* [Xenomai-core] x86_64 - Initial results.
@ 2007-02-24 15:26 Paul
2007-02-24 15:56 ` Philippe Gerum
0 siblings, 1 reply; 13+ messages in thread
From: Paul @ 2007-02-24 15:26 UTC (permalink / raw)
To: xenomai
Hi Philippe
First off, thanks for all your hard work and late nights (and the rest of the
team) for the x86_64.
Initial results look promising with the latency test reporting figures in the
0.5 to 4 uSec range under light load. A kernel compile bumps the wost up to
9-14uSec. Firing up X,KDE, and a gamut of desktop apps really kills the
numbers though - ~267uSec being the worst recorded so far, however, once
X/KDE has started up, latencies are generally <30uSec.
One small problem to report from the compile... With
CONFIG_XENO_OPT_NUCLEUS=m, the build fails with:
WARNING: "cpu_gdt_descr" [kernel/xenomai/nucleus/xeno_nucleus.ko] undefined!
make[1]: *** [__modpost] Error 1
What would the preferred solution be - Export cpu_gdt_descr as it is with
i386, or force xeno_nucleus to be built in ?
Regards, Paul.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-24 15:26 [Xenomai-core] x86_64 - Initial results Paul
@ 2007-02-24 15:56 ` Philippe Gerum
2007-02-24 16:55 ` Paul
0 siblings, 1 reply; 13+ messages in thread
From: Philippe Gerum @ 2007-02-24 15:56 UTC (permalink / raw)
To: Paul; +Cc: xenomai
On Sat, 2007-02-24 at 15:26 +0000, Paul wrote:
> Hi Philippe
>
> First off, thanks for all your hard work and late nights (and the rest of the
> team) for the x86_64.
>
> Initial results look promising with the latency test reporting figures in the
> 0.5 to 4 uSec range under light load. A kernel compile bumps the wost up to
> 9-14uSec.
Not bad. Is this a UP or SMP config, and which kind of box did run the
tests precisely?
> Firing up X,KDE, and a gamut of desktop apps really kills the
> numbers though - ~267uSec being the worst recorded so far,
Ok, the latter looks clearly pathological. The trace should tell us
more.
> however, once
> X/KDE has started up, latencies are generally <30uSec.
>
> One small problem to report from the compile... With
> CONFIG_XENO_OPT_NUCLEUS=m, the build fails with:
>
> WARNING: "cpu_gdt_descr" [kernel/xenomai/nucleus/xeno_nucleus.ko] undefined!
> make[1]: *** [__modpost] Error 1
>
> What would the preferred solution be - Export cpu_gdt_descr as it is with
> i386, or force xeno_nucleus to be built in ?
>
We can export it, it's already a global symbol anyway. I've now added
the proper EXPORT_SYMBOL_GPL in my local repo. Thanks for pointing this
out.
>
> Regards, Paul.
>
> _______________________________________________
> Xenomai-core mailing list
> Xenomai-core@domain.hid
> https://mail.gna.org/listinfo/xenomai-core
--
Philippe.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-24 15:56 ` Philippe Gerum
@ 2007-02-24 16:55 ` Paul
2007-02-24 17:17 ` Philippe Gerum
0 siblings, 1 reply; 13+ messages in thread
From: Paul @ 2007-02-24 16:55 UTC (permalink / raw)
To: rpm; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 887 bytes --]
On Saturday 24 February 2007 15:56, Philippe Gerum wrote:
> > Initial results look promising with the latency test reporting figures
> > in the 0.5 to 4 uSec range under light load. A kernel compile bumps the
> > wost up to 9-14uSec.
>
> Not bad. Is this a UP or SMP config, and which kind of box did run the
> tests precisely?
AMD X2 4600+ with SMP config - MoBo is an Asus A8V with a Via K8T800Pro
chipset and a measly 512M of RAM.
> > Firing up X,KDE, and a gamut of desktop apps really kills the
> > numbers though - ~267uSec being the worst recorded so far,
>
> Ok, the latter looks clearly pathological. The trace should tell us
> more.
The latency log ?
Attached is some three hours worth of log - Should point out there are no
proprietory video drivers being used, just the regular Xorg stuff and what
ever the kernel provides.
Regards, Paul.
[-- Attachment #2: latency.log.bz2 --]
[-- Type: application/x-bzip2, Size: 53034 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-24 16:55 ` Paul
@ 2007-02-24 17:17 ` Philippe Gerum
2007-02-25 1:06 ` Paul
0 siblings, 1 reply; 13+ messages in thread
From: Philippe Gerum @ 2007-02-24 17:17 UTC (permalink / raw)
To: Paul; +Cc: xenomai
On Sat, 2007-02-24 at 16:55 +0000, Paul wrote:
> On Saturday 24 February 2007 15:56, Philippe Gerum wrote:
> > > Initial results look promising with the latency test reporting figures
> > > in the 0.5 to 4 uSec range under light load. A kernel compile bumps the
> > > wost up to 9-14uSec.
> >
> > Not bad. Is this a UP or SMP config, and which kind of box did run the
> > tests precisely?
>
> AMD X2 4600+ with SMP config - MoBo is an Asus A8V with a Via K8T800Pro
> chipset and a measly 512M of RAM.
>
Ok.
> > > Firing up X,KDE, and a gamut of desktop apps really kills the
> > > numbers though - ~267uSec being the worst recorded so far,
> >
> > Ok, the latter looks clearly pathological. The trace should tell us
> > more.
>
> The latency log ?
Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
set, but the latency log already has some value, thanks.
> Attached is some three hours worth of log - Should point out there are no
> proprietory video drivers being used, just the regular Xorg stuff and what
> ever the kernel provides.
>
Looking at this log, the good news is that latency peaks are not spread
all over the place, but only a few of them are bugging us. This tend to
confirm a bad interference exists with something specific to the X
startup procedure (maybe/likely? related to the graphic card). Does the
peak still occur if you disable hw acceleration for the graphic card in
your XF86Config file?
>
> Regards, Paul.
>
--
Philippe.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-24 17:17 ` Philippe Gerum
@ 2007-02-25 1:06 ` Paul
2007-02-25 10:02 ` Jan Kiszka
0 siblings, 1 reply; 13+ messages in thread
From: Paul @ 2007-02-25 1:06 UTC (permalink / raw)
To: rpm; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 564 bytes --]
Hi Philippe
On Saturday 24 February 2007 17:17, Philippe Gerum wrote:
> > > Ok, the latter looks clearly pathological. The trace should tell us
> > > more.
> Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
> set
Had to recompile without SMP (see attached config), so used the -03 ipipe
patch with xenomai r2248. Started the latency test, and then fired up X (no
WM) - At which point the latency went in to a zombie state with a massive
hike in value. ipipe/trace/max, latency log, and dmesg outputs all attached.
Regards, Paul.
[-- Attachment #2: config-2.6.19.3-xenomai --]
[-- Type: text/plain, Size: 41757 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19.3
# Sat Feb 24 23:28:08 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-xenomai"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_OPT_NUCLEUS=m
CONFIG_XENO_OPT_PERVASIVE=y
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_SECURITY_ACCESS=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY=y
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_SYS_HEAPSZ=128
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_TIMERLAT=0
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0
#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set
#
# Shared interrupts
#
# CONFIG_XENO_OPT_SHIRQ_LEVEL is not set
# CONFIG_XENO_OPT_SHIRQ_EDGE is not set
#
# Machine
#
CONFIG_XENO_HW_FPU=y
#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
# CONFIG_XENO_HW_SMI_WORKAROUND is not set
#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=m
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=4096
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_SKIN_POSIX=m
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
CONFIG_XENO_SKIN_RTDM=m
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
#
# Drivers
#
#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set
#
# Testing drivers
#
CONFIG_XENO_DRIVERS_TIMERBENCH=m
CONFIG_XENO_DRIVERS_IRQBENCH=m
CONFIG_XENO_DRIVERS_SWITCHTEST=m
#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_BKL is not set
CONFIG_IPIPE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_MSI_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_PATA_AMD=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
# CONFIG_FIXED_MII_100_FDX is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not set
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TDA9875 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
#
# Video decoders
#
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA7111 is not set
# CONFIG_VIDEO_SAA7114 is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
#
# MPEG video encoders
#
#
# Video encoders
#
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_IPIPE_DEBUG=y
CONFIG_IPIPE_TRACE=y
# CONFIG_IPIPE_TRACE_ENABLE is not set
# CONFIG_IPIPE_TRACE_MCOUNT is not set
CONFIG_IPIPE_TRACE_IRQSOFF=y
CONFIG_IPIPE_TRACE_SHIFT=14
CONFIG_IPIPE_TRACE_VMALLOC=y
CONFIG_IPIPE_TRACE_ENABLE_VALUE=0
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
[-- Attachment #3: dmesg --]
[-- Type: text/plain, Size: 4548 bytes --]
[ 0.000000] Linux version 2.6.19.3-xenomai (paul@domain.hid) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 PREEMPT Sat Feb 24 23:32:49 GMT 2007
[ 0.000000] Command line: root=/dev/sda2 ro splash=silent vga=788
<snip>
[ 164.679555] I-pipe: Domain Xenomai registered.
[ 164.682071] Xenomai: hal/x86_64 started.
[ 164.741518] Xenomai: real-time nucleus v2.4-devel (Bells Of Lal) loaded.
[ 164.840492] Xenomai: starting native API services.
[ 164.896648] Xenomai: starting RTDM services.
[ 508.132034] NMI Watchdog detected LOCKUP on CPU 0
[ 508.132207] CPU 0
[ 508.132347] Modules linked in: xeno_timerbench xeno_rtdm xeno_native xeno_nucleus ppdev lp ipv6 w83627hf hwmon_vid i2c_isa loop tsdev serio_raw psmouse i2c_viapro i2c_core parport_pc parport pcspkr evdev sd_mod ide_cd cdrom ide_disk pata_via ata_generic generic sata_via libata via82cxxx ide_core scsi_mod 8139too mii skge
[ 508.134563] Pid: 2679, comm: sampling-2677 Not tainted 2.6.19.3-xenomai #2
[ 508.134805] RIP: 0010:[<ffffffff8818f4a7>] [<ffffffff8818f4a7>] :xeno_native:rt_task_wait_period+0x37/0x40
[ 508.135605] RSP: 0018:ffff810018313e08 EFLAGS: 00000292
[ 508.135826] RAX: 0000000000000000 RBX: ffff810018313f58 RCX: 00000000000022e9
[ 508.136088] RDX: ffffffff80506d01 RSI: 00000000000022e7 RDI: 0000000000000000
[ 508.136353] RBP: ffff810018313e08 R08: 0000000000000001 R09: 00002b8bc6154e2e
[ 508.136614] R10: 0000000000000000 R11: 0000000000000206 R12: 00000000fffffff2
[ 508.136883] R13: ffff810018313e28 R14: 0000000058454e4f R15: ffff810018f20f50
[ 508.137165] FS: 0000000040021960(0063) GS:ffffffff80559000(0000) knlGS:0000000000000000
[ 508.137463] CS: 0010 DS: 0000 ES: 0000 CR0: 00000000c005003b
[ 508.137703] CR2: 00002b100104d000 CR3: 0000000018a06000 CR4: 00000000000006e0
[ 508.137946] I-pipe domain Xenomai
[ 508.138086] Stack: ffff810018313e48 ffffffff881929fc 0000000000000000 ffffffff8026999a
[ 508.138565] 0000000000000000 ffff810018313f58 0000000000000006 ffff81001aada7f0
[ 508.138985] ffff810018313e98 ffffffff8816853b 0000000000000000 0000000000000038
[ 508.139363] Call Trace:
[ 508.140144] [<ffffffff881929fc>] :xeno_native:__rt_task_wait_period+0x4c/0x90
[ 508.141764] [<ffffffff8816853b>] :xeno_nucleus:hisyscall_event+0x1bb/0x300
[ 508.143508] [<ffffffff802ba2d7>] __ipipe_dispatch_event+0xc7/0x1b0
[ 508.143978] [<ffffffff8027d22d>] __ipipe_syscall_root+0x8d/0x180
[ 508.144428] [<ffffffff8026ff49>] __ipipe_syscall_root_thunk+0x35/0x3a
[ 508.144869] [<ffffffff80269337>] system_call+0x57/0x9b
[ 508.145249] [<0000000040021138>]
[ 508.145389]
[ 508.145484]
[ 508.145540] Code: c9 c3 66 66 66 90 66 66 90 55 48 89 e5 53 48 83 ec 08 48 8b
[ 508.147930] <6>note: sampling-2677[2679] exited with preempt_count 2
[ 508.150390] BUG: soft lockup detected on CPU#0!
[ 508.150394]
[ 508.150395] Call Trace:
[ 508.150410] [<ffffffff8027450c>] dump_trace+0xbc/0x420
[ 508.150416] [<ffffffff802748b3>] show_trace+0x43/0x60
[ 508.150421] [<ffffffff802748e5>] dump_stack+0x15/0x20
[ 508.150427] [<ffffffff802b649a>] softlockup_tick+0xca/0x120
[ 508.150432] [<ffffffff802563f3>] run_local_timers+0x13/0x20
[ 508.150437] [<ffffffff80298147>] update_process_times+0x57/0x90
[ 508.150442] [<ffffffff8027777b>] main_timer_handler+0x20b/0x4c0
[ 508.150446] [<ffffffff80277a42>] timer_interrupt+0x12/0x30
[ 508.150451] [<ffffffff80210acf>] handle_IRQ_event+0x2f/0x70
[ 508.150456] [<ffffffff802b8b00>] handle_edge_irq+0x130/0x1d0
[ 508.150460] [<ffffffff802760b8>] do_IRQ+0x58/0xa0
[ 508.150465] [<ffffffff802698b6>] __ipipe_root_xirq_thunk+0x46/0x50
[ 508.150470] [<ffffffff802698bb>] __ipipe_root_xirq_thunk+0x4b/0x50
[ 508.150915] DWARF2 unwinder stuck at __ipipe_root_xirq_thunk+0x4b/0x50
[ 508.150917]
[ 508.150918] Leftover inexact backtrace:
[ 508.150920]
[ 508.150924] [<ffffffff802b990a>] __ipipe_sync_stage+0x10a/0x1d0
[ 508.150944] [<ffffffff802b9d54>] __ipipe_unstall_root+0x34/0x50
[ 508.150947] [<ffffffff802b9d85>] __ipipe_restore_root+0x15/0x20
[ 508.150951] [<ffffffff8027a7c9>] set_mtrr+0xc9/0xe0
[ 508.150956] [<ffffffff8027adbd>] mtrr_add_page+0x26d/0x2c0
[ 508.150961] [<ffffffff8027b204>] mtrr_file_add+0xb4/0xe0
[ 508.150965] [<ffffffff8027b4b1>] mtrr_ioctl+0x281/0x530
[ 508.150972] [<ffffffff80249051>] do_ioctl+0x31/0xa0
[ 508.150976] [<ffffffff80233c32>] vfs_ioctl+0x2a2/0x2d0
[ 508.150981] [<ffffffff80254f7a>] sys_ioctl+0x4a/0x80
[ 508.150985] [<ffffffff80269376>] system_call+0x96/0x9b
[ 508.150989]
[-- Attachment #4: ipipe.trace.max --]
[-- Type: text/plain, Size: 1307 bytes --]
I-pipe worst-case tracing service on 2.6.19.3-xenomai/ipipe-1.0-03
------------------------------------------------------------
******** WARNING ********
The following debugging options will increase the observed latencies:
o CONFIG_DEBUG_PREEMPT
Begin: 396226610423 cycles, Trace Points: 2 (-10/+1), Length: 4001 us
Calibrated minimum trace-point overhead: 0.039 us
+--------------- Hard IRQs ('|': locked)
| +- Delay flag ('+': > 1 us, '!': > 10 us)
| |
Type Time Function (Parent)
|begin -2 ipipe_critical_enter (ipipe_catch_event)
|end -2 ipipe_critical_exit (ipipe_catch_event)
|begin -2 ipipe_critical_enter (ipipe_catch_event)
|end -2 ipipe_critical_exit (ipipe_catch_event)
|begin -2 ipipe_critical_enter (ipipe_catch_event)
|end -2 ipipe_critical_exit (ipipe_catch_event)
|begin -1 xnpod_enable_timesource (xnpod_init)
|end -1 __ipipe_restore_pipeline_head (xnpod_enable_timesource)
|begin 0 ipipe_virtualize_irq (rthal_irq_release)
|end 0 ipipe_virtualize_irq (rthal_irq_release)
>|begin 0! ipipe_critical_enter (rthal_critical_enter)
<|end 4001 ipipe_critical_exit (rthal_critical_exit)
|begin 4001 ipipe_trace_begin_thunk (ipipe_critical_exit)
[-- Attachment #5: latency.log --]
[-- Type: text/x-log, Size: 28956 bytes --]
*
*
* Type ^C to stop this application.
