* Dell PE2950 with adaptec 39320A scsi card : card dump while using Dell PV110T LTO2 tapedrive
@ 2007-02-15 7:52 Maarten De Wispelaere
0 siblings, 0 replies; only message in thread
From: Maarten De Wispelaere @ 2007-02-15 7:52 UTC (permalink / raw)
To: linux-scsi
Hi,
I'm having the following problem with my PE 2950 and PV110T LTO2 tapedrive :
At the end of my backup, I'm getting a Card Dump (see contents of
/var/log/messages below).
My backupscript uses simple tar and mt command and runs fine on another
machine with a DLT drive.
The scsi card is an adaptec 39320A - bought direct from Dell (came
mounted with the server).
I'm running CentOS 4.4 on this machine, with the following kernel :
Linux cheetah.svr.woladm.bel.erba 2.6.9-42.0.8.ELsmp #1 SMP Tue Jan 30
12:18:01 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
Is there anyone on this list that has had these kind of problems before
? As far as I know, I'm using the correct kernel-module for the card
aic79xx
Or should I use another one ?
What follows are the errors in /var/log/messages
and the output of lsmod
I hope someone on this recognizes the problem.
Thanks in advance,
regards,
Maarten
--
Maarten De Wispelaere
Hardware & Network Manager
SA ERBA Holding NV
St. Lambertusstraat 198
1200 Brussel
Tel. : +32 2 775 03 24
Fax : +32 2 775 03 49
--------------------------------------
/var/log/messages :
Feb 14 00:02:55 cheetah kernel: scsi0:0:6:0: Attempting to abort cmd
00000102cf454080: 0x1b 0x0 0x0 0x0 0x2 0x0
Feb 14 00:02:55 cheetah kernel: scsi0: At time of recovery, card was not
paused
Feb 14 00:02:55 cheetah kernel: >>>>>>>>>>>>>>>>>> Dump Card State
Begins <<<<<<<<<<<<<<<<<
Feb 14 00:02:55 cheetah kernel: scsi0: Dumping Card State at program
address 0x27 Mode 0x11
Feb 14 00:02:55 cheetah kernel: Card was paused
Feb 14 00:02:55 cheetah kernel: HS_MAILBOX[0x0] INTCTL[0x80]
SEQINTSTAT[0x0] SAVED_MODE[0x11]
Feb 14 00:02:55 cheetah kernel: DFFSTAT[0x33] SCSISIGI[0x0]
SCSIPHASE[0x0] SCSIBUS[0x0]
Feb 14 00:02:55 cheetah kernel: LASTPHASE[0x1] SCSISEQ0[0x0]
SCSISEQ1[0x12] SEQCTL0[0x0]
Feb 14 00:02:55 cheetah kernel: SEQINTCTL[0x0] SEQ_FLAGS[0xc0]
SEQ_FLAGS2[0x0] SSTAT0[0x0]
Feb 14 00:02:55 cheetah kernel: SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]
Feb 14 00:02:55 cheetah kernel: SIMODE1[0xa4] LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x0]
Feb 14 00:02:55 cheetah kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
Feb 14 00:02:55 cheetah kernel:
Feb 14 00:02:55 cheetah kernel: SCB Count = 4 CMDS_PENDING = 1 LASTSCB
0xffff CURRSCB 0x3 NEXTSCB 0x0
Feb 14 00:02:55 cheetah kernel: qinstart = 23615 qinfifonext = 23615
Feb 14 00:02:55 cheetah kernel: QINFIFO:
Feb 14 00:02:55 cheetah kernel: WAITING_TID_QUEUES:
Feb 14 00:02:55 cheetah kernel: Pending list:
Feb 14 00:02:55 cheetah kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x44]
SCB_SCSIID[0x67]
Feb 14 00:02:55 cheetah kernel: Total 1
Feb 14 00:02:55 cheetah kernel: Kernel Free SCB list: 2 1 0
Feb 14 00:02:55 cheetah kernel: Sequencer Complete DMA-inprog list:
Feb 14 00:02:55 cheetah kernel: Sequencer Complete list:
Feb 14 00:02:55 cheetah kernel: Sequencer DMA-Up and Complete list:
Feb 14 00:02:55 cheetah kernel:
Feb 14 00:02:55 cheetah kernel: scsi0: FIFO0 Free, LONGJMP == 0x80ff,
SCB 0x0
Feb 14 00:02:55 cheetah kernel: SEQIMODE[0x3f] SEQINTSRC[0x0]
DFCNTRL[0x0] DFSTATUS[0x89]
Feb 14 00:02:55 cheetah kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Feb 14 00:02:55 cheetah kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR =
0x00, SHCNT = 0x0
Feb 14 00:02:55 cheetah kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Feb 14 00:02:55 cheetah kernel: scsi0: FIFO1 Free, LONGJMP == 0x81d8,
SCB 0x3
Feb 14 00:02:55 cheetah kernel: SEQIMODE[0x3f] SEQINTSRC[0x0]
DFCNTRL[0x4] DFSTATUS[0x89]
Feb 14 00:02:55 cheetah kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Feb 14 00:02:55 cheetah kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR =
0x00, SHCNT = 0x0
Feb 14 00:02:55 cheetah kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Feb 14 00:02:55 cheetah kernel: LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Feb 14 00:02:55 cheetah kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Feb 14 00:02:55 cheetah kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Feb 14 00:02:55 cheetah kernel: SIMODE0[0xc]
Feb 14 00:02:55 cheetah kernel: CCSCBCTL[0x4]
Feb 14 00:02:55 cheetah kernel: scsi0: REG0 == 0x3, SINDEX = 0x1bc,
DINDEX = 0x1be
Feb 14 00:02:55 cheetah kernel: scsi0: SCBPTR == 0x3, SCB_NEXT ==
0xff00, SCB_NEXT2 == 0xff4e
Feb 14 00:02:55 cheetah kernel: CDB 1b 0 0 0 2 0
Feb 14 00:02:55 cheetah kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Feb 14 00:02:55 cheetah kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Feb 14 00:02:55 cheetah kernel: DevQ(0:6:0): 0 waiting
Feb 14 00:02:55 cheetah kernel: (scsi0:A:6:0): Device is disconnected,
re-queuing SCB
Feb 14 00:02:55 cheetah kernel: Recovery code sleeping
Feb 14 00:02:55 cheetah kernel: (scsi0:A:6:0): Abort Message Sent
Feb 14 00:02:55 cheetah kernel: (scsi0:A:6:0): SCB 3 - Abort Tag Completed.
Feb 14 00:02:55 cheetah kernel: Recovery SCB completes
Feb 14 00:02:55 cheetah kernel: found == 0x1
Feb 14 00:02:55 cheetah kernel: Recovery code awake
--------------------------------------
lsmod :
[root@cheetah ~]# lsmod
Module Size Used by
nfs 246641 0
sg 42873 0
vmnet 47368 8
parport_pc 29569 0
parport 44493 1 parport_pc
vmmon 160020 22
mptctl 34505 2
mptbase 66977 1 mptctl
dell_rbu 8553 0
nfsd 278113 17
exportfs 8001 1 nfsd
lockd 78449 3 nfs,nfsd
nfs_acl 5313 2 nfs,nfsd
sunrpc 176441 13 nfs,nfsd,lockd,nfs_acl
autofs4 24393 0
ipmi_devintf 12241 2
ipmi_si 40545 1
ipmi_msghandler 33349 2 ipmi_devintf,ipmi_si
dm_mirror 32721 0
dm_mod 68609 1 dm_mirror
button 9313 0
battery 11465 0
ac 6985 0
sr_mod 20965 0
usb_storage 71561 0
joydev 12097 0
md5 5953 1
ipv6 284193 29
uhci_hcd 35049 0
ehci_hcd 33989 0
hw_random 7393 0
bnx2 147509 0
st 42213 0
ext3 138193 3
jbd 69105 1 ext3
megaraid_sas 36217 6
aic79xx 178109 0
sd_mod 19393 5
scsi_mod 141457 7
sg,sr_mod,usb_storage,st,megaraid_sas,aic79xx,sd_mod
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-15 7:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-15 7:52 Dell PE2950 with adaptec 39320A scsi card : card dump while using Dell PV110T LTO2 tapedrive Maarten De Wispelaere
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.