All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/9] arm64: dts: renesas: r8a77990: Remove non-existing STBE region
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman

From: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car E3 does not have the Stream Buffer for EtherAVB-IF (STBE).

Note that the RAVB driver does not use this region.

Fixes: 913a78b575c313b8 ("arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index f8004608c595..615a0d2edffc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -213,7 +213,7 @@
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 1/9] arm64: dts: renesas: r8a77990: Remove non-existing STBE region
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car E3 does not have the Stream Buffer for EtherAVB-IF (STBE).

Note that the RAVB driver does not use this region.

Fixes: 913a78b575c313b8 ("arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index f8004608c595..615a0d2edffc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -213,7 +213,7 @@
 		avb: ethernet at e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 2/9] arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman

From: Geert Uytterhoeven <geert+renesas@glider.be>

With recent dtc and W=1:

    ...salvator-x.dtb: Warning (graph_port): /soc/i2c@e66d8000/video-receiver@70/port@10: graph node unit address error, expected "a"
    ...salvator-x.dtb: Warning (graph_port): /soc/i2c@e66d8000/video-receiver@70/port@11: graph node unit address error, expected "b"

Unit addresses are always hexadecimal (without prefix), while the bases
of reg property values depend on their prefixes.

Fixes: 908001d778eba06e ("arm64: dts: renesas: salvator-common: Add ADV7482 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index ce808d3f9f62..6439d05fd7ec 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -446,7 +446,7 @@
 			};
 		};
 
-		port@10 {
+		port@a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -456,7 +456,7 @@
 			};
 		};
 
-		port@11 {
+		port@b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 2/9] arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@glider.be>

With recent dtc and W=1:

    ...salvator-x.dtb: Warning (graph_port): /soc/i2c at e66d8000/video-receiver at 70/port at 10: graph node unit address error, expected "a"
    ...salvator-x.dtb: Warning (graph_port): /soc/i2c at e66d8000/video-receiver at 70/port at 11: graph node unit address error, expected "b"

Unit addresses are always hexadecimal (without prefix), while the bases
of reg property values depend on their prefixes.

Fixes: 908001d778eba06e ("arm64: dts: renesas: salvator-common: Add ADV7482 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index ce808d3f9f62..6439d05fd7ec 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -446,7 +446,7 @@
 			};
 		};
 
-		port at 10 {
+		port at a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -456,7 +456,7 @@
 			};
 		};
 
-		port at 11 {
+		port at b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 3/9] arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman

This node is just a placeholder but fills that function better if it does
not trigger build warnings. This update satisfies the requirement that
nodes with #address-cells/#size-cells properties have more than one child
node.

This is flagged by dtc as follows:
 # make dtbs W=1
 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
 arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index be8631dff1b4..a37749caf40e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1269,6 +1269,9 @@
 				port@0 {
 					reg = <0>;
 				};
+				port@1 {
+					reg = <1>;
+				};
 			};
 		};
 
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 3/9] arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

This node is just a placeholder but fills that function better if it does
not trigger build warnings. This update satisfies the requirement that
nodes with #address-cells/#size-cells properties have more than one child
node.

This is flagged by dtc as follows:
 # make dtbs W=1
 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (graph_child_address): /soc/sound at ec500000/ports: graph node has single child node 'port at 0', #address-cells/#size-cells are not necessary
 arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (graph_child_address): /soc/sound at ec500000/ports: graph node has single child node 'port at 0', #address-cells/#size-cells are not necessary

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index be8631dff1b4..a37749caf40e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1269,6 +1269,9 @@
 				port at 0 {
 					reg = <0>;
 				};
+				port at 1 {
+					reg = <1>;
+				};
 			};
 		};
 
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 4/9] arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman

From: Geert Uytterhoeven <geert+renesas@glider.be>

HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
supported range of bitrates).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 6439d05fd7ec..9687166c4473 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -33,7 +33,7 @@
 / {
 	aliases {
 		serial0 = &scif2;
-		serial1 = &scif1;
+		serial1 = &hscif1;
 		ethernet0 = &avb;
 	};
 