*
*
== Sampling period: 100 us
== Test mode: periodic user-mode task
== All results in microseconds
warming up...
RTT| 00:00:01 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.273| 1.351| 2.596| 0| 1.273| 2.596
RTD| 1.025| 1.354| 5.171| 0| 1.025| 5.171
RTD| 1.115| 1.346| 5.164| 0| 1.025| 5.171
RTD| 1.076| 1.348| 4.997| 0| 1.025| 5.171
RTD| 1.054| 1.343| 4.998| 0| 1.025| 5.171
RTD| 1.056| 1.365| 5.401| 0| 1.025| 5.401
RTD| 1.285| 1.365| 2.781| 0| 1.025| 5.401
RTD| 1.049| 1.375| 3.705| 0| 1.025| 5.401
RTD| 1.066| 1.365| 3.527| 0| 1.025| 5.401
RTD| 1.071| 1.366| 5.327| 0| 1.025| 5.401
RTD| 1.149| 1.361| 5.175| 0| 1.025| 5.401
RTD| 1.276| 1.363| 2.827| 0| 1.025| 5.401
RTD| 1.283| 1.360| 2.932| 0| 1.025| 5.401
RTD| 1.086| 1.365| 2.541| 0| 1.025| 5.401
RTD| 1.140| 1.371| 3.460| 0| 1.025| 5.401
RTD| 1.272| 1.364| 2.971| 0| 1.025| 5.401
RTD| 1.119| 1.361| 5.555| 0| 1.025| 5.555
RTD| 1.114| 1.361| 6.218| 0| 1.025| 6.218
RTD| 1.283| 1.359| 2.648| 0| 1.025| 6.218
RTD| 1.080| 1.367| 3.346| 0| 1.025| 6.218
RTD| 1.103| 1.376| 3.436| 0| 1.025| 6.218
RTT| 00:00:22 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.116| 1.373| 4.036| 0| 1.025| 6.218
RTD| 1.163| 1.373| 3.499| 0| 1.025| 6.218
RTD| 1.285| 1.368| 3.099| 0| 1.025| 6.218
RTD| 1.071| 1.369| 3.416| 0| 1.025| 6.218
RTD| 1.123| 1.381| 3.769| 0| 1.025| 6.218
RTD| 1.121| 1.388| 3.610| 0| 1.025| 6.218
RTD| 1.163| 1.381| 2.978| 0| 1.025| 6.218
RTD| 1.283| 1.373| 2.564| 0| 1.025| 6.218
RTD| 1.152| 1.367| 2.522| 0| 1.025| 6.218
RTD| 1.129| 1.359| 3.388| 0| 1.025| 6.218
RTD| 1.279| 1.360| 2.778| 0| 1.025| 6.218
RTD| 1.275| 1.362| 2.858| 0| 1.025| 6.218
RTD| 1.273| 1.361| 2.745| 0| 1.025| 6.218
RTD| 1.087| 1.359| 2.824| 0| 1.025| 6.218
RTD| 1.128| 1.365| 3.368| 0| 1.025| 6.218
RTD| 1.280| 1.360| 2.751| 0| 1.025| 6.218
RTD| 1.278| 1.366| 3.169| 0| 1.025| 6.218
RTD| 1.279| 1.364| 2.657| 0| 1.025| 6.218
RTD| 1.182| 1.359| 3.018| 0| 1.025| 6.218
RTD| 1.051| 1.357| 2.443| 0| 1.025| 6.218
RTD| 1.282| 1.359| 2.581| 0| 1.025| 6.218
RTT| 00:00:43 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.289| 1.370| 2.586| 0| 1.025| 6.218
RTD| 1.277| 1.361| 2.573| 0| 1.025| 6.218
RTD| 1.284| 1.371| 2.567| 0| 1.025| 6.218
RTD| 1.140| 1.362| 3.252| 0| 1.025| 6.218
RTD| 1.284| 1.370| 2.924| 0| 1.025| 6.218
RTD| 1.271| 1.361| 2.739| 0| 1.025| 6.218
RTD| 1.276| 1.364| 3.291| 0| 1.025| 6.218
RTD| 1.282| 1.364| 3.325| 0| 1.025| 6.218
RTD| 1.086| 1.373| 2.855| 0| 1.025| 6.218
RTD| 1.128| 1.368| 2.831| 0| 1.025| 6.218
RTD| 1.150| 1.381| 3.116| 0| 1.025| 6.218
RTD| 1.279| 1.360| 2.667| 0| 1.025| 6.218
RTD| 1.283| 1.371| 3.054| 0| 1.025| 6.218
RTD| 1.086| 1.371| 3.048| 0| 1.025| 6.218
RTD| 1.135| 1.350| 2.359| 0| 1.025| 6.218
RTD| 1.279| 1.357| 2.686| 0| 1.025| 6.218
RTD| 1.276| 1.369| 2.624| 0| 1.025| 6.218
RTD| 1.121| 1.421| 5.352| 0| 1.025| 6.218
RTD| 1.076| 1.426| 5.472| 0| 1.025| 6.218
RTD| 1.073| 1.363| 2.364| 0| 1.025| 6.218
RTD| 1.287| 1.370| 2.787| 0| 1.025| 6.218
RTT| 00:01:04 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.285| 1.363| 2.755| 0| 1.025| 6.218
RTD| 1.288| 1.370| 3.212| 0| 1.025| 6.218
RTD| 1.286| 1.369| 3.251| 0| 1.025| 6.218
RTD| 1.105| 1.364| 2.753| 0| 1.025| 6.218
RTD| 1.294| 1.370| 3.221| 0| 1.025| 6.218
RTD| 1.290| 1.371| 2.718| 0| 1.025| 6.218
RTD| 1.270| 1.361| 2.900| 0| 1.025| 6.218
RTD| 1.115| 1.372| 2.991| 0| 1.025| 6.218
RTD| 1.155| 1.347| 2.612| 0| 1.025| 6.218
RTD| 1.284| 1.370| 2.629| 0| 1.025| 6.218
RTD| 1.286| 1.363| 3.001| 0| 1.025| 6.218
RTD| 1.288| 1.367| 3.012| 0| 1.025| 6.218
RTD| 1.285| 1.370| 2.769| 0| 1.025| 6.218
RTD| 1.106| 1.364| 2.688| 0| 1.025| 6.218
RTD| 1.116| 1.371| 3.586| 0| 1.025| 6.218
RTD| 1.153| 1.371| 2.790| 0| 1.025| 6.218
RTD| 1.166| 1.371| 3.462| 0| 1.025| 6.218
RTD| 1.061| 1.375| 5.582| 0| 1.025| 6.218
RTD| 1.177| 1.374| 3.925| 0| 1.025| 6.218
RTD| 1.089| 1.383| 3.737| 0| 1.025| 6.218
RTD| 1.132| 1.379| 2.550| 0| 1.025| 6.218
RTT| 00:01:25 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.104| 1.379| 3.538| 0| 1.025| 6.218
RTD| 1.058| 1.364| 2.850| 0| 1.025| 6.218
RTD| 1.288| 1.366| 2.723| 0| 1.025| 6.218
RTD| 1.124| 1.380| 3.206| 0| 1.025| 6.218
RTD| 1.281| 1.366| 3.234| 0| 1.025| 6.218
RTD| 1.160| 1.369| 2.692| 0| 1.025| 6.218
RTD| 1.160| 1.366| 2.713| 0| 1.025| 6.218
RTD| 1.287| 1.364| 2.236| 0| 1.025| 6.218
RTD| 1.090| 1.374| 3.109| 0| 1.025| 6.218
RTD| 1.161| 1.368| 2.807| 0| 1.025| 6.218
RTD| 1.282| 1.360| 3.241| 0| 1.025| 6.218
RTD| 1.274| 1.356| 2.827| 0| 1.025| 6.218
RTD| 1.155| 1.353| 3.017| 0| 1.025| 6.218
RTD| 1.041| 1.367| 2.691| 0| 1.025| 6.218
RTD| 1.054| 1.376| 2.925| 0| 1.025| 6.218
RTD| 1.149| 1.369| 3.149| 0| 1.025| 6.218
RTD| 1.076| 1.375| 3.820| 0| 1.025| 6.218
RTD| 1.117| 1.369| 2.601| 0| 1.025| 6.218
RTD| 1.281| 1.369| 2.640| 0| 1.025| 6.218
RTD| 1.078| 1.364| 2.255| 0| 1.025| 6.218
RTD| 1.129| 1.366| 3.126| 0| 1.025| 6.218
RTT| 00:01:46 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.095| 1.376| 3.053| 0| 1.025| 6.218
RTD| 1.255| 1.366| 2.963| 0| 1.025| 6.218
RTD| 1.135| 1.380| 3.029| 0| 1.025| 6.218
RTD| 1.078| 1.367| 2.920| 0| 1.025| 6.218
RTD| 1.190| 1.371| 2.954| 0| 1.025| 6.218
RTD| 1.218| 1.369| 2.918| 0| 1.025| 6.218
RTD| 1.241| 1.376| 3.021| 0| 1.025| 6.218
RTD| 1.227| 1.368| 2.510| 0| 1.025| 6.218
RTD| 1.093| 1.374| 2.856| 0| 1.025| 6.218
RTD| 1.158| 1.371| 2.724| 0| 1.025| 6.218
RTD| 1.206| 1.377| 3.012| 0| 1.025| 6.218
RTD| 1.071| 1.375| 3.159| 0| 1.025| 6.218
RTD| 1.194| 1.369| 2.784| 0| 1.025| 6.218
RTD| 1.202| 1.372| 2.816| 0| 1.025| 6.218
RTD| 1.057| 1.368| 2.894| 0| 1.025| 6.218
RTD| 1.288| 1.364| 2.754| 0| 1.025| 6.218
RTD| 1.133| 1.376| 2.747| 0| 1.025| 6.218
RTD| 1.186| 1.385| 3.190| 0| 1.025| 6.218
RTD| 1.279| 1.369| 3.209| 0| 1.025| 6.218
RTD| 1.130| 1.369| 2.615| 0| 1.025| 6.218
RTD| 1.169| 1.371| 3.118| 0| 1.025| 6.218
RTT| 00:02:07 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.159| 1.371| 2.959| 0| 1.025| 6.218
RTD| 1.077| 1.371| 3.184| 0| 1.025| 6.218
RTD| 1.117| 1.373| 3.183| 0| 1.025| 6.218
RTD| 1.046| 1.384| 2.931| 0| 1.025| 6.218
RTD| 1.178| 1.369| 2.904| 0| 1.025| 6.218
RTD| 1.051| 1.364| 3.192| 0| 1.025| 6.218
RTD| 1.105| 1.381| 2.969| 0| 1.025| 6.218
RTD| 1.197| 1.370| 3.511| 0| 1.025| 6.218
RTD| 1.086| 1.367| 3.183| 0| 1.025| 6.218
RTD| 1.095| 1.364| 2.915| 0| 1.025| 6.218
RTD| 1.248| 1.369| 2.854| 0| 1.025| 6.218
RTD| 1.093| 1.370| 3.278| 0| 1.025| 6.218
RTD| 1.106| 1.402| 5.293| 0| 1.025| 6.218
RTD| 1.281| 1.363| 2.256| 0| 1.025| 6.218
RTD| 1.043| 1.374| 3.805| 0| 1.025| 6.218
RTD| 1.159| 1.365| 2.831| 0| 1.025| 6.218
RTD| 1.050| 1.429| 5.828| 0| 1.025| 6.218
RTD| 1.080| 1.366| 2.923| 0| 1.025| 6.218
RTD| 1.216| 1.365| 2.421| 0| 1.025| 6.218
RTD| 1.076| 1.372| 3.006| 0| 1.025| 6.218
RTD| 1.164| 1.364| 2.711| 0| 1.025| 6.218
RTT| 00:02:28 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.210| 1.370| 2.952| 0| 1.025| 6.218
RTD| 1.098| 1.368| 2.605| 0| 1.025| 6.218
RTD| 1.109| 1.380| 3.043| 0| 1.025| 6.218
RTD| 1.117| 1.383| 3.993| 0| 1.025| 6.218
RTD| 1.128| 1.367| 2.693| 0| 1.025| 6.218
RTD| 1.202| 1.376| 2.857| 0| 1.025| 6.218
RTD| 1.232| 1.375| 2.987| 0| 1.025| 6.218
RTD| 1.287| 1.362| 2.667| 0| 1.025| 6.218
RTD| 1.083| 1.378| 3.222| 0| 1.025| 6.218
RTD| 1.088| 1.373| 3.112| 0| 1.025| 6.218
RTD| 1.138| 1.377| 3.288| 0| 1.025| 6.218
RTD| 1.286| 1.365| 2.818| 0| 1.025| 6.218
RTD| 1.282| 1.369| 3.669| 0| 1.025| 6.218
RTD| 1.092| 1.377| 3.681| 0| 1.025| 6.218
RTD| 1.085| 1.363| 2.549| 0| 1.025| 6.218
RTD| 1.281| 1.365| 2.635| 0| 1.025| 6.218
RTD| 1.284| 1.361| 2.643| 0| 1.025| 6.218
RTD| 1.118| 1.366| 3.780| 0| 1.025| 6.218
RTD| 1.219| 1.373| 3.034| 0| 1.025| 6.218
RTD| 1.088| 1.375| 2.981| 0| 1.025| 6.218
RTD| 1.195| 1.380| 2.939| 0| 1.025| 6.218
RTT| 00:02:49 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.102| 1.386| 5.248| 0| 1.025| 6.218
RTD| 1.093| 1.376| 2.901| 0| 1.025| 6.218
RTD| 1.186| 1.370| 3.072| 0| 1.025| 6.218
RTD| 1.076| 1.381| 3.226| 0| 1.025| 6.218
RTD| 1.059| 1.371| 2.785| 0| 1.025| 6.218
RTD| 1.089| 1.364| 3.280| 0| 1.025| 6.218
RTD| 1.162| 1.369| 5.369| 0| 1.025| 6.218
RTD| 1.210| 1.370| 3.283| 0| 1.025| 6.218
RTD| 1.115| 1.366| 2.787| 0| 1.025| 6.218
RTD| 1.076| 1.370| 3.441| 0| 1.025| 6.218
RTD| 1.286| 1.362| 2.612| 0| 1.025| 6.218
RTD| 1.286| 1.364| 2.736| 0| 1.025| 6.218
RTD| 1.262| 1.363| 3.031| 0| 1.025| 6.218
RTD| 1.276| 1.367| 3.286| 0| 1.025| 6.218
RTD| 1.086| 1.385| 3.500| 0| 1.025| 6.218
RTD| 1.272| 1.370| 5.122| 0| 1.025| 6.218
RTD| 1.275| 1.362| 2.810| 0| 1.025| 6.218
RTD| 1.035| 1.361| 5.233| 0| 1.025| 6.218
RTD| 1.280| 1.364| 2.424| 0| 1.025| 6.218
RTD| 1.069| 1.360| 3.255| 0| 1.025| 6.218
RTD| 1.122| 1.367| 2.854| 0| 1.025| 6.218
RTT| 00:03:10 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.021| 1.398| 5.305| 0| 1.021| 6.218
RTD| 1.119| 1.362| 2.776| 0| 1.021| 6.218
RTD| 1.277| 1.357| 2.569| 0| 1.021| 6.218
RTD| 1.078| 1.361| 2.574| 0| 1.021| 6.218
RTD| 1.133| 1.358| 2.875| 0| 1.021| 6.218
RTD| 1.285| 1.361| 3.504| 0| 1.021| 6.218
RTD| 1.174| 1.365| 2.723| 0| 1.021| 6.218
RTD| 1.271| 1.361| 2.680| 0| 1.021| 6.218
RTD| 1.097| 1.364| 2.735| 0| 1.021| 6.218
RTD| 1.060| 1.360| 5.834| 0| 1.021| 6.218
RTD| 1.280| 1.358| 3.278| 0| 1.021| 6.218
RTD| 1.086| 1.391| 5.165| 0| 1.021| 6.218
RTD| 1.284| 1.367| 2.457| 0| 1.021| 6.218
RTD| 1.272| 1.360| 2.702| 0| 1.021| 6.218
RTD| 1.037| 1.376| 3.934| 0| 1.021| 6.218
RTD| 1.270| 1.359| 2.486| 0| 1.021| 6.218
RTD| 1.087| 1.366| 2.656| 0| 1.021| 6.218
RTD| 1.099| 1.381| 3.299| 0| 1.021| 6.218
RTD| 1.278| 1.360| 2.820| 0| 1.021| 6.218
RTD| 1.089| 1.359| 2.311| 0| 1.021| 6.218
RTD| 1.275| 1.356| 3.096| 0| 1.021| 6.218
RTT| 00:03:31 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.100| 1.359| 2.842| 0| 1.021| 6.218
RTD| 1.118| 1.358| 2.584| 0| 1.021| 6.218
RTD| 1.282| 1.360| 2.678| 0| 1.021| 6.218
RTD| 1.099| 1.362| 3.048| 0| 1.021| 6.218
RTD| 1.094| 1.354| 2.623| 0| 1.021| 6.218
RTD| 1.138| 1.366| 3.429| 0| 1.021| 6.218
RTD| 1.071| 1.368| 2.777| 0| 1.021| 6.218
RTD| 1.060| 1.393| 5.198| 0| 1.021| 6.218
RTD| 1.059| 1.370| 3.213| 0| 1.021| 6.218
RTD| 1.073| 1.371| 3.059| 0| 1.021| 6.218
RTD| 1.111| 1.363| 3.452| 0| 1.021| 6.218
RTD| 1.097| 1.370| 3.514| 0| 1.021| 6.218
RTD| 1.076| 1.398| 5.285| 0| 1.021| 6.218
RTD| 1.125| 1.369| 5.098| 0| 1.021| 6.218
RTD| 1.043| 1.361| 2.688| 0| 1.021| 6.218
RTD| 1.075| 1.423| 5.274| 0| 1.021| 6.218
RTD| 1.061| 1.366| 2.995| 0| 1.021| 6.218
RTD| 1.212| 1.365| 2.982| 0| 1.021| 6.218
RTD| 1.279| 1.359| 2.248| 0| 1.021| 6.218
RTD| 1.087| 1.370| 3.411| 0| 1.021| 6.218
RTD| 1.206| 1.370| 2.784| 0| 1.021| 6.218
RTT| 00:03:52 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.101| 1.387| 5.448| 0| 1.021| 6.218
RTD| 1.119| 1.362| 2.614| 0| 1.021| 6.218
RTD| 1.235| 1.377| 2.819| 0| 1.021| 6.218
RTD| 1.118| 1.374| 2.963| 0| 1.021| 6.218
RTD| 1.080| 1.354| 2.581| 0| 1.021| 6.218
RTD| 1.189| 1.367| 5.650| 0| 1.021| 6.218
RTD| 1.106| 1.381| 3.541| 0| 1.021| 6.218
RTD| 1.142| 1.365| 2.770| 0| 1.021| 6.218
RTD| 1.183| 1.359| 2.796| 0| 1.021| 6.218
RTD| 1.061| 1.366| 2.507| 0| 1.021| 6.218
RTD| 1.074| 1.367| 5.209| 0| 1.021| 6.218
RTD| 1.280| 1.359| 2.744| 0| 1.021| 6.218
RTD| 1.274| 1.362| 2.896| 0| 1.021| 6.218
RTD| 1.075| 1.370| 3.068| 0| 1.021| 6.218
RTD| 1.073| 1.369| 2.371| 0| 1.021| 6.218
RTD| 1.279| 1.361| 3.361| 0| 1.021| 6.218
RTD| 1.278| 1.361| 2.631| 0| 1.021| 6.218
RTD| 1.276| 1.358| 2.632| 0| 1.021| 6.218
RTD| 1.277| 1.358| 3.117| 0| 1.021| 6.218
RTD| 1.075| 1.358| 2.690| 0| 1.021| 6.218
RTD| 1.076| 1.363| 3.014| 0| 1.021| 6.218
