* tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
@ 2010-02-11 1:45 Ashish Bijlani
2010-02-11 7:45 ` [PATCH] blktap2: disable presently broken memshr extension Daniel Stodden
2010-02-11 7:56 ` tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Daniel Stodden
0 siblings, 2 replies; 7+ messages in thread
From: Ashish Bijlani @ 2010-02-11 1:45 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 829 bytes --]
Hi,
I'm trying to run guest pv vm on my machine running xen-unstable
(xen-4.0.0-rc3.pre + linux-2.6-pvops). However, I get blktap error:
"
sudo xm create -c xmexample
Using config file "./xmexample".
Error: Failed to create device.
stdout: unrecognized child response
stderr:
Check that target "/home/ashish/xen/hd.img" exists and that blktap2
driver installed in dom0.
"
Dom0 dmesg shows:
"
[ 7112.648271] blktap_sysfs_create: adding attributes for dev eb5506c0
[ 7112.648287] blktap_control_allocate_tap: allocated tap de87e000
[ 7112.651564] tapdisk2[7325]: segfault at 10 ip b763a540 sp bffd548c
error 4 in libpthread-2.7.so[b7633000+14000]
"
tapdisk2 -n aio:/home/ashish/xen/hd.img output shows the same above segfault msg
Any ideas what could be wrong?
config, xmexample, and dmesg attached.
Thanks,
Ashish
[-- Attachment #2: xmexample --]
[-- Type: application/octet-stream, Size: 7567 bytes --]
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/home/ashish/xen/vmlinuz-2.6.31.6"
# Optional ramdisk.
#ramdisk = "/boot/initrd.gz"
# The domain build function. Default is 'linux'.
#builder='linux'
# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
# memory errors. The domain needs enough memory to boot kernel
# and modules. Allocating less than 32MBs is not recommended.
memory = 64
# A name for your domain. All domains must have different names.
name = "vm"
# 128-bit UUID for the domain. The default behavior is to generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # all vcpus run on cpus 0,2,3,5
#cpus = ["2", "3"] # VCPU0 runs on CPU2, VCPU1 runs on CPU3
# Number of Virtual CPUS to use, default is 1
#vcpus = 1
#----------------------------------------------------------------------------
# Define network interfaces.
# By default, no network interfaces are configured. You may have one created
# with sensible defaults using an empty vif clause:
#
# vif = [ '' ]
#
# or optionally override backend, bridge, ip, mac, script, type, or vifname:
#
# vif = [ 'mac=00:16:3e:00:00:11, bridge=xenbr0' ]
#
# or more than one interface may be configured:
#
# vif = [ '', 'bridge=xenbr1' ]
vif = [ '' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
disk = [ 'tap:aio:/home/ashish/xen/hd.img,xvda1,w' ]
#disk = [ 'file:/sdcard/remus.vm,xvda1,w' ]
#----------------------------------------------------------------------------
# Define frame buffer device.
#
# By default, no frame buffer device is configured.
#
# To create one using the SDL backend and sensible defaults:
#
# vfb = [ 'sdl=1' ]
#
# This uses environment variables XAUTHORITY and DISPLAY. You
# can override that:
#
#vfb = [ 'sdl=1,xauthority=/home/ashish/.Xauthority,display=:1' ]
#
# To create one using the VNC backend and sensible defaults:
#
#vfb = [ 'vnc=1' ]
#
# The backend listens on 127.0.0.1 port 5900+N by default, where N is
# the domain ID. You can override both address and N:
#
# vfb = [ 'vnc=1,vnclisten=127.0.0.1,vncdisplay=1' ]
#
# Or you can bind the first unused port above 5900:
#
#vfb = [ 'vnc=1,vnclisten=0.0.0.0,vncunused=1' ]
#
# You can override the password:
#
#vfb = [ 'vnc=1,vncpasswd=' ]
#
# Empty password disables authentication. Defaults to the vncpasswd
# configured in xend-config.sxp.
#----------------------------------------------------------------------------
# Define to which TPM instance the user domain should communicate.
# The vtpm entry is of the form 'instance=INSTANCE,backend=DOM'
# where INSTANCE indicates the instance number of the TPM the VM
# should be talking to and DOM provides the domain where the backend
# is located.
# Note that no two virtual machines should try to connect to the same
# TPM instance. The handling of all TPM instances does require
# some management effort in so far that VM configration files (and thus
# a VM) should be associated with a TPM instance throughout the lifetime
# of the VM / VM configuration file. The instance number must be
# greater or equal to 1.
#vtpm = [ 'instance=1,backend=0' ]
#----------------------------------------------------------------------------
# Set the kernel command line for the new domain.
# You only need to define the IP parameters and hostname if the domain's
# IP config doesn't, e.g. in ifcfg-eth0 or via DHCP.
# You can use 'extra' to set the runlevel and custom environment
# variables used by custom rc scripts (e.g. VMID=, usr= ).
# Set if you want dhcp to allocate the IP address.
#dhcp="dhcp"
# Set netmask.
#netmask=
# Set default gateway.
#gateway=
# Set the hostname.
#hostname= "vm%d" % vmid
# Set root device.
root = "/dev/xvda1 "
# Root device for nfs.
#root = "/dev/nfs"
# The nfs server.
#nfs_server = '192.0.2.1'
# Root directory on the nfs server.
#nfs_root = '/full/path/to/root/directory'
# Sets runlevel 4.
#extra = "4"
#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits. There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each of these you
# may specify:
#
# "destroy", meaning that the domain is cleaned up as normal;
# "restart", meaning that a new domain is started in place of the old
# one;
# "preserve", meaning that no clean-up is done until the domain is
# manually destroyed (using xm destroy, for example); or
# "rename-restart", meaning that the old domain is not cleaned up, but is
# renamed and a new domain started in its place.
#
# In the event a domain stops due to a crash, you have the additional options:
#
# "coredump-destroy", meaning dump the crashed domain's core and then destroy;
# "coredump-restart', meaning dump the crashed domain's core and the restart.
#
# The default is
#
# on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'destroy'
#
# restart = 'always' means on_poweroff = 'restart'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# restart = 'never' means on_poweroff = 'destroy'
# on_reboot = 'destroy'
# on_crash = 'destroy'
#on_poweroff = 'destroy'
#on_reboot = 'restart'
#on_crash = 'restart'
#-----------------------------------------------------------------------------
# Configure PVSCSI devices:
#
#vscsi=[ 'PDEV, VDEV' ]