@@ -344,7 +344,7 @@
 
 	uart-has-rtscts;
 	/* Please only enable hscif1 or scif1 */
-	/* status = "okay"; */
+	status = "okay";
 };
 
 &hsusb {
@@ -723,7 +723,7 @@
 
 	uart-has-rtscts;
 	/* Please only enable hscif1 or scif1 */
-	status = "okay";
+	/* status = "okay"; */
 };
 
 &scif2 {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 4/9] arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@glider.be>

HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
supported range of bitrates).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 6439d05fd7ec..9687166c4473 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -33,7 +33,7 @@
 / {
 	aliases {
 		serial0 = &scif2;
-		serial1 = &scif1;
+		serial1 = &hscif1;
 		ethernet0 = &avb;
 	};
 
@@ -344,7 +344,7 @@
 
 	uart-has-rtscts;
 	/* Please only enable hscif1 or scif1 */
-	/* status = "okay"; */
+	status = "okay";
 };
 
 &hsusb {
@@ -723,7 +723,7 @@
 
 	uart-has-rtscts;
 	/* Please only enable hscif1 or scif1 */
-	status = "okay";
+	/* status = "okay"; */
 };
 
 &scif2 {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 5/9] arm64: dts: renesas: Unify the labels for RWDT
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Yoshihiro Shimoda, Simon Horman

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

The labels for RWDT device node were named as 2 types now:

 - wdt0: r8a7795, r8a7796, r8a77965.
 - rwdt: r8a77970, r8a77990, r8a77995.

To be made consistent, this patch unifis the labels as the hardware
name "rwdt".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi         | 2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi         | 2 +-
 arch/arm64/boot/dts/renesas/r8a77965.dtsi        | 2 +-
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
 arch/arm64/boot/dts/renesas/ulcb.dtsi            | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e07546f91dff..fb9d08ad7659 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -288,7 +288,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index af8196281b06..cbd35c00b4af 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -266,7 +266,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7796-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index a37749caf40e..59afc5592ee0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -138,7 +138,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a77965-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 9687166c4473..7d3d866a0063 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -850,7 +850,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 83c546c0fe86..0ead552d7eae 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -444,7 +444,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 5/9] arm64: dts: renesas: Unify the labels for RWDT
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

The labels for RWDT device node were named as 2 types now:

 - wdt0: r8a7795, r8a7796, r8a77965.
 - rwdt: r8a77970, r8a77990, r8a77995.

To be made consistent, this patch unifis the labels as the hardware
name "rwdt".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi         | 2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi         | 2 +-
 arch/arm64/boot/dts/renesas/r8a77965.dtsi        | 2 +-
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
 arch/arm64/boot/dts/renesas/ulcb.dtsi            | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e07546f91dff..fb9d08ad7659 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -288,7 +288,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog at e6020000 {
+		rwdt: watchdog at e6020000 {
 			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index af8196281b06..cbd35c00b4af 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -266,7 +266,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog at e6020000 {
+		rwdt: watchdog at e6020000 {
 			compatible = "renesas,r8a7796-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index a37749caf40e..59afc5592ee0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -138,7 +138,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog at e6020000 {
+		rwdt: watchdog at e6020000 {
 			compatible = "renesas,r8a77965-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 9687166c4473..7d3d866a0063 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -850,7 +850,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 83c546c0fe86..0ead552d7eae 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -444,7 +444,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 6/9] arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman

From: Magnus Damm <damm+renesas@opensource.se>

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to r8a7796 however VP0
  has been added and PV1 has been removed. Also the IMSSTR
  bit assignment has been reworked.

* The r8a77980 IPMMU is quite similar to r8a77970 however VC0
  has been added. The IMSSTR bit assignment has also been
  reworked. Power domains are also quite different however the
  the documentation is rather unclear about this topic.

  Until we know better VC0 gets assigned to R8A77980_PD_ALWAYS_ON.

* The r8a77990 IPMMU is similar to r8a77995. Power domains are
  however different and the public documentation is still unclear.

