* 2.6.19.1, sata_sil: sata dvd writer doesn't work @ 2006-12-16 15:56 Harald Dunkel 2006-12-19 14:34 ` Tejun Heo 2006-12-26 11:27 ` Harald Dunkel 0 siblings, 2 replies; 15+ messages in thread From: Harald Dunkel @ 2006-12-16 15:56 UTC (permalink / raw) To: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 1198 bytes --] Hi folks, I've got a problem with a Samsung SATA dvd writer: It doesn't play video DVDs. If I connect the same drive via an adapter to USB, then there is no such problem. dmesg says: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x1) ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: model number mismatch 'TSSTcorpCD/DVDW SH-S183A' != 'ÑÅÌhõ³Nõ This is reproducible. lspci: 01:07.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) 01:07.0 0104: 1095:3512 (rev 01) /proc/scsi/scsi: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: TSSTcorp Model: CD/DVDW SH-S183A Rev: SB01 Type: CD-ROM ANSI SCSI revision: 05 I already asked Samsung's hotline for a firmware update, but there is none available. They haven't heard of this problem before, either. My wild guess would be that this is a driver problem. Kernels tried: 2.6.19.1, 2.6.18.3 What would be your suggestion to track down this problem? Regards Harri [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-16 15:56 2.6.19.1, sata_sil: sata dvd writer doesn't work Harald Dunkel @ 2006-12-19 14:34 ` Tejun Heo 2006-12-19 18:42 ` Harald Dunkel 2006-12-26 11:27 ` Harald Dunkel 1 sibling, 1 reply; 15+ messages in thread From: Tejun Heo @ 2006-12-19 14:34 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List Harald Dunkel wrote: > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata2.00: (BMDMA stat 0x1) > ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) > ata2: soft resetting port > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > ata2.00: model number mismatch 'TSSTcorpCD/DVDW SH-S183A' != 'ÑÅÌhõ³Nõ This is really fishy. Something really went wrong there. Please post full dmesg and does the drive work at all? - eg. data dvd or cd. How reproducible is the problem? What program did you use to play dvd? If mplayer, please run it with -v and post what it says (usb case too). -- tejun ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-19 14:34 ` Tejun Heo @ 2006-12-19 18:42 ` Harald Dunkel 2006-12-19 23:59 ` Tejun Heo 0 siblings, 1 reply; 15+ messages in thread From: Harald Dunkel @ 2006-12-19 18:42 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1.1: Type: text/plain, Size: 1307 bytes --] Hi Tejun, Tejun Heo wrote: > Harald Dunkel wrote: >> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >> ata2.00: (BMDMA stat 0x1) >> ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) >> ata2: soft resetting port >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> ata2.00: model number mismatch 'TSSTcorpCD/DVDW SH-S183A' != 'ÑÅÌhõ³Nõ > > This is really fishy. Something really went wrong there. Please post > full dmesg and does the drive work at all? - eg. data dvd or cd. I haven't tried writing CDs yet, but the last backup on DVD went fine. And it is really fast: It starts writing DVDs with 8X and goes up to 18X (Verbatim DVD-R 16X). I don't see a DMA problem. > How > reproducible is the problem? Always. I tried 5 different commercial video DVD by now. All showed this problem. The video DVDs I created in a Philips DVD recorder (DVD-R) play fine. BTW, region code has been set to 2 (Europe) using regionset. There was no error message, AFAIR. > What program did you use to play dvd? xine, mplayer. > If > mplayer, please run it with -v and post what it says (usb case too). > See attachments. Hope this helps. Please mail if you need more info, or if there is something to try. Regards Harri [-- Attachment #1.2: log.dmesg.gz --] [-- Type: application/x-tar, Size: 4160 bytes --] [-- Attachment #1.3: log.mplayer.gz --] [-- Type: application/x-tar, Size: 734 bytes --] [-- Attachment #1.4: log.mplayer.usb.gz --] [-- Type: application/x-tar, Size: 7454 bytes --] [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-19 18:42 ` Harald Dunkel @ 2006-12-19 23:59 ` Tejun Heo 2006-12-21 19:52 ` Harald Dunkel 0 siblings, 1 reply; 15+ messages in thread From: Tejun Heo @ 2006-12-19 23:59 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 267 bytes --] * dmesg is truncated, please post the content of file /var/log/boot.msg. * Please post the result of 'lspci -nnvvv' * Please try the attached patch and see if it makes any difference and post the result of 'dmesg' after trying to play a problematic dvd. -- tejun [-- Attachment #2: patch --] [-- Type: text/plain, Size: 2496 bytes --] diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 02b2b27..bbbec75 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1433,16 +1433,47 @@ static void ata_eh_report(struct ata_port *ap) } for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + static const char *dma_str[] = { + [DMA_BIDIRECTIONAL] = "bidi", + [DMA_TO_DEVICE] = "out", + [DMA_FROM_DEVICE] = "in", + [DMA_NONE] = "", + }; struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; + const u8 *c = qc->cdb; + unsigned int nbytes; if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) continue; - ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " - "Emask 0x%x stat 0x%x err 0x%x (%s)\n", - qc->tag, qc->tf.command, qc->err_mask, - qc->result_tf.command, qc->result_tf.feature, - ata_err_string(qc->err_mask)); + nbytes = qc->nbytes; + if (!nbytes) + nbytes = qc->nsect << 9; + + ata_dev_printk(qc->dev, KERN_ERR, + "cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x " + "tag %d cdb 0x%x data %u %s\n " + "res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x " + "Emask 0x%x (%s)\n", + cmd->command, cmd->feature, cmd->nsect, + cmd->lbal, cmd->lbam, cmd->lbah, + cmd->hob_feature, cmd->hob_nsect, + cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah, + cmd->device, qc->tag, qc->cdb[0], nbytes, + dma_str[qc->dma_dir], + res->command, res->feature, res->nsect, + res->lbal, res->lbam, res->lbah, + res->hob_feature, res->hob_nsect, + res->hob_lbal, res->hob_lbam, res->hob_lbah, + res->device, qc->err_mask, ata_err_string(qc->err_mask)); + + ata_dev_printk(qc->dev, KERN_ERR, + "CDB: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " + "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x p=%d\n", + c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7], + c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15], + cmd->protocol); } } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3ac4890..f018e49 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -191,6 +191,7 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, goto out; req->cmd_len = COMMAND_SIZE(cmd[0]); + memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ memcpy(req->cmd, cmd, req->cmd_len); req->sense = sense; req->sense_len = 0; ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-19 23:59 ` Tejun Heo @ 2006-12-21 19:52 ` Harald Dunkel 2006-12-27 5:03 ` Tejun Heo 0 siblings, 1 reply; 15+ messages in thread From: Harald Dunkel @ 2006-12-21 19:52 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1.1: Type: text/plain, Size: 451 bytes --] Hi Tejun, Tejun Heo wrote: > * dmesg is truncated, please post the content of file /var/log/boot.msg. > > * Please post the result of 'lspci -nnvvv' > > * Please try the attached patch and see if it makes any difference and > post the result of 'dmesg' after trying to play a problematic dvd. > It still doesn't work, but the dmesg output looks less weird. See attachments. Hope this helps. Please mail. Regards Harri [-- Attachment #1.2: kern.log.gz --] [-- Type: application/x-tar, Size: 7086 bytes --] [-- Attachment #1.3: lspci.txt.gz --] [-- Type: application/x-tar, Size: 2451 bytes --] [-- Attachment #1.4: kern.log.patched.gz --] [-- Type: application/x-tar, Size: 6430 bytes --] [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-21 19:52 ` Harald Dunkel @ 2006-12-27 5:03 ` Tejun Heo 2006-12-28 4:23 ` Tejun Heo 0 siblings, 1 reply; 15+ messages in thread From: Tejun Heo @ 2006-12-27 5:03 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List Harald Dunkel wrote: > Hi Tejun, > > Tejun Heo wrote: >> * dmesg is truncated, please post the content of file /var/log/boot.msg. >> >> * Please post the result of 'lspci -nnvvv' >> >> * Please try the attached patch and see if it makes any difference and >> post the result of 'dmesg' after trying to play a problematic dvd. >> > > It still doesn't work, but the dmesg output looks less > weird. See attachments. > > > Hope this helps. Please mail. Okay, Hmmm... Weird. I