[PATCH 00 of 31] x86: unification and xen updates

[PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Hi Ingo,

This is a great big pile of x86 unification and Xen bugfix patches.
They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).

Patches are based on x86.git#testing as of this morning.

The overview:

 - a couple of Xen bugfixes, which are 2.6.24 and 2.6.25 material
 - a bunch of x86 cleanups and unifications, mostly around pgalloc
 - some Xen fixes and improvements:
   - unify PAE/non-PAE pagetable handling
   - implement sysenter where applicable

Thanks,
	J

[PATCH 01 of 31] xen: fix RMW when unmasking events

[Jeremy Fitzhardinge]

xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff,
XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones
in one instuction.

Unfortunately, the pending flag must be modified with a locked operation
since it can be set by another CPU, and the unlocked form of this
operation was causing the pending flag to get lost, allowing the processor
to return to usermode with pending events and ultimately deadlock.

The simple fix would be to make it a locked operation, but that's rather
costly and unnecessary.  The fix here is to split the mask-clearing and
pending-testing into two instructions; the interrupt window between
them is of no concern because either way pending or new events will
be processed.

This should fix lingering bugs in using direct vcpu structure access too.

[ Stable: needed in 2.6.24.x ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable <stable@kernel.org>
---
 arch/x86/xen/enlighten.c |    2 +-
 arch/x86/xen/xen-asm.S   |    9 +++++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -96,7 +96,7 @@
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
 
 static void __init xen_vcpu_setup(int cpu)
 {
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
-	/* Clear mask and test pending */
-	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
 	jz 1f
+
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)

[PATCH 01 of 31] xen: fix RMW when unmasking events

[Jeremy Fitzhardinge]

xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff,
XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones
in one instuction.

Unfortunately, the pending flag must be modified with a locked operation
since it can be set by another CPU, and the unlocked form of this
operation was causing the pending flag to get lost, allowing the processor
to return to usermode with pending events and ultimately deadlock.

The simple fix would be to make it a locked operation, but that's rather
costly and unnecessary.  The fix here is to split the mask-clearing and
pending-testing into two instructions; the interrupt window between
them is of no concern because either way pending or new events will
be processed.

This should fix lingering bugs in using direct vcpu structure access too.

[ Stable: needed in 2.6.24.x ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable <stable@kernel.org>
---
 arch/x86/xen/enlighten.c |    2 +-
 arch/x86/xen/xen-asm.S   |    9 +++++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -96,7 +96,7 @@
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
 
 static void __init xen_vcpu_setup(int cpu)
 {
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
-	/* Clear mask and test pending */
-	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
 	jz 1f
+
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)

[PATCH 02 of 31] xen: fix UP setup of shared_info

We need to set up the shared_info pointer once we've mapped the real
shared_info into its fixmap slot.  That needs to happen once the general
pagetable setup has been done.  Previously, the UP shared_info was set
up one in xen_start_kernel, but that was left pointing to the dummy
shared info.  Unfortunately there's no really good place to do a later
setup of the shared_info in UP, so just do it once the pagetable setup
has been done.

[ Stable: needed in 2.6.24.x ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
---
 arch/x86/xen/enlighten.c |   51 +++++++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -104,6 +104,7 @@
 	int err;
 	struct vcpu_info *vcpup;
 
+	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -806,6 +807,31 @@
 			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
+static __init void setup_shared_info(void)
+{
+	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
+		/*
+		 * Create a mapping for the shared info page.
+		 * Should be set_fixmap(), but shared_info is a machine
+		 * address with no corresponding pseudo-phys address.
+		 */
+		set_pte_mfn(addr,
+			    PFN_DOWN(xen_start_info->shared_info),
+			    PAGE_KERNEL);
+
+		HYPERVISOR_shared_info = (struct shared_info *)addr;
+	} else
+		HYPERVISOR_shared_info =
+			(struct shared_info *)__va(xen_start_info->shared_info);
+
+#ifndef CONFIG_SMP
+	/* In UP this is as good a place as any to set up shared info */
+	xen_setup_vcpu_info_placement();
+#endif
+}
+
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
 	/* This will work as long as patching hasn't happened yet
@@ -816,22 +842,7 @@
 	pv_mmu_ops.release_pd = xen_release_pt;
 	pv_mmu_ops.set_pte = xen_set_pte;
 
-	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info =
-			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-	} else
-		HYPERVISOR_shared_info =
-			(struct shared_info *)__va(xen_start_info->shared_info);
+	setup_shared_info();
 
 	/* Actually pin the pagetable down, but we can't set PG_pinned
 	   yet because the page structures don't exist yet. */
@@ -1182,15 +1193,9 @@
 	x86_write_percpu(xen_cr3, __pa(pgd));
 	x86_write_percpu(xen_current_cr3, __pa(pgd));
 
-#ifdef CONFIG_SMP
 	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map. */
+	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
-	/* May as well do it now, since there's no good time to call
-	   it later on UP. */
-	xen_setup_vcpu_info_placement();
-#endif
 
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))

[PATCH 02 of 31] xen: fix UP setup of shared_info

[Jeremy Fitzhardinge]

We need to set up the shared_info pointer once we've mapped the real
shared_info into its fixmap slot.  That needs to happen once the general
pagetable setup has been done.  Previously, the UP shared_info was set
up one in xen_start_kernel, but that was left pointing to the dummy
shared info.  Unfortunately there's no really good place to do a later
setup of the shared_info in UP, so just do it once the pagetable setup
has been done.

[ Stable: needed in 2.6.24.x ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
---
 arch/x86/xen/enlighten.c |   51 +++++++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -104,6 +104,7 @@
 	int err;
 	struct vcpu_info *vcpup;
 
+	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -806,6 +807,31 @@
 			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
+static __init void setup_shared_info(void)
+{
+	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
+		/*
+		 * Create a mapping for the shared info page.
+		 * Should be set_fixmap(), but shared_info is a machine
+		 * address with no corresponding pseudo-phys address.
+		 */
+		set_pte_mfn(addr,
+			    PFN_DOWN(xen_start_info->shared_info),
+			    PAGE_KERNEL);
+
+		HYPERVISOR_shared_info = (struct shared_info *)addr;
+	} else
+		HYPERVISOR_shared_info =
+			(struct shared_info *)__va(xen_start_info->shared_info);
+
+#ifndef CONFIG_SMP
+	/* In UP this is as good a place as any to set up shared info */
+	xen_setup_vcpu_info_placement();
+#endif
+}
+
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
 	/* This will work as long as patching hasn't happened yet
@@ -816,22 +842,7 @@
 	pv_mmu_ops.release_pd = xen_release_pt;
 	pv_mmu_ops.set_pte = xen_set_pte;
 
-	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info =
-			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-	} else
-		HYPERVISOR_shared_info =
-			(struct shared_info *)__va(xen_start_info->shared_info);
+	setup_shared_info();
 
 	/* Actually pin the pagetable down, but we can't set PG_pinned
 	   yet because the page structures don't exist yet. */
@@ -1182,15 +1193,9 @@
 	x86_write_percpu(xen_cr3, __pa(pgd));
 	x86_write_percpu(xen_current_cr3, __pa(pgd));
 
-#ifdef CONFIG_SMP
 	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map. */
+	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
-	/* May as well do it now, since there's no good time to call
-	   it later on UP. */
-	xen_setup_vcpu_info_placement();
-#endif
 
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))

[PATCH 03 of 31] x86: convert pgalloc_64.h from macros to inlines

[Jeremy Fitzhardinge]

Convert asm-x86/pgalloc_64.h from macros into functions (#include hell
prevents __*_free_tlb from being inline, but they're probably a bit
big to inline anyway).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c        |   16 ++++++++++++++++
 include/asm-x86/pgalloc_64.h |   33 ++++++++++++++++++---------------
 2 files changed, 34 insertions(+), 15 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -847,3 +847,19 @@
 	return 0;
 }
 #endif
+
+void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+{
+	pgtable_page_dtor(pte);
+	tlb_remove_page(tlb, pte);
+}
+
+void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+	tlb_remove_page(tlb, virt_to_page(pmd));
+}
+
+void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+{
+	tlb_remove_page(tlb, virt_to_page(pud));
+}
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
--- a/include/asm-x86/pgalloc_64.h
+++ b/include/asm-x86/pgalloc_64.h
@@ -1,16 +1,24 @@
 #ifndef _X86_64_PGALLOC_H
 #define _X86_64_PGALLOC_H
 
-#include <asm/pda.h>
 #include <linux/threads.h>
 #include <linux/mm.h>
+#include <asm/pda.h>
 
-#define pmd_populate_kernel(mm, pmd, pte) \
-		set_pmd(pmd, __pmd(_PAGE_TABLE | __pa(pte)))
-#define pud_populate(mm, pud, pmd) \
-		set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)))
-#define pgd_populate(mm, pgd, pud) \
-		set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)))
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	set_pmd(pmd, __pmd(_PAGE_TABLE | __pa(pte)));
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
+}
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
+}
 
 #define pmd_pgtable(pmd) pmd_page(pmd)
 
@@ -121,13 +129,8 @@
 	__free_page(pte);
 } 
 
-#define __pte_free_tlb(tlb,pte)				\
-do {							\
-	pgtable_page_dtor((pte));				\
-	tlb_remove_page((tlb), (pte));			\
-} while (0)
-
-#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
-#define __pud_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
 
 #endif /* _X86_64_PGALLOC_H */

[PATCH 04 of 31] x86: add common mm/pgtable.c

[Jeremy Fitzhardinge]

Add a common arch/x86/mm/pgtable.c file for common pagetable functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/Makefile         |    2
 arch/x86/mm/pgtable.c        |  239 ++++++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/pgtable_32.c     |  187 --------------------------------
 include/asm-x86/pgalloc.h    |   18 +++
 include/asm-x86/pgalloc_32.h |   11 -
 include/asm-x86/pgalloc_64.h |   67 -----------
 6 files changed, 258 insertions(+), 266 deletions(-)

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,4 +1,4 @@
-obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o
+obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o pgtable.o mmap.o
 
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
new file mode 100644
--- /dev/null
+++ b/arch/x86/mm/pgtable.c
@@ -0,0 +1,239 @@
+#include <linux/mm.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+}
+
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0);
+#else
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#endif
+	if (pte)
+		pgtable_page_ctor(pte);
+	return pte;
+}
+
+#ifdef CONFIG_X86_64
+static inline void pgd_list_add(pgd_t *pgd)
+{
+	struct page *page = virt_to_page(pgd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pgd_lock, flags);
+	list_add(&page->lru, &pgd_list);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+	struct page *page = virt_to_page(pgd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pgd_lock, flags);
+	list_del(&page->lru);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	unsigned boundary;
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+	if (!pgd)
+		return NULL;
+	pgd_list_add(pgd);
+	/*
+	 * Copy kernel pointers in from init.
+	 * Could keep a freelist or slab cache of those because the kernel
+	 * part never changes.
+	 */
+	boundary = pgd_index(__PAGE_OFFSET);
+	memset(pgd, 0, boundary * sizeof(pgd_t));
+	memcpy(pgd + boundary,
+	       init_level4_pgt + boundary,
+	       (PTRS_PER_PGD - boundary) * sizeof(pgd_t));
+	return pgd;
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	BUG_ON((unsigned long)pgd & (PAGE_SIZE-1));
+	pgd_list_del(pgd);
+	free_page((unsigned long)pgd);
+}
+#else
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * -- wli
+ */
+static inline void pgd_list_add(pgd_t *pgd)
+{
+	struct page *page = virt_to_page(pgd);
+
+	list_add(&page->lru, &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+	struct page *page = virt_to_page(pgd);
+
+	list_del(&page->lru);
+}
+
+#define UNSHARED_PTRS_PER_PGD				\
+	(SHARED_KERNEL_PMD ? USER_PTRS_PER_PGD : PTRS_PER_PGD)
+
+static void pgd_ctor(void *p)
+{
+	pgd_t *pgd = p;
+	unsigned long flags;
+
+	/* Clear usermode parts of PGD */
+	memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
+
+	spin_lock_irqsave(&pgd_lock, flags);
+
+	/* If the pgd points to a shared pagetable level (either the
+	   ptes in non-PAE, or shared PMD in PAE), then just copy the
+	   references from swapper_pg_dir. */
+	if (PAGETABLE_LEVELS == 2 ||
+	    (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD)) {
+		clone_pgd_range(pgd + USER_PTRS_PER_PGD,
+				swapper_pg_dir + USER_PTRS_PER_PGD,
+				KERNEL_PGD_PTRS);
+		paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT,
+					__pa(swapper_pg_dir) >> PAGE_SHIFT,
+					USER_PTRS_PER_PGD,
+					KERNEL_PGD_PTRS);
+	}
+
+	/* list required to sync kernel mapping updates */
+	if (!SHARED_KERNEL_PMD)
+		pgd_list_add(pgd);
+
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+static void pgd_dtor(void *pgd)
+{
+	unsigned long flags; /* can be called from interrupt context */
+
+	if (SHARED_KERNEL_PMD)
+		return;
+
+	spin_lock_irqsave(&pgd_lock, flags);
+	pgd_list_del(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+#ifdef CONFIG_X86_PAE
+/*
+ * Mop up any pmd pages which may still be attached to the pgd.
+ * Normally they will be freed by munmap/exit_mmap, but any pmd we
+ * preallocate which never got a corresponding vma will need to be
+ * freed manually.
+ */
+static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
+{
+	int i;
+
+	for(i = 0; i < UNSHARED_PTRS_PER_PGD; i++) {
+		pgd_t pgd = pgdp[i];
+
+		if (pgd_val(pgd) != 0) {
+			pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
+
+			pgdp[i] = native_make_pgd(0);
+
+			paravirt_release_pd(pgd_val(pgd) >> PAGE_SHIFT);
+			pmd_free(mm, pmd);
+		}
+	}
+}
+
+/*
+ * In PAE mode, we need to do a cr3 reload (=tlb flush) when
+ * updating the top-level pagetable entries to guarantee the
+ * processor notices the update.  Since this is expensive, and
+ * all 4 top-level entries are used almost immediately in a
+ * new process's life, we just pre-populate them here.
+ *
+ * Also, if we're in a paravirt environment where the kernel pmd is
+ * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate
+ * and initialize the kernel pmds here.
+ */
+static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
+{
+	pud_t *pud;
+	unsigned long addr;
+	int i;
+
+	pud = pud_offset(pgd, 0);
+ 	for (addr = i = 0; i < UNSHARED_PTRS_PER_PGD;
+	     i++, pud++, addr += PUD_SIZE) {
+		pmd_t *pmd = pmd_alloc_one(mm, addr);
+
+		if (!pmd) {
+			pgd_mop_up_pmds(mm, pgd);
+			return 0;
+		}
+
+		if (i >= USER_PTRS_PER_PGD)
+			memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]),
+			       sizeof(pmd_t) * PTRS_PER_PMD);
+
+		pud_populate(mm, pud, pmd);
+	}
+
+	return 1;
+}
+#else  /* !CONFIG_X86_PAE */
+/* No need to prepopulate any pagetable entries in non-PAE modes. */
+static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
+{
+	return 1;
+}
+
+static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgd)
+{
+}
+#endif	/* CONFIG_X86_PAE */
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+
+	/* so that alloc_pd can use it */
+	mm->pgd = pgd;
+	if (pgd)
+		pgd_ctor(pgd);
+
+	if (pgd && !pgd_prepopulate_pmd(mm, pgd)) {
+		pgd_dtor(pgd);
+		free_page((unsigned long)pgd);
+		pgd = NULL;
+	}
+
+	return pgd;
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	pgd_mop_up_pmds(mm, pgd);
+	pgd_dtor(pgd);
+	free_page((unsigned long)pgd);
+}
+#endif
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -173,193 +173,6 @@
 	__VMALLOC_RESERVE += reserve;
 }
 
-pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-}
-
-pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *pte;
-
-#ifdef CONFIG_HIGHPTE
-	pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0);
-#else
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-#endif
-	if (pte)
-		pgtable_page_ctor(pte);
-	return pte;
-}
-
-/*
- * List of all pgd's needed for non-PAE so it can invalidate entries
- * in both cached and uncached pgd's; not needed for PAE since the
- * kernel pmd is shared. If PAE were not to share the pmd a similar
- * tactic would be needed. This is essentially codepath-based locking
- * against pageattr.c; it is the unique case in which a valid change
- * of kernel pagetables can't be lazily synchronized by vmalloc faults.
- * vmalloc faults work because attached pagetables are never freed.
- * -- wli
- */
-static inline void pgd_list_add(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-
-	list_add(&page->lru, &pgd_list);
-}
-
-static inline void pgd_list_del(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-
-	list_del(&page->lru);
-}
-
-#define UNSHARED_PTRS_PER_PGD				\
-	(SHARED_KERNEL_PMD ? USER_PTRS_PER_PGD : PTRS_PER_PGD)
-
-static void pgd_ctor(void *p)
-{
-	pgd_t *pgd = p;
-	unsigned long flags;
-
-	/* Clear usermode parts of PGD */
-	memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
-
-	spin_lock_irqsave(&pgd_lock, flags);
-
-	/* If the pgd points to a shared pagetable level (either the
-	   ptes in non-PAE, or shared PMD in PAE), then just copy the
-	   references from swapper_pg_dir. */
-	if (PAGETABLE_LEVELS == 2 ||
-	    (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD)) {
-		clone_pgd_range(pgd + USER_PTRS_PER_PGD,
-				swapper_pg_dir + USER_PTRS_PER_PGD,
-				KERNEL_PGD_PTRS);
-		paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT,
-					__pa(swapper_pg_dir) >> PAGE_SHIFT,
-					USER_PTRS_PER_PGD,
-					KERNEL_PGD_PTRS);
-	}
-
-	/* list required to sync kernel mapping updates */
-	if (!SHARED_KERNEL_PMD)
-		pgd_list_add(pgd);
-
-	spin_unlock_irqrestore(&pgd_lock, flags);
-}
-
-static void pgd_dtor(void *pgd)
-{
-	unsigned long flags; /* can be called from interrupt context */
-
-	if (SHARED_KERNEL_PMD)
-		return;
-
-	spin_lock_irqsave(&pgd_lock, flags);
-	pgd_list_del(pgd);
-	spin_unlock_irqrestore(&pgd_lock, flags);
-}
-
-#ifdef CONFIG_X86_PAE
-/*
- * Mop up any pmd pages which may still be attached to the pgd.
- * Normally they will be freed by munmap/exit_mmap, but any pmd we
- * preallocate which never got a corresponding vma will need to be
- * freed manually.
- */
-static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
-{
-	int i;
-
-	for(i = 0; i < UNSHARED_PTRS_PER_PGD; i++) {
-		pgd_t pgd = pgdp[i];
-
-		if (pgd_val(pgd) != 0) {
-			pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
-
-			pgdp[i] = native_make_pgd(0);
-
-			paravirt_release_pd(pgd_val(pgd) >> PAGE_SHIFT);
-			pmd_free(mm, pmd);
-		}
-	}
-}
-
-/*
- * In PAE mode, we need to do a cr3 reload (=tlb flush) when
- * updating the top-level pagetable entries to guarantee the
- * processor notices the update.  Since this is expensive, and
- * all 4 top-level entries are used almost immediately in a
- * new process's life, we just pre-populate them here.
- *
- * Also, if we're in a paravirt environment where the kernel pmd is
- * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate
- * and initialize the kernel pmds here.
- */
-static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
-{
-	pud_t *pud;
-	unsigned long addr;
-	int i;
-
-	pud = pud_offset(pgd, 0);
- 	for (addr = i = 0; i < UNSHARED_PTRS_PER_PGD;
-	     i++, pud++, addr += PUD_SIZE) {
-		pmd_t *pmd = pmd_alloc_one(mm, addr);
-
-		if (!pmd) {
-			pgd_mop_up_pmds(mm, pgd);
-			return 0;
-		}
-
-		if (i >= USER_PTRS_PER_PGD)
-			memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]),
-			       sizeof(pmd_t) * PTRS_PER_PMD);
-
-		pud_populate(mm, pud, pmd);
-	}
-
-	return 1;
-}
-#else  /* !CONFIG_X86_PAE */
-/* No need to prepopulate any pagetable entries in non-PAE modes. */
-static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
-{
-	return 1;
-}
-
-static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
-{
-}
-#endif	/* CONFIG_X86_PAE */
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-
-	/* so that alloc_pd can use it */
-	mm->pgd = pgd;
-	if (pgd)
-		pgd_ctor(pgd);
-
-	if (pgd && !pgd_prepopulate_pmd(mm, pgd)) {
-		pgd_dtor(pgd);
-		free_page((unsigned long)pgd);
-		pgd = NULL;
-	}
-
-	return pgd;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	pgd_mop_up_pmds(mm, pgd);
-	pgd_dtor(pgd);
-	free_page((unsigned long)pgd);
-}
-
 void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -1,5 +1,23 @@
+#ifndef _ASM_X86_PGALLOC_H
+#define _ASM_X86_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>		/* for struct page */
+#include <linux/pagemap.h>
+
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
 #ifdef CONFIG_X86_32
 # include "pgalloc_32.h"
 #else
 # include "pgalloc_64.h"
 #endif
+
+#endif	/* _ASM_X86_PGALLOC_H */
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
--- a/include/asm-x86/pgalloc_32.h
+++ b/include/asm-x86/pgalloc_32.h
@@ -1,11 +1,5 @@
 #ifndef _I386_PGALLOC_H
 #define _I386_PGALLOC_H
-
-#include <linux/threads.h>
-#include <linux/mm.h>		/* for struct page */
-#include <linux/pagemap.h>
-#include <asm/tlb.h>
-#include <asm-generic/tlb.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
@@ -36,11 +30,6 @@
 /*
  * Allocate and free page tables.
  */
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
--- a/include/asm-x86/pgalloc_64.h
+++ b/include/asm-x86/pgalloc_64.h
@@ -1,8 +1,6 @@
 #ifndef _X86_64_PGALLOC_H
 #define _X86_64_PGALLOC_H
 
-#include <linux/threads.h>
-#include <linux/mm.h>
 #include <asm/pda.h>
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
@@ -49,71 +47,6 @@
 	free_page((unsigned long)pud);
 }
 
-static inline void pgd_list_add(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&pgd_lock, flags);
-	list_add(&page->lru, &pgd_list);
-	spin_unlock_irqrestore(&pgd_lock, flags);
-}
-
-static inline void pgd_list_del(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&pgd_lock, flags);
-	list_del(&page->lru);
-	spin_unlock_irqrestore(&pgd_lock, flags);
-}
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	unsigned boundary;
-	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
-	if (!pgd)
-		return NULL;
-	pgd_list_add(pgd);
-	/*
-	 * Copy kernel pointers in from init.
-	 * Could keep a freelist or slab cache of those because the kernel
-	 * part never changes.
-	 */
-	boundary = pgd_index(__PAGE_OFFSET);
-	memset(pgd, 0, boundary * sizeof(pgd_t));
-	memcpy(pgd + boundary,
-	       init_level4_pgt + boundary,
-	       (PTRS_PER_PGD - boundary) * sizeof(pgd_t));
-	return pgd;
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	BUG_ON((unsigned long)pgd & (PAGE_SIZE-1));
-	pgd_list_del(pgd);
-	free_page((unsigned long)pgd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	return (pte_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *page;
-	void *p;
-
-	p = (void *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-	if (!p)
-		return NULL;
-	page = virt_to_page(p);
-	pgtable_page_ctor(page);
-	return page;
-}
-
 /* Should really implement gc for free page table pages. This could be
    done with a reference count in struct page. */
 

[PATCH 05 of 31] x86: put paravirt stubs into common asm/pgalloc.h

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/pageattr.c       |    2 --
 include/asm-x86/pgalloc.h    |   10 ++++++++++
 include/asm-x86/pgalloc_32.h |   10 ----------
 3 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -479,9 +479,7 @@
 		goto out_unlock;
 
 	pbase = (pte_t *)page_address(base);
-#ifdef CONFIG_X86_32
 	paravirt_alloc_pt(&init_mm, page_to_pfn(base));
-#endif
 	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
 
 #ifdef CONFIG_X86_64
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -4,6 +4,16 @@
 #include <linux/threads.h>
 #include <linux/mm.h>		/* for struct page */
 #include <linux/pagemap.h>
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define paravirt_alloc_pt(mm, pfn) do { } while (0)
+#define paravirt_alloc_pd(mm, pfn) do { } while (0)
+#define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) do { } while (0)
+#define paravirt_release_pt(pfn) do { } while (0)
+#define paravirt_release_pd(pfn) do { } while (0)
+#endif
 
 /*
  * Allocate and free page tables.
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
--- a/include/asm-x86/pgalloc_32.h
+++ b/include/asm-x86/pgalloc_32.h
@@ -1,15 +1,5 @@
 #ifndef _I386_PGALLOC_H
 #define _I386_PGALLOC_H
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define paravirt_alloc_pt(mm, pfn) do { } while (0)
-#define paravirt_alloc_pd(mm, pfn) do { } while (0)
-#define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) do { } while (0)
-#define paravirt_release_pt(pfn) do { } while (0)
-#define paravirt_release_pd(pfn) do { } while (0)
-#endif
 
 static inline void pmd_populate_kernel(struct mm_struct *mm,
 				       pmd_t *pmd, pte_t *pte)

[PATCH 06 of 31] x86: move pte functions into common asm/pgalloc.h

[Jeremy Fitzhardinge]

Common definitions for 2-level pagetable functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c        |    6 ------
 arch/x86/mm/pgtable.c        |    7 +++++++
 arch/x86/mm/pgtable_32.c     |    7 -------
 include/asm-x86/pgalloc.h    |   16 ++++++++++++++++
 include/asm-x86/pgalloc_32.h |   18 ------------------
 include/asm-x86/pgalloc_64.h |   16 ----------------
 6 files changed, 23 insertions(+), 47 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -848,12 +848,6 @@
 }
 #endif
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
-{
-	pgtable_page_dtor(pte);
-	tlb_remove_page(tlb, pte);
-}
-
 void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
 	tlb_remove_page(tlb, virt_to_page(pmd));
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -19,6 +19,13 @@
 	if (pte)
 		pgtable_page_ctor(pte);
 	return pte;
+}
+
+void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+{
+	pgtable_page_dtor(pte);
+	paravirt_release_pt(page_to_pfn(pte));
+	tlb_remove_page(tlb, pte);
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -173,13 +173,6 @@
 	__VMALLOC_RESERVE += reserve;
 }
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
-{
-	pgtable_page_dtor(pte);
-	paravirt_release_pt(page_to_pfn(pte));
-	tlb_remove_page(tlb, pte);
-}
-
 #ifdef CONFIG_X86_PAE
 
 void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -24,6 +24,22 @@
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
 extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
 
+/* Should really implement gc for free page table pages. This could be
+   done with a reference count in struct page. */
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	__free_page(pte);
+}
+
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
 #ifdef CONFIG_X86_32
 # include "pgalloc_32.h"
 #else
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
--- a/include/asm-x86/pgalloc_32.h
+++ b/include/asm-x86/pgalloc_32.h
@@ -16,24 +16,6 @@
 	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
 }
 #define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * Allocate and free page tables.
- */
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	__free_page(pte);
-}
-
-
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
 
 #ifdef CONFIG_X86_PAE
 /*
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
--- a/include/asm-x86/pgalloc_64.h
+++ b/include/asm-x86/pgalloc_64.h
@@ -47,22 +47,6 @@
 	free_page((unsigned long)pud);
 }
 
-/* Should really implement gc for free page table pages. This could be
-   done with a reference count in struct page. */
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
-	free_page((unsigned long)pte); 
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	__free_page(pte);
-} 
-
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
 extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
 extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
 

[PATCH 07 of 31] x86: move pmd functions into common asm/pgalloc.h

[Jeremy Fitzhardinge]

Common definitions for 3-level pagetable functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c        |    5 -----
 arch/x86/mm/pgtable.c        |    8 ++++++++
 arch/x86/mm/pgtable_32.c     |   10 ----------
 include/asm-x86/pgalloc.h    |   33 +++++++++++++++++++++++++++++++++
 include/asm-x86/pgalloc_32.h |   32 --------------------------------
 include/asm-x86/pgalloc_64.h |   24 ------------------------
 6 files changed, 41 insertions(+), 71 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -848,11 +848,6 @@
 }
 #endif
 
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
-{
-	tlb_remove_page(tlb, virt_to_page(pmd));
-}
-
 void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
 	tlb_remove_page(tlb, virt_to_page(pud));
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -27,6 +27,14 @@
 	paravirt_release_pt(page_to_pfn(pte));
 	tlb_remove_page(tlb, pte);
 }
+
+#if PAGETABLE_LEVELS > 2
+void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+	paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT);
+	tlb_remove_page(tlb, virt_to_page(pmd));
+}
+#endif	/* PAGETABLE_LEVELS > 2 */
 
 #ifdef CONFIG_X86_64
 static inline void pgd_list_add(pgd_t *pgd)
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -173,16 +173,6 @@
 	__VMALLOC_RESERVE += reserve;
 }
 
-#ifdef CONFIG_X86_PAE
-
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
-{
-	paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT);
-	tlb_remove_page(tlb, virt_to_page(pmd));
-}
-
-#endif
-
 int pmd_bad(pmd_t pmd)
 {
 	WARN_ON_ONCE(pmd_bad_v1(pmd) != pmd_bad_v2(pmd));
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -40,6 +40,39 @@
 
 extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
 
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	paravirt_alloc_pt(mm, __pa(pte) >> PAGE_SHIFT);
+	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	unsigned long pfn = page_to_pfn(pte);
+
+	paravirt_alloc_pt(mm, pfn);
+	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
+}
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#if PAGETABLE_LEVELS > 2
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+#endif	/* PAGETABLE_LEVELS > 2 */
+
 #ifdef CONFIG_X86_32
 # include "pgalloc_32.h"
 #else
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
--- a/include/asm-x86/pgalloc_32.h
+++ b/include/asm-x86/pgalloc_32.h
@@ -1,39 +1,7 @@
 #ifndef _I386_PGALLOC_H
 #define _I386_PGALLOC_H
 
-static inline void pmd_populate_kernel(struct mm_struct *mm,
-				       pmd_t *pmd, pte_t *pte)
-{
-	paravirt_alloc_pt(mm, __pa(pte) >> PAGE_SHIFT);
-	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
-{
-	unsigned long pfn = page_to_pfn(pte);
-
-	paravirt_alloc_pt(mm, pfn);
-	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
 #ifdef CONFIG_X86_PAE
-/*
- * In the PAE case we free the pmds as part of the pgd.
- */
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
-	free_page((unsigned long)pmd);
-}
-
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
-
 static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
 {
 	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
--- a/include/asm-x86/pgalloc_64.h
+++ b/include/asm-x86/pgalloc_64.h
@@ -2,11 +2,6 @@
 #define _X86_64_PGALLOC_H
 
 #include <asm/pda.h>
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
-	set_pmd(pmd, __pmd(_PAGE_TABLE | __pa(pte)));
-}
 
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
@@ -16,24 +11,6 @@
 static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
 {
 	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
-}
-
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
-{
-	set_pmd(pmd, __pmd(_PAGE_TABLE | (page_to_pfn(pte) << PAGE_SHIFT)));
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
-	free_page((unsigned long)pmd);
-}
-
-static inline pmd_t *pmd_alloc_one (struct mm_struct *mm, unsigned long addr)
-{
-	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
 }
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
@@ -47,7 +24,6 @@
 	free_page((unsigned long)pud);
 }
 
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
 extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
 