RTT| 00:04:13 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.099| 1.364| 5.136| 0| 1.021| 6.218
RTD| 1.088| 1.353| 5.099| 0| 1.021| 6.218
RTD| 1.096| 1.371| 5.307| 0| 1.021| 6.218
RTD| 1.140| 1.368| 3.339| 0| 1.021| 6.218
RTD| 1.069| 1.365| 2.732| 0| 1.021| 6.218
RTD| 1.272| 1.356| 2.805| 0| 1.021| 6.218
RTD| 1.280| 1.363| 2.974| 0| 1.021| 6.218
RTD| 1.132| 1.361| 2.953| 0| 1.021| 6.218
RTD| 1.169| 1.366| 6.441| 0| 1.021| 6.441
RTD| 1.069| 1.355| 2.880| 0| 1.021| 6.441
RTD| 1.281| 1.357| 2.513| 0| 1.021| 6.441
RTD| 1.277| 1.355| 2.792| 0| 1.021| 6.441
RTD| 1.158| 1.360| 3.063| 0| 1.021| 6.441
RTD| 1.130| 1.369| 3.636| 0| 1.021| 6.441
RTD| 1.084| 1.357| 3.144| 0| 1.021| 6.441
RTD| 1.158| 1.372| 3.189| 0| 1.021| 6.441
RTD| 0.992| 1.376| 5.159| 0| 0.992| 6.441
RTD| 1.002| 1.386| 5.236| 0| 0.992| 6.441
RTD| 1.285| 1.359| 2.510| 0| 0.992| 6.441
RTD| 1.078| 1.361| 2.694| 0| 0.992| 6.441
RTD| 1.078| 1.365| 2.327| 0| 0.992| 6.441
RTT| 00:04:34 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.274| 1.359| 2.657| 0| 0.992| 6.441
RTD| 1.278| 1.359| 2.747| 0| 0.992| 6.441
RTD| 1.062| 1.355| 5.355| 0| 0.992| 6.441
RTD| 1.044| 1.388| 5.243| 0| 0.992| 6.441
RTD| 1.060| 1.360| 2.411| 0| 0.992| 6.441
RTD| 1.278| 1.359| 2.671| 0| 0.992| 6.441
RTD| 1.277| 1.360| 2.873| 0| 0.992| 6.441
RTD| 1.098| 1.354| 5.123| 0| 0.992| 6.441
RTD| 1.081| 1.366| 5.290| 0| 0.992| 6.441
RTD| 1.009| 1.414| 5.546| 0| 0.992| 6.441
RTD| 1.226| 1.361| 3.582| 0| 0.992| 6.441
RTD| 1.223| 1.358| 5.096| 0| 0.992| 6.441
RTD| 0.987| 1.411| 5.313| 0| 0.987| 6.441
RTD| 1.074| 1.383| 5.200| 0| 0.987| 6.441
RTD| 1.016| 1.344| 5.179| 0| 0.987| 6.441
RTD| 1.015| 1.440| 5.557| 0| 0.987| 6.441
RTD| 1.022| 1.364| 5.340| 0| 0.987| 6.441
RTD| 1.276| 1.354| 2.601| 0| 0.987| 6.441
RTD| 1.275| 1.349| 2.577| 0| 0.987| 6.441
RTD| 1.278| 1.355| 2.605| 0| 0.987| 6.441
RTD| 1.069| 1.352| 2.243| 0| 0.987| 6.441
RTT| 00:04:55 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.274| 1.354| 2.691| 0| 0.987| 6.441
RTD| 1.267| 1.350| 2.774| 0| 0.987| 6.441
RTD| 1.049| 1.348| 5.102| 0| 0.987| 6.441
RTD| 1.077| 1.388| 5.260| 0| 0.987| 6.441
RTD| 1.071| 1.359| 2.738| 0| 0.987| 6.441
RTD| 1.270| 1.351| 3.139| 0| 0.987| 6.441
RTD| 1.272| 1.353| 2.490| 0| 0.987| 6.441
RTD| 1.078| 1.354| 2.734| 0| 0.987| 6.441
RTD| 1.120| 1.407| 5.197| 0| 0.987| 6.441
RTD| 1.047| 1.377| 5.225| 0| 0.987| 6.441
RTD| 1.138| 1.345| 3.055| 0| 0.987| 6.441
RTD| 1.074| 1.359| 2.851| 0| 0.987| 6.441
RTD| 1.267| 1.353| 3.040| 0| 0.987| 6.441
RTD| 1.195| 1.357| 2.984| 0| 0.987| 6.441
RTD| 1.139| 1.343| 2.696| 0| 0.987| 6.441
RTD| 1.059| 1.351| 2.702| 0| 0.987| 6.441
RTD| 1.269| 1.352| 2.453| 0| 0.987| 6.441
RTD| 1.150| 1.364| 2.743| 0| 0.987| 6.441
RTD| 1.071| 1.352| 2.790| 0| 0.987| 6.441
RTD| 1.275| 1.349| 2.956| 0| 0.987| 6.441
RTD| 1.052| 1.346| 2.447| 0| 0.987| 6.441
RTT| 00:05:16 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.110| 1.364| 3.051| 0| 0.987| 6.441
RTD| 1.118| 1.374| 3.442| 0| 0.987| 6.441
RTD| 1.072| 1.377| 3.532| 0| 0.987| 6.441
RTD| 1.199| 1.371| 3.746| 0| 0.987| 6.441
RTD| 1.116| 1.360| 3.241| 0| 0.987| 6.441
RTD| 1.148| 1.369| 2.867| 0| 0.987| 6.441
RTD| 1.084| 1.383| 4.105| 0| 0.987| 6.441
RTD| 1.107| 1.366| 3.355| 0| 0.987| 6.441
RTD| 1.279| 1.357| 3.620| 0| 0.987| 6.441
RTD| 1.055| 1.356| 5.085| 0| 0.987| 6.441
RTD| 1.084| 1.344| 5.417| 0| 0.987| 6.441
RTD| 1.056| 1.341| 5.283| 0| 0.987| 6.441
RTD| 1.005| 1.336| 5.150| 0| 0.987| 6.441
RTD| 1.071| 1.354| 5.630| 0| 0.987| 6.441
RTD| 1.264| 1.346| 2.632| 0| 0.987| 6.441
RTD| 1.083| 1.371| 2.979| 0| 0.987| 6.441
RTD| 1.274| 1.350| 2.721| 0| 0.987| 6.441
RTD| 1.263| 1.351| 2.461| 0| 0.987| 6.441
RTD| 1.090| 1.366| 5.843| 0| 0.987| 6.441
RTD| 1.274| 1.352| 2.879| 0| 0.987| 6.441
RTD| 0.979| 1.467| 5.094| 0| 0.979| 6.441
RTT| 00:05:37 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 152.134| 189.214| 364.120| 12884| 0.962| 395.977
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 1:06 ` Paul
@ 2007-02-25 10:02 ` Jan Kiszka
2007-02-25 15:57 ` Paul
0 siblings, 1 reply; 13+ messages in thread
From: Jan Kiszka @ 2007-02-25 10:02 UTC (permalink / raw)
To: Paul; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 833 bytes --]
Paul wrote:
> Hi Philippe
>
> On Saturday 24 February 2007 17:17, Philippe Gerum wrote:
>>>> Ok, the latter looks clearly pathological. The trace should tell us
>>>> more.
>
>> Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
>> set
>
>
> Had to recompile without SMP (see attached config), so used the -03 ipipe
> patch with xenomai r2248. Started the latency test, and then fired up X (no
> WM) - At which point the latency went in to a zombie state with a massive
> hike in value. ipipe/trace/max, latency log, and dmesg outputs all attached.
>
Please grab trace/frozen instead, enable verbose mode, and increase
back_trace_points so that the reported latency is fully covered. See
http://www.xenomai.org/index.php/I-pipe:Tracer
for further instructions.
Thanks,
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 10:02 ` Jan Kiszka
@ 2007-02-25 15:57 ` Paul
2007-02-25 16:03 ` Jan Kiszka
2007-02-25 16:09 ` Gilles Chanteperdrix
0 siblings, 2 replies; 13+ messages in thread
From: Paul @ 2007-02-25 15:57 UTC (permalink / raw)
To: Jan Kiszka; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 742 bytes --]
On Sunday 25 February 2007 10:02, Jan Kiszka wrote:
> >> Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
> >> set
> Please grab trace/frozen instead, enable verbose mode, and increase
> back_trace_points so that the reported latency is fully covered. See
OK - Recompiled with the 1.04 patch for UP with the ipipe trace support. After
cutting Xorg's configs to a minimum (vesa driver, no Glx/dri support),
latency runs OK and reports some pretty horrible numbers when X starts (no
WM). Enabling the tracer, and starting/stopping X, the system either locks up
or latency goes in to a zombie state.
The attached trace logs provide little information - Also included dmesg and
kernel config.
Regards, Paul.
[-- Attachment #2: config-2.6.19.3-xenomai --]
[-- Type: text/plain, Size: 32991 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19.3
# Sun Feb 25 13:13:02 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-xenomai"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_SECURITY_ACCESS=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY=y
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_SYS_HEAPSZ=128
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_TIMERLAT=0
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0
#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set
#
# Shared interrupts
#
# CONFIG_XENO_OPT_SHIRQ_LEVEL is not set
# CONFIG_XENO_OPT_SHIRQ_EDGE is not set
#
# Machine
#
CONFIG_XENO_HW_FPU=y
#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
# CONFIG_XENO_HW_SMI_WORKAROUND is not set
#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=m
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=4096
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_SKIN_POSIX=m
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
CONFIG_XENO_SKIN_RTDM=m
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
#
# Drivers
#
#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set
#
# Testing drivers
#
CONFIG_XENO_DRIVERS_TIMERBENCH=m
CONFIG_XENO_DRIVERS_IRQBENCH=m
CONFIG_XENO_DRIVERS_SWITCHTEST=m
#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=m
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_IPIPE_DEBUG=y
CONFIG_IPIPE_TRACE=y
# CONFIG_IPIPE_TRACE_ENABLE is not set
# CONFIG_IPIPE_TRACE_MCOUNT is not set
CONFIG_IPIPE_TRACE_IRQSOFF=y
CONFIG_IPIPE_TRACE_SHIFT=14
CONFIG_IPIPE_TRACE_VMALLOC=y
CONFIG_IPIPE_TRACE_ENABLE_VALUE=0
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
[-- Attachment #3: dmesg --]
[-- Type: text/plain, Size: 17797 bytes --]
[ 0.000000] Linux version 2.6.19.3-xenomai (paul@domain.hid) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Sun Feb 25 13:17:29 GMT 2007
[ 0.000000] Command line: root=/dev/sda2 ro splash=silent vga=788
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130992) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa810
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0000
[ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x01000723 MSFT 0x00000097) @ 0x000000001ffc0040
[ 0.000000] ACPI: DSDT (v001 A0277 A0277001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130992) 1 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 130992
[ 0.000000] On node 0 totalpages: 130895
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1001 pages reserved
[ 0.000000] DMA zone: 2942 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1734 pages used for memmap
[ 0.000000] DMA32 zone: 125162 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] Built 1 zonelists. Total pages: 128104
[ 0.000000] Kernel command line: root=/dev/sda2 ro splash=silent vga=788
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 28.274663] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 28.274665] time.c: Detected 2403.091 MHz processor.
[ 28.274691] I-pipe 1.0-04: pipeline enabled.
[ 28.274732] Console: colour dummy device 80x25
[ 28.275195] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.275546] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 28.275599] Checking aperture...
[ 28.275604] CPU 0: aperture @ f0000000 size 64 MB
[ 28.282730] Memory: 504788k/523968k available (2046k kernel code, 18448k reserved, 1190k data, 180k init)
[ 28.360639] Calibrating delay using timer specific routine.. 4811.78 BogoMIPS (lpj=9623562)
[ 28.360679] Mount-cache hash table entries: 256
[ 28.360796] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.360799] CPU: L2 Cache: 512K (64 bytes/line)
[ 28.360809] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 28.360821] ACPI: Core revision 20060707
[ 28.403846] Using local APIC timer interrupts.
[ 28.445451] result 12516110
[ 28.445455] Detected 12.516 MHz APIC timer.
[ 28.448625] testing NMI watchdog ... OK.
[ 28.488738] checking if image is initramfs... it is
[ 28.921298] Freeing initrd memory: 6305k freed
[ 28.930641] NET: Registered protocol family 16
[ 28.930747] ACPI: bus type pci registered
[ 28.930756] PCI: Using configuration type 1
[ 28.935066] ACPI: Interpreter enabled
[ 28.935073] ACPI: Using IOAPIC for interrupt routing
[ 28.936016] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.936021] PCI: Probing PCI hardware (bus 00)
[ 28.938532] PCI: enabled onboard AC97/MC97 devices
[ 28.938724] Boot video device is 0000:01:00.0
[ 28.938757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.953322] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 28.953507] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 28.953688] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 28.953864] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
[ 28.954041] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 28.954220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 28.954398] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 28.954576] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 28.954668] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.954716] PCI: Using ACPI for IRQ routing
[ 28.954719] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 28.954731] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 28.954857] agpgart: Detected AGP bridge 0
[ 28.957453] agpgart: AGP aperture is 64M @ 0xf0000000
[ 28.957479] PCI-DMA: Disabling IOMMU.