tried to reproduce it here w/ LG dvd ram and sil3114 (almost identical, just two more ports) with no success. I just ordered SH-S183A and it should arrive later today (zero-day shipping just at USD 3.5!). I'll write again when I know more. -- tejun ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-27 5:03 ` Tejun Heo @ 2006-12-28 4:23 ` Tejun Heo 2006-12-28 19:46 ` Harald Dunkel 0 siblings, 1 reply; 15+ messages in thread From: Tejun Heo @ 2006-12-28 4:23 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 988 bytes --] Tejun Heo wrote: > Harald Dunkel wrote: >> Hi Tejun, >> >> Tejun Heo wrote: >>> * dmesg is truncated, please post the content of file /var/log/boot.msg. >>> >>> * Please post the result of 'lspci -nnvvv' >>> >>> * Please try the attached patch and see if it makes any difference and >>> post the result of 'dmesg' after trying to play a problematic dvd. >>> >> It still doesn't work, but the dmesg output looks less >> weird. See attachments. >> >> >> Hope this helps. Please mail. > > Okay, Hmmm... Weird. I tried to reproduce it here w/ LG dvd ram and > sil3114 (almost identical, just two more ports) with no success. I just > ordered SH-S183A and it should arrive later today (zero-day shipping > just at USD 3.5!). > > I'll write again when I know more. > Failed to reproduce here. Please do the following two things. 1. Post the result of "mplayer -v dvd:// > out 2>&1" 2. Apply the attached patch to v2.6.19 and report dmesg after playing dvd. Happy new year. -- tejun [-- Attachment #2: patch --] [-- Type: text/plain, Size: 19447 bytes --] diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 02b2b27..cd92a70 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1139,6 +1139,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, tmp = atapi_eh_request_sense(qc->dev, qc->scsicmd->sense_buffer); if (!tmp) { + const u8 *c = qc->cdb; /* ATA_QCFLAG_SENSE_VALID is used to tell * atapi_qc_complete() that sense data is * already valid. @@ -1146,6 +1147,17 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, * TODO: interpret sense data and set * appropriate err_mask. */ + ata_dev_printk(qc->dev, KERN_ERR, + "CDB: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " + "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x p=%d\n", + c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7], + c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15], + qc->tf.protocol); + ata_dev_printk(qc->dev, KERN_ERR, + "SENSE: k %02x a %02x:%02x\n", + qc->scsicmd->sense_buffer[2], + qc->scsicmd->sense_buffer[12], + qc->scsicmd->sense_buffer[13]); qc->flags |= ATA_QCFLAG_SENSE_VALID; } else qc->err_mask |= tmp; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 47ea111..bb8b860 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -51,7 +51,7 @@ #define SECTOR_SIZE 512 -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc); static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); @@ -951,7 +951,6 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate * * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY * (to start). Perhaps these commands should be preceded by @@ -964,22 +963,25 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - const u8 *scsicmd) +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) { + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_taskfile *tf = &qc->tf; + const u8 *cdb = scmd->cmnd; + + if (scmd->cmd_len < 5) + goto invalid_fld; tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[1] & 0x1) { + if (cdb[1] & 0x1) { ; /* ignore IMMED bit, violates sat-r05 */ } - if (scsicmd[4] & 0x2) + if (cdb[4] & 0x2) goto invalid_fld; /* LOEJ bit set not supported */ - if (((scsicmd[4] >> 4) & 0xf) != 0) + if (((cdb[4] >> 4) & 0xf) != 0) goto invalid_fld; /* power conditions not supported */ - if (scsicmd[4] & 0x1) { + if (cdb[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ if (qc->dev->flags & ATA_DFLAG_LBA) { @@ -1012,7 +1014,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; } @@ -1021,7 +1023,6 @@ invalid_fld: /** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate (ignored) * * Sets up an ATA taskfile to issue FLUSH CACHE or * FLUSH CACHE EXT. @@ -1032,8 +1033,7 @@ invalid_fld: * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &qc->tf; @@ -1051,7 +1051,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scs /** * scsi_6_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 6-byte commands. * @@ -1059,18 +1059,17 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scs * @plba: the LBA * @plen: the transfer length */ - -static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("six-byte command\n"); - lba |= ((u64)scsicmd[2]) << 8; - lba |= ((u64)scsicmd[3]); + lba |= ((u64)cdb[2]) << 8; + lba |= ((u64)cdb[3]); - len |= ((u32)scsicmd[4]); + len |= ((u32)cdb[4]); *plba = lba; *plen = len; @@ -1078,7 +1077,7 @@ static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * scsi_10_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 10-byte commands. * @@ -1086,21 +1085,20 @@ static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * @plba: the LBA * @plen: the transfer length */ - -static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("ten-byte command\n"); - lba |= ((u64)scsicmd[2]) << 24; - lba |= ((u64)scsicmd[3]) << 16; - lba |= ((u64)scsicmd[4]) << 8; - lba |= ((u64)scsicmd[5]); + lba |= ((u64)cdb[2]) << 24; + lba |= ((u64)cdb[3]) << 16; + lba |= ((u64)cdb[4]) << 8; + lba |= ((u64)cdb[5]); - len |= ((u32)scsicmd[7]) << 8; - len |= ((u32)scsicmd[8]); + len |= ((u32)cdb[7]) << 8; + len |= ((u32)cdb[8]); *plba = lba; *plen = len; @@ -1108,7 +1106,7 @@ static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * scsi_16_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 16-byte commands. * @@ -1116,27 +1114,26 @@ static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * @plba: the LBA * @plen: the transfer length */ - -static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("sixteen-byte command\n"); - lba |= ((u64)scsicmd[2]) << 56; - lba |= ((u64)scsicmd[3]) << 48; - lba |= ((u64)scsicmd[4]) << 40; - lba |= ((u64)scsicmd[5]) << 32; - lba |= ((u64)scsicmd[6]) << 24; - lba |= ((u64)scsicmd[7]) << 16; - lba |= ((u64)scsicmd[8]) << 8; - lba |= ((u64)scsicmd[9]); + lba |= ((u64)cdb[2]) << 56; + lba |= ((u64)cdb[3]) << 48; + lba |= ((u64)cdb[4]) << 40; + lba |= ((u64)cdb[5]) << 32; + lba |= ((u64)cdb[6]) << 24; + lba |= ((u64)cdb[7]) << 16; + lba |= ((u64)cdb[8]) << 8; + lba |= ((u64)cdb[9]); - len |= ((u32)scsicmd[10]) << 24; - len |= ((u32)scsicmd[11]) << 16; - len |= ((u32)scsicmd[12]) << 8; - len |= ((u32)scsicmd[13]); + len |= ((u32)cdb[10]) << 24; + len |= ((u32)cdb[11]) << 16; + len |= ((u32)cdb[12]) << 8; + len |= ((u32)cdb[13]); *plba = lba; *plen = len; @@ -1145,7 +1142,6 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate * * Converts SCSI VERIFY command to an ATA READ VERIFY command. * @@ -1155,23 +1151,28 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc) { + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; u64 dev_sectors = qc->dev->n_sectors; + const u8 *cdb = scmd->cmnd; u64 block; u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[0] == VERIFY) - scsi_10_lba_len(scsicmd, &block, &n_block); - else if (scsicmd[0] == VERIFY_16) - scsi_16_lba_len(scsicmd, &block, &n_block); - else + if (cdb[0] == VERIFY) { + if (scmd->cmd_len < 10) + goto invalid_fld; + scsi_10_lba_len(cdb, &block, &n_block); + } else if (cdb[0] == VERIFY_16) { + if (scmd->cmd_len < 16) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + } else goto invalid_fld; if (!n_block) @@ -1246,24 +1247,23 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); /* "Logical Block Address out of range" */ return 1; nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; + scmd->result = SAM_STAT_GOOD; return 1; } /** * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate * * Converts any of six SCSI read/write commands into the * ATA counterpart, including starting sector (LBA), @@ -1279,9 +1279,10 @@ nothing_to_do: * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) { + struct scsi_cmnd *scmd = qc->scsicmd; + const u8 *cdb = scmd->cmnd; struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; u64 block; @@ -1290,21 +1291,24 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm qc->flags |= ATA_QCFLAG_IO; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || - scsicmd[0] == WRITE_16) + if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16) tf->flags |= ATA_TFLAG_WRITE; /* Calculate the SCSI LBA, transfer length and FUA. */ - switch (scsicmd[0]) { + switch (cdb[0]) { case READ_10: case WRITE_10: - scsi_10_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) + if (unlikely(scmd->cmd_len < 10)) + goto invalid_fld; + scsi_10_lba_len(cdb, &block, &n_block); + if (unlikely(cdb[1] & (1 << 3))) tf->flags |= ATA_TFLAG_FUA; break; case READ_6: case WRITE_6: - scsi_6_lba_len(scsicmd, &block, &n_block); + if (unlikely(scmd->cmd_len < 6)) + goto invalid_fld; + scsi_6_lba_len(cdb, &block, &n_block); /* for 6-byte r/w commands, transfer length 0 * means 256 blocks of data, not 0 block. @@ -1314,8 +1318,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm break; case READ_16: case WRITE_16: - scsi_16_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) + if (unlikely(scmd->cmd_len < 16)) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + if (unlikely(cdb[1] & (1 << 3))) tf->flags |= ATA_TFLAG_FUA; break; default: @@ -1435,17 +1441,17 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); /* "Logical Block Address out of range" */ return 1; nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; + scmd->result = SAM_STAT_GOOD; return 1; } @@ -1565,7 +1571,6 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; - u8 *scsicmd = cmd->cmnd; int is_io = xlat_func == ata_scsi_rw_xlat; VPRINTK("ENTER\n"); @@ -1597,7 +1602,7 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, qc->complete_fn = ata_scsi_qc_complete; - if (xlat_func(qc, scsicmd)) + if (xlat_func(qc)) goto early_finish; /* select device, send command to hardware */ @@ -2462,7 +2467,6 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) /** * atapi_xlat - Initialize PACKET taskfile * @qc: command structure to be initialized - * @scsicmd: SCSI CDB associated with this PACKET command * * LOCKING: * spin_lock_irqsave(host lock) @@ -2470,25 +2474,25 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * RETURNS: * Zero on success, non-zero on failure. */ - -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { - struct scsi_cmnd *cmd = qc->scsicmd; + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); + int nodata = (scmd->sc_data_direction == DMA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ if (ata_check_atapi_dma(qc)) using_pio = 1; - memcpy(&qc->cdb, scsicmd, dev->cdb_len); + memset(qc->cdb, 0, dev->cdb_len); + memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len); qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { + if (scmd->sc_data_direction == DMA_TO_DEVICE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -2510,12 +2514,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) qc->tf.protocol = ATA_PROT_ATAPI_DMA; qc->tf.feature |= ATAPI_PKT_DMA; - if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE)) /* some SATA bridges need us to indicate data xfer direction */ qc->tf.feature |= ATAPI_DMADIR; } - qc->nbytes = cmd->request_bufflen; + qc->nbytes = scmd->request_bufflen; return 0; } @@ -2635,28 +2639,27 @@ ata_scsi_map_proto(u8 byte1) /** * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile * @qc: command structure to be initialized - * @scsicmd: SCSI command to convert * * Handles either 12 or 16-byte versions of the CDB. * * RETURNS: * Zero on success, non-zero on failure. */ -static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &(qc->tf); - struct scsi_cmnd *cmd = qc->scsicmd; + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; + const u8 *cdb = scmd->cmnd; - if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; /* We may not issue DMA commands if no DMA mode is set */ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; - if (scsicmd[1] & 0xe0) + if (cdb[1] & 0xe0) /* PIO multi not supported yet */ goto invalid_fld; @@ -2664,18 +2667,18 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) * 12 and 16 byte CDBs use different offsets to * provide the various register values. */ - if (scsicmd[0] == ATA_16) { + if (cdb[0] == ATA_16) { /* * 16-byte CDB - may contain extended commands. * * If that is the case, copy the upper byte register values. */ - if (scsicmd[1] & 0x01) { - tf->hob_feature = scsicmd[3]; - tf->hob_nsect = scsicmd[5]; - tf->hob_lbal = scsicmd[7]; - tf->hob_lbam = scsicmd[9]; - tf->hob_lbah = scsicmd[11]; + if (cdb[1] & 0x01) { + tf->hob_feature = cdb[3]; + tf->hob_nsect = cdb[5]; + tf->hob_lbal = cdb[7]; + tf->hob_lbam = cdb[9]; + tf->hob_lbah = cdb[11]; tf->flags |= ATA_TFLAG_LBA48; } else