* [patch/RFC] ath9k mesh mode
@ 2009-03-10 5:53 pat-lkml
2009-03-10 6:55 ` Andrey Yurovsky
0 siblings, 1 reply; 2+ messages in thread
From: pat-lkml @ 2009-03-10 5:53 UTC (permalink / raw)
To: linux-wireless; +Cc: brian, andrey, javier, colin
This patch begins the work to getting mesh mode working with ath9k. I am
using the b43 and rt2x00 drivers as templates on how to do this.
Unfortunately it doesn't seem to work yet. In attempting to set up a mesh between
an ath9k device and a b43 device, the ath9k device does not seem to be enabling
beaconing. I have a third device in monitor mode that sees the b43 beacons,
sees ath9k responding to them (I believe trying to establish a link), and b43
is acknowledging those responses, but no link is established. On the same ath9k
device, I'm not seeing beaconing in ad-hoc mode, which leads me to believe that
beaconing may be broken right now for my Atheros device. What am I doing wrong?
Atheros HW: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf9280000, irq=17
b43 HW: BCM4306 802.11b/g (rev 5)
---
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 039c781..cbd94dd 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -70,7 +70,8 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
ds = bf->bf_desc;
flags = ATH9K_TXDESC_NOACK;
- if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC &&
+ if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) &&
(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
ds->ds_link = bf->bf_daddr; /* self-linked */
flags |= ATH9K_TXDESC_VEOL;
@@ -727,6 +728,8 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
case NL80211_IFTYPE_AP:
ath_beacon_config_ap(sc, &conf, avp);
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* Handle mesh beaconing just like ad-hoc */
case NL80211_IFTYPE_ADHOC:
ath_beacon_config_adhoc(sc, &conf, avp, vif);
break;
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index c10b33b..06376aa 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -1430,6 +1430,8 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
| AR_STA_ID1_KSRCH_MODE);
REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* Configure HW same as ADHOC */
case NL80211_IFTYPE_ADHOC:
REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC
| AR_STA_ID1_KSRCH_MODE);
@@ -3135,6 +3137,8 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
flags |= AR_TBTT_TIMER_EN;
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* Should IBSS style beaconing be used for mesh point? */
case NL80211_IFTYPE_ADHOC:
REG_SET_BIT(ah, AR_TXCFG,
AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 5268697..e76e0de 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1590,6 +1590,7 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_ADHOC);
hw->wiphy->reg_notifier = ath9k_reg_notifier;
@@ -2198,18 +2199,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
ic_opmode = NL80211_IFTYPE_STATION;
break;
case NL80211_IFTYPE_ADHOC:
- if (sc->nbcnvifs >= ATH_BCBUF) {
- ret = -ENOBUFS;
- goto out;
- }
- ic_opmode = NL80211_IFTYPE_ADHOC;
- break;
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
if (sc->nbcnvifs >= ATH_BCBUF) {
ret = -ENOBUFS;
goto out;
}
- ic_opmode = NL80211_IFTYPE_AP;
+ ic_opmode = conf->type;
break;
default:
DPRINTF(sc, ATH_DBG_FATAL,
@@ -2242,10 +2238,11 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
/*
* Enable MIB interrupts when there are hardware phy counters.
- * Note we only do this (at the moment) for station mode.
+ * Note we only do this (at the moment) for non AP modes.