  Based on preliminary information from the hardware team the R-Car E3
  SoC comes with an IPMMU-VP0 device in an Always-on power domain and
  the IPMMU-VC0 is placed as expected in the A3VC power domain.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 89 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77980.dtsi | 63 ++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 82 ++++++++++++++++++++++++++++
 3 files changed, 234 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 59afc5592ee0..0cd44461a0bd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -704,6 +704,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77965_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77965",
 				     "renesas,etheravb-rcar-gen3";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 623ebe435417..7beb1ce99d58 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -427,6 +427,69 @@
 			};
 		};
 
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: mmu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: mmu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77980",
 				     "renesas,etheravb-rcar-gen3";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 615a0d2edffc..28eccd1d3980 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/renesas-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
 
 / {
 	compatible = "renesas,r8a77990";
@@ -210,6 +211,87 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 6/9] arm64: dts: renesas: r8a779{65, 80, 90}: Add IPMMU devices nodes
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Magnus Damm <damm+renesas@opensource.se>

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to r8a7796 however VP0
  has been added and PV1 has been removed. Also the IMSSTR
  bit assignment has been reworked.

* The r8a77980 IPMMU is quite similar to r8a77970 however VC0
  has been added. The IMSSTR bit assignment has also been
  reworked. Power domains are also quite different however the
  the documentation is rather unclear about this topic.

  Until we know better VC0 gets assigned to R8A77980_PD_ALWAYS_ON.

* The r8a77990 IPMMU is similar to r8a77995. Power domains are
  however different and the public documentation is still unclear.

  Based on preliminary information from the hardware team the R-Car E3
  SoC comes with an IPMMU-VP0 device in an Always-on power domain and
  the IPMMU-VC0 is placed as expected in the A3VC power domain.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 89 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77980.dtsi | 63 ++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 82 ++++++++++++++++++++++++++++
 3 files changed, 234 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 59afc5592ee0..0cd44461a0bd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -704,6 +704,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: mmu at e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu at e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu at e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu at ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77965_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu at e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu at ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu at fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu at ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu at fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu at febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu at fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet at e6800000 {
 			compatible = "renesas,etheravb-r8a77965",
 				     "renesas,etheravb-rcar-gen3";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 623ebe435417..7beb1ce99d58 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -427,6 +427,69 @@
 			};
 		};
 
+		ipmmu_ds1: mmu at e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: mmu at e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: mmu at e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu at ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu at e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu at ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu at fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu at febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet at e6800000 {
 			compatible = "renesas,etheravb-r8a77980",
 				     "renesas,etheravb-rcar-gen3";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 615a0d2edffc..28eccd1d3980 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/renesas-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
 
 / {
 	compatible = "renesas,r8a77990";
@@ -210,6 +211,87 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipmmu_ds0: mmu at e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu at e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu at e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu at e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu at ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu at fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu at ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu at fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu at febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu at fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet at e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 7/9] arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Takeshi Kihara, Ulrich Hecht,
	Simon Horman

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch adds the device nodes for SCIF {0,1,3,4,5} and all HSCIF serial
ports, incl. clocks, power domain and DMAs.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 118 ++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 6c0a8217d40f..fe77bc43c447 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -242,6 +242,41 @@
 			resets = <&cpg 407>;
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -605,6 +640,40 @@
 			status = "disabled";
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial@e6e88000 {
 			compatible = "renesas,scif-r8a77995",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -622,6 +691,55 @@
 			status = "disabled";
 		};
 
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a77995",
 				     "renesas,rcar-gen3-msiof";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 7/9] arm64: dts: renesas: r8a77995: Add SCIF {0, 1, 3, 4, 5} and all HSCIF device nodes
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch adds the device nodes for SCIF {0,1,3,4,5} and all HSCIF serial
ports, incl. clocks, power domain and DMAs.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 118 ++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 6c0a8217d40f..fe77bc43c447 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -242,6 +242,41 @@
 			resets = <&cpg 407>;
 		};
 
+		hscif0: serial at e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial at e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		i2c0: i2c at e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -605,6 +640,40 @@
 			status = "disabled";
 		};
 
+		scif0: serial at e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial at e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial at e6e88000 {
 			compatible = "renesas,scif-r8a77995",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -622,6 +691,55 @@
 			status = "disabled";
 		};
 
+		scif3: serial at e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial at e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial at e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
 		msiof0: spi at e6e90000 {
 			compatible = "renesas,msiof-r8a77995",
 				     "renesas,rcar-gen3-msiof";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
@ 2018-07-20 12:03 ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: arm
  Cc: linux-renesas-soc, Olof Johansson, Kevin Hilman, Arnd Bergmann,
	linux-arm-kernel, Magnus Damm, Simon Horman

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM64 based SoC DT updates for v4.19.

