[PATCH V2 1/2] btp: Update connect event structure

[PATCH V2 1/2] btp: Update connect event structure

[Tedd Ho-Jeong An]

From: Tedd Ho-Jeong An <tedd.an@intel.com>

This patch updates the connect event struct to align withe the btp spec.

  Opcode 0x82 - Device Connected event
    Controller Index:   <controller id>
    Event parameters:   Address_Type (1 octet)
                        Address (6 octets)
                        Connection Interval (2 octets)
                        Connection Latency (2 octets)
                        Supervision Timeout (2 octets)

  This event indicates that a device was connected.
---
 src/shared/btp.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/src/shared/btp.h b/src/shared/btp.h
index f0ac3a1ee..cc71a71df 100644
--- a/src/shared/btp.h
+++ b/src/shared/btp.h
@@ -259,6 +259,9 @@ struct btp_device_found_ev {
 struct btp_gap_device_connected_ev {
 	uint8_t address_type;
 	bdaddr_t address;
+	uint16_t connection_interval;
+	uint16_t connection_latency;
+	uint16_t supervision_timeout;
 } __packed;
 
 #define BTP_EV_GAP_DEVICE_DISCONNECTED		0x83
-- 
2.25.4

[PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[Tedd Ho-Jeong An]

From: Tedd Ho-Jeong An <tedd.an@intel.com>

There are a few test cases for limited discovery in GAP qualification
test suite. But the d-bus API doesn't support it and the only way to
start the limited discovery is using the management API.

This patch adds support for limited discovery by using management API.
---
 tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 187 insertions(+), 7 deletions(-)

diff --git a/tools/btpclient.c b/tools/btpclient.c
index f9c693056..46f866117 100644
--- a/tools/btpclient.c
+++ b/tools/btpclient.c
@@ -36,6 +36,10 @@
 #include "lib/bluetooth.h"
 #include "src/shared/btp.h"
 
+/* For BT_MGMT API */
+#include "lib/mgmt.h"
+#include "src/shared/mgmt.h"
+
 #define AD_PATH "/org/bluez/advertising"
 #define AG_PATH "/org/bluez/agent"
 #define AD_IFACE "org.bluez.LEAdvertisement1"
@@ -77,6 +81,14 @@ static struct btp *btp;
 
 static bool gap_service_registered;
 
+/* For BT_MGMT API */
+static struct mgmt *mgmt;
+static uint16_t mgmt_index;
+
+static uint32_t mgmt_flags;
+
+#define MGMT_OPS_DISCOVERY	0x01
+
 struct ad_data {
 	uint8_t data[25];
 	uint8_t len;
@@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct l_dbus_proxy *proxy,
 					start_discovery_reply, NULL, NULL);
 }
 
+#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
+#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 << BDADDR_LE_RANDOM))
+#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
+
+struct discovery_flags {
+	uint8_t flags;
+};
+
+static int btp_mgmt_start_limited_discovery(uint8_t flags)
+{
+	struct mgmt_cp_start_discovery cp;
+	uint8_t type = SCAN_TYPE_DUAL;
+
+	memset(&cp, 0, sizeof(cp));
+
+	if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
+		     BTP_GAP_DISCOVERY_FLAG_BREDR)) {
+		type = SCAN_TYPE_DUAL;
+	} else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
+		type &= ~SCAN_TYPE_BREDR;
+		type |= SCAN_TYPE_LE;
+	} else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
+		type |= SCAN_TYPE_BREDR;
+		type &= ~SCAN_TYPE_LE;
+	}
+	cp.type = type;
+
+	return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY, mgmt_index,
+			 sizeof(cp), &cp, NULL, NULL, NULL);
+}
+
+static void btp_mgmt_discovering_destroy(void *user_data)
+{
+	l_free(user_data);
+}
+
+static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
+				    const void *param, void *user_data)
+{
+	const struct mgmt_ev_discovering *ev = param;
+	struct discovery_flags *df = user_data;
+
+	if (len < sizeof(*ev)) {
+		l_error("Too short (%u bytes) discovering event", len);
+		return;
+	}
+
+	l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
+
+	/* Start new discovery */
+	if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
+		btp_mgmt_start_limited_discovery(df->flags);
+}
+
+static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t flags)
+{
+	int ret;
+	struct discovery_flags *df;
+
+	/* Saves the flags so it can be used to start new discovery */
+	df = l_new(struct discovery_flags, 1);
+	df->flags = flags;
+
+	/* Register event for discovering */
+	mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
+		      btp_mgmt_discovering_cb, df,
+		      btp_mgmt_discovering_destroy);
+
+	ret = btp_mgmt_start_limited_discovery(flags);
+	if (ret == 0) {
+		l_error("Unable to send start_discovery cmd");
+		btp_send_error(btp, BTP_GAP_SERVICE, index, BTP_ERROR_FAIL);
+		return;
+	}
+
+	/* Set flag that mgmt interface is used for scanning */
+	mgmt_flags |= MGMT_OPS_DISCOVERY;
+
+	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
+		 index, 0, NULL);
+}
+
 static void btp_gap_start_discovery(uint8_t index, const void *param,
 					uint16_t length, void *user_data)
 {
@@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t index, const void *param,
 		return;
 	}
 
-	l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
-						set_discovery_filter_setup,
-						set_discovery_filter_reply,
-						L_UINT_TO_PTR(cp->flags), NULL);
+	/* Use BT MGMT interface to start limited discovery procedure since
+	 * it is not supported by D-BUS API
+	 */
+	if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
+		btp_mgmt_setup_limited_discovery(index, cp->flags);
+	else {
+		l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
+					 set_discovery_filter_setup,
+					 set_discovery_filter_reply,
+					 L_UINT_TO_PTR(cp->flags), NULL);
+	}
 }
 
 static void clear_discovery_filter_setup(struct l_dbus_message *message,
@@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct l_dbus_proxy *proxy,
 						NULL, NULL);
 }
 
+static void btp_mgmt_stop_discovery(uint8_t index)
+{
+	struct mgmt_cp_stop_discovery cp;
+	int ret;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.type = SCAN_TYPE_DUAL;
+
+	ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index, sizeof(cp),
+			&cp, NULL, NULL, NULL);
+	if (ret == 0) {
+		l_error("Unable to send stop_discovery cmd");
+		btp_send_error(btp, BTP_GAP_SERVICE, index, BTP_ERROR_FAIL);
+		return;
+	}
+
+	/* Clear flag that mgmt interface is used for scanning */
+	mgmt_flags &= ~MGMT_OPS_DISCOVERY;
+
+	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
+		 index, 0, NULL);
+}
+
 static void btp_gap_stop_discovery(uint8_t index, const void *param,
 					uint16_t length, void *user_data)
 {
@@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index, const void *param,
 		return;
 	}
 
-	l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
-					stop_discovery_reply, NULL, NULL);
+	/* If the discovery procedure is started by BT MGMT API for limited
+	 * discovering, it should be stopped by mgmt API.
+	 */
+	if (mgmt_flags & MGMT_OPS_DISCOVERY)
+		btp_mgmt_stop_discovery(index);
+	else
+		l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
+					 stop_discovery_reply, NULL, NULL);
 }
 
 static void connect_reply(struct l_dbus_proxy *proxy,
@@ -3140,6 +3270,7 @@ static void usage(void)
 	l_info("\tbtpclient [options]");
 	l_info("options:\n"
 	"\t-s, --socket <socket>  Socket to use for BTP\n"
+	"\t-i, --index <id>       Specify the adapter index\n"
 	"\t-q, --quiet            Don't emit any logs\n"
 	"\t-v, --version          Show version\n"
 	"\t-h, --help             Show help options");
@@ -3147,12 +3278,52 @@ static void usage(void)
 
 static const struct option options[] = {
 	{ "socket",	1, 0, 's' },
+	{ "index",	1, 0, 'i' },
 	{ "quiet",	0, 0, 'q' },
 	{ "version",	0, 0, 'v' },
 	{ "help",	0, 0, 'h' },
 	{ 0, 0, 0, 0 }
 };
 
+static void set_index(const char *arg)
+{
+	/* Use default index 0 */
+	if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
+						!strcmp(arg, "all"))
+		mgmt_index = MGMT_INDEX_NONE;
+	else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
+		mgmt_index = atoi(&arg[3]);
+	else
+		mgmt_index = atoi(arg);
+}
+
+static int btp_mgmt_init(const char *index_opt)
+{
+	mgmt = mgmt_new_default();
+	if (!mgmt) {
+		l_info("Unable to open mgmt_socket\n");
+		return EXIT_FAILURE;
+	}
+
+	if (index_opt)
+		set_index(index_opt);
+
+	if (mgmt_index == MGMT_INDEX_NONE)
+		mgmt_index = 0;
+
+	return EXIT_SUCCESS;
+}
+
+static void btp_mgmt_release(void)
+{
+	l_error("MGMT: Release all management resources");
+	mgmt_cancel_all(mgmt);
+	mgmt_unregister_all(mgmt);
+	mgmt_unref(mgmt);
+}
+
+static const char *index_opt;
+
 int main(int argc, char *argv[])
 {
 	struct l_dbus_client *client;
@@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
 
 	l_log_set_stderr();
 