 #endif /* _X86_64_PGALLOC_H */

[PATCH 08 of 31] x86: move pgalloc pud and pgd operations into common place

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c        |    5 ----
 arch/x86/mm/pgtable.c        |    7 +++++
 include/asm-x86/pgalloc.h    |   52 +++++++++++++++++++++++++++++++++++++-----
 include/asm-x86/pgalloc_32.h |   24 -------------------
 include/asm-x86/pgalloc_64.h |   29 -----------------------
 5 files changed, 53 insertions(+), 64 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -847,8 +847,3 @@
 	return 0;
 }
 #endif
-
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
-{
-	tlb_remove_page(tlb, virt_to_page(pud));
-}
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -34,6 +34,13 @@
 	paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pmd));
 }
+
+#if PAGETABLE_LEVELS > 3
+void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+{
+	tlb_remove_page(tlb, virt_to_page(pud));
+}
+#endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #ifdef CONFIG_X86_64
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -71,12 +71,52 @@
 }
 
 extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+#ifdef CONFIG_X86_PAE
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
+{
+	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
+
+	/* Note: almost everything apart from _PAGE_PRESENT is
+	   reserved at the pmd (PDPT) level. */
+	set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT));
+
+	/*
+	 * According to Intel App note "TLBs, Paging-Structure Caches,
+	 * and Their Invalidation", April 2007, document 317080-001,
+	 * section 8.1: in PAE mode we explicitly have to flush the
+	 * TLB via cr3 if the top-level pgd is changed...
+	 */
+	if (mm == current->active_mm)
+		write_cr3(read_cr3());
+}
+#else	/* !CONFIG_X86_PAE */
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
+	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
+}
+#endif	/* CONFIG_X86_PAE */
+
+#if PAGETABLE_LEVELS > 3
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
+	free_page((unsigned long)pud);
+}
+
+extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+#endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
-#ifdef CONFIG_X86_32
-# include "pgalloc_32.h"
-#else
-# include "pgalloc_64.h"
-#endif
-
 #endif	/* _ASM_X86_PGALLOC_H */
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
deleted file mode 100644
--- a/include/asm-x86/pgalloc_32.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _I386_PGALLOC_H
-#define _I386_PGALLOC_H
-
-#ifdef CONFIG_X86_PAE
-static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
-{
-	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
-
-	/* Note: almost everything apart from _PAGE_PRESENT is
-	   reserved at the pmd (PDPT) level. */
-	set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT));
-
-	/*
-	 * According to Intel App note "TLBs, Paging-Structure Caches,
-	 * and Their Invalidation", April 2007, document 317080-001,
-	 * section 8.1: in PAE mode we explicitly have to flush the
-	 * TLB via cr3 if the top-level pgd is changed...
-	 */
-	if (mm == current->active_mm)
-		write_cr3(read_cr3());
-}
-#endif	/* CONFIG_X86_PAE */
-
-#endif /* _I386_PGALLOC_H */
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
deleted file mode 100644
--- a/include/asm-x86/pgalloc_64.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _X86_64_PGALLOC_H
-#define _X86_64_PGALLOC_H
-
-#include <asm/pda.h>
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
-}
-
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
-{
-	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
-}
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pud_free(struct mm_struct *mm, pud_t *pud)
-{
-	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
-	free_page((unsigned long)pud);
-}
-
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
-
-#endif /* _X86_64_PGALLOC_H */

[PATCH 09 of 31] x86: move all the pgd_list handling to one place

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/pgtable.c |   28 +++++++---------------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -43,34 +43,31 @@
 #endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
-#ifdef CONFIG_X86_64
 static inline void pgd_list_add(pgd_t *pgd)
 {
 	struct page *page = virt_to_page(pgd);
-	unsigned long flags;
 
-	spin_lock_irqsave(&pgd_lock, flags);
 	list_add(&page->lru, &pgd_list);
-	spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
 static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *page = virt_to_page(pgd);
-	unsigned long flags;
 
-	spin_lock_irqsave(&pgd_lock, flags);
 	list_del(&page->lru);
-	spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
+#ifdef CONFIG_X86_64
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	unsigned boundary;
 	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+	unsigned long flags;
 	if (!pgd)
 		return NULL;
+	spin_lock_irqsave(&pgd_lock, flags);
 	pgd_list_add(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
 	/*
 	 * Copy kernel pointers in from init.
 	 * Could keep a freelist or slab cache of those because the kernel
@@ -86,8 +83,11 @@
 
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
+	unsigned long flags;
 	BUG_ON((unsigned long)pgd & (PAGE_SIZE-1));
+	spin_lock_irqsave(&pgd_lock, flags);
 	pgd_list_del(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
 	free_page((unsigned long)pgd);
 }
 #else
@@ -101,20 +101,6 @@
  * vmalloc faults work because attached pagetables are never freed.
  * -- wli
  */
-static inline void pgd_list_add(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-
-	list_add(&page->lru, &pgd_list);
-}
-
-static inline void pgd_list_del(pgd_t *pgd)
-{
-	struct page *page = virt_to_page(pgd);
-
-	list_del(&page->lru);
-}
-
 #define UNSHARED_PTRS_PER_PGD				\
 	(SHARED_KERNEL_PMD ? USER_PTRS_PER_PGD : PTRS_PER_PGD)
 

[PATCH 10 of 31] x86: rename paravirt_alloc_pt etc after the pagetable structure

[Jeremy Fitzhardinge]

Rename (alloc|release)_(pt|pd) to pte/pmd to explicitly match the name
of the appropriate pagetable level structure.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/paravirt.c |   10 +++++-----
 arch/x86/kernel/vmi_32.c   |   20 ++++++++++----------
 arch/x86/mm/init_32.c      |    6 +++---
 arch/x86/mm/ioremap.c      |    2 +-
 arch/x86/mm/pageattr.c     |    2 +-
 arch/x86/mm/pgtable.c      |   16 ++++++++--------
 arch/x86/xen/enlighten.c   |   30 +++++++++++++++---------------
 include/asm-x86/paravirt.h |   32 ++++++++++++++++----------------
 include/asm-x86/pgalloc.h  |   18 +++++++++---------
 9 files changed, 68 insertions(+), 68 deletions(-)

diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -382,11 +382,11 @@
 	.flush_tlb_single = native_flush_tlb_single,
 	.flush_tlb_others = native_flush_tlb_others,
 
-	.alloc_pt = paravirt_nop,
-	.alloc_pd = paravirt_nop,
-	.alloc_pd_clone = paravirt_nop,
-	.release_pt = paravirt_nop,
-	.release_pd = paravirt_nop,
+	.alloc_pte = paravirt_nop,
+	.alloc_pmd = paravirt_nop,
+	.alloc_pmd_clone = paravirt_nop,
+	.release_pte = paravirt_nop,
+	.release_pmd = paravirt_nop,
 
 	.set_pte = native_set_pte,
 	.set_pte_at = native_set_pte_at,
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -392,13 +392,13 @@
 }
 #endif
 
-static void vmi_allocate_pt(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
 }
 
-static void vmi_allocate_pd(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn)
 {
  	/*
 	 * This call comes in very early, before mem_map is setup.
@@ -409,20 +409,20 @@
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
 }
 
-static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
+static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
 {
  	vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
 	vmi_check_page_type(clonepfn, VMI_PAGE_L2);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
 }
 
-static void vmi_release_pt(u32 pfn)
+static void vmi_release_pte(u32 pfn)
 {
 	vmi_ops.release_page(pfn, VMI_PAGE_L1);
 	vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
 }
 
-static void vmi_release_pd(u32 pfn)
+static void vmi_release_pmd(u32 pfn)
 {
 	vmi_ops.release_page(pfn, VMI_PAGE_L2);
 	vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
@@ -871,15 +871,15 @@
 
 	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
 	if (vmi_ops.allocate_page) {
-		pv_mmu_ops.alloc_pt = vmi_allocate_pt;
-		pv_mmu_ops.alloc_pd = vmi_allocate_pd;
-		pv_mmu_ops.alloc_pd_clone = vmi_allocate_pd_clone;
+		pv_mmu_ops.alloc_pte = vmi_allocate_pte;
+		pv_mmu_ops.alloc_pmd = vmi_allocate_pmd;
+		pv_mmu_ops.alloc_pmd_clone = vmi_allocate_pmd_clone;
 	}
 
 	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
 	if (vmi_ops.release_page) {
-		pv_mmu_ops.release_pt = vmi_release_pt;
-		pv_mmu_ops.release_pd = vmi_release_pd;
+		pv_mmu_ops.release_pte = vmi_release_pte;
+		pv_mmu_ops.release_pmd = vmi_release_pmd;
 	}
 
 	/* Set linear is needed in all cases */
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -69,7 +69,7 @@
 	if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
 		pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
 
-		paravirt_alloc_pd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT);
+		paravirt_alloc_pmd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT);
 		set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
 		pud = pud_offset(pgd, 0);
 		BUG_ON(pmd_table != pmd_offset(pud, 0));
@@ -98,7 +98,7 @@
 				(pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
 		}
 
-		paravirt_alloc_pt(&init_mm, __pa(page_table) >> PAGE_SHIFT);
+		paravirt_alloc_pte(&init_mm, __pa(page_table) >> PAGE_SHIFT);
 		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
 		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
 	}
@@ -375,7 +375,7 @@
 
 		pte_clear(NULL, va, pte);
 	}
-	paravirt_alloc_pd(&init_mm, __pa(base) >> PAGE_SHIFT);
+	paravirt_alloc_pmd(&init_mm, __pa(base) >> PAGE_SHIFT);
 }
 
 void __init native_pagetable_setup_done(pgd_t *base)
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -355,7 +355,7 @@
 
 	pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
 	pmd_clear(pmd);
-	paravirt_release_pt(__pa(bm_pte) >> PAGE_SHIFT);
+	paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT);
 	__flush_tlb_all();
 }
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -479,7 +479,7 @@
 		goto out_unlock;
 
 	pbase = (pte_t *)page_address(base);
-	paravirt_alloc_pt(&init_mm, page_to_pfn(base));
+	paravirt_alloc_pte(&init_mm, page_to_pfn(base));
 	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -24,14 +24,14 @@
 void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
-	paravirt_release_pt(page_to_pfn(pte));
+	paravirt_release_pte(page_to_pfn(pte));
 	tlb_remove_page(tlb, pte);
 }
 
 #if PAGETABLE_LEVELS > 2
 void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
-	paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT);
+	paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pmd));
 }
 
@@ -122,10 +122,10 @@
 		clone_pgd_range(pgd + USER_PTRS_PER_PGD,
 				swapper_pg_dir + USER_PTRS_PER_PGD,
 				KERNEL_PGD_PTRS);
-		paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT,
-					__pa(swapper_pg_dir) >> PAGE_SHIFT,
-					USER_PTRS_PER_PGD,
-					KERNEL_PGD_PTRS);
+		paravirt_alloc_pmd_clone(__pa(pgd) >> PAGE_SHIFT,
+					 __pa(swapper_pg_dir) >> PAGE_SHIFT,
+					 USER_PTRS_PER_PGD,
+					 KERNEL_PGD_PTRS);
 	}
 
 	/* list required to sync kernel mapping updates */
@@ -166,7 +166,7 @@
 
 			pgdp[i] = native_make_pgd(0);
 
-			paravirt_release_pd(pgd_val(pgd) >> PAGE_SHIFT);
+			paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT);
 			pmd_free(mm, pmd);
 		}
 	}
@@ -224,7 +224,7 @@
 {
 	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 
-	/* so that alloc_pd can use it */
+	/* so that alloc_pmd can use it */
 	mm->pgd = pgd;
 	if (pgd)
 		pgd_ctor(pgd);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -655,15 +655,15 @@
 
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
-static __init void xen_alloc_pt_init(struct mm_struct *mm, u32 pfn)
+static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
 {
 	BUG_ON(mem_map);	/* should only be used early */
 	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
 }
 
-/* Early release_pt assumes that all pts are pinned, since there's
+/* Early release_pte assumes that all pts are pinned, since there's
    only init_mm and anything attached to that is pinned. */
-static void xen_release_pt_init(u32 pfn)
+static void xen_release_pte_init(u32 pfn)
 {
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
@@ -696,18 +696,18 @@
 	}
 }
 
-static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pte(struct mm_struct *mm, u32 pfn)
 {
 	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
 }
 
-static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
 {
 	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
 }
 
 /* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_pte(u32 pfn)
 {
 	struct page *page = pfn_to_page(pfn);
 
@@ -836,10 +836,10 @@
 {
 	/* This will work as long as patching hasn't happened yet
 	   (which it hasn't) */
-	pv_mmu_ops.alloc_pt = xen_alloc_pt;
-	pv_mmu_ops.alloc_pd = xen_alloc_pd;
-	pv_mmu_ops.release_pt = xen_release_pt;
-	pv_mmu_ops.release_pd = xen_release_pt;
+	pv_mmu_ops.alloc_pte = xen_alloc_pte;
+	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+	pv_mmu_ops.release_pte = xen_release_pte;
+	pv_mmu_ops.release_pmd = xen_release_pte;
 	pv_mmu_ops.set_pte = xen_set_pte;
 
 	setup_shared_info();
@@ -1046,11 +1046,11 @@
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
-	.alloc_pt = xen_alloc_pt_init,
-	.release_pt = xen_release_pt_init,
-	.alloc_pd = xen_alloc_pt_init,
-	.alloc_pd_clone = paravirt_nop,
-	.release_pd = xen_release_pt_init,
+	.alloc_pte = xen_alloc_pte_init,
+	.release_pte = xen_release_pte_init,
+	.alloc_pmd = xen_alloc_pte_init,
+	.alloc_pmd_clone = paravirt_nop,
+	.release_pmd = xen_release_pte_init,
 
 #ifdef CONFIG_HIGHPTE
 	.kmap_atomic_pte = xen_kmap_atomic_pte,
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -220,11 +220,11 @@
 				 unsigned long va);
 
 	/* Hooks for allocating/releasing pagetable pages */
-	void (*alloc_pt)(struct mm_struct *mm, u32 pfn);
-	void (*alloc_pd)(struct mm_struct *mm, u32 pfn);
-	void (*alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
-	void (*release_pt)(u32 pfn);
-	void (*release_pd)(u32 pfn);
+	void (*alloc_pte)(struct mm_struct *mm, u32 pfn);
+	void (*alloc_pmd)(struct mm_struct *mm, u32 pfn);
+	void (*alloc_pmd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
+	void (*release_pte)(u32 pfn);
+	void (*release_pmd)(u32 pfn);
 
 	/* Pagetable manipulation functions */
 	void (*set_pte)(pte_t *ptep, pte_t pteval);
@@ -894,28 +894,28 @@
 	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
 }
 
-static inline void paravirt_alloc_pt(struct mm_struct *mm, unsigned pfn)
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned pfn)
 {
-	PVOP_VCALL2(pv_mmu_ops.alloc_pt, mm, pfn);
+	PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
 }
-static inline void paravirt_release_pt(unsigned pfn)
+static inline void paravirt_release_pte(unsigned pfn)
 {
-	PVOP_VCALL1(pv_mmu_ops.release_pt, pfn);
+	PVOP_VCALL1(pv_mmu_ops.release_pte, pfn);
 }
 
-static inline void paravirt_alloc_pd(struct mm_struct *mm, unsigned pfn)
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned pfn)
 {
-	PVOP_VCALL2(pv_mmu_ops.alloc_pd, mm, pfn);
+	PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
 }
 
-static inline void paravirt_alloc_pd_clone(unsigned pfn, unsigned clonepfn,
-					   unsigned start, unsigned count)
+static inline void paravirt_alloc_pmd_clone(unsigned pfn, unsigned clonepfn,
+					    unsigned start, unsigned count)
 {
-	PVOP_VCALL4(pv_mmu_ops.alloc_pd_clone, pfn, clonepfn, start, count);
+	PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
 }
-static inline void paravirt_release_pd(unsigned pfn)
+static inline void paravirt_release_pmd(unsigned pfn)
 {
-	PVOP_VCALL1(pv_mmu_ops.release_pd, pfn);
+	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
 }
 
 #ifdef CONFIG_HIGHPTE
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -8,11 +8,11 @@
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-#define paravirt_alloc_pt(mm, pfn) do { } while (0)
-#define paravirt_alloc_pd(mm, pfn) do { } while (0)
-#define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) do { } while (0)
-#define paravirt_release_pt(pfn) do { } while (0)
-#define paravirt_release_pd(pfn) do { } while (0)
+#define paravirt_alloc_pte(mm, pfn) do { } while (0)
+#define paravirt_alloc_pmd(mm, pfn) do { } while (0)
+#define paravirt_alloc_pmd_clone(pfn, clonepfn, start, count) do { } while (0)
+#define paravirt_release_pte(pfn) do { } while (0)
+#define paravirt_release_pmd(pfn) do { } while (0)
 #endif
 
 /*
@@ -43,7 +43,7 @@
 static inline void pmd_populate_kernel(struct mm_struct *mm,
 				       pmd_t *pmd, pte_t *pte)
 {
-	paravirt_alloc_pt(mm, __pa(pte) >> PAGE_SHIFT);
+	paravirt_alloc_pte(mm, __pa(pte) >> PAGE_SHIFT);
 	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
 }
 
@@ -52,7 +52,7 @@
 {
 	unsigned long pfn = page_to_pfn(pte);
 
-	paravirt_alloc_pt(mm, pfn);
+	paravirt_alloc_pte(mm, pfn);
 	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
 }
 
@@ -75,7 +75,7 @@
 #ifdef CONFIG_X86_PAE
 static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
 {
-	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
+	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
 
 	/* Note: almost everything apart from _PAGE_PRESENT is
 	   reserved at the pmd (PDPT) level. */
@@ -93,7 +93,7 @@
 #else	/* !CONFIG_X86_PAE */
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
-	paravirt_alloc_pd(mm, __pa(pmd) >> PAGE_SHIFT);
+	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
 	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
 }
 #endif	/* CONFIG_X86_PAE */

[PATCH 11 of 31] x86: add pud_alloc for 4-level pagetables

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/paravirt.c |    2 ++
 arch/x86/mm/pgtable.c      |    1 +
 include/asm-x86/paravirt.h |   11 +++++++++++
 include/asm-x86/pgalloc.h  |    3 +++
 4 files changed, 17 insertions(+)

diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -385,8 +385,10 @@
 	.alloc_pte = paravirt_nop,
 	.alloc_pmd = paravirt_nop,
 	.alloc_pmd_clone = paravirt_nop,
+	.alloc_pud = paravirt_nop,
 	.release_pte = paravirt_nop,
 	.release_pmd = paravirt_nop,
+	.release_pud = paravirt_nop,
 
 	.set_pte = native_set_pte,
 	.set_pte_at = native_set_pte_at,
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -38,6 +38,7 @@
 #if PAGETABLE_LEVELS > 3
 void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
+	paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pud));
 }
 #endif	/* PAGETABLE_LEVELS > 3 */
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -223,8 +223,10 @@
 	void (*alloc_pte)(struct mm_struct *mm, u32 pfn);
 	void (*alloc_pmd)(struct mm_struct *mm, u32 pfn);
 	void (*alloc_pmd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
+	void (*alloc_pud)(struct mm_struct *mm, u32 pfn);
 	void (*release_pte)(u32 pfn);
 	void (*release_pmd)(u32 pfn);
+	void (*release_pud)(u32 pfn);
 
 	/* Pagetable manipulation functions */
 	void (*set_pte)(pte_t *ptep, pte_t pteval);
@@ -918,6 +920,15 @@
 	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
 }
 
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pud, mm, pfn);
+}
+static inline void paravirt_release_pud(unsigned pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
+}
+
 #ifdef CONFIG_HIGHPTE
 static inline void *kmap_atomic_pte(struct page *page, enum km_type type)
 {
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -11,8 +11,10 @@
 #define paravirt_alloc_pte(mm, pfn) do { } while (0)
 #define paravirt_alloc_pmd(mm, pfn) do { } while (0)
 #define paravirt_alloc_pmd_clone(pfn, clonepfn, start, count) do { } while (0)
+#define paravirt_alloc_pud(mm, pfn) do { } while (0)
 #define paravirt_release_pte(pfn) do { } while (0)
 #define paravirt_release_pmd(pfn) do { } while (0)
+#define paravirt_release_pud(pfn) do { } while (0)
 #endif
 
 /*
@@ -101,6 +103,7 @@
 #if PAGETABLE_LEVELS > 3
 static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
 {
+	paravirt_alloc_pud(mm, __pa(pud) >> PAGE_SHIFT);
 	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
 }
 

[PATCH 12 of 31] x86/pgtable.h: demacro ptep_set_access_flags

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/pgtable.c     |   16 ++++++++++++++++
 include/asm-x86/pgtable.h |   13 +++----------
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -1,5 +1,6 @@
 #include <linux/mm.h>
 #include <asm/pgalloc.h>
+#include <asm/pgtable.h>
 #include <asm/tlb.h>
 
 pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
@@ -246,3 +247,18 @@
 	free_page((unsigned long)pgd);
 }
 #endif
+
+int ptep_set_access_flags(struct vm_area_struct *vma,
+			  unsigned long address, pte_t *ptep,
+			  pte_t entry, int dirty)
+{
+	int changed = !pte_same(*ptep, entry);
+
+	if (changed && dirty) {
+		*ptep = entry;
+		pte_update_defer(vma->vm_mm, address, ptep);
+		flush_tlb_page(vma, address);
+	}
+
+	return changed;
+}
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -299,16 +299,9 @@
  * bit at the same time.
  */
 #define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(vma, address, ptep, entry, dirty)		\
-({									\
-	int __changed = !pte_same(*(ptep), entry);			\
-	if (__changed && dirty) {					\
-		*ptep = entry;						\
-		pte_update_defer((vma)->vm_mm, (address), (ptep));	\
-		flush_tlb_page(vma, address);				\
-	}								\
-	__changed;							\
-})
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
 #define ptep_test_and_clear_young(vma, addr, ptep) ({			\

[PATCH 13 of 31] x86/pgtable.h: demacro ptep_test_and_clear_young

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/pgtable.c     |   15 +++++++++++++++
 include/asm-x86/pgtable.h |   11 ++---------
 2 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -262,3 +262,18 @@
 
 	return changed;
 }
+
+int ptep_test_and_clear_young(struct vm_area_struct *vma,
+			      unsigned long addr, pte_t *ptep)
+{
+	int ret = 0;
+
+	if (pte_young(*ptep))
+		ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
+					 &ptep->pte);
+
+	if (ret)
+		pte_update(vma->vm_mm, addr, ptep);
+
+	return ret;
+}
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -304,15 +304,8 @@
 				 pte_t entry, int dirty);
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(vma, addr, ptep) ({			\
-	int __ret = 0;							\
-	if (pte_young(*(ptep)))						\
-		__ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,		\
-					   &(ptep)->pte);		\
-	if (__ret)							\
-		pte_update((vma)->vm_mm, addr, ptep);			\
-	__ret;								\
-})
+extern int ptep_test_and_clear_young(struct vm_area_struct *vma,
+				     unsigned long addr, pte_t *ptep);
 
 #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
 #define ptep_clear_flush_young(vma, address, ptep)			\

[PATCH 14 of 31] x86/pgtable.h: demacro ptep_clear_flush_young

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/pgtable.c     |   12 ++++++++++++
 include/asm-x86/pgtable.h |   10 ++--------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -277,3 +277,15 @@
 
 	return ret;
 }
+
+int ptep_clear_flush_young(struct vm_area_struct *vma,
+			   unsigned long address, pte_t *ptep)
+{
+	int young;
+
+	young = ptep_test_and_clear_young(vma, address, ptep);
+	if (young)
+		flush_tlb_page(vma, address);
+
+	return young;
+}
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -308,14 +308,8 @@
 				     unsigned long addr, pte_t *ptep);
 
 #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(vma, address, ptep)			\
-({									\
-	int __young;							\
-	__young = ptep_test_and_clear_young((vma), (address), (ptep));	\
-	if (__young)							\
-		flush_tlb_page(vma, address);				\
-	__young;							\
-})
+extern int ptep_clear_flush_young(struct vm_area_struct *vma,
+				  unsigned long address, pte_t *ptep);
 
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)

[PATCH 15 of 31] x86: demacro pgalloc paravirt stubs

[Jeremy Fitzhardinge]

Turn paravirt stubs into inline functions, so that the arguments are
still typechecked.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

---
 include/asm-x86/pgalloc.h |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -8,13 +8,14 @@
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-#define paravirt_alloc_pte(mm, pfn) do { } while (0)
-#define paravirt_alloc_pmd(mm, pfn) do { } while (0)
-#define paravirt_alloc_pmd_clone(pfn, clonepfn, start, count) do { } while (0)
-#define paravirt_alloc_pud(mm, pfn) do { } while (0)
-#define paravirt_release_pte(pfn) do { } while (0)
-#define paravirt_release_pmd(pfn) do { } while (0)
-#define paravirt_release_pud(pfn) do { } while (0)
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+					    unsigned long start, unsigned long count) {}
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_release_pte(unsigned long pfn) {}
+static inline void paravirt_release_pmd(unsigned long pfn) {}
+static inline void paravirt_release_pud(unsigned long pfn) {}
 #endif
 
 /*

[PATCH 16 of 31] xen: use appropriate pte types

[Jeremy Fitzhardinge]

Convert Xen pagetable handling to use appropriate *val_t types.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -214,35 +214,35 @@
 	xen_set_pmd(pmdp, __pmd(0));
 }
 
-unsigned long long xen_pte_val(pte_t pte)
+pteval_t xen_pte_val(pte_t pte)
 {
-	unsigned long long ret = 0;
+	pteval_t ret = 0;
 
 	if (pte.pte_low) {
-		ret = ((unsigned long long)pte.pte_high << 32) | pte.pte_low;
+		ret = ((pteval_t)pte.pte_high << 32) | pte.pte_low;
 		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
 	}
 
 	return ret;
 }
 
-unsigned long long xen_pmd_val(pmd_t pmd)
+pmdval_t xen_pmd_val(pmd_t pmd)
 {
-	unsigned long long ret = pmd.pmd;
+	pmdval_t ret = pmd.pmd;
 	if (ret)
 		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
 	return ret;
 }
 
-unsigned long long xen_pgd_val(pgd_t pgd)
+pgdval_t xen_pgd_val(pgd_t pgd)
 {
-	unsigned long long ret = pgd.pgd;
+	pgdval_t ret = pgd.pgd;
 	if (ret)
 		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
 	return ret;
 }
 
-pte_t xen_make_pte(unsigned long long pte)
+pte_t xen_make_pte(pteval_t pte)
 {
 	if (pte & _PAGE_PRESENT) {
 		pte = phys_to_machine(XPADDR(pte)).maddr;
@@ -252,7 +252,7 @@
 	return (pte_t){ .pte = pte };
 }
 
-pmd_t xen_make_pmd(unsigned long long pmd)
+pmd_t xen_make_pmd(pmdval_t pmd)
 {
 	if (pmd & 1)
 		pmd = phys_to_machine(XPADDR(pmd)).maddr;
@@ -260,7 +260,7 @@
 	return (pmd_t){ pmd };
 }
 
-pgd_t xen_make_pgd(unsigned long long pgd)
+pgd_t xen_make_pgd(pgdval_t pgd)
 {
 	if (pgd & _PAGE_PRESENT)
 		pgd = phys_to_machine(XPADDR(pgd)).maddr;
@@ -273,9 +273,9 @@
 	*ptep = pte;
 }
 
-unsigned long xen_pte_val(pte_t pte)
+pteval_t xen_pte_val(pte_t pte)
 {
-	unsigned long ret = pte.pte_low;
+	pteval_t ret = pte.pte_low;
 
 	if (ret & _PAGE_PRESENT)
 		ret = machine_to_phys(XMADDR(ret)).paddr;
@@ -283,15 +283,15 @@
 	return ret;
 }
 
-unsigned long xen_pgd_val(pgd_t pgd)
+pgdval_t xen_pgd_val(pgd_t pgd)
 {
-	unsigned long ret = pgd.pgd;
+	pteval_t ret = pgd.pgd;
 	if (ret)
 		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
 	return ret;
 }
 
-pte_t xen_make_pte(unsigned long pte)
+pte_t xen_make_pte(pteval_t pte)
 {
 	if (pte & _PAGE_PRESENT) {
 		pte = phys_to_machine(XPADDR(pte)).maddr;
@@ -301,7 +301,7 @@
 	return (pte_t){ pte };
 }
 
-pgd_t xen_make_pgd(unsigned long pgd)
+pgd_t xen_make_pgd(pgdval_t pgd)
 {
 	if (pgd & _PAGE_PRESENT)
 		pgd = phys_to_machine(XPADDR(pgd)).maddr;

[PATCH 17 of 31] xen: make use of pte_t union

[Jeremy Fitzhardinge]

pte_t always contains a "pte" field for the whole pte value, so make
use of it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -216,12 +216,10 @@
 
 pteval_t xen_pte_val(pte_t pte)
 {
-	pteval_t ret = 0;
+	pteval_t ret = pte.pte;
 
-	if (pte.pte_low) {
-		ret = ((pteval_t)pte.pte_high << 32) | pte.pte_low;
-		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
-	}
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
 
 	return ret;
 }
@@ -229,16 +227,16 @@
 pmdval_t xen_pmd_val(pmd_t pmd)
 {
 	pmdval_t ret = pmd.pmd;
-	if (ret)
-		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
 	return ret;
 }
 
 pgdval_t xen_pgd_val(pgd_t pgd)
 {
 	pgdval_t ret = pgd.pgd;
-	if (ret)
-		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
 	return ret;
 }
 
@@ -254,7 +252,7 @@
 
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
-	if (pmd & 1)
+	if (pmd & _PAGE_PRESENT)
 		pmd = phys_to_machine(XPADDR(pmd)).maddr;
 
 	return (pmd_t){ pmd };
@@ -275,7 +273,7 @@
 
 pteval_t xen_pte_val(pte_t pte)
 {
-	pteval_t ret = pte.pte_low;
+	pteval_t ret = pte.pte;
 
 	if (ret & _PAGE_PRESENT)
 		ret = machine_to_phys(XMADDR(ret)).paddr;
@@ -286,8 +284,8 @@
 pgdval_t xen_pgd_val(pgd_t pgd)
 {
 	pteval_t ret = pgd.pgd;
-	if (ret)
-		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
 	return ret;
 }
 

[PATCH 18 of 31] xen: unify pte operations

[Jeremy Fitzhardinge]

We can fold the essentially common pte functions together now.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c |  125 ++++++++++++++++++----------------------------------
 1 file changed, 44 insertions(+), 81 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -171,6 +171,49 @@
 	xen_set_pte(ptep, pteval);
 }
 
+pteval_t xen_pte_val(pte_t pte)
+{
+	pteval_t ret = pte.pte;
+
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
+
+	return ret;
+}
+
+pgdval_t xen_pgd_val(pgd_t pgd)
+{
+	pgdval_t ret = pgd.pgd;
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
+	return ret;
+}
+
+pte_t xen_make_pte(pteval_t pte)
+{
+	if (pte & _PAGE_PRESENT) {
+		pte = phys_to_machine(XPADDR(pte)).maddr;
+		pte &= ~(_PAGE_PCD | _PAGE_PWT);
+	}
+
+	return (pte_t){ .pte = pte };
+}
+
+pgd_t xen_make_pgd(pgdval_t pgd)
+{
+	if (pgd & _PAGE_PRESENT)
+		pgd = phys_to_machine(XPADDR(pgd)).maddr;
+
+	return (pgd_t){ pgd };
+}
+
+pmdval_t xen_pmd_val(pmd_t pmd)
+{
+	pmdval_t ret = native_pmd_val(pmd);
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
+	return ret;
+}
 #ifdef CONFIG_X86_PAE
 void xen_set_pud(pud_t *ptr, pud_t val)
 {
@@ -214,97 +257,17 @@
 	xen_set_pmd(pmdp, __pmd(0));
 }
 
-pteval_t xen_pte_val(pte_t pte)
-{
-	pteval_t ret = pte.pte;
-
-	if (ret & _PAGE_PRESENT)
-		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
-
-	return ret;
-}
-
-pmdval_t xen_pmd_val(pmd_t pmd)
-{
-	pmdval_t ret = pmd.pmd;
-	if (ret & _PAGE_PRESENT)
-		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
-	return ret;
-}
-
-pgdval_t xen_pgd_val(pgd_t pgd)
-{
-	pgdval_t ret = pgd.pgd;
-	if (ret & _PAGE_PRESENT)
-		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
-	return ret;
-}
-
-pte_t xen_make_pte(pteval_t pte)
-{
-	if (pte & _PAGE_PRESENT) {
-		pte = phys_to_machine(XPADDR(pte)).maddr;
-		pte &= ~(_PAGE_PCD | _PAGE_PWT);
-	}
-
-	return (pte_t){ .pte = pte };
-}
-
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
 	if (pmd & _PAGE_PRESENT)
 		pmd = phys_to_machine(XPADDR(pmd)).maddr;
 
-	return (pmd_t){ pmd };
-}
-
-pgd_t xen_make_pgd(pgdval_t pgd)
-{
-	if (pgd & _PAGE_PRESENT)
-		pgd = phys_to_machine(XPADDR(pgd)).maddr;
-
-	return (pgd_t){ pgd };
+	return native_make_pmd(pmd);
 }
 #else  /* !PAE */
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
 	*ptep = pte;
-}
-
-pteval_t xen_pte_val(pte_t pte)
-{
-	pteval_t ret = pte.pte;
-
-	if (ret & _PAGE_PRESENT)
-		ret = machine_to_phys(XMADDR(ret)).paddr;
-
-	return ret;
-}
-
-pgdval_t xen_pgd_val(pgd_t pgd)
-{
-	pteval_t ret = pgd.pgd;
-	if (ret & _PAGE_PRESENT)
-		ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
-	return ret;
-}
-
-pte_t xen_make_pte(pteval_t pte)
-{
-	if (pte & _PAGE_PRESENT) {
-		pte = phys_to_machine(XPADDR(pte)).maddr;
-		pte &= ~(_PAGE_PCD | _PAGE_PWT);
-	}
-
-	return (pte_t){ pte };
-}
-
-pgd_t xen_make_pgd(pgdval_t pgd)
-{
-	if (pgd & _PAGE_PRESENT)
-		pgd = phys_to_machine(XPADDR(pgd)).maddr;
-
-	return (pgd_t){ pgd };
 }
 #endif	/* CONFIG_X86_PAE */
 

[PATCH 19 of 31] xen: use phys_addr_t when referring to physical addresses

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 include/xen/page.h |   16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/include/xen/page.h b/include/xen/page.h
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -8,27 +8,15 @@
 
 #include <xen/features.h>
 
-#ifdef CONFIG_X86_PAE
 /* Xen machine address */
 typedef struct xmaddr {
-	unsigned long long maddr;
+	phys_addr_t maddr;
 } xmaddr_t;
 
 /* Xen pseudo-physical address */
 typedef struct xpaddr {
-	unsigned long long paddr;
+	phys_addr_t paddr;
 } xpaddr_t;
-#else
-/* Xen machine address */
-typedef struct xmaddr {
-	unsigned long maddr;
-} xmaddr_t;
-
-/* Xen pseudo-physical address */
-typedef struct xpaddr {
-	unsigned long paddr;
-} xpaddr_t;
-#endif
 
 #define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
 #define XPADDR(x)	((xpaddr_t) { .paddr = (x) })

[PATCH 20 of 31] xen: unify pte operations on machine frames

[Jeremy Fitzhardinge]

Xen's pte operations on mfns can be unified like the kernel's pfn operations.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 include/xen/page.h |   30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/include/xen/page.h b/include/xen/page.h
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -125,37 +125,37 @@
 #define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
 #define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
-#ifdef CONFIG_X86_PAE
-#define pte_mfn(_pte) (((_pte).pte_low >> PAGE_SHIFT) |			\
-		       (((_pte).pte_high & 0xfff) << (32-PAGE_SHIFT)))
+static inline unsigned long pte_mfn(pte_t pte)
+{
+	return (pte.pte & ~_PAGE_NX) >> PAGE_SHIFT;
+}
 
 static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
 {
 	pte_t pte;
 
-	pte.pte_high = (page_nr >> (32 - PAGE_SHIFT)) |
-		(pgprot_val(pgprot) >> 32);
-	pte.pte_high &= (__supported_pte_mask >> 32);
-	pte.pte_low = ((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
-	pte.pte_low &= __supported_pte_mask;
+	pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
+		(pgprot_val(pgprot) & __supported_pte_mask);
 
 	return pte;
 }
 
-static inline unsigned long long pte_val_ma(pte_t x)
+static inline pteval_t pte_val_ma(pte_t pte)
 {
-	return x.pte;
+	return pte.pte;
 }
+
+static inline pte_t __pte_ma(pteval_t x)
+{
+	return (pte_t) { .pte = x };
+}
+
+#ifdef CONFIG_X86_PAE
 #define pmd_val_ma(v) ((v).pmd)
 #define pud_val_ma(v) ((v).pgd.pgd)
-#define __pte_ma(x)	((pte_t) { .pte = (x) })
 #define __pmd_ma(x)	((pmd_t) { (x) } )
 #else  /* !X86_PAE */
-#define pte_mfn(_pte) ((_pte).pte_low >> PAGE_SHIFT)
-#define mfn_pte(pfn, prot)	__pte_ma(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pte_val_ma(x)	((x).pte)
 #define pmd_val_ma(v)	((v).pud.pgd.pgd)
-#define __pte_ma(x)	((pte_t) { (x) } )
 #endif	/* CONFIG_X86_PAE */
 
 #define pgd_val_ma(x)	((x).pgd)

[PATCH 21 of 31] xen: make sure iret faults are trapped

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/entry_32.S |    2 +-
 arch/x86/xen/xen-asm.S     |    6 +++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -411,7 +411,7 @@
 irq_return:
 	INTERRUPT_RETURN
 .section .fixup,"ax"
-iret_exc:
+ENTRY(iret_exc)
 	pushl $0			# no error code
 	pushl $do_iret_error
 	jmp error_code
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -184,8 +184,12 @@
 	   region is OK. */
 	je xen_hypervisor_callback
 
-	iret
+1:	iret
 xen_iret_end_crit:
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
 
 hyper_iret:
 	/* put this out of line since its very rarely used */

[PATCH 22 of 31] x86: unify KERNEL_PGD_PTRS

[Jeremy Fitzhardinge]

Make KERNEL_PGD_PTRS common, as previously it was only being defined
for 32-bit.