This pull request is based on the previous round of
such requests, tagged as renesas-arm64-dt-for-v4.19,
which I have already sent a pull-request for.


The following changes since commit 6b284a81307848b4331453b02cf7a33c09719d4b:

  arm64: dts: renesas: r8a77995: Add MSIOF device nodes (2018-06-25 15:30:39 +0200)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.19

for you to fetch changes up to 9a6c158f62ccdd37c921ec8b1484418bad5f7984:

  arm64: dts: renesas: r8a77980: add INTC-EX support (2018-07-20 13:47:34 +0200)

----------------------------------------------------------------
Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
  R-Car E3 (r8a77990) SoC

  This region does not exist on this SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices

* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC

  Nodes with #address-cells/#size-cells should have more than one child node

* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

  Addresses are assumed to be hex by dtc, thus it is not valid to use
  decimal

Enhancements:

* Describe in DT:
  - INTC-EX of R-Car V3H (r8a77980) SoC
  - USB3.0 of R-Car E3 (r8a77980) SoC
  - All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
    Previously only SCIF2, used as the debug consile, was described.
  - All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
    E3 (r8a77990) SoCs

* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board

* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

  HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
  supported range of bitrates).

----------------------------------------------------------------
Geert Uytterhoeven (3):
      arm64: dts: renesas: r8a77990: Remove non-existing STBE region
      arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
      arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1

Magnus Damm (1):
      arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Sergei Shtylyov (1):
      arm64: dts: renesas: r8a77980: add INTC-EX support

Simon Horman (1):
      arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder

Takeshi Kihara (1):
      arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes

Yoshihiro Shimoda (2):
      arm64: dts: renesas: Unify the labels for RWDT
      arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

 arch/arm64/boot/dts/renesas/r8a7795.dtsi         |   2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi         |   2 +-
 arch/arm64/boot/dts/renesas/r8a77965.dtsi        |  94 +++++++++++++++++-
 arch/arm64/boot/dts/renesas/r8a77980.dtsi        |  79 +++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts   |  12 +++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi        |  95 +++++++++++++++++-
 arch/arm64/boot/dts/renesas/r8a77995.dtsi        | 118 +++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/salvator-common.dtsi |  12 +--
 arch/arm64/boot/dts/renesas/ulcb.dtsi            |   2 +-
 9 files changed, 405 insertions(+), 11 deletions(-)

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 8/9] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Yoshihiro Shimoda, Simon Horman

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 12 ++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi      | 11 +++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 5e28c1b94b77..2bc3a4884b00 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -71,6 +71,11 @@
 		groups = "usb0_b";
 		function = "usb0";
 	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
 };
 
 &rwdt {
@@ -88,3 +93,10 @@
 
 	status = "okay";
 };
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 28eccd1d3980..ae89260baad9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -349,6 +349,17 @@
 			status = "disabled";
 		};
 
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
 		ohci0: usb@ee080000 {
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
@ 2018-07-20 12:03 ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM64 based SoC DT updates for v4.19.

This pull request is based on the previous round of
such requests, tagged as renesas-arm64-dt-for-v4.19,
which I have already sent a pull-request for.


The following changes since commit 6b284a81307848b4331453b02cf7a33c09719d4b:

  arm64: dts: renesas: r8a77995: Add MSIOF device nodes (2018-06-25 15:30:39 +0200)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.19

for you to fetch changes up to 9a6c158f62ccdd37c921ec8b1484418bad5f7984:

  arm64: dts: renesas: r8a77980: add INTC-EX support (2018-07-20 13:47:34 +0200)

----------------------------------------------------------------
Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
  R-Car E3 (r8a77990) SoC

  This region does not exist on this SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices

* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC

  Nodes with #address-cells/#size-cells should have more than one child node

* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

  Addresses are assumed to be hex by dtc, thus it is not valid to use
  decimal

Enhancements:

* Describe in DT:
  - INTC-EX of R-Car V3H (r8a77980) SoC
  - USB3.0 of R-Car E3 (r8a77980) SoC
  - All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
    Previously only SCIF2, used as the debug consile, was described.
  - All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
    E3 (r8a77990) SoCs

* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board

* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

  HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
  supported range of bitrates).