-	while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) != -1) {
+	while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
+								NULL)) != -1) {
 		switch (opt) {
 		case 's':
 			socket_path = l_strdup(optarg);
@@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
 		case 'v':
 			l_info("%s", VERSION);
 			return EXIT_SUCCESS;
+		case 'i':
+			index_opt = l_strdup(optarg);
+			break;
 		case 'h':
 		default:
 			usage();
@@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
 	if (!l_main_init())
 		return EXIT_FAILURE;
 
+	if (btp_mgmt_init(index_opt)) {
+		l_error("Unable to initialize the management interface");
+		return EXIT_FAILURE;
+	}
 
 	adapters = l_queue_new();
 
@@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
 	l_dbus_client_destroy(client);
 	l_dbus_destroy(dbus);
 	btp_cleanup(btp);
+	btp_mgmt_release();
 
 	l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free);
 
-- 
2.25.4

Re: [PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[Szymon Janc]

Hi Ted,

On Friday, 5 June 2020 08:10:03 CEST Tedd Ho-Jeong An wrote:
> From: Tedd Ho-Jeong An <tedd.an@intel.com>
> 
> There are a few test cases for limited discovery in GAP qualification
> test suite. But the d-bus API doesn't support it and the only way to
> start the limited discovery is using the management API.
> 
> This patch adds support for limited discovery by using management API.

Isn't it enough by spec to check if limited discoverable flag is set?
We provide this info in AdvertisingFlags so we should be conforming.

Also, if we want to be able to explicitly do Limited Discovery this should be 
added to SetDiscoveryFilter so that btpclient can stay D-Bus only.

> ---
>  tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 187 insertions(+), 7 deletions(-)
> 
> diff --git a/tools/btpclient.c b/tools/btpclient.c
> index f9c693056..46f866117 100644
> --- a/tools/btpclient.c
> +++ b/tools/btpclient.c
> @@ -36,6 +36,10 @@
>  #include "lib/bluetooth.h"
>  #include "src/shared/btp.h"
> 
> +/* For BT_MGMT API */
> +#include "lib/mgmt.h"
> +#include "src/shared/mgmt.h"
> +
>  #define AD_PATH "/org/bluez/advertising"
>  #define AG_PATH "/org/bluez/agent"
>  #define AD_IFACE "org.bluez.LEAdvertisement1"
> @@ -77,6 +81,14 @@ static struct btp *btp;
> 
>  static bool gap_service_registered;
> 
> +/* For BT_MGMT API */
> +static struct mgmt *mgmt;
> +static uint16_t mgmt_index;
> +
> +static uint32_t mgmt_flags;
> +
> +#define MGMT_OPS_DISCOVERY	0x01
> +
>  struct ad_data {
>  	uint8_t data[25];
>  	uint8_t len;
> @@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct
> l_dbus_proxy *proxy, start_discovery_reply, NULL, NULL);
>  }
> 
> +#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
> +#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 << BDADDR_LE_RANDOM))
> +#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
> +
> +struct discovery_flags {
> +	uint8_t flags;
> +};
> +
> +static int btp_mgmt_start_limited_discovery(uint8_t flags)
> +{
> +	struct mgmt_cp_start_discovery cp;
> +	uint8_t type = SCAN_TYPE_DUAL;
> +
> +	memset(&cp, 0, sizeof(cp));
> +
> +	if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
> +		     BTP_GAP_DISCOVERY_FLAG_BREDR)) {
> +		type = SCAN_TYPE_DUAL;
> +	} else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
> +		type &= ~SCAN_TYPE_BREDR;
> +		type |= SCAN_TYPE_LE;
> +	} else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
> +		type |= SCAN_TYPE_BREDR;
> +		type &= ~SCAN_TYPE_LE;
> +	}
> +	cp.type = type;
> +
> +	return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY, mgmt_index,
> +			 sizeof(cp), &cp, NULL, NULL, NULL);
> +}
> +
> +static void btp_mgmt_discovering_destroy(void *user_data)
> +{
> +	l_free(user_data);
> +}
> +
> +static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
> +				    const void *param, void 
*user_data)
> +{
> +	const struct mgmt_ev_discovering *ev = param;
> +	struct discovery_flags *df = user_data;
> +
> +	if (len < sizeof(*ev)) {
> +		l_error("Too short (%u bytes) discovering event", len);
> +		return;
> +	}
> +
> +	l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
> +
> +	/* Start new discovery */
> +	if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
> +		btp_mgmt_start_limited_discovery(df->flags);
> +}
> +
> +static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t flags)
> +{
> +	int ret;
> +	struct discovery_flags *df;
> +
> +	/* Saves the flags so it can be used to start new discovery */
> +	df = l_new(struct discovery_flags, 1);
> +	df->flags = flags;
> +
> +	/* Register event for discovering */
> +	mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
> +		      btp_mgmt_discovering_cb, df,
> +		      btp_mgmt_discovering_destroy);
> +
> +	ret = btp_mgmt_start_limited_discovery(flags);
> +	if (ret == 0) {
> +		l_error("Unable to send start_discovery cmd");
> +		btp_send_error(btp, BTP_GAP_SERVICE, index, 
BTP_ERROR_FAIL);
> +		return;
> +	}
> +
> +	/* Set flag that mgmt interface is used for scanning */
> +	mgmt_flags |= MGMT_OPS_DISCOVERY;
> +
> +	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
> +		 index, 0, NULL);
> +}
> +
>  static void btp_gap_start_discovery(uint8_t index, const void *param,
>  					uint16_t length, void 
*user_data)
>  {
> @@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t index,
> const void *param, return;
>  	}
> 
> -	l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
> -						
set_discovery_filter_setup,
> -						
set_discovery_filter_reply,
> -						L_UINT_TO_PTR(cp-
>flags), NULL);
> +	/* Use BT MGMT interface to start limited discovery procedure since
> +	 * it is not supported by D-BUS API
> +	 */
> +	if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
> +		btp_mgmt_setup_limited_discovery(index, cp->flags);
> +	else {
> +		l_dbus_proxy_method_call(adapter->proxy, 
"SetDiscoveryFilter",
> +					 set_discovery_filter_setup,
> +					 set_discovery_filter_reply,
> +					 L_UINT_TO_PTR(cp->flags), 
NULL);
> +	}
>  }
> 
>  static void clear_discovery_filter_setup(struct l_dbus_message *message,
> @@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct l_dbus_proxy
> *proxy, NULL, NULL);
>  }
> 
> +static void btp_mgmt_stop_discovery(uint8_t index)
> +{
> +	struct mgmt_cp_stop_discovery cp;
> +	int ret;
> +
> +	memset(&cp, 0, sizeof(cp));
> +	cp.type = SCAN_TYPE_DUAL;
> +
> +	ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index, 
sizeof(cp),
> +			&cp, NULL, NULL, NULL);
> +	if (ret == 0) {
> +		l_error("Unable to send stop_discovery cmd");
> +		btp_send_error(btp, BTP_GAP_SERVICE, index, 
BTP_ERROR_FAIL);
> +		return;
> +	}
> +
> +	/* Clear flag that mgmt interface is used for scanning */
> +	mgmt_flags &= ~MGMT_OPS_DISCOVERY;
> +
> +	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
> +		 index, 0, NULL);
> +}
> +
>  static void btp_gap_stop_discovery(uint8_t index, const void *param,
>  					uint16_t length, void 
*user_data)
>  {
> @@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index,
> const void *param, return;
>  	}
> 
> -	l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
> -					stop_discovery_reply, NULL, 
NULL);
> +	/* If the discovery procedure is started by BT MGMT API for limited
> +	 * discovering, it should be stopped by mgmt API.
> +	 */
> +	if (mgmt_flags & MGMT_OPS_DISCOVERY)
> +		btp_mgmt_stop_discovery(index);
> +	else
> +		l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", 
NULL,
> +					 stop_discovery_reply, NULL, 
NULL);
>  }
> 
>  static void connect_reply(struct l_dbus_proxy *proxy,
> @@ -3140,6 +3270,7 @@ static void usage(void)
>  	l_info("\tbtpclient [options]");
>  	l_info("options:\n"
>  	"\t-s, --socket <socket>  Socket to use for BTP\n"
> +	"\t-i, --index <id>       Specify the adapter index\n"
>  	"\t-q, --quiet            Don't emit any logs\n"
>  	"\t-v, --version          Show version\n"
>  	"\t-h, --help             Show help options");
> @@ -3147,12 +3278,52 @@ static void usage(void)
> 
>  static const struct option options[] = {
>  	{ "socket",	1, 0, 's' },
> +	{ "index",	1, 0, 'i' },
>  	{ "quiet",	0, 0, 'q' },
>  	{ "version",	0, 0, 'v' },
>  	{ "help",	0, 0, 'h' },
>  	{ 0, 0, 0, 0 }
>  };
> 
> +static void set_index(const char *arg)
> +{
> +	/* Use default index 0 */
> +	if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
> +						!strcmp(arg, 
"all"))
> +		mgmt_index = MGMT_INDEX_NONE;
> +	else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
> +		mgmt_index = atoi(&arg[3]);
> +	else
> +		mgmt_index = atoi(arg);
> +}
> +
> +static int btp_mgmt_init(const char *index_opt)
> +{
> +	mgmt = mgmt_new_default();
> +	if (!mgmt) {
> +		l_info("Unable to open mgmt_socket\n");
> +		return EXIT_FAILURE;
> +	}
> +
> +	if (index_opt)
> +		set_index(index_opt);
> +
> +	if (mgmt_index == MGMT_INDEX_NONE)
> +		mgmt_index = 0;
> +
> +	return EXIT_SUCCESS;
> +}
> +
> +static void btp_mgmt_release(void)
> +{
> +	l_error("MGMT: Release all management resources");
> +	mgmt_cancel_all(mgmt);
> +	mgmt_unregister_all(mgmt);
> +	mgmt_unref(mgmt);
> +}
> +
> +static const char *index_opt;
> +
>  int main(int argc, char *argv[])
>  {
>  	struct l_dbus_client *client;
> @@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
> 
>  	l_log_set_stderr();
> 
> -	while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) != 
-1) {
> +	while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
> +								
NULL)) != -1) {
>  		switch (opt) {
>  		case 's':
>  			socket_path = l_strdup(optarg);
> @@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
>  		case 'v':
>  			l_info("%s", VERSION);
>  			return EXIT_SUCCESS;
> +		case 'i':
> +			index_opt = l_strdup(optarg);
> +			break;
>  		case 'h':
>  		default:
>  			usage();
> @@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
>  	if (!l_main_init())
>  		return EXIT_FAILURE;
> 
> +	if (btp_mgmt_init(index_opt)) {
> +		l_error("Unable to initialize the management interface");
> +		return EXIT_FAILURE;
> +	}
> 
>  	adapters = l_queue_new();
> 
> @@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
>  	l_dbus_client_destroy(client);
>  	l_dbus_destroy(dbus);
>  	btp_cleanup(btp);
> +	btp_mgmt_release();
> 
>  	l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free);