#
# PDEV gives physical SCSI device to be attached to specified guest
# domain by one of the following identifier format.
# - XX:XX:XX:XX (4-tuples with decimal notation which shows
# "host:channel:target:lun")
# - /dev/sdxx or sdx
# - /dev/stxx or stx
# - /dev/sgxx or sgx
# - result of 'scsi_id -gu -s'.
# ex. # scsi_id -gu -s /block/sdb
# 36000b5d0006a0000006a0257004c0000
#
# VDEV gives virtual SCSI device by 4-tuples (XX:XX:XX:XX) as
# which the specified guest domain recognize.
#
#vscsi = [ '/dev/sdx, 0:0:0:0' ]
#============================================================================
[-- Attachment #3: config-2.6.31.6 --]
[-- Type: application/octet-stream, Size: 69278 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31.6
# Wed Feb 10 01:24:07 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_EVENT_PROFILE=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_DOM0_PCI=y
CONFIG_MICROCODE_XEN=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_OLD_MCE is not set
CONFIG_X86_NEW_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_IMQ=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_IMQ=m
# CONFIG_IMQ_BEHAVIOR_AA is not set
CONFIG_IMQ_BEHAVIOR_AB=y
# CONFIG_IMQ_BEHAVIOR_BA is not set
# CONFIG_IMQ_BEHAVIOR_BB is not set
CONFIG_IMQ_NUM_DEVS=16
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETCHANNEL2 is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_BLKDEV_TAP=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
# CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_S3=y
CONFIG_ACPI_PROCESSOR_XEN=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_TRACE is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #4: dmesg --]
[-- Type: application/octet-stream, Size: 68756 bytes --]
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@Triumph) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #3 SMP Wed Feb 10 13:49:14 EST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] xen_release_chunk: looking at area pfn 3a475-3f690
[ 0.000000] xen_release_chunk: looking at area pfn 40000-e0000
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fec00
[ 0.000000] xen_release_chunk: looking at area pfn fec10-fed14
[ 0.000000] xen_release_chunk: looking at area pfn fed1a-fed1c
[ 0.000000] xen_release_chunk: looking at area pfn fed90-fee00
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ff000
[ 0.000000] xen_release_chunk: looking at area pfn 0-3a475
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] Xen: 000000000009f400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000003a475000 (usable)
[ 0.000000] Xen: 000000003f690000 - 000000003f69a000 (ACPI data)
[ 0.000000] Xen: 000000003f69a000 - 000000003f700000 (ACPI NVS)
[ 0.000000] Xen: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3a475 max_arch_pfn = 0x1000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003a475000 (usable)
[ 0.000000] modified: 000000003f690000 - 000000003f69a000 (ACPI data)
[ 0.000000] modified: 000000003f69a000 - 000000003f700000 (ACPI NVS)
[ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 02bff000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002d1fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 002d1fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2d1fe000 @ 100000-26d000
[ 0.000000] RAMDISK: 019e8000 - 021e5200
[ 0.000000] ACPI: RSDP 000f7260 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 3f6931bf 00044 (v01 SONY J3 20060921 PTL 00000000)
[ 0.000000] ACPI: FACP 3f699e10 00084 (v02 SONY J3 20060921 PTL 0000005A)
[ 0.000000] ACPI: DSDT 3f6949b7 05459 (v01 SONY J3 20060921 PTL 20050228)
[ 0.000000] ACPI: FACS 3f69afc0 00040
[ 0.000000] ACPI: APIC 3f699e94 00068 (v01 SONY J3 20060921 PTL 0000005A)
[ 0.000000] ACPI: BOOT 3f699fd8 00028 (v01 SONY J3 20060921 PTL 00000001)
[ 0.000000] ACPI: MCFG 3f699f34 0003C (v01 SONY J3 20060921 PTL 0000005A)
[ 0.000000] ACPI: APIC 3f699f70 00068 (v01 SONY J3 20060921 PTL 00000000)
[ 0.000000] ACPI: SSDT 3f694227 0078C (v01 SONY J3 20060921 PTL 20050228)
[ 0.000000] ACPI: SSDT 3f693b8b 0069C (v01 SONY J3 20060921 PTL 20050228)
[ 0.000000] ACPI: SSDT 3f693203 00500 (v01 SONY J3 20060921 PTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 210MB HIGHMEM available.
[ 0.000000] 721MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2d1fe000
[ 0.000000] low ram: 0 - 2d1fe000
[ 0.000000] node 0 low ram: 00000000 - 2d1fe000
[ 0.000000] node 0 bootmap 00010000 - 00015a40
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 002d1fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00022d1000 - 00022e8000] XEN PAGETABLES ==> [00022d1000 - 00022e8000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00018c2790] TEXT DATA BSS ==> [0001000000 - 00018c2790]
[ 0.000000] #5 [00019e8000 - 00021e5200] RAMDISK ==> [00019e8000 - 00021e5200]
[ 0.000000] #6 [00021e6000 - 00022d1000] XEN START INFO ==> [00021e6000 - 00022d1000]
[ 0.000000] #7 [00018c3000 - 00018c31e8] BRK ==> [00018c3000 - 00018c31e8]
[ 0.000000] #8 [0000100000 - 0000254000] PGTABLE ==> [0000100000 - 0000254000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f7330] f7330
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002d1fe
[ 0.000000] HighMem 0x0002d1fe -> 0x0003a475
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003a475
[ 0.000000] On node 0 totalpages: 238596
[ 0.000000] free_area_init_node: node 0, pgdat c1780580, node_mem_map c22e8200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1412 pages used for memmap
[ 0.000000] Normal zone: 179322 pages, LIFO batch:31
[ 0.000000] HighMem zone: 421 pages used for memmap
[ 0.000000] HighMem zone: 53458 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: Unable to change apic_id!
[ 0.000000] IOAPIC[0]: apic_id 255, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 9 4k pages, static data 36860 bytes
[ 0.000000] trying to map vcpu_info 0 at ed9ff028, mfn 3b9c1, offset 40
[ 0.000000] cpu 0 using vcpu_info at ed9ff028
[ 0.000000] trying to map vcpu_info 1 at eda0f028, mfn 3b9b8, offset 40
[ 0.000000] cpu 1 using vcpu_info at eda0f028
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 236731
[ 0.000000] Kernel command line: root=UUID=d5a5df5d-6210-4481-98da-791cf606c478
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] xen_swiotlb_fixup: buf=c2b17000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c6b77000 size=32768
[ 0.000000] Placing 64MB Xen software IO TLB between c2b17000 - c6b17000
[ 0.000000] Xen software IO TLB at phys 0x2b17000 - 0x6b17000
[ 0.000000] Initializing HighMem for node 0 (0002d1fe:0003a475)
[ 0.000000] Memory: 859856k/954836k available (4820k kernel code, 93904k reserved, 2906k data, 408k init, 215516k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf571e000 - 0xf57ff000 ( 900 kB)
[ 0.000000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB)
[ 0.000000] vmalloc : 0xed9fe000 - 0xf51fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xed1fe000 ( 721 MB)
[ 0.000000] .init : 0xc178c000 - 0xc17f2000 ( 408 kB)
[ 0.000000] .data : 0xc14b5077 - 0xc178b8e0 (2906 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14b5077 (4820 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] xen: registering gsi 0 triggering 1 polarity 0
[ 0.000000] xen: --> irq=0
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 1 triggering 1 polarity 0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 3 triggering 1 polarity 0
[ 0.000000] xen: --> irq=3
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 4 triggering 1 polarity 0
[ 0.000000] xen: --> irq=4
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 5 triggering 1 polarity 0
[ 0.000000] xen: --> irq=5
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 6 triggering 1 polarity 0
[ 0.000000] xen: --> irq=6
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 7 triggering 1 polarity 0
[ 0.000000] xen: --> irq=7
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 8 triggering 1 polarity 0
[ 0.000000] xen: --> irq=8
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> irq=9
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen: registering gsi 10 triggering 1 polarity 0
[ 0.000000] xen: --> irq=10
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 11 triggering 1 polarity 0
[ 0.000000] xen: --> irq=11
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 12 triggering 1 polarity 0
[ 0.000000] xen: --> irq=12
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 13 triggering 1 polarity 0
[ 0.000000] xen: --> irq=13
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 14 triggering 1 polarity 0
[ 0.000000] xen: --> irq=14
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 15 triggering 1 polarity 0
[ 0.000000] xen: --> irq=15
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 1828.821 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Xen: using vcpuop timer interface
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] alloc irq_desc for 423 on node 0
[ 0.000999] alloc kstat_irqs on node 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.64 BogoMIPS (lpj=1828821)
[ 0.001019] Security Framework initialized
[ 0.001101] SELinux: Initializing.
[ 0.001187] SELinux: Starting in permissive mode
[ 0.001213] Mount-cache hash table entries: 512
[ 0.001582] Initializing cgroup subsys ns
[ 0.001666] Initializing cgroup subsys cpuacct
[ 0.001748] Initializing cgroup subsys freezer
[ 0.001872] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001983] CPU: L2 cache: 2048K
[ 0.002010] CPU: Physical Processor ID: 0
[ 0.002088] CPU: Processor Core ID: 0
[ 0.002170] mce: CPU supports 6 MCE banks
[ 0.002277] Performance Counters: unsupported p6 CPU model 15 no PMU driver, software counters only.
[ 0.003690] SMP alternatives: switching to UP code
[ 0.003999] ACPI: Core revision 20090521
[ 0.023139] alloc irq_desc for 422 on node 0
[ 0.023146] alloc kstat_irqs on node 0
[ 0.023162] alloc irq_desc for 421 on node 0
[ 0.023167] alloc kstat_irqs on node 0
[ 0.023181] alloc irq_desc for 420 on node 0
[ 0.023186] alloc kstat_irqs on node 0
[ 0.023197] alloc irq_desc for 419 on node 0
[ 0.023202] alloc kstat_irqs on node 0
[ 0.023484] installing Xen timer for CPU 1
[ 0.023569] alloc irq_desc for 418 on node 0
[ 0.023574] alloc kstat_irqs on node 0
[ 0.023620] SMP alternatives: switching to SMP code
[ 0.023996] alloc irq_desc for 417 on node 0
[ 0.023996] alloc kstat_irqs on node 0
[ 0.024011] alloc irq_desc for 416 on node 0
[ 0.024016] alloc kstat_irqs on node 0
[ 0.024030] alloc irq_desc for 415 on node 0
[ 0.024035] alloc kstat_irqs on node 0
[ 0.024047] alloc irq_desc for 414 on node 0
[ 0.024052] alloc kstat_irqs on node 0
[ 0.000010] Initializing CPU#1
[ 0.000064] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000071] CPU: L2 cache: 2048K
[ 0.000077] CPU: Physical Processor ID: 0
[ 0.000081] CPU: Processor Core ID: 1
[ 0.000088] mce: CPU supports 6 MCE banks
[ 0.024209] Brought up 2 CPUs
[ 0.025537] Booting paravirtualized kernel on Xen
[ 0.025537] Xen version: 4.0.0-rc3-pre (preserve-AD) (dom0)
[ 0.026050] Grant tables using version 2 layout.