There are a couple of follow-on changes from this:
 - KERNEL_PGD_PTRS was being defined in terms of USER_PGD_PTRS.  The
   definition of USER_PGD_PTRS doesn't really make much sense on x86-64,
   since it can have two different user address-space configurations.
   I renamed USER_PGD_PTRS to KERNEL_PGD_BOUNDARY, which is meaningful
   for all of 32/32, 32/64 and 64/64 process configurations.

 - USER_PTRS_PER_PGD was also defined and was being used for similar
   purposes.  Converting its users to KERNEL_PGD_BOUNDARY left it
   completely unused, and so I removed it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Zach Amsden <zach@vmware.com>
Cc: Ingo Molnar <mingo@elte.hu>

---
 arch/x86/kernel/reboot.c            |    4 ++--
 arch/x86/kernel/smpboot_32.c        |    4 ++--
 arch/x86/kernel/vmi_32.c            |    2 +-
 arch/x86/mach-voyager/voyager_smp.c |    4 ++--
 arch/x86/mm/init_32.c               |    2 +-
 arch/x86/mm/pgtable.c               |   12 ++++++------
 include/asm-x86/pgtable.h           |    4 +++-
 include/asm-x86/pgtable_32.h        |    3 ---
 8 files changed, 17 insertions(+), 18 deletions(-)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -8,6 +8,7 @@
 #include <asm/apic.h>
 #include <asm/desc.h>
 #include <asm/hpet.h>
+#include <asm/pgtable.h>
 #include <asm/reboot_fixups.h>
 #include <asm/reboot.h>
 
@@ -15,7 +16,6 @@
 # include <linux/dmi.h>
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
-# include <asm/pgtable.h>
 #else
 # include <asm/iommu.h>
 #endif
@@ -266,7 +266,7 @@
 	/* Remap the kernel at virtual address zero, as well as offset zero
 	   from the kernel segment.  This assumes the kernel segment starts at
 	   virtual address PAGE_OFFSET. */
-	memcpy(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+	memcpy(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
 		sizeof(swapper_pg_dir [0]) * KERNEL_PGD_PTRS);
 
 	/*
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot_32.c
@@ -782,8 +782,8 @@
 	INIT_WORK(&info.task, do_warm_boot_cpu);
 
 	/* init low mem mapping */
-	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
-			min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
+	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+			min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
 	flush_tlb_all();
 	schedule_work(&info.task);
 	wait_for_completion(&done);
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -320,7 +320,7 @@
 	 * pdes need to be zeroed.
 	 */
 	if (type & VMI_PAGE_CLONE)
-		limit = USER_PTRS_PER_PGD;
+		limit = KERNEL_PGD_BOUNDARY;
 	for (i = 0; i < limit; i++)
 		BUG_ON(ptr[i]);
 }
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -566,8 +566,8 @@
 		hijack_source.idt.Offset, stack_start.sp));
 
 	/* init lowmem identity mapping */
-	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
-			min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
+	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+			min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
 	flush_tlb_all();
 
 	if (quad_boot) {
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -467,7 +467,7 @@
 	 * Note that "pgd_clear()" doesn't do it for
 	 * us, because pgd_clear() is a no-op on i386.
 	 */
-	for (i = 0; i < USER_PTRS_PER_PGD; i++) {
+	for (i = 0; i < KERNEL_PGD_BOUNDARY; i++) {
 #ifdef CONFIG_X86_PAE
 		set_pgd(swapper_pg_dir+i, __pgd(1 + __pa(empty_zero_page)));
 #else
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -104,7 +104,7 @@
  * -- wli
  */
 #define UNSHARED_PTRS_PER_PGD				\
-	(SHARED_KERNEL_PMD ? USER_PTRS_PER_PGD : PTRS_PER_PGD)
+	(SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD)
 
 static void pgd_ctor(void *p)
 {
@@ -112,7 +112,7 @@
 	unsigned long flags;
 
 	/* Clear usermode parts of PGD */
-	memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
+	memset(pgd, 0, KERNEL_PGD_BOUNDARY*sizeof(pgd_t));
 
 	spin_lock_irqsave(&pgd_lock, flags);
 
@@ -121,12 +121,12 @@
 	   references from swapper_pg_dir. */
 	if (PAGETABLE_LEVELS == 2 ||
 	    (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD)) {
-		clone_pgd_range(pgd + USER_PTRS_PER_PGD,
-				swapper_pg_dir + USER_PTRS_PER_PGD,
+		clone_pgd_range(pgd + KERNEL_PGD_BOUNDARY,
+				swapper_pg_dir + KERNEL_PGD_BOUNDARY,
 				KERNEL_PGD_PTRS);
 		paravirt_alloc_pmd_clone(__pa(pgd) >> PAGE_SHIFT,
 					 __pa(swapper_pg_dir) >> PAGE_SHIFT,
-					 USER_PTRS_PER_PGD,
+					 KERNEL_PGD_BOUNDARY,
 					 KERNEL_PGD_PTRS);
 	}
 
@@ -201,7 +201,7 @@
 			return 0;
 		}
 
-		if (i >= USER_PTRS_PER_PGD)
+		if (i >= KERNEL_PGD_BOUNDARY)
 			memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]),
 			       sizeof(pmd_t) * PTRS_PER_PMD);
 
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_PGTABLE_H
 #define _ASM_X86_PGTABLE_H
 
-#define USER_PTRS_PER_PGD	((TASK_SIZE-1)/PGDIR_SIZE+1)
 #define FIRST_USER_ADDRESS	0
 
 #define _PAGE_BIT_PRESENT	0
@@ -240,6 +239,9 @@
 # include "pgtable_64.h"
 #endif
 
+#define KERNEL_PGD_BOUNDARY	pgd_index(PAGE_OFFSET)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - KERNEL_PGD_BOUNDARY)
+
 #ifndef __ASSEMBLY__
 
 enum {
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -47,9 +47,6 @@
 
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
 
 /* Just any arbitrary offset to the start of the vmalloc VM area: the
  * current 8MB value just means that there will be a 8MB "hole" after the

[PATCH 23 of 31] x86: unify pgd ctor/dtor

[Jeremy Fitzhardinge]

All pagetables need fundamentally the same setup and destruction, so
just use the same code for everything.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andi Kleen <ak@suse.de>
---
 arch/x86/mm/pgtable.c        |   59 +++++++++---------------------------------
 include/asm-x86/pgtable.h    |   16 +++++++++++
 include/asm-x86/pgtable_32.h |   15 ----------
 include/asm-x86/pgtable_64.h |    2 -
 4 files changed, 30 insertions(+), 62 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -59,50 +59,6 @@
 	list_del(&page->lru);
 }
 
-#ifdef CONFIG_X86_64
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	unsigned boundary;
-	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
-	unsigned long flags;
-	if (!pgd)
-		return NULL;
-	spin_lock_irqsave(&pgd_lock, flags);
-	pgd_list_add(pgd);
-	spin_unlock_irqrestore(&pgd_lock, flags);
-	/*
-	 * Copy kernel pointers in from init.
-	 * Could keep a freelist or slab cache of those because the kernel
-	 * part never changes.
-	 */
-	boundary = pgd_index(__PAGE_OFFSET);
-	memset(pgd, 0, boundary * sizeof(pgd_t));
-	memcpy(pgd + boundary,
-	       init_level4_pgt + boundary,
-	       (PTRS_PER_PGD - boundary) * sizeof(pgd_t));
-	return pgd;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	unsigned long flags;
-	BUG_ON((unsigned long)pgd & (PAGE_SIZE-1));
-	spin_lock_irqsave(&pgd_lock, flags);
-	pgd_list_del(pgd);
-	spin_unlock_irqrestore(&pgd_lock, flags);
-	free_page((unsigned long)pgd);
-}
-#else
-/*
- * List of all pgd's needed for non-PAE so it can invalidate entries
- * in both cached and uncached pgd's; not needed for PAE since the
- * kernel pmd is shared. If PAE were not to share the pmd a similar
- * tactic would be needed. This is essentially codepath-based locking
- * against pageattr.c; it is the unique case in which a valid change
- * of kernel pagetables can't be lazily synchronized by vmalloc faults.
- * vmalloc faults work because attached pagetables are never freed.
- * -- wli
- */
 #define UNSHARED_PTRS_PER_PGD				\
 	(SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD)
 
@@ -120,7 +76,8 @@
 	   ptes in non-PAE, or shared PMD in PAE), then just copy the
 	   references from swapper_pg_dir. */
 	if (PAGETABLE_LEVELS == 2 ||
-	    (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD)) {
+	    (PAGETABLE_LEVELS == 3 && SHARED_KERNEL_PMD) ||
+	    PAGETABLE_LEVELS == 4) {
 		clone_pgd_range(pgd + KERNEL_PGD_BOUNDARY,
 				swapper_pg_dir + KERNEL_PGD_BOUNDARY,
 				KERNEL_PGD_PTRS);
@@ -148,6 +105,17 @@
 	pgd_list_del(pgd);
 	spin_unlock_irqrestore(&pgd_lock, flags);
 }
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * -- wli
+ */
 
 #ifdef CONFIG_X86_PAE
 /*
@@ -246,7 +214,6 @@
 	pgd_dtor(pgd);
 	free_page((unsigned long)pgd);
 }
-#endif
 
 int ptep_set_access_flags(struct vm_area_struct *vma,
 			  unsigned long address, pte_t *ptep,
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -344,6 +344,22 @@
 	pte_update(mm, addr, ptep);
 }
 
+/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ *  dst - pointer to pgd range anwhere on a pgd page
+ *  src - ""
+ *  count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+       memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+
 #include <asm-generic/pgtable.h>
 #endif	/* __ASSEMBLY__ */
 
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -104,21 +104,6 @@
 #else
 # include <asm/pgtable-2level.h>
 #endif
-
-/*
- * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
- *
- *  dst - pointer to pgd range anwhere on a pgd page
- *  src - ""
- *  count - the number of pgds to copy.
- *
- * dst and src can be on the same page, but the range must not overlap,
- * and must not cross a page boundary.
- */
-static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
-{
-       memcpy(dst, src, count * sizeof(pgd_t));
-}
 
 /*
  * Macro to mark a page protection value as "uncacheable".  On processors which do not support
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -24,7 +24,7 @@
 
 #endif /* !__ASSEMBLY__ */
 
-#define SHARED_KERNEL_PMD	1
+#define SHARED_KERNEL_PMD	0
 
 /*
  * PGDIR_SHIFT determines what a top-level page table entry can map

[PATCH 24 of 31] xen: add support for callbackops hypercall

[Jeremy Fitzhardinge]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

---
 include/asm-x86/xen/hypercall.h  |    6 ++
 include/asm-x86/xen/interface.h  |    4 +
 include/xen/interface/callback.h |  102 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 112 insertions(+)

diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
--- a/include/asm-x86/xen/hypercall.h
+++ b/include/asm-x86/xen/hypercall.h
@@ -161,6 +161,12 @@
 	return _hypercall4(int, set_callbacks,
 			   event_selector, event_address,
 			   failsafe_selector, failsafe_address);
+}
+
+static inline int
+HYPERVISOR_callback_op(int cmd, void *arg)
+{
+	return _hypercall2(int, callback_op, cmd, arg);
 }
 
 static inline int
diff --git a/include/asm-x86/xen/interface.h b/include/asm-x86/xen/interface.h
--- a/include/asm-x86/xen/interface.h
+++ b/include/asm-x86/xen/interface.h
@@ -171,6 +171,10 @@
     unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
 };
 
+struct xen_callback {
+	unsigned long cs;
+	unsigned long eip;
+};
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/include/xen/interface/callback.h b/include/xen/interface/callback.h
new file mode 100644
--- /dev/null
+++ b/include/xen/interface/callback.h
@@ -0,0 +1,102 @@
+/******************************************************************************
+ * callback.h
+ *
+ * Register guest OS callbacks with Xen.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2006, Ian Campbell
+ */
+
+#ifndef __XEN_PUBLIC_CALLBACK_H__
+#define __XEN_PUBLIC_CALLBACK_H__
+
+#include "xen.h"
+
+/*
+ * Prototype for this hypercall is:
+ *   long callback_op(int cmd, void *extra_args)
+ * @cmd        == CALLBACKOP_??? (callback operation).
+ * @extra_args == Operation-specific extra arguments (NULL if none).
+ */
+
+/* ia64, x86: Callback for event delivery. */
+#define CALLBACKTYPE_event                 0
+
+/* x86: Failsafe callback when guest state cannot be restored by Xen. */
+#define CALLBACKTYPE_failsafe              1
+
+/* x86/64 hypervisor: Syscall by 64-bit guest app ('64-on-64-on-64'). */
+#define CALLBACKTYPE_syscall               2
+
+/*
+ * x86/32 hypervisor: Only available on x86/32 when supervisor_mode_kernel
+ *     feature is enabled. Do not use this callback type in new code.
+ */
+#define CALLBACKTYPE_sysenter_deprecated   3
+
+/* x86: Callback for NMI delivery. */
+#define CALLBACKTYPE_nmi                   4
+
+/*
+ * x86: sysenter is only available as follows:
+ * - 32-bit hypervisor: with the supervisor_mode_kernel feature enabled
+ * - 64-bit hypervisor: 32-bit guest applications on Intel CPUs
+ *                      ('32-on-32-on-64', '32-on-64-on-64')
+ *                      [nb. also 64-bit guest applications on Intel CPUs
+ *                           ('64-on-64-on-64'), but syscall is preferred]
+ */
+#define CALLBACKTYPE_sysenter              5
+
+/*
+ * x86/64 hypervisor: Syscall by 32-bit guest app on AMD CPUs
+ *                    ('32-on-32-on-64', '32-on-64-on-64')
+ */
+#define CALLBACKTYPE_syscall32             7
+
+/*
+ * Disable event deliver during callback? This flag is ignored for event and
+ * NMI callbacks: event delivery is unconditionally disabled.
+ */
+#define _CALLBACKF_mask_events             0
+#define CALLBACKF_mask_events              (1U << _CALLBACKF_mask_events)
+
+/*
+ * Register a callback.
+ */
+#define CALLBACKOP_register                0
+struct callback_register {
+    uint16_t type;
+    uint16_t flags;
+    struct xen_callback address;
+};
+
+/*
+ * Unregister a callback.
+ *
+ * Not all callbacks can be unregistered. -EINVAL will be returned if
+ * you attempt to unregister such a callback.
+ */
+#define CALLBACKOP_unregister              1
+struct callback_unregister {
+    uint16_t type;
+    uint16_t _unused;
+};
+
+#endif /* __XEN_PUBLIC_CALLBACK_H__ */

[PATCH 25 of 31] x86: only enable interrupts when kernel state has been set up

[Jeremy Fitzhardinge]

The sysenter path tries to enable interrupts immediately.  Unfortunately
this doesn't work in a paravirt environment, because not enough kernel
state has been set up at that point (namely, pointing %fs to the kernel
percpu data segment).  To fix this, defer ENABLE_INTERRUPTS until after
the kernel state has been set up.

Unfortunately this means that we're running with interrupts disabled
for a while without calling the IRQ tracing code, but that can't be
called without setting up %fs either.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/entry_32.S |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -290,10 +290,10 @@
 	movl TSS_sysenter_sp0(%esp),%esp
 ENTRY(sysenter_past_esp)
 	/*
-	 * No need to follow this irqs on/off section: the syscall
-	 * disabled irqs and here we enable it straight after entry:
+	 * Interrupts are disabled here, but we can't trace it until
+	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
+	 * we immediately enable interrupts at that point anyway.
 	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushl $(__USER_DS)
 	CFI_ADJUST_CFA_OFFSET 4
 	/*CFI_REL_OFFSET ss, 0*/
@@ -329,6 +329,7 @@
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
@@ -545,6 +546,7 @@
 	pushl %eax			# save orig_eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	GET_THREAD_INFO(%ebp)
 	movl $-EFAULT,PT_EAX(%esp)
 	jmp resume_userspace

[PATCH 26 of 31] xen: support sysenter/sysexit if hypervisor does

[Jeremy Fitzhardinge]

64-bit Xen supports sysenter for 32-bit guests, so support its
use.  (sysenter is faster than int $0x80 in 32-on-64.)

sysexit is still not supported, so we fake it up using iret.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/entry_32.S |   18 +++++++++++++-
 arch/x86/xen/enlighten.c   |    3 --
 arch/x86/xen/setup.c       |   21 ++++++++++++++++
 arch/x86/xen/smp.c         |    1
 arch/x86/xen/xen-asm.S     |   56 ++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/xen-ops.h     |    3 ++
 6 files changed, 99 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1024,6 +1024,13 @@
 ENDPROC(kernel_thread_helper)
 
 #ifdef CONFIG_XEN
+/* Xen doesn't set %esp to be precisely what the normal sysenter
+   entrypoint expects, so fix it up before using the normal path. */
+ENTRY(xen_sysenter_target)
+	RING0_INT_FRAME
+	addl $5*4, %esp		/* remove xen-provided frame */
+	jmp sysenter_past_esp
+
 ENTRY(xen_hypervisor_callback)
 	CFI_STARTPROC
 	pushl $0
@@ -1043,8 +1050,17 @@
 	jae  1f
 
 	call xen_iret_crit_fixup
+	jmp  2f
 
-1:	mov %esp, %eax
+1:	cmpl $xen_sysexit_start_crit,%eax
+	jb   2f
+	cmpl $xen_sysexit_end_crit,%eax
+	jae  2f
+
+	jmp xen_sysexit_crit_fixup
+
+ENTRY(xen_do_upcall)
+2:	mov %esp, %eax
 	call xen_evtchn_do_upcall
 	jmp  ret_from_intr
 	CFI_ENDPROC
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -155,7 +155,6 @@
 	if (*ax == 1)
 		maskedx = ~((1 << X86_FEATURE_APIC) |  /* disable APIC */
 			    (1 << X86_FEATURE_ACPI) |  /* disable ACPI */
-			    (1 << X86_FEATURE_SEP)  |  /* disable SEP */
 			    (1 << X86_FEATURE_ACC));   /* thermal monitoring */
 
 	asm(XEN_EMULATE_PREFIX "cpuid"
@@ -981,7 +980,7 @@
 	.read_pmc = native_read_pmc,
 
 	.iret = xen_iret,
-	.irq_enable_syscall_ret = NULL,  /* never called */
+	.irq_enable_syscall_ret = xen_sysexit,
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -16,6 +16,7 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 
+#include <xen/interface/callback.h>
 #include <xen/interface/physdev.h>
 #include <xen/features.h>
 
@@ -68,6 +69,24 @@
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
 }
 
+void xen_enable_sysenter(void)
+{
+	int cpu = smp_processor_id();
+	extern void xen_sysenter_target(void);
+	/* Mask events on entry, even though they get enabled immediately */
+	static struct callback_register sysenter = {
+		.type = CALLBACKTYPE_sysenter,
+		.address = { __KERNEL_CS, (unsigned long)xen_sysenter_target },
+		.flags = CALLBACKF_mask_events,
+	};
+
+	if (!boot_cpu_has(X86_FEATURE_SEP) ||
+	    HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) {
+		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
+	}
+}
+
 void __init xen_arch_setup(void)
 {
 	struct physdev_set_iopl set_iopl;
@@ -81,6 +100,8 @@
 
 	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
 				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+
+	xen_enable_sysenter();
 
 	set_iopl.iopl = 1;
 	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -72,6 +72,7 @@
 	int cpu = smp_processor_id();
 
 	cpu_init();
+	xen_enable_sysenter();
 
 	preempt_disable();
 	per_cpu(cpu_state, cpu) = CPU_ONLINE;
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -280,6 +280,62 @@
 2:	ret
 
 
+ENTRY(xen_sysexit)
+	/* Store vcpu_info pointer for easy access.  Do it this
+	   way to avoid having to reload %fs */
+#ifdef CONFIG_SMP
+	GET_THREAD_INFO(%eax)
+	movl TI_cpu(%eax),%eax
+	movl __per_cpu_offset(,%eax,4),%eax
+	mov per_cpu__xen_vcpu(%eax),%eax
+#else
+	movl per_cpu__xen_vcpu, %eax
+#endif
+
+	/* We can't actually use sysexit in a pv guest,
+	   so fake it up with iret */
+	pushl $__USER_DS		/* user stack segment */
+	pushl %ecx			/* user esp */
+	pushl PT_EFLAGS+2*4(%esp)	/* user eflags */
+	pushl $__USER_CS		/* user code segment */
+	pushl %edx			/* user eip */
+
+xen_sysexit_start_crit:
+	/* Unmask events... */
+	movb $0, XEN_vcpu_info_mask(%eax)
+	/* ...and test for pending.
+	   There's a preempt window here, but it doesn't
+	   matter because we're within the critical section. */
+	testb $0xff, XEN_vcpu_info_pending(%eax)
+
+	/* If there's something pending, mask events again so we
+	   can directly inject it back into the kernel. */
+	jnz   1f
+
+	movl PT_EAX+5*4(%esp),%eax
+2:	iret
+1:	movb $1, XEN_vcpu_info_mask(%eax)
+xen_sysexit_end_crit:
+	addl $5*4, %esp		/* remove iret frame */
+	/* no need to re-save regs, but need to restore kernel %fs */
+	mov $__KERNEL_PERCPU, %eax
+	mov %eax, %fs
+	jmp xen_do_upcall
+.section __ex_table,"a"
+	.align 4
+	.long 2b,iret_exc
+.previous
+
+	.globl xen_sysexit_start_crit, xen_sysexit_end_crit
+/*
+	sysexit fixup is easy, since the old frame is still sitting there
+	on the stack.  We just need to remove the new recursive
+	interrupt and return.
+ */
+ENTRY(xen_sysexit_crit_fixup)
+	addl $PT_OLDESP+5*4, %esp		/* remove frame+iret */
+	jmp xen_do_upcall
+
 /*
 	Force an event check by making a hypercall,
 	but preserve regs before making the call.
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -19,6 +19,7 @@
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
+void xen_enable_sysenter(void);
 
 void xen_setup_timer(int cpu);
 void xen_setup_cpu_clockevents(void);
@@ -64,4 +65,6 @@
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
 void xen_iret(void);
+void xen_sysexit(void);
+
 #endif /* XEN_OPS_H */

[PATCH 27 of 31] xen: implement a debug-interrupt handler

[Jeremy Fitzhardinge]

Xen supports the notion of a debug interrupt which can be triggered
from the console.  For now this is implemented to show pending events,
masks and each CPU's pending event set.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/events.c  |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/smp.c     |   19 ++++++++++++++-----
 arch/x86/xen/xen-ops.h |    3 +++
 3 files changed, 64 insertions(+), 5 deletions(-)

diff --git a/arch/x86/xen/events.c b/arch/x86/xen/events.c
--- a/arch/x86/xen/events.c
+++ b/arch/x86/xen/events.c
@@ -455,6 +455,53 @@
 	notify_remote_via_irq(irq);
 }
 
+irqreturn_t xen_debug_interrupt(int irq, void *dev_id)
+{
+	struct shared_info *sh = HYPERVISOR_shared_info;
+	int cpu = smp_processor_id();
+	int i;
+	unsigned long flags;
+	static DEFINE_SPINLOCK(debug_lock);
+
+	spin_lock_irqsave(&debug_lock, flags);
+
+	printk("vcpu %d\n  ", cpu);
+
+	for_each_online_cpu(i) {
+		struct vcpu_info *v = per_cpu(xen_vcpu, i);
+		printk("%d: masked=%d pending=%d event_sel %08lx\n  ", i,
+			(get_irq_regs() && i == cpu) ? !(get_irq_regs()->flags & X86_EFLAGS_IF) : v->evtchn_upcall_mask,
+			v->evtchn_upcall_pending,
+			v->evtchn_pending_sel);
+	}
+	printk("pending:\n   ");
+	for(i = ARRAY_SIZE(sh->evtchn_pending)-1; i >= 0; i--)
+		printk("%08lx%s", sh->evtchn_pending[i],
+			i % 8 == 0 ? "\n   " : " ");
+	printk("\nmasks:\n   ");
+	for(i = ARRAY_SIZE(sh->evtchn_mask)-1; i >= 0; i--)
+		printk("%08lx%s", sh->evtchn_mask[i],
+			i % 8 == 0 ? "\n   " : " ");
+
+	printk("\nunmasked:\n   ");
+	for(i = ARRAY_SIZE(sh->evtchn_mask)-1; i >= 0; i--)
+		printk("%08lx%s", sh->evtchn_pending[i] & ~sh->evtchn_mask[i],
+			i % 8 == 0 ? "\n   " : " ");
+
+	printk("\npending list:\n");
+	for(i = 0; i < NR_EVENT_CHANNELS; i++) {
+		if (sync_test_bit(i, sh->evtchn_pending)) {
+			printk("  %d: event %d -> irq %d\n",
+				cpu_evtchn[i], i,
+				evtchn_to_irq[i]);
+		}
+	}
+
+	spin_unlock_irqrestore(&debug_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
 
 /*
  * Search the CPUs pending events bitmasks.  For each one found, map
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -36,8 +36,9 @@
 #include "mmu.h"
 
 static cpumask_t cpu_initialized_map;
-static DEFINE_PER_CPU(int, resched_irq);
-static DEFINE_PER_CPU(int, callfunc_irq);
+static DEFINE_PER_CPU(int, resched_irq) = -1;
+static DEFINE_PER_CPU(int, callfunc_irq) = -1;
+static DEFINE_PER_CPU(int, debug_irq) = -1;
 
 /*
  * Structure and data for smp_call_function(). This is designed to minimise
@@ -89,9 +90,7 @@
 static int xen_smp_intr_init(unsigned int cpu)
 {
 	int rc;
-	const char *resched_name, *callfunc_name;
-
-	per_cpu(resched_irq, cpu) = per_cpu(callfunc_irq, cpu) = -1;
+	const char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
@@ -115,6 +114,14 @@
 		goto fail;
 	per_cpu(callfunc_irq, cpu) = rc;
 
+	debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+	rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt,
+				     IRQF_DISABLED | IRQF_PERCPU | IRQF_NOBALANCING,
+				     debug_name, NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(debug_irq, cpu) = rc;
+
 	return 0;
 
  fail:
@@ -122,6 +129,8 @@
 		unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL);
 	if (per_cpu(callfunc_irq, cpu) >= 0)
 		unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
+	if (per_cpu(debug_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL);
 	return rc;
 }
 
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -2,6 +2,7 @@
 #define XEN_OPS_H
 
 #include <linux/init.h>
+#include <linux/irqreturn.h>
 
 /* These are code, but not functions.  Defined in entry.S */
 extern const char xen_hypervisor_callback[];
@@ -29,6 +30,8 @@
 int xen_set_wallclock(unsigned long time);
 unsigned long long xen_sched_clock(void);
 
+irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
+
 bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);

[PATCH 28 of 31] xen: make sure retriggered events are set pending

[Jeremy Fitzhardinge]

retrigger_dynirq() was incomplete, and didn't properly set the event
to be pending again.  It doesn't seem to actually get used.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/events.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/events.c b/arch/x86/xen/events.c
--- a/arch/x86/xen/events.c
+++ b/arch/x86/xen/events.c
@@ -601,10 +601,16 @@
 static int retrigger_dynirq(unsigned int irq)
 {
 	int evtchn = evtchn_from_irq(irq);
+	struct shared_info *sh = HYPERVISOR_shared_info;
 	int ret = 0;
 
 	if (VALID_EVTCHN(evtchn)) {
-		set_evtchn(evtchn);
+		int masked;
+
+		masked = sync_test_and_set_bit(evtchn, sh->evtchn_mask);
+		sync_set_bit(evtchn, sh->evtchn_pending);
+		if (!masked)
+			unmask_evtchn(evtchn);
 		ret = 1;
 	}
 

[PATCH 29 of 31] xen: short-cut for recursive event handling

[Jeremy Fitzhardinge]

If an event comes in while events are currently being processed, then
just increment the counter and have the outer event loop reprocess the
pending events.  This prevents unbounded recursion on heavy event
loads (of course massive event storms will cause infinite loops).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/events.c |   46 ++++++++++++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/xen/events.c b/arch/x86/xen/events.c
--- a/arch/x86/xen/events.c
+++ b/arch/x86/xen/events.c
@@ -517,29 +517,43 @@
 	int cpu = get_cpu();
 	struct shared_info *s = HYPERVISOR_shared_info;
 	struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
-	unsigned long pending_words;
+	static DEFINE_PER_CPU(unsigned, nesting_count);
+ 	unsigned count;
 
-	vcpu_info->evtchn_upcall_pending = 0;
+	do {
+		unsigned long pending_words;
 