-- 
pozdrawiam
Szymon Janc

Re: [PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[Luiz Augusto von Dentz]

Hi Tedd,

On Fri, Jun 5, 2020 at 2:09 AM Szymon Janc <szymon.janc@codecoup.pl> wrote:
>
> Hi Ted,
>
> On Friday, 5 June 2020 08:10:03 CEST Tedd Ho-Jeong An wrote:
> > From: Tedd Ho-Jeong An <tedd.an@intel.com>
> >
> > There are a few test cases for limited discovery in GAP qualification
> > test suite. But the d-bus API doesn't support it and the only way to
> > start the limited discovery is using the management API.
> >
> > This patch adds support for limited discovery by using management API.
>
> Isn't it enough by spec to check if limited discoverable flag is set?
> We provide this info in AdvertisingFlags so we should be conforming.
>
> Also, if we want to be able to explicitly do Limited Discovery this should be
> added to SetDiscoveryFilter so that btpclient can stay D-Bus only.

We should probably use DiscoverableTimeout to indicate a limited
discoverable flag instead of general discoverable, I will send a patch
for that.

> > ---
> >  tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
> >  1 file changed, 187 insertions(+), 7 deletions(-)
> >
> > diff --git a/tools/btpclient.c b/tools/btpclient.c
> > index f9c693056..46f866117 100644
> > --- a/tools/btpclient.c
> > +++ b/tools/btpclient.c
> > @@ -36,6 +36,10 @@
> >  #include "lib/bluetooth.h"
> >  #include "src/shared/btp.h"
> >
> > +/* For BT_MGMT API */
> > +#include "lib/mgmt.h"
> > +#include "src/shared/mgmt.h"
> > +
> >  #define AD_PATH "/org/bluez/advertising"
> >  #define AG_PATH "/org/bluez/agent"
> >  #define AD_IFACE "org.bluez.LEAdvertisement1"
> > @@ -77,6 +81,14 @@ static struct btp *btp;
> >
> >  static bool gap_service_registered;
> >
> > +/* For BT_MGMT API */
> > +static struct mgmt *mgmt;
> > +static uint16_t mgmt_index;
> > +
> > +static uint32_t mgmt_flags;
> > +
> > +#define MGMT_OPS_DISCOVERY   0x01
> > +
> >  struct ad_data {
> >       uint8_t data[25];
> >       uint8_t len;
> > @@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct
> > l_dbus_proxy *proxy, start_discovery_reply, NULL, NULL);
> >  }
> >
> > +#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
> > +#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 << BDADDR_LE_RANDOM))
> > +#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
> > +
> > +struct discovery_flags {
> > +     uint8_t flags;
> > +};
> > +
> > +static int btp_mgmt_start_limited_discovery(uint8_t flags)
> > +{
> > +     struct mgmt_cp_start_discovery cp;
> > +     uint8_t type = SCAN_TYPE_DUAL;
> > +
> > +     memset(&cp, 0, sizeof(cp));
> > +
> > +     if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
> > +                  BTP_GAP_DISCOVERY_FLAG_BREDR)) {
> > +             type = SCAN_TYPE_DUAL;
> > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
> > +             type &= ~SCAN_TYPE_BREDR;
> > +             type |= SCAN_TYPE_LE;
> > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
> > +             type |= SCAN_TYPE_BREDR;
> > +             type &= ~SCAN_TYPE_LE;
> > +     }
> > +     cp.type = type;
> > +
> > +     return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY, mgmt_index,
> > +                      sizeof(cp), &cp, NULL, NULL, NULL);
> > +}
> > +
> > +static void btp_mgmt_discovering_destroy(void *user_data)
> > +{
> > +     l_free(user_data);
> > +}
> > +
> > +static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
> > +                                 const void *param, void
> *user_data)
> > +{
> > +     const struct mgmt_ev_discovering *ev = param;
> > +     struct discovery_flags *df = user_data;
> > +
> > +     if (len < sizeof(*ev)) {
> > +             l_error("Too short (%u bytes) discovering event", len);
> > +             return;
> > +     }
> > +
> > +     l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
> > +
> > +     /* Start new discovery */
> > +     if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
> > +             btp_mgmt_start_limited_discovery(df->flags);
> > +}
> > +
> > +static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t flags)
> > +{
> > +     int ret;
> > +     struct discovery_flags *df;
> > +
> > +     /* Saves the flags so it can be used to start new discovery */
> > +     df = l_new(struct discovery_flags, 1);
> > +     df->flags = flags;
> > +
> > +     /* Register event for discovering */
> > +     mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
> > +                   btp_mgmt_discovering_cb, df,
> > +                   btp_mgmt_discovering_destroy);
> > +
> > +     ret = btp_mgmt_start_limited_discovery(flags);
> > +     if (ret == 0) {
> > +             l_error("Unable to send start_discovery cmd");
> > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> BTP_ERROR_FAIL);
> > +             return;
> > +     }
> > +
> > +     /* Set flag that mgmt interface is used for scanning */
> > +     mgmt_flags |= MGMT_OPS_DISCOVERY;
> > +
> > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
> > +              index, 0, NULL);
> > +}
> > +
> >  static void btp_gap_start_discovery(uint8_t index, const void *param,
> >                                       uint16_t length, void
> *user_data)
> >  {
> > @@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t index,
> > const void *param, return;
> >       }
> >
> > -     l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
> > -
> set_discovery_filter_setup,
> > -
> set_discovery_filter_reply,
> > -                                             L_UINT_TO_PTR(cp-
> >flags), NULL);
> > +     /* Use BT MGMT interface to start limited discovery procedure since
> > +      * it is not supported by D-BUS API
> > +      */
> > +     if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
> > +             btp_mgmt_setup_limited_discovery(index, cp->flags);
> > +     else {
> > +             l_dbus_proxy_method_call(adapter->proxy,
> "SetDiscoveryFilter",
> > +                                      set_discovery_filter_setup,
> > +                                      set_discovery_filter_reply,
> > +                                      L_UINT_TO_PTR(cp->flags),
> NULL);
> > +     }
> >  }
> >
> >  static void clear_discovery_filter_setup(struct l_dbus_message *message,
> > @@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct l_dbus_proxy
> > *proxy, NULL, NULL);
> >  }
> >
> > +static void btp_mgmt_stop_discovery(uint8_t index)
> > +{
> > +     struct mgmt_cp_stop_discovery cp;
> > +     int ret;
> > +
> > +     memset(&cp, 0, sizeof(cp));
> > +     cp.type = SCAN_TYPE_DUAL;
> > +
> > +     ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index,
> sizeof(cp),
> > +                     &cp, NULL, NULL, NULL);
> > +     if (ret == 0) {
> > +             l_error("Unable to send stop_discovery cmd");
> > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> BTP_ERROR_FAIL);
> > +             return;
> > +     }
> > +
> > +     /* Clear flag that mgmt interface is used for scanning */
> > +     mgmt_flags &= ~MGMT_OPS_DISCOVERY;
> > +
> > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
> > +              index, 0, NULL);
> > +}
> > +
> >  static void btp_gap_stop_discovery(uint8_t index, const void *param,
> >                                       uint16_t length, void
> *user_data)
> >  {
> > @@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index,
> > const void *param, return;
> >       }
> >
> > -     l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
> > -                                     stop_discovery_reply, NULL,
> NULL);
> > +     /* If the discovery procedure is started by BT MGMT API for limited
> > +      * discovering, it should be stopped by mgmt API.
> > +      */
> > +     if (mgmt_flags & MGMT_OPS_DISCOVERY)
> > +             btp_mgmt_stop_discovery(index);
> > +     else
> > +             l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery",
> NULL,
> > +                                      stop_discovery_reply, NULL,
> NULL);
> >  }
> >
> >  static void connect_reply(struct l_dbus_proxy *proxy,
> > @@ -3140,6 +3270,7 @@ static void usage(void)
> >       l_info("\tbtpclient [options]");
> >       l_info("options:\n"
> >       "\t-s, --socket <socket>  Socket to use for BTP\n"
> > +     "\t-i, --index <id>       Specify the adapter index\n"
> >       "\t-q, --quiet            Don't emit any logs\n"
> >       "\t-v, --version          Show version\n"
> >       "\t-h, --help             Show help options");
> > @@ -3147,12 +3278,52 @@ static void usage(void)
> >
> >  static const struct option options[] = {
> >       { "socket",     1, 0, 's' },
> > +     { "index",      1, 0, 'i' },
> >       { "quiet",      0, 0, 'q' },
> >       { "version",    0, 0, 'v' },
> >       { "help",       0, 0, 'h' },
> >       { 0, 0, 0, 0 }
> >  };
> >
> > +static void set_index(const char *arg)
> > +{
> > +     /* Use default index 0 */
> > +     if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
> > +                                             !strcmp(arg,
> "all"))
> > +             mgmt_index = MGMT_INDEX_NONE;
> > +     else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
> > +             mgmt_index = atoi(&arg[3]);
> > +     else
> > +             mgmt_index = atoi(arg);
> > +}
> > +
> > +static int btp_mgmt_init(const char *index_opt)
> > +{
> > +     mgmt = mgmt_new_default();
> > +     if (!mgmt) {
> > +             l_info("Unable to open mgmt_socket\n");
> > +             return EXIT_FAILURE;
> > +     }
> > +
> > +     if (index_opt)
> > +             set_index(index_opt);
> > +
> > +     if (mgmt_index == MGMT_INDEX_NONE)
> > +             mgmt_index = 0;
> > +
> > +     return EXIT_SUCCESS;
> > +}
> > +
> > +static void btp_mgmt_release(void)
> > +{
> > +     l_error("MGMT: Release all management resources");
> > +     mgmt_cancel_all(mgmt);
> > +     mgmt_unregister_all(mgmt);
> > +     mgmt_unref(mgmt);
> > +}
> > +
> > +static const char *index_opt;
> > +
> >  int main(int argc, char *argv[])
> >  {
> >       struct l_dbus_client *client;
> > @@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
> >
> >       l_log_set_stderr();
> >
> > -     while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) !=
> -1) {
> > +     while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
> > +
> NULL)) != -1) {
> >               switch (opt) {
> >               case 's':
> >                       socket_path = l_strdup(optarg);
> > @@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
> >               case 'v':
> >                       l_info("%s", VERSION);
> >                       return EXIT_SUCCESS;
> > +             case 'i':
> > +                     index_opt = l_strdup(optarg);
> > +                     break;
> >               case 'h':
> >               default:
> >                       usage();
> > @@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
> >       if (!l_main_init())
> >               return EXIT_FAILURE;
> >
> > +     if (btp_mgmt_init(index_opt)) {
> > +             l_error("Unable to initialize the management interface");
> > +             return EXIT_FAILURE;
> > +     }
> >
> >       adapters = l_queue_new();
> >
> > @@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
> >       l_dbus_client_destroy(client);
> >       l_dbus_destroy(dbus);
> >       btp_cleanup(btp);
> > +     btp_mgmt_release();
> >
> >       l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free);
>
>
> --
> pozdrawiam
> Szymon Janc
>
>