*/
if ((conf->type == NL80211_IFTYPE_STATION) ||
- (conf->type == NL80211_IFTYPE_ADHOC)) {
+ (conf->type == NL80211_IFTYPE_ADHOC) ||
+ (conf->type == NL80211_IFTYPE_MESH_POINT)) {
if (ath9k_hw_phycounters(sc->sc_ah))
sc->imask |= ATH9K_INT_MIB;
sc->imask |= ATH9K_INT_TSFOOR;
@@ -2292,8 +2289,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
del_timer_sync(&sc->ani.timer);
/* Reclaim beacon resources */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
- sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) {
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
+ (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath_beacon_return(sc, avp);
}
@@ -2446,10 +2444,31 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
default:
break;
}
+ } else if ((vif->type == NL80211_IFTYPE_MESH_POINT) && (conf->bssid)) {
+ /* Both b43 and rt2x00 set the bssid in the case that one
+ * is passed durint interface config, irregardless of the
+ * status of conf->changed */
+
+ /* Set BSSID */
+ memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
+ memcpy(avp->bssid, conf->bssid, ETH_ALEN);
+ sc->curaid = 0;
+ ath9k_hw_write_associd(sc);
+
+ /* Set aggregation protection mode parameters */
+ sc->config.ath_aggr_prot = 0;
+
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "RX filter 0x%x bssid %pM aid 0x%x\n",
+ rfilt, sc->curbssid, sc->curaid);
+
+ /* need to reconfigure the beacon */
+ sc->sc_flags &= ~SC_OP_BEACONS ;
}
if ((vif->type == NL80211_IFTYPE_ADHOC) ||
- (vif->type == NL80211_IFTYPE_AP)) {
+ (vif->type == NL80211_IFTYPE_AP) ||
+ (vif->type == NL80211_IFTYPE_MESH_POINT)) {
if ((conf->changed & IEEE80211_IFCC_BEACON) ||
(conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
conf->enable_beacon)) {
@@ -2482,8 +2501,9 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
sc->curbssid);
}
- /* Only legacy IBSS for now */
- if (vif->type == NL80211_IFTYPE_ADHOC)
+ /* Only legacy IBSS and Mesh Point for now */
+ if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+ (vif->type == NL80211_IFTYPE_MESH_POINT))
ath_update_chainmask(sc, 0);
mutex_unlock(&sc->mutex);
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 8327356..61f8334 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1615,7 +1615,8 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
/* Choose rate table first */
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
+ (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
rate_table = ath_choose_rate_table(sc, sband->band,
sta->ht_cap.ht_supported,
is_cw40);
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [patch/RFC] ath9k mesh mode
2009-03-10 5:53 [patch/RFC] ath9k mesh mode pat-lkml
@ 2009-03-10 6:55 ` Andrey Yurovsky
0 siblings, 0 replies; 2+ messages in thread
From: Andrey Yurovsky @ 2009-03-10 6:55 UTC (permalink / raw)
To: pat-lkml; +Cc: linux-wireless, brian, javier, colin
I would also look at the ath5k driver as (last time I looked) it is
quite similar to ath9k in how mesh beacons would be handled and the RX
filter configuration code is nearly identical.
On Mon, Mar 9, 2009 at 10:53 PM, pat-lkml <pat-lkml@erley.org> wrote:
> This patch begins the work to getting mesh mode working with ath9k. =A0=
I am
> using the b43 and rt2x00 drivers as templates on how to do this.
>
> Unfortunately it doesn't seem to work yet. =A0In attempting to set up=
a mesh between
> an ath9k device and a b43 device, the ath9k device does not seem to b=
e enabling
> beaconing. =A0I have a third device in monitor mode that sees the b43=
beacons,
> sees ath9k responding to them (I believe trying to establish a link),=
and b43
> is acknowledging those responses, but no link is established. =A0On t=
he same ath9k
> device, I'm not seeing beaconing in ad-hoc mode, which leads me to be=
lieve that
> beaconing may be broken right now for my Atheros device. =A0What am I=
doing wrong?
>
> Atheros HW: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=3D0xf92=
80000, irq=3D17
> b43 HW: BCM4306 802.11b/g (rev 5)
>
> ---
> diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wirele=
ss/ath9k/beacon.c
> index 039c781..cbd94dd 100644
> --- a/drivers/net/wireless/ath9k/beacon.c
> +++ b/drivers/net/wireless/ath9k/beacon.c
> @@ -70,7 +70,8 @@ static void ath_beacon_setup(struct ath_softc *sc, =
struct ath_vif *avp,
> =A0 =A0 =A0 =A0ds =3D bf->bf_desc;
> =A0 =A0 =A0 =A0flags =3D ATH9K_TXDESC_NOACK;
>
> - =A0 =A0 =A0 if (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC &&
> + =A0 =A0 =A0 if (((sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC) ||
> + =A0 =A0 =A0 =A0 =A0 =A0(sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_MES=