-	/* NB. No need for a barrier here -- XCHG is a barrier on x86. */
-	pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
-	while (pending_words != 0) {
-		unsigned long pending_bits;
-		int word_idx = __ffs(pending_words);
-		pending_words &= ~(1UL << word_idx);
+		vcpu_info->evtchn_upcall_pending = 0;
 
-		while ((pending_bits = active_evtchns(cpu, s, word_idx)) != 0) {
-			int bit_idx = __ffs(pending_bits);
-			int port = (word_idx * BITS_PER_LONG) + bit_idx;
-			int irq = evtchn_to_irq[port];
+		if (__get_cpu_var(nesting_count)++)
+			goto out;
 
-			if (irq != -1) {
-				regs->orig_ax = ~irq;
-				do_IRQ(regs);
+		/* NB. No need for a barrier here -- XCHG is a barrier on x86. */
+		pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
+		while (pending_words != 0) {
+			unsigned long pending_bits;
+			int word_idx = __ffs(pending_words);
+			pending_words &= ~(1UL << word_idx);
+
+			while ((pending_bits = active_evtchns(cpu, s, word_idx)) != 0) {
+				int bit_idx = __ffs(pending_bits);
+				int port = (word_idx * BITS_PER_LONG) + bit_idx;
+				int irq = evtchn_to_irq[port];
+
+				if (irq != -1) {
+					regs->orig_ax = ~irq;
+					do_IRQ(regs);
+				}
 			}
 		}
-	}
 
+		BUG_ON(!irqs_disabled());
+
+		count = __get_cpu_var(nesting_count);
+		__get_cpu_var(nesting_count) = 0;
+	} while(count != 1);
+
+out:
 	put_cpu();
 }
 

[PATCH 30 of 31] xen: no need for domU to worry about MCE/MCA

[Jeremy Fitzhardinge]

Mask MCE/MCA out of cpu caps.  Its harmless to leave them there, but
it does prevent the kernel from starting an unnecessary thread.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -155,6 +155,8 @@
 	if (*ax == 1)
 		maskedx = ~((1 << X86_FEATURE_APIC) |  /* disable APIC */
 			    (1 << X86_FEATURE_ACPI) |  /* disable ACPI */
+			    (1 << X86_FEATURE_MCE)  |  /* disable MCE */
+			    (1 << X86_FEATURE_MCA)  |  /* disable MCA */
 			    (1 << X86_FEATURE_ACC));   /* thermal monitoring */
 
 	asm(XEN_EMULATE_PREFIX "cpuid"

[PATCH 31 of 31] xen: jump to iret fixup

[Jeremy Fitzhardinge]

Use jmp rather than call for the iret fixup, so its consistent with
the sysexit fixup, and it simplifies the stack (which is already
complex).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

---
 arch/x86/kernel/entry_32.S |    3 +--
 arch/x86/xen/xen-asm.S     |   22 +++++++++-------------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1049,8 +1049,7 @@
 	cmpl $xen_iret_end_crit,%eax
 	jae  1f
 
-	call xen_iret_crit_fixup
-	jmp  2f
+	jmp  xen_iret_crit_fixup
 
 1:	cmpl $xen_sysexit_start_crit,%eax
 	jb   2f
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -223,9 +223,7 @@
 	 ds		}  SAVE_ALL state
 	 eax		}
 	  :		:
-	 ebx		}
-	----------------
-	 return addr	 <- esp
+	 ebx		}<- esp
 	----------------
 
    In order to deliver the nested exception properly, we need to shift
@@ -240,10 +238,8 @@
    it's usermode state which we eventually need to restore.
  */
 ENTRY(xen_iret_crit_fixup)
-	/* offsets +4 for return address */
-
 	/*
-	   Paranoia: Make sure we're really coming from userspace.
+	   Paranoia: Make sure we're really coming from kernel space.
 	   One could imagine a case where userspace jumps into the
 	   critical range address, but just before the CPU delivers a GP,
 	   it decides to deliver an interrupt instead.  Unlikely?
@@ -252,32 +248,32 @@
 	   jump instruction itself, not the destination, but some virtual
 	   environments get this wrong.
 	 */
-	movl PT_CS+4(%esp), %ecx
+	movl PT_CS(%esp), %ecx
 	andl $SEGMENT_RPL_MASK, %ecx
 	cmpl $USER_RPL, %ecx
 	je 2f
 
-	lea PT_ORIG_EAX+4(%esp), %esi
-	lea PT_EFLAGS+4(%esp), %edi
+	lea PT_ORIG_EAX(%esp), %esi
+	lea PT_EFLAGS(%esp), %edi
 
 	/* If eip is before iret_restore_end then stack
 	   hasn't been restored yet. */
 	cmp $iret_restore_end, %eax
 	jae 1f
 
-	movl 0+4(%edi),%eax		/* copy EAX */
-	movl %eax, PT_EAX+4(%esp)
+	movl 0+4(%edi),%eax		/* copy EAX (just above top of frame) */
+	movl %eax, PT_EAX(%esp)
 
 	lea ESP_OFFSET(%edi),%edi	/* move dest up over saved regs */
 
 	/* set up the copy */
 1:	std
-	mov $(PT_EIP+4) / 4, %ecx	/* copy ret+saved regs up to orig_eax */
+	mov $PT_EIP / 4, %ecx		/* saved regs up to orig_eax */
 	rep movsl
 	cld
 
 	lea 4(%edi),%esp		/* point esp to new frame */
-2:	ret
+2:	jmp xen_do_upcall
 
 
 ENTRY(xen_sysexit)

Re: [PATCH 00 of 31] x86: unification and xen updates

[Zachary Amsden]

I looked over these and everything looks fine to me.  I didn't test them
though, since I'm not working on a git tree right now, but be sure to do
a whole slew of compile testing - those demacroizations can trip up in
random places hidden under config options like HIGHPTE.

Zach

Acked-by: Zachary Amsden <zach@vmware.com>

On Mon, 2008-03-17 at 16:36 -0700, Jeremy Fitzhardinge wrote:
> Hi Ingo,
> 
> This is a great big pile of x86 unification and Xen bugfix patches.
> They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).
> 
> Patches are based on x86.git#testing as of this morning.
> 
> The overview:
> 
>  - a couple of Xen bugfixes, which are 2.6.24 and 2.6.25 material
>  - a bunch of x86 cleanups and unifications, mostly around pgalloc
>  - some Xen fixes and improvements:
>    - unify PAE/non-PAE pagetable handling
>    - implement sysenter where applicable
> 
> Thanks,
> 	J
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Zachary Amsden wrote:
> I looked over these and everything looks fine to me.  I didn't test them
> though, since I'm not working on a git tree right now, but be sure to do
> a whole slew of compile testing - those demacroizations can trip up in
> random places hidden under config options like HIGHPTE.
>   

I've been doing regular randconfig builds to shake out those kinds of 
things, though I haven't put Ingo's infrastructure in place to actually 
try to generate bootable kernels from randconfigs.

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ian Campbell]

On Mon, 2008-03-17 at 16:36 -0700, Jeremy Fitzhardinge wrote:
> Hi Ingo,
> 
> This is a great big pile of x86 unification and Xen bugfix patches.
> They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).

FWIW I tested in a PAE Xen guest on 32 and 64 bit h/v and it was fine
including running ddcprobe which was my most recent issue. I can't see
why this would fix it though.

I thought for a second when you said it booted on 64 bit you meant 64
bit Xen guest, do you know how that stuff is going?

Ian.

> 
> Patches are based on x86.git#testing as of this morning.
> 
> The overview:
> 
>  - a couple of Xen bugfixes, which are 2.6.24 and 2.6.25 material
>  - a bunch of x86 cleanups and unifications, mostly around pgalloc
>  - some Xen fixes and improvements:
>    - unify PAE/non-PAE pagetable handling
>    - implement sysenter where applicable
> 
> Thanks,
> 	J
> 
> 
> 
-- 
Ian Campbell

  Evil isn't all bad.

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ian Campbell wrote:
> On Mon, 2008-03-17 at 16:36 -0700, Jeremy Fitzhardinge wrote:
>   
>> Hi Ingo,
>>
>> This is a great big pile of x86 unification and Xen bugfix patches.
>> They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).
>>     
>
> FWIW I tested in a PAE Xen guest on 32 and 64 bit h/v and it was fine
> including running ddcprobe which was my most recent issue. I can't see
> why this would fix it though.
>   

I'm actually having problem booting 32-on-64 hvm guests.  Specifically 
the Fedora installer crashes fairly early on:

Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 844k
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
^[[9;0]^[[8]
Greetings.
anaconda installer init version 11.3.0.50 starting
mounting /proc filesystem... done
creating /dev filesystem... done
mounting /dev/pts (unix98 pty) filesystem... done
mounting /sys filesystem... done
anaconda installer init version 11.3.0.50 using a serial console
trying to remount root filesystem read write... done
mounting /tmp as ramfs... done
running install...
running /sbin/loader
loader received SIGSEGV!  Backtrace:
[0x804a030]
[0x110420]
[0x816a7c8]
[0x81697a5]
[0x805b626]
[0x805b72b]
[0x805c153]
[0x804af81]
[0x8175004]
[0x8048151]
install exited abnormally [1/1] 
sending termination signals...done
sending kill signals...done
disabling swap...
unmounting filesystems...
        /proc done
        /dev/pts done
        /sys done
        /tmp/ramfs done
you may safely reboot your system


Seen anything like that?

> I thought for a second when you said it booted on 64 bit you meant 64
> bit Xen guest, do you know how that stuff is going?
>   

Last I heard, they got something booting, but it wasn't very clean.  I 
need to resync with Eduardo.  A lot of these changes were intended to 
make that effort easier, but it would be nice to confirm ;)  Doesn't 
look like http://git.et.redhat.com/?p=xen-pvops-64.git;a=summary has 
changed much lately.

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ian Campbell]

On Wed, 2008-03-19 at 08:11 -0700, Jeremy Fitzhardinge wrote:
> Ian Campbell wrote:
> > On Mon, 2008-03-17 at 16:36 -0700, Jeremy Fitzhardinge wrote:
> >   
> >> Hi Ingo,
> >>
> >> This is a great big pile of x86 unification and Xen bugfix patches.
> >> They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).
> >>     
> >
> > FWIW I tested in a PAE Xen guest on 32 and 64 bit h/v and it was fine
> > including running ddcprobe which was my most recent issue. I can't see
> > why this would fix it though.
> >   
> 
> I'm actually having problem booting 32-on-64 hvm guests.  Specifically 
> the Fedora installer crashes fairly early on:
[snip]
> 
> Seen anything like that?

I practically never boot HVM Linux guests of any sort so no.

> > I thought for a second when you said it booted on 64 bit you meant 64
> > bit Xen guest, do you know how that stuff is going?
> >   
> 
> Last I heard, they got something booting, but it wasn't very clean.  I 
> need to resync with Eduardo.  A lot of these changes were intended to 
> make that effort easier, but it would be nice to confirm ;)  Doesn't 
> look like http://git.et.redhat.com/?p=xen-pvops-64.git;a=summary has 
> changed much lately.

Thanks, will keep an eye on that tree.

> 
>     J
> 
-- 
Ian Campbell

Intel CPUs are not defective, they just act that way.
		-- Henry Spencer

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ian Campbell wrote:
> I practically never boot HVM Linux guests of any sort so no.
>   

It's a first for me.  I just wanted a test-env for these x86 trees.

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Hi Ingo,
> 
> This is a great big pile of x86 unification and Xen bugfix patches. 
> They build and boot for me on 64-bit and 32-bit (PAE and non-PAE).
> 
> Patches are based on x86.git#testing as of this morning.
> 
> The overview:
> 
>  - a couple of Xen bugfixes, which are 2.6.24 and 2.6.25 material
>  - a bunch of x86 cleanups and unifications, mostly around pgalloc
>  - some Xen fixes and improvements:
>    - unify PAE/non-PAE pagetable handling
>    - implement sysenter where applicable

thanks Jeremy, i've queued them all up and the current x86/latest branch 
should have them. They looked robust so far in my testing.

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> I'm actually having problem booting 32-on-64 hvm guests.  Specifically 
> the Fedora installer crashes fairly early on:

is this a bug that has leaked into current upstream -git as well, or is 
it an x86.git/testing issue?

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>   
>> I'm actually having problem booting 32-on-64 hvm guests.  Specifically 
>> the Fedora installer crashes fairly early on:
>>     
>
> is this a bug that has leaked into current upstream -git as well, or is 
> it an x86.git/testing issue?

I'm assuming its a Xen bug actually.  It happens with the distro kernel 
on the installers as well as x86.git.  Googling around shows similar 
symptoms on laptops with problematic BIOSes, so that points at a 
possible problem.

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> thanks Jeremy, i've queued them all up and the current x86/latest 
> branch should have them. They looked robust so far in my testing.

found a build bug on 32-bit & PAE - pud_populate() assumed too much 
about types:

In file included from arch/x86/mm/pgtable.c:3:
include/asm/pgalloc.h: In function 'pud_populate':
include/asm/pgalloc.h:93: error: dereferencing pointer to incomplete type

i've uninlined it and has trickled that through your series.

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
>   
>> thanks Jeremy, i've queued them all up and the current x86/latest 
>> branch should have them. They looked robust so far in my testing.
>>     
>
> found a build bug on 32-bit & PAE - pud_populate() assumed too much 
> about types:
>
> In file included from arch/x86/mm/pgtable.c:3:
> include/asm/pgalloc.h: In function 'pud_populate':
> include/asm/pgalloc.h:93: error: dereferencing pointer to incomplete type
>
> i've uninlined it and has trickled that through your series.
>   

I build 32-bit PAE all the time.  I guess the difference is your build 
is !PARAVIRT?

    J
> 	Ingo
>   

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 301 bytes --]


* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

>> i've uninlined it and has trickled that through your series.
>
> I build 32-bit PAE all the time.  I guess the difference is your build 
> is !PARAVIRT?

yes, randconfig triggered it rather quickly. Bad config attached. (it 
now builds fine)

	Ingo

[-- Attachment #2: config-Wed_Mar_19_20_27_00_CET_2008.bad --]
[-- Type: text/plain, Size: 51225 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
# Wed Mar 19 20:26:58 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_BOOTPARAM_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BOOTPARAM_MAXCPUS_1=y
# CONFIG_BOOTPARAM_NOSMP is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_CLASSIC_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_BOOTPARAM_NO_HZ_OFF is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_BOOTPARAM_HIGHRES_OFF is not set
# CONFIG_SMP is not set
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
CONFIG_MEFFICEON=y
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_HPET_TIMER is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_1=y
CONFIG_BOOTPARAM_NOAPIC=y
CONFIG_BOOTPARAM_NOLAPIC=y
CONFIG_BOOTPARAM_NOLAPIC_TIMER=y
# CONFIG_BOOTPARAM_LAPIC is not set
CONFIG_BOOTPARAM_HPET_DISABLE=y
# CONFIG_BOOTPARAM_IDLE_MWAIT is not set
# CONFIG_BOOTPARAM_IDLE_POLL is not set
CONFIG_BOOTPARAM_HIGHMEM_512M=y
CONFIG_BOOTPARAM_NOPAT=y
CONFIG_BOOTPARAM_NOTSC=y
# CONFIG_BOOTPARAM_ACPI_OFF is not set
CONFIG_BOOTPARAM_PCI_NOACPI=y
CONFIG_BOOTPARAM_PCI_NOMSI=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_ESP=y
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_IPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_IPDDP_DECAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
# CONFIG_IEEE80211_CRYPT_WEP is not set
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_DEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
CONFIG_MSI_LAPTOP=y
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_NET_SB1000=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_ELMC is not set
CONFIG_ELMC_II=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ENC28J60 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
CONFIG_DM9102=y
# CONFIG_ULI526X is not set
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
# CONFIG_NE2_MCA is not set
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
# CONFIG_VIA_RHINE is not set
CONFIG_SC92031=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=y
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
# CONFIG_PC300 is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE is not set
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MCA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=y
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=y
CONFIG_SCx200_ACB=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
CONFIG_I2C_VOODOO3=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_PCF8575=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_TPS65010=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=y
# CONFIG_SCx200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
CONFIG_DVB_CORE=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_HECUBA=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_I810_I2C is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_INTEL=y
CONFIG_FB_INTEL_DEBUG=y
# CONFIG_FB_INTEL_I2C is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX_SET_FBSIZE=y
CONFIG_FB_GEODE_GX_FBSIZE=0x1600000
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_SM501=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y

#
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=y
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
# CONFIG_SND_INDIGOIO is not set
CONFIG_SND_INDIGODJ=y
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=y
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=y
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=y
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_MAESTRO3=y
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SIS7019=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# SPI devices
#

#
# USB devices
#
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
CONFIG_SND_PDAUDIOCF=y

#
# System on Chip audio support
#
CONFIG_SND_SOC=y

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USB_MON is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_AIRPRIME=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_CLEVO_MAIL=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set

#
# Userspace I/O
#
CONFIG_UIO=y
CONFIG_UIO_CIF=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not set
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=y
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_HAVE_FTRACE=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACING=y
CONFIG_FTRACE=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_KGDB=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_SYSPROF=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>   
>>> i've uninlined it and has trickled that through your series.
>>>       
>> I build 32-bit PAE all the time.  I guess the difference is your build 
>> is !PARAVIRT?
>>     
>
> yes, randconfig triggered it rather quickly. Bad config attached. (it 
> now builds fine)
>
> 	Ingo
>   

This patch applied on top of everything else is sufficient to fix the 
problem for me:

Subject: x86: fix build problem in pud_populate without CONFIG_PARAVIRT

asm/paravirt.h ends up including linux/sched.h, which pud_populate needs
for its reference to current.  Specifically include linux/sched.h for it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 include/asm-x86/pgalloc.h |    1 +
 1 file changed, 1 insertion(+)

===================================================================
--- a/include/asm-x86/pgalloc.h
+++ b/include/asm-x86/pgalloc.h
@@ -4,6 +4,7 @@
 #include <linux/threads.h>
 #include <linux/mm.h>		/* for struct page */
 #include <linux/pagemap.h>
+#include <linux/sched.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

kernel crash for sale ;-)

bisected it down to:

| commit aaa7d17e66bc0990d7bee8db5d37e12ae087e206
| Author: Jeremy Fitzhardinge <jeremy@goop.org>
| Date:   Mon Mar 17 16:37:16 2008 -0700
|
|     x86: only enable interrupts when kernel state has been set up

the bug is that you leak irqs off state into C code... which crashes in 
the block layer.

Crash log below. For now i've disabled this patch. I suspect you can 
reproduce this by running a DEBUG_PAGEALLOC+PROVE_LOCKING kernel.

	Ingo

------------>
[   66.336389] PM: Adding info for No Bus:vcsa1
[   66.344927] device: 'vcs1': device_unregister
[   66.348200] PM: Removing info for No Bus:vcs1
[   66.353463] device: 'vcs1': device_create_release
[   66.356305] device: 'vcsa1': device_unregister
[   66.360244] PM: Removing info for No Bus:vcsa1
[   66.365345] device: 'vcsa1': device_create_release
[   66.392837] BUG: sleeping function called from invalid context at include/linux/pagemap.h:169
[   66.396173] in_atomic():0, irqs_disabled():1
[   66.396173] 1 lock held by init/1772:
[   66.396173]  #0:  (&mm->mmap_sem){....}, at: [<c01166f3>] do_page_fault+0x93/0x7c0
[   66.396173] Pid: 1772, comm: init Not tainted 2.6.25-rc6-x86-latest.git #11
[   66.396173]  [<c011f692>] __might_sleep+0xc2/0xe0
[   66.396173]  [<c0162c26>] __do_fault+0x3f6/0x490
[   66.396173]  [<c01641d1>] handle_mm_fault+0x151/0x570
[   66.396173]  [<c013b046>] ? down_read_trylock+0x56/0x60
[   66.396173]  [<c0116751>] do_page_fault+0xf1/0x7c0
[   66.396173]  [<c0116660>] ? do_page_fault+0x0/0x7c0
[   66.396173]  [<c082fd42>] ? error_code+0x6a/0x70
[   66.396173]  [<c030f772>] ? __put_user_4+0x12/0x18
[   66.396173]  [<c0116660>] ? do_page_fault+0x0/0x7c0
[   66.396173]  [<c082fd42>] error_code+0x6a/0x70
[   66.396173]  =======================
[   66.397045] device: 'vcs1': device_add
[   66.400497] PM: Adding info for No Bus:vcs1
[   66.411267] device: 'vcsa1': device_add
[   66.412445] PM: Adding info for No Bus:vcsa1
[   66.481137] ------------[ cut here ]------------
[   66.484179] kernel BUG at fs/buffer.c:1274!
[   66.484179] invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
[   66.484179] 
[   66.484179] Pid: 1775, comm: rc.sysinit Not tainted (2.6.25-rc6-x86-latest.git #11)
[   66.484179] EIP: 0060:[<c0197a35>] EFLAGS: 00010046 CPU: 0
[   66.484179] EIP is at __find_get_block+0x185/0x1b0
[   66.484179] EAX: 00000096 EBX: 00000000 ECX: 00000000 EDX: 00212800
[   66.484179] ESI: 00212800 EDI: 00000000 EBP: f71a6b40 ESP: f71a6b0c
[   66.484179]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   66.484179] Process rc.sysinit (pid: 1775, ti=f71a6000 task=f7190000 task.ti=f71a6000)
[   66.484179] Stack: f7802300 c0141f68 c050595b 00000000 00000280 00000000 f7190000 f71a6b48 
[   66.484179]        0000030f 00000000 00000000 00000000 f784b424 f71a6ba8 c0197a80 00001000 
[   66.484179]        c0141f68 c0a965a0 f7693ae4 00000286 00212800 00000000 f7802300 f7190000 
[   66.484179] Call Trace:
[   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
[   66.484179]  [<c050595b>] ? ata_bmdma_start+0x1b/0x20
[   66.484179]  [<c0197a80>] ? __getblk+0x20/0x2b0
[   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
[   66.484179]  [<c01c0994>] ? ext3_getblk+0xb4/0x1c0
[   66.484179]  [<c02fea6d>] ? __generic_unplug_device+0x1d/0x30
[   66.484179]  [<c01c199a>] ? ext3_bread+0x1a/0x80
[   66.484179]  [<c01c4370>] ? dx_probe+0x40/0x2f0
[   66.484179]  [<c010666b>] ? common_interrupt+0x23/0x28
[   66.484179]  [<c01c50b2>] ? ext3_find_entry+0x252/0x680
[   66.484179]  [<c082fad0>] ? _spin_unlock_irq+0x20/0x40
[   66.484179]  [<c0171161>] ? check_bytes_and_report+0x21/0xc0
[   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
[   66.484179]  [<c01c5e9a>] ? ext3_lookup+0x3a/0xd0
[   66.484179]  [<c017e5a8>] ? do_lookup+0x138/0x180
[   66.484179]  [<c017fd6c>] ? __link_path_walk+0x6bc/0xd00
[   66.484179]  [<c0171161>] ? check_bytes_and_report+0x21/0xc0
[   66.484179]  [<c0108521>] ? do_IRQ+0x81/0xc0
[   66.484179]  [<c01803f0>] ? link_path_walk+0x40/0xa0
[   66.484179]  [<c082f9bd>] ? _spin_unlock+0x1d/0x40
[   66.484179]  [<c01753e0>] ? get_unused_fd_flags+0xc0/0xe0
[   66.484179]  [<c0180468>] ? path_walk+0x18/0x20
[   66.484179]  [<c018063e>] ? do_path_lookup+0x6e/0x180
[   66.484179]  [<c01811ed>] ? __path_lookup_intent_open+0x4d/0x90
[   66.484179]  [<c01812af>] ? path_lookup_open+0x1f/0x30
[   66.484179]  [<c018139b>] ? open_namei+0x5b/0x5e0
[   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
[   66.484179]  [<c017568c>] ? do_filp_open+0x2c/0x50
[   66.484179]  [<c082f9bd>] ? _spin_unlock+0x1d/0x40
[   66.484179]  [<c01753e0>] ? get_unused_fd_flags+0xc0/0xe0
[   66.484179]  [<c01756f5>] ? do_sys_open+0x45/0x80
[   66.484179]  [<c017576c>] ? sys_open+0x1c/0x20
[   66.484179]  [<c0105caa>] ? syscall_call+0x7/0xb
[   66.484179]  =======================
[   66.484179] Code: 40 08 04 75 3b 8b 7d d0 85 ff 0f 84 30 ff ff ff 8b 45 d0 e8 3e f4 ff ff e9 23 ff ff ff 89 d8 e8 32 f4 ff ff 89 f6 e9 78 ff ff ff <0f> 0b eb fe 8d b4 26 00 00 00 00 e8 db 57 69 00 e9 fc fe ff ff 
[   66.484179] EIP: [<c0197a35>] __find_get_block+0x185/0x1b0 SS:ESP 0068:f71a6b0c
[   66.484179] ---[ end trace f33d03609d276480 ]---
[   66.493421] device: 'vcs1': device_unregister

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> kernel crash for sale ;-)
>
> bisected it down to:
>
> | commit aaa7d17e66bc0990d7bee8db5d37e12ae087e206
> | Author: Jeremy Fitzhardinge <jeremy@goop.org>
> | Date:   Mon Mar 17 16:37:16 2008 -0700
> |
> |     x86: only enable interrupts when kernel state has been set up
>
> the bug is that you leak irqs off state into C code... which crashes in 
> the block layer.
>
> Crash log below. For now i've disabled this patch. I suspect you can 
> reproduce this by running a DEBUG_PAGEALLOC+PROVE_LOCKING kernel.
>   

Hm, OK.  I can't see how it can avoid enabling interrupts on that path, 
but I'll look more closely.  What's the .config.  32-bit, obviously.  
Paravirt?

> 	Ingo
>
> ------------>
> [   66.336389] PM: Adding info for No Bus:vcsa1
> [   66.344927] device: 'vcs1': device_unregister
> [   66.348200] PM: Removing info for No Bus:vcs1
> [   66.353463] device: 'vcs1': device_create_release
> [   66.356305] device: 'vcsa1': device_unregister
> [   66.360244] PM: Removing info for No Bus:vcsa1
> [   66.365345] device: 'vcsa1': device_create_release
> [   66.392837] BUG: sleeping function called from invalid context at include/linux/pagemap.h:169
> [   66.396173] in_atomic():0, irqs_disabled():1
> [   66.396173] 1 lock held by init/1772:
> [   66.396173]  #0:  (&mm->mmap_sem){....}, at: [<c01166f3>] do_page_fault+0x93/0x7c0
> [   66.396173] Pid: 1772, comm: init Not tainted 2.6.25-rc6-x86-latest.git #11
> [   66.396173]  [<c011f692>] __might_sleep+0xc2/0xe0
> [   66.396173]  [<c0162c26>] __do_fault+0x3f6/0x490
> [   66.396173]  [<c01641d1>] handle_mm_fault+0x151/0x570
> [   66.396173]  [<c013b046>] ? down_read_trylock+0x56/0x60
> [   66.396173]  [<c0116751>] do_page_fault+0xf1/0x7c0
> [   66.396173]  [<c0116660>] ? do_page_fault+0x0/0x7c0
> [   66.396173]  [<c082fd42>] ? error_code+0x6a/0x70
> [   66.396173]  [<c030f772>] ? __put_user_4+0x12/0x18
> [   66.396173]  [<c0116660>] ? do_page_fault+0x0/0x7c0
> [   66.396173]  [<c082fd42>] error_code+0x6a/0x70
> [   66.396173]  =======================
> [   66.397045] device: 'vcs1': device_add
> [   66.400497] PM: Adding info for No Bus:vcs1
> [   66.411267] device: 'vcsa1': device_add
> [   66.412445] PM: Adding info for No Bus:vcsa1
> [   66.481137] ------------[ cut here ]------------
> [   66.484179] kernel BUG at fs/buffer.c:1274!
> [   66.484179] invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
> [   66.484179] 
> [   66.484179] Pid: 1775, comm: rc.sysinit Not tainted (2.6.25-rc6-x86-latest.git #11)
> [   66.484179] EIP: 0060:[<c0197a35>] EFLAGS: 00010046 CPU: 0
> [   66.484179] EIP is at __find_get_block+0x185/0x1b0
> [   66.484179] EAX: 00000096 EBX: 00000000 ECX: 00000000 EDX: 00212800
> [   66.484179] ESI: 00212800 EDI: 00000000 EBP: f71a6b40 ESP: f71a6b0c
> [   66.484179]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> [   66.484179] Process rc.sysinit (pid: 1775, ti=f71a6000 task=f7190000 task.ti=f71a6000)
> [   66.484179] Stack: f7802300 c0141f68 c050595b 00000000 00000280 00000000 f7190000 f71a6b48 
> [   66.484179]        0000030f 00000000 00000000 00000000 f784b424 f71a6ba8 c0197a80 00001000 
> [   66.484179]        c0141f68 c0a965a0 f7693ae4 00000286 00212800 00000000 f7802300 f7190000 
> [   66.484179] Call Trace:
> [   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
> [   66.484179]  [<c050595b>] ? ata_bmdma_start+0x1b/0x20
> [   66.484179]  [<c0197a80>] ? __getblk+0x20/0x2b0
> [   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
> [   66.484179]  [<c01c0994>] ? ext3_getblk+0xb4/0x1c0
> [   66.484179]  [<c02fea6d>] ? __generic_unplug_device+0x1d/0x30
> [   66.484179]  [<c01c199a>] ? ext3_bread+0x1a/0x80
> [   66.484179]  [<c01c4370>] ? dx_probe+0x40/0x2f0
> [   66.484179]  [<c010666b>] ? common_interrupt+0x23/0x28
> [   66.484179]  [<c01c50b2>] ? ext3_find_entry+0x252/0x680
> [   66.484179]  [<c082fad0>] ? _spin_unlock_irq+0x20/0x40
> [   66.484179]  [<c0171161>] ? check_bytes_and_report+0x21/0xc0
> [   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
> [   66.484179]  [<c01c5e9a>] ? ext3_lookup+0x3a/0xd0
> [   66.484179]  [<c017e5a8>] ? do_lookup+0x138/0x180
> [   66.484179]  [<c017fd6c>] ? __link_path_walk+0x6bc/0xd00
> [   66.484179]  [<c0171161>] ? check_bytes_and_report+0x21/0xc0
> [   66.484179]  [<c0108521>] ? do_IRQ+0x81/0xc0
> [   66.484179]  [<c01803f0>] ? link_path_walk+0x40/0xa0
> [   66.484179]  [<c082f9bd>] ? _spin_unlock+0x1d/0x40
> [   66.484179]  [<c01753e0>] ? get_unused_fd_flags+0xc0/0xe0
> [   66.484179]  [<c0180468>] ? path_walk+0x18/0x20
> [   66.484179]  [<c018063e>] ? do_path_lookup+0x6e/0x180
> [   66.484179]  [<c01811ed>] ? __path_lookup_intent_open+0x4d/0x90
> [   66.484179]  [<c01812af>] ? path_lookup_open+0x1f/0x30
> [   66.484179]  [<c018139b>] ? open_namei+0x5b/0x5e0
> [   66.484179]  [<c0141f68>] ? __lock_acquire+0x168/0x730
> [   66.484179]  [<c017568c>] ? do_filp_open+0x2c/0x50
> [   66.484179]  [<c082f9bd>] ? _spin_unlock+0x1d/0x40
> [   66.484179]  [<c01753e0>] ? get_unused_fd_flags+0xc0/0xe0
> [   66.484179]  [<c01756f5>] ? do_sys_open+0x45/0x80
> [   66.484179]  [<c017576c>] ? sys_open+0x1c/0x20
> [   66.484179]  [<c0105caa>] ? syscall_call+0x7/0xb
> [   66.484179]  =======================
> [   66.484179] Code: 40 08 04 75 3b 8b 7d d0 85 ff 0f 84 30 ff ff ff 8b 45 d0 e8 3e f4 ff ff e9 23 ff ff ff 89 d8 e8 32 f4 ff ff 89 f6 e9 78 ff ff ff <0f> 0b eb fe 8d b4 26 00 00 00 00 e8 db 57 69 00 e9 fc fe ff ff 
> [   66.484179] EIP: [<c0197a35>] __find_get_block+0x185/0x1b0 SS:ESP 0068:f71a6b0c
> [   66.484179] ---[ end trace f33d03609d276480 ]---
> [   66.493421] device: 'vcs1': device_unregister
>
>   

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>   
>> Hm, OK.  I can't see how it can avoid enabling interrupts on that 
>> path, but I'll look more closely.  What's the .config.  32-bit, 
>> obviously.  Paravirt?
>>     
>
> config attached. randconfig generated, so it can have random surprises 
> enabled :)
>   

Thanks.  What was the workload?  Did it just happen, or were you doing 
something specific?