-- 
Luiz Augusto von Dentz

Re: [PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[Luiz Augusto von Dentz]

Hi Tedd,

On Fri, Jun 5, 2020 at 10:22 AM Luiz Augusto von Dentz
<luiz.dentz@gmail.com> wrote:
>
> Hi Tedd,
>
> On Fri, Jun 5, 2020 at 2:09 AM Szymon Janc <szymon.janc@codecoup.pl> wrote:
> >
> > Hi Ted,
> >
> > On Friday, 5 June 2020 08:10:03 CEST Tedd Ho-Jeong An wrote:
> > > From: Tedd Ho-Jeong An <tedd.an@intel.com>
> > >
> > > There are a few test cases for limited discovery in GAP qualification
> > > test suite. But the d-bus API doesn't support it and the only way to
> > > start the limited discovery is using the management API.
> > >
> > > This patch adds support for limited discovery by using management API.
> >
> > Isn't it enough by spec to check if limited discoverable flag is set?
> > We provide this info in AdvertisingFlags so we should be conforming.
> >
> > Also, if we want to be able to explicitly do Limited Discovery this should be
> > added to SetDiscoveryFilter so that btpclient can stay D-Bus only.
>
> We should probably use DiscoverableTimeout to indicate a limited
> discoverable flag instead of general discoverable, I will send a patch
> for that.

In fact it is already supported:

https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/src/advertising.c#n1067

Though there is a small bug related to it that it doesn't set NO_BREDR
in case the adapter global discoverable is not set, but Ive send a fix
for that.