[ 0.026216] Grant table initialized
[ 0.026337] Time: 18:37:07 Date: 02/10/10
[ 0.026500] NET: Registered protocol family 16
[ 0.027089] alloc irq_desc for 413 on node 0
[ 0.027089] alloc kstat_irqs on node 0
[ 0.027089] xenbus_probe_init ok
[ 0.028084] ACPI: bus type pci registered
[ 0.028175] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.028175] PCI: MCFG area at e0000000 reserved in E820
[ 0.028223] PCI: Using MMCONFIG for extended config space
[ 0.028303] PCI: Using configuration type 1 for base access
[ 0.054363] bio: create slab <bio-0> at 0
[ 0.059342] ACPI: EC: Look up EC in DSDT
[ 0.071034] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.084408] ACPI: Interpreter enabled
[ 0.084523] ACPI: (supports S0 S3 S4 S5)
[ 0.084800] ACPI: Using IOAPIC for interrupt routing
[ 0.109200] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.109287] ACPI: EC: driver started in interrupt mode
[ 0.116329] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.117793] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.118264] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0100000-0xd017ffff]
[ 0.118282] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.118299] pci 0000:00:02.0: reg 18 32bit mmio: [0xb0000000-0xbfffffff]
[ 0.118317] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0180000-0xd01bffff]
[ 0.118491] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
[ 0.118841] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd01c0000-0xd01c3fff]
[ 0.118981] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.118981] pci 0000:00:1b.0: PME# disabled
[ 0.118981] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.118981] pci 0000:00:1c.0: PME# disabled
[ 0.118981] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.118981] pci 0000:00:1c.1: PME# disabled
[ 0.119176] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.119265] pci 0000:00:1c.2: PME# disabled
[ 0.119565] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.119654] pci 0000:00:1c.3: PME# disabled
[ 0.119891] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.119981] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.119981] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.119981] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.119981] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd03c4000-0xd03c43ff]
[ 0.119981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.119981] pci 0000:00:1d.7: PME# disabled
[ 0.119981] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.119981] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.119981] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.119981] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.119981] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.119981] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.119981] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.119981] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.119981] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
[ 0.119981] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
[ 0.119981] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[ 0.119981] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
[ 0.119981] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.119981] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd03c4400-0xd03c47ff]
[ 0.119981] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119981] pci 0000:00:1f.2: PME# disabled
[ 0.119981] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.119981] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.119981] pci 0000:00:1c.0: bridge 32bit mmio: [0xc8000000-0xc9ffffff]
[ 0.119981] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xc0000000-0xc1ffffff]
[ 0.119981] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.119981] pci 0000:00:1c.1: bridge 32bit mmio: [0xca000000-0xcbffffff]
[ 0.119981] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xc2000000-0xc3ffffff]
[ 0.119981] pci 0000:06:00.0: reg 10 32bit mmio: [0xcc000000-0xcc000fff]
[ 0.119981] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.119981] pci 0000:06:00.0: PME# disabled
[ 0.119981] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.119981] pci 0000:00:1c.2: bridge 32bit mmio: [0xcc000000-0xcdffffff]
[ 0.119981] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc4000000-0xc5ffffff]
[ 0.119981] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
[ 0.119981] pci 0000:00:1c.3: bridge 32bit mmio: [0xce000000-0xcfffffff]
[ 0.119981] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc6000000-0xc7ffffff]
[ 0.119981] pci 0000:0a:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.119981] pci 0000:0a:03.0: supports D1 D2
[ 0.119981] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119981] pci 0000:0a:03.0: PME# disabled
[ 0.119981] pci 0000:0a:03.1: reg 10 32bit mmio: [0xd0006000-0xd00067ff]
[ 0.119981] pci 0000:0a:03.1: reg 14 32bit mmio: [0xd0000000-0xd0003fff]
[ 0.119981] pci 0000:0a:03.1: supports D1 D2
[ 0.119981] pci 0000:0a:03.1: PME# supported from D0 D1 D2 D3hot
[ 0.119981] pci 0000:0a:03.1: PME# disabled
[ 0.119981] pci 0000:0a:03.2: reg 10 32bit mmio: [0xd0004000-0xd0004fff]
[ 0.119981] pci 0000:0a:03.2: supports D1 D2
[ 0.119981] pci 0000:0a:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.119981] pci 0000:0a:03.2: PME# disabled
[ 0.120071] pci 0000:0a:08.0: reg 10 32bit mmio: [0xd0005000-0xd0005fff]
[ 0.120092] pci 0000:0a:08.0: reg 14 io port: [0x6000-0x603f]
[ 0.120224] pci 0000:0a:08.0: supports D1 D2
[ 0.120230] pci 0000:0a:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120321] pci 0000:0a:08.0: PME# disabled
[ 0.120507] pci 0000:00:1e.0: transparent bridge
[ 0.120594] pci 0000:00:1e.0: bridge io port: [0x6000-0x6fff]
[ 0.120608] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xd00fffff]
[ 0.120759] pci_bus 0000:00: on NUMA node 0
[ 0.120770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.121565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.121834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.122090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.122362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.122727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.147180] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.147840] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.147977] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.147977] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.147977] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.147977] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.147977] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 0.147977] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.148055] sync cpu 0 get result 1 max_id 1
[ 0.148059] sync cpu 1 get result 1 max_id 1
[ 0.148059] alloc irq_desc for 412 on node 0
[ 0.148059] alloc kstat_irqs on node 0
[ 0.148092] xenbus_probe_backend_init bus registered ok
[ 0.148140] xenbus_probe_frontend_init bus registered ok
[ 0.148140] xen_balloon: Initialising balloon driver with page order 0.
[ 0.149252] SCSI subsystem initialized
[ 0.150085] libata version 3.00 loaded.
[ 0.150085] usbcore: registered new interface driver usbfs
[ 0.151012] usbcore: registered new interface driver hub
[ 0.151115] usbcore: registered new device driver usb
[ 0.152061] PCI: Using ACPI for IRQ routing
[ 0.152348] IO APIC resources couldn't be allocated.
