* [Bluez-users] connection problem between samsung mobile phone nad bluez 3.8in slackware 11
@ 2007-02-13 9:18 Mirosław Malach
0 siblings, 0 replies; 3+ messages in thread
From: Mirosław Malach @ 2007-02-13 9:18 UTC (permalink / raw)
To: bluez-users
hello
I have problem with connection between my usb bluetooth and =
samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib and ut=
ils). for easy diagnostic I sending for you output same commands =
and comments =
=
lsusb :
Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Blue=
tooth Adapter
hciconfig -a =
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN
RX bytes:7001 acl:10 sco:0 events:265 errors:0
TX bytes:1665 acl:10 sco:0 commands:110 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: MASTER
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object Transfer,=
Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x=
1fe
Manufacturer: Integrated System Solution Corp. (57)
hcitool scan
Scanning ...
00:17:D5:47:4E:88 Mir - this is my mobile phone
hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d
my mobile phone hasn't seen my usb bluetooth =
When I have tried connect to my phone I haven't got any error but this lin=
k hasn't work . =
command l2ping to phone work very well.
hcitool con
Connections:
Could you tell me weher is problem ?
kind regards =
Miroslaw Malach
=
----------------------------------------------------
W stylu Joanny Brodzik.
Zobacz jak ubiera si=EA prawdziwa gwiazda! Kliknij:
http://klik.wp.pl/?adr=3Dhttp%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd69.html&sid=
=3D1018
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Bluez-users] connection problem between samsung mobile phone nad bluez 3.8in slackware 11
2007-02-13 16:25 Mirosław Malach
@ 2007-02-13 16:29 ` Marcel Holtmann
0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2007-02-13 16:29 UTC (permalink / raw)
To: BlueZ users
Hi Miroslaw,
> I have problem with connection between my usb bluetooth and
> samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib and utils). for essy diagnostic I sending for you output same commands
> and comments
>
> lsusb :
>
> Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
>
> hciconfig -a
>
> hci0: Type: USB
> BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
> UP RUNNING PSCAN
> RX bytes:7001 acl:10 sco:0 events:265 errors:0
> TX bytes:1665 acl:10 sco:0 commands:110 errors:0
> Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: MASTER
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing, Object Transfer, Audio
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe
> Manufacturer: Integrated System Solution Corp. (57)
> hcitool scan
> Scanning ...
>
> 00:17:D5:47:4E:88 Mir
>
> hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d
>
> my mobile phone hasn't seen my usb bluetooth
> When I have tried connect to my phone I haven't got any error but this link hasn't work .
> command l2ping to phone work very well.
>
> hcitool con
> Connections:
>
>
>
> I see my phon by kbluetooth but
> when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump work in beckground) my phone askin my about pin. I write pin from my hcid.conf section passkey "1111"; and security auto but connection broken becous I see on my phone "pin invaide"
>
> output hcidump -X -V
> > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 1 packets 1
> > HCI Event: PIN Code Request (0x16) plen 6
> bdaddr 00:17:D5:47:4E:88
> < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> bdaddr 00:17:D5:47:4E:88
> > HCI Event: Command Complete (0x0e) plen 10
> PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
> status 0x00 bdaddr 00:17:D5:47:4E:88
> > HCI Event: Auth Complete (0x06) plen 3
> status 0x06 handle 1
> Error: PIN or Key Missing
>
>
> Could you tell me where is problem ?
you might wanna check the syslog. My guess is that you don't have a
passkey agent running.
Regards
Marcel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bluez-users] connection problem between samsung mobile phone nad bluez 3.8in slackware 11
@ 2007-02-13 16:25 Mirosław Malach
2007-02-13 16:29 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Mirosław Malach @ 2007-02-13 16:25 UTC (permalink / raw)
To: bluez-users
hello
I have problem with connection between my usb bluetooth and =
samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib and ut=
ils). for essy diagnostic I sending for you output same commands =
and comments =
=
lsusb :
Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Blue=
tooth Adapter
hciconfig -a =
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN
RX bytes:7001 acl:10 sco:0 events:265 errors:0
TX bytes:1665 acl:10 sco:0 commands:110 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: MASTER
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object Transfer,=
Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x=
1fe
Manufacturer: Integrated System Solution Corp. (57)
hcitool scan
Scanning ...
00:17:D5:47:4E:88 Mir
hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d
my mobile phone hasn't seen my usb bluetooth =
When I have tried connect to my phone I haven't got any error but this lin=
k hasn't work . =
command l2ping to phone work very well.
hcitool con
Connections:
I see my phon by kbluetooth but
when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump work in =
beckground) my phone askin my about pin. I write pin from my hcid.conf sect=
ion passkey "1111"; and security auto but connection broken becous I see on=
my phone "pin invaide"
output hcidump -X -V
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:17:D5:47:4E:88
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:17:D5:47:4E:88
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:17:D5:47:4E:88
> HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 1
Error: PIN or Key Missing
Could you tell me where is problem ?
kind regards =
Miroslaw Malach
=
----------------------------------------------------
Ju=BF za miesi=B1c dj TIESTO we Wroc=B3awiu! =
Prze=BFyj kwietniow=B1 eksplozj=EA =BFywio=B3=F3w - Zobacz:
http://klik.wp.pl/?adr=3Dhttp%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd66.html&sid=
=3D1016
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-02-13 16:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-13 9:18 [Bluez-users] connection problem between samsung mobile phone nad bluez 3.8in slackware 11 Mirosław Malach
2007-02-13 16:25 Mirosław Malach
2007-02-13 16:29 ` Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.