> > > ---
> > >  tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
> > >  1 file changed, 187 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/tools/btpclient.c b/tools/btpclient.c
> > > index f9c693056..46f866117 100644
> > > --- a/tools/btpclient.c
> > > +++ b/tools/btpclient.c
> > > @@ -36,6 +36,10 @@
> > >  #include "lib/bluetooth.h"
> > >  #include "src/shared/btp.h"
> > >
> > > +/* For BT_MGMT API */
> > > +#include "lib/mgmt.h"
> > > +#include "src/shared/mgmt.h"
> > > +
> > >  #define AD_PATH "/org/bluez/advertising"
> > >  #define AG_PATH "/org/bluez/agent"
> > >  #define AD_IFACE "org.bluez.LEAdvertisement1"
> > > @@ -77,6 +81,14 @@ static struct btp *btp;
> > >
> > >  static bool gap_service_registered;
> > >
> > > +/* For BT_MGMT API */
> > > +static struct mgmt *mgmt;
> > > +static uint16_t mgmt_index;
> > > +
> > > +static uint32_t mgmt_flags;
> > > +
> > > +#define MGMT_OPS_DISCOVERY   0x01
> > > +
> > >  struct ad_data {
> > >       uint8_t data[25];
> > >       uint8_t len;
> > > @@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct
> > > l_dbus_proxy *proxy, start_discovery_reply, NULL, NULL);
> > >  }
> > >
> > > +#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
> > > +#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 << BDADDR_LE_RANDOM))
> > > +#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
> > > +
> > > +struct discovery_flags {
> > > +     uint8_t flags;
> > > +};
> > > +
> > > +static int btp_mgmt_start_limited_discovery(uint8_t flags)
> > > +{
> > > +     struct mgmt_cp_start_discovery cp;
> > > +     uint8_t type = SCAN_TYPE_DUAL;
> > > +
> > > +     memset(&cp, 0, sizeof(cp));
> > > +
> > > +     if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
> > > +                  BTP_GAP_DISCOVERY_FLAG_BREDR)) {
> > > +             type = SCAN_TYPE_DUAL;
> > > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
> > > +             type &= ~SCAN_TYPE_BREDR;
> > > +             type |= SCAN_TYPE_LE;
> > > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
> > > +             type |= SCAN_TYPE_BREDR;
> > > +             type &= ~SCAN_TYPE_LE;
> > > +     }
> > > +     cp.type = type;
> > > +
> > > +     return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY, mgmt_index,
> > > +                      sizeof(cp), &cp, NULL, NULL, NULL);
> > > +}
> > > +
> > > +static void btp_mgmt_discovering_destroy(void *user_data)
> > > +{
> > > +     l_free(user_data);
> > > +}
> > > +
> > > +static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
> > > +                                 const void *param, void
> > *user_data)
> > > +{
> > > +     const struct mgmt_ev_discovering *ev = param;
> > > +     struct discovery_flags *df = user_data;
> > > +
> > > +     if (len < sizeof(*ev)) {
> > > +             l_error("Too short (%u bytes) discovering event", len);
> > > +             return;
> > > +     }
> > > +
> > > +     l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
> > > +
> > > +     /* Start new discovery */
> > > +     if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
> > > +             btp_mgmt_start_limited_discovery(df->flags);
> > > +}
> > > +
> > > +static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t flags)
> > > +{
> > > +     int ret;
> > > +     struct discovery_flags *df;
> > > +
> > > +     /* Saves the flags so it can be used to start new discovery */
> > > +     df = l_new(struct discovery_flags, 1);
> > > +     df->flags = flags;
> > > +
> > > +     /* Register event for discovering */
> > > +     mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
> > > +                   btp_mgmt_discovering_cb, df,
> > > +                   btp_mgmt_discovering_destroy);
> > > +
> > > +     ret = btp_mgmt_start_limited_discovery(flags);
> > > +     if (ret == 0) {
> > > +             l_error("Unable to send start_discovery cmd");
> > > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> > BTP_ERROR_FAIL);
> > > +             return;
> > > +     }
> > > +
> > > +     /* Set flag that mgmt interface is used for scanning */
> > > +     mgmt_flags |= MGMT_OPS_DISCOVERY;
> > > +
> > > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
> > > +              index, 0, NULL);
> > > +}
> > > +
> > >  static void btp_gap_start_discovery(uint8_t index, const void *param,
> > >                                       uint16_t length, void
> > *user_data)
> > >  {
> > > @@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t index,
> > > const void *param, return;
> > >       }
> > >
> > > -     l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
> > > -
> > set_discovery_filter_setup,
> > > -
> > set_discovery_filter_reply,
> > > -                                             L_UINT_TO_PTR(cp-
> > >flags), NULL);
> > > +     /* Use BT MGMT interface to start limited discovery procedure since
> > > +      * it is not supported by D-BUS API
> > > +      */
> > > +     if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
> > > +             btp_mgmt_setup_limited_discovery(index, cp->flags);
> > > +     else {
> > > +             l_dbus_proxy_method_call(adapter->proxy,
> > "SetDiscoveryFilter",
> > > +                                      set_discovery_filter_setup,
> > > +                                      set_discovery_filter_reply,
> > > +                                      L_UINT_TO_PTR(cp->flags),
> > NULL);
> > > +     }
> > >  }
> > >
> > >  static void clear_discovery_filter_setup(struct l_dbus_message *message,
> > > @@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct l_dbus_proxy
> > > *proxy, NULL, NULL);
> > >  }
> > >
> > > +static void btp_mgmt_stop_discovery(uint8_t index)
> > > +{
> > > +     struct mgmt_cp_stop_discovery cp;
> > > +     int ret;
> > > +
> > > +     memset(&cp, 0, sizeof(cp));
> > > +     cp.type = SCAN_TYPE_DUAL;
> > > +
> > > +     ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index,
> > sizeof(cp),
> > > +                     &cp, NULL, NULL, NULL);
> > > +     if (ret == 0) {
> > > +             l_error("Unable to send stop_discovery cmd");
> > > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> > BTP_ERROR_FAIL);
> > > +             return;
> > > +     }
> > > +
> > > +     /* Clear flag that mgmt interface is used for scanning */
> > > +     mgmt_flags &= ~MGMT_OPS_DISCOVERY;
> > > +
> > > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
> > > +              index, 0, NULL);
> > > +}
> > > +
> > >  static void btp_gap_stop_discovery(uint8_t index, const void *param,
> > >                                       uint16_t length, void
> > *user_data)
> > >  {
> > > @@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index,
> > > const void *param, return;
> > >       }
> > >
> > > -     l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
> > > -                                     stop_discovery_reply, NULL,
> > NULL);
> > > +     /* If the discovery procedure is started by BT MGMT API for limited
> > > +      * discovering, it should be stopped by mgmt API.
> > > +      */
> > > +     if (mgmt_flags & MGMT_OPS_DISCOVERY)
> > > +             btp_mgmt_stop_discovery(index);
> > > +     else
> > > +             l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery",
> > NULL,
> > > +                                      stop_discovery_reply, NULL,
> > NULL);
> > >  }
> > >
> > >  static void connect_reply(struct l_dbus_proxy *proxy,
> > > @@ -3140,6 +3270,7 @@ static void usage(void)
> > >       l_info("\tbtpclient [options]");
> > >       l_info("options:\n"
> > >       "\t-s, --socket <socket>  Socket to use for BTP\n"
> > > +     "\t-i, --index <id>       Specify the adapter index\n"
> > >       "\t-q, --quiet            Don't emit any logs\n"
> > >       "\t-v, --version          Show version\n"
> > >       "\t-h, --help             Show help options");
> > > @@ -3147,12 +3278,52 @@ static void usage(void)
> > >
> > >  static const struct option options[] = {
> > >       { "socket",     1, 0, 's' },
> > > +     { "index",      1, 0, 'i' },
> > >       { "quiet",      0, 0, 'q' },
> > >       { "version",    0, 0, 'v' },
> > >       { "help",       0, 0, 'h' },
> > >       { 0, 0, 0, 0 }
> > >  };
> > >
> > > +static void set_index(const char *arg)
> > > +{
> > > +     /* Use default index 0 */
> > > +     if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
> > > +                                             !strcmp(arg,
> > "all"))
> > > +             mgmt_index = MGMT_INDEX_NONE;
> > > +     else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
> > > +             mgmt_index = atoi(&arg[3]);
> > > +     else
> > > +             mgmt_index = atoi(arg);
> > > +}
> > > +
> > > +static int btp_mgmt_init(const char *index_opt)
> > > +{
> > > +     mgmt = mgmt_new_default();
> > > +     if (!mgmt) {
> > > +             l_info("Unable to open mgmt_socket\n");
> > > +             return EXIT_FAILURE;
> > > +     }
> > > +
> > > +     if (index_opt)
> > > +             set_index(index_opt);
> > > +
> > > +     if (mgmt_index == MGMT_INDEX_NONE)
> > > +             mgmt_index = 0;
> > > +
> > > +     return EXIT_SUCCESS;
> > > +}
> > > +
> > > +static void btp_mgmt_release(void)
> > > +{
> > > +     l_error("MGMT: Release all management resources");
> > > +     mgmt_cancel_all(mgmt);
> > > +     mgmt_unregister_all(mgmt);
> > > +     mgmt_unref(mgmt);
> > > +}
> > > +
> > > +static const char *index_opt;
> > > +
> > >  int main(int argc, char *argv[])
> > >  {
> > >       struct l_dbus_client *client;
> > > @@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
> > >
> > >       l_log_set_stderr();
> > >
> > > -     while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) !=
> > -1) {
> > > +     while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
> > > +
> > NULL)) != -1) {
> > >               switch (opt) {
> > >               case 's':
> > >                       socket_path = l_strdup(optarg);
> > > @@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
> > >               case 'v':
> > >                       l_info("%s", VERSION);
> > >                       return EXIT_SUCCESS;
> > > +             case 'i':
> > > +                     index_opt = l_strdup(optarg);
> > > +                     break;
> > >               case 'h':
> > >               default:
> > >                       usage();
> > > @@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
> > >       if (!l_main_init())
> > >               return EXIT_FAILURE;
> > >
> > > +     if (btp_mgmt_init(index_opt)) {
> > > +             l_error("Unable to initialize the management interface");
> > > +             return EXIT_FAILURE;
> > > +     }
> > >
> > >       adapters = l_queue_new();
> > >
> > > @@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
> > >       l_dbus_client_destroy(client);
> > >       l_dbus_destroy(dbus);
> > >       btp_cleanup(btp);
> > > +     btp_mgmt_release();
> > >
> > >       l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free);
> >
> >
> > --
> > pozdrawiam
> > Szymon Janc
> >
> >
>
>
> --
> Luiz Augusto von Dentz



-- 
Luiz Augusto von Dentz

Re: [PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[Szymon Janc]

Hi Luiz,

On Friday, 5 June 2020 19:22:56 CEST Luiz Augusto von Dentz wrote:
> Hi Tedd,
> 
> On Fri, Jun 5, 2020 at 2:09 AM Szymon Janc <szymon.janc@codecoup.pl> wrote:
> > Hi Ted,
> > 
> > On Friday, 5 June 2020 08:10:03 CEST Tedd Ho-Jeong An wrote:
> > > From: Tedd Ho-Jeong An <tedd.an@intel.com>
> > > 
> > > There are a few test cases for limited discovery in GAP qualification
> > > test suite. But the d-bus API doesn't support it and the only way to
> > > start the limited discovery is using the management API.
> > > 
> > > This patch adds support for limited discovery by using management API.
> > 
> > Isn't it enough by spec to check if limited discoverable flag is set?
> > We provide this info in AdvertisingFlags so we should be conforming.
> > 
> > Also, if we want to be able to explicitly do Limited Discovery this should
> > be added to SetDiscoveryFilter so that btpclient can stay D-Bus only.
> We should probably use DiscoverableTimeout to indicate a limited
> discoverable flag instead of general discoverable, I will send a patch
> for that.

