ };
+ return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+ u32 divisor;
+ int div16 = 0;
+
+ bp = (uint *) & qe_immr->brg.brgc1;
+ bp += brg;
+
+ divisor = (get_brg_clk() / rate);
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = 1;
+ divisor /= 16;
+ }
+
+ *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+ if (div16)
+ *bp |= QE_BRGC_DIV16;
+}
+
+static void qe_snums_init(void)
+{
+ int i;
+
+ /* Initialize the SNUMs array. */
+ for (i = 0; i < QE_NUM_OF_SNUM; i++)
+ snums[i].state = QE_SNUM_STATE_FREE;
+
+ /* Initialize SNUMs (thread serial numbers) according to QE
+ * spec chapter 4, SNUM table */
+ i = 0;
+ snums[i++].num = 0x04;
+ snums[i++].num = 0x05;
+ snums[i++].num = 0x0C;
+ snums[i++].num = 0x0D;
+ snums[i++].num = 0x14;
+ snums[i++].num = 0x15;
+ snums[i++].num = 0x1C;
+ snums[i++].num = 0x1D;
+ snums[i++].num = 0x24;
+ snums[i++].num = 0x25;
+ snums[i++].num = 0x2C;
+ snums[i++].num = 0x2D;
+ snums[i++].num = 0x34;
+ snums[i++].num = 0x35;
+ snums[i++].num = 0x88;
+ snums[i++].num = 0x89;
+ snums[i++].num = 0x98;
+ snums[i++].num = 0x99;
+ snums[i++].num = 0xA8;
+ snums[i++].num = 0xA9;
+ snums[i++].num = 0xB8;
+ snums[i++].num = 0xB9;
+ snums[i++].num = 0xC8;
+ snums[i++].num = 0xC9;
+ snums[i++].num = 0xD8;
+ snums[i++].num = 0xD9;
+ snums[i++].num = 0xE8;
+ snums[i++].num = 0xE9;
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ sdma_t *sdma = &qe_immr->sdma;
+ uint sdma_buf_offset;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ if (IS_MURAM_ERR(sdma_buf_offset))
+ return -ENOMEM;
+
+ out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+ QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+ struct device_node *np;
+ u32 address;
+ u64 size;
+ unsigned int flags;
+
+ /* initialize the info header */
+ rh_init(&qe_muram_info, 1,
+ sizeof(qe_boot_muram_rh_block) /
+ sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+ /* Attach the usable muram area */
+ /* XXX: This is a subset of the available muram. It
+ * varies with the processor and the microcode patches activated.
+ */
+ if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+ address = *of_get_address(np, 0, &size, &flags);
+ of_node_put(np);
+ rh_attach_region(&qe_muram_info,
+ (void *)address, (int)size);
+ }
+}
+
+/* This function returns an index into the MURAM area.
+ */
+uint qe_muram_alloc(uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (uint) start;
+}
+
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(uint offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ ret = rh_free(&qe_muram_info, (void *)offset);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+uint qe_muram_alloc_fixed(uint offset, uint size)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start =
+ rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (uint) start;
+}
+
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+ rh_dump(&qe_muram_info);
+}
+
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(uint offset)
+{
+ return (void *)&qe_immr->muram[offset];
+}
+
+EXPORT_SYMBOL(qe_muram_addr);
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 0000000..0dfa5de
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,487 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __QE_H__
+#define __QE_H__
+
+#include <asm/immap_qe.h>
+
+static inline long IS_MURAM_ERR(const uint offset)
+{
+ return (uint) offset > (uint) - 1000L;
+}
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+int qe_issue_cmd(uint cmd, uint device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(uint brg, uint rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+uint qe_muram_alloc(uint size, uint align);
+int qe_muram_free(uint offset);
+uint qe_muram_alloc_fixed(uint offset, uint size);
+void qe_muram_dump(void);
+void *qe_muram_addr(uint offset);
+/* Buffer descriptors.
+*/
+typedef struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed)) qe_bd_t;
+
+#define QE_SIZEOF_BD sizeof(qe_bd_t)
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+#define BD_BUFFER_ARG(bd) ((qe_bd_t *)bd)->buf
+#define BD_BUFFER_CLEAR(bd) out_be32(&(BD_BUFFER_ARG(bd)), 0);
+#define BD_BUFFER(bd) in_be32(&(BD_BUFFER_ARG(bd)))
+#define BD_STATUS_AND_LENGTH_SET(bd, val) out_be32((u32*)bd, val)
+#define BD_STATUS_AND_LENGTH(bd) in_be32((u32*)bd)
+#define BD_BUFFER_SET(bd, buffer) out_be32(&(BD_BUFFER_ARG(bd)), \
+ (u32)(buffer))
+/* Macro for retrieving the following BD.