[ 28.958014] pnp: the driver 'system' has been registered
[ 28.958201] PCI: Bridge: 0000:00:01.0
[ 28.958203] IO window: disabled.
[ 28.958208] MEM window: faf00000-fbffffff
[ 28.958212] PREFETCH window: f8000000-f9ffffff
[ 28.958227] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.958246] NET: Registered protocol family 2
[ 28.984529] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 28.984601] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 28.984694] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 28.984748] TCP: Hash tables configured (established 16384 bind 8192)
[ 28.984752] TCP reno registered
[ 28.985080] audit: initializing netlink socket (disabled)
[ 28.985089] audit(1172416784.676:1): initialized
[ 28.985126] I-pipe: Domain Xenomai registered.
[ 28.985131] Xenomai: hal/x86_64 started.
[ 28.986461] Xenomai: real-time nucleus v2.4-devel (Bells Of Lal) loaded.
[ 28.986575] VFS: Disk quotas dquot_6.5.1
[ 28.986596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 28.986659] io scheduler noop registered
[ 28.986662] io scheduler anticipatory registered
[ 28.986664] io scheduler deadline registered
[ 28.986670] io scheduler cfq registered (default)
[ 28.987375] vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20000300000, using 1875k, total 16384k
[ 28.987385] vesafb: mode is 800x600x16, linelength=1600, pages=3
[ 28.987387] vesafb: scrolling: redraw
[ 28.987390] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 29.009310] Console: switching to colour frame buffer device 100x37
[ 29.031377] fb0: VESA VGA frame buffer device
[ 29.033600] Linux agpgart interface v0.101 (c) Dave Jones
[ 29.033972] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.034597] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.035147] pnp: the driver 'serial' has been registered
[ 29.035637] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.036234] pnp: the driver 'i8042 kbd' has been registered
[ 29.036255] pnp: the driver 'i8042 aux' has been registered
[ 29.036297] pnp: the driver 'i8042 kbd' has been unregistered
[ 29.036314] pnp: the driver 'i8042 aux' has been unregistered
[ 29.036317] PNP: No PS/2 controller found. Probing ports directly.
[ 29.037100] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.037435] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.037908] mice: PS/2 mouse device common for all mice
[ 29.038320] TCP bic registered
[ 29.038528] NET: Registered protocol family 1
[ 29.038822] NET: Registered protocol family 17
[ 29.043191] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.047809] Freeing unused kernel memory: 180k freed
[ 29.067297] input: AT Translated Set 2 keyboard as /class/input/input0
[ 29.340599] SCSI subsystem initialized
[ 29.358678] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 29.365483] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 29.373809] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 29.381477] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 29.389629] VP_IDE: chipset revision 6
[ 29.397874] VP_IDE: not 100% native mode: will probe irqs later
[ 29.406527] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 29.415643] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 29.425174] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 29.434750] Probing IDE interface ide0...
[ 29.460202] libata version 2.00 loaded.
[ 29.848384] hda: HDT722525DLAT80, ATA DISK drive
[ 30.528429] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 30.538583] Probing IDE interface ide1...
[ 31.400027] hdc: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
[ 32.083143] ide1 at 0x170-0x177,0x376 on irq 15
[ 32.098765] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.110190] skge 1.9 addr 0xfa700000 irq 17 chip Yukon-Lite rev 9
[ 32.121825] skge eth0: addr 00:11:d8:e9:b5:fb
[ 32.134307] sata_via 0000:00:0f.0: version 2.0
[ 32.134323] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[ 32.145928] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 32.157560] ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 20
[ 32.169242] ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 20
[ 32.180707] scsi0 : sata_via
[ 32.198071] hda: max request size: 512KiB
[ 32.218399] hda: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(133)
[ 32.229904] hda: cache flushes supported
[ 32.241308] hda: hda1 hda2 hda3 hda4
[ 32.280923] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 32.292579] Uniform CD-ROM driver Revision: 3.20
[ 32.351725] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 32.523105] ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
[ 32.535358] ata1.00: ata1: dev 0 multi count 16
[ 32.565358] ata1.00: configured for UDMA/133
[ 32.577325] scsi1 : sata_via
[ 32.791624] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 32.814061] ATA: abnormal status 0x7F on port 0xC407
[ 32.826053] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 32.845949] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 32.858340] sda: Write Protect is off
[ 32.870517] sda: Mode Sense: 00 3a 00 00
[ 32.870531] SCSI device sda: drive cache: write back
[ 32.882621] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 32.894560] sda: Write Protect is off
[ 32.906241] sda: Mode Sense: 00 3a 00 00
[ 32.906252] SCSI device sda: drive cache: write back
[ 32.917906] sda: sda1 sda2 sda3
[ 32.940269] sd 0:0:0:0: Attached scsi disk sda
[ 33.334377] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 33.345552] EXT3-fs: write access will be enabled during recovery.
[ 34.006061] kjournald starting. Commit interval 5 seconds
[ 34.017089] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 34.028025] ext3_orphan_cleanup: deleting unreferenced inode 14598341
[ 34.037399] ext3_orphan_cleanup: deleting unreferenced inode 9474544
[ 34.055351] EXT3-fs: sda2: 2 orphan inodes deleted
[ 34.066046] EXT3-fs: recovery complete.
[ 34.085742] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.927413] pnp: the driver 'parport_pc' has been registered
[ 35.927763] parport0: PC-style at 0x378 [PCSPP]
[ 36.031262] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.041598] PCI parallel port detected: 9710:9805, I/O at 0xa800(0x9800)
[ 36.041631] parport1: PC-style at 0xa800 (0x9800) [PCSPP,TRISTATE]
[ 36.146957] PCI parallel port detected: 9710:9805, I/O at 0x8800(0x8400)
[ 36.146994] parport2: PC-style at 0x8800 (0x8400) [PCSPP,TRISTATE]
[ 36.286555] input: GenPS/2 Genius Mouse as /class/input/input1
[ 36.967917] Adding 530136k swap on /dev/hda2. Priority:-1 extents:1 across:530136k
[ 37.123722] EXT3 FS on sda2, internal journal
[ 37.459461] loop: loaded (max 8 devices)
[ 38.984629] kjournald starting. Commit interval 5 seconds
[ 38.998333] EXT3 FS on sda1, internal journal
[ 39.009435] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.055127] kjournald starting. Commit interval 5 seconds
[ 39.070316] EXT3 FS on sda3, internal journal
[ 39.081880] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.993761] NET: Registered protocol family 10
[ 40.005152] lo: Disabled Privacy Extensions
[ 40.350248] skge eth0: enabling interface
[ 40.365034] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.628022] skge eth0: Link is up at 10 Mbps, half duplex, flow control none
[ 42.639750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.853577] lp0: using parport0 (polling).
[ 52.865271] lp1: using parport1 (polling).
[ 52.877108] lp2: using parport2 (polling).
[ 52.896427] ppdev: user-space parallel port driver
[ 53.422910] eth0: no IPv6 routers present
[ 84.697337] Xenomai: starting native API services.
[ 84.734373] Xenomai: starting RTDM services.
[ 227.549876] Xenomai: stopping RTDM services.
[ 227.558197] Xenomai: stopping native API services.
[ 258.388140] Xenomai: starting native API services.
[ 258.415129] Xenomai: starting RTDM services.
[ 424.720869] NMI Watchdog detected LOCKUP on CPU 0
[ 424.721070] CPU 0
[ 424.721211] Modules linked in: xeno_timerbench xeno_rtdm xeno_native ppdev lp ipv6 loop tsdev serio_raw i2c_viapro psmouse i2c_core parport_pc parport evdev sd_mod ide_cd cdrom ide_disk pata_via ata_generic generic sata_via skge via82cxxx ide_core libata scsi_mod
[ 424.722974] Pid: 2943, comm: sampling-2941 Not tainted 2.6.19.3-xenomai #1
[ 424.723265] RIP: 0010:[<ffffffff802a47c4>] [<ffffffff802a47c4>] __ipipe_trace+0x104/0x390
[ 424.723785] RSP: 0018:ffff810019f0bd68 EFLAGS: 00000002
[ 424.724051] RAX: 000000edb3e1c485 RBX: ffffffff805a2100 RCX: 0000000080000000
[ 424.724368] RDX: 000000ed00000000 RSI: ffffffff802a2ff1 RDI: 0000000000000000
[ 424.724693] RBP: ffff810019f0bd98 R08: ffffffff802aad9e R09: 00002ad124d38e2e
[ 424.725006] R10: 0000000000000000 R11: 0000000000000206 R12: ffffc2000000d000
[ 424.725319] R13: ffffc2000002ea80 R14: 0000000000000002 R15: 0000000000000d75
[ 424.725654] FS: 0000000040021960(0063) GS:ffffffff8052a000(0000) knlGS:0000000000000000
[ 424.725998] CS: 0010 DS: 0000 ES: 0000 CR0: 00000000c005003b
[ 424.726271] CR2: 00002b88f7e517d0 CR3: 000000001914e000 CR4: 00000000000006e0
[ 424.726551] I-pipe domain Xenomai
[ 424.726703] Stack: 0000000000000092 ffffffff805a2100 0000000000000000 ffff810019f0be28
[ 424.727187] 0000000000000000 ffff81000cd60f50 ffff810019f0bda8 ffffffff802a4b27
[ 424.727634] ffff810019f0bdc8 ffffffff802a2ff1 ffff81000cd60f50 00000000ffffff92
[ 424.728041] Call Trace:
[ 424.728476] [<ffffffff802a4b27>] ipipe_trace_end+0x27/0x30
[ 424.728976] [<ffffffff802a2ff1>] __ipipe_restore_pipeline_head+0xb1/0xc0
[ 424.729480] [<ffffffff802aad9e>] xnpod_wait_thread_period+0x11e/0x140
[ 424.730311] [<ffffffff881324a0>] :xeno_native:rt_task_wait_period+0x30/0x40
[ 424.731221] [<ffffffff881359fc>] :xeno_native:__rt_task_wait_period+0x4c/0x90
[ 424.732514] [<ffffffff802b0dab>] hisyscall_event+0x1bb/0x300
[ 424.733038] [<ffffffff802a3347>] __ipipe_dispatch_event+0xc7/0x1b0
[ 424.733563] [<ffffffff8026cbfd>] __ipipe_syscall_root+0x8d/0x160
[ 424.734072] [<ffffffff8026035f>] __ipipe_syscall_root_thunk+0x35/0x3a
[ 424.734576] [<ffffffff8025a8f7>] system_call+0x57/0x9b
[ 424.734996] [<0000000040021138>]
[ 424.735147]
[ 424.735244]
[ 424.735308] Code: 48 8b 15 4d 25 23 00 48 8b 42 08 0f 18 08 48 81 fa 10 6d 4d
[ 424.736857] <6>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 424.741594] psmouse.c: resync failed, issuing reconnect request
[ 424.935246] input: GenPS/2 Genius Mouse as /class/input/input2
[-- Attachment #4: max --]
[-- Type: text/plain, Size: 1980 bytes --]
I-pipe worst-case tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Begin: 1020925143961 cycles, Trace Points: 2 (-10/+1), Length: 14313280 us
Calibrated minimum trace-point overhead: 0.039 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
| +*end 0x80000000 -108 10.446 __ipipe_restore_pipeline_head+0xb1 (xnpod_wait_thread_period+0x11e)
| +*begin 0x80000001 -98 8.129 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 -90 7.300 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| +*begin 0x000000f7 -83 9.213 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
| +*begin 0x80000000 -73 23.395 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*end 0x00000128 -50 7.475 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 -42 9.752 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x80000000 -33 14.786 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
| +*begin 0x80000001 -18 7.126 __ipipe_dispatch_event+0x32 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 -11 11.315 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
>| +*begin 0x80000000 0! 14313280.684 xnpod_wait_thread_period+0x3b (rt_task_wait_period+0x30 [xeno_native])
<| +end 0x80000001 14313280 17.336 __ipipe_global_path_unlock+0x4f (__ipipe_frozen_prtrace_start+0x66)
| +begin 0x80000000 14313298 0.000 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
[-- Attachment #5: frozen --]
[-- Type: text/plain, Size: 4556 bytes --]
I-pipe frozen back-tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Freeze: 1008772965433 cycles, Trace Points: 30 (+10)
Calibrated minimum trace-point overhead: 0.039 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
:| +end 0x80000000 -709 0.071 __ipipe_unstall_root+0x45 (__ipipe_restore_root+0x15)
:| +begin 0x80000000 -709 0.068 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
:| +end 0x80000000 -709! 401.869 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
:| #begin 0x000000f7 -307! 10.074 ipipe_trace_begin_thunk+0x35 (prepare_set+0x12)
:| #begin 0x80000000 -297! 15.910 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
:| #*[ 2943] -<?>- 99 -281! 18.891 xnpod_resume_thread+0x5a (xnthread_periodic_handler+0x28)
:| #*[ 2961] -<?>- -1 -262! 25.348 xnpod_schedule+0xa3 (xnintr_irq_handler+0x116)
:| #*[ 2943] -<?>- 99 -237! 12.903 xnpod_schedule+0x848 (xnpod_suspend_thread+0x151)
:| +*end 0x80000000 -224! 11.016 __ipipe_restore_pipeline_head+0xb1 (xnpod_wait_thread_period+0x11e)
:| +*begin 0x80000001 -213+ 8.294 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
:| +*end 0x80000001 -205+ 6.986 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
:| +*begin 0x80000000 -198! 11.820 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
:| +*begin 0x000000f7 -186+ 7.630 ipipe_trace_begin_thunk+0x35 (<2ad124b15520>)
:| +*begin 0x80000000 -178! 23.350 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
:| +*end 0x00000128 -155+ 7.285 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
:| +*end 0x80000000 -148! 13.742 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
:| +*begin 0x80000001 -134+ 8.704 __ipipe_dispatch_event+0x32 (__ipipe_syscall_root+0x8d)
:| +*end 0x80000001 -125! 14.357 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
:| +*begin 0x80000001 -111+ 8.189 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
:| +*end 0x80000001 -103+ 7.230 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
:| +*begin 0x000000f7 -95+ 9.363 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
:| +*begin 0x80000000 -86! 23.390 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
:| +*end 0x00000128 -63+ 7.300 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
:| +*end 0x80000000 -55+ 9.772 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
:| +*begin 0x80000000 -46! 12.694 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
:| +*begin 0x80000001 -33+ 6.956 __ipipe_dispatch_event+0x32 (__ipipe_syscall_root+0x8d)
:| +*end 0x80000001 -26! 10.546 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
:| +*begin 0x80000001 -15+ 9.293 __ipipe_global_path_lock+0x17 (ipipe_trace_frozen_reset+0xf)
:| +*end 0x80000001 -6+ 6.556 __ipipe_global_path_unlock+0x4f (ipipe_trace_frozen_reset+0x54)
< +*freeze 0x00088c05 0 6.561 xnshadow_sys_trace+0x8b (hisyscall_event+0x1bb)
| +*begin 0x000000f7 6 7.735 ipipe_trace_begin_thunk+0x35 (__ipipe_trace+0x379)
| +*begin 0x80000000 14 23.605 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*end 0x00000128 37 7.235 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 45 12.014 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x80000001 57 6.651 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 63 6.916 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| +*begin 0x80000000 70 12.159 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
| +*begin 0x80000001 82 7.161 __ipipe_dispatch_event+0x32 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 90 11.260 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
| +*begin 0x80000000 101 0.000 xnpod_wait_thread_period+0x3b (rt_task_wait_period+0x30 [xeno_native])
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 15:57 ` Paul
@ 2007-02-25 16:03 ` Jan Kiszka
2007-02-25 18:42 ` Paul
2007-02-25 16:09 ` Gilles Chanteperdrix
1 sibling, 1 reply; 13+ messages in thread
From: Jan Kiszka @ 2007-02-25 16:03 UTC (permalink / raw)
To: Paul; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 847 bytes --]
Paul wrote:
> On Sunday 25 February 2007 10:02, Jan Kiszka wrote:
>>>> Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
>>>> set
>
>> Please grab trace/frozen instead, enable verbose mode, and increase
>> back_trace_points so that the reported latency is fully covered. See
>
> OK - Recompiled with the 1.04 patch for UP with the ipipe trace support. After
> cutting Xorg's configs to a minimum (vesa driver, no Glx/dri support),
> latency runs OK and reports some pretty horrible numbers when X starts (no
> WM). Enabling the tracer, and starting/stopping X, the system either locks up
> or latency goes in to a zombie state.