This is about doing limited discovery as scanner, not advertising as limited 
discoverable :-)

> 
> > > ---
> > > 
> > >  tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
> > >  1 file changed, 187 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/tools/btpclient.c b/tools/btpclient.c
> > > index f9c693056..46f866117 100644
> > > --- a/tools/btpclient.c
> > > +++ b/tools/btpclient.c
> > > @@ -36,6 +36,10 @@
> > > 
> > >  #include "lib/bluetooth.h"
> > >  #include "src/shared/btp.h"
> > > 
> > > +/* For BT_MGMT API */
> > > +#include "lib/mgmt.h"
> > > +#include "src/shared/mgmt.h"
> > > +
> > > 
> > >  #define AD_PATH "/org/bluez/advertising"
> > >  #define AG_PATH "/org/bluez/agent"
> > >  #define AD_IFACE "org.bluez.LEAdvertisement1"
> > > 
> > > @@ -77,6 +81,14 @@ static struct btp *btp;
> > > 
> > >  static bool gap_service_registered;
> > > 
> > > +/* For BT_MGMT API */
> > > +static struct mgmt *mgmt;
> > > +static uint16_t mgmt_index;
> > > +
> > > +static uint32_t mgmt_flags;
> > > +
> > > +#define MGMT_OPS_DISCOVERY   0x01
> > > +
> > > 
> > >  struct ad_data {
> > >  
> > >       uint8_t data[25];
> > >       uint8_t len;
> > > 
> > > @@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct
> > > l_dbus_proxy *proxy, start_discovery_reply, NULL, NULL);
> > > 
> > >  }
> > > 
> > > +#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
> > > +#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 <<
> > > BDADDR_LE_RANDOM))
> > > +#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
> > > +
> > > +struct discovery_flags {
> > > +     uint8_t flags;
> > > +};
> > > +
> > > +static int btp_mgmt_start_limited_discovery(uint8_t flags)
> > > +{
> > > +     struct mgmt_cp_start_discovery cp;
> > > +     uint8_t type = SCAN_TYPE_DUAL;
> > > +
> > > +     memset(&cp, 0, sizeof(cp));
> > > +
> > > +     if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
> > > +                  BTP_GAP_DISCOVERY_FLAG_BREDR)) {
> > > +             type = SCAN_TYPE_DUAL;
> > > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
> > > +             type &= ~SCAN_TYPE_BREDR;
> > > +             type |= SCAN_TYPE_LE;
> > > +     } else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
> > > +             type |= SCAN_TYPE_BREDR;
> > > +             type &= ~SCAN_TYPE_LE;
> > > +     }
> > > +     cp.type = type;
> > > +
> > > +     return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY,
> > > mgmt_index,
> > > +                      sizeof(cp), &cp, NULL, NULL, NULL);
> > > +}
> > > +
> > > +static void btp_mgmt_discovering_destroy(void *user_data)
> > > +{
> > > +     l_free(user_data);
> > > +}
> > > +
> > > +static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
> > > +                                 const void *param, void
> > 
> > *user_data)
> > 
> > > +{
> > > +     const struct mgmt_ev_discovering *ev = param;
> > > +     struct discovery_flags *df = user_data;
> > > +
> > > +     if (len < sizeof(*ev)) {
> > > +             l_error("Too short (%u bytes) discovering event", len);
> > > +             return;
> > > +     }
> > > +
> > > +     l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
> > > +
> > > +     /* Start new discovery */
> > > +     if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
> > > +             btp_mgmt_start_limited_discovery(df->flags);
> > > +}
> > > +
> > > +static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t
> > > flags)
> > > +{
> > > +     int ret;
> > > +     struct discovery_flags *df;
> > > +
> > > +     /* Saves the flags so it can be used to start new discovery */
> > > +     df = l_new(struct discovery_flags, 1);
> > > +     df->flags = flags;
> > > +
> > > +     /* Register event for discovering */
> > > +     mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
> > > +                   btp_mgmt_discovering_cb, df,
> > > +                   btp_mgmt_discovering_destroy);
> > > +
> > > +     ret = btp_mgmt_start_limited_discovery(flags);
> > > +     if (ret == 0) {
> > > +             l_error("Unable to send start_discovery cmd");
> > > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> > 
> > BTP_ERROR_FAIL);
> > 
> > > +             return;
> > > +     }
> > > +
> > > +     /* Set flag that mgmt interface is used for scanning */
> > > +     mgmt_flags |= MGMT_OPS_DISCOVERY;
> > > +
> > > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
> > > +              index, 0, NULL);
> > > +}
> > > +
> > > 
> > >  static void btp_gap_start_discovery(uint8_t index, const void *param,
> > >  
> > >                                       uint16_t length, void
> > 
> > *user_data)
> > 
> > >  {
> > > 
> > > @@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t
> > > index,
> > > const void *param, return;
> > > 
> > >       }
> > > 
> > > -     l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
> > > -
> > 
> > set_discovery_filter_setup,
> > 
> > > -
> > 
> > set_discovery_filter_reply,
> > 
> > > -                                             L_UINT_TO_PTR(cp-
> > >
> > >flags), NULL);
> > >
> > > +     /* Use BT MGMT interface to start limited discovery procedure
> > > since
> > > +      * it is not supported by D-BUS API
> > > +      */
> > > +     if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
> > > +             btp_mgmt_setup_limited_discovery(index, cp->flags);
> > > +     else {
> > > +             l_dbus_proxy_method_call(adapter->proxy,
> > 
> > "SetDiscoveryFilter",
> > 
> > > +                                      set_discovery_filter_setup,
> > > +                                      set_discovery_filter_reply,
> > > +                                      L_UINT_TO_PTR(cp->flags),
> > 
> > NULL);
> > 
> > > +     }
> > > 
> > >  }
> > >  
> > >  static void clear_discovery_filter_setup(struct l_dbus_message
> > >  *message,
> > > 
> > > @@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct
> > > l_dbus_proxy
> > > *proxy, NULL, NULL);
> > > 
> > >  }
> > > 
> > > +static void btp_mgmt_stop_discovery(uint8_t index)
> > > +{
> > > +     struct mgmt_cp_stop_discovery cp;
> > > +     int ret;
> > > +
> > > +     memset(&cp, 0, sizeof(cp));
> > > +     cp.type = SCAN_TYPE_DUAL;
> > > +
> > > +     ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index,
> > 
> > sizeof(cp),
> > 
> > > +                     &cp, NULL, NULL, NULL);
> > > +     if (ret == 0) {
> > > +             l_error("Unable to send stop_discovery cmd");
> > > +             btp_send_error(btp, BTP_GAP_SERVICE, index,
> > 
> > BTP_ERROR_FAIL);
> > 
> > > +             return;
> > > +     }
> > > +
> > > +     /* Clear flag that mgmt interface is used for scanning */
> > > +     mgmt_flags &= ~MGMT_OPS_DISCOVERY;
> > > +
> > > +     btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
> > > +              index, 0, NULL);
> > > +}
> > > +
> > > 
> > >  static void btp_gap_stop_discovery(uint8_t index, const void *param,
> > >  
> > >                                       uint16_t length, void
> > 
> > *user_data)
> > 
> > >  {
> > > 
> > > @@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index,
> > > const void *param, return;
> > > 
> > >       }
> > > 
> > > -     l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
> > > -                                     stop_discovery_reply, NULL,
> > 
> > NULL);
> > 
> > > +     /* If the discovery procedure is started by BT MGMT API for
> > > limited
> > > +      * discovering, it should be stopped by mgmt API.
> > > +      */
> > > +     if (mgmt_flags & MGMT_OPS_DISCOVERY)
> > > +             btp_mgmt_stop_discovery(index);
> > > +     else
> > > +             l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery",
> > 
> > NULL,
> > 
> > > +                                      stop_discovery_reply, NULL,
> > 
> > NULL);
> > 
> > >  }
> > >  
> > >  static void connect_reply(struct l_dbus_proxy *proxy,
> > > 
> > > @@ -3140,6 +3270,7 @@ static void usage(void)
> > > 
> > >       l_info("\tbtpclient [options]");
> > >       l_info("options:\n"
> > >       "\t-s, --socket <socket>  Socket to use for BTP\n"
> > > 
> > > +     "\t-i, --index <id>       Specify the adapter index\n"
> > > 
> > >       "\t-q, --quiet            Don't emit any logs\n"
> > >       "\t-v, --version          Show version\n"
> > >       "\t-h, --help             Show help options");
> > > 
> > > @@ -3147,12 +3278,52 @@ static void usage(void)
> > > 
> > >  static const struct option options[] = {
> > >  
> > >       { "socket",     1, 0, 's' },
> > > 
> > > +     { "index",      1, 0, 'i' },
> > > 
> > >       { "quiet",      0, 0, 'q' },
> > >       { "version",    0, 0, 'v' },
> > >       { "help",       0, 0, 'h' },
> > >       { 0, 0, 0, 0 }
> > >  
> > >  };
> > > 
> > > +static void set_index(const char *arg)
> > > +{
> > > +     /* Use default index 0 */
> > > +     if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
> > > +                                             !strcmp(arg,
> > 
> > "all"))
> > 
> > > +             mgmt_index = MGMT_INDEX_NONE;
> > > +     else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
> > > +             mgmt_index = atoi(&arg[3]);
> > > +     else
> > > +             mgmt_index = atoi(arg);
> > > +}
> > > +
> > > +static int btp_mgmt_init(const char *index_opt)
> > > +{
> > > +     mgmt = mgmt_new_default();
> > > +     if (!mgmt) {
> > > +             l_info("Unable to open mgmt_socket\n");
> > > +             return EXIT_FAILURE;
> > > +     }
> > > +
> > > +     if (index_opt)
> > > +             set_index(index_opt);
> > > +
> > > +     if (mgmt_index == MGMT_INDEX_NONE)
> > > +             mgmt_index = 0;
> > > +
> > > +     return EXIT_SUCCESS;
> > > +}
> > > +
> > > +static void btp_mgmt_release(void)
> > > +{
> > > +     l_error("MGMT: Release all management resources");
> > > +     mgmt_cancel_all(mgmt);
> > > +     mgmt_unregister_all(mgmt);
> > > +     mgmt_unref(mgmt);
> > > +}
> > > +
> > > +static const char *index_opt;
> > > +
> > > 
> > >  int main(int argc, char *argv[])
> > >  {
> > >  
> > >       struct l_dbus_client *client;
> > > 
> > > @@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
> > > 
> > >       l_log_set_stderr();
> > > 
> > > -     while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) !=
> > 
> > -1) {
> > 
> > > +     while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
> > > +
> > 
> > NULL)) != -1) {
> > 
> > >               switch (opt) {
> > >               
> > >               case 's':
> > >                       socket_path = l_strdup(optarg);
> > > 
> > > @@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
> > > 
> > >               case 'v':
> > >                       l_info("%s", VERSION);
> > >                       return EXIT_SUCCESS;
> > > 
> > > +             case 'i':
> > > +                     index_opt = l_strdup(optarg);
> > > +                     break;
> > > 
> > >               case 'h':
> > >               
> > >               default:
> > >                       usage();
> > > 
> > > @@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
> > > 
> > >       if (!l_main_init())
> > >       
> > >               return EXIT_FAILURE;
> > > 
> > > +     if (btp_mgmt_init(index_opt)) {
> > > +             l_error("Unable to initialize the management interface");
> > > +             return EXIT_FAILURE;
> > > +     }
> > > 
> > >       adapters = l_queue_new();
> > > 
> > > @@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
> > > 
> > >       l_dbus_client_destroy(client);
> > >       l_dbus_destroy(dbus);
> > >       btp_cleanup(btp);
> > > 
> > > +     btp_mgmt_release();
> > > 
> > >       l_queue_destroy(adapters,
> > >       (l_queue_destroy_func_t)btp_adapter_free);
> > 
> > --
> > pozdrawiam
> > Szymon Janc


