* [U-Boot] [Patch] Enable I2C0 of NanoPiNeo2
@ 2018-12-07 9:15 Ronny Lubke
0 siblings, 0 replies; only message in thread
From: Ronny Lubke @ 2018-12-07 9:15 UTC (permalink / raw)
To: u-boot
For getting the I2C0 bus working in u-boot, the used PINS had to be
enabled in the board.c.
In the nanopi_neo2_defconfig you have to set the CONFIG_I2C0_ENABLE=y.
Best regards
Ronny Lubke
-------------------------------------
Engineer
Metirionic GmbH
Strehlener Straße 12 - 14
01069 Dresden
phone: +49-351-873229-26
http://www.metirionic.com/
Geschaeftsfuehrung: Dr. Attila Roemer
Gesellschaftssitz: Dresden
Amtsgericht: Dresden
HRB 32209
-------------- next part --------------
A non-text attachment was scrubbed...
Name: i2c_neo2.patch
Type: text/x-patch
Size: 1703 bytes
Desc: i2c_neo2.patch
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181207/22a3858b/attachment.bin>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-12-07 9:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-07 9:15 [U-Boot] [Patch] Enable I2C0 of NanoPiNeo2 Ronny Lubke
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.