>
> The attached trace logs provide little information - Also included dmesg and
> kernel config.
One more try please: we also need CONFIG_IPIPE_TRACE_MCOUNT.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 15:57 ` Paul
2007-02-25 16:03 ` Jan Kiszka
@ 2007-02-25 16:09 ` Gilles Chanteperdrix
1 sibling, 0 replies; 13+ messages in thread
From: Gilles Chanteperdrix @ 2007-02-25 16:09 UTC (permalink / raw)
To: Paul; +Cc: Jan Kiszka, xenomai
Paul wrote:
> On Sunday 25 February 2007 10:02, Jan Kiszka wrote:
> > >> Rather the CONFIG_IPIPE_TRACE feature, with the IRQs off tracking option
> > >> set
>
> > Please grab trace/frozen instead, enable verbose mode, and increase
> > back_trace_points so that the reported latency is fully covered. See
>
> OK - Recompiled with the 1.04 patch for UP with the ipipe trace support. After
> cutting Xorg's configs to a minimum (vesa driver, no Glx/dri
> support),
If you want to disable X acceleration, you should add :
Option "NoAccel"
in the "Device" section of your X configuration file.
> latency runs OK and reports some pretty horrible numbers when X starts (no
> WM). Enabling the tracer, and starting/stopping X, the system either locks up
> or latency goes in to a zombie state.
>
> The attached trace logs provide little information - Also included dmesg and
> kernel config.
--
Gilles Chanteperdrix.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 16:03 ` Jan Kiszka
@ 2007-02-25 18:42 ` Paul
2007-02-25 19:14 ` Jan Kiszka
2007-02-25 22:00 ` Philippe Gerum
0 siblings, 2 replies; 13+ messages in thread
From: Paul @ 2007-02-25 18:42 UTC (permalink / raw)
To: Jan Kiszka; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 651 bytes --]
On Sunday 25 February 2007 16:03, Jan Kiszka wrote:
> > The attached trace logs provide little information - Also included dmesg
>
> One more try please: we also need CONFIG_IPIPE_TRACE_MCOUNT.
With both CONFIG_IPIPE_TRACE_MCOUNT and CONFIG_IPIPE_TRACE_VMALLOC enabled,
the system auto-reboots as soon as the kernel starts to uncompress. Disabling
the latter restores normal service.
On Sunday 25 February 2007 16:09, Gilles Chanteperdrix wrote:
> Option "NoAccel"
Results are still the same - Latency goes to pot and hangs as soon as X starts
up. Quite likely the offending trace isn't getting logged..
Regards, Paul.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 16845 bytes --]
[ 0.000000] Linux version 2.6.19.3-xenomai (paul@domain.hid) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #7 Sun Feb 25 17:58:53 GMT 2007
[ 0.000000] Command line: root=/dev/sda2 ro splash=silent vga=788
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130992) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa810
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0000
[ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x01000723 MSFT 0x00000097) @ 0x000000001ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x01000723 MSFT 0x00000097) @ 0x000000001ffc0040
[ 0.000000] ACPI: DSDT (v001 A0277 A0277001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130992) 1 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 130992
[ 0.000000] On node 0 totalpages: 130895
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1700 pages reserved
[ 0.000000] DMA zone: 2243 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1734 pages used for memmap
[ 0.000000] DMA32 zone: 125162 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] Built 1 zonelists. Total pages: 127405
[ 0.000000] Kernel command line: root=/dev/sda2 ro splash=silent vga=788
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 28.777403] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 28.777410] time.c: Detected 2403.177 MHz processor.
[ 28.777485] I-pipe 1.0-04: pipeline enabled.
[ 28.777553] Console: colour dummy device 80x25
[ 28.778250] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.778657] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 28.778737] Checking aperture...
[ 28.778745] CPU 0: aperture @ f0000000 size 64 MB
[ 28.786774] Memory: 502760k/523968k available (2089k kernel code, 20568k reserved, 3940k data, 184k init)
[ 28.863385] Calibrating delay using timer specific routine.. 4817.66 BogoMIPS (lpj=9635322)
[ 28.863522] Mount-cache hash table entries: 256
[ 28.863751] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.863761] CPU: L2 Cache: 512K (64 bytes/line)
[ 28.863777] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 28.863800] ACPI: Core revision 20060707
[ 28.915014] Using local APIC timer interrupts.
[ 28.956635] result 12516560
[ 28.956645] Detected 12.516 MHz APIC timer.
[ 28.959360] testing NMI watchdog ... OK.
[ 28.999664] checking if image is initramfs... it is
[ 29.424500] Freeing initrd memory: 5630k freed
[ 29.431286] NET: Registered protocol family 16
[ 29.431474] ACPI: bus type pci registered
[ 29.431490] PCI: Using configuration type 1
[ 29.458905] ACPI: Interpreter enabled
[ 29.458927] ACPI: Using IOAPIC for interrupt routing
[ 29.464867] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.464892] PCI: Probing PCI hardware (bus 00)
[ 29.478789] PCI: enabled onboard AC97/MC97 devices
[ 29.479367] Boot video device is 0000:01:00.0
[ 29.479462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.578826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 29.580142] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 29.581349] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 29.582557] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
[ 29.583800] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 29.585019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 29.586239] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 29.587535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 29.588087] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.588202] PCI: Using ACPI for IRQ routing
[ 29.588210] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.588234] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 29.588613] agpgart: Detected AGP bridge 0
[ 29.591349] agpgart: AGP aperture is 64M @ 0xf0000000
[ 29.591404] PCI-DMA: Disabling IOMMU.
[ 29.594283] pnp: the driver 'system' has been registered
[ 29.595083] PCI: Bridge: 0000:00:01.0
[ 29.595098] IO window: disabled.
[ 29.595109] MEM window: faf00000-fbffffff
[ 29.595119] PREFETCH window: f8000000-f9ffffff
[ 29.595152] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.595285] NET: Registered protocol family 2
[ 29.635306] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 29.635505] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 29.635631] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 29.635700] TCP: Hash tables configured (established 16384 bind 8192)
[ 29.635709] TCP reno registered
[ 29.636782] audit: initializing netlink socket (disabled)
[ 29.636819] audit(1172427326.824:1): initialized
[ 29.636877] I-pipe: Domain Xenomai registered.
[ 29.636896] Xenomai: hal/x86_64 started.
[ 29.639998] Xenomai: real-time nucleus v2.4-devel (Bells Of Lal) loaded.
[ 29.640312] VFS: Disk quotas dquot_6.5.1
[ 29.640358] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 29.640548] io scheduler noop registered
[ 29.640558] io scheduler anticipatory registered
[ 29.640568] io scheduler deadline registered
[ 29.640598] io scheduler cfq registered (default)
[ 29.641853] vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20000080000, using 1875k, total 16384k
[ 29.641874] vesafb: mode is 800x600x16, linelength=1600, pages=3
[ 29.641882] vesafb: scrolling: redraw
[ 29.641890] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 29.664310] Console: switching to colour frame buffer device 100x37
[ 29.686434] fb0: VESA VGA frame buffer device
[ 29.694294] Linux agpgart interface v0.101 (c) Dave Jones
[ 29.694677] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.695401] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.696296] pnp: the driver 'serial' has been registered
[ 29.697960] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.698767] pnp: the driver 'i8042 kbd' has been registered
[ 29.698843] pnp: the driver 'i8042 aux' has been registered
[ 29.698988] pnp: the driver 'i8042 kbd' has been unregistered
[ 29.699057] pnp: the driver 'i8042 aux' has been unregistered
[ 29.699064] PNP: No PS/2 controller found. Probing ports directly.
[ 29.700229] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.700575] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.701281] mice: PS/2 mouse device common for all mice
[ 29.701859] TCP bic registered
[ 29.702080] NET: Registered protocol family 1
[ 29.702386] NET: Registered protocol family 17
[ 29.707511] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.712390] Freeing unused kernel memory: 184k freed
[ 29.732477] input: AT Translated Set 2 keyboard as /class/input/input0
[ 30.337843] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.345255] skge 1.9 addr 0xfa700000 irq 17 chip Yukon-Lite rev 9
[ 30.352793] skge eth0: addr 00:11:d8:e9:b5:fb
[ 30.449509] SCSI subsystem initialized
[ 30.485526] libata version 2.00 loaded.
[ 30.493279] sata_via 0000:00:0f.0: version 2.0
[ 30.493317] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[ 30.501613] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 30.510214] ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 20
[ 30.519228] ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 20
[ 30.528246] scsi0 : sata_via
[ 30.594634] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.604387] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.726952] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 30.894355] ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
[ 30.905301] ata1.00: ata1: dev 0 multi count 16
[ 30.935067] ata1.00: configured for UDMA/133
[ 30.946304] scsi1 : sata_via
[ 31.158851] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 31.181362] ATA: abnormal status 0x7F on port 0xC407
[ 31.193107] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 31.207479] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 31.219198] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 31.230978] VP_IDE: chipset revision 6
[ 31.242439] VP_IDE: not 100% native mode: will probe irqs later
[ 31.253966] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 31.265598] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 31.277623] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 31.289435] Probing IDE interface ide0...
[ 31.317834] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 31.329845] sda: Write Protect is off
[ 31.341705] sda: Mode Sense: 00 3a 00 00
[ 31.341775] SCSI device sda: drive cache: write back
[ 31.354040] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 31.366381] sda: Write Protect is off
[ 31.378548] sda: Mode Sense: 00 3a 00 00
[ 31.378877] SCSI device sda: drive cache: write back
[ 31.391082] sda: sda1 sda2 sda3
[ 31.410925] sd 0:0:0:0: Attached scsi disk sda
[ 31.654831] hda: HDT722525DLAT80, ATA DISK drive
[ 32.338916] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 32.351238] Probing IDE interface ide1...
[ 33.214472] hdc: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
[ 33.901638] ide1 at 0x170-0x177,0x376 on irq 15
[ 33.952960] hda: max request size: 512KiB
[ 33.988265] hda: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(133)
[ 34.000679] hda: cache flushes supported
[ 34.012703] hda: hda1 hda2 hda3 hda4
[ 34.044060] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 34.056104] Uniform CD-ROM driver Revision: 3.20
[ 34.897873] kjournald starting. Commit interval 5 seconds
[ 34.909134] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.511253] pnp: the driver 'parport_pc' has been registered
[ 37.512094] parport0: PC-style at 0x378 [PCSPP]
[ 37.618227] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.629165] PCI parallel port detected: 9710:9805, I/O at 0xa800(0x9800)
[ 37.629212] parport1: PC-style at 0xa800 (0x9800) [PCSPP,TRISTATE]
[ 37.728159] input: GenPS/2 Genius Mouse as /class/input/input1
[ 37.740252] PCI parallel port detected: 9710:9805, I/O at 0x8800(0x8400)
[ 37.740300] parport2: PC-style at 0x8800 (0x8400) [PCSPP,TRISTATE]
[ 38.763538] Adding 530136k swap on /dev/hda2. Priority:-1 extents:1 across:530136k
[ 38.939202] EXT3 FS on sda2, internal journal
[ 39.439813] loop: loaded (max 8 devices)
[ 39.786496] kjournald starting. Commit interval 5 seconds
[ 39.801019] EXT3 FS on sda1, internal journal
[ 39.812733] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.830088] kjournald starting. Commit interval 5 seconds
[ 39.845078] EXT3 FS on sda3, internal journal
[ 39.857119] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.771274] NET: Registered protocol family 10
[ 40.783840] lo: Disabled Privacy Extensions
[ 41.531911] skge eth0: enabling interface
[ 41.548883] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.811193] skge eth0: Link is up at 10 Mbps, half duplex, flow control none
[ 43.824030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.989631] eth0: no IPv6 routers present
[ 54.263359] lp0: using parport0 (polling).
[ 54.276942] lp1: using parport1 (polling).
[ 54.290669] lp2: using parport2 (polling).
[ 54.319744] ppdev: user-space parallel port driver
[ 129.969601] Xenomai: starting native API services.
[ 130.031160] Xenomai: starting RTDM services.