-- 
pozdrawiam
Szymon Janc

Re: [PATCH V2 2/2] tools/btpclient: Use mgmt api for limited discovery

[An, Tedd]

Hi Szymon,

On 6/5/20, 2:04 AM, "Szymon Janc" <szymon.janc@codecoup.pl> wrote:

    Hi Ted,

    On Friday, 5 June 2020 08:10:03 CEST Tedd Ho-Jeong An wrote:
    > From: Tedd Ho-Jeong An <tedd.an@intel.com>
    > 
    > There are a few test cases for limited discovery in GAP qualification
    > test suite. But the d-bus API doesn't support it and the only way to
    > start the limited discovery is using the management API.
    > 
    > This patch adds support for limited discovery by using management API.

    Isn't it enough by spec to check if limited discoverable flag is set?
    We provide this info in AdvertisingFlags so we should be conforming.

GAS.TS describes that IUT doesn't find a device in the General Discoverable
Mode while performing the Limited Discovery. (GAP/DISC/LIMP/BV-02-C)

    Also, if we want to be able to explicitly do Limited Discovery this should be 
    added to SetDiscoveryFilter so that btpclient can stay D-Bus only.

I will take a look into it. Thanks for the pointing it out. I wasn't sure the scope of
btpclient.


    > ---
    >  tools/btpclient.c | 194 ++++++++++++++++++++++++++++++++++++++++++++--
    >  1 file changed, 187 insertions(+), 7 deletions(-)
    > 
    > diff --git a/tools/btpclient.c b/tools/btpclient.c
    > index f9c693056..46f866117 100644
    > --- a/tools/btpclient.c
    > +++ b/tools/btpclient.c
    > @@ -36,6 +36,10 @@
    >  #include "lib/bluetooth.h"
    >  #include "src/shared/btp.h"
    > 
    > +/* For BT_MGMT API */
    > +#include "lib/mgmt.h"
    > +#include "src/shared/mgmt.h"
    > +
    >  #define AD_PATH "/org/bluez/advertising"
    >  #define AG_PATH "/org/bluez/agent"
    >  #define AD_IFACE "org.bluez.LEAdvertisement1"
    > @@ -77,6 +81,14 @@ static struct btp *btp;
    > 
    >  static bool gap_service_registered;
    > 
    > +/* For BT_MGMT API */
    > +static struct mgmt *mgmt;
    > +static uint16_t mgmt_index;
    > +
    > +static uint32_t mgmt_flags;
    > +
    > +#define MGMT_OPS_DISCOVERY	0x01
    > +
    >  struct ad_data {
    >  	uint8_t data[25];
    >  	uint8_t len;
    > @@ -1403,6 +1415,88 @@ static void set_discovery_filter_reply(struct
    > l_dbus_proxy *proxy, start_discovery_reply, NULL, NULL);
    >  }
    > 
    > +#define SCAN_TYPE_BREDR (1 << BDADDR_BREDR)
    > +#define SCAN_TYPE_LE ((1 << BDADDR_LE_PUBLIC) | (1 << BDADDR_LE_RANDOM))
    > +#define SCAN_TYPE_DUAL (SCAN_TYPE_BREDR | SCAN_TYPE_LE)
    > +
    > +struct discovery_flags {
    > +	uint8_t flags;
    > +};
    > +
    > +static int btp_mgmt_start_limited_discovery(uint8_t flags)
    > +{
    > +	struct mgmt_cp_start_discovery cp;
    > +	uint8_t type = SCAN_TYPE_DUAL;
    > +
    > +	memset(&cp, 0, sizeof(cp));
    > +
    > +	if (flags & (BTP_GAP_DISCOVERY_FLAG_LE |
    > +		     BTP_GAP_DISCOVERY_FLAG_BREDR)) {
    > +		type = SCAN_TYPE_DUAL;
    > +	} else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) {
    > +		type &= ~SCAN_TYPE_BREDR;
    > +		type |= SCAN_TYPE_LE;
    > +	} else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) {
    > +		type |= SCAN_TYPE_BREDR;
    > +		type &= ~SCAN_TYPE_LE;
    > +	}
    > +	cp.type = type;
    > +
    > +	return mgmt_send(mgmt, MGMT_OP_START_LIMITED_DISCOVERY, mgmt_index,
    > +			 sizeof(cp), &cp, NULL, NULL, NULL);
    > +}
    > +
    > +static void btp_mgmt_discovering_destroy(void *user_data)
    > +{
    > +	l_free(user_data);
    > +}
    > +
    > +static void btp_mgmt_discovering_cb(uint16_t index, uint16_t len,
    > +				    const void *param, void 
    *user_data)
    > +{
    > +	const struct mgmt_ev_discovering *ev = param;
    > +	struct discovery_flags *df = user_data;
    > +
    > +	if (len < sizeof(*ev)) {
    > +		l_error("Too short (%u bytes) discovering event", len);
    > +		return;
    > +	}
    > +
    > +	l_info("MGMT: discovering %s", ev->discovering ? "on" : "off");
    > +
    > +	/* Start new discovery */
    > +	if (ev->discovering == 0 && (mgmt_flags & MGMT_OPS_DISCOVERY))
    > +		btp_mgmt_start_limited_discovery(df->flags);
    > +}
    > +
    > +static void btp_mgmt_setup_limited_discovery(uint8_t index, uint8_t flags)
    > +{
    > +	int ret;
    > +	struct discovery_flags *df;
    > +
    > +	/* Saves the flags so it can be used to start new discovery */
    > +	df = l_new(struct discovery_flags, 1);
    > +	df->flags = flags;
    > +
    > +	/* Register event for discovering */
    > +	mgmt_register(mgmt, MGMT_EV_DISCOVERING, mgmt_index,
    > +		      btp_mgmt_discovering_cb, df,
    > +		      btp_mgmt_discovering_destroy);
    > +
    > +	ret = btp_mgmt_start_limited_discovery(flags);
    > +	if (ret == 0) {
    > +		l_error("Unable to send start_discovery cmd");
    > +		btp_send_error(btp, BTP_GAP_SERVICE, index, 
    BTP_ERROR_FAIL);
    > +		return;
    > +	}
    > +
    > +	/* Set flag that mgmt interface is used for scanning */
    > +	mgmt_flags |= MGMT_OPS_DISCOVERY;
    > +
    > +	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY,
    > +		 index, 0, NULL);
    > +}
    > +
    >  static void btp_gap_start_discovery(uint8_t index, const void *param,
    >  					uint16_t length, void 
    *user_data)
    >  {
    > @@ -1423,10 +1517,17 @@ static void btp_gap_start_discovery(uint8_t index,
    > const void *param, return;
    >  	}
    > 
    > -	l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter",
    > -						
    set_discovery_filter_setup,
