* [PATCH UPDATED] fix typo in drivers/block/Kconfig
@ 2007-03-27 19:31 Patrick Ringl
0 siblings, 0 replies; 2+ messages in thread
From: Patrick Ringl @ 2007-03-27 19:31 UTC (permalink / raw)
To: linux-kernel; +Cc: torvalds, jens.axboe
[-- Attachment #1: Type: text/plain, Size: 964 bytes --]
Hello,
[ ... Fixed two minor typos. ...]
The following patch (it's also attached tho) is against 2.6.21-rc5 :
--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.
config BLK_DEV_RAM_BLOCKSIZE
---
regards,
Patrick
[-- Attachment #2: drivers_block_amount-of-ram-disks_typo_fix2 --]
[-- Type: text/plain, Size: 802 bytes --]
--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.
config BLK_DEV_RAM_BLOCKSIZE
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH UPDATED] fix typo in drivers/block/Kconfig
@ 2007-03-25 1:39 Patrick Ringl
0 siblings, 0 replies; 2+ messages in thread
From: Patrick Ringl @ 2007-03-25 1:39 UTC (permalink / raw)
To: linux-kernel; +Cc: torvalds, axboe
[-- Attachment #1: Type: text/plain, Size: 927 bytes --]
Hello,
[ ... Fixed two minor typos. ...]
The following patch is against 2.6.21-rc4:
--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.
config BLK_DEV_RAM_BLOCKSIZE
---
regards,
Patrick
[-- Attachment #2: drivers_block_amount-of-ram-disks_typo_fix2 --]
[-- Type: text/plain, Size: 801 bytes --]
--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.
config BLK_DEV_RAM_BLOCKSIZE
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-27 19:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-27 19:31 [PATCH UPDATED] fix typo in drivers/block/Kconfig Patrick Ringl
-- strict thread matches above, loose matches on Subject: below --
2007-03-25 1:39 Patrick Ringl
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.