[ 185.878488] NMI Watchdog detected LOCKUP on CPU 0
[ 185.878940] CPU 0
[ 185.879303] Modules linked in: xeno_timerbench xeno_rtdm xeno_native ppdev lp ipv6 loop tsdev serio_raw i2c_viapro psmouse i2c_core parport_pc parport evdev ide_cd cdrom ide_disk pata_via ata_generic generic sd_mod via82cxxx ide_core sata_via libata scsi_mod skge
[ 185.883918] Pid: 2585, comm: sampling-2583 Not tainted 2.6.19.3-xenomai #7
[ 185.884532] RIP: 0010:[<ffffffff802581a5>] [<ffffffff802581a5>] __ipipe_trace+0x145/0x380
[ 185.885471] RSP: 0018:ffff81001af73d98 EFLAGS: 00000003
[ 185.886005] RAX: 0000000000001000 RBX: ffff81001af73f58 RCX: 000000000000000c
[ 185.886655] RDX: ffffffff804d3300 RSI: 0000000000000001 RDI: 0000000000000002
[ 185.887307] RBP: ffff81001af73dc8 R08: ffffffff8085d100 R09: 0000000000000001
[ 185.887956] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffff80621070
[ 185.888606] R13: ffffffff806b87a0 R14: 0000000000000000 R15: 0000000000003c93
[ 185.889284] FS: 0000000040021960(0063) GS:ffffffff807e4000(0000) knlGS:0000000000000000
[ 185.890002] CS: 0010 DS: 0000 ES: 0000 CR0: 00000000c005003b
[ 185.890564] CR2: 00002b2ac9b9e000 CR3: 000000001b0de000 CR4: 00000000000006e0
[ 185.891174] I-pipe domain Xenomai
[ 185.891528] Stack: 0000000000000292 ffff81001af73f58 0000000000000006 ffff81001b162280
[ 185.892714] 0000000058454e4f ffff81001ad60f50 ffff81001af73e48 ffffffff80216522
[ 185.893761] ffffffff88146ea0 0000000000000008 0000000000000038 ffff81001af73f58
[ 185.894707] Call Trace:
[ 185.895438] [<ffffffff80216522>] mcount+0x42/0x70
[ 186.101834] DWARF2 unwinder stuck at mcount+0x42/0x70
[ 186.102291]
[ 186.102545] Leftover inexact backtrace:
[ 186.102823]
[ 186.103826] [<ffffffff88137b79>] :xeno_native:__rt_task_wait_period+0x19/0x90
[ 186.104761] [<ffffffff80264b3b>] hisyscall_event+0x1bb/0x300
[ 186.105516] [<ffffffff80264980>] hisyscall_event+0x0/0x300
[ 186.106270] [<ffffffff80256c77>] __ipipe_dispatch_event+0xc7/0x1b0
[ 186.107257] [<ffffffff802162ed>] __ipipe_syscall_root+0x8d/0x160
[ 186.108018] [<ffffffff8040781f>] __ipipe_syscall_root_thunk+0x35/0x3a
[ 186.108950] [<ffffffff80209ac7>] system_call+0x57/0x9b
[ 186.109917]
[ 186.110152]
[ 186.110291] Code: 83 fe 04 74 16 48 8b 52 08 48 8b 42 08 0f 18 08 48 81 fa 10
[ 186.114827]
[-- Attachment #3: max --]
[-- Type: text/plain, Size: 2247 bytes --]
I-pipe worst-case tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Begin: 312405493468 cycles, Trace Points: 6 (-10/+1), Length: 4001 us
Calibrated minimum trace-point overhead: 0.037 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
| *+func -1 0.277 xnintr_init+0x9 (xnpod_enable_timesource+0x97)
| *+func -1 0.065 __ipipe_restore_pipeline_head+0x16 (xnpod_enable_timesource+0xbc)
| +end 0x80000000 -1 0.261 __ipipe_restore_pipeline_head+0xb1 (xnpod_enable_timesource+0xbc)
+func -1 0.300 rthal_timer_request+0xc (xnpod_enable_timesource+0xc8)
+func 0 0.078 rthal_irq_release+0x9 (rthal_timer_request+0x19)
+func 0 0.307 ipipe_virtualize_irq+0x21 (rthal_irq_release+0x31)
| +begin 0x80000001 0 0.272 ipipe_virtualize_irq+0xa1 (rthal_irq_release+0x31)
| +end 0x80000001 0 0.194 ipipe_virtualize_irq+0x1cc (rthal_irq_release+0x31)
+func 0 0.054 rthal_critical_enter+0x16 (rthal_timer_request+0x32)
+func 0 0.048 ipipe_critical_enter+0xe (rthal_critical_enter+0x1e)
>| +begin 0x80000001 0! 4000.752 ipipe_critical_enter+0x20 (rthal_critical_enter+0x1e)
:| +func 4000 0.059 rthal_irq_request+0x9 (rthal_timer_request+0xe0)
:| +func 4000 0.126 ipipe_virtualize_irq+0x21 (rthal_irq_request+0x3f)
:| +func 4000 0.060 rthal_critical_exit+0x9 (rthal_timer_request+0xe8)
:| +func 4000 0.043 ipipe_critical_exit+0xe (rthal_critical_exit+0x14)
<| +end 0x80000001 4001 0.200 ipipe_critical_exit+0x20 (rthal_critical_exit+0x14)
| +begin 0x000000ef 4001 0.000 ipipe_trace_begin_thunk+0x35 (ipipe_critical_exit+0x22)
[-- Attachment #4: frozen --]
[-- Type: text/plain, Size: 13026 bytes --]
I-pipe frozen back-tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Freeze: 434598593698 cycles, Trace Points: 30 (+100)
Calibrated minimum trace-point overhead: 0.037 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
:| +*func -244+ 6.981 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
:| +*func -238+ 6.956 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
:| +*func -231+ 7.615 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
:| #*func -223+ 6.951 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
:| #*func -216+ 7.210 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
:| #*func -209+ 6.806 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
:| #*func -202+ 8.189 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
:| #*func -194! 15.715 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
:| +*func -178+ 7.395 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
:| +*end 0x00000128 -171+ 7.640 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
:| +*end 0x80000000 -163! 10.317 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
:| +*begin 0x000000f7 -153+ 9.672 ipipe_trace_begin_thunk+0x35 (__ipipe_trace+0x364)
:| +*begin 0x80000000 -143+ 7.570 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
:| +*func -135+ 6.981 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
:| +*func -128+ 6.981 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
:| +*func -122+ 7.615 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
:| #*func -114+ 6.976 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
:| #*func -107+ 7.210 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
:| #*func -100+ 6.756 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
:| #*func -93+ 8.159 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
:| #*func -85! 15.995 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
:| +*func -69+ 7.310 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
:| +*end 0x00000128 -61+ 7.695 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
:| +*end 0x80000000 -54! 13.617 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
: +*func -40+ 7.240 xnshadow_sys_trace+0x16 (hisyscall_event+0x1bb)
: +*func -33+ 6.606 ipipe_trace_frozen_reset+0xa (xnshadow_sys_trace+0x8a)
: +*func -26+ 7.126 __ipipe_global_path_lock+0xa (ipipe_trace_frozen_reset+0x14)
:| +*begin 0x80000001 -19! 12.339 __ipipe_global_path_lock+0x1c (ipipe_trace_frozen_reset+0x14)
:| +*end 0x80000001 -7+ 7.360 __ipipe_global_path_unlock+0x62 (ipipe_trace_frozen_reset+0x61)
< +*freeze 0x002e883e 0 9.153 xnshadow_sys_trace+0x94 (hisyscall_event+0x1bb)
| +*begin 0x80000001 9 7.275 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 16 7.760 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| +*begin 0x000000f7 24 8.069 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
| +*begin 0x80000000 32 7.580 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 39 7.196 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 47 7.096 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 54 7.830 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 61 6.896 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 68 7.440 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 76 6.771 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 83 8.419 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 91 15.880 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 107 7.555 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 114 7.795 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 122 10.287 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x000000f7 133 8.029 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
| +*begin 0x80000000 141 7.590 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 148 7.196 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 155 7.091 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 162 7.830 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 170 6.851 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 177 7.440 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 185 6.771 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 191 8.424 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 200 15.920 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 216 7.545 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 223 7.815 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 231 10.287 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x000000f7 241 8.029 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
| +*begin 0x80000000 249 7.610 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 257 7.196 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 264 7.091 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 271 7.890 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 279 6.851 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 286 7.475 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 293 6.776 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 300 8.384 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 309 15.975 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 325 7.545 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 332 7.730 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 340 10.337 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x000000f7 350 8.029 ipipe_trace_begin_thunk+0x35 (__ipipe_dispatch_event+0x194)
| +*begin 0x80000000 358 7.615 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 366 7.196 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 373 7.041 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 380 7.870 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 388 6.851 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 395 7.390 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 402 6.826 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 409 8.384 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 417 16.289 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 434 7.555 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 441 7.715 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 449 10.262 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x80000000 459 11.181 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
+*func 470 7.385 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
+*func 478 6.806 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
| +*begin 0x80000001 485 7.410 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
| +*end 0x80000001 492 6.746 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
+*func 499 9.353 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
+*func 508 7.136 __rt_task_wait_period+0x19 [xeno_native] (hisyscall_event+0x1bb)
+*func 515 6.486 rt_task_wait_period+0x9 [xeno_native] (__rt_task_wait_period+0x4f [xeno_native])
| +*begin 0x000000f7 522 8.104 ipipe_trace_begin_thunk+0x35 (__ipipe_trace+0x364)
| +*begin 0x80000000 530 7.595 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 537 7.245 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 545 7.096 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 552 7.895 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 560 6.836 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 567 7.355 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 574 6.816 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 581 8.389 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 589 15.975 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 605 7.560 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 613 7.650 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 620 10.411 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x000000f7 631 8.099 ipipe_trace_begin_thunk+0x35 (__ipipe_trace+0x364)
| +*begin 0x80000000 639 7.555 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 646 7.220 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 654 7.081 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 661 7.880 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 669 6.896 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 675 7.395 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 683 6.836 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 690 8.384 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 698 15.940 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 714 7.610 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 722 7.650 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +*end 0x80000000 729 10.401 __ipipe_trace_irqs_on+0xe (__ipipe_trace_irqs_on_thunk+0x35)
| +*begin 0x000000f7 740 8.124 ipipe_trace_begin_thunk+0x35 (__ipipe_trace+0x364)
| +*begin 0x80000000 748 7.560 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +*func 755 7.225 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +*func 763 7.081 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +*func 770 7.845 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| #*func 777 6.901 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| #*func 784 7.340 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| #*func 792 6.786 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| #*func 798 8.474 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| #*func 807 15.950 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| +*func 823 7.990 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +*end 0x00000128 831 0.000 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 18:42 ` Paul
@ 2007-02-25 19:14 ` Jan Kiszka
2007-02-25 22:00 ` Philippe Gerum
1 sibling, 0 replies; 13+ messages in thread
From: Jan Kiszka @ 2007-02-25 19:14 UTC (permalink / raw)
To: Paul; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 2224 bytes --]
Paul wrote:
> On Sunday 25 February 2007 16:03, Jan Kiszka wrote:
>>> The attached trace logs provide little information - Also included dmesg
>> One more try please: we also need CONFIG_IPIPE_TRACE_MCOUNT.
>
> With both CONFIG_IPIPE_TRACE_MCOUNT and CONFIG_IPIPE_TRACE_VMALLOC enabled,
> the system auto-reboots as soon as the kernel starts to uncompress. Disabling
> the latter restores normal service.
Are we still tracing too early during boot? Probably worth a qemu/gdb
session.
>
> On Sunday 25 February 2007 16:09, Gilles Chanteperdrix wrote:
>> Option "NoAccel"
>
> Results are still the same - Latency goes to pot and hangs as soon as X starts
> up. Quite likely the offending trace isn't getting logged..
>
>
...
> ------------------------------------------------------------------------
>
> I-pipe frozen back-tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
> ------------------------------------------------------------
> Freeze: 434598593698 cycles, Trace Points: 30 (+100)
> Calibrated minimum trace-point overhead: 0.037 us
>
> +----- Hard IRQs ('|': locked)
> |+---- <unused>
> ||+--- <unused>
> |||+-- Xenomai
> ||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
> ||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
> ||||| | +- NMI noise ('N')
> ||||| | |
> Type User Val. Time Delay Function (Parent)
> :| +*func -244+ 6.981 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
> :| +*func -238+ 6.956 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
> :| +*func -231+ 7.615 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
> :| #*func -223+ 6.951 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
> :| #*func -216+ 7.210 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
Given these *huge* latencies for that simple functions, we are may face
some CPU frequency screw (though scaling is switched off?). Something
must disturb the tsc->ns conversion. Maybe this is actually no latency
real issue...
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 18:42 ` Paul
2007-02-25 19:14 ` Jan Kiszka
@ 2007-02-25 22:00 ` Philippe Gerum
2007-02-25 22:38 ` Paul
1 sibling, 1 reply; 13+ messages in thread
From: Philippe Gerum @ 2007-02-25 22:00 UTC (permalink / raw)
To: Paul; +Cc: Jan Kiszka, xenomai
On Sun, 2007-02-25 at 18:42 +0000, Paul wrote:
> Results are still the same - Latency goes to pot and hangs as soon as X starts
> up. Quite likely the offending trace isn't getting logged..
>
Just for the purpose of digging the issue further, does this particular
problem persist when MTRRs are switched off from the kernel config?
--
Philippe.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Xenomai-core] x86_64 - Initial results.
2007-02-25 22:00 ` Philippe Gerum
@ 2007-02-25 22:38 ` Paul
0 siblings, 0 replies; 13+ messages in thread
From: Paul @ 2007-02-25 22:38 UTC (permalink / raw)
To: rpm; +Cc: Jan Kiszka, xenomai
[-- Attachment #1: Type: text/plain, Size: 588 bytes --]
Hi Philippe
On Sunday 25 February 2007 22:00, Philippe Gerum wrote:
> > Results are still the same - Latency goes to pot and hangs as soon as X
> > starts up. Quite likely the offending trace isn't getting logged..
>
> Just for the purpose of digging the issue further, does this particular
> problem persist when MTRRs are switched off from the kernel config?
I'd just finished compiling yet another kernel with CONFIG_MTRR disabled and
was about to run another test..
Logs attached - Even with ipipe-trace enabled, latencies are acceptable when
firing up X/KDE..
Regards, Paul.
[-- Attachment #2: frozen --]
[-- Type: text/plain, Size: 13251 bytes --]
I-pipe frozen back-tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Freeze: 970774923862 cycles, Trace Points: 30 (+100)
Calibrated minimum trace-point overhead: 0.037 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
:| # func -3 0.067 xnpod_schedule+0x16 (xnintr_irq_handler+0x116)
:| # [ 3008] Xorg -1 -3 0.231 xnpod_schedule+0xa8 (xnintr_irq_handler+0x116)
:| # func -2 0.343 __switch_to+0x16 (xnpod_schedule+0x80b)
:| # [ 2716] samplin 99 -2 0.134 xnpod_schedule+0x848 (xnpod_suspend_thread+0x154)
:| # func -2 0.065 __ipipe_restore_pipeline_head+0x16 (xnpod_wait_thread_period+0x11e)
:| + end 0x80000000 -2 0.163 __ipipe_restore_pipeline_head+0xb1 (xnpod_wait_thread_period+0x11e)
:| + begin 0x80000001 -2 0.073 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
:| + end 0x80000001 -2 0.088 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
:| + begin 0x80000000 -2 0.326 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
: + func -1 0.076 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
: + func -1 0.071 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
:| + begin 0x80000001 -1 0.048 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
:| + end 0x80000001 -1 0.070 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
: + func -1 0.098 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
: + func -1 0.077 __rt_timer_tsc2ns+0xe [xeno_native] (hisyscall_event+0x1bb)
: + func -1 0.144 rt_timer_tsc2ns+0x9 [xeno_native] (__rt_timer_tsc2ns+0x2c [xeno_native])
:| + begin 0x80000001 -1 0.072 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
:| + end 0x80000001 -1 0.078 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
:| + begin 0x80000000 0 0.139 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
: + func 0 0.063 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
: + func 0 0.064 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
:| + begin 0x80000001 0 0.056 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
:| + end 0x80000001 0 0.061 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
: + func 0 0.151 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
: + func 0 0.059 xnshadow_sys_trace+0x16 (hisyscall_event+0x1bb)
: + func 0 0.127 ipipe_trace_frozen_reset+0xa (xnshadow_sys_trace+0x8a)
: + func 0 0.051 __ipipe_global_path_lock+0xa (ipipe_trace_frozen_reset+0x14)
:| + begin 0x80000001 0 0.120 __ipipe_global_path_lock+0x1c (ipipe_trace_frozen_reset+0x14)
:| + end 0x80000001 0 0.066 __ipipe_global_path_unlock+0x62 (ipipe_trace_frozen_reset+0x61)
< + freeze 0x0000543e 0 0.084 xnshadow_sys_trace+0x94 (hisyscall_event+0x1bb)
| + begin 0x80000001 0 0.062 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 0 0.083 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| + begin 0x80000000 0 0.131 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
+ func 0 0.066 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
+ func 0 0.064 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
| + begin 0x80000001 0 0.057 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 0 0.071 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
+ func 0 0.083 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
+ func 0 0.048 __rt_task_wait_period+0x19 [xeno_native] (hisyscall_event+0x1bb)
+ func 0 0.052 rt_task_wait_period+0x9 [xeno_native] (__rt_task_wait_period+0x4f [xeno_native])
+ func 0 0.047 xnpod_wait_thread_period+0x20 (rt_task_wait_period+0x35 [xeno_native])
| + begin 0x80000000 0 0.062 xnpod_wait_thread_period+0x40 (rt_task_wait_period+0x35 [xeno_native])
| # func 0 0.076 xnpod_suspend_thread+0x21 (xnpod_wait_thread_period+0x99)
| # func 0 0.069 xnpod_schedule+0x16 (xnpod_suspend_thread+0x154)
| # [ 2716] samplin 99 1 0.367 xnpod_schedule+0xa8 (xnpod_suspend_thread+0x154)
| # func 1 0.267 __switch_to+0x16 (xnpod_schedule+0x80b)
| # [ 3008] Xorg -1 1 0.231 xnpod_schedule+0x848 (xnintr_irq_handler+0x116)
| +func 1 0.084 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +end 0x00000128 2 0.073 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +begin 0x80000000 2 79.580 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +begin 0x000000f7 81 0.071 ipipe_trace_begin_thunk+0x35 (__memcpy_fromio+0x12)
| +begin 0x80000000 81 0.049 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +func 81 0.066 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +func 81 0.070 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +func 81 0.058 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| # func 81 0.051 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| # func 82 0.057 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| # func 82 0.060 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| # func 82 0.065 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| # func 82 0.064 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| # func 82 0.052 xnpod_resume_thread+0x10 (xnthread_periodic_handler+0x2d)
| # [ 2716] samplin 99 82 0.188 xnpod_resume_thread+0x5f (xnthread_periodic_handler+0x2d)
| # func 82 0.068 xnpod_schedule+0x16 (xnintr_irq_handler+0x116)
| # [ 3008] Xorg -1 82 0.233 xnpod_schedule+0xa8 (xnintr_irq_handler+0x116)
| # func 82 0.286 __switch_to+0x16 (xnpod_schedule+0x80b)
| # [ 2716] samplin 99 83 0.152 xnpod_schedule+0x848 (xnpod_suspend_thread+0x154)
| # func 83 0.055 __ipipe_restore_pipeline_head+0x16 (xnpod_wait_thread_period+0x11e)
| + end 0x80000000 83 0.161 __ipipe_restore_pipeline_head+0xb1 (xnpod_wait_thread_period+0x11e)
| + begin 0x80000001 83 0.066 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 83 0.074 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| + begin 0x80000000 83 0.293 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
+ func 83 0.066 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
+ func 83 0.059 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
| + begin 0x80000001 84 0.069 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 84 0.065 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
+ func 84 0.078 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
+ func 84 0.052 __rt_task_wait_period+0x19 [xeno_native] (hisyscall_event+0x1bb)
+ func 84 0.048 rt_task_wait_period+0x9 [xeno_native] (__rt_task_wait_period+0x4f [xeno_native])
+ func 84 0.048 xnpod_wait_thread_period+0x20 (rt_task_wait_period+0x35 [xeno_native])
| + begin 0x80000000 84 0.063 xnpod_wait_thread_period+0x40 (rt_task_wait_period+0x35 [xeno_native])
| # func 84 0.057 xnpod_suspend_thread+0x21 (xnpod_wait_thread_period+0x99)
| # func 84 0.065 xnpod_schedule+0x16 (xnpod_suspend_thread+0x154)
| # [ 2716] samplin 99 84 0.218 xnpod_schedule+0xa8 (xnpod_suspend_thread+0x154)
| # func 84 0.247 __switch_to+0x16 (xnpod_schedule+0x80b)
| # [ 3008] Xorg -1 85 0.222 xnpod_schedule+0x848 (xnintr_irq_handler+0x116)
| +func 85 0.062 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +end 0x00000128 85 0.073 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +begin 0x80000000 85 92.741 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +begin 0x000000f7 178 0.059 ipipe_trace_begin_thunk+0x35 (__memcpy_fromio+0x12)
| +begin 0x80000000 178 0.054 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +func 178 0.066 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +func 178 0.070 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
| +func 178 0.061 __ipipe_dispatch_wired+0xc (__ipipe_handle_irq+0x91)
| # func 178 0.047 xnintr_clock_handler+0x9 (__ipipe_dispatch_wired+0x94)
| # func 178 0.057 xnintr_irq_handler+0x21 (xnintr_clock_handler+0x1b)
| # func 178 0.059 xnpod_announce_tick+0x9 (xnintr_irq_handler+0x53)
| # func 178 0.059 xntimer_tick_aperiodic+0x12 (xnpod_announce_tick+0xe)
| # func 178 0.069 xnthread_periodic_handler+0x9 (xntimer_tick_aperiodic+0x88)
| # func 178 0.051 xnpod_resume_thread+0x10 (xnthread_periodic_handler+0x2d)
| # [ 2716] samplin 99 178 0.188 xnpod_resume_thread+0x5f (xnthread_periodic_handler+0x2d)
| # func 179 0.072 xnpod_schedule+0x16 (xnintr_irq_handler+0x116)
| # [ 3008] Xorg -1 179 0.228 xnpod_schedule+0xa8 (xnintr_irq_handler+0x116)
| # func 179 0.310 __switch_to+0x16 (xnpod_schedule+0x80b)
| # [ 2716] samplin 99 179 0.153 xnpod_schedule+0x848 (xnpod_suspend_thread+0x154)
| # func 179 0.052 __ipipe_restore_pipeline_head+0x16 (xnpod_wait_thread_period+0x11e)
| + end 0x80000000 179 0.167 __ipipe_restore_pipeline_head+0xb1 (xnpod_wait_thread_period+0x11e)
| + begin 0x80000001 179 0.065 __ipipe_dispatch_event+0xe9 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 180 0.074 __ipipe_dispatch_event+0x191 (__ipipe_syscall_root+0x8d)
| + begin 0x80000000 180 0.298 __ipipe_syscall_root+0x14b (__ipipe_syscall_root_thunk+0x35)
+ func 180 0.063 __ipipe_syscall_root+0xc (__ipipe_syscall_root_thunk+0x35)
+ func 180 0.060 __ipipe_dispatch_event+0x16 (__ipipe_syscall_root+0x8d)
| + begin 0x80000001 180 0.069 __ipipe_dispatch_event+0x37 (__ipipe_syscall_root+0x8d)
| + end 0x80000001 180 0.061 __ipipe_dispatch_event+0xb6 (__ipipe_syscall_root+0x8d)
+ func 180 0.084 hisyscall_event+0x21 (__ipipe_dispatch_event+0xc7)
+ func 180 0.052 __rt_task_wait_period+0x19 [xeno_native] (hisyscall_event+0x1bb)
+ func 180 0.047 rt_task_wait_period+0x9 [xeno_native] (__rt_task_wait_period+0x4f [xeno_native])
+ func 180 0.052 xnpod_wait_thread_period+0x20 (rt_task_wait_period+0x35 [xeno_native])
| + begin 0x80000000 180 0.059 xnpod_wait_thread_period+0x40 (rt_task_wait_period+0x35 [xeno_native])
| # func 180 0.057 xnpod_suspend_thread+0x21 (xnpod_wait_thread_period+0x99)
| # func 181 0.068 xnpod_schedule+0x16 (xnpod_suspend_thread+0x154)
| # [ 2716] samplin 99 181 0.221 xnpod_schedule+0xa8 (xnpod_suspend_thread+0x154)
| # func 181 0.234 __switch_to+0x16 (xnpod_schedule+0x80b)
| # [ 3008] Xorg -1 181 0.235 xnpod_schedule+0x848 (xnintr_irq_handler+0x116)
| +func 181 0.062 __ipipe_walk_pipeline+0x10 (__ipipe_handle_irq+0x1d2)
| +end 0x00000128 181 0.072 __ipipe_handle_irq+0x1da (common_interrupt+0x78)
| +begin 0x80000000 181 105.875 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +begin 0x000000f7 287 0.059 ipipe_trace_begin_thunk+0x35 (__memcpy_fromio+0x12)
| +begin 0x80000000 287 0.114 __ipipe_trace_irqs_off+0xe (__ipipe_trace_irqs_off_thunk+0x35)
| +func 287 0.062 __ipipe_handle_irq+0x21 (common_interrupt+0x78)
| +func 288 0.000 __ipipe_ack_apic+0x9 (__ipipe_handle_irq+0x87)
[-- Attachment #3: latency.log --]
[-- Type: text/x-log, Size: 26944 bytes --]
*
*
* Type ^C to stop this application.