[ 0.171141] cfg80211: Using static regulatory domain info
[ 0.171141] cfg80211: Regulatory domain: US
[ 0.171221] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.171369] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.171452] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.171535] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.171619] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.171702] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.171786] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.171985] cfg80211: Calling CRDA for country: US
[ 0.172119] NetLabel: Initializing
[ 0.172119] NetLabel: domain hash size = 128
[ 0.172157] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.172264] NetLabel: unlabeled traffic allowed by default
[ 0.172987] Switched to high resolution mode on CPU 0
[ 0.173892] Switched to high resolution mode on CPU 1
[ 0.179256] pnp: PnP ACPI init
[ 0.179383] ACPI: bus type pnp registered
[ 0.189689] xen: registering gsi 13 triggering 1 polarity 0
[ 0.189695] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.189777] xen: --> irq=13
[ 0.189782] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.190757] xen: registering gsi 1 triggering 1 polarity 0
[ 0.190763] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.190845] xen: --> irq=1
[ 0.190851] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.191204] xen: registering gsi 12 triggering 1 polarity 0
[ 0.191210] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.191290] xen: --> irq=12
[ 0.191296] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.191710] pnp: PnP ACPI: found 9 devices
[ 0.191789] ACPI: ACPI bus type pnp unregistered
[ 0.191882] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.191970] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.192058] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.192143] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.192230] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.192315] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.192400] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.192509] system 00:05: ioport range 0x680-0x6ff has been reserved
[ 0.192595] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.192681] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.192768] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.192853] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.192939] system 00:05: ioport range 0xfe00-0xfe7f has been reserved
[ 0.193023] system 00:05: ioport range 0xfe80-0xfeff has been reserved
[ 0.202146] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.202408] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.202495] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.202588] pci 0000:00:1c.0: MEM window: 0xc8000000-0xc9ffffff
[ 0.202678] pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c1ffffff
[ 0.202817] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.202904] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.202996] pci 0000:00:1c.1: MEM window: 0xca000000-0xcbffffff
[ 0.203004] pci 0000:00:1c.1: PREFETCH window: 0x000000c2000000-0x000000c3ffffff
[ 0.203004] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.203004] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.203004] pci 0000:00:1c.2: MEM window: 0xcc000000-0xcdffffff
[ 0.203004] pci 0000:00:1c.2: PREFETCH window: 0x000000c4000000-0x000000c5ffffff
[ 0.203004] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.203004] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.203004] pci 0000:00:1c.3: MEM window: 0xce000000-0xcfffffff
[ 0.203004] pci 0000:00:1c.3: PREFETCH window: 0x000000c6000000-0x000000c7ffffff
[ 0.203004] pci 0000:0a:03.0: CardBus bridge, secondary bus 0000:0b
[ 0.203004] pci 0000:0a:03.0: IO window: 0x006400-0x0064ff
[ 0.203004] pci 0000:0a:03.0: IO window: 0x006800-0x0068ff
[ 0.203004] pci 0000:0a:03.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.203004] pci 0000:0a:03.0: MEM window: 0x48000000-0x4bffffff
[ 0.203004] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.203004] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 0.203004] pci 0000:00:1e.0: MEM window: 0xd0000000-0xd00fffff
[ 0.203004] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.203004] xen: registering gsi 17 triggering 0 polarity 1
[ 0.203004] alloc irq_desc for 17 on node 0
[ 0.203004] alloc kstat_irqs on node 0
[ 0.204872] xen: --> irq=17
[ 0.204878] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1
[ 0.205013] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.205104] pci 0000:00:1c.0: setting latency timer to 64
[ 0.205123] xen: registering gsi 16 triggering 0 polarity 1
[ 0.205130] alloc irq_desc for 16 on node 0
[ 0.205135] alloc kstat_irqs on node 0
[ 0.205151] xen: --> irq=16
[ 0.205157] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.205288] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.205379] pci 0000:00:1c.1: setting latency timer to 64
[ 0.205402] xen: registering gsi 18 triggering 0 polarity 1
[ 0.205409] alloc irq_desc for 18 on node 0
[ 0.205414] alloc kstat_irqs on node 0
[ 0.205422] xen: --> irq=18
[ 0.205427] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.205559] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.205651] pci 0000:00:1c.2: setting latency timer to 64
[ 0.205673] xen: registering gsi 21 triggering 0 polarity 1
[ 0.205680] alloc irq_desc for 21 on node 0
[ 0.205686] alloc kstat_irqs on node 0
[ 0.205693] xen: --> irq=21
[ 0.205699] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1
[ 0.205831] pci 0000:00:1c.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.205922] pci 0000:00:1c.3: setting latency timer to 64
[ 0.205937] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.206030] pci 0000:00:1e.0: setting latency timer to 64
[ 0.206050] pci 0000:0a:03.0: enabling device (0000 -> 0003)
[ 0.206143] xen: registering gsi 16 triggering 0 polarity 1
[ 0.206143] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.206143] xen: --> irq=16
[ 0.206143] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.206143] pci 0000:0a:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.206143] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.206143] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.206143] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.206143] pci_bus 0000:02: resource 1 mem: [0xc8000000-0xc9ffffff]
[ 0.206143] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc1ffffff]
[ 0.206143] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.206143] pci_bus 0000:04: resource 1 mem: [0xca000000-0xcbffffff]
[ 0.206143] pci_bus 0000:04: resource 2 pref mem [0xc2000000-0xc3ffffff]
[ 0.206143] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.206143] pci_bus 0000:06: resource 1 mem: [0xcc000000-0xcdffffff]
[ 0.206143] pci_bus 0000:06: resource 2 pref mem [0xc4000000-0xc5ffffff]
[ 0.206143] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.206143] pci_bus 0000:08: resource 1 mem: [0xce000000-0xcfffffff]
[ 0.206143] pci_bus 0000:08: resource 2 pref mem [0xc6000000-0xc7ffffff]
[ 0.206143] pci_bus 0000:0a: resource 0 io: [0x6000-0x6fff]
[ 0.206143] pci_bus 0000:0a: resource 1 mem: [0xd0000000-0xd00fffff]
[ 0.206143] pci_bus 0000:0a: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.206143] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.206143] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.206143] pci_bus 0000:0b: resource 0 io: [0x6400-0x64ff]
[ 0.206143] pci_bus 0000:0b: resource 1 io: [0x6800-0x68ff]
[ 0.206143] pci_bus 0000:0b: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.206143] pci_bus 0000:0b: resource 3 mem: [0x48000000-0x4bffffff]
[ 0.206143] NET: Registered protocol family 2
[ 0.207617] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.208083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.208722] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.209063] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.209147] TCP reno registered
[ 0.209363] NET: Registered protocol family 1
[ 0.209558] Trying to unpack rootfs image as initramfs...
[ 0.244803] Freeing initrd memory: 8180k freed
[ 0.250601] kvm: no hardware support
[ 0.250699] has_svm: not amd
[ 0.250775] kvm: no hardware support
[ 0.251216] Simple Boot Flag at 0x36 set to 0x1
[ 0.254993] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.255122] Scanning for low memory corruption every 60 seconds
[ 0.256154] audit: initializing netlink socket (disabled)
[ 0.256257] type=2000 audit(1265827027.903:1): initialized
[ 0.267785] highmem bounce pool size: 64 pages
[ 0.267873] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.276367] VFS: Disk quotas dquot_6.5.2
[ 0.276624] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.279345] msgmni has been set to 1275
[ 0.279667] SELinux: Registering netfilter hooks
[ 0.280755] alg: No test for stdrng (krng)
[ 0.281179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.281304] io scheduler noop registered
[ 0.281382] io scheduler anticipatory registered
[ 0.281461] io scheduler deadline registered
[ 0.281710] io scheduler cfq registered (default)
[ 0.281814] pci 0000:00:02.0: Boot video device
[ 0.281846] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.281851] pci 0000:00:1d.0: Performing full reset
[ 0.281885] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.281890] pci 0000:00:1d.1: Performing full reset
[ 0.281924] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.281929] pci 0000:00:1d.2: Performing full reset
[ 0.281961] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.281966] pci 0000:00:1d.3: Performing full reset
[ 0.282598] alloc irq_desc for 411 on node 0
[ 0.282604] alloc kstat_irqs on node 0
[ 0.282674] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.283378] alloc irq_desc for 410 on node 0
[ 0.283383] alloc kstat_irqs on node 0
[ 0.283442] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.284122] alloc irq_desc for 409 on node 0
[ 0.284127] alloc kstat_irqs on node 0
[ 0.284219] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.284958] alloc irq_desc for 408 on node 0
[ 0.284964] alloc kstat_irqs on node 0
[ 0.285038] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.285858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.289671] ACPI: AC Adapter [ADP1] (on-line)
[ 0.290213] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.293093] ACPI: Lid Switch [LID0]
[ 0.293523] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.293656] ACPI: Power Button [PWRB]
[ 0.296374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input2
[ 0.296505] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.297940] ACPI: SSDT 3f69395a 001A8 (v01 SONY J3 20060921 PTL 20050228)
[ 0.299055] ACPI: SSDT 3f693703 001D2 (v01 SONY J3 20060921 PTL 20050228)
[ 0.300748] Marking TSC unstable due to TSC halts in idle
[ 0.300836] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 0.302241] ACPI: SSDT 3f693b02 00089 (v01 SONY J3 20060921 PTL 20050228)
[ 0.303929] ACPI: SSDT 3f6938d5 00085 (v01 SONY J3 20060921 PTL 20050228)
[ 0.304766] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 0.312218] ACPI: Invalid active0 threshold
[ 0.313913] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.314032] ACPI: Thermal Zone [TZ00] (59 C)
[ 0.317543] ACPI: Invalid active0 threshold
[ 0.319372] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.319475] ACPI: Thermal Zone [TZ01] (59 C)
[ 0.319947] Event-channel device installed.