    > -						
    set_discovery_filter_reply,
    > -						L_UINT_TO_PTR(cp-
    >flags), NULL);
    > +	/* Use BT MGMT interface to start limited discovery procedure since
    > +	 * it is not supported by D-BUS API
    > +	 */
    > +	if (cp->flags & BTP_GAP_DISCOVERY_FLAG_LIMITED)
    > +		btp_mgmt_setup_limited_discovery(index, cp->flags);
    > +	else {
    > +		l_dbus_proxy_method_call(adapter->proxy, 
    "SetDiscoveryFilter",
    > +					 set_discovery_filter_setup,
    > +					 set_discovery_filter_reply,
    > +					 L_UINT_TO_PTR(cp->flags), 
    NULL);
    > +	}
    >  }
    > 
    >  static void clear_discovery_filter_setup(struct l_dbus_message *message,
    > @@ -1501,6 +1602,29 @@ static void stop_discovery_reply(struct l_dbus_proxy
    > *proxy, NULL, NULL);
    >  }
    > 
    > +static void btp_mgmt_stop_discovery(uint8_t index)
    > +{
    > +	struct mgmt_cp_stop_discovery cp;
    > +	int ret;
    > +
    > +	memset(&cp, 0, sizeof(cp));
    > +	cp.type = SCAN_TYPE_DUAL;
    > +
    > +	ret = mgmt_send(mgmt, MGMT_OP_STOP_DISCOVERY, mgmt_index, 
    sizeof(cp),
    > +			&cp, NULL, NULL, NULL);
    > +	if (ret == 0) {
    > +		l_error("Unable to send stop_discovery cmd");
    > +		btp_send_error(btp, BTP_GAP_SERVICE, index, 
    BTP_ERROR_FAIL);
    > +		return;
    > +	}
    > +
    > +	/* Clear flag that mgmt interface is used for scanning */
    > +	mgmt_flags &= ~MGMT_OPS_DISCOVERY;
    > +
    > +	btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY,
    > +		 index, 0, NULL);
    > +}
    > +
    >  static void btp_gap_stop_discovery(uint8_t index, const void *param,
    >  					uint16_t length, void 
    *user_data)
    >  {
    > @@ -1520,8 +1644,14 @@ static void btp_gap_stop_discovery(uint8_t index,
    > const void *param, return;
    >  	}
    > 
    > -	l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL,
    > -					stop_discovery_reply, NULL, 
    NULL);
    > +	/* If the discovery procedure is started by BT MGMT API for limited
    > +	 * discovering, it should be stopped by mgmt API.
    > +	 */
    > +	if (mgmt_flags & MGMT_OPS_DISCOVERY)
    > +		btp_mgmt_stop_discovery(index);
    > +	else
    > +		l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", 
    NULL,
    > +					 stop_discovery_reply, NULL, 
    NULL);
    >  }
    > 
    >  static void connect_reply(struct l_dbus_proxy *proxy,
    > @@ -3140,6 +3270,7 @@ static void usage(void)
    >  	l_info("\tbtpclient [options]");
    >  	l_info("options:\n"
    >  	"\t-s, --socket <socket>  Socket to use for BTP\n"
    > +	"\t-i, --index <id>       Specify the adapter index\n"
    >  	"\t-q, --quiet            Don't emit any logs\n"
    >  	"\t-v, --version          Show version\n"
    >  	"\t-h, --help             Show help options");
    > @@ -3147,12 +3278,52 @@ static void usage(void)
    > 
    >  static const struct option options[] = {
    >  	{ "socket",	1, 0, 's' },
    > +	{ "index",	1, 0, 'i' },
    >  	{ "quiet",	0, 0, 'q' },
    >  	{ "version",	0, 0, 'v' },
    >  	{ "help",	0, 0, 'h' },
    >  	{ 0, 0, 0, 0 }
    >  };
    > 
    > +static void set_index(const char *arg)
    > +{
    > +	/* Use default index 0 */
    > +	if (!arg || !strcmp(arg, "none") || !strcmp(arg, "any") ||
    > +						!strcmp(arg, 
    "all"))
    > +		mgmt_index = MGMT_INDEX_NONE;
    > +	else if (strlen(arg) > 3 && !strncasecmp(arg, "hci", 3))
    > +		mgmt_index = atoi(&arg[3]);
    > +	else
    > +		mgmt_index = atoi(arg);
    > +}
    > +
    > +static int btp_mgmt_init(const char *index_opt)
    > +{
    > +	mgmt = mgmt_new_default();
    > +	if (!mgmt) {
    > +		l_info("Unable to open mgmt_socket\n");
    > +		return EXIT_FAILURE;
    > +	}
    > +
    > +	if (index_opt)
    > +		set_index(index_opt);
    > +
    > +	if (mgmt_index == MGMT_INDEX_NONE)
    > +		mgmt_index = 0;
    > +
    > +	return EXIT_SUCCESS;
    > +}
    > +
    > +static void btp_mgmt_release(void)
    > +{
    > +	l_error("MGMT: Release all management resources");
    > +	mgmt_cancel_all(mgmt);
    > +	mgmt_unregister_all(mgmt);
    > +	mgmt_unref(mgmt);
    > +}
    > +
    > +static const char *index_opt;
    > +
    >  int main(int argc, char *argv[])
    >  {
    >  	struct l_dbus_client *client;
    > @@ -3160,7 +3331,8 @@ int main(int argc, char *argv[])
    > 
    >  	l_log_set_stderr();
    > 
    > -	while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) != 
    -1) {
    > +	while ((opt = getopt_long(argc, argv, "+hs:vqi:", options,
    > +								
    NULL)) != -1) {
    >  		switch (opt) {
    >  		case 's':
    >  			socket_path = l_strdup(optarg);
    > @@ -3173,6 +3345,9 @@ int main(int argc, char *argv[])
    >  		case 'v':
    >  			l_info("%s", VERSION);
    >  			return EXIT_SUCCESS;
    > +		case 'i':
    > +			index_opt = l_strdup(optarg);
    > +			break;
    >  		case 'h':
    >  		default:
    >  			usage();
    > @@ -3189,6 +3364,10 @@ int main(int argc, char *argv[])
    >  	if (!l_main_init())
    >  		return EXIT_FAILURE;
    > 
    > +	if (btp_mgmt_init(index_opt)) {
    > +		l_error("Unable to initialize the management interface");
    > +		return EXIT_FAILURE;
    > +	}
    > 
    >  	adapters = l_queue_new();
    > 
    > @@ -3210,6 +3389,7 @@ int main(int argc, char *argv[])
    >  	l_dbus_client_destroy(client);
    >  	l_dbus_destroy(dbus);
    >  	btp_cleanup(btp);
    > +	btp_mgmt_release();
    > 
    >  	l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free);


    -- 
    pozdrawiam
    Szymon Janc

Regards,
Tedd