From: "Patel, Gaurav" <gspatel@hp.com> To: Ming Lei <ming.lei@canonical.com> Cc: Robert Hancock <hancockrwd@gmail.com>, "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>, Tejun Heo <tj@kernel.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Subject: RE: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller Date: Thu, 11 Sep 2014 01:05:49 +0000 [thread overview] Message-ID: <4693A34300ED74418DB0F7454C3D19DA16A999C1@G5W2736.americas.hpqcorp.net> (raw) In-Reply-To: <CACVXFVN9KUzMQQcUGGFfg5TG2EK3B+GO2ciuC5pQb4NHaa8h_w@mail.gmail.com> Got it. I just followed your step but it did not work. I will try something else to get 3.16 install on redhat. Thanks, Gaurav Patel Email: Gspatel@hp.com Cell # 832-382-5550 -----Original Message----- From: Ming Lei [mailto:ming.lei@canonical.com] Sent: Wednesday, September 10, 2014 8:00 PM To: Patel, Gaurav Cc: Robert Hancock; linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel Mailing List Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller On Thu, Sep 11, 2014 at 8:45 AM, Patel, Gaurav <gspatel@hp.com> wrote: > I will try to update kernel on Ubuntu to 2.6.32 and run the test. > > I was not able to install 3.16 ubuntu kernel on RrdHat. I didn't ask you to install 3.16 ubuntu kernel on Redhat, and you just need to install upstream 3.16 kernel, :-) > > Thanks, > Gaurav Patel > Email: Gspatel@hp.com > Cell # 832-382-5550 > > -----Original Message----- > From: Ming Lei [mailto:ming.lei@canonical.com] > Sent: Wednesday, September 10, 2014 6:01 PM > To: Patel, Gaurav > Cc: Robert Hancock; linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel > Mailing List > Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata > controller > > On Thu, Sep 11, 2014 at 12:11 AM, Patel, Gaurav <gspatel@hp.com> wrote: >> >> ">> When we use hdparm to download firmware on system with Marvell >>>> 88SE9125 SATA controller, it returns failure always and it has been >>>> observed in several systems:" >> >> [Gaurav]: So I have another moonshot cartridge with same SATA controller and I was able to update FW with hdparm with RedHat65 without any issues. So this looks to me issue with Ubuntu kernel dos not have correct driver (or something is missing to support hdparm or sata controller). > > But RedHat65 ships a 2.6.32 kernel as you said, and you can test the > stable > 2.6.32 kernel on one ubuntu release too. > > As far as I can tell, the problem is very probably related with kernel, that is why I suggest you to test upstream kernel and run 'git bisect' later to find the commit which caused the regression. > > But looks you have simply install problem. > > Thanks, > > >> >> Thanks, >> Gaurav Patel >> Email: Gspatel@hp.com >> Cell # 832-382-5550 >> >> >> -----Original Message----- >> From: Ming Lei [mailto:ming.lei@canonical.com] >> Sent: Wednesday, September 10, 2014 1:34 AM >> To: Robert Hancock >> Cc: linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel Mailing List; >> Patel, Gaurav >> Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata >> controller >> >> On Wed, Sep 10, 2014 at 11:38 AM, Robert Hancock <hancockrwd@gmail.com> wrote: >>> On 01/09/14 02:22 AM, Ming Lei wrote: >>>> >>>> Hi Guys, >>>> >>>> When we use hdparm to download firmware on system with Marvell >>>> 88SE9125 SATA controller, it returns failure always and it has been >>>> observed in several systems: >>>> >>>> #hdparm --fwdownload-mode7 fw.bin >>>> --yes-i-kno-what-i-am-doing --please-destroy-my-drive /dev/sda >>>> >>>> /dev/sda: >>>> fwdownload: xfer_mode=7 min=1 max=65535 size=699392 >>>> FAILED: Input/output error >>> >>> >>> Any errors in dmesg after doing this? >> >> No any failure log from kernel. >> >> Thanks,
WARNING: multiple messages have this Message-ID (diff)