----------------------------------------------------------------
Geert Uytterhoeven (3):
      arm64: dts: renesas: r8a77990: Remove non-existing STBE region
      arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
      arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1

Magnus Damm (1):
      arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Sergei Shtylyov (1):
      arm64: dts: renesas: r8a77980: add INTC-EX support

Simon Horman (1):
      arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder

Takeshi Kihara (1):
      arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes

Yoshihiro Shimoda (2):
      arm64: dts: renesas: Unify the labels for RWDT
      arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

 arch/arm64/boot/dts/renesas/r8a7795.dtsi         |   2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi         |   2 +-
 arch/arm64/boot/dts/renesas/r8a77965.dtsi        |  94 +++++++++++++++++-
 arch/arm64/boot/dts/renesas/r8a77980.dtsi        |  79 +++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts   |  12 +++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi        |  95 +++++++++++++++++-
 arch/arm64/boot/dts/renesas/r8a77995.dtsi        | 118 +++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/salvator-common.dtsi |  12 +--
 arch/arm64/boot/dts/renesas/ulcb.dtsi            |   2 +-
 9 files changed, 405 insertions(+), 11 deletions(-)

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 8/9] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 12 ++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi      | 11 +++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 5e28c1b94b77..2bc3a4884b00 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -71,6 +71,11 @@
 		groups = "usb0_b";
 		function = "usb0";
 	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
 };
 
 &rwdt {
@@ -88,3 +93,10 @@
 
 	status = "okay";
 };
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 28eccd1d3980..ae89260baad9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -349,6 +349,17 @@
 			status = "disabled";
 		};
 
+		xhci0: usb at ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
 		ohci0: usb at ee080000 {
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 9/9] arm64: dts: renesas: r8a77980: add INTC-EX support
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-20 12:03   ` Simon Horman
  -1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Vladimir Barinov,
	Simon Horman

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Describe the INTC-EX interrupt controller in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 7beb1ce99d58..b8c9a56562f2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -234,6 +234,22 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a77980",
 				     "renesas,rcar-gen3-i2c";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 9/9] arm64: dts: renesas: r8a77980: add INTC-EX support
@ 2018-07-20 12:03   ` Simon Horman
  0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2018-07-20 12:03 UTC (permalink / raw)
  To: linux-arm-kernel

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Describe the INTC-EX interrupt controller in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 7beb1ce99d58..b8c9a56562f2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -234,6 +234,22 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller at e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
 		i2c0: i2c at e6500000 {
 			compatible = "renesas,i2c-r8a77980",
 				     "renesas,rcar-gen3-i2c";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
  2018-07-20 12:03 ` Simon Horman
@ 2018-07-21 21:38   ` Olof Johansson
  -1 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2018-07-21 21:38 UTC (permalink / raw)
  To: Simon Horman
  Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
	linux-arm-kernel, Magnus Damm

On Fri, Jul 20, 2018 at 02:03:40PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM64 based SoC DT updates for v4.19.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-arm64-dt-for-v4.19,
> which I have already sent a pull-request for.
> 
> 
> The following changes since commit 6b284a81307848b4331453b02cf7a33c09719d4b:
> 
>   arm64: dts: renesas: r8a77995: Add MSIOF device nodes (2018-06-25 15:30:39 +0200)
> 
> are available in the git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.19
> 
> for you to fetch changes up to 9a6c158f62ccdd37c921ec8b1484418bad5f7984:
> 
>   arm64: dts: renesas: r8a77980: add INTC-EX support (2018-07-20 13:47:34 +0200)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
> 
> Corrections:
> 
> * Remove non-existing STBE region from Ether-AVB node in DT of
>   R-Car E3 (r8a77990) SoC
> 
>   This region does not exist