[ 0.329852] blktap_device_init: blktap device major 253
[ 0.329948] blktap_ring_init: blktap ring major: 251
[ 0.332276] registering netback
[ 0.342811] ACPI: Battery Slot [BAT0] (battery present)
[ 0.344857] alloc irq_desc for 407 on node 0
[ 0.344864] alloc kstat_irqs on node 0
[ 0.346433] Non-volatile memory driver v1.3
[ 0.346739] intel_rng: FWH not detected
[ 0.347058] Linux agpgart interface v0.103
[ 0.347297] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.348566] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.352177] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 0.352585] [drm] Initialized drm 1.1.0 20060810
[ 0.352711] xen: registering gsi 16 triggering 0 polarity 1
[ 0.352716] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.352796] xen: --> irq=16
[ 0.352802] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.352935] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353028] pci 0000:00:02.0: setting latency timer to 64
[ 0.357161] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.357344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.364159] brd: module loaded
[ 0.366850] loop: module loaded
[ 0.367217] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.368766] ata_piix 0000:00:1f.1: version 2.13
[ 0.368790] xen: registering gsi 18 triggering 0 polarity 1
[ 0.368796] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.368877] xen: --> irq=18
[ 0.368885] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.369021] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.369173] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.369426] scsi0 : ata_piix
[ 0.369843] scsi1 : ata_piix
[ 0.371709] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.371796] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.371933] xen: registering gsi 19 triggering 0 polarity 1
[ 0.371942] alloc irq_desc for 19 on node 0
[ 0.371948] alloc kstat_irqs on node 0
[ 0.371957] xen: --> irq=19
[ 0.371963] xen_set_ioapic_routing: irq 19 gsi 19 vector 19 ioapic 0 pin 19 triggering 1 polarity 1
[ 0.372116] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.372116] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.372637] ata2: port disabled. ignoring.
[ 0.523081] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.523355] scsi2 : ata_piix
[ 0.524053] scsi3 : ata_piix
[ 0.525946] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33
[ 0.529284] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 0.529422] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 0.531098] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.531208] Copyright (c) 1999-2006 Intel Corporation.
[ 0.531541] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.531656] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.532241] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.532353] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.532622] e100 0000:0a:08.0: enabling device (0000 -> 0003)
[ 0.532747] xen: registering gsi 20 triggering 0 polarity 1
[ 0.532761] alloc irq_desc for 20 on node 0
[ 0.532770] alloc kstat_irqs on node 0
[ 0.532786] xen: --> irq=20
[ 0.532796] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1
[ 0.532931] ata1.00: configured for UDMA/33
[ 0.533081] e100 0000:0a:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.535610] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5
[ 0.560005] e100 0000:0a:08.0: PME# disabled
[ 0.561985] e100: eth0: e100_probe: addr 0xd0005000, irq 20, MAC addr 00:13:a9:46:d7:95
[ 0.562557] sky2 driver version 1.23
[ 0.563470] console [netcon0] enabled
[ 0.563567] netconsole: network logging started
[ 0.563659] Fusion MPT base driver 3.04.10
[ 0.563737] Copyright (c) 1999-2008 LSI Corporation
[ 0.563831] Fusion MPT FC Host driver 3.04.10
[ 0.564110] Fusion MPT misc device (ioctl) driver 3.04.10
[ 0.564332] mptctl: Registered with Fusion MPT base driver
[ 0.564415] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 0.564551] yenta_cardbus 0000:0a:03.0: CardBus bridge found [104d:81ef]
[ 0.564674] yenta_cardbus 0000:0a:03.0: Enabling burst memory read transactions
[ 0.564804] yenta_cardbus 0000:0a:03.0: Using CSCINT to route CSC interrupts to PCI
[ 0.564927] yenta_cardbus 0000:0a:03.0: Routing CardBus interrupts to PCI
[ 0.565019] yenta_cardbus 0000:0a:03.0: TI: mfunc 0x01131b22, devctl 0x64
[ 0.567622] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.567747] Uniform CD-ROM driver Revision: 3.20
[ 0.568226] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.568504] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.695064] ata3.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100
[ 0.695175] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.701873] ata3.00: configured for UDMA/100
[ 0.702301] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0000 PQ: 0 ANSI: 5
[ 0.703525] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.703988] sd 2:0:0:0: [sda] Write Protect is off
[ 0.704099] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.704293] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.705170] sda:
[ 0.705829] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.746974] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 0.821810] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.944886] yenta_cardbus 0000:0a:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 0.944998] yenta_cardbus 0000:0a:03.0: Socket status: 30000006
[ 0.945013] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 0.945013] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 0.945013] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[ 0.945013] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 1.197849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.197960] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 1.198075] xen: registering gsi 23 triggering 0 polarity 1
[ 1.198089] alloc irq_desc for 23 on node 0
[ 1.198099] alloc kstat_irqs on node 0
[ 1.198115] xen: --> irq=23
[ 1.198125] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 1.198291] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.198441] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.198458] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.198612] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 1.198630] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.198910] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.199078] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 1.199091] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.199224] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
[ 1.203149] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.203273] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.203283] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.203341] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd03c4000
[ 1.203452] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.207351] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.214047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.214255] usb usb1: default language 0x0409
[ 1.214300] usb usb1: udev 1, busnum 1, minor = 0
[ 1.214310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.214424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.214575] usb usb1: Product: EHCI Host Controller
[ 1.214679] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 1.214784] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.215028] usb usb1: uevent
[ 1.215233] usb usb1: usb_probe_device
[ 1.215244] usb usb1: configuration #1 chosen from 1 choice
[ 1.215370] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.215425] usb 1-0:1.0: uevent
[ 1.215625] hub 1-0:1.0: usb_probe_interface
[ 1.215635] hub 1-0:1.0: usb_probe_interface - got id
[ 1.215645] hub 1-0:1.0: USB hub found
[ 1.216666] hub 1-0:1.0: 8 ports detected
[ 1.216770] hub 1-0:1.0: standalone hub
[ 1.216778] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.216788] hub 1-0:1.0: individual port over-current protection
[ 1.216798] hub 1-0:1.0: power on to power good time: 20ms
[ 1.216824] hub 1-0:1.0: local power source is good
[ 1.216834] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.216962] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.217276] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.217386] ohci_hcd: block sizes: ed 64 td 64
[ 1.217629] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.217809] xen: registering gsi 23 triggering 0 polarity 1
[ 1.217820] xen_allocate_pirq: returning irq 23 for gsi 23
[ 1.217925] xen: --> irq=23
[ 1.217936] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 1.218116] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.218235] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.218235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.218235] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 1.218621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.218789] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.218902] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.218913] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.218952] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.218974] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.219290] usb usb2: default language 0x0409
[ 1.219335] usb usb2: udev 1, busnum 2, minor = 128
[ 1.219345] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.219456] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.219607] usb usb2: Product: UHCI Host Controller
[ 1.219709] usb usb2: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.219812] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.220088] usb usb2: uevent
[ 1.220290] usb usb2: usb_probe_device
[ 1.220302] usb usb2: configuration #1 chosen from 1 choice
[ 1.220427] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.220482] usb 2-0:1.0: uevent
[ 1.220698] hub 2-0:1.0: usb_probe_interface
[ 1.220708] hub 2-0:1.0: usb_probe_interface - got id
[ 1.220718] hub 2-0:1.0: USB hub found
[ 1.220867] hub 2-0:1.0: 2 ports detected
[ 1.220969] hub 2-0:1.0: standalone hub
[ 1.220978] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.220987] hub 2-0:1.0: individual port over-current protection
[ 1.220997] hub 2-0:1.0: power on to power good time: 2ms
[ 1.221049] hub 2-0:1.0: local power source is good
[ 1.221060] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.221128] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.221240] xen: registering gsi 17 triggering 0 polarity 1
[ 1.221250] xen_allocate_pirq: returning irq 17 for gsi 17
[ 1.221355] xen: --> irq=17
[ 1.221366] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1
[ 1.221527] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.221653] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.221669] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.221786] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 1.222066] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.222232] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.222346] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.222357] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.222396] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 1.222452] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.222725] usb usb3: default language 0x0409
[ 1.222770] usb usb3: udev 1, busnum 3, minor = 256
[ 1.222780] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.222889] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.223013] usb usb3: Product: UHCI Host Controller