H_POINT)) &&
> =A0 =A0 =A0 =A0 =A0 =A0(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ds->ds_link =3D bf->bf_daddr; /* self-=
linked */
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0flags |=3D ATH9K_TXDESC_VEOL;
> @@ -727,6 +728,8 @@ void ath_beacon_config(struct ath_softc *sc, stru=
ct ieee80211_vif *vif)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0case NL80211_IFTYPE_AP:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_beacon_config_ap(s=
c, &conf, avp);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 case NL80211_IFTYPE_MESH_POINT:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Handle mesh beaconin=
g just like ad-hoc */
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0case NL80211_IFTYPE_ADHOC:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_beacon_config_adho=
c(sc, &conf, avp, vif);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/a=
th9k/hw.c
> index c10b33b..06376aa 100644
> --- a/drivers/net/wireless/ath9k/hw.c
> +++ b/drivers/net/wireless/ath9k/hw.c
> @@ -1430,6 +1430,8 @@ static void ath9k_hw_set_operating_mode(struct =
ath_hw *ah, int opmode)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| AR_STA_ID1_KSRCH=
_MODE);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHO=
C_INDICATION);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> + =A0 =A0 =A0 case NL80211_IFTYPE_MESH_POINT:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Configure HW same as ADHOC */
> =A0 =A0 =A0 =A0case NL80211_IFTYPE_ADHOC:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0REG_WRITE(ah, AR_STA_ID1, val | AR_STA=
_ID1_ADHOC
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| AR_STA_ID1_KSRCH=
_MODE);
> @@ -3135,6 +3137,8 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32=
next_beacon, u32 beacon_period)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0flags |=3D AR_TBTT_TIMER_EN;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> + =A0 =A0 =A0 case NL80211_IFTYPE_MESH_POINT:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Should IBSS style beaconing be used =
for mesh point? */
> =A0 =A0 =A0 =A0case NL80211_IFTYPE_ADHOC:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0REG_SET_BIT(ah, AR_TXCFG,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0AR_TXCFG_ADHOC=
_BEACON_ATIM_TX_POLICY);
> diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless=
/ath9k/main.c
> index 5268697..e76e0de 100644
> --- a/drivers/net/wireless/ath9k/main.c
> +++ b/drivers/net/wireless/ath9k/main.c
> @@ -1590,6 +1590,7 @@ void ath_set_hw_capab(struct ath_softc *sc, str=
uct ieee80211_hw *hw)
> =A0 =A0 =A0 =A0hw->wiphy->interface_modes =3D
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0BIT(NL80211_IFTYPE_AP) |
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0BIT(NL80211_IFTYPE_STATION) |
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 BIT(NL80211_IFTYPE_MESH_POINT) |
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0BIT(NL80211_IFTYPE_ADHOC);
>
> =A0 =A0 =A0 =A0hw->wiphy->reg_notifier =3D ath9k_reg_notifier;
> @@ -2198,18 +2199,13 @@ static int ath9k_add_interface(struct ieee802=
11_hw *hw,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ic_opmode =3D NL80211_IFTYPE_STATION;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> =A0 =A0 =A0 =A0case NL80211_IFTYPE_ADHOC:
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (sc->nbcnvifs >=3D ATH_BCBUF) {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ret =3D -ENOBUFS;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ic_opmode =3D NL80211_IFTYPE_ADHOC;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
> =A0 =A0 =A0 =A0case NL80211_IFTYPE_AP:
> + =A0 =A0 =A0 case NL80211_IFTYPE_MESH_POINT:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if (sc->nbcnvifs >=3D ATH_BCBUF) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ret =3D -ENOBUFS;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0goto out;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0}
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ic_opmode =3D NL80211_IFTYPE_AP;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ic_opmode =3D conf->type;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> =A0 =A0 =A0 =A0default:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0DPRINTF(sc, ATH_DBG_FATAL,
> @@ -2242,10 +2238,11 @@ static int ath9k_add_interface(struct ieee802=
11_hw *hw,
>
> =A0 =A0 =A0 =A0/*
> =A0 =A0 =A0 =A0 * Enable MIB interrupts when there are hardware phy c=
ounters.
> - =A0 =A0 =A0 =A0* Note we only do this (at the moment) for station m=
ode.
> + =A0 =A0 =A0 =A0* Note we only do this (at the moment) for non AP mo=
des.