*
*
== Sampling period: 100 us
== Test mode: periodic user-mode task
== All results in microseconds
warming up...
RTT| 00:00:01 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 2.015| 2.141| 3.223| 0| 2.015| 3.223
RTD| 1.942| 2.163| 6.166| 0| 1.942| 6.166
RTD| 1.848| 2.059| 5.935| 0| 1.848| 6.166
RTD| 1.899| 2.137| 5.901| 0| 1.848| 6.166
RTD| 1.937| 2.085| 5.990| 0| 1.848| 6.166
RTD| 1.924| 2.100| 5.822| 0| 1.848| 6.166
RTD| 1.875| 2.106| 6.086| 0| 1.848| 6.166
RTD| 1.812| 2.101| 3.423| 0| 1.812| 6.166
RTD| 1.842| 2.056| 3.969| 0| 1.812| 6.166
RTD| 1.877| 2.124| 3.717| 0| 1.812| 6.166
RTD| 1.925| 2.087| 3.004| 0| 1.812| 6.166
RTD| 1.698| 2.153| 3.455| 0| 1.698| 6.166
RTD| 1.916| 2.054| 3.091| 0| 1.698| 6.166
RTD| 1.834| 2.114| 3.277| 0| 1.698| 6.166
RTD| 1.862| 2.076| 3.120| 0| 1.698| 6.166
RTD| 1.919| 2.108| 2.633| 0| 1.698| 6.166
RTD| 1.756| 2.083| 2.950| 0| 1.698| 6.166
RTD| 1.927| 2.077| 2.901| 0| 1.698| 6.166
RTD| 1.788| 2.051| 3.148| 0| 1.698| 6.166
RTD| 1.927| 2.091| 7.752| 0| 1.698| 7.752
RTD| 1.744| 2.053| 3.045| 0| 1.698| 7.752
RTT| 00:00:22 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.916| 2.114| 4.340| 0| 1.698| 7.752
RTD| 1.768| 2.203| 3.566| 0| 1.698| 7.752
RTD| 1.801| 2.215| 6.171| 0| 1.698| 7.752
RTD| 1.823| 2.075| 3.254| 0| 1.698| 7.752
RTD| 1.931| 2.082| 7.030| 0| 1.698| 7.752
RTD| 1.920| 2.075| 3.191| 0| 1.698| 7.752
RTD| 1.919| 2.078| 5.899| 0| 1.698| 7.752
RTD| 1.902| 2.071| 2.736| 0| 1.698| 7.752
RTD| 1.766| 2.064| 6.381| 0| 1.698| 7.752
RTD| 1.893| 2.072| 2.978| 0| 1.698| 7.752
RTD| 1.924| 2.075| 3.174| 0| 1.698| 7.752
RTD| 1.916| 2.067| 3.130| 0| 1.698| 7.752
RTD| 1.913| 2.063| 3.229| 0| 1.698| 7.752
RTD| 1.774| 2.068| 6.941| 0| 1.698| 7.752
RTD| 1.814| 2.074| 6.614| 0| 1.698| 7.752
RTD| 1.921| 2.076| 5.925| 0| 1.698| 7.752
RTD| 1.682| 2.073| 3.331| 0| 1.682| 7.752
RTD| 1.922| 2.079| 3.648| 0| 1.682| 7.752
RTD| 1.808| 2.063| 3.492| 0| 1.682| 7.752
RTD| 1.802| 2.043| 3.495| 0| 1.682| 7.752
RTD| 1.909| 2.050| 3.232| 0| 1.682| 7.752
RTT| 00:00:43 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.676| 2.058| 8.308| 0| 1.676| 8.308
RTD| 1.919| 2.072| 3.004| 0| 1.676| 8.308
RTD| 1.712| 2.058| 3.034| 0| 1.676| 8.308
RTD| 1.803| 2.084| 3.140| 0| 1.676| 8.308
RTD| 1.903| 2.073| 2.878| 0| 1.676| 8.308
RTD| 1.912| 2.055| 6.437| 0| 1.676| 8.308
RTD| 1.922| 2.053| 3.610| 0| 1.676| 8.308
RTD| 1.617| 2.280| 6.609| 0| 1.617| 8.308
RTD| 1.713| 2.062| 3.261| 0| 1.617| 8.308
RTD| 1.682| 2.204| 4.791| 0| 1.617| 8.308
RTD| 1.625| 2.058| 3.502| 0| 1.617| 8.308
RTD| 1.631| 2.124| 4.134| 0| 1.617| 8.308
RTD| 1.599| 2.107| 4.538| 0| 1.599| 8.308
RTD| 1.633| 2.101| 4.716| 0| 1.599| 8.308
RTD| 1.621| 2.193| 5.189| 0| 1.599| 8.308
RTD| 1.606| 2.155| 4.737| 0| 1.599| 8.308
RTD| 1.679| 2.305| 6.208| 0| 1.599| 8.308
RTD| 1.623| 2.168| 5.856| 0| 1.599| 8.308
RTD| 1.670| 2.207| 5.904| 0| 1.599| 8.308
RTD| 1.636| 2.157| 5.905| 0| 1.599| 8.308
RTD| 1.623| 2.222| 5.900| 0| 1.599| 8.308
RTT| 00:01:04 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.609| 2.172| 5.915| 0| 1.599| 8.308
RTD| 1.713| 2.374| 5.917| 0| 1.599| 8.308
RTD| 1.666| 2.356| 5.992| 0| 1.599| 8.308
RTD| 1.612| 2.311| 5.906| 0| 1.599| 8.308
RTD| 1.687| 2.365| 5.923| 0| 1.599| 8.308
RTD| 1.761| 2.490| 7.308| 0| 1.599| 8.308
RTD| 1.694| 2.430| 5.816| 0| 1.599| 8.308
RTD| 1.696| 2.326| 5.771| 0| 1.599| 8.308
RTD| 1.644| 2.417| 5.791| 0| 1.599| 8.308
RTD| 1.691| 2.468| 5.977| 0| 1.599| 8.308
RTD| 1.570| 2.212| 5.866| 0| 1.570| 8.308
RTD| 1.599| 2.186| 5.820| 0| 1.570| 8.308
RTD| 1.577| 2.211| 5.844| 0| 1.570| 8.308
RTD| 1.665| 2.436| 4.977| 0| 1.570| 8.308
RTD| 1.601| 2.428| 4.898| 0| 1.570| 8.308
RTD| 1.678| 2.559| 5.656| 0| 1.570| 8.308
RTD| 1.672| 2.438| 6.141| 0| 1.570| 8.308
RTD| 1.719| 2.099| 6.009| 0| 1.570| 8.308
RTD| 1.876| 2.030| 3.197| 0| 1.570| 8.308
RTD| 1.876| 2.060| 4.906| 0| 1.570| 8.308
RTD| 1.873| 2.041| 3.078| 0| 1.570| 8.308
RTT| 00:01:25 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.667| 2.026| 3.791| 0| 1.570| 8.308
RTD| 1.671| 2.051| 3.725| 0| 1.570| 8.308
RTD| 1.868| 2.043| 3.510| 0| 1.570| 8.308
RTD| 1.881| 2.043| 3.365| 0| 1.570| 8.308
RTD| 1.867| 2.059| 5.233| 0| 1.570| 8.308
RTD| 1.862| 2.048| 3.453| 0| 1.570| 8.308
RTD| 1.754| 2.030| 3.919| 0| 1.570| 8.308
RTD| 1.875| 2.056| 4.476| 0| 1.570| 8.308
RTD| 1.869| 2.035| 3.290| 0| 1.570| 8.308
RTD| 1.872| 2.050| 3.589| 0| 1.570| 8.308
RTD| 1.865| 2.044| 2.553| 0| 1.570| 8.308
RTD| 1.736| 2.067| 3.365| 0| 1.570| 8.308
RTD| 1.743| 2.010| 3.538| 0| 1.570| 8.308
RTD| 1.876| 2.048| 3.787| 0| 1.570| 8.308
RTD| 1.868| 2.013| 3.321| 0| 1.570| 8.308
RTD| 1.875| 2.058| 3.872| 0| 1.570| 8.308
RTD| 1.724| 2.085| 4.367| 0| 1.570| 8.308
RTD| 1.763| 2.060| 6.154| 0| 1.570| 8.308
RTD| 1.876| 2.055| 3.211| 0| 1.570| 8.308
RTD| 1.871| 2.056| 3.011| 0| 1.570| 8.308
RTD| 1.865| 2.036| 4.059| 0| 1.570| 8.308
RTT| 00:01:46 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.797| 2.082| 3.794| 0| 1.570| 8.308
RTD| 1.822| 2.043| 3.135| 0| 1.570| 8.308
RTD| 1.857| 2.055| 3.136| 0| 1.570| 8.308
RTD| 1.872| 2.056| 3.230| 0| 1.570| 8.308
RTD| 1.871| 2.067| 2.873| 0| 1.570| 8.308
RTD| 1.731| 2.021| 3.684| 0| 1.570| 8.308
RTD| 1.759| 2.041| 3.558| 0| 1.570| 8.308
RTD| 1.753| 2.072| 4.259| 0| 1.570| 8.308
RTD| 1.863| 2.036| 2.929| 0| 1.570| 8.308
RTD| 1.818| 2.028| 6.158| 0| 1.570| 8.308
RTD| 1.730| 2.177| 6.150| 0| 1.570| 8.308
RTD| 1.626| 2.284| 6.654| 0| 1.570| 8.308
RTD| 1.709| 3.281| 21.566| 0| 1.570| 21.566
RTD| 1.692| 2.110| 4.207| 0| 1.570| 21.566
RTD| 1.724| 1.983| 3.821| 0| 1.570| 21.566
RTD| 1.738| 2.404| 4.199| 0| 1.570| 21.566
RTD| 1.691| 2.078| 7.196| 0| 1.570| 21.566
RTD| 1.679| 2.313| 11.929| 0| 1.570| 21.566
RTD| 1.727| 2.404| 4.928| 0| 1.570| 21.566
RTD| 1.674| 2.357| 5.103| 0| 1.570| 21.566
RTD| 1.795| 3.956| 12.373| 0| 1.570| 21.566
RTT| 00:02:07 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.755| 2.777| 12.352| 0| 1.570| 21.566
RTD| 1.727| 2.562| 6.069| 0| 1.570| 21.566
RTD| 1.768| 2.395| 4.747| 0| 1.570| 21.566
RTD| 1.753| 2.409| 6.043| 0| 1.570| 21.566
RTD| 1.774| 2.451| 5.765| 0| 1.570| 21.566
RTD| 1.739| 2.449| 5.907| 0| 1.570| 21.566
RTD| 1.770| 2.491| 5.948| 0| 1.570| 21.566
RTD| 1.729| 2.522| 6.056| 0| 1.570| 21.566
RTD| 1.694| 2.452| 5.957| 0| 1.570| 21.566
RTD| 1.714| 2.465| 5.783| 0| 1.570| 21.566
RTD| 1.748| 2.509| 5.732| 0| 1.570| 21.566
RTD| 1.743| 2.538| 5.984| 0| 1.570| 21.566
RTD| 1.641| 2.441| 6.032| 0| 1.570| 21.566
RTD| 1.676| 2.529| 7.417| 0| 1.570| 21.566
RTD| 1.756| 2.180| 5.913| 0| 1.570| 21.566
RTD| 1.788| 2.171| 5.742| 0| 1.570| 21.566
RTD| 1.786| 2.118| 5.832| 0| 1.570| 21.566
RTD| 1.831| 2.137| 5.771| 0| 1.570| 21.566
RTD| 1.725| 2.349| 5.670| 0| 1.570| 21.566
RTD| 1.751| 2.515| 6.032| 0| 1.570| 21.566
RTD| 1.835| 2.075| 5.974| 0| 1.570| 21.566
RTT| 00:02:28 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.713| 2.163| 6.361| 0| 1.570| 21.566
RTD| 1.809| 2.080| 6.156| 0| 1.570| 21.566
RTD| 1.756| 2.120| 4.048| 0| 1.570| 21.566
RTD| 1.868| 2.104| 3.857| 0| 1.570| 21.566
RTD| 1.864| 2.140| 4.273| 0| 1.570| 21.566
RTD| 1.685| 2.093| 4.134| 0| 1.570| 21.566
RTD| 1.805| 2.151| 7.236| 0| 1.570| 21.566
RTD| 1.845| 2.091| 4.294| 0| 1.570| 21.566
RTD| 1.865| 2.151| 4.065| 0| 1.570| 21.566
RTD| 1.827| 2.105| 5.938| 0| 1.570| 21.566
RTD| 1.776| 2.217| 6.184| 0| 1.570| 21.566
RTD| 1.824| 2.130| 7.182| 0| 1.570| 21.566
RTD| 1.863| 2.154| 6.199| 0| 1.570| 21.566
RTD| 1.832| 2.156| 6.159| 0| 1.570| 21.566
RTD| 1.852| 2.147| 4.335| 0| 1.570| 21.566
RTD| 1.871| 2.083| 4.203| 0| 1.570| 21.566
RTD| 1.846| 2.141| 4.405| 0| 1.570| 21.566
RTD| 1.814| 2.095| 4.158| 0| 1.570| 21.566
RTD| 1.875| 2.156| 5.009| 0| 1.570| 21.566
RTD| 1.793| 2.097| 4.256| 0| 1.570| 21.566
RTD| 1.871| 2.140| 4.132| 0| 1.570| 21.566
RTT| 00:02:49 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.873| 2.089| 4.424| 0| 1.570| 21.566
RTD| 1.718| 2.141| 4.516| 0| 1.570| 21.566
RTD| 1.787| 2.416| 7.701| 0| 1.570| 21.566
RTD| 1.798| 2.510| 6.349| 0| 1.570| 21.566
RTD| 1.844| 2.514| 6.178| 0| 1.570| 21.566
RTD| 1.852| 2.205| 6.224| 0| 1.570| 21.566
RTD| 1.872| 2.096| 4.504| 0| 1.570| 21.566
RTD| 1.780| 2.152| 4.245| 0| 1.570| 21.566
RTD| 1.767| 2.105| 4.046| 0| 1.570| 21.566
RTD| 1.701| 2.288| 11.913| 0| 1.570| 21.566
RTD| 1.881| 2.093| 4.067| 0| 1.570| 21.566
RTD| 1.710| 2.844| 12.436| 0| 1.570| 21.566
RTD| 1.678| 2.116| 4.871| 0| 1.570| 21.566
RTD| 1.753| 2.214| 11.535| 0| 1.570| 21.566
RTD| 1.773| 2.073| 5.255| 0| 1.570| 21.566
RTD| 1.724| 2.225| 11.945| 0| 1.570| 21.566
RTD| 1.744| 2.079| 4.350| 0| 1.570| 21.566