BTW, that other pud_populate config you sent fails to link for me:

  LD      .tmp_vmlinux1
arch/x86/kernel/built-in.o: In function `MP_processor_info':
mpparse_32.c:(.cpuinit.text+0x32b2): undefined reference to `x86_cpu_to_apicid_early_ptr'
mpparse_32.c:(.cpuinit.text+0x32c4): undefined reference to `x86_bios_cpu_apicid_early_ptr'
mpparse_32.c:(.cpuinit.text+0x3363): undefined reference to `per_cpu__x86_cpu_to_apicid'
mpparse_32.c:(.cpuinit.text+0x336e): undefined reference to `per_cpu__x86_bios_cpu_apicid'
arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
summit.c:(.text+0xaf): undefined reference to `per_cpu__x86_bios_cpu_apicid'
arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
bigsmp.c:(.text+0x47f): undefined reference to `per_cpu__x86_bios_cpu_apicid'
arch/x86/mach-generic/built-in.o: In function `init_apic_ldr':
bigsmp.c:(.text+0x6cc): undefined reference to `per_cpu__x86_bios_cpu_apicid'
arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
es7000.c:(.text+0x774): undefined reference to `per_cpu__x86_bios_cpu_apicid'
arch/x86/mach-generic/built-in.o:es7000.c:(.text+0x906): more undefined references to `per_cpu__x86_bios_cpu_apicid' follow
make[2]: *** [.tmp_vmlinux1] Error 1

	J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 300 bytes --]


* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Hm, OK.  I can't see how it can avoid enabling interrupts on that 
> path, but I'll look more closely.  What's the .config.  32-bit, 
> obviously.  Paravirt?

config attached. randconfig generated, so it can have random surprises 
enabled :)

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 50956 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
# Wed Mar 19 20:51:39 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_CLASSIC_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
CONFIG_MEFFICEON=y
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_HPET_TIMER is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_ESP=y
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_IPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_IPDDP_DECAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
# CONFIG_IEEE80211_CRYPT_WEP is not set
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_DEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
CONFIG_MSI_LAPTOP=y
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_NET_SB1000=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_ELMC is not set
CONFIG_ELMC_II=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ENC28J60 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
CONFIG_DM9102=y
# CONFIG_ULI526X is not set
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
# CONFIG_NE2_MCA is not set
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
# CONFIG_VIA_RHINE is not set
CONFIG_SC92031=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=y
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
# CONFIG_PC300 is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE is not set
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MCA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=y
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=y
CONFIG_SCx200_ACB=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
CONFIG_I2C_VOODOO3=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_PCF8575=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_TPS65010=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=y
# CONFIG_SCx200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_HECUBA=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_I810_I2C is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_INTEL=y
CONFIG_FB_INTEL_DEBUG=y
# CONFIG_FB_INTEL_I2C is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX_SET_FBSIZE=y
CONFIG_FB_GEODE_GX_FBSIZE=0x1600000
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y

#
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=y
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
# CONFIG_SND_INDIGOIO is not set
CONFIG_SND_INDIGODJ=y
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=y
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=y
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=y
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_MAESTRO3=y
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SIS7019=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# SPI devices
#

#
# USB devices
#
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
CONFIG_SND_PDAUDIOCF=y

#
# System on Chip audio support
#
CONFIG_SND_SOC=y

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_OSS is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USB_MON is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_AIRPRIME=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_CLEVO_MAIL=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set

#
# Userspace I/O
#
CONFIG_UIO=y
CONFIG_UIO_CIF=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not set
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=y
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_KGDB=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_SYSPROF=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

>> config attached. randconfig generated, so it can have random 
>> surprises enabled :)
>
> Thanks.  What was the workload?  Did it just happen, or were you doing 
> something specific?

simple bootup triggered it.

> BTW, that other pud_populate config you sent fails to link for me:
>
>  LD      .tmp_vmlinux1
> arch/x86/kernel/built-in.o: In function `MP_processor_info':
> mpparse_32.c:(.cpuinit.text+0x32b2): undefined reference to `x86_cpu_to_apicid_early_ptr'
> mpparse_32.c:(.cpuinit.text+0x32c4): undefined reference to `x86_bios_cpu_apicid_early_ptr'
> mpparse_32.c:(.cpuinit.text+0x3363): undefined reference to `per_cpu__x86_cpu_to_apicid'
> mpparse_32.c:(.cpuinit.text+0x336e): undefined reference to `per_cpu__x86_bios_cpu_apicid'
> arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
> summit.c:(.text+0xaf): undefined reference to `per_cpu__x86_bios_cpu_apicid'
> arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
> bigsmp.c:(.text+0x47f): undefined reference to `per_cpu__x86_bios_cpu_apicid'
> arch/x86/mach-generic/built-in.o: In function `init_apic_ldr':
> bigsmp.c:(.text+0x6cc): undefined reference to `per_cpu__x86_bios_cpu_apicid'
> arch/x86/mach-generic/built-in.o: In function `cpu_present_to_apicid':
> es7000.c:(.text+0x774): undefined reference to `per_cpu__x86_bios_cpu_apicid'
> arch/x86/mach-generic/built-in.o:es7000.c:(.text+0x906): more undefined references to `per_cpu__x86_bios_cpu_apicid' follow
> make[2]: *** [.tmp_vmlinux1] Error 1

"git-remote update" should solve that for you.

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>   
>>> config attached. randconfig generated, so it can have random 
>>> surprises enabled :)
>>>       
>> Thanks.  What was the workload?  Did it just happen, or were you doing 
>> something specific?
>>     
>
> simple bootup triggered it.
>   

Haven't managed to repro it yet, but DEBUG_PAGE_ALLOC turned up another 
case of doing tlb flushes with preempt on:

BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is xen_flush_tlb+0xe/0xa2
Pid: 1, comm: init Not tainted 2.6.25-rc6-x86-latest.git #281
 [<c0234eed>] debug_smp_processor_id+0x99/0xb0
 [<c0103ca0>] xen_flush_tlb+0xe/0xa2
 [<c011d46b>] kernel_map_pages+0x104/0x125
 [<c0154f45>] get_page_from_freelist+0x32f/0x433
 [<c01444c4>] ? lock_acquire+0x90/0x9d
 [<c01550bd>] __alloc_pages+0x5e/0x2a5
 [<c015c5b3>] do_wp_page+0x2c9/0x653
 [<c017953f>] ? do_lookup+0x4f/0x146
 [<c0103e11>] ? xen_restore_fl+0x2e/0x52
 [<c01444c4>] ? lock_acquire+0x90/0x9d
 [<c015f720>] ? handle_mm_fault+0xa37/0xbb8
 [<c015f7a4>] handle_mm_fault+0xabb/0xbb8
 [<c0179332>] ? path_put+0x20/0x23
 [<c0103e11>] ? xen_restore_fl+0x2e/0x52
 [<c0103e11>] ? xen_restore_fl+0x2e/0x52
 [<c045699d>] ? do_page_fault+0x460/0x952
 [<c013b80d>] ? down_read_trylock+0x37/0x41
 [<c0456a51>] do_page_fault+0x514/0x952
 [<c0232116>] ? copy_to_user+0x2a/0x34
 [<c017e3ce>] ? sys_select+0x13e/0x164
 [<c045653d>] ? do_page_fault+0x0/0x952
 [<c0454eaa>] error_code+0x72/0x78


This code seems a bit fast and loose anyway, since it only does a local 
TLB flush, which means that other CPUs can still accessed free memory if 
they still have a stale TLB for it.  Having the tlb flush happen on a 
random CPU doesn't really affect things much.

    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

>> simple bootup triggered it.
>
> Haven't managed to repro it yet, but DEBUG_PAGE_ALLOC turned up 
> another case of doing tlb flushes with preempt on:

turns out that i have another bug which causes a screaming IRQ#0 that 
floods the box at 70K irqs/sec. That is what triggered that crash in 
your patch most likely.

so either figure out the bug by review or try turning your IRQ#0 into a 
screaming one for debug purposes. (hint: turning irq#0's trigger mode 
from 'edge' to 'level' in mpparse.c or ioapic.c does wonders to that end 
;-)

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> turns out that i have another bug which causes a screaming IRQ#0 that 
> floods the box at 70K irqs/sec. That is what triggered that crash in 
> your patch most likely.
>
> so either figure out the bug by review or try turning your IRQ#0 into a 
> screaming one for debug purposes. (hint: turning irq#0's trigger mode 
> from 'edge' to 'level' in mpparse.c or ioapic.c does wonders to that end 
> ;-)
>   

Hm.  I think the problem was that the patch changed the ordering so that 
the %ebp fault test was happening with interrupts disabled, meaning that 
any fault-in would happen with interrupts disabled.

Could you tell me if this revised patch still provokes a problem?

Thanks,
    J

Subject: x86: only enable interrupts when kernel state has been set up

The sysenter path tries to enable interrupts immediately.  Unfortunately
this doesn't work in a paravirt environment, because not enough kernel
state has been set up at that point (namely, pointing %fs to the kernel
percpu data segment).  To fix this, defer ENABLE_INTERRUPTS until after
the kernel state has been set up.

Unfortunately this means that we're running with interrupts disabled
for a while without calling the IRQ tracing code, but that can't be
called without setting up %fs either.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/entry_32.S |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

===================================================================
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -290,10 +290,10 @@ ENTRY(ia32_sysenter_target)
 	movl TSS_sysenter_sp0(%esp),%esp
 ENTRY(sysenter_past_esp)
 	/*
-	 * No need to follow this irqs on/off section: the syscall
-	 * disabled irqs and here we enable it straight after entry:
+	 * Interrupts are disabled here, but we can't trace it until
+	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
+	 * we immediately enable interrupts at that point anyway.
 	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushl $(__USER_DS)
 	CFI_ADJUST_CFA_OFFSET 4
 	/*CFI_REL_OFFSET ss, 0*/
@@ -314,6 +314,11 @@ ENTRY(sysenter_past_esp)
 	CFI_ADJUST_CFA_OFFSET 4
 	CFI_REL_OFFSET eip, 0
 
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
 /*
  * Load the potential sixth argument from user stack.
  * Careful about security.
@@ -321,14 +326,12 @@ ENTRY(sysenter_past_esp)
 	cmpl $__PAGE_OFFSET-3,%ebp
 	jae syscall_fault
 1:	movl (%ebp),%ebp
+	movl %ebp,PT_EBP(%esp)
 .section __ex_table,"a"
 	.align 4
 	.long 1b,syscall_fault
 .previous
 
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
@@ -542,9 +545,6 @@ END(syscall_exit_work)
 
 	RING0_INT_FRAME			# can't unwind into user space anyway
 syscall_fault:
-	pushl %eax			# save orig_eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 	movl $-EFAULT,PT_EAX(%esp)
 	jmp resume_userspace

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

>> so either figure out the bug by review or try turning your IRQ#0 into 
>> a screaming one for debug purposes. (hint: turning irq#0's trigger 
>> mode from 'edge' to 'level' in mpparse.c or ioapic.c does wonders to 
>> that end ;-)
>
> Hm.  I think the problem was that the patch changed the ordering so 
> that the %ebp fault test was happening with interrupts disabled, 
> meaning that any fault-in would happen with interrupts disabled.
>
> Could you tell me if this revised patch still provokes a problem?

it's looking good so far - queued it up.

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 471 bytes --]


* Ingo Molnar <mingo@elte.hu> wrote:

> > Hm.  I think the problem was that the patch changed the ordering so 
> > that the %ebp fault test was happening with interrupts disabled, 
> > meaning that any fault-in would happen with interrupts disabled.
> >
> > Could you tell me if this revised patch still provokes a problem?
> 
> it's looking good so far - queued it up.

it just crashed again, crashlog and config attached. This time it didnt 
need an irq flood.

	Ingo

[-- Attachment #2: crash.log --]
[-- Type: text/plain, Size: 104712 bytes --]