+ example:
+ next = BD_GET_NEXT( currBd, bdStatus, bdBase, SIZEOF_MY_BD, T_W ) */
+#define BD_GET_NEXT( curr_bd, bd_status, bd_base, bd_len, last_bd ) \
+ ( (!((bd_status) & (last_bd))) ? ((curr_bd)+(bd_len)) : (bd_base) )
+
+/* Alignments
+*/
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation
+*/
+typedef enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose RISC 1 or
+ RISC 2 */
+} qe_risc_allocation_e;
+
+/* QE extended filtering Table Lookup Key Size
+*/
+typedef enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+} qe_fltr_tbl_lookup_key_size_e;
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size
+*/
+typedef enum qe_fltr_largest_external_tbl_lookup_key_size_ {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES /* 16 bytes */
+} qe_fltr_largest_external_tbl_lookup_key_size_e;
+
+/* structure representing QE parameter RAM
+*/
+typedef struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed)) qe_timer_tables_t;
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD)
+*/
+typedef struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed)) qe_fltr_tad_t;
+
+/* Communication Direction.
+*/
+typedef enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+} comm_dir_e;
+
+/* Clocks and GRG's
+*/
+typedef enum qe_clock {
+ QE_CLK_NONE = 0
+ , QE_BRG1 /* Baud Rate Generator 1 */
+ , QE_BRG2 /* Baud Rate Generator 2 */
+ , QE_BRG3 /* Baud Rate Generator 3 */
+ , QE_BRG4 /* Baud Rate Generator 4 */
+ , QE_BRG5 /* Baud Rate Generator 5 */
+ , QE_BRG6 /* Baud Rate Generator 6 */
+ , QE_BRG7 /* Baud Rate Generator 7 */
+ , QE_BRG8 /* Baud Rate Generator 8 */
+ , QE_BRG9 /* Baud Rate Generator 9 */
+ , QE_BRG10 /* Baud Rate Generator 10 */
+ , QE_BRG11 /* Baud Rate Generator 11 */
+ , QE_BRG12 /* Baud Rate Generator 12 */
+ , QE_BRG13 /* Baud Rate Generator 13 */
+ , QE_BRG14 /* Baud Rate Generator 14 */
+ , QE_BRG15 /* Baud Rate Generator 15 */
+ , QE_BRG16 /* Baud Rate Generator 16 */
+ , QE_CLK1 /* Clock 1 */
+ , QE_CLK2 /* Clock 2 */
+ , QE_CLK3 /* Clock 3 */
+ , QE_CLK4 /* Clock 4 */
+ , QE_CLK5 /* Clock 5 */
+ , QE_CLK6 /* Clock 6 */
+ , QE_CLK7 /* Clock 7 */
+ , QE_CLK8 /* Clock 8 */
+ , QE_CLK9 /* Clock 9 */
+ , QE_CLK10 /* Clock 10 */
+ , QE_CLK11 /* Clock 11 */
+ , QE_CLK12 /* Clock 12 */
+ , QE_CLK13 /* Clock 13 */
+ , QE_CLK14 /* Clock 14 */
+ , QE_CLK15 /* Clock 15 */
+ , QE_CLK16 /* Clock 16 */
+ , QE_CLK17 /* Clock 17 */
+ , QE_CLK18 /* Clock 18 */
+ , QE_CLK19 /* Clock 19 */
+ , QE_CLK20 /* Clock 20 */
+ , QE_CLK21 /* Clock 21 */
+ , QE_CLK22 /* Clock 22 */
+ , QE_CLK23 /* Clock 23 */
+ , QE_CLK24 /* Clock 24 */
+ , QE_CLK_DUMMY
+} qe_clock_e;
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
+*/
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order
+*/
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register
+*/
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC
+*/
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC
+*/
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM
+*/
+typedef struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed)) ucc_slow_pram_t;
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL)
+*/
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register
+*/
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE)
+*/
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF| \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY|UCC_SLOW_UCCE_GRA| \
+ UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV|UCC_SLOW_UCCE_GINT| \
+ UCC_SLOW_UCCE_GUN|UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT| \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* Transmit On Demand (UTORD)
+*/
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks.
+*/
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __QE_H__ */
+#endif /* __KERNEL__ */
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2006-09-28 8:18 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-09-28 8:18 [PATCH 2/12] qe_lib: Add common files Li Yang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.