[ 1.223013] usb usb3: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.223013] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.223511] usb usb3: uevent
[ 1.223716] usb usb3: usb_probe_device
[ 1.223727] usb usb3: configuration #1 chosen from 1 choice
[ 1.223851] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.223907] usb 3-0:1.0: uevent
[ 1.224106] hub 3-0:1.0: usb_probe_interface
[ 1.224116] hub 3-0:1.0: usb_probe_interface - got id
[ 1.224127] hub 3-0:1.0: USB hub found
[ 1.224276] hub 3-0:1.0: 2 ports detected
[ 1.224379] hub 3-0:1.0: standalone hub
[ 1.224388] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.224397] hub 3-0:1.0: individual port over-current protection
[ 1.224406] hub 3-0:1.0: power on to power good time: 2ms
[ 1.224432] hub 3-0:1.0: local power source is good
[ 1.224443] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.224509] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.224622] xen: registering gsi 18 triggering 0 polarity 1
[ 1.224632] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.224736] xen: --> irq=18
[ 1.224747] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 1.224907] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.225032] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.225046] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.225061] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004'
[ 1.225427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.225596] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.225709] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.225720] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.225758] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 1.225815] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.226109] usb usb4: default language 0x0409
[ 1.226153] usb usb4: udev 1, busnum 4, minor = 384
[ 1.226163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.226275] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.226426] usb usb4: Product: UHCI Host Controller
[ 1.226529] usb usb4: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.226634] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.226856] usb usb4: uevent
[ 1.227074] usb usb4: usb_probe_device
[ 1.227085] usb usb4: configuration #1 chosen from 1 choice
[ 1.227209] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.227264] usb 4-0:1.0: uevent
[ 1.227463] hub 4-0:1.0: usb_probe_interface
[ 1.227473] hub 4-0:1.0: usb_probe_interface - got id
[ 1.227483] hub 4-0:1.0: USB hub found
[ 1.227630] hub 4-0:1.0: 2 ports detected
[ 1.227733] hub 4-0:1.0: standalone hub
[ 1.227741] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.227750] hub 4-0:1.0: individual port over-current protection
[ 1.227760] hub 4-0:1.0: power on to power good time: 2ms
[ 1.227785] hub 4-0:1.0: local power source is good
[ 1.227796] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.227863] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.227981] xen: registering gsi 16 triggering 0 polarity 1
[ 1.227991] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.228098] xen: --> irq=16
[ 1.228108] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.228283] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.228439] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.228455] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.228571] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005'
[ 1.228849] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.229039] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.229155] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.229166] uhci_hcd 0000:00:1d.3: Performing full reset
[ 1.229205] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[ 1.229228] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.229499] usb usb5: default language 0x0409
[ 1.229543] usb usb5: udev 1, busnum 5, minor = 512
[ 1.229553] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.229663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.229813] usb usb5: Product: UHCI Host Controller
[ 1.229915] usb usb5: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.230017] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.230017] usb usb5: uevent
[ 1.230422] usb usb5: usb_probe_device
[ 1.230433] usb usb5: configuration #1 chosen from 1 choice
[ 1.230557] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.230611] usb 5-0:1.0: uevent
[ 1.230810] hub 5-0:1.0: usb_probe_interface
[ 1.230820] hub 5-0:1.0: usb_probe_interface - got id
[ 1.230830] hub 5-0:1.0: USB hub found
[ 1.230977] hub 5-0:1.0: 2 ports detected
[ 1.231083] hub 5-0:1.0: standalone hub
[ 1.231091] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.231100] hub 5-0:1.0: individual port over-current protection
[ 1.231109] hub 5-0:1.0: power on to power good time: 2ms
[ 1.231156] hub 5-0:1.0: local power source is good
[ 1.231167] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.231233] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.231764] usbcore: registered new interface driver usblp
[ 1.231875] Initializing USB Mass Storage driver...
[ 1.232123] usbcore: registered new interface driver usb-storage
[ 1.232206] USB Mass Storage support registered.
[ 1.232418] usbcore: registered new interface driver libusual
[ 1.232752] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.237720] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.237720] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.241262] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.242120] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.242120] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.242120] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.242826] mice: PS/2 mouse device common for all mice
[ 1.244022] rtc_cmos 00:06: RTC can wake from S4
[ 1.244271] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.244403] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 1.244621] xen: registering gsi 19 triggering 0 polarity 1
[ 1.244627] xen_allocate_pirq: returning irq 19 for gsi 19
[ 1.244709] xen: --> irq=19
[ 1.244716] xen_set_ioapic_routing: irq 19 gsi 19 vector 19 ioapic 0 pin 19 triggering 1 polarity 1
[ 1.244854] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.245820] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.246185] cpuidle: using governor ladder
[ 1.246267] cpuidle: using governor menu
[ 1.249854] usbcore: registered new interface driver hiddev
[ 1.250056] usbcore: registered new interface driver usbhid
[ 1.250140] usbhid: v2.6:USB HID core driver
[ 1.250707] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 1.260018] xen: registering gsi 22 triggering 0 polarity 1
[ 1.260029] alloc irq_desc for 22 on node 0
[ 1.260035] alloc kstat_irqs on node 0
[ 1.260043] xen: --> irq=22
[ 1.260049] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 1.260186] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.260384] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1.316159] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
[ 1.316177] hub 1-0:1.0: port 8: status 0501 change 0001
[ 1.320135] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.321466] ALSA device list:
[ 1.321572] #0: HDA Intel at 0xd01c0000 irq 22
[ 1.321763] Netfilter messages via NETLINK v0.30.
[ 1.321906] nf_conntrack version 0.5.0 (14919 buckets, 59676 max)
[ 1.322861] ctnetlink v0.93: registering with nfnetlink.
[ 1.324449] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.324611] TCP cubic registered
[ 1.324711] Initializing XFRM netlink socket
[ 1.325022] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.326276] NET: Registered protocol family 10
[ 1.327303] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.328904] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.329171] IPv6 over IPv4 tunneling driver
[ 1.330332] uhci_hcd 0000:00:1d.3: port 2 portsc 0082,00
[ 1.330972] NET: Registered protocol family 17
[ 1.331784] RPC: Registered udp transport module.
[ 1.331891] RPC: Registered tcp transport module.
[ 1.332143] Using IPI No-Shortcut mode
[ 1.332966] PM: Resume from disk failed.
[ 1.333039] registered taskstats version 1
[ 1.333588] Magic number: 14:216:645
[ 1.334068] Freeing unused kernel memory: 408k freed
[ 1.339050] Write protecting the kernel text: 4824k
[ 1.341394] Write protecting the kernel read-only data: 2360k
[ 1.416123] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
[ 1.416155] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[ 1.446505] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.467532] ehci_hcd 0000:00:1d.7: port 8 high speed
[ 1.467548] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
[ 1.518295] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 1.572527] ehci_hcd 0000:00:1d.7: port 8 high speed
[ 1.572536] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
[ 1.647304] usb 1-8: default language 0x0409
[ 1.660055] usb 1-8: udev 2, busnum 1, minor = 1
[ 1.660061] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c002
[ 1.660151] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.660237] usb 1-8: Product: USB2.0 Web Camera
[ 1.660319] usb 1-8: Manufacturer: Vimicro Corp.
[ 1.660506] usb 1-8: uevent
[ 1.660629] usb 1-8: usb_probe_device
[ 1.660636] usb 1-8: configuration #1 chosen from 1 choice
[ 1.661114] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[ 1.661146] usb 1-8:1.0: uevent
[ 1.661356] /home/ashish/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 1.661395] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.715829] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
[ 1.737558] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
[ 2.434442] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[ 2.451492] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[ 2.455033] usb usb2: suspend_rh (auto-stop)
[ 2.455076] usb usb3: suspend_rh (auto-stop)
[ 2.455117] usb usb4: suspend_rh (auto-stop)
[ 2.455159] usb usb5: suspend_rh (auto-stop)
[ 2.523808] usb usb2: uevent
[ 2.523849] usb 2-0:1.0: uevent
[ 2.523956] usb usb3: uevent
[ 2.524002] usb 3-0:1.0: uevent
[ 2.524110] usb usb4: uevent
[ 2.524148] usb 4-0:1.0: uevent
[ 2.524266] usb usb5: uevent
[ 2.524310] usb 5-0:1.0: uevent
[ 2.524417] usb usb1: uevent
[ 2.524455] usb 1-0:1.0: uevent
[ 2.524499] usb 1-8: uevent
[ 2.524538] usb 1-8:1.0: uevent
[ 3.399238] ohci1394 0000:0a:03.1: enabling device (0000 -> 0002)
[ 3.399254] xen: registering gsi 16 triggering 0 polarity 1
[ 3.399254] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.399254] xen: --> irq=16
[ 3.399254] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 3.399254] ohci1394 0000:0a:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.451330] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0006000-d00067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.701305] hub 2-0:1.0: hub_suspend
[ 3.701318] usb usb2: bus auto-suspend
[ 3.701324] usb usb2: suspend_rh
[ 3.701355] hub 3-0:1.0: hub_suspend
[ 3.701363] usb usb3: bus auto-suspend
[ 3.701368] usb usb3: suspend_rh
[ 3.701395] hub 4-0:1.0: hub_suspend
[ 3.701403] usb usb4: bus auto-suspend
[ 3.701408] usb usb4: suspend_rh
[ 3.704030] hub 5-0:1.0: hub_suspend
[ 3.704041] usb usb5: bus auto-suspend
[ 3.704046] usb usb5: suspend_rh
[ 4.709327] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603022cbe77]
[ 5.164792] PM: Starting manual resume from disk
[ 5.164875] PM: Resume from partition 8:9
[ 5.164880] PM: Checking hibernation image.