Linux version 2.6.25-rc6-sched-devel.git-x86-latest.git (mingo@dione) (gcc version 4.2.2) #321 SMP PREEMPT Fri Mar 21 15:12:31 CET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
debug: ignoring loglevel setting.
127MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f5680] 000f5680
CPU and/or kernel does not support PAT.
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262128
On node 0 totalpages: 262128
  DMA zone: 52 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4044 pages, LIFO batch:0
  Normal zone: 2860 pages used for memmap
  Normal zone: 222420 pages, LIFO batch:31
  HighMem zone: 415 pages used for memmap
  HighMem zone: 32337 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9500, 00A0 (r1 AMD    HAMMER          1 AMD         1)
ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37636 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258801
Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0
debug: sysrq always enabled.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
CPU 0 irqstacks, hard=c0711000 soft=c06f1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2010.322 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 992 kB
 per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023748k/1048512k available (3669k kernel code, 24164k reserved, 2068k data, 312k init, 131008k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc54000 - 0xfffff000   (3756 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc06a0000 - 0xc06ee000   ( 312 kB)
      .data : 0xc04957c8 - 0xc069ab9c   (2068 kB)
      .text : 0xc0100000 - 0xc04957c8   (3669 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4022.92 BogoMIPS (lpj=2011463)
Security Framework initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1256247
... PM timer delta = 357900
... PM timer result ok
..... delta 1256247
..... mult: 53963600
..... calibration result: 200999
..... CPU clock speed is 2009.0993 MHz.
..... host bus clock speed is 200.0999 MHz.
lockdep: fixing up alternatives.
CPU 1 irqstacks, hard=c0712000 soft=c06f2000
Booting processor 1/1 ip 4000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4019.91 BogoMIPS (lpj=2009958)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8042.84 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
Calling initcall 0xc06bf966: init_cpufreq_transition_notifier_list+0x0/0x11()
initcall 0xc06bf966: init_cpufreq_transition_notifier_list+0x0/0x11() returned 0.
initcall 0xc06bf966 ran for 0 msecs: init_cpufreq_transition_notifier_list+0x0/0x11()
Calling initcall 0xc06c31e5: net_ns_init+0x0/0xcd()
net_namespace: 608 bytes
initcall 0xc06c31e5: net_ns_init+0x0/0xcd() returned 0.
initcall 0xc06c31e5 ran for 0 msecs: net_ns_init+0x0/0xcd()
Calling initcall 0xc06a83ad: cpufreq_tsc+0x0/0x11()
initcall 0xc06a83ad: cpufreq_tsc+0x0/0x11() returned 0.
initcall 0xc06a83ad ran for 0 msecs: cpufreq_tsc+0x0/0x11()
Calling initcall 0xc06aabb4: reboot_init+0x0/0x11()
initcall 0xc06aabb4: reboot_init+0x0/0x11() returned 0.
initcall 0xc06aabb4 ran for 0 msecs: reboot_init+0x0/0x11()
Calling initcall 0xc06b132c: sysctl_init+0x0/0x29()
initcall 0xc06b132c: sysctl_init+0x0/0x29() returned 0.
initcall 0xc06b132c ran for 0 msecs: sysctl_init+0x0/0x29()
Calling initcall 0xc06b1997: ksysfs_init+0x0/0x96()
initcall 0xc06b1997: ksysfs_init+0x0/0x96() returned 0.
initcall 0xc06b1997 ran for 0 msecs: ksysfs_init+0x0/0x96()
Calling initcall 0xc06b1cc8: init_jiffies_clocksource+0x0/0xf()
initcall 0xc06b1cc8: init_jiffies_clocksource+0x0/0xf() returned 0.
initcall 0xc06b1cc8 ran for 0 msecs: init_jiffies_clocksource+0x0/0xf()
Calling initcall 0xc06b1fca: pm_init+0x0/0x2d()
initcall 0xc06b1fca: pm_init+0x0/0x2d() returned 0.
initcall 0xc06b1fca ran for 0 msecs: pm_init+0x0/0x2d()
Calling initcall 0xc06b4a64: filelock_init+0x0/0x27()
initcall 0xc06b4a64: filelock_init+0x0/0x27() returned 0.
initcall 0xc06b4a64 ran for 0 msecs: filelock_init+0x0/0x27()
Calling initcall 0xc06b52f2: init_misc_binfmt+0x0/0x33()
initcall 0xc06b52f2: init_misc_binfmt+0x0/0x33() returned 0.
initcall 0xc06b52f2 ran for 0 msecs: init_misc_binfmt+0x0/0x33()
Calling initcall 0xc06b5325: init_script_binfmt+0x0/0xf()
initcall 0xc06b5325: init_script_binfmt+0x0/0xf() returned 0.
initcall 0xc06b5325 ran for 0 msecs: init_script_binfmt+0x0/0xf()
Calling initcall 0xc06b5334: init_elf_binfmt+0x0/0xf()
initcall 0xc06b5334: init_elf_binfmt+0x0/0xf() returned 0.
initcall 0xc06b5334 ran for 0 msecs: init_elf_binfmt+0x0/0xf()
Calling initcall 0xc06b5c59: debugfs_init+0x0/0x41()
initcall 0xc06b5c59: debugfs_init+0x0/0x41() returned 0.
initcall 0xc06b5c59 ran for 0 msecs: debugfs_init+0x0/0x41()
Calling initcall 0xc06b5ffc: securityfs_init+0x0/0x41()
initcall 0xc06b5ffc: securityfs_init+0x0/0x41() returned 0.
initcall 0xc06b5ffc ran for 0 msecs: securityfs_init+0x0/0x41()
Calling initcall 0xc06b6f51: random32_init+0x0/0x48()
initcall 0xc06b6f51: random32_init+0x0/0x48() returned 0.
initcall 0xc06b6f51 ran for 0 msecs: random32_init+0x0/0x48()
Calling initcall 0xc06bf977: cpufreq_core_init+0x0/0x5a()
initcall 0xc06bf977: cpufreq_core_init+0x0/0x5a() returned 0.
initcall 0xc06bf977 ran for 0 msecs: cpufreq_core_init+0x0/0x5a()
Calling initcall 0xc06c30d5: sock_init+0x0/0x51()
initcall 0xc06c30d5: sock_init+0x0/0x51() returned 0.
initcall 0xc06c30d5 ran for 0 msecs: sock_init+0x0/0x51()
Calling initcall 0xc06c3900: netpoll_init+0x0/0x39()
initcall 0xc06c3900: netpoll_init+0x0/0x39() returned 0.
initcall 0xc06c3900 ran for 0 msecs: netpoll_init+0x0/0x39()
Calling initcall 0xc06c3c40: netlink_proto_init+0x0/0x102()
NET: Registered protocol family 16
initcall 0xc06c3c40: netlink_proto_init+0x0/0x102() returned 0.
initcall 0xc06c3c40 ran for 0 msecs: netlink_proto_init+0x0/0x102()
Calling initcall 0xc06b6e8f: kobject_uevent_init+0x0/0x3f()
initcall 0xc06b6e8f: kobject_uevent_init+0x0/0x3f() returned 0.
initcall 0xc06b6e8f ran for 0 msecs: kobject_uevent_init+0x0/0x3f()
Calling initcall 0xc06b7110: pcibus_class_init+0x0/0xf()
initcall 0xc06b7110: pcibus_class_init+0x0/0xf() returned 0.
initcall 0xc06b7110 ran for 0 msecs: pcibus_class_init+0x0/0xf()
Calling initcall 0xc06b7632: pci_driver_init+0x0/0xf()
initcall 0xc06b7632: pci_driver_init+0x0/0xf() returned 0.
initcall 0xc06b7632 ran for 0 msecs: pci_driver_init+0x0/0xf()
Calling initcall 0xc06b7918: backlight_class_init+0x0/0x3d()
initcall 0xc06b7918: backlight_class_init+0x0/0x3d() returned 0.
initcall 0xc06b7918 ran for 0 msecs: backlight_class_init+0x0/0x3d()
Calling initcall 0xc06b8c43: dock_init+0x0/0x4a()
No dock devices found.
initcall 0xc06b8c43: dock_init+0x0/0x4a() returned 0.
initcall 0xc06b8c43 ran for 0 msecs: dock_init+0x0/0x4a()
Calling initcall 0xc06bad09: tty_class_init+0x0/0x23()
initcall 0xc06bad09: tty_class_init+0x0/0x23() returned 0.
initcall 0xc06bad09 ran for 0 msecs: tty_class_init+0x0/0x23()
Calling initcall 0xc06bb543: vtconsole_class_init+0x0/0x9a()
initcall 0xc06bb543: vtconsole_class_init+0x0/0x9a() returned 0.
initcall 0xc06bb543 ran for 0 msecs: vtconsole_class_init+0x0/0x9a()
Calling initcall 0xc06a8150: arch_kdebugfs_init+0x0/0x7()
initcall 0xc06a8150: arch_kdebugfs_init+0x0/0x7() returned 0.
initcall 0xc06a8150 ran for 0 msecs: arch_kdebugfs_init+0x0/0x7()
Calling initcall 0xc06a828e: init_pit_clocksource+0x0/0x71()
initcall 0xc06a828e: init_pit_clocksource+0x0/0x71() returned 0.
initcall 0xc06a828e ran for 0 msecs: init_pit_clocksource+0x0/0x71()
Calling initcall 0xc06a8e39: mtrr_if_init+0x0/0x56()
initcall 0xc06a8e39: mtrr_if_init+0x0/0x56() returned 0.
initcall 0xc06a8e39 ran for 0 msecs: mtrr_if_init+0x0/0x56()
Calling initcall 0xc06aaae8: ffh_cstate_init+0x0/0x2c()
initcall 0xc06aaae8: ffh_cstate_init+0x0/0x2c() returned -1.
initcall 0xc06aaae8 ran for 0 msecs: ffh_cstate_init+0x0/0x2c()
initcall at 0xc06aaae8: ffh_cstate_init+0x0/0x2c(): returned with error code -1
Calling initcall 0xc06b77de: acpi_pci_init+0x0/0x3d()
ACPI: bus type pci registered
initcall 0xc06b77de: acpi_pci_init+0x0/0x3d() returned 0.
initcall 0xc06b77de ran for 0 msecs: acpi_pci_init+0x0/0x3d()
Calling initcall 0xc06b8951: init_acpi_device_notify+0x0/0x43()
initcall 0xc06b8951: init_acpi_device_notify+0x0/0x43() returned 0.
initcall 0xc06b8951 ran for 0 msecs: init_acpi_device_notify+0x0/0x43()
Calling initcall 0xc06c0270: dmi_id_init+0x0/0x266()
initcall 0xc06c0270: dmi_id_init+0x0/0x266() returned 0.
initcall 0xc06c0270 ran for 0 msecs: dmi_id_init+0x0/0x266()
Calling initcall 0xc06c04d6: init_cyclone_clocksource+0x0/0x169()
initcall 0xc06c04d6: init_cyclone_clocksource+0x0/0x169() returned -19.
initcall 0xc06c04d6 ran for 0 msecs: init_cyclone_clocksource+0x0/0x169()
Calling initcall 0xc06c1a10: pci_access_init+0x0/0x40()
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
initcall 0xc06c1a10: pci_access_init+0x0/0x40() returned 0.
initcall 0xc06c1a10 ran for 3 msecs: pci_access_init+0x0/0x40()
Calling initcall 0xc06a696b: request_standard_resources+0x0/0x57()
Setting up standard PCI resources
initcall 0xc06a696b: request_standard_resources+0x0/0x57() returned 0.
initcall 0xc06a696b ran for 4 msecs: request_standard_resources+0x0/0x57()
Calling initcall 0xc06a8121: topology_init+0x0/0x2f()
initcall 0xc06a8121: topology_init+0x0/0x2f() returned 0.
initcall 0xc06a8121 ran for 0 msecs: topology_init+0x0/0x2f()
Calling initcall 0xc06a8add: mtrr_init_finialize+0x0/0x2c()
initcall 0xc06a8add: mtrr_init_finialize+0x0/0x2c() returned 0.
initcall 0xc06a8add ran for 0 msecs: mtrr_init_finialize+0x0/0x2c()
Calling initcall 0xc06b1693: param_sysfs_init+0x0/0x153()
initcall 0xc06b1693: param_sysfs_init+0x0/0x153() returned 0.
initcall 0xc06b1693 ran for 4 msecs: param_sysfs_init+0x0/0x153()
Calling initcall 0xc015fa70: pm_sysrq_init+0x0/0x16()
initcall 0xc015fa70: pm_sysrq_init+0x0/0x16() returned 0.
initcall 0xc015fa70 ran for 0 msecs: pm_sysrq_init+0x0/0x16()
Calling initcall 0xc06b41b8: readahead_init+0x0/0xf()
initcall 0xc06b41b8: readahead_init+0x0/0xf() returned 0.
initcall 0xc06b41b8 ran for 0 msecs: readahead_init+0x0/0xf()
Calling initcall 0xc06b4fe1: init_bio+0x0/0xa6()
initcall 0xc06b4fe1: init_bio+0x0/0xa6() returned 0.
initcall 0xc06b4fe1 ran for 0 msecs: init_bio+0x0/0xa6()
Calling initcall 0xc06b6c10: blk_settings_init+0x0/0x1d()
initcall 0xc06b6c10: blk_settings_init+0x0/0x1d() returned 0.
initcall 0xc06b6c10 ran for 0 msecs: blk_settings_init+0x0/0x1d()
Calling initcall 0xc06b6c2d: blk_ioc_init+0x0/0x24()
initcall 0xc06b6c2d: blk_ioc_init+0x0/0x24() returned 0.
initcall 0xc06b6c2d ran for 0 msecs: blk_ioc_init+0x0/0x24()
Calling initcall 0xc06b6c51: genhd_device_init+0x0/0x32()
initcall 0xc06b6c51: genhd_device_init+0x0/0x32() returned 0.
initcall 0xc06b6c51 ran for 0 msecs: genhd_device_init+0x0/0x32()
Calling initcall 0xc06b781b: fbmem_init+0x0/0x7c()
initcall 0xc06b781b: fbmem_init+0x0/0x7c() returned 0.
initcall 0xc06b781b ran for 0 msecs: fbmem_init+0x0/0x7c()
Calling initcall 0xc06b8735: acpi_init+0x0/0x21c()
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
initcall 0xc06b8735: acpi_init+0x0/0x21c() returned 0.
initcall 0xc06b8735 ran for 14 msecs: acpi_init+0x0/0x21c()
Calling initcall 0xc06b8994: acpi_scan_init+0x0/0xed()
initcall 0xc06b8994: acpi_scan_init+0x0/0xed() returned 0.
initcall 0xc06b8994 ran for 12 msecs: acpi_scan_init+0x0/0xed()
Calling initcall 0xc06b8a81: acpi_ec_init+0x0/0x55()
initcall 0xc06b8a81: acpi_ec_init+0x0/0x55() returned 0.
initcall 0xc06b8a81 ran for 0 msecs: acpi_ec_init+0x0/0x55()
Calling initcall 0xc06b8c8d: acpi_pci_root_init+0x0/0x25()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
initcall 0xc06b8c8d: acpi_pci_root_init+0x0/0x25() returned 0.
initcall 0xc06b8c8d ran for 73 msecs: acpi_pci_root_init+0x0/0x25()
Calling initcall 0xc06b8d8b: acpi_pci_link_init+0x0/0x43()
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall 0xc06b8d8b: acpi_pci_link_init+0x0/0x43() returned 0.
initcall 0xc06b8d8b ran for 118 msecs: acpi_pci_link_init+0x0/0x43()
Calling initcall 0xc06b8e4d: acpi_power_init+0x0/0x69()
initcall 0xc06b8e4d: acpi_power_init+0x0/0x69() returned 0.
initcall 0xc06b8e4d ran for 0 msecs: acpi_power_init+0x0/0x69()
Calling initcall 0xc06b903d: acpi_system_init+0x0/0x1fe()
initcall 0xc06b903d: acpi_system_init+0x0/0x1fe() returned 0.
initcall 0xc06b903d ran for 0 msecs: acpi_system_init+0x0/0x1fe()
Calling initcall 0xc06b92aa: acpi_cm_sbs_init+0x0/0x7()
initcall 0xc06b92aa: acpi_cm_sbs_init+0x0/0x7() returned 0.
initcall 0xc06b92aa ran for 0 msecs: acpi_cm_sbs_init+0x0/0x7()
Calling initcall 0xc06b92b1: pnp_init+0x0/0x19()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall 0xc06b92b1: pnp_init+0x0/0x19() returned 0.
initcall 0xc06b92b1 ran for 0 msecs: pnp_init+0x0/0x19()
Calling initcall 0xc06b947e: pnpacpi_init+0x0/0x7b()
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
initcall 0xc06b947e: pnpacpi_init+0x0/0x7b() returned 0.
initcall 0xc06b947e ran for 11 msecs: pnpacpi_init+0x0/0x7b()
Calling initcall 0xc06bb0e1: misc_init+0x0/0x71()
initcall 0xc06bb0e1: misc_init+0x0/0x71() returned 0.
initcall 0xc06bb0e1 ran for 0 msecs: misc_init+0x0/0x71()
Calling initcall 0xc04742e3: cn_init+0x0/0xaf()
initcall 0xc04742e3: cn_init+0x0/0xaf() returned 0.
initcall 0xc04742e3 ran for 0 msecs: cn_init+0x0/0xaf()
Calling initcall 0xc06bd673: init_scsi+0x0/0x89()
SCSI subsystem initialized
initcall 0xc06bd673: init_scsi+0x0/0x89() returned 0.
initcall 0xc06bd673 ran for 0 msecs: init_scsi+0x0/0x89()
Calling initcall 0xc06bdead: ata_init+0x0/0x2b3()
libata version 3.00 loaded.
initcall 0xc06bdead: ata_init+0x0/0x2b3() returned 0.
initcall 0xc06bdead ran for 0 msecs: ata_init+0x0/0x2b3()
Calling initcall 0xc06bebba: init_pcmcia_cs+0x0/0x31()
initcall 0xc06bebba: init_pcmcia_cs+0x0/0x31() returned 0.
initcall 0xc06bebba ran for 0 msecs: init_pcmcia_cs+0x0/0x31()
Calling initcall 0xc06bece3: usb_init+0x0/0x10d()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall 0xc06bece3: usb_init+0x0/0x10d() returned 0.
initcall 0xc06bece3 ran for 2 msecs: usb_init+0x0/0x10d()
Calling initcall 0xc06bf1ea: serio_init+0x0/0x82()
initcall 0xc06bf1ea: serio_init+0x0/0x82() returned 0.
initcall 0xc06bf1ea ran for 0 msecs: serio_init+0x0/0x82()
Calling initcall 0xc06bf5c7: input_init+0x0/0xf3()
initcall 0xc06bf5c7: input_init+0x0/0xf3() returned 0.
initcall 0xc06bf5c7 ran for 0 msecs: input_init+0x0/0xf3()
Calling initcall 0xc06bf843: power_supply_class_init+0x0/0x29()
initcall 0xc06bf843: power_supply_class_init+0x0/0x29() returned 0.
initcall 0xc06bf843 ran for 0 msecs: power_supply_class_init+0x0/0x29()
Calling initcall 0xc06bf86c: thermal_init+0x0/0x41()
initcall 0xc06bf86c: thermal_init+0x0/0x41() returned 0.
initcall 0xc06bf86c ran for 0 msecs: thermal_init+0x0/0x41()
Calling initcall 0xc06bf8ad: md_init+0x0/0xb9()
initcall 0xc06bf8ad: md_init+0x0/0xb9() returned 0.
initcall 0xc06bf8ad ran for 0 msecs: md_init+0x0/0xb9()
Calling initcall 0xc06bf9ef: leds_init+0x0/0x23()
initcall 0xc06bf9ef: leds_init+0x0/0x23() returned 0.
initcall 0xc06bf9ef ran for 0 msecs: leds_init+0x0/0x23()
Calling initcall 0xc06c1704: ac97_bus_init+0x0/0xf()
initcall 0xc06c1704: ac97_bus_init+0x0/0xf() returned 0.
initcall 0xc06c1704 ran for 0 msecs: ac97_bus_init+0x0/0xf()
Calling initcall 0xc06c26a0: pci_acpi_init+0x0/0x98()
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
.......    : physical APIC id: 00
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 003 03  1    0    0   0   0    0    0    00
 01 003 03  1    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    41
 03 003 03  1    0    0   0   0    1    1    49
 04 003 03  1    0    0   0   0    1    1    51
 05 003 03  1    0    0   0   0    1    1    59
 06 003 03  1    0    0   0   0    1    1    61
 07 003 03  1    0    0   0   0    1    1    69
 08 003 03  1    0    0   0   0    1    1    71
 09 003 03  0    1    0   0   0    1    1    79
 0a 003 03  1    0    0   0   0    1    1    81
 0b 003 03  1    0    0   0   0    1    1    89
 0c 003 03  1    0    0   0   0    1    1    91
 0d 003 03  1    0    0   0   0    1    1    99
 0e 003 03  0    0    0   0   0    1    1    A1
 0f 003 03  0    0    0   0   0    1    1    A9
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall 0xc06c26a0: pci_acpi_init+0x0/0x98() returned 0.
initcall 0xc06c26a0 ran for 82 msecs: pci_acpi_init+0x0/0x98()
Calling initcall 0xc06c2738: pci_legacy_init+0x0/0xd7()
initcall 0xc06c2738: pci_legacy_init+0x0/0xd7() returned 0.
initcall 0xc06c2738 ran for 0 msecs: pci_legacy_init+0x0/0xd7()
Calling initcall 0xc06c2c15: pcibios_irq_init+0x0/0x444()
initcall 0xc06c2c15: pcibios_irq_init+0x0/0x444() returned 0.
initcall 0xc06c2c15 ran for 0 msecs: pcibios_irq_init+0x0/0x444()
Calling initcall 0xc06c3059: pcibios_init+0x0/0x7c()
initcall 0xc06c3059: pcibios_init+0x0/0x7c() returned 0.
initcall 0xc06c3059 ran for 0 msecs: pcibios_init+0x0/0x7c()
Calling initcall 0xc06c317c: proto_init+0x0/0x27()
initcall 0xc06c317c: proto_init+0x0/0x27() returned 0.
initcall 0xc06c317c ran for 0 msecs: proto_init+0x0/0x27()
Calling initcall 0xc06c34e5: net_dev_init+0x0/0x13c()
initcall 0xc06c34e5: net_dev_init+0x0/0x13c() returned 0.
initcall 0xc06c34e5 ran for 0 msecs: net_dev_init+0x0/0x13c()
Calling initcall 0xc06c365e: neigh_init+0x0/0x66()
initcall 0xc06c365e: neigh_init+0x0/0x66() returned 0.
initcall 0xc06c365e ran for 0 msecs: neigh_init+0x0/0x66()
Calling initcall 0xc06c3939: fib_rules_init+0x0/0x99()
initcall 0xc06c3939: fib_rules_init+0x0/0x99() returned 0.
initcall 0xc06c3939 ran for 0 msecs: fib_rules_init+0x0/0x99()
Calling initcall 0xc06c3ae3: pktsched_init+0x0/0xa9()
initcall 0xc06c3ae3: pktsched_init+0x0/0xa9() returned 0.
initcall 0xc06c3ae3 ran for 0 msecs: pktsched_init+0x0/0xa9()
Calling initcall 0xc06c3b9b: tc_filter_init+0x0/0x43()
initcall 0xc06c3b9b: tc_filter_init+0x0/0x43() returned 0.
initcall 0xc06c3b9b ran for 0 msecs: tc_filter_init+0x0/0x43()
Calling initcall 0xc06c3bde: tc_action_init+0x0/0x43()
initcall 0xc06c3bde: tc_action_init+0x0/0x43() returned 0.
initcall 0xc06c3bde ran for 0 msecs: tc_action_init+0x0/0x43()
Calling initcall 0xc06c3d42: genl_init+0x0/0xad()
initcall 0xc06c3d42: genl_init+0x0/0xad() returned 0.
initcall 0xc06c3d42 ran for 5 msecs: genl_init+0x0/0xad()
Calling initcall 0xc06c51e1: cipso_v4_init+0x0/0x6d()
initcall 0xc06c51e1: cipso_v4_init+0x0/0x6d() returned 0.
initcall 0xc06c51e1 ran for 0 msecs: cipso_v4_init+0x0/0x6d()
Calling initcall 0xc06c5551: wireless_nlevent_init+0x0/0x39()
initcall 0xc06c5551: wireless_nlevent_init+0x0/0x39() returned 0.
initcall 0xc06c5551 ran for 0 msecs: wireless_nlevent_init+0x0/0x39()
Calling initcall 0xc06c55a6: netlbl_init+0x0/0x6d()
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
initcall 0xc06c55a6: netlbl_init+0x0/0x6d() returned 0.
initcall 0xc06c55a6 ran for 3 msecs: netlbl_init+0x0/0x6d()
Calling initcall 0xc06c58a1: sysctl_init+0x0/0x23()
initcall 0xc06c58a1: sysctl_init+0x0/0x23() returned 0.
initcall 0xc06c58a1 ran for 0 msecs: sysctl_init+0x0/0x23()
Calling initcall 0xc06af506: hpet_late_init+0x0/0xfc()
initcall 0xc06af506: hpet_late_init+0x0/0xfc() returned -19.
initcall 0xc06af506 ran for 0 msecs: hpet_late_init+0x0/0xfc()
Calling initcall 0xc06b1bfb: clocksource_done_booting+0x0/0x11()
initcall 0xc06b1bfb: clocksource_done_booting+0x0/0x11() returned 0.
initcall 0xc06b1bfb ran for 0 msecs: clocksource_done_booting+0x0/0x11()
Calling initcall 0xc06b49ff: init_pipe_fs+0x0/0x41()
initcall 0xc06b49ff: init_pipe_fs+0x0/0x41() returned 0.
initcall 0xc06b49ff ran for 0 msecs: init_pipe_fs+0x0/0x41()
Calling initcall 0xc06b5196: eventpoll_init+0x0/0x7d()
initcall 0xc06b5196: eventpoll_init+0x0/0x7d() returned 0.
initcall 0xc06b5196 ran for 0 msecs: eventpoll_init+0x0/0x7d()
Calling initcall 0xc06b5213: anon_inode_init+0x0/0xdf()
initcall 0xc06b5213: anon_inode_init+0x0/0xdf() returned 0.
initcall 0xc06b5213 ran for 0 msecs: anon_inode_init+0x0/0xdf()
Calling initcall 0xc06b923b: acpi_event_init+0x0/0x6f()
initcall 0xc06b923b: acpi_event_init+0x0/0x6f() returned 0.
initcall 0xc06b923b ran for 5 msecs: acpi_event_init+0x0/0x6f()
Calling initcall 0xc06b93a2: pnp_system_init+0x0/0xf()
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
system 00:0f: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:0f: iomem range 0xffff0000-0xffffffff could not be reserved
Clocksource tsc unstable (delta = 564025945 ns)
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0f: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0f: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0f: iomem range 0xfff80000-0xfff80fff could not be reserved
initcall 0xc06b93a2: pnp_system_init+0x0/0xf() returned 0.
initcall 0xc06b93a2 ran for 20 msecs: pnp_system_init+0x0/0xf()
Calling initcall 0xc06bac50: chr_dev_init+0x0/0x86()
initcall 0xc06bac50: chr_dev_init+0x0/0x86() returned 0.
initcall 0xc06bac50 ran for 0 msecs: chr_dev_init+0x0/0x86()
Calling initcall 0xc06bc644: firmware_class_init+0x0/0x5c()
initcall 0xc06bc644: firmware_class_init+0x0/0x5c() returned 0.
initcall 0xc06bc644 ran for 0 msecs: firmware_class_init+0x0/0x5c()
Calling initcall 0xc06bd445: loopback_init+0x0/0xf()
initcall 0xc06bd445: loopback_init+0x0/0xf() returned 0.
initcall 0xc06bd445 ran for 0 msecs: loopback_init+0x0/0xf()
Calling initcall 0xc06bebeb: init_pcmcia_bus+0x0/0x6c()
initcall 0xc06bebeb: init_pcmcia_bus+0x0/0x6c() returned 0.
initcall 0xc06bebeb ran for 0 msecs: init_pcmcia_bus+0x0/0x6c()
Calling initcall 0xc06bf9d1: cpufreq_gov_performance_init+0x0/0xf()
initcall 0xc06bf9d1: cpufreq_gov_performance_init+0x0/0xf() returned 0.
initcall 0xc06bf9d1 ran for 0 msecs: cpufreq_gov_performance_init+0x0/0xf()
Calling initcall 0xc06bf9e0: cpufreq_gov_userspace_init+0x0/0xf()
initcall 0xc06bf9e0: cpufreq_gov_userspace_init+0x0/0xf() returned 0.
initcall 0xc06bf9e0 ran for 0 msecs: cpufreq_gov_userspace_init+0x0/0xf()
Calling initcall 0xc06c0653: init_acpi_pm_clocksource+0x0/0x148()
initcall 0xc06c0653<6>Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
: init_acpi_pm_clocksource+0x0/0x148() returned 0.
initcall 0xc06c0653 ran for 28 msecs: init_acpi_pm_clocksource+0x0/0x148()
Calling initcall 0xc06c1763: pcibios_assign_resources+0x0/0x91()
PCI: Bridge: 0000:00:09.0
  IO window: c000-cfff
  MEM window: 0xda000000-0xda0fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
  IO window: b000-bfff
  MEM window: 0xd8000000-0xd9ffffff
  PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall 0xc06c1763: pcibios_assign_resources+0x0/0x91() returned 0.
initcall 0xc06c1763 ran for 72 msecs: pcibios_assign_resources+0x0/0x91()
Calling initcall 0xc06c4ada: inet_init+0x0/0x36e()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall 0xc06c4ada: inet_init+0x0/0x36e() returned 0.
initcall 0xc06c4ada ran for 54 msecs: inet_init+0x0/0x36e()
Calling initcall 0xc06a5747: populate_rootfs+0x0/0xcd()
initcall 0xc06a5747: populate_rootfs+0x0/0xcd() returned 0.
initcall 0xc06a5747 ran for 0 msecs: populate_rootfs+0x0/0xcd()
Calling initcall 0xc06a5b52: vmx_init+0x0/0xec()
kvm: no hardware support
initcall 0xc06a5b52: vmx_init+0x0/0xec() returned -95.
initcall 0xc06a5b52 ran for 2 msecs: vmx_init+0x0/0xec()
initcall at 0xc06a5b52: vmx_init+0x0/0xec(): returned with error code -95
Calling initcall 0xc06a5c3e: svm_init+0x0/0x16()
has_svm: svm not available
kvm: no hardware support
initcall 0xc06a5c3e: svm_init+0x0/0x16() returned -95.
initcall 0xc06a5c3e ran for 4 msecs: svm_init+0x0/0x16()
initcall at 0xc06a5c3e: svm_init+0x0/0x16(): returned with error code -95
Calling initcall 0xc06a70c2: i8259A_init_sysfs+0x0/0x1d()
initcall 0xc06a70c2: i8259A_init_sysfs+0x0/0x1d() returned 0.
initcall 0xc06a70c2 ran for 0 msecs: i8259A_init_sysfs+0x0/0x1d()
Calling initcall 0xc06a72c5: sbf_init+0x0/0xbd()
initcall 0xc06a72c5: sbf_init+0x0/0xbd() returned 0.
initcall 0xc06a72c5 ran for 0 msecs: sbf_init+0x0/0xbd()
Calling initcall 0xc06a8104: i8237A_init_sysfs+0x0/0x1d()
initcall 0xc06a8104: i8237A_init_sysfs+0x0/0x1d() returned 0.
initcall 0xc06a8104 ran for 0 msecs: i8237A_init_sysfs+0x0/0x1d()
Calling initcall 0xc0489429: cache_sysfs_init+0x0/0x4e()
initcall 0xc0489429: cache_sysfs_init+0x0/0x4e() returned 0.
initcall 0xc0489429 ran for 0 msecs: cache_sysfs_init+0x0/0x4e()
Calling initcall 0xc06a8a5c: thermal_throttle_init_device+0x0/0x70()
initcall 0xc06a8a5c: thermal_throttle_init_device+0x0/0x70() returned 0.
initcall 0xc06a8a5c ran for 0 msecs: thermal_throttle_init_device+0x0/0x70()
Calling initcall 0xc06a9785: longrun_init+0x0/0x2d()
initcall 0xc06a9785: longrun_init+0x0/0x2d() returned -19.
initcall 0xc06a9785 ran for 0 msecs: longrun_init+0x0/0x2d()
Calling initcall 0xc06a9a6a: speedstep_init+0x0/0x1e8()
initcall 0xc06a9a6a: speedstep_init+0x0/0x1e8() returned -19.
initcall 0xc06a9a6a ran for 0 msecs: speedstep_init+0x0/0x1e8()
Calling initcall 0xc06a9c52: speedstep_init+0x0/0xf4()
initcall 0xc06a9c52: speedstep_init+0x0/0xf4() returned -19.
initcall 0xc06a9c52 ran for 0 msecs: speedstep_init+0x0/0xf4()
Calling initcall 0xc06ab1aa: apm_init+0x0/0x37a()
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
initcall 0xc06ab1aa: apm_init+0x0/0x37a() returned -19.
initcall 0xc06ab1aa ran for 7 msecs: apm_init+0x0/0x37a()
Calling initcall 0xc06ac3fe: init_lapic_sysfs+0x0/0x28()
initcall 0xc06ac3fe: init_lapic_sysfs+0x0/0x28() returned 0.
initcall 0xc06ac3fe ran for 0 msecs: init_lapic_sysfs+0x0/0x28()
Calling initcall 0xc06ae563: ioapic_init_sysfs+0x0/0xb7()
initcall 0xc06ae563: ioapic_init_sysfs+0x0/0xb7() returned 0.
initcall 0xc06ae563 ran for 0 msecs: ioapic_init_sysfs+0x0/0xb7()
Calling initcall 0xc06af635: add_pcspkr+0x0/0x35()
initcall 0xc06af635: add_pcspkr+0x0/0x35() returned 0.
initcall 0xc06af635 ran for 0 msecs: add_pcspkr+0x0/0x35()
Calling initcall 0xc06b0148: init+0x0/0x90()
mmiotrace: load...
initcall 0xc06b0148: init+0x0/0x90() returned 0.
initcall 0xc06b0148 ran for 1 msecs: init+0x0/0x90()
Calling initcall 0xc06b061d: init_sched_debug_procfs+0x0/0x2a()
initcall 0xc06b061d: init_sched_debug_procfs+0x0/0x2a() returned 0.
initcall 0xc06b061d ran for 0 msecs: init_sched_debug_procfs+0x0/0x2a()
Calling initcall 0xc06b0fb6: create_proc_profile+0x0/0x17b()
initcall 0xc06b0fb6: create_proc_profile+0x0/0x17b() returned 0.
initcall 0xc06b0fb6 ran for 0 msecs: create_proc_profile+0x0/0x17b()
Calling initcall 0xc06b122c: ioresources_init+0x0/0x39()
initcall 0xc06b122c: ioresources_init+0x0/0x39() returned 0.
initcall 0xc06b122c ran for 0 msecs: ioresources_init+0x0/0x39()
Calling initcall 0xc06b13a0: uid_cache_init+0x0/0x5e()
initcall 0xc06b13a0: uid_cache_init+0x0/0x5e() returned 0.
initcall 0xc06b13a0 ran for 0 msecs: uid_cache_init+0x0/0x5e()
Calling initcall 0xc06b17e6: init_posix_timers+0x0/0x7c()
initcall 0xc06b17e6: init_posix_timers+0x0/0x7c() returned 0.
initcall 0xc06b17e6 ran for 0 msecs: init_posix_timers+0x0/0x7c()
Calling initcall 0xc06b1862: init_posix_cpu_timers+0x0/0x90()
initcall 0xc06b1862: init_posix_cpu_timers+0x0/0x90() returned 0.
initcall 0xc06b1862 ran for 0 msecs: init_posix_cpu_timers+0x0/0x90()
Calling initcall 0xc06b1970: nsproxy_cache_init+0x0/0x27()
initcall 0xc06b1970: nsproxy_cache_init+0x0/0x27() returned 0.
initcall 0xc06b1970 ran for 0 msecs: nsproxy_cache_init+0x0/0x27()
Calling initcall 0xc06b1a81: timekeeping_init_device+0x0/0x1d()
initcall 0xc06b1a81: timekeeping_init_device+0x0/0x1d() returned 0.
initcall 0xc06b1a81 ran for 0 msecs: timekeeping_init_device+0x0/0x1d()
Calling initcall 0xc06b1c0c: init_clocksource_sysfs+0x0/0x43()
initcall 0xc06b1c0c: init_clocksource_sysfs+0x0/0x43() returned 0.
initcall 0xc06b1c0c ran for 0 msecs: init_clocksource_sysfs+0x0/0x43()
Calling initcall 0xc06b1cd7: init_timer_list_procfs+0x0/0x2a()
initcall 0xc06b1cd7: init_timer_list_procfs+0x0/0x2a() returned 0.
initcall 0xc06b1cd7 ran for 0 msecs: init_timer_list_procfs+0x0/0x2a()
Calling initcall 0xc06b1d58: init_tstats_procfs+0x0/0x2a()
initcall 0xc06b1d58: init_tstats_procfs+0x0/0x2a() returned 0.
initcall 0xc06b1d58 ran for 0 msecs: init_tstats_procfs+0x0/0x2a()
Calling initcall 0xc06b1e61: lockdep_proc_init+0x0/0x3f()
initcall 0xc06b1e61: lockdep_proc_init+0x0/0x3f() returned 0.
initcall 0xc06b1e61 ran for 0 msecs: lockdep_proc_init+0x0/0x3f()
Calling initcall 0xc06b1ea0: init+0x0/0xb0()
initcall 0xc06b1ea0: init+0x0/0xb0() returned 0.
initcall 0xc06b1ea0 ran for 0 msecs: init+0x0/0xb0()
Calling initcall 0xc015a85c: init_rttest+0x0/0x102()
Initializing RT-Tester: OK
initcall 0xc015a85c: init_rttest+0x0/0x102() returned 0.
initcall 0xc015a85c ran for 3 msecs: init_rttest+0x0/0x102()
Calling initcall 0xc06b1f50: proc_dma_init+0x0/0x20()
initcall 0xc06b1f50: proc_dma_init+0x0/0x20() returned 0.
initcall 0xc06b1f50 ran for 0 msecs: proc_dma_init+0x0/0x20()
Calling initcall 0xc015b9b1: percpu_modinit+0x0/0x64()
initcall 0xc015b9b1: percpu_modinit+0x0/0x64() returned 0.
initcall 0xc015b9b1 ran for 0 msecs: percpu_modinit+0x0/0x64()
Calling initcall 0xc06b1fa7: kallsyms_init+0x0/0x23()
initcall 0xc06b1fa7: kallsyms_init+0x0/0x23() returned 0.
initcall 0xc06b1fa7 ran for 0 msecs: kallsyms_init+0x0/0x23()
Calling initcall 0xc06b202d: crash_save_vmcoreinfo_init+0x0/0x2e0()
initcall 0xc06b202d: crash_save_vmcoreinfo_init+0x0/0x2e0() returned 0.
initcall 0xc06b202d ran for 0 msecs: crash_save_vmcoreinfo_init+0x0/0x2e0()
Calling initcall 0xc06b1ff7: crash_notes_memory_init+0x0/0x36()
initcall 0xc06b1ff7: crash_notes_memory_init+0x0/0x36() returned 0.
initcall 0xc06b1ff7 ran for 0 msecs: crash_notes_memory_init+0x0/0x36()
Calling initcall 0xc06b25a9: audit_init+0x0/0x10d()
audit: initializing netlink socket (disabled)
type=2000 audit(1206112927.154:1): initialized
initcall 0xc06b25a9: audit_init+0x0/0x10d() returned 0.
initcall 0xc06b25a9 ran for 7 msecs: audit_init+0x0/0x10d()
Calling initcall 0xc06b272b: audit_tree_init+0x0/0x3b()
initcall 0xc06b272b: audit_tree_init+0x0/0x3b() returned 0.
initcall 0xc06b272b ran for 0 msecs: audit_tree_init+0x0/0x3b()
Calling initcall 0xc06b2766: init_kprobes+0x0/0x7d()
initcall 0xc06b2766: init_kprobes+0x0/0x7d() returned 0.
initcall 0xc06b2766 ran for 0 msecs: init_kprobes+0x0/0x7d()
Calling initcall 0xc06b2a05: relay_init+0x0/0x11()
initcall 0xc06b2a05: relay_init+0x0/0x11() returned 0.
initcall 0xc06b2a05 ran for 0 msecs: relay_init+0x0/0x11()
Calling initcall 0xc06b2a16: utsname_sysctl_init+0x0/0x11()
initcall 0xc06b2a16: utsname_sysctl_init+0x0/0x11() returned 0.
initcall 0xc06b2a16 ran for 0 msecs: utsname_sysctl_init+0x0/0x11()
Calling initcall 0xc06b3757: init_per_zone_pages_min+0x0/0x3c()
initcall 0xc06b3757: init_per_zone_pages_min+0x0/0x3c() returned 0.
initcall 0xc06b3757 ran for 0 msecs: init_per_zone_pages_min+0x0/0x3c()
Calling initcall 0xc06b41a2: pdflush_init+0x0/0x16()
initcall 0xc06b41a2: pdflush_init+0x0/0x16() returned 0.
initcall 0xc06b41a2 ran for 0 msecs: pdflush_init+0x0/0x16()
Calling initcall 0xc06b41f8: kswapd_init+0x0/0x1d()
initcall 0xc06b41f8: kswapd_init+0x0/0x1d() returned 0.
initcall 0xc06b41f8 ran for 0 msecs: kswapd_init+0x0/0x1d()
Calling initcall 0xc06b4215: setup_vmstat+0x0/0x3e()
initcall 0xc06b4215: setup_vmstat+0x0/0x3e() returned 0.
initcall 0xc06b4215 ran for 0 msecs: setup_vmstat+0x0/0x3e()
Calling initcall 0xc06b4319: init_emergency_pool+0x0/0x57()
highmem bounce pool size: 64 pages
initcall 0xc06b4319: init_emergency_pool+0x0/0x57() returned 0.
initcall 0xc06b4319 ran for 2 msecs: init_emergency_pool+0x0/0x57()
Calling initcall 0xc06b4370: procswaps_init+0x0/0x20()
initcall 0xc06b4370: procswaps_init+0x0/0x20() returned 0.
initcall 0xc06b4370 ran for 0 msecs: procswaps_init+0x0/0x20()
Calling initcall 0xc06b4390: hugetlb_init+0x0/0x72()
Total HugeTLB memory allocated, 0
initcall 0xc06b4390: hugetlb_init+0x0/0x72() returned 0.
initcall 0xc06b4390 ran for 2 msecs: hugetlb_init+0x0/0x72()
Calling initcall 0xc06b4430: init_tmpfs+0x0/0xb9()
initcall 0xc06b4430: init_tmpfs+0x0/0xb9() returned 0.
initcall 0xc06b4430 ran for 0 msecs: init_tmpfs+0x0/0xb9()
Calling initcall 0xc06b452e: cpucache_init+0x0/0x2f()
initcall 0xc06b452e: cpucache_init+0x0/0x2f() returned 0.
initcall 0xc06b452e ran for 0 msecs: cpucache_init+0x0/0x2f()
Calling initcall 0xc06b4a40: fasync_init+0x0/0x24()
initcall 0xc06b4a40: fasync_init+0x0/0x24() returned 0.
initcall 0xc06b4a40 ran for 0 msecs: fasync_init+0x0/0x24()
Calling initcall 0xc06b4f31: aio_setup+0x0/0x64()
initcall 0xc06b4f31: aio_setup+0x0/0x64() returned 0.
initcall 0xc06b4f31 ran for 0 msecs: aio_setup+0x0/0x64()
Calling initcall 0xc06b50ed: inotify_setup+0x0/0x11()
initcall 0xc06b50ed: inotify_setup+0x0/0x11() returned 0.
initcall 0xc06b50ed ran for 0 msecs: inotify_setup+0x0/0x11()
Calling initcall 0xc06b50fe: inotify_user_setup+0x0/0x98()
initcall 0xc06b50fe: inotify_user_setup+0x0/0x98() returned 0.
initcall 0xc06b50fe ran for 0 msecs: inotify_user_setup+0x0/0x98()
Calling initcall 0xc06b5343: init_mbcache+0x0/0x11()
initcall 0xc06b5343: init_mbcache+0x0/0x11() returned 0.
initcall 0xc06b5343 ran for 0 msecs: init_mbcache+0x0/0x11()
Calling initcall 0xc06b5354: dquot_init+0x0/0xc1()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall 0xc06b5354: dquot_init+0x0/0xc1() returned 0.
initcall 0xc06b5354 ran for 7 msecs: dquot_init+0x0/0xc1()
Calling initcall 0xc06b5415: init_v2_quota_format+0x0/0xf()
initcall 0xc06b5415: init_v2_quota_format+0x0/0xf() returned 0.
initcall 0xc06b5415 ran for 0 msecs: init_v2_quota_format+0x0/0xf()
Calling initcall 0xc06b5424: dnotify_init+0x0/0x24()
initcall 0xc06b5424: dnotify_init+0x0/0x24() returned 0.
initcall 0xc06b5424 ran for 0 msecs: dnotify_init+0x0/0x24()
Calling initcall 0xc06b58c4: init_devpts_fs+0x0/0x32()
initcall 0xc06b58c4: init_devpts_fs+0x0/0x32() returned 0.
initcall 0xc06b58c4 ran for 0 msecs: init_devpts_fs+0x0/0x32()
Calling initcall 0xc06b58f6: init_ext3_fs+0x0/0x5f()
initcall 0xc06b58f6: init_ext3_fs+0x0/0x5f() returned 0.
initcall 0xc06b58f6 ran for 0 msecs: init_ext3_fs+0x0/0x5f()
Calling initcall 0xc06b59eb: journal_init+0x0/0x85()
initcall 0xc06b59eb: journal_init+0x0/0x85() returned 0.
initcall 0xc06b59eb ran for 0 msecs: journal_init+0x0/0x85()
Calling initcall 0xc06b5a70: init_ext2_fs+0x0/0x5f()
initcall 0xc06b5a70: init_ext2_fs+0x0/0x5f() returned 0.
initcall 0xc06b5a70 ran for 0 msecs: init_ext2_fs+0x0/0x5f()
Calling initcall 0xc06b5af8: init_ramfs_fs+0x0/0xf()
initcall 0xc06b5af8: init_ramfs_fs+0x0/0xf() returned 0.
initcall 0xc06b5af8 ran for 0 msecs: init_ramfs_fs+0x0/0xf()
Calling initcall 0xc06b5b3a: init_hugetlbfs_fs+0x0/0x84()
initcall 0xc06b5b3a: init_hugetlbfs_fs+0x0/0x84() returned 0.
initcall 0xc06b5b3a ran for 0 msecs: init_hugetlbfs_fs+0x0/0x84()
Calling initcall 0xc06b5bbe: init_iso9660_fs+0x0/0x61()
initcall 0xc06b5bbe: init_iso9660_fs+0x0/0x61() returned 0.
initcall 0xc06b5bbe ran for 0 msecs: init_iso9660_fs+0x0/0x61()
Calling initcall 0xc06b5c3b: init_nls_cp437+0x0/0xf()
initcall 0xc06b5c3b: init_nls_cp437+0x0/0xf() returned 0.
initcall 0xc06b5c3b ran for 0 msecs: init_nls_cp437+0x0/0xf()
Calling initcall 0xc06b5c4a: init_nls_ascii+0x0/0xf()
initcall 0xc06b5c4a: init_nls_ascii+0x0/0xf() returned 0.
initcall 0xc06b5c4a ran for 0 msecs: init_nls_ascii+0x0/0xf()
Calling initcall 0xc06b5c9a: ipc_init+0x0/0x16()
initcall 0xc06b5c9a: ipc_init+0x0/0x16() returned 0.
initcall 0xc06b5c9a ran for 0 msecs: ipc_init+0x0/0x16()
Calling initcall 0xc06b5d8a: ipc_sysctl_init+0x0/0x11()
initcall 0xc06b5d8a: ipc_sysctl_init+0x0/0x11() returned 0.
initcall 0xc06b5d8a ran for 0 msecs: ipc_sysctl_init+0x0/0x11()
Calling initcall 0xc06b5d9b: init_mqueue_fs+0x0/0xb6()
initcall 0xc06b5d9b: init_mqueue_fs+0x0/0xb6() returned 0.
initcall 0xc06b5d9b ran for 0 msecs: init_mqueue_fs+0x0/0xb6()
Calling initcall 0xc06b5f74: key_proc_init+0x0/0x4a()
initcall 0xc06b5f74: key_proc_init+0x0/0x4a() returned 0.
initcall 0xc06b5f74 ran for 0 msecs: key_proc_init+0x0/0x4a()
Calling initcall 0xc06b60fb: selinux_nf_ip_init+0x0/0x68()
initcall 0xc06b60fb: selinux_nf_ip_init+0x0/0x68() returned 0.
initcall 0xc06b60fb ran for 0 msecs: selinux_nf_ip_init+0x0/0x68()
Calling initcall 0xc06b629b: init_sel_fs+0x0/0x5a()
initcall 0xc06b629b: init_sel_fs+0x0/0x5a() returned 0.
initcall 0xc06b629b ran for 0 msecs: init_sel_fs+0x0/0x5a()
Calling initcall 0xc06b62f5: selnl_init+0x0/0x46()
initcall 0xc06b62f5: selnl_init+0x0/0x46() returned 0.
initcall 0xc06b62f5 ran for 0 msecs: selnl_init+0x0/0x46()
Calling initcall 0xc06b633b: sel_netif_init+0x0/0x57()
initcall 0xc06b633b: sel_netif_init+0x0/0x57() returned 0.
initcall 0xc06b633b ran for 0 msecs: sel_netif_init+0x0/0x57()
Calling initcall 0xc06b6392: sel_netnode_init+0x0/0x4d()
initcall 0xc06b6392: sel_netnode_init+0x0/0x4d() returned 0.
initcall 0xc06b6392 ran for 0 msecs: sel_netnode_init+0x0/0x4d()
Calling initcall 0xc06b63df: aurule_init+0x0/0x30()
initcall 0xc06b63df: aurule_init+0x0/0x30() returned 0.
initcall 0xc06b63df ran for 0 msecs: aurule_init+0x0/0x30()
Calling initcall 0xc06b648b: crypto_algapi_init+0x0/0xc()
initcall 0xc06b648b: crypto_algapi_init+0x0/0xc() returned 0.
initcall 0xc06b648b ran for 0 msecs: crypto_algapi_init+0x0/0xc()
Calling initcall 0xc06b64b5: blkcipher_module_init+0x0/0x24()
initcall 0xc06b64b5: blkcipher_module_init+0x0/0x24() returned 0.
initcall 0xc06b64b5 ran for 0 msecs: blkcipher_module_init+0x0/0x24()
Calling initcall 0xc06b64f7: cryptomgr_init+0x0/0xf()
initcall 0xc06b64f7: cryptomgr_init+0x0/0xf() returned 0.
initcall 0xc06b64f7 ran for 0 msecs: cryptomgr_init+0x0/0xf()
Calling initcall 0xc06b6506: hmac_module_init+0x0/0xf()
initcall 0xc06b6506: hmac_module_init+0x0/0xf() returned 0.
initcall 0xc06b6506 ran for 0 msecs: hmac_module_init+0x0/0xf()
Calling initcall 0xc06b6515: crypto_xcbc_module_init+0x0/0xf()
initcall 0xc06b6515: crypto_xcbc_module_init+0x0/0xf() returned 0.
initcall 0xc06b6515 ran for 0 msecs: crypto_xcbc_module_init+0x0/0xf()
Calling initcall 0xc06b6524: init+0x0/0x67()
initcall 0xc06b6524: init+0x0/0x67() returned 0.
initcall 0xc06b6524 ran for 0 msecs: init+0x0/0x67()
Calling initcall 0xc06b658b: init+0x0/0xf()
initcall 0xc06b658b: init+0x0/0xf() returned 0.
initcall 0xc06b658b ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b659a: init+0x0/0xf()
initcall 0xc06b659a: init+0x0/0xf() returned 0.
initcall 0xc06b659a ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b65a9: init+0x0/0xf()
initcall 0xc06b65a9: init+0x0/0xf() returned 0.
initcall 0xc06b65a9 ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b65b8: init+0x0/0x33()
initcall 0xc06b65b8: init+0x0/0x33() returned 0.
initcall 0xc06b65b8 ran for 0 msecs: init+0x0/0x33()
Calling initcall 0xc06b65eb: init+0x0/0x33()
initcall 0xc06b65eb: init+0x0/0x33() returned 0.
initcall 0xc06b65eb ran for 0 msecs: init+0x0/0x33()
Calling initcall 0xc06b661e: init+0x0/0x52()
initcall 0xc06b661e: init+0x0/0x52() returned 0.
initcall 0xc06b661e ran for 0 msecs: init+0x0/0x52()
Calling initcall 0xc06b6670: init+0x0/0x52()
initcall 0xc06b6670: init+0x0/0x52() returned 0.
initcall 0xc06b6670 ran for 0 msecs: init+0x0/0x52()
Calling initcall 0xc06b66c2: crypto_ecb_module_init+0x0/0xf()
initcall 0xc06b66c2: crypto_ecb_module_init+0x0/0xf() returned 0.
initcall 0xc06b66c2 ran for 0 msecs: crypto_ecb_module_init+0x0/0xf()
Calling initcall 0xc06b66d1: crypto_cbc_module_init+0x0/0xf()
initcall 0xc06b66d1: crypto_cbc_module_init+0x0/0xf() returned 0.
initcall 0xc06b66d1 ran for 0 msecs: crypto_cbc_module_init+0x0/0xf()
Calling initcall 0xc06b66e0: crypto_module_init+0x0/0xf()
initcall 0xc06b66e0: crypto_module_init+0x0/0xf() returned 0.
initcall 0xc06b66e0 ran for 0 msecs: crypto_module_init+0x0/0xf()
Calling initcall 0xc06b66ef: init+0x0/0x33()
initcall 0xc06b66ef: init+0x0/0x33() returned 0.
initcall 0xc06b66ef ran for 0 msecs: init+0x0/0x33()
Calling initcall 0xc06b6722: init+0x0/0xf()
initcall 0xc06b6722: init+0x0/0xf() returned 0.
initcall 0xc06b6722 ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6731: init+0x0/0xf()
initcall 0xc06b6731: init+0x0/0xf() returned 0.
initcall 0xc06b6731 ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6740: init+0x0/0x33()
initcall 0xc06b6740: init+0x0/0x33() returned 0.
initcall 0xc06b6740 ran for 0 msecs: init+0x0/0x33()
Calling initcall 0xc06b6773: aes_init+0x0/0x2ac()
initcall 0xc06b6773: aes_init+0x0/0x2ac() returned 0.
initcall 0xc06b6773 ran for 0 msecs: aes_init+0x0/0x2ac()
Calling initcall 0xc06b6a1f: init+0x0/0xf()
initcall 0xc06b6a1f: init+0x0/0xf() returned 0.
initcall 0xc06b6a1f ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6a2e: init+0x0/0xf()
initcall 0xc06b6a2e: init+0x0/0xf() returned 0.
initcall 0xc06b6a2e ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6a3d: arc4_init+0x0/0xf()
initcall 0xc06b6a3d: arc4_init+0x0/0xf() returned 0.
initcall 0xc06b6a3d ran for 0 msecs: arc4_init+0x0/0xf()
Calling initcall 0xc06b6a4c: init+0x0/0x52()
initcall 0xc06b6a4c: init+0x0/0x52() returned 0.
initcall 0xc06b6a4c ran for 0 msecs: init+0x0/0x52()
Calling initcall 0xc06b6a9e: init+0x0/0xf()
initcall 0xc06b6a9e: init+0x0/0xf() returned 0.
initcall 0xc06b6a9e ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6aad: init+0x0/0xf()
initcall 0xc06b6aad: init+0x0/0xf() returned 0.
initcall 0xc06b6aad ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6abc: init+0x0/0xf()
initcall 0xc06b6abc: init+0x0/0xf() returned 0.
initcall 0xc06b6abc ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6acb: michael_mic_init+0x0/0xf()
initcall 0xc06b6acb: michael_mic_init+0x0/0xf() returned 0.
initcall 0xc06b6acb ran for 0 msecs: michael_mic_init+0x0/0xf()
Calling initcall 0xc06b6ada: init+0x0/0xf()
initcall 0xc06b6ada: init+0x0/0xf() returned 0.
initcall 0xc06b6ada ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc06b6dc8: noop_init+0x0/0x11()
io scheduler noop registered
initcall 0xc06b6dc8: noop_init+0x0/0x11() returned 0.
initcall 0xc06b6dc8 ran for 2 msecs: noop_init+0x0/0x11()
Calling initcall 0xc06b6dd9: as_init+0x0/0x11()
io scheduler anticipatory registered
initcall 0xc06b6dd9: as_init+0x0/0x11() returned 0.
initcall 0xc06b6dd9 ran for 3 msecs: as_init+0x0/0x11()
Calling initcall 0xc06b6dea: deadline_init+0x0/0x11()
io scheduler deadline registered
initcall 0xc06b6dea: deadline_init+0x0/0x11() returned 0.
initcall 0xc06b6dea ran for 2 msecs: deadline_init+0x0/0x11()
Calling initcall 0xc06b6dfb: cfq_init+0x0/0x94()
io scheduler cfq registered (default)
initcall 0xc06b6dfb: cfq_init+0x0/0x94() returned 0.
initcall 0xc06b6dfb ran for 3 msecs: cfq_init+0x0/0x94()
Calling initcall 0xc06b700d: percpu_counter_startup+0x0/0x11()
initcall 0xc06b700d: percpu_counter_startup+0x0/0x11() returned 0.
initcall 0xc06b700d ran for 0 msecs: percpu_counter_startup+0x0/0x11()
Calling initcall 0xc06b701e: audit_classes_init+0x0/0x4f()
initcall 0xc06b701e: audit_classes_init+0x0/0x4f() returned 0.
initcall 0xc06b701e ran for 0 msecs: audit_classes_init+0x0/0x4f()
Calling initcall 0xc0472220: pci_init+0x0/0x2c()
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:01:00.0: Boot video device
initcall 0xc0472220: pci_init+0x0/0x2c() returned 0.
initcall 0xc0472220 ran for 31 msecs: pci_init+0x0/0x2c()
Calling initcall 0xc06b7685: pci_proc_init+0x0/0x5f()
initcall 0xc06b7685: pci_proc_init+0x0/0x5f() returned 0.
initcall 0xc06b7685 ran for 0 msecs: pci_proc_init+0x0/0x5f()
Calling initcall 0xc06b76e4: pcie_portdrv_init+0x0/0x41()
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
initcall 0xc06b76e4: pcie_portdrv_init+0x0/0x41() returned 0.
initcall 0xc06b76e4 ran for 62 msecs: pcie_portdrv_init+0x0/0x41()
Calling initcall 0xc06b7725: aer_service_init+0x0/0x1d()
initcall 0xc06b7725: aer_service_init+0x0/0x1d() returned 0.
initcall 0xc06b7725 ran for 0 msecs: aer_service_init+0x0/0x1d()
Calling initcall 0xc06b7742: pci_hotplug_init+0x0/0x50()
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall 0xc06b7742: pci_hotplug_init+0x0/0x50() returned 0.
initcall 0xc06b7742 ran for 4 msecs: pci_hotplug_init+0x0/0x50()
Calling initcall 0xc06b7dae: acpi_reserve_resources+0x0/0xc8()
initcall 0xc06b7dae: acpi_reserve_resources+0x0/0xc8() returned 0.
initcall 0xc06b7dae ran for 0 msecs: acpi_reserve_resources+0x0/0xc8()
Calling initcall 0xc06b8bf2: acpi_fan_init+0x0/0x51()
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN] (on)
initcall 0xc06b8bf2: acpi_fan_init+0x0/0x51() returned 0.
initcall 0xc06b8bf2 ran for 6 msecs: acpi_fan_init+0x0/0x51()
Calling initcall 0xc06b8d58: irqrouter_init_sysfs+0x0/0x33()
initcall 0xc06b8d58: irqrouter_init_sysfs+0x0/0x33() returned 0.
initcall 0xc06b8d58 ran for 0 msecs: irqrouter_init_sysfs+0x0/0x33()
Calling initcall 0xc06b8eb6: acpi_processor_init+0x0/0xd4()
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: ACPI0007:01 is registered as cooling_device2
initcall 0xc06b8eb6: acpi_processor_init+0x0/0xd4() returned 0.
initcall 0xc06b8eb6 ran for 8 msecs: acpi_processor_init+0x0/0xd4()
Calling initcall 0xc06b8f8a: acpi_container_init+0x0/0x3d()
initcall 0xc06b8f8a: acpi_container_init+0x0/0x3d() returned 0.
initcall 0xc06b8f8a ran for 4 msecs: acpi_container_init+0x0/0x3d()
Calling initcall 0xc06b8fc7: acpi_thermal_init+0x0/0x76()
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
initcall 0xc06b8fc7: acpi_thermal_init+0x0/0x76() returned 0.
initcall 0xc06b8fc7 ran for 7 msecs: acpi_thermal_init+0x0/0x76()
Calling initcall 0xc06ba736: isapnp_init+0x0/0x3f7()
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
initcall 0xc06ba736: isapnp_init+0x0/0x3f7() returned 0.
initcall 0xc06ba736 ran for 344 msecs: isapnp_init+0x0/0x3f7()
Calling initcall 0xc06bacd6: rand_initialize+0x0/0x25()
initcall 0xc06bacd6: rand_initialize+0x0/0x25() returned 0.
initcall 0xc06bacd6 ran for 0 msecs: rand_initialize+0x0/0x25()
Calling initcall 0xc06bad2c: tty_init+0x0/0x18f()
initcall 0xc06bad2c: tty_init+0x0/0x18f() returned 0.
initcall 0xc06bad2c ran for 5 msecs: tty_init+0x0/0x18f()
Calling initcall 0xc06baee2: pty_init+0x0/0x1ff()
initcall 0xc06baee2: pty_init+0x0/0x1ff() returned 0.
initcall 0xc06baee2 ran for 0 msecs: pty_init+0x0/0x1ff()
Calling initcall 0xc06bb5fb: raw_init+0x0/0xb9()
initcall 0xc06bb5fb: raw_init+0x0/0xb9() returned 0.
initcall 0xc06bb5fb ran for 0 msecs: raw_init+0x0/0xb9()
Calling initcall 0xc06bb6ef: rtc_init+0x0/0x187()
Real Time Clock Driver v1.12ac
initcall 0xc06bb6ef: rtc_init+0x0/0x187() returned 0.
initcall 0xc06bb6ef ran for 2 msecs: rtc_init+0x0/0x187()
Calling initcall 0xc06bb876: hpet_init+0x0/0x59()
initcall 0xc06bb876: hpet_init+0x0/0x59() returned 0.
initcall 0xc06bb876 ran for 0 msecs: hpet_init+0x0/0x59()
Calling initcall 0xc06bb8cf: nvram_init+0x0/0x77()
Non-volatile memory driver v1.2
initcall 0xc06bb8cf: nvram_init+0x0/0x77() returned 0.
initcall 0xc06bb8cf ran for 2 msecs: nvram_init+0x0/0x77()
Calling initcall 0xc06bb990: agp_init+0x0/0x21()
Linux agpgart interface v0.103
initcall 0xc06bb990: agp_init+0x0/0x21() returned 0.
initcall 0xc06bb990 ran for 2 msecs: agp_init+0x0/0x21()
Calling initcall 0xc06bb9b1: agp_ali_init+0x0/0x24()
initcall 0xc06bb9b1: agp_ali_init+0x0/0x24() returned 0.
initcall 0xc06bb9b1 ran for 0 msecs: agp_ali_init+0x0/0x24()
Calling initcall 0xc06bb9d5: agp_ati_init+0x0/0x24()
initcall 0xc06bb9d5: agp_ati_init+0x0/0x24() returned 0.
initcall 0xc06bb9d5 ran for 0 msecs: agp_ati_init+0x0/0x24()
Calling initcall 0xc06bb9f9: agp_amdk7_init+0x0/0x24()
initcall 0xc06bb9f9: agp_amdk7_init+0x0/0x24() returned 0.
initcall 0xc06bb9f9 ran for 0 msecs: agp_amdk7_init+0x0/0x24()
Calling initcall 0xc06bba1d: agp_amd64_init+0x0/0xb1()
initcall 0xc06bba1d: agp_amd64_init+0x0/0xb1() returned 0.
initcall 0xc06bba1d ran for 0 msecs: agp_amd64_init+0x0/0xb1()
Calling initcall 0xc06bbace: agp_efficeon_init+0x0/0x39()
initcall 0xc06bbace: agp_efficeon_init+0x0/0x39() returned 0.
initcall 0xc06bbace ran for 0 msecs: agp_efficeon_init+0x0/0x39()
Calling initcall 0xc06bbb07: agp_intel_init+0x0/0x24()
initcall 0xc06bbb07: agp_intel_init+0x0/0x24() returned 0.
initcall 0xc06bbb07 ran for 0 msecs: agp_intel_init+0x0/0x24()
Calling initcall 0xc06bbb2b: agp_nvidia_init+0x0/0x24()
initcall 0xc06bbb2b: agp_nvidia_init+0x0/0x24() returned 0.
initcall 0xc06bbb2b ran for 0 msecs: agp_nvidia_init+0x0/0x24()
Calling initcall 0xc06bbb4f: agp_sis_init+0x0/0x24()
initcall 0xc06bbb4f: agp_sis_init+0x0/0x24() returned 0.
initcall 0xc06bbb4f ran for 0 msecs: agp_sis_init+0x0/0x24()
Calling initcall 0xc06bbb73: agp_serverworks_init+0x0/0x24()
initcall 0xc06bbb73: agp_serverworks_init+0x0/0x24() returned 0.
initcall 0xc06bbb73 ran for 0 msecs: agp_serverworks_init+0x0/0x24()
Calling initcall 0xc06bbb97: agp_via_init+0x0/0x24()
initcall 0xc06bbb97: agp_via_init+0x0/0x24() returned 0.
initcall 0xc06bbb97 ran for 0 msecs: agp_via_init+0x0/0x24()
Calling initcall 0xc06bbbbb: drm_core_init+0x0/0x110()
[drm] Initialized drm 1.1.0 20060810
initcall 0xc06bbbbb: drm_core_init+0x0/0x110() returned 0.
initcall 0xc06bbbbb ran for 3 msecs: drm_core_init+0x0/0x110()
Calling initcall 0xc06bbccb: i810_init+0x0/0x19()
initcall 0xc06bbccb: i810_init+0x0/0x19() returned 0.
initcall 0xc06bbccb ran for 0 msecs: i810_init+0x0/0x19()
Calling initcall 0xc06bbce4: i915_init+0x0/0x19()
initcall 0xc06bbce4: i915_init+0x0/0x19() returned 0.
initcall 0xc06bbce4 ran for 0 msecs: i915_init+0x0/0x19()
Calling initcall 0xc06bbcfd: cn_proc_init+0x0/0x30()
initcall 0xc06bbcfd: cn_proc_init+0x0/0x30() returned 0.
initcall 0xc06bbcfd ran for 0 msecs: cn_proc_init+0x0/0x30()
Calling initcall 0xc06bbf9e: serial8250_init+0x0/0x10f()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall 0xc06bbf9e: serial8250_init+0x0/0x10f() returned 0.
initcall 0xc06bbf9e ran for 243 msecs: serial8250_init+0x0/0x10f()
Calling initcall 0xc06bc0ad: serial8250_pnp_init+0x0/0xf()
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall 0xc06bc0ad: serial8250_pnp_init+0x0/0xf() returned 0.
initcall 0xc06bc0ad ran for 4 msecs: serial8250_pnp_init+0x0/0xf()
Calling initcall 0xc06bc0bc: serial8250_pci_init+0x0/0x16()
initcall 0xc06bc0bc: serial8250_pci_init+0x0/0x16() returned 0.
initcall 0xc06bc0bc ran for 0 msecs: serial8250_pci_init+0x0/0x16()
Calling initcall 0xc06bc611: isa_bus_init+0x0/0x33()
initcall 0xc06bc611: isa_bus_init+0x0/0x33() returned 0.
initcall 0xc06bc611 ran for 0 msecs: isa_bus_init+0x0/0x33()
Calling initcall 0xc048f170: topology_sysfs_init+0x0/0x3d()
initcall 0xc048f170: topology_sysfs_init+0x0/0x3d() returned 0.
initcall 0xc048f170 ran for 0 msecs: topology_sysfs_init+0x0/0x3d()
Calling initcall 0xc06bc6c2: brd_init+0x0/0x106()
brd: module loaded
initcall 0xc06bc6c2: brd_init+0x0/0x106() returned 0.
initcall 0xc06bc6c2 ran for 3 msecs: brd_init+0x0/0x106()
Calling initcall 0xc06bc7c8: loop_init+0x0/0x125()
loop: module loaded
initcall 0xc06bc7c8: loop_init+0x0/0x125() returned 0.
initcall 0xc06bc7c8 ran for 2 msecs: loop_init+0x0/0x125()
Calling initcall 0xc06bcda4: cpqarray_init+0x0/0x22c()
Compaq SMART2 Driver (v 2.6.0)
initcall 0xc06bcda4: cpqarray_init+0x0/0x22c() returned 0.
initcall 0xc06bcda4 ran for 2 msecs: cpqarray_init+0x0/0x22c()
Calling initcall 0xc06bd29a: e1000_init_module+0x0/0x6e()
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
initcall 0xc06bd29a: e1000_init_module+0x0/0x6e() returned 0.
initcall 0xc06bd29a ran for 8 msecs: e1000_init_module+0x0/0x6e()
Calling initcall 0xc06bd308: e100_init_module+0x0/0x4d()
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall 0xc06bd308: e100_init_module+0x0/0x4d() returned 0.
initcall 0xc06bd308 ran for 8 msecs: e100_init_module+0x0/0x4d()
Calling initcall 0xc06bd355: tg3_init+0x0/0x16()
initcall 0xc06bd355: tg3_init+0x0/0x16() returned 0.
initcall 0xc06bd355 ran for 0 msecs: tg3_init+0x0/0x16()
Calling initcall 0xc06bd36b: skge_init_module+0x0/0x16()
initcall 0xc06bd36b: skge_init_module+0x0/0x16() returned 0.
initcall 0xc06bd36b ran for 0 msecs: skge_init_module+0x0/0x16()
Calling initcall 0xc06bd3c4: net_olddevs_init+0x0/0x81()
initcall 0xc06bd3c4: net_olddevs_init+0x0/0x81() returned 0.
initcall 0xc06bd3c4 ran for 0 msecs: net_olddevs_init+0x0/0x81()
Calling initcall 0xc06bd4b7: init_nic+0x0/0x16()
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
initcall 0xc06bd4b7: init_nic+0x0/0x16() returned 0.
initcall 0xc06bd4b7 ran for 522 msecs: init_nic+0x0/0x16()
Calling initcall 0xc06bd4cd: cp_init+0x0/0x16()
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:05:07.0: Try the "8139too" driver instead.
initcall 0xc06bd4cd: cp_init+0x0/0x16() returned 0.
initcall 0xc06bd4cd ran for 16 msecs: cp_init+0x0/0x16()
Calling initcall 0xc06bd4e3: rtl8139_init_module+0x0/0x16()
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 17
eth1:  Identified 8139 chip type 'RTL-8139B'
initcall 0xc06bd4e3: rtl8139_init_module+0x0/0x16() returned 0.
initcall 0xc06bd4e3 ran for 23 msecs: rtl8139_init_module+0x0/0x16()
Calling initcall 0xc06bd514: init_netconsole+0x0/0x15f()
console [netcon0] enabled
netconsole: network logging started
initcall 0xc06bd514: init_netconsole+0x0/0x15f() returned 0.
initcall 0xc06bd514 ran for 5898 msecs: init_netconsole+0x0/0x15f()
Calling initcall 0xc06bd908: spi_transport_init+0x0/0x27()
initcall 0xc06bd908: spi_transport_init+0x0/0x27() returned 0.
initcall 0xc06bd908 ran for 0 msecs: spi_transport_init+0x0/0x27()
Calling initcall 0xc06bd92f: sas_transport_init+0x0/0x9f()
initcall 0xc06bd92f: sas_transport_init+0x0/0x9f() returned 0.
initcall 0xc06bd92f ran for 0 msecs: sas_transport_init+0x0/0x9f()
Calling initcall 0xc06bd9ce: sas_class_init+0x0/0x2c()
initcall 0xc06bd9ce: sas_class_init+0x0/0x2c() returned 0.
initcall 0xc06bd9ce ran for 0 msecs: sas_class_init+0x0/0x2c()
Calling initcall 0xc06bd9fa: ahc_linux_init+0x0/0x5c()
initcall 0xc06bd9fa: ahc_linux_init+0x0/0x5c() returned 0.
initcall 0xc06bd9fa ran for 0 msecs: ahc_linux_init+0x0/0x5c()
Calling initcall 0xc06bda56: ahd_linux_init+0x0/0x6e()
initcall 0xc06bda56: ahd_linux_init+0x0/0x6e() returned 0.
initcall 0xc06bda56 ran for 0 msecs: ahd_linux_init+0x0/0x6e()
Calling initcall 0xc06bdac4: aic94xx_init+0x0/0x117()
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
initcall 0xc06bdac4: aic94xx_init+0x0/0x117() returned 0.
initcall 0xc06bdac4 ran for 5 msecs: aic94xx_init+0x0/0x117()
Calling initcall 0xc06bdbdb: init_sd+0x0/0xcf()
Driver 'sd' needs updating - please use bus_type methods
initcall 0xc06bdbdb: init_sd+0x0/0xcf() returned 0.
initcall 0xc06bdbdb ran for 4 msecs: init_sd+0x0/0xcf()
Calling initcall 0xc06bdcaa: init_sr+0x0/0x3d()
Driver 'sr' needs updating - please use bus_type methods
initcall 0xc06bdcaa: init_sr+0x0/0x3d() returned 0.
initcall 0xc06bdcaa ran for 4 msecs: init_sr+0x0/0x3d()
Calling initcall 0xc06bdce7: init_sg+0x0/0x13f()
initcall 0xc06bdce7: init_sg+0x0/0x13f() returned 0.
initcall 0xc06bdce7 ran for 0 msecs: init_sg+0x0/0x13f()
Calling initcall 0xc06bde26: init_ch_module+0x0/0x87()
SCSI Media Changer driver v0.25 
Driver 'ch' needs updating - please use bus_type methods
initcall 0xc06bde26: init_ch_module+0x0/0x87() returned 0.
initcall 0xc06bde26 ran for 7 msecs: init_ch_module+0x0/0x87()
Calling initcall 0xc06be160: ahci_init+0x0/0x16()
initcall 0xc06be160: ahci_init+0x0/0x16() returned 0.
initcall 0xc06be160 ran for 0 msecs: ahci_init+0x0/0x16()
Calling initcall 0xc06be176: k2_sata_init+0x0/0x16()
initcall 0xc06be176: k2_sata_init+0x0/0x16() returned 0.
initcall 0xc06be176 ran for 0 msecs: k2_sata_init+0x0/0x16()
Calling initcall 0xc06be18c: piix_init+0x0/0x27()
initcall 0xc06be18c: piix_init+0x0/0x27() returned 0.
initcall 0xc06be18c ran for 0 msecs: piix_init+0x0/0x27()
Calling initcall 0xc06be1b3: pdc_ata_init+0x0/0x16()
initcall 0xc06be1b3: pdc_ata_init+0x0/0x16() returned 0.
initcall 0xc06be1b3 ran for 0 msecs: pdc_ata_init+0x0/0x16()
Calling initcall 0xc06be1c9: qs_ata_init+0x0/0x16()
initcall 0xc06be1c9: qs_ata_init+0x0/0x16() returned 0.
initcall 0xc06be1c9 ran for 0 msecs: qs_ata_init+0x0/0x16()
Calling initcall 0xc06be1df: sil_init+0x0/0x16()
initcall 0xc06be1df: sil_init+0x0/0x16() returned 0.
initcall 0xc06be1df ran for 0 msecs: sil_init+0x0/0x16()
Calling initcall 0xc06be1f5: sil24_init+0x0/0x16()
initcall 0xc06be1f5: sil24_init+0x0/0x16() returned 0.
initcall 0xc06be1f5 ran for 0 msecs: sil24_init+0x0/0x16()
Calling initcall 0xc06be20b: svia_init+0x0/0x16()
initcall 0xc06be20b: svia_init+0x0/0x16() returned 0.
initcall 0xc06be20b ran for 0 msecs: svia_init+0x0/0x16()
Calling initcall 0xc06be221: vsc_sata_init+0x0/0x16()
initcall 0xc06be221: vsc_sata_init+0x0/0x16() returned 0.
initcall 0xc06be221 ran for 0 msecs: vsc_sata_init+0x0/0x16()
Calling initcall 0xc06be237: sis_init+0x0/0x16()
initcall 0xc06be237: sis_init+0x0/0x16() returned 0.
initcall 0xc06be237 ran for 0 msecs: sis_init+0x0/0x16()
Calling initcall 0xc06be24d: pdc_sata_init+0x0/0x16()
initcall 0xc06be24d: pdc_sata_init+0x0/0x16() returned 0.
initcall 0xc06be24d ran for 0 msecs: pdc_sata_init+0x0/0x16()
Calling initcall 0xc06be263: nv_init+0x0/0x16()
initcall 0xc06be263: nv_init+0x0/0x16() returned 0.
initcall 0xc06be263 ran for 0 msecs: nv_init+0x0/0x16()
Calling initcall 0xc06be279: uli_init+0x0/0x16()
initcall 0xc06be279: uli_init+0x0/0x16() returned 0.
initcall 0xc06be279 ran for 0 msecs: uli_init+0x0/0x16()
Calling initcall 0xc06be28f: mv_init+0x0/0x3a()
initcall 0xc06be28f: mv_init+0x0/0x3a() returned 0.
initcall 0xc06be28f ran for 0 msecs: mv_init+0x0/0x3a()
Calling initcall 0xc06be2c9: adma_ata_init+0x0/0x16()
initcall 0xc06be2c9: adma_ata_init+0x0/0x16() returned 0.
initcall 0xc06be2c9 ran for 0 msecs: adma_ata_init+0x0/0x16()
Calling initcall 0xc06be2df: ali_init+0x0/0x16()
initcall 0xc06be2df: ali_init+0x0/0x16() returned 0.
initcall 0xc06be2df ran for 0 msecs: ali_init+0x0/0x16()
Calling initcall 0xc06be2f5: amd_init+0x0/0x16()
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48 
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x3f01f (20:600:0x13)
ata1.00: configured for UDMA/100
ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x701f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x701f (600:60:0x1c)
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
initcall 0xc06be2f5: amd_init+0x0/0x16() returned 0.
initcall 0xc06be2f5 ran for 845 msecs: amd_init+0x0/0x16()
Calling initcall 0xc06be30b: artop_init+0x0/0x16()
initcall 0xc06be30b: artop_init+0x0/0x16() returned 0.
initcall 0xc06be30b ran for 0 msecs: artop_init+0x0/0x16()
Calling initcall 0xc06be321: atiixp_init+0x0/0x16()
initcall 0xc06be321: atiixp_init+0x0/0x16() returned 0.
initcall 0xc06be321 ran for 0 msecs: atiixp_init+0x0/0x16()
Calling initcall 0xc06be337: cmd64x_init+0x0/0x16()
initcall 0xc06be337: cmd64x_init+0x0/0x16() returned 0.
initcall 0xc06be337 ran for 0 msecs: cmd64x_init+0x0/0x16()
Calling initcall 0xc06be34d: cs5520_init+0x0/0x16()
initcall 0xc06be34d: cs5520_init+0x0/0x16() returned 0.
initcall 0xc06be34d ran for 0 msecs: cs5520_init+0x0/0x16()
Calling initcall 0xc06be363: cs5530_init+0x0/0x16()
initcall 0xc06be363: cs5530_init+0x0/0x16() returned 0.
initcall 0xc06be363 ran for 0 msecs: cs5530_init+0x0/0x16()
Calling initcall 0xc06be379: cs5535_init+0x0/0x16()
initcall 0xc06be379: cs5535_init+0x0/0x16() returned 0.
initcall 0xc06be379 ran for 0 msecs: cs5535_init+0x0/0x16()
Calling initcall 0xc06be38f: cy82c693_init+0x0/0x16()
initcall 0xc06be38f: cy82c693_init+0x0/0x16() returned 0.
initcall 0xc06be38f ran for 0 msecs: cy82c693_init+0x0/0x16()
Calling initcall 0xc06be3a5: efar_init+0x0/0x16()
initcall 0xc06be3a5: efar_init+0x0/0x16() returned 0.
initcall 0xc06be3a5 ran for 0 msecs: efar_init+0x0/0x16()
Calling initcall 0xc06be3bb: hpt36x_init+0x0/0x16()
initcall 0xc06be3bb: hpt36x_init+0x0/0x16() returned 0.
initcall 0xc06be3bb ran for 0 msecs: hpt36x_init+0x0/0x16()
Calling initcall 0xc06be3d1: hpt37x_init+0x0/0x16()
initcall 0xc06be3d1: hpt37x_init+0x0/0x16() returned 0.
initcall 0xc06be3d1 ran for 0 msecs: hpt37x_init+0x0/0x16()
Calling initcall 0xc06be3e7: hpt3x2n_init+0x0/0x16()
initcall 0xc06be3e7: hpt3x2n_init+0x0/0x16() returned 0.
initcall 0xc06be3e7 ran for 0 msecs: hpt3x2n_init+0x0/0x16()
Calling initcall 0xc06be3fd: hpt3x3_init+0x0/0x16()
initcall 0xc06be3fd: hpt3x3_init+0x0/0x16() returned 0.
initcall 0xc06be3fd ran for 0 msecs: hpt3x3_init+0x0/0x16()
Calling initcall 0xc06be413: it821x_init+0x0/0x16()
initcall 0xc06be413: it821x_init+0x0/0x16() returned 0.
initcall 0xc06be413 ran for 0 msecs: it821x_init+0x0/0x16()
Calling initcall 0xc06be429: jmicron_init+0x0/0x16()
initcall 0xc06be429: jmicron_init+0x0/0x16() returned 0.
initcall 0xc06be429 ran for 0 msecs: jmicron_init+0x0/0x16()
Calling initcall 0xc06be43f: netcell_init+0x0/0x16()
initcall 0xc06be43f: netcell_init+0x0/0x16() returned 0.
initcall 0xc06be43f ran for 0 msecs: netcell_init+0x0/0x16()
Calling initcall 0xc06be455: ns87410_init+0x0/0x16()
initcall 0xc06be455: ns87410_init+0x0/0x16() returned 0.
initcall 0xc06be455 ran for 0 msecs: ns87410_init+0x0/0x16()
Calling initcall 0xc06be46b: opti_init+0x0/0x16()
initcall 0xc06be46b: opti_init+0x0/0x16() returned 0.
initcall 0xc06be46b ran for 0 msecs: opti_init+0x0/0x16()
Calling initcall 0xc06be481: optidma_init+0x0/0x16()
initcall 0xc06be481: optidma_init+0x0/0x16() returned 0.
initcall 0xc06be481 ran for 0 msecs: optidma_init+0x0/0x16()
Calling initcall 0xc06be497: marvell_init+0x0/0x16()
initcall 0xc06be497: marvell_init+0x0/0x16() returned 0.
initcall 0xc06be497 ran for 0 msecs: marvell_init+0x0/0x16()
Calling initcall 0xc06be4ad: mpiix_init+0x0/0x16()
initcall 0xc06be4ad: mpiix_init+0x0/0x16() returned 0.
initcall 0xc06be4ad ran for 0 msecs: mpiix_init+0x0/0x16()
Calling initcall 0xc06be4c3: oldpiix_init+0x0/0x16()
initcall 0xc06be4c3: oldpiix_init+0x0/0x16() returned 0.
initcall 0xc06be4c3 ran for 0 msecs: oldpiix_init+0x0/0x16()
Calling initcall 0xc06be4d9: pdc2027x_init+0x0/0x16()
initcall 0xc06be4d9: pdc2027x_init+0x0/0x16() returned 0.
initcall 0xc06be4d9 ran for 0 msecs: pdc2027x_init+0x0/0x16()
Calling initcall 0xc06be4ef: pdc202xx_init+0x0/0x16()
initcall 0xc06be4ef: pdc202xx_init+0x0/0x16() returned 0.
initcall 0xc06be4ef ran for 0 msecs: pdc202xx_init+0x0/0x16()
Calling initcall 0xc06be681: qdi_init+0x0/0x1ca()
initcall 0xc06be681: qdi_init+0x0/0x1ca() returned -19.
initcall 0xc06be681 ran for 0 msecs: qdi_init+0x0/0x1ca()
Calling initcall 0xc06be84b: radisys_init+0x0/0x16()
initcall 0xc06be84b: radisys_init+0x0/0x16() returned 0.
initcall 0xc06be84b ran for 0 msecs: radisys_init+0x0/0x16()
Calling initcall 0xc06be861: rz1000_init+0x0/0x16()
initcall 0xc06be861: rz1000_init+0x0/0x16() returned 0.
initcall 0xc06be861 ran for 0 msecs: rz1000_init+0x0/0x16()
Calling initcall 0xc06be877: sc1200_init+0x0/0x16()
initcall 0xc06be877: sc1200_init+0x0/0x16() returned 0.
initcall 0xc06be877 ran for 0 msecs: sc1200_init+0x0/0x16()
Calling initcall 0xc06be88d: serverworks_init+0x0/0x16()
initcall 0xc06be88d: serverworks_init+0x0/0x16() returned 0.
initcall 0xc06be88d ran for 0 msecs: serverworks_init+0x0/0x16()
Calling initcall 0xc06be8a3: sil680_init+0x0/0x16()
initcall 0xc06be8a3: sil680_init+0x0/0x16() returned 0.
initcall 0xc06be8a3 ran for 0 msecs: sil680_init+0x0/0x16()
Calling initcall 0xc06be8b9: via_init+0x0/0x16()
initcall 0xc06be8b9: via_init+0x0/0x16() returned 0.
initcall 0xc06be8b9 ran for 0 msecs: via_init+0x0/0x16()
Calling initcall 0xc06be8cf: sl82c105_init+0x0/0x16()
initcall 0xc06be8cf: sl82c105_init+0x0/0x16() returned 0.
initcall 0xc06be8cf ran for 0 msecs: sl82c105_init+0x0/0x16()
Calling initcall 0xc06be8e5: winbond_init+0x0/0x287()
initcall 0xc06be8e5: winbond_init+0x0/0x287() returned -19.
initcall 0xc06be8e5 ran for 0 msecs: winbond_init+0x0/0x287()
Calling initcall 0xc06beb6c: sis_init+0x0/0x16()
initcall 0xc06beb6c: sis_init+0x0/0x16() returned 0.
initcall 0xc06beb6c ran for 0 msecs: sis_init+0x0/0x16()
Calling initcall 0xc06beb82: triflex_init+0x0/0x16()
initcall 0xc06beb82: triflex_init+0x0/0x16() returned 0.
initcall 0xc06beb82 ran for 0 msecs: triflex_init+0x0/0x16()
Calling initcall 0xc06beb98: ata_generic_init+0x0/0x16()
initcall 0xc06beb98: ata_generic_init+0x0/0x16() returned 0.
initcall 0xc06beb98 ran for 0 msecs: ata_generic_init+0x0/0x16()
Calling initcall 0xc06bebae: cdrom_init+0x0/0xc()
initcall 0xc06bebae: cdrom_init+0x0/0xc() returned 0.
initcall 0xc06bebae ran for 0 msecs: cdrom_init+0x0/0xc()
Calling initcall 0xc06becbe: nonstatic_sysfs_init+0x0/0xf()
initcall 0xc06becbe: nonstatic_sysfs_init+0x0/0xf() returned 0.
initcall 0xc06becbe ran for 0 msecs: nonstatic_sysfs_init+0x0/0xf()
Calling initcall 0xc06beccd: yenta_socket_init+0x0/0x16()
initcall 0xc06beccd: yenta_socket_init+0x0/0x16() returned 0.
initcall 0xc06beccd ran for 0 msecs: yenta_socket_init+0x0/0x16()
Calling initcall 0xc06bef01: mon_init+0x0/0xee()
initcall 0xc06bef01: mon_init+0x0/0xee() returned 0.
initcall 0xc06bef01 ran for 0 msecs: mon_init+0x0/0xee()
Calling initcall 0xc06bf0be: ehci_hcd_init+0x0/0x16()
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall 0xc06bf0be: ehci_hcd_init+0x0/0x16() returned 0.
initcall 0xc06bf0be ran for 156 msecs: ehci_hcd_init+0x0/0x16()
Calling initcall 0xc06bf0d4: ohci_hcd_mod_init+0x0/0x39()
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xda102000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall 0xc06bf0d4: ohci_hcd_mod_init+0x0/0x39() returned 0.
initcall 0xc06bf0d4 ran for 190 msecs: ohci_hcd_mod_init+0x0/0x39()
Calling initcall 0xc06bf10d: uhci_hcd_init+0x0/0x91()
USB Universal Host Controller Interface driver v3.0
initcall 0xc06bf10d: uhci_hcd_init+0x0/0x91() returned 0.
initcall 0xc06bf10d ran for 4 msecs: uhci_hcd_init+0x0/0x91()
Calling initcall 0xc06bf19e: usb_usual_init+0x0/0x4c()
usbcore: registered new interface driver libusual
initcall 0xc06bf19e: usb_usual_init+0x0/0x4c() returned 0.
initcall 0xc06bf19e ran for 4 msecs: usb_usual_init+0x0/0x4c()
Calling initcall 0xc06bf26c: i8042_init+0x0/0x330()
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall 0xc06bf26c: i8042_init+0x0/0x330() returned 0.
initcall 0xc06bf26c ran for 15 msecs: i8042_init+0x0/0x330()
Calling initcall 0xc06bf59c: serport_init+0x0/0x2b()
initcall 0xc06bf59c: serport_init+0x0/0x2b() returned 0.
initcall 0xc06bf59c ran for 0 msecs: serport_init+0x0/0x2b()
Calling initcall 0xc06bf6ba: mousedev_init+0x0/0x51()
mice: PS/2 mouse device common for all mice
initcall 0xc06bf6ba: mousedev_init+0x0/0x51() returned 0.
initcall 0xc06bf6ba ran for 3 msecs: mousedev_init+0x0/0x51()
Calling initcall 0xc06bf70b: evdev_init+0x0/0xf()
initcall 0xc06bf70b: evdev_init+0x0/0xf() returned 0.
initcall 0xc06bf70b ran for 0 msecs: evdev_init+0x0/0xf()
Calling initcall 0xc06bf729: atkbd_init+0x0/0x20()
initcall 0xc06bf729: atkbd_init+0x0/0x20() returned 0.
initcall 0xc06bf729 ran for 0 msecs: atkbd_init+0x0/0x20()
Calling initcall 0xc06bf749: psmouse_init+0x0/0x64()
input: AT Translated Set 2 keyboard as /class/input/input0
initcall 0xc06bf749: psmouse_init+0x0/0x64() returned 0.
initcall 0xc06bf749 ran for 27 msecs: psmouse_init+0x0/0x64()
Calling initcall 0xc06c00e9: efivars_init+0x0/0x187()
initcall 0xc06c00e9: efivars_init+0x0/0x187() returned -19.
initcall 0xc06c00e9 ran for 0 msecs: efivars_init+0x0/0x187()
Calling initcall 0xc06c079b: hid_init+0x0/0x7()
initcall 0xc06c079b: hid_init+0x0/0x7() returned 0.
initcall 0xc06c079b ran for 0 msecs: hid_init+0x0/0x7()
Calling initcall 0xc06c07a2: usb_mouse_init+0x0/0x33()
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
initcall 0xc06c07a2: usb_mouse_init+0x0/0x33() returned 0.
initcall 0xc06c07a2 ran for 10 msecs: usb_mouse_init+0x0/0x33()
Calling initcall 0xc06c07d5: init_soundcore+0x0/0x50()
initcall 0xc06c07d5: init_soundcore+0x0/0x50() returned 0.
initcall 0xc06c07d5 ran for 0 msecs: init_soundcore+0x0/0x50()
Calling initcall 0xc06c0825: alsa_sound_init+0x0/0x77()
Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
initcall 0xc06c0825: alsa_sound_init+0x0/0x77() returned 0.
initcall 0xc06c0825 ran for 7 msecs: alsa_sound_init+0x0/0x77()
Calling initcall 0xc06c0a32: alsa_hwdep_init+0x0/0x46()
initcall 0xc06c0a32: alsa_hwdep_init+0x0/0x46() returned 0.
initcall 0xc06c0a32 ran for 0 msecs: alsa_hwdep_init+0x0/0x46()
Calling initcall 0xc06c0a78: alsa_timer_init+0x0/0x124()
initcall 0xc06c0a78: alsa_timer_init+0x0/0x124() returned 0.
initcall 0xc06c0a78 ran for 0 msecs: alsa_timer_init+0x0/0x124()
Calling initcall 0xc06c0b9c: rtctimer_init+0x0/0xe7()
initcall 0xc06c0b9c: rtctimer_init+0x0/0xe7() returned 0.
initcall 0xc06c0b9c ran for 0 msecs: rtctimer_init+0x0/0xe7()
Calling initcall 0xc06c0c83: alsa_pcm_init+0x0/0x4d()
initcall 0xc06c0c83: alsa_pcm_init+0x0/0x4d() returned 0.
initcall 0xc06c0c83 ran for 0 msecs: alsa_pcm_init+0x0/0x4d()
Calling initcall 0xc06c0cd0: snd_mem_init+0x0/0x28()
initcall 0xc06c0cd0: snd_mem_init+0x0/0x28() returned 0.
initcall 0xc06c0cd0 ran for 0 msecs: snd_mem_init+0x0/0x28()
Calling initcall 0xc06c0cf8: alsa_rawmidi_init+0x0/0x69()
initcall 0xc06c0cf8: alsa_rawmidi_init+0x0/0x69() returned 0.
initcall 0xc06c0cf8 ran for 0 msecs: alsa_rawmidi_init+0x0/0x69()
Calling initcall 0xc06c0d61: alsa_mixer_oss_init+0x0/0x2d()
initcall 0xc06c0d61: alsa_mixer_oss_init+0x0/0x2d() returned 0.
initcall 0xc06c0d61 ran for 0 msecs: alsa_mixer_oss_init+0x0/0x2d()
Calling initcall 0xc06c0d8e: alsa_pcm_oss_init+0x0/0x72()
initcall 0xc06c0d8e: alsa_pcm_oss_init+0x0/0x72() returned 0.
initcall 0xc06c0d8e ran for 0 msecs: alsa_pcm_oss_init+0x0/0x72()
Calling initcall 0xc06c0e00: alsa_seq_oss_init+0x0/0x146()
initcall 0xc06c0e00: alsa_seq_oss_init+0x0/0x146() returned 0.
initcall 0xc06c0e00 ran for 0 msecs: alsa_seq_oss_init+0x0/0x146()
Calling initcall 0xc06c1105: alsa_seq_init+0x0/0x51()
initcall 0xc06c1105: alsa_seq_init+0x0/0x51() returned 0.
initcall 0xc06c1105 ran for 0 msecs: alsa_seq_init+0x0/0x51()
Calling initcall 0xc06c1356: alsa_seq_device_init+0x0/0x4e()
initcall 0xc06c1356: alsa_seq_device_init+0x0/0x4e() returned 0.
initcall 0xc06c1356 ran for 0 msecs: alsa_seq_device_init+0x0/0x4e()
Calling initcall 0xc06c13a4: alsa_seq_midi_event_init+0x0/0x7()
initcall 0xc06c13a4: alsa_seq_midi_event_init+0x0/0x7() returned 0.
initcall 0xc06c13a4 ran for 0 msecs: alsa_seq_midi_event_init+0x0/0x7()
Calling initcall 0xc06c14f1: alsa_seq_dummy_init+0x0/0xa7()
initcall 0xc06c14f1: alsa_seq_dummy_init+0x0/0xa7() returned 0.
initcall 0xc06c14f1 ran for 0 msecs: alsa_seq_dummy_init+0x0/0xa7()
Calling initcall 0xc06c1598: alsa_seq_midi_init+0x0/0x32()
initcall 0xc06c1598: alsa_seq_midi_init+0x0/0x32() returned 0.
initcall 0xc06c1598 ran for 0 msecs: alsa_seq_midi_init+0x0/0x32()
Calling initcall 0xc06c15ca: alsa_seq_midi_emul_init+0x0/0x7()
initcall 0xc06c15ca: alsa_seq_midi_emul_init+0x0/0x7() returned 0.
initcall 0xc06c15ca ran for 0 msecs: alsa_seq_midi_emul_init+0x0/0x7()
Calling initcall 0xc06c15d1: alsa_virmidi_init+0x0/0x7()
initcall 0xc06c15d1: alsa_virmidi_init+0x0/0x7() returned 0.
initcall 0xc06c15d1 ran for 0 msecs: alsa_virmidi_init+0x0/0x7()
Calling initcall 0xc06c15d8: alsa_mpu401_uart_init+0x0/0x7()
initcall 0xc06c15d8: alsa_mpu401_uart_init+0x0/0x7() returned 0.
initcall 0xc06c15d8 ran for 0 msecs: alsa_mpu401_uart_init+0x0/0x7()
Calling initcall 0xc06c15df: alsa_card_mpu401_init+0x0/0x9f()
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
initcall 0xc06c15df: alsa_card_mpu401_init+0x0/0x9f() returned 0.
initcall 0xc06c15df ran for 530 msecs: alsa_card_mpu401_init+0x0/0x9f()
Calling initcall 0xc06c167e: alsa_card_intel8x0_init+0x0/0x16()
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 50212 usecs
intel8x0: clocking to 46799
initcall 0xc06c167e: alsa_card_intel8x0_init+0x0/0x16() returned 0.
initcall 0xc06c167e ran for 322 msecs: alsa_card_intel8x0_init+0x0/0x16()
Calling initcall 0xc06c1694: alsa_ac97_init+0x0/0x7()
initcall 0xc06c1694: alsa_ac97_init+0x0/0x7() returned 0.
initcall 0xc06c1694 ran for 0 msecs: alsa_ac97_init+0x0/0x7()
Calling initcall 0xc06c169b: alsa_card_emu10k1_init+0x0/0x16()
initcall 0xc06c169b: alsa_card_emu10k1_init+0x0/0x16() returned 0.
initcall 0xc06c169b ran for 0 msecs: alsa_card_emu10k1_init+0x0/0x16()
Calling initcall 0xc06c16b1: alsa_emu10k1_synth_init+0x0/0x19()
initcall 0xc06c16b1: alsa_emu10k1_synth_init+0x0/0x19() returned 0.
initcall 0xc06c16b1 ran for 0 msecs: alsa_emu10k1_synth_init+0x0/0x19()
Calling initcall 0xc06c16ca: alsa_card_emu10k1x_init+0x0/0x16()
initcall 0xc06c16ca: alsa_card_emu10k1x_init+0x0/0x16() returned 0.
initcall 0xc06c16ca ran for 0 msecs: alsa_card_emu10k1x_init+0x0/0x16()
Calling initcall 0xc06c16e0: alsa_card_azx_init+0x0/0x16()
initcall 0xc06c16e0: alsa_card_azx_init+0x0/0x16() returned 0.
initcall 0xc06c16e0 ran for 0 msecs: alsa_card_azx_init+0x0/0x16()
Calling initcall 0xc06c16f6: alsa_util_mem_init+0x0/0x7()
initcall 0xc06c16f6: alsa_util_mem_init+0x0/0x7() returned 0.
initcall 0xc06c16f6 ran for 0 msecs: alsa_util_mem_init+0x0/0x7()
Calling initcall 0xc06c16fd: alsa_emux_init+0x0/0x7()
initcall 0xc06c16fd: alsa_emux_init+0x0/0x7() returned 0.
initcall 0xc06c16fd ran for 0 msecs: alsa_emux_init+0x0/0x7()
Calling initcall 0xc06c1713: alsa_sound_last_init+0x0/0x50()
ALSA device list:
  #0: NVidia CK804 with ALC850 at irq 20
  #1: MPU-401 UART at 0x330, irq 10
initcall 0xc06c1713: alsa_sound_last_init+0x0/0x50() returned 0.
initcall 0xc06c1713 ran for 8 msecs: alsa_sound_last_init+0x0/0x50()
Calling initcall 0xc06c32b2: sysctl_core_init+0x0/0xf()
initcall 0xc06c32b2: sysctl_core_init+0x0/0xf() returned 0.
initcall 0xc06c32b2 ran for 0 msecs: sysctl_core_init+0x0/0xf()
Calling initcall 0xc06c37ac: flow_cache_init+0x0/0x154()
initcall 0xc06c37ac: flow_cache_init+0x0/0x154() returned 0.
initcall 0xc06c37ac ran for 0 msecs: flow_cache_init+0x0/0x154()
Calling initcall 0xc06c39d2: llc_init+0x0/0x6d()
initcall 0xc06c39d2: llc_init+0x0/0x6d() returned 0.
initcall 0xc06c39d2 ran for 0 msecs: llc_init+0x0/0x6d()
Calling initcall 0xc06c3a3f: snap_init+0x0/0x2a()
initcall 0xc06c3a3f: snap_init+0x0/0x2a() returned 0.
initcall 0xc06c3a3f ran for 0 msecs: snap_init+0x0/0x2a()
Calling initcall 0xc06c3a69: rif_init+0x0/0x7a()
initcall 0xc06c3a69: rif_init+0x0/0x7a() returned 0.
initcall 0xc06c3a69 ran for 0 msecs: rif_init+0x0/0x7a()
Calling initcall 0xc06c3b8c: blackhole_module_init+0x0/0xf()
initcall 0xc06c3b8c: blackhole_module_init+0x0/0xf() returned 0.
initcall 0xc06c3b8c ran for 0 msecs: blackhole_module_init+0x0/0xf()
Calling initcall 0xc06c3eb5: nfnetlink_init+0x0/0x4f()
Netfilter messages via NETLINK v0.30.
initcall 0xc06c3eb5: nfnetlink_init+0x0/0x4f() returned 0.
initcall 0xc06c3eb5 ran for 3 msecs: nfnetlink_init+0x0/0x4f()
Calling initcall 0xc06c3f04: nfnetlink_queue_init+0x0/0x85()
initcall 0xc06c3f04: nfnetlink_queue_init+0x0/0x85() returned 0.
initcall 0xc06c3f04 ran for 0 msecs: nfnetlink_queue_init+0x0/0x85()
Calling initcall 0xc06c3f89: nfnetlink_log_init+0x0/0x8a()
initcall 0xc06c3f89: nfnetlink_log_init+0x0/0x8a() returned 0.
initcall 0xc06c3f89 ran for 0 msecs: nfnetlink_log_init+0x0/0x8a()
Calling initcall 0xc06c4f91: sysctl_ipv4_init+0x0/0x1c()
initcall 0xc06c4f91: sysctl_ipv4_init+0x0/0x1c() returned 0.
initcall 0xc06c4f91 ran for 0 msecs: sysctl_ipv4_init+0x0/0x1c()
Calling initcall 0xc06c51bc: init_syncookies+0x0/0x16()
initcall 0xc06c51bc: init_syncookies+0x0/0x16() returned 0.
initcall 0xc06c51bc ran for 0 msecs: init_syncookies+0x0/0x16()
Calling initcall 0xc04552bc: ipv4_netfilter_init+0x0/0xf()
initcall 0xc04552bc: ipv4_netfilter_init+0x0/0xf() returned 0.
initcall 0xc04552bc ran for 0 msecs: ipv4_netfilter_init+0x0/0xf()
Calling initcall 0xc06c51d2: bictcp_register+0x0/0xf()
TCP bic registered
initcall 0xc06c51d2: bictcp_register+0x0/0xf() returned 0.
initcall 0xc06c51d2 ran for 1 msecs: bictcp_register+0x0/0xf()
Calling initcall 0xc06c540c: xfrm_user_init+0x0/0x4b()
Initializing XFRM netlink socket
initcall 0xc06c540c: xfrm_user_init+0x0/0x4b() returned 0.
initcall 0xc06c540c ran for 2 msecs: xfrm_user_init+0x0/0x4b()
Calling initcall 0xc06c5457: af_unix_init+0x0/0x47()
NET: Registered protocol family 1
initcall 0xc06c5457: af_unix_init+0x0/0x47() returned 0.
initcall 0xc06c5457 ran for 3 msecs: af_unix_init+0x0/0x47()
Calling initcall 0xc06c549e: packet_init+0x0/0x39()
NET: Registered protocol family 17
initcall 0xc06c549e: packet_init+0x0/0x39() returned 0.
initcall 0xc06c549e ran for 3 msecs: packet_init+0x0/0x39()
Calling initcall 0xc06c54d7: ipsec_pfkey_init+0x0/0x7a()
NET: Registered protocol family 15
initcall 0xc06c54d7: ipsec_pfkey_init+0x0/0x7a() returned 0.
initcall 0xc06c54d7 ran for 2 msecs: ipsec_pfkey_init+0x0/0x7a()
Calling initcall 0xc06a916c: powernow_init+0x0/0xd3()
initcall 0xc06a916c: powernow_init+0x0/0xd3() returned -19.
initcall 0xc06a916c ran for 0 msecs: powernow_init+0x0/0xd3()
Calling initcall 0xc048b662: powernowk8_init+0x0/0x72()
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
initcall 0xc048b662: powernowk8_init+0x0/0x72() returned -19.
initcall 0xc048b662 ran for 19 msecs: powernowk8_init+0x0/0x72()
Calling initcall 0xc06a9d46: centrino_init+0x0/0x2a()
initcall 0xc06a9d46: centrino_init+0x0/0x2a() returned -19.
initcall 0xc06a9d46 ran for 0 msecs: centrino_init+0x0/0x2a()
Calling initcall 0xc06a9dc4: hpet_insert_resource+0x0/0x1e()
initcall 0xc06a9dc4: hpet_insert_resource+0x0/0x1e() returned 1.
initcall 0xc06a9dc4 ran for 0 msecs: hpet_insert_resource+0x0/0x1e()
initcall at 0xc06a9dc4: hpet_insert_resource+0x0/0x1e(): returned with error code 1
Calling initcall 0xc06ad026: init_lapic_nmi_sysfs+0x0/0x33()
initcall 0xc06ad026: init_lapic_nmi_sysfs+0x0/0x33() returned 0.
initcall 0xc06ad026 ran for 0 msecs: init_lapic_nmi_sysfs+0x0/0x33()
Calling initcall 0xc06ad248: io_apic_bug_finalize+0x0/0x1c()
initcall 0xc06ad248: io_apic_bug_finalize+0x0/0x1c() returned 0.
initcall 0xc06ad248 ran for 0 msecs: io_apic_bug_finalize+0x0/0x1c()
Calling initcall 0xc06afd59: check_early_ioremap_leak+0x0/0x3d()
initcall 0xc06afd59: check_early_ioremap_leak+0x0/0x3d() returned 0.
initcall 0xc06afd59 ran for 0 msecs: check_early_ioremap_leak+0x0/0x3d()
Calling initcall 0xc06b01e2: print_ipi_mode+0x0/0x26()
Using IPI No-Shortcut mode
initcall 0xc06b01e2: print_ipi_mode+0x0/0x26() returned 0.
initcall 0xc06b01e2 ran for 2 msecs: print_ipi_mode+0x0/0x26()
Calling initcall 0xc013b2e9: init_oops_id+0x0/0x23()
initcall 0xc013b2e9: init_oops_id+0x0/0x23() returned 0.
initcall 0xc013b2e9 ran for 0 msecs: init_oops_id+0x0/0x23()
Calling initcall 0xc06b0cc8: disable_boot_consoles+0x0/0x36()
initcall 0xc06b0cc8: disable_boot_consoles+0x0/0x36() returned 0.
initcall 0xc06b0cc8 ran for 0 msecs: disable_boot_consoles+0x0/0x36()
Calling initcall 0xc06b1a2d: pm_qos_power_init+0x0/0x54()
initcall 0xc06b1a2d: pm_qos_power_init+0x0/0x54() returned 0.
initcall 0xc06b1a2d ran for 0 msecs: pm_qos_power_init+0x0/0x54()
Calling initcall 0xc0493d9c: debugfs_kprobe_init+0x0/0x78()
initcall 0xc0493d9c: debugfs_kprobe_init+0x0/0x78() returned 0.
initcall 0xc0493d9c ran for 0 msecs: debugfs_kprobe_init+0x0/0x78()
Calling initcall 0xc06b2a3b: taskstats_init+0x0/0x7d()
registered taskstats version 1
initcall 0xc06b2a3b: taskstats_init+0x0/0x7d() returned 0.
initcall 0xc06b2a3b ran for 2 msecs: taskstats_init+0x0/0x7d()
Calling initcall 0xc06b34a4: fail_page_alloc_debugfs+0x0/0xc1()
initcall 0xc06b34a4: fail_page_alloc_debugfs+0x0/0xc1() returned 0.
initcall 0xc06b34a4 ran for 0 msecs: fail_page_alloc_debugfs+0x0/0xc1()
Calling initcall 0xc06b456e: failslab_debugfs+0x0/0x58()
initcall 0xc06b456e: failslab_debugfs+0x0/0x58() returned 0.
initcall 0xc06b456e ran for 0 msecs: failslab_debugfs+0x0/0x58()
Calling initcall 0xc06b6b38: fail_make_request_debugfs+0x0/0x14()
initcall 0xc06b6b38: fail_make_request_debugfs+0x0/0x14() returned 0.
initcall 0xc06b6b38 ran for 0 msecs: fail_make_request_debugfs+0x0/0x14()
Calling initcall 0xc06b6f99: random32_reseed+0x0/0x57()
initcall 0xc06b6f99: random32_reseed+0x0/0x57() returned 0.
initcall 0xc06b6f99 ran for 0 msecs: random32_reseed+0x0/0x57()
Calling initcall 0xc06b7641: pci_sysfs_init+0x0/0x44()
initcall 0xc06b7641: pci_sysfs_init+0x0/0x44() returned 0.
initcall 0xc06b7641 ran for 0 msecs: pci_sysfs_init+0x0/0x44()
Calling initcall 0xc06b8436: acpi_wakeup_device_init+0x0/0x9a()
initcall 0xc06b8436: acpi_wakeup_device_init+0x0/0x9a() returned 0.
initcall 0xc06b8436 ran for 0 msecs: acpi_wakeup_device_init+0x0/0x9a()
Calling initcall 0xc06b85bc: acpi_sleep_proc_init+0x0/0x81()
initcall 0xc06b85bc: acpi_sleep_proc_init+0x0/0x81() returned 0.
initcall 0xc06b85bc ran for 0 msecs: acpi_sleep_proc_init+0x0/0x81()
Calling initcall 0xc06bacfb: seqgen_init+0x0/0xe()
initcall 0xc06bacfb: seqgen_init+0x0/0xe() returned 0.
initcall 0xc06bacfb ran for 0 msecs: seqgen_init+0x0/0xe()
Calling initcall 0xc02ecf3a: scsi_complete_async_scans+0x0/0xcd()
initcall 0xc02ecf3a: scsi_complete_async_scans+0x0/0xcd() returned 0.
initcall 0xc02ecf3a ran for 0 msecs: scsi_complete_async_scans+0x0/0xcd()
Calling initcall 0xc06c202c: pci_mmcfg_late_insert_resources+0x0/0x41()
initcall 0xc06c202c: pci_mmcfg_late_insert_resources+0x0/0x41() returned 0.
initcall 0xc06c202c ran for 0 msecs: pci_mmcfg_late_insert_resources+0x0/0x41()
Calling initcall 0xc06c46d0: tcp_congestion_default+0x0/0xf()
initcall 0xc06c46d0: tcp_congestion_default+0x0/0xf() returned 0.
initcall 0xc06c46d0 ran for 0 msecs: tcp_congestion_default+0x0/0xf()
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 312k freed
Write protecting the kernel text: 3672k
Write protecting the kernel read-only data: 1612k
BUG: sleeping function called from invalid context at mm/rmap.c:62
in_atomic():0, irqs_disabled():1
1 lock held by init/642:
 #0:  (&mm->mmap_sem){----}, at: [<c049372c>] do_page_fault+0x1f9/0x5ad
irq event stamp: 8
hardirqs last  enabled at (7): [<c0156713>] trace_hardirqs_on+0xb/0xd
hardirqs last disabled at (8): [<c0236724>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last  enabled at (0): [<c0139919>] copy_process+0x2fe/0x12e8
softirqs last disabled at (0): [<00000000>] 0x0
Pid: 642, comm: init Not tainted 2.6.25-rc6-sched-devel.git-x86-latest.git #321
 [<c013422e>] __might_sleep+0xc2/0xc9
 [<c017ffde>] anon_vma_prepare+0x1d/0xc4
 [<c0179c13>] do_wp_page+0x1ab/0x3d0
 [<c017b70a>] handle_mm_fault+0x538/0x590
 [<c049372c>] ? do_page_fault+0x1f9/0x5ad
 [<c014f040>] ? down_read_trylock+0x37/0x41
 [<c04937e6>] do_page_fault+0x2b3/0x5ad
 [<c0493533>] ? do_page_fault+0x0/0x5ad
 [<c0491e7a>] error_code+0x72/0x78
 =======================
------------[ cut here ]------------
kernel BUG at fs/buffer.c:1274!
invalid opcode: 0000 [#1] PREEMPT SMP 
Modules linked in:

Pid: 645, comm: rc.sysinit Not tainted (2.6.25-rc6-sched-devel.git-x86-latest.git #321)
EIP: 0060:[<c01a818d>] EFLAGS: 00010046 CPU: 1
EIP is at __find_get_block+0x17/0x16a
EAX: 00000086 EBX: f7832698 ECX: 00000000 EDX: 00212800
ESI: 00212800 EDI: 00000000 EBP: f7fffba8 ESP: f7fffb6c
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process rc.sysinit (pid: 645, ti=f7fff000 task=f76082b0 task.ti=f7fff000)
Stack: f7802340 f7fffc60 f7618000 00000001 00000046 f782dcc0 00212800 00000000 
       00000046 f78221d0 0000027c 0003fc43 f7832698 00000000 f782ddac f7fffc00 
       c01a82fa 00001000 00212800 00000000 f7802340 00000000 00000000 f7f76a40 
Call Trace:
 [<c01a82fa>] ? __getblk+0x1a/0x26b
 [<c01cc282>] ? ext3_getblk+0x4c/0x169
 [<c01cc2d4>] ? ext3_getblk+0x9e/0x169
 [<c01cd03d>] ? ext3_bread+0x14/0x73
 [<c02376ba>] ? random32+0x32/0x4c
 [<c01cf2cd>] ? dx_probe+0x37/0x27e
 [<c015546f>] ? trace_hardirqs_off+0xb/0xd
 [<c01cfd7c>] ? ext3_find_entry+0xd8/0x596
 [<c0491afc>] ? _spin_unlock+0x27/0x3c
 [<c01d0aa3>] ? ext3_lookup+0x25/0xa2
 [<c01926b0>] ? do_lookup+0xa9/0x146
 [<c0194270>] ? __link_path_walk+0x702/0xa8c
 [<c015655c>] ? mark_held_locks+0x4e/0x66
 [<c01566d3>] ? trace_hardirqs_on_caller+0xe0/0x115
 [<c0156713>] ? trace_hardirqs_on+0xb/0xd
 [<c019463b>] ? link_path_walk+0x41/0x95
 [<c0491afc>] ? _spin_unlock+0x27/0x3c
 [<c01946a8>] ? path_walk+0x19/0x1b
 [<c01948cc>] ? do_path_lookup+0x134/0x19a
 [<c01951b6>] ? __path_lookup_intent_open+0x42/0x74
 [<c0195241>] ? path_lookup_open+0x10/0x12
 [<c019530e>] ? open_namei+0x64/0x507
 [<c018a9b2>] ? do_filp_open+0x1f/0x35
 [<c0491afc>] ? _spin_unlock+0x27/0x3c
 [<c018aa08>] ? do_sys_open+0x40/0xb5
 [<c018aaa9>] ? sys_open+0x16/0x18
 [<c0117a16>] ? syscall_call+0x7/0xb
 =======================
Code: 0b 8b 43 10 89 73 0c 83 c0 74 e8 64 99 2e 00 5b 5e 5f 5d c3 55 89 e5 57 89 cf 56 89 d6 53 83 ec 30 89 45 c4 9c 58 f6 c4 02 75 04 <0f> 0b eb fe fa e8 cd d2 fa ff bb 64 a7 6e c0 e8 43 ab 09 00 31 
EIP: [<c01a818d>] __find_get_block+0x17/0x16a SS:ESP 0068:f7fffb6c
---[ end trace 7fc93f2a1fd9073c ]---