RTD| 1.761| 2.182| 11.545| 0| 1.570| 21.566
RTD| 1.828| 2.081| 4.408| 0| 1.570| 21.566
RTD| 1.826| 2.172| 11.558| 0| 1.570| 21.566
RTD| 1.758| 2.076| 4.773| 0| 1.570| 21.566
RTT| 00:03:10 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.665| 2.364| 11.444| 0| 1.570| 21.566
RTD| 1.659| 2.557| 22.120| 0| 1.570| 22.120
RTD| 1.694| 2.696| 12.049| 0| 1.570| 22.120
RTD| 1.716| 2.713| 12.376| 0| 1.570| 22.120
RTD| 1.616| 2.481| 12.543| 0| 1.570| 22.120
RTD| 1.639| 2.491| 12.788| 0| 1.570| 22.120
RTD| 1.695| 2.218| 12.009| 0| 1.570| 22.120
RTD| 1.698| 2.107| 11.148| 0| 1.570| 22.120
RTD| 1.718| 2.274| 11.525| 0| 1.570| 22.120
RTD| 1.693| 2.078| 5.220| 0| 1.570| 22.120
RTD| 1.597| 2.191| 12.006| 0| 1.570| 22.120
RTD| 1.577| 2.217| 4.695| 0| 1.570| 22.120
RTD| 1.650| 2.270| 11.710| 0| 1.570| 22.120
RTD| 1.628| 2.403| 5.244| 0| 1.570| 22.120
RTD| 1.601| 2.425| 11.724| 0| 1.570| 22.120
RTD| 1.673| 2.277| 5.441| 0| 1.570| 22.120
RTD| 1.773| 2.157| 11.724| 0| 1.570| 22.120
RTD| 1.868| 2.028| 7.122| 0| 1.570| 22.120
RTD| 1.754| 2.150| 11.879| 0| 1.570| 22.120
RTD| 1.743| 2.036| 4.671| 0| 1.570| 22.120
RTD| 1.699| 2.159| 11.780| 0| 1.570| 22.120
RTT| 00:03:31 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.842| 2.020| 4.209| 0| 1.570| 22.120
RTD| 1.860| 2.128| 11.603| 0| 1.570| 22.120
RTD| 1.760| 2.031| 5.170| 0| 1.570| 22.120
RTD| 1.753| 2.172| 11.558| 0| 1.570| 22.120
RTD| 1.765| 2.034| 4.635| 0| 1.570| 22.120
RTD| 1.730| 2.166| 11.474| 0| 1.570| 22.120
RTD| 1.697| 2.114| 5.179| 0| 1.570| 22.120
RTD| 1.736| 2.254| 11.634| 0| 1.570| 22.120
RTD| 1.864| 2.029| 7.594| 0| 1.570| 22.120
RTD| 1.789| 2.193| 12.025| 0| 1.570| 22.120
RTD| 1.625| 2.239| 4.873| 0| 1.570| 22.120
RTD| 1.694| 2.265| 11.780| 0| 1.570| 22.120
RTD| 1.705| 2.244| 5.209| 0| 1.570| 22.120
RTD| 1.792| 2.199| 11.976| 0| 1.570| 22.120
RTD| 1.870| 2.038| 4.269| 0| 1.570| 22.120
RTD| 1.650| 2.212| 11.969| 0| 1.570| 22.120
RTD| 1.736| 2.094| 10.304| 0| 1.570| 22.120
RTD| 1.799| 2.168| 11.668| 0| 1.570| 22.120
RTD| 1.842| 2.032| 4.939| 0| 1.570| 22.120
RTD| 1.779| 2.163| 11.556| 0| 1.570| 22.120
RTD| 1.838| 2.032| 4.913| 0| 1.570| 22.120
RTT| 00:03:52 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.771| 2.145| 11.610| 0| 1.570| 22.120
RTD| 1.805| 2.085| 6.561| 0| 1.570| 22.120
RTD| 1.808| 2.150| 11.695| 0| 1.570| 22.120
RTD| 1.859| 2.043| 4.982| 0| 1.570| 22.120
RTD| 1.752| 2.224| 11.749| 0| 1.570| 22.120
RTD| 1.761| 2.017| 4.243| 0| 1.570| 22.120
RTD| 1.819| 2.136| 11.759| 0| 1.570| 22.120
RTD| 1.852| 2.027| 4.335| 0| 1.570| 22.120
RTD| 1.796| 2.167| 11.515| 0| 1.570| 22.120
RTD| 1.853| 2.030| 4.762| 0| 1.570| 22.120
RTD| 1.863| 2.140| 11.600| 0| 1.570| 22.120
RTD| 1.743| 2.026| 6.575| 0| 1.570| 22.120
RTD| 1.859| 2.135| 11.757| 0| 1.570| 22.120
RTD| 1.859| 2.031| 3.786| 0| 1.570| 22.120
RTD| 1.854| 2.142| 11.513| 0| 1.570| 22.120
RTD| 1.860| 2.030| 4.695| 0| 1.570| 22.120
RTD| 1.768| 2.129| 11.479| 0| 1.570| 22.120
RTD| 1.854| 2.030| 4.598| 0| 1.570| 22.120
RTD| 1.840| 2.134| 11.659| 0| 1.570| 22.120
RTD| 1.858| 2.032| 4.282| 0| 1.570| 22.120
RTD| 1.869| 2.143| 11.589| 0| 1.570| 22.120
RTT| 00:04:13 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.792| 2.031| 4.127| 0| 1.570| 22.120
RTD| 1.793| 2.132| 11.629| 0| 1.570| 22.120
RTD| 1.855| 2.029| 4.063| 0| 1.570| 22.120
RTD| 1.853| 2.142| 11.508| 0| 1.570| 22.120
RTD| 1.769| 2.053| 11.174| 0| 1.570| 22.120
RTD| 1.854| 2.131| 11.468| 0| 1.570| 22.120
RTD| 1.754| 2.033| 4.174| 0| 1.570| 22.120
RTD| 1.854| 2.138| 12.161| 0| 1.570| 22.120
RTD| 1.843| 2.029| 3.936| 0| 1.570| 22.120
RTD| 1.725| 2.141| 11.992| 0| 1.570| 22.120
RTD| 1.819| 2.040| 4.995| 0| 1.570| 22.120
RTD| 1.791| 2.163| 11.940| 0| 1.570| 22.120
RTD| 1.793| 2.030| 4.209| 0| 1.570| 22.120
RTD| 1.804| 2.159| 12.040| 0| 1.570| 22.120
RTD| 1.841| 2.049| 4.976| 0| 1.570| 22.120
RTD| 1.832| 2.180| 11.927| 0| 1.570| 22.120
RTD| 1.801| 2.088| 5.067| 0| 1.570| 22.120
RTD| 1.790| 2.161| 11.618| 0| 1.570| 22.120
RTD| 1.869| 2.076| 5.127| 0| 1.570| 22.120
RTD| 1.870| 2.188| 11.690| 0| 1.570| 22.120
RTD| 1.872| 2.043| 5.926| 0| 1.570| 22.120
RTT| 00:04:34 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.781| 2.177| 11.484| 0| 1.570| 22.120
RTD| 1.741| 2.069| 5.063| 0| 1.570| 22.120
RTD| 1.876| 2.149| 12.025| 0| 1.570| 22.120
RTD| 1.877| 2.071| 4.675| 0| 1.570| 22.120
RTD| 1.813| 2.172| 12.223| 0| 1.570| 22.120
RTD| 1.820| 2.092| 5.183| 0| 1.570| 22.120
RTD| 1.736| 2.163| 11.976| 0| 1.570| 22.120
RTD| 1.807| 2.062| 5.037| 0| 1.570| 22.120
RTD| 1.854| 2.156| 12.131| 0| 1.570| 22.120
RTD| 1.827| 2.065| 4.695| 0| 1.570| 22.120
RTD| 1.807| 2.156| 11.570| 0| 1.570| 22.120
RTD| 1.854| 2.035| 5.944| 0| 1.570| 22.120
RTD| 1.808| 2.157| 11.785| 0| 1.570| 22.120
RTD| 1.766| 2.079| 10.637| 0| 1.570| 22.120
RTD| 1.732| 2.143| 11.529| 0| 1.570| 22.120
RTD| 1.852| 2.063| 4.836| 0| 1.570| 22.120
RTD| 1.866| 2.154| 11.827| 0| 1.570| 22.120
RTD| 1.749| 2.047| 4.910| 0| 1.570| 22.120
RTD| 1.772| 2.169| 11.716| 0| 1.570| 22.120
RTD| 1.712| 2.085| 11.020| 0| 1.570| 22.120
RTD| 1.668| 2.786| 11.903| 0| 1.570| 22.120
RTT| 00:04:55 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 1.700| 2.223| 12.513| 0| 1.570| 22.120
RTD| 1.717| 2.577| 12.269| 0| 1.570| 22.120
RTD| 1.661| 2.024| 4.668| 0| 1.570| 22.120
RTD| 1.743| 2.148| 12.019| 0| 1.570| 22.120
RTD| 1.858| 2.021| 4.004| 0| 1.570| 22.120
RTD| 1.759| 2.096| 11.669| 0| 1.570| 22.120
RTD| 1.749| 2.027| 4.243| 0| 1.570| 22.120
RTD| 1.656| 2.094| 11.651| 0| 1.570| 22.120
RTD| 1.856| 2.026| 4.207| 0| 1.570| 22.120
RTD| 1.756| 2.124| 12.742| 0| 1.570| 22.120
RTD| 1.852| 2.044| 4.472| 0| 1.570| 22.120
RTD| 1.864| 2.104| 11.010| 0| 1.570| 22.120
RTD| 1.690| 2.056| 10.986| 0| 1.570| 22.120
RTD| 1.731| 2.120| 11.568| 0| 1.570| 22.120
RTD| 1.733| 2.040| 4.668| 0| 1.570| 22.120
RTD| 1.732| 2.105| 11.527| 0| 1.570| 22.120
RTD| 1.661| 2.018| 4.220| 0| 1.570| 22.120
RTD| 1.737| 2.078| 11.456| 0| 1.570| 22.120
RTD| 1.772| 2.015| 4.147| 0| 1.570| 22.120
RTD| 1.843| 2.092| 11.469| 0| 1.570| 22.120
RTD| 1.814| 2.021| 4.356| 0| 1.570| 22.120
[-- Attachment #4: max --]
[-- Type: text/plain, Size: 2247 bytes --]
I-pipe worst-case tracing service on 2.6.19.3-xenomai/ipipe-1.0-04
------------------------------------------------------------
Begin: 685320908515 cycles, Trace Points: 6 (-10/+1), Length: 4001 us
Calibrated minimum trace-point overhead: 0.037 us
+----- Hard IRQs ('|': locked)
|+---- <unused>
||+--- <unused>
|||+-- Xenomai
||||+- Linux ('*': domain stalled, '+': current, '#': current+stalled)
||||| +---------- Delay flag ('+': > 1 us, '!': > 10 us)
||||| | +- NMI noise ('N')
||||| | |
Type User Val. Time Delay Function (Parent)
| *+func -2 0.390 xnintr_init+0x9 (xnpod_enable_timesource+0x97)
| *+func -2 0.070 __ipipe_restore_pipeline_head+0x16 (xnpod_enable_timesource+0xbc)
| +end 0x80000000 -1 0.246 __ipipe_restore_pipeline_head+0xb1 (xnpod_enable_timesource+0xbc)
+func -1 0.249 rthal_timer_request+0xc (xnpod_enable_timesource+0xc8)
+func -1 0.158 rthal_irq_release+0x9 (rthal_timer_request+0x19)
+func -1 0.394 ipipe_virtualize_irq+0x21 (rthal_irq_release+0x31)
| +begin 0x80000001 0 0.361 ipipe_virtualize_irq+0xa1 (rthal_irq_release+0x31)
| +end 0x80000001 0 0.423 ipipe_virtualize_irq+0x1cc (rthal_irq_release+0x31)
+func 0 0.054 rthal_critical_enter+0x16 (rthal_timer_request+0x32)
+func 0 0.047 ipipe_critical_enter+0xe (rthal_critical_enter+0x1e)
>| +begin 0x80000001 0! 4000.972 ipipe_critical_enter+0x20 (rthal_critical_enter+0x1e)
:| +func 4000 0.064 rthal_irq_request+0x9 (rthal_timer_request+0xe0)
:| +func 4001 0.126 ipipe_virtualize_irq+0x21 (rthal_irq_request+0x3f)
:| +func 4001 0.061 rthal_critical_exit+0x9 (rthal_timer_request+0xe8)
:| +func 4001 0.047 ipipe_critical_exit+0xe (rthal_critical_exit+0x14)
<| +end 0x80000001 4001 0.723 ipipe_critical_exit+0x20 (rthal_critical_exit+0x14)
| +begin 0x000000ef 4001 0.000 ipipe_trace_begin_thunk+0x35 (ipipe_critical_exit+0x22)
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2007-02-25 22:38 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-24 15:26 [Xenomai-core] x86_64 - Initial results Paul
2007-02-24 15:56 ` Philippe Gerum
2007-02-24 16:55 ` Paul
2007-02-24 17:17 ` Philippe Gerum
2007-02-25 1:06 ` Paul
2007-02-25 10:02 ` Jan Kiszka
2007-02-25 15:57 ` Paul
2007-02-25 16:03 ` Jan Kiszka
2007-02-25 18:42 ` Paul
2007-02-25 19:14 ` Jan Kiszka
2007-02-25 22:00 ` Philippe Gerum
2007-02-25 22:38 ` Paul
2007-02-25 16:09 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.