[ 5.165145] PM: Resume from disk failed.
[ 5.200304] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.200391] EXT3-fs: write access will be enabled during recovery.
[ 5.800551] kjournald starting. Commit interval 5 seconds
[ 5.800586] EXT3-fs: sda8: orphan cleanup on readonly fs
[ 5.800602] ext3_orphan_cleanup: deleting unreferenced inode 194318
[ 5.800661] EXT3-fs: sda8: 1 orphan inode deleted
[ 5.800668] EXT3-fs: recovery complete.
[ 5.813015] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.066122] usb usb2: uevent
[ 13.066211] usb 2-0:1.0: uevent
[ 13.066466] usb usb3: uevent
[ 13.066554] usb 3-0:1.0: uevent
[ 13.066844] usb usb4: uevent
[ 13.066931] usb 4-0:1.0: uevent
[ 13.067210] usb usb5: uevent
[ 13.067296] usb 5-0:1.0: uevent
[ 13.067544] usb usb1: uevent
[ 13.067631] usb 1-0:1.0: uevent
[ 13.067722] usb 1-8: uevent
[ 13.067843] usb 1-8:1.0: uevent
[ 14.313662] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.600394] warning: `dhclient3' uses 32-bit capabilities (legacy support in use)
[ 16.701402] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 16.701858] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.920521] Adding 6835616k swap on /dev/sda9. Priority:-1 extents:1 across:6835616k
[ 17.482118] EXT3 FS on sda8, internal journal
[ 20.197340] kjournald starting. Commit interval 5 seconds
[ 20.197889] EXT3 FS on sda7, internal journal
[ 20.197908] EXT3-fs: mounted filesystem with writeback data mode.
[ 24.513350] vbetool[3959]: segfault at c0014 ip 00000014 sp 00000ffa error 15 in mem[0+1000]
[ 27.167261] eth0: no IPv6 routers present
[ 28.662304] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 28.986955] svc: failed to register lockdv1 RPC service (errno 97).
[ 32.035346] usb usb5: usb auto-resume
[ 32.035360] usb usb5: wakeup_rh
[ 32.067056] hub 5-0:1.0: hub_resume
[ 32.067135] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.067404] usb usb4: usb auto-resume
[ 32.067415] usb usb4: wakeup_rh
[ 32.099054] hub 4-0:1.0: hub_resume
[ 32.099125] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.099437] usb usb3: usb auto-resume
[ 32.099448] usb usb3: wakeup_rh
[ 32.131053] hub 3-0:1.0: hub_resume
[ 32.131125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.131384] usb usb2: usb auto-resume
[ 32.131395] usb usb2: wakeup_rh
[ 32.163053] hub 2-0:1.0: hub_resume
[ 32.163123] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.204035] usb usb5: suspend_rh (auto-stop)
[ 33.204080] usb usb4: suspend_rh (auto-stop)
[ 33.204120] usb usb3: suspend_rh (auto-stop)
[ 33.204161] usb usb2: suspend_rh (auto-stop)
[ 34.704183] hub 5-0:1.0: hub_suspend
[ 34.704196] usb usb5: bus auto-suspend
[ 34.704203] usb usb5: suspend_rh
[ 34.704237] hub 4-0:1.0: hub_suspend
[ 34.704246] usb usb4: bus auto-suspend
[ 34.704276] usb usb4: suspend_rh
[ 34.704303] hub 3-0:1.0: hub_suspend
[ 34.704311] usb usb3: bus auto-suspend
[ 34.704316] usb usb3: suspend_rh
[ 34.704343] hub 2-0:1.0: hub_suspend
[ 34.704351] usb usb2: bus auto-suspend
[ 34.704356] usb usb2: suspend_rh
[ 36.352055] evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
[ 124.312517] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 124.517595] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 126.701153] e100: peth0 NIC Link is Up 100 Mbps Full Duplex
[ 126.701666] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 127.729886] device peth0 entered promiscuous mode
[ 127.762605] eth0: port 1(peth0) entering forwarding state
[ 131.041747] alloc irq_desc for 406 on node 0
[ 131.041753] alloc kstat_irqs on node 0
[ 131.041822] xenbus_probe wake_waiting
[ 131.041829] alloc irq_desc for 405 on node 0
[ 131.041836] alloc kstat_irqs on node 0
[ 131.041862] xenbus_probe wake_waiting
[ 131.053558] XENBUS: Unable to read cpu state
[ 131.054114] XENBUS: Unable to read cpu state
[ 131.054664] xenbus_probe_devices backend
[ 131.054841] xenbus_probe_devices failed xenbus_directory
[ 131.054846] backend_probe_and_watch devices probed ok
[ 131.055034] backend_probe_and_watch watch add ok ok
[ 131.055040] backend_probe_and_watch all done
[ 131.055045] xenbus_probe_devices device
[ 131.056905] xenbus_probe_devices failed xenbus_directory
[ 131.056911] frontend_probe_and_watch devices probed ok
[ 131.057119] frontend_probe_and_watch watch add ok ok
[ 131.057125] frontend_probe_and_watch all done
[ 137.380020] peth0: no IPv6 routers present
[ 138.638068] eth0: no IPv6 routers present
[ 565.184716] blktap_sysfs_create: adding attributes for dev ecdc0cc0
[ 565.184730] blktap_control_allocate_tap: allocated tap e39f9c00
[ 565.187879] tapdisk2[5763]: segfault at 10 ip b75e8540 sp bfe36c7c error 4 in libpthread-2.7.so[b75e1000+14000]
[ 7112.595428] alloc irq_desc for 404 on node 0
[ 7112.595435] alloc kstat_irqs on node 0
[ 7112.648271] blktap_sysfs_create: adding attributes for dev eb5506c0
[ 7112.648287] blktap_control_allocate_tap: allocated tap de87e000
[ 7112.651564] tapdisk2[7325]: segfault at 10 ip b763a540 sp bffd548c error 4 in libpthread-2.7.so[b7633000+14000]
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] blktap2: disable presently broken memshr extension
2010-02-11 1:45 tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Ashish Bijlani
@ 2010-02-11 7:45 ` Daniel Stodden
2010-02-11 7:56 ` tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Daniel Stodden
1 sibling, 0 replies; 7+ messages in thread
From: Daniel Stodden @ 2010-02-11 7:45 UTC (permalink / raw)
To: Xen; +Cc: Ashish Bijlani
[-- Attachment #1: Type: text/plain, Size: 60 bytes --]
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
[-- Attachment #2: xen-unstable.hg.patch --]
[-- Type: text/x-patch, Size: 717 bytes --]
# HG changeset patch
# User Daniel Stodden <daniel.stodden@citrix.com>
# Date 1265874204 28800
# Node ID 4742f6ce4e3bb7b7ee70b1a270494b42ee0ed4bf
# Parent 83a6621b91bffebdb8696a04b711b4689ee08170
blktap2: disable presently broken memshr extension.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
diff -r 83a6621b91bf -r 4742f6ce4e3b tools/blktap2/drivers/Makefile
--- a/tools/blktap2/drivers/Makefile Wed Feb 10 09:20:56 2010 +0000
+++ b/tools/blktap2/drivers/Makefile Wed Feb 10 23:43:24 2010 -0800
@@ -57,7 +57,7 @@
MEMSHR_DIR = $(XEN_ROOT)/tools/memshr
MEMSHRLIBS :=
-ifeq ($(CONFIG_Linux), y)
+ifeq ($(CONFIG_Linux), __fixme__)
CFLAGS += -DMEMSHR
MEMSHRLIBS += $(MEMSHR_DIR)/libmemshr.a
endif
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
2010-02-11 1:45 tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Ashish Bijlani
2010-02-11 7:45 ` [PATCH] blktap2: disable presently broken memshr extension Daniel Stodden
@ 2010-02-11 7:56 ` Daniel Stodden
2010-02-11 14:11 ` Ashish Bijlani
[not found] ` <414492355.20100211121837@eikelenboom.it>
1 sibling, 2 replies; 7+ messages in thread
From: Daniel Stodden @ 2010-02-11 7:56 UTC (permalink / raw)
To: Ashish Bijlani; +Cc: Fitzhardinge, xen-devel, Jeremy
Hi,
Disable memshr in tools/blktap2/Makefile. Find a patch next to this
mail, unless Keir pulled it in by the time you read this.