[-- Attachment #3: config --]
[-- Type: text/plain, Size: 75667 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
# Fri Mar 21 15:23:56 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_CLASSIC_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
# CONFIG_IRQBALANCE is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
CONFIG_MSI_LAPTOP=m
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=1000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=1000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_LEGACY=m
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_WINBOND_VLB=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=m
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
CONFIG_EWRK3=m
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
# CONFIG_SMCTR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
CONFIG_SERIAL_8250_EXAR_ST16C554=m
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_S5H1409 is not set

#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TDA827X=m
# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
CONFIG_DVB_TUNER_MT2060=m
CONFIG_DVB_TUNER_MT2266=m
# CONFIG_DVB_TUNER_MT2131 is not set
CONFIG_DVB_TUNER_DIB0070=m
# CONFIG_DVB_TUNER_XC5000 is not set

#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_IMAC is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MIXART is not set
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SIS7019 is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
# CONFIG_EDAC_I5000 is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# Conflicting RTC option has been selected, check GEN_RTC and RTC
#

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_NONPROMISC_DEVMEM=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
# CONFIG_SYSPROF is not set
CONFIG_MMIOTRACE_HOOKS=y
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
>   
>>> Hm.  I think the problem was that the patch changed the ordering so 
>>> that the %ebp fault test was happening with interrupts disabled, 
>>> meaning that any fault-in would happen with interrupts disabled.
>>>
>>> Could you tell me if this revised patch still provokes a problem?
>>>       
>> it's looking good so far - queued it up.
>>     
>
> it just crashed again, crashlog and config attached. This time it didnt 
> need an irq flood.
>   

Hm.  I presume it happens immediately/consistently.  Is it something 
particular about this .config?  Do other configs work for you?

Thanks,
    J

Re: [PATCH 00 of 31] x86: unification and xen updates

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

>> it just crashed again, crashlog and config attached. This time it 
>> didnt need an irq flood.
>
> Hm.  I presume it happens immediately/consistently.  Is it something 
> particular about this .config?  Do other configs work for you?

it's a generic distro config this time around. It crashed on the first 
attempt.

	Ingo

Re: [PATCH 00 of 31] x86: unification and xen updates

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>   
>>> it just crashed again, crashlog and config attached. This time it 
>>> didnt need an irq flood.
>>>       
>> Hm.  I presume it happens immediately/consistently.  Is it something 
>> particular about this .config?  Do other configs work for you?
>>     
>
> it's a generic distro config this time around. It crashed on the first 
> attempt.

I haven't had a chance to try this on real hardware yet, but could you 
confirm that booting with "nosep" avoids the problem?  If not, then some 
deep voodoo is going on...

Thanks,
    J