tf->flags &= ~ATA_TFLAG_LBA48; @@ -2683,26 +2686,26 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) /* * Always copy low byte, device and command registers. */ - tf->feature = scsicmd[4]; - tf->nsect = scsicmd[6]; - tf->lbal = scsicmd[8]; - tf->lbam = scsicmd[10]; - tf->lbah = scsicmd[12]; - tf->device = scsicmd[13]; - tf->command = scsicmd[14]; + tf->feature = cdb[4]; + tf->nsect = cdb[6]; + tf->lbal = cdb[8]; + tf->lbam = cdb[10]; + tf->lbah = cdb[12]; + tf->device = cdb[13]; + tf->command = cdb[14]; } else { /* * 12-byte CDB - incapable of extended commands. */ tf->flags &= ~ATA_TFLAG_LBA48; - tf->feature = scsicmd[3]; - tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[6]; - tf->lbah = scsicmd[7]; - tf->device = scsicmd[8]; - tf->command = scsicmd[9]; + tf->feature = cdb[3]; + tf->nsect = cdb[4]; + tf->lbal = cdb[5]; + tf->lbam = cdb[6]; + tf->lbah = cdb[7]; + tf->device = cdb[8]; + tf->command = cdb[9]; } /* * If slave is possible, enforce correct master/slave bit @@ -2729,7 +2732,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) */ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - if (cmd->sc_data_direction == DMA_TO_DEVICE) + if (scmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; /* @@ -2738,7 +2741,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) * TODO: find out if we need to do more here to * cover scatter/gather case. */ - qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; + qc->nsect = scmd->request_bufflen / ATA_SECT_SIZE; /* request result TF */ qc->flags |= ATA_QCFLAG_RESULT_TF; @@ -2746,7 +2749,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); /* "Invalid field in cdb" */ return 1; } @@ -2819,22 +2822,29 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *), struct ata_device *dev) { int rc = 0; + if (unlikely(!scmd->cmd_len)) { + ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n"); + scmd->result = DID_ERROR << 16; + done(scmd); + return 0; + } + if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, - cmd->cmnd[0]); + scmd->cmnd[0]); if (xlat_func) - rc = ata_scsi_translate(dev, cmd, done, xlat_func); + rc = ata_scsi_translate(dev, scmd, done, xlat_func); else - ata_scsi_simulate(dev, cmd, done); + ata_scsi_simulate(dev, scmd, done); } else - rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + rc = ata_scsi_translate(dev, scmd, done, atapi_xlat); return rc; } diff --git a/include/linux/libata.h b/include/linux/libata.h index abd2deb..7a4cf9e 100644 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-28 4:23 ` Tejun Heo @ 2006-12-28 19:46 ` Harald Dunkel 2007-01-02 11:55 ` Tejun Heo 0 siblings, 1 reply; 15+ messages in thread From: Harald Dunkel @ 2006-12-28 19:46 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1.1: Type: text/plain, Size: 511 bytes --] Hi Tejun, After the patch was applied (using 2.6.19.1 instead of 2.6.19, hope you don't mind) I could play a DVD once. Unfortunately this was not reproducible, using the same DVD. I have attached the requested log files for the good and the last bad session. Hope this helps. Which version of the SATA DVD writer have you received? The label on my writer says H/W:A Ver:A September 2006 I hope I don't break any netiquette by posting large log files. Do I? Many thanx Harri [-- Attachment #1.2: out.good.gz --] [-- Type: application/x-tar, Size: 11928 bytes --] [-- Attachment #1.3: kern.log.good.gz --] [-- Type: application/x-tar, Size: 6648 bytes --] [-- Attachment #1.4: out.bad.gz --] [-- Type: application/x-tar, Size: 730 bytes --] [-- Attachment #1.5: kern.log.bad.gz --] [-- Type: application/x-tar, Size: 6192 bytes --] [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-28 19:46 ` Harald Dunkel @ 2007-01-02 11:55 ` Tejun Heo 2007-01-02 19:20 ` Harald Dunkel 2007-01-08 19:08 ` Harald Dunkel 0 siblings, 2 replies; 15+ messages in thread From: Tejun Heo @ 2007-01-02 11:55 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List Hello, Harald Dunkel wrote: > Hi Tejun, > > After the patch was applied (using 2.6.19.1 instead of 2.6.19, hope > you don't mind) I could play a DVD once. Unfortunately this was not > reproducible, using the same DVD. I have attached the requested log > files for the good and the last bad session. Hope this helps. > > Which version of the SATA DVD writer have you received? The label > on my writer says > > H/W:A Ver:A September 2006 Mine is manufactured in December but other than that it's identical. Firmware version is the same too. > I hope I don't break any netiquette by posting large log files. > Do I? That's okay for me. vger might not be too happy tho. ;-) Please do the following and post the result. # strace mplayer -v dvd:// > out 2>&1 Happy new year. -- tejun ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2007-01-02 11:55 ` Tejun Heo @ 2007-01-02 19:20 ` Harald Dunkel 2007-01-08 19:08 ` Harald Dunkel 1 sibling, 0 replies; 15+ messages in thread From: Harald Dunkel @ 2007-01-02 19:20 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1.1: Type: text/plain, Size: 929 bytes --] Hi Tejun, Tejun Heo wrote: > > Please do the following and post the result. > > # strace mplayer -v dvd:// > out 2>&1 > See attachment. I was lucky: On the first run with strace mplayer could play the DVD (still using Tron). But this was not reproducible. Both strace files are attached. Hope this helps. I noticed something else: If I run regionset to report the supported region, then it returns on 64bit: % regionset regionset version 0.1 -- reads/sets region code on DVD drives Current Region Code settings: RPC Phase: Unknown (I) type: NONE vendor resets available: 0 user controlled changes resets available: 0 drive plays discs from region(s): 1 2 3 4 5 6 7 8, mask=0x00 I am pretty sure that this drive is not region-free. On 32bit (booting grml-0.9 from CD on a 2nd drive) I get the expected "region 2 only". Of course I used the same 32bit executable. Regards Harri [-- Attachment #1.2: strace.out.bad.gz --] [-- Type: application/x-tar, Size: 10977 bytes --] [-- Attachment #1.3: strace.out.good.gz --] [-- Type: application/x-tar, Size: 11653 bytes --] [-- Attachment #1.4: log.regionset.gz --] [-- Type: application/x-tar, Size: 1028 bytes --] [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2007-01-02 11:55 ` Tejun Heo 2007-01-02 19:20 ` Harald Dunkel @ 2007-01-08 19:08 ` Harald Dunkel 2007-01-17 14:20 ` Tejun Heo 1 sibling, 1 reply; 15+ messages in thread From: Harald Dunkel @ 2007-01-08 19:08 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 223 bytes --] Hi Tejun, Tejun Heo wrote: > Hello, > > Please do the following and post the result. > > # strace mplayer -v dvd:// > out 2>&1 > I had sent this out last week. Any news about this? Regards Harri [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2007-01-08 19:08 ` Harald Dunkel @ 2007-01-17 14:20 ` Tejun Heo 2007-01-17 21:46 ` Harald Dunkel 0 siblings, 1 reply; 15+ messages in thread From: Tejun Heo @ 2007-01-17 14:20 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List Harald Dunkel wrote: > Hi Tejun, > > Tejun Heo wrote: >> Hello, >> >> Please do the following and post the result. >> >> # strace mplayer -v dvd:// > out 2>&1 >> > > I had sent this out last week. Any news about this? Okay, I just tested a number of dvds on x86-64 and x86. The error pattern is really interesting. It doesn't matter whether you're on x86-64 or x86, 2.6.18 or 2.6.20-rc5. The problem occurs when a dvd which doesn't match dvd's region mask is played. MMC command 0xa4 (READ KEY) is the one which always fails. After the failure, the odd goes into strange state and usually won't respond to commands. Interestingly, if you pull the power plug or reset the machine while the READ KEY command is in progress and then reconnect it, you can play the DVD after that. I've checked this multiple times and no, dvdcss key caching isn't the cause, crossed checked it multiple times. Once you played a dvd this way, the drive seems to remember the dvd and successfully plays it afterwards. I've checked this multiple times using completely separate OS installation (one x86, the other x86-64). This almost looks like new defense method against CSS-workaround. Can't understand why the drive remembers successfully played dvds tho. This is NOT a kernel/driver bug. Maybe libdvdread people are interested in it. You better take it to them. -- tejun ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2007-01-17 14:20 ` Tejun Heo @ 2007-01-17 21:46 ` Harald Dunkel 2007-01-18 1:22 ` Tejun Heo 0 siblings, 1 reply; 15+ messages in thread From: Harald Dunkel @ 2007-01-17 21:46 UTC (permalink / raw) To: Tejun Heo; +Cc: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 1689 bytes --] Hi Tejun, Tejun Heo wrote: > > Okay, I just tested a number of dvds on x86-64 and x86. The error > pattern is really interesting. It doesn't matter whether you're on > x86-64 or x86, 2.6.18 or 2.6.20-rc5. The problem occurs when a dvd > which doesn't match dvd's region mask is played. > > MMC command 0xa4 (READ KEY) is the one which always fails. After the > failure, the odd goes into strange state and usually won't respond to > commands. Interestingly, if you pull the power plug or reset the > machine while the READ KEY command is in progress and then reconnect it, > you can play the DVD after that. I've checked this multiple times and > no, dvdcss key caching isn't the cause, crossed checked it multiple times. > > Once you played a dvd this way, the drive seems to remember the dvd and > successfully plays it afterwards. I've checked this multiple times > using completely separate OS installation (one x86, the other x86-64). > How comes that there is no such problem if I connect the drive via an USB SATA adapter? > This almost looks like new defense method against CSS-workaround. Can't > understand why the drive remembers successfully played dvds tho. > I would have the option to return it (playing no DVDs is surely a defect), but this would be a shame. It was lightning fast on writing, a little bit noisy, though, but I was really glad to get rid of that clumsy parallel cable. Do you think it would be reasonable to send a bug report to Samsung, and see what they say? I would need some documentation about these MMC commands, though. Is this part of some "Red Book" standard, or so? Regards Harri [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2007-01-17 21:46 ` Harald Dunkel @ 2007-01-18 1:22 ` Tejun Heo 0 siblings, 0 replies; 15+ messages in thread From: Tejun Heo @ 2007-01-18 1:22 UTC (permalink / raw) To: Harald Dunkel; +Cc: Kernel Mailing List Harald Dunkel wrote: > How comes that there is no such problem if I connect the drive > via an USB SATA adapter? Ah... right. I forgot about that. Scrap my analysis. What happens is really weird tho. > Do you think it would be reasonable to send a bug report to Samsung, > and see what they say? I would need some documentation about these > MMC commands, though. Is this part of some "Red Book" standard, or > so? Yeap, reporting is probably a good idea. libdvdread ppl would be interested too. MMC is SCSI command set standard for ODDs and can be found at t10.org. I don't think we can proceed with kernel debugging before gathering more info about this problem. Feel free to cc me when you ask people about this problem. I really like the dvd writer and would love to see the problem ironed out. Thanks. -- tejun ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work 2006-12-16 15:56 2.6.19.1, sata_sil: sata dvd writer doesn't work Harald Dunkel 2006-12-19 14:34 ` Tejun Heo @ 2006-12-26 11:27 ` Harald Dunkel 1 sibling, 0 replies; 15+ messages in thread From: Harald Dunkel @ 2006-12-26 11:27 UTC (permalink / raw) To: htejun; +Cc: Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 406 bytes --] Harald Dunkel wrote: > Hi folks, > > I've got a problem with a Samsung SATA dvd writer: It > doesn't play video DVDs. If I connect the same drive > via an adapter to USB, then there is no such problem. > PS: To make sure that its not a hardware problem I have tried this drive in another PC, using ata_piix for sata. Same kernel, but 32bit. There was no problem here. Regards Harri [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 252 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2007-01-18 1:22 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-12-16 15:56 2.6.19.1, sata_sil: sata dvd writer doesn't work Harald Dunkel 2006-12-19 14:34 ` Tejun Heo 2006-12-19 18:42 ` Harald Dunkel 2006-12-19 23:59 ` Tejun Heo 2006-12-21 19:52 ` Harald Dunkel 2006-12-27 5:03 ` Tejun Heo 2006-12-28 4:23 ` Tejun Heo 2006-12-28 19:46 ` Harald Dunkel 2007-01-02 11:55 ` Tejun Heo 2007-01-02 19:20 ` Harald Dunkel 2007-01-08 19:08 ` Harald Dunkel 2007-01-17 14:20 ` Tejun Heo 2007-01-17 21:46 ` Harald Dunkel 2007-01-18 1:22 ` Tejun Heo 2006-12-26 11:27 ` Harald Dunkel
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.