Disable CONFIG_HIGHPTE, the config you posted has it enabled.
The pvops kernel wants a bunch of patches which haven't made it into
Jeremy's tree yet. The latest version was posted here.
http://lists.xensource.com/archives/html/xen-devel/2010-02/msg00331.html
Let me know if this work for you. Especially if it doesn't, but I
haven't heard about more open issues lately.
Thanks,
Daniel
On Wed, 2010-02-10 at 20:45 -0500, Ashish Bijlani wrote:
> Hi,
>
> I'm trying to run guest pv vm on my machine running xen-unstable
> (xen-4.0.0-rc3.pre + linux-2.6-pvops). However, I get blktap error:
>
> "
> sudo xm create -c xmexample
> Using config file "./xmexample".
> Error: Failed to create device.
> stdout: unrecognized child response
> stderr:
> Check that target "/home/ashish/xen/hd.img" exists and that blktap2
> driver installed in dom0.
> "
>
> Dom0 dmesg shows:
>
> "
> [ 7112.648271] blktap_sysfs_create: adding attributes for dev eb5506c0
> [ 7112.648287] blktap_control_allocate_tap: allocated tap de87e000
> [ 7112.651564] tapdisk2[7325]: segfault at 10 ip b763a540 sp bffd548c
> error 4 in libpthread-2.7.so[b7633000+14000]
> "
>
> tapdisk2 -n aio:/home/ashish/xen/hd.img output shows the same above segfault msg
>
> Any ideas what could be wrong?
>
> config, xmexample, and dmesg attached.
>
> Thanks,
> Ashish
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
2010-02-11 7:56 ` tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Daniel Stodden
@ 2010-02-11 14:11 ` Ashish Bijlani
[not found] ` <414492355.20100211121837@eikelenboom.it>
1 sibling, 0 replies; 7+ messages in thread
From: Ashish Bijlani @ 2010-02-11 14:11 UTC (permalink / raw)
To: Daniel Stodden; +Cc: Jeremy Fitzhardinge, xen-devel
Hey Daniel,
Disabling msmshr worked for me. Thanks !!
- Ashish
On Thu, Feb 11, 2010 at 2:56 AM, Daniel Stodden
<daniel.stodden@citrix.com> wrote:
>
> Hi,
>
> Disable memshr in tools/blktap2/Makefile. Find a patch next to this
> mail, unless Keir pulled it in by the time you read this.
>
> Disable CONFIG_HIGHPTE, the config you posted has it enabled.
>
> The pvops kernel wants a bunch of patches which haven't made it into
> Jeremy's tree yet. The latest version was posted here.
>
> http://lists.xensource.com/archives/html/xen-devel/2010-02/msg00331.html
>
> Let me know if this work for you. Especially if it doesn't, but I
> haven't heard about more open issues lately.
>
> Thanks,
> Daniel
>
> On Wed, 2010-02-10 at 20:45 -0500, Ashish Bijlani wrote:
>> Hi,
>>
>> I'm trying to run guest pv vm on my machine running xen-unstable
>> (xen-4.0.0-rc3.pre + linux-2.6-pvops). However, I get blktap error:
>>
>> "
>> sudo xm create -c xmexample
>> Using config file "./xmexample".
>> Error: Failed to create device.
>> stdout: unrecognized child response
>> stderr:
>> Check that target "/home/ashish/xen/hd.img" exists and that blktap2
>> driver installed in dom0.
>> "
>>
>> Dom0 dmesg shows:
>>
>> "
>> [ 7112.648271] blktap_sysfs_create: adding attributes for dev eb5506c0
>> [ 7112.648287] blktap_control_allocate_tap: allocated tap de87e000
>> [ 7112.651564] tapdisk2[7325]: segfault at 10 ip b763a540 sp bffd548c
>> error 4 in libpthread-2.7.so[b7633000+14000]
>> "
>>
>> tapdisk2 -n aio:/home/ashish/xen/hd.img output shows the same above segfault msg
>>
>> Any ideas what could be wrong?
>>
>> config, xmexample, and dmesg attached.
>>
>> Thanks,
>> Ashish
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
[not found] ` <1265887353.14118.300.camel@ramone.somacoma.net>
@ 2010-02-11 14:17 ` Sander Eikelenboom
[not found] ` <1265922182.9385.18.camel@agari.van.xensource.com>
0 siblings, 1 reply; 7+ messages in thread
From: Sander Eikelenboom @ 2010-02-11 14:17 UTC (permalink / raw)
To: Daniel Stodden; +Cc: Xen-Devel (E-mail)
Hello Daniel,
Patches applied, and it seems to be working so far !
Thx.
Hope that Jeremy hasn't ignored the patches because of the name of the diffs.
--
Sander
Thursday, February 11, 2010, 12:22:33 PM, you wrote:
> On Thu, 2010-02-11 at 06:18 -0500, Sander Eikelenboom wrote:
>> Hello Daniel,
>>
>> Ah these patches are actually for pvops (since the attached diffs are all called linux-2.6.18-xen .....)
>> Will give them a try then :-)
> Sorry if that was confusing. I thought the subject line makes it clear.
> Most of them were ported forward from 2.6.18 and the naming just keeps
> track of which is which.
> Daniel
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
[not found] ` <1265922182.9385.18.camel@agari.van.xensource.com>
@ 2010-02-12 13:21 ` Sander Eikelenboom
2010-02-12 22:30 ` Daniel Stodden
0 siblings, 1 reply; 7+ messages in thread
From: Sander Eikelenboom @ 2010-02-12 13:21 UTC (permalink / raw)
To: Daniel Stodden; +Cc: xen-devel
Hello Daniel,
Done some benchmarking with bonnie++ and it seems blktap2 at present performs slightly better than loopback with raw image files, didn't see crashes or other problems so far.
Will the disabling of shared mem for blktap2 give a big performance hit ?
--
Sander
Thursday, February 11, 2010, 10:03:02 PM, you wrote:
> On Thu, 2010-02-11 at 09:17 -0500, Sander Eikelenboom wrote:
>> Hello Daniel,
>>
>> Patches applied, and it seems to be working so far !
>> Thx.
>>
>> Hope that Jeremy hasn't ignored the patches because of the name of the diffs.
> Valid point.
> Hey Jeremy. Is what's the situation wrt getting those into git?
> http://lists.xensource.com/archives/html/xen-devel/2010-02/msg00331.html
> Daniel
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tapdisk2 segfaults with xen-unstable+linux-2.6-pvops
2010-02-12 13:21 ` Sander Eikelenboom
@ 2010-02-12 22:30 ` Daniel Stodden
0 siblings, 0 replies; 7+ messages in thread
From: Daniel Stodden @ 2010-02-12 22:30 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel
On Fri, 2010-02-12 at 08:21 -0500, Sander Eikelenboom wrote:
> Hello Daniel,
>
> Done some benchmarking with bonnie++ and it seems blktap2 at present performs slightly better than loopback with raw image files, didn't see crashes or other problems so far.
Good to hear. Thanks for the feedback and keep me cc'd if you can.
> Will the disabling of shared mem for blktap2 give a big performance hit ?
Memshr is mainly a h/v extension, only driven by tapdisk.
I didn't catch up on the implementation yet. But the idea is to
establish cow mappings on clean buffers read from shared disk images.
Provided the mappings are shadowed in one way or the other. Think
OS-level pagecache.
It's a really good idea. But unless you're actually running a
significant number of clones from a shared master image it will be
generating nothing but overhead.
I think any non-manual decision on whether to turn it on or off should
reside in the hands of a host agent overseeing the potential benefit.
Which is beyond tapdisk, and certainly beyond a hardcoded Makefile
macro.
Whether crashing or not, the medium term update should turn it into a
proper block driver layer.
Cheers,
Daniel
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-02-12 22:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-11 1:45 tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Ashish Bijlani
2010-02-11 7:45 ` [PATCH] blktap2: disable presently broken memshr extension Daniel Stodden
2010-02-11 7:56 ` tapdisk2 segfaults with xen-unstable+linux-2.6-pvops Daniel Stodden
2010-02-11 14:11 ` Ashish Bijlani
[not found] ` <414492355.20100211121837@eikelenboom.it>
[not found] ` <1265887353.14118.300.camel@ramone.somacoma.net>
2010-02-11 14:17 ` Sander Eikelenboom
[not found] ` <1265922182.9385.18.camel@agari.van.xensource.com>
2010-02-12 13:21 ` Sander Eikelenboom
2010-02-12 22:30 ` Daniel Stodden
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.