> =A0 =A0 =A0 =A0 */
> =A0 =A0 =A0 =A0if ((conf->type =3D=3D NL80211_IFTYPE_STATION) ||
> - =A0 =A0 =A0 =A0 =A0 (conf->type =3D=3D NL80211_IFTYPE_ADHOC)) {
> + =A0 =A0 =A0 =A0 =A0 (conf->type =3D=3D NL80211_IFTYPE_ADHOC) ||
> + =A0 =A0 =A0 =A0 =A0 (conf->type =3D=3D NL80211_IFTYPE_MESH_POINT)) =
{
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if (ath9k_hw_phycounters(sc->sc_ah))
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sc->imask |=3D ATH9K_I=
NT_MIB;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sc->imask |=3D ATH9K_INT_TSFOOR;
> @@ -2292,8 +2289,9 @@ static void ath9k_remove_interface(struct ieee8=
0211_hw *hw,
> =A0 =A0 =A0 =A0del_timer_sync(&sc->ani.timer);
>
> =A0 =A0 =A0 =A0/* Reclaim beacon resources */
> - =A0 =A0 =A0 if (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_AP ||
> - =A0 =A0 =A0 =A0 =A0 sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC) =
{
> + =A0 =A0 =A0 if ((sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_AP) ||
> + =A0 =A0 =A0 =A0 =A0 (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC)=
||
> + =A0 =A0 =A0 =A0 =A0 (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_MESH_P=
OINT)) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath9k_hw_stoptxdma(sc->sc_ah, sc->beac=
on.beaconq);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_beacon_return(sc, avp);
> =A0 =A0 =A0 =A0}
> @@ -2446,10 +2444,31 @@ static int ath9k_config_interface(struct ieee=
80211_hw *hw,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0default:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0}
> + =A0 =A0 =A0 } else if ((vif->type =3D=3D NL80211_IFTYPE_MESH_POINT)=
&& (conf->bssid)) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Both b43 and rt2x00 set the bssid in=
the case that one
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* is passed durint interface config,=
irregardless of the
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* status of conf->changed */
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Set BSSID */
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 memcpy(sc->curbssid, conf->bssid, ETH_A=
LEN);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 memcpy(avp->bssid, conf->bssid, ETH_ALE=
N);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 sc->curaid =3D 0;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath9k_hw_write_associd(sc);
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Set aggregation protection mode para=
meters */
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 sc->config.ath_aggr_prot =3D 0;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 DPRINTF(sc, ATH_DBG_CONFIG,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "RX filter 0x%x bssid %=
pM aid 0x%x\n",
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 rfilt, sc->curbssid, sc=
->curaid);
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* need to reconfigure the beacon */
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 sc->sc_flags &=3D ~SC_OP_BEACONS ;
> =A0 =A0 =A0 =A0}
>
> =A0 =A0 =A0 =A0if ((vif->type =3D=3D NL80211_IFTYPE_ADHOC) ||
> - =A0 =A0 =A0 =A0 =A0 (vif->type =3D=3D NL80211_IFTYPE_AP)) {
> + =A0 =A0 =A0 =A0 =A0 (vif->type =3D=3D NL80211_IFTYPE_AP) ||
> + =A0 =A0 =A0 =A0 =A0 (vif->type =3D=3D NL80211_IFTYPE_MESH_POINT)) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if ((conf->changed & IEEE80211_IFCC_BE=
ACON) ||
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0(conf->changed & IEEE80211_IFC=
C_BEACON_ENABLED &&
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 conf->enable_beacon)) {
> @@ -2482,8 +2501,9 @@ static int ath9k_config_interface(struct ieee80=
211_hw *hw,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 sc->curbssid);
> =A0 =A0 =A0 =A0}
>
> - =A0 =A0 =A0 /* Only legacy IBSS for now */
> - =A0 =A0 =A0 if (vif->type =3D=3D NL80211_IFTYPE_ADHOC)
> + =A0 =A0 =A0 /* Only legacy IBSS and Mesh Point for now */
> + =A0 =A0 =A0 if ((vif->type =3D=3D NL80211_IFTYPE_ADHOC) ||
> + =A0 =A0 =A0 =A0 =A0 (vif->type =3D=3D NL80211_IFTYPE_MESH_POINT))
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_update_chainmask(sc, 0);
>
> =A0 =A0 =A0 =A0mutex_unlock(&sc->mutex);
> diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/a=
th9k/rc.c
> index 8327356..61f8334 100644
> --- a/drivers/net/wireless/ath9k/rc.c
> +++ b/drivers/net/wireless/ath9k/rc.c
> @@ -1615,7 +1615,8 @@ static void ath_rate_init(void *priv, struct ie=
ee80211_supported_band *sband,
> =A0 =A0 =A0 =A0/* Choose rate table first */
>
> =A0 =A0 =A0 =A0if ((sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_STATION) =
||
> - =A0 =A0 =A0 =A0 =A0 (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC)=
) {
> + =A0 =A0 =A0 =A0 =A0 (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_ADHOC)=
||
> + =A0 =A0 =A0 =A0 =A0 (sc->sc_ah->opmode =3D=3D NL80211_IFTYPE_MESH_P=
OINT)) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0rate_table =3D ath_choose_rate_table(s=
c, sband->band,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 sta->ht_cap.ht_supported,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 is_cw40);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wirel=
ess" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at =A0http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-03-10 6:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-03-10 5:53 [patch/RFC] ath9k mesh mode pat-lkml
2009-03-10 6:55 ` Andrey Yurovsky
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.