From: "Patel, Gaurav" <gspatel@hp.com> To: Ming Lei <ming.lei@canonical.com> Cc: Robert Hancock <hancockrwd@gmail.com>, "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>, Tejun Heo <tj@kernel.org>, "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org> Subject: RE: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller Date: Thu, 11 Sep 2014 01:05:49 +0000 [thread overview] Message-ID: <4693A34300ED74418DB0F7454C3D19DA16A999C1@G5W2736.americas.hpqcorp.net> (raw) In-Reply-To: <CACVXFVN9KUzMQQcUGGFfg5TG2EK3B+GO2ciuC5pQb4NHaa8h_w@mail.gmail.com> [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain; charset="utf-8", Size: 3344 bytes --] Got it. I just followed your step but it did not work. I will try something else to get 3.16 install on redhat. Thanks, Gaurav Patel Email: Gspatel@hp.com Cell # 832-382-5550 -----Original Message----- From: Ming Lei [mailto:ming.lei@canonical.com] Sent: Wednesday, September 10, 2014 8:00 PM To: Patel, Gaurav Cc: Robert Hancock; linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel Mailing List Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller On Thu, Sep 11, 2014 at 8:45 AM, Patel, Gaurav <gspatel@hp.com> wrote: > I will try to update kernel on Ubuntu to 2.6.32 and run the test. > > I was not able to install 3.16 ubuntu kernel on RrdHat. I didn't ask you to install 3.16 ubuntu kernel on Redhat, and you just need to install upstream 3.16 kernel, :-) > > Thanks, > Gaurav Patel > Email: Gspatel@hp.com > Cell # 832-382-5550 > > -----Original Message----- > From: Ming Lei [mailto:ming.lei@canonical.com] > Sent: Wednesday, September 10, 2014 6:01 PM > To: Patel, Gaurav > Cc: Robert Hancock; linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel > Mailing List > Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata > controller > > On Thu, Sep 11, 2014 at 12:11 AM, Patel, Gaurav <gspatel@hp.com> wrote: >> >> ">> When we use hdparm to download firmware on system with Marvell >>>> 88SE9125 SATA controller, it returns failure always and it has been >>>> observed in several systems:" >> >> [Gaurav]: So I have another moonshot cartridge with same SATA controller and I was able to update FW with hdparm with RedHat65 without any issues. So this looks to me issue with Ubuntu kernel dos not have correct driver (or something is missing to support hdparm or sata controller). > > But RedHat65 ships a 2.6.32 kernel as you said, and you can test the > stable > 2.6.32 kernel on one ubuntu release too. > > As far as I can tell, the problem is very probably related with kernel, that is why I suggest you to test upstream kernel and run 'git bisect' later to find the commit which caused the regression. > > But looks you have simply install problem. > > Thanks, > > >> >> Thanks, >> Gaurav Patel >> Email: Gspatel@hp.com >> Cell # 832-382-5550 >> >> >> -----Original Message----- >> From: Ming Lei [mailto:ming.lei@canonical.com] >> Sent: Wednesday, September 10, 2014 1:34 AM >> To: Robert Hancock >> Cc: linux-ide@vger.kernel.org; Tejun Heo; Linux Kernel Mailing List; >> Patel, Gaurav >> Subject: Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata >> controller >> >> On Wed, Sep 10, 2014 at 11:38 AM, Robert Hancock <hancockrwd@gmail.com> wrote: >>> On 01/09/14 02:22 AM, Ming Lei wrote: >>>> >>>> Hi Guys, >>>> >>>> When we use hdparm to download firmware on system with Marvell >>>> 88SE9125 SATA controller, it returns failure always and it has been >>>> observed in several systems: >>>> >>>> #hdparm --fwdownload-mode7 fw.bin >>>> --yes-i-kno-what-i-am-doing --please-destroy-my-drive /dev/sda >>>> >>>> /dev/sda: >>>> fwdownload: xfer_mode=7 min=1 max=65535 size=699392 >>>> FAILED: Input/output error >>> >>> >>> Any errors in dmesg after doing this? >> >> No any failure log from kernel. >> >> Thanks, ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next prev parent reply other threads:[~2014-09-11 1:05 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-01 8:22 [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller Ming Lei 2014-09-10 3:38 ` Robert Hancock 2014-09-10 6:34 ` Ming Lei 2014-09-10 16:11 ` Patel, Gaurav 2014-09-10 16:11 ` Patel, Gaurav 2014-09-10 23:00 ` Ming Lei 2014-09-11 0:45 ` Patel, Gaurav 2014-09-11 0:45 ` Patel, Gaurav 2014-09-11 0:59 ` Ming Lei 2014-09-11 1:05 ` Patel, Gaurav [this message] 2014-09-11 1:05 ` Patel, Gaurav
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4693A34300ED74418DB0F7454C3D19DA16A999C1@G5W2736.americas.hpqcorp.net \ --to=gspatel@hp.com \ --cc=hancockrwd@gmail.com \ --cc=linux-ide@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=ming.lei@canonical.com \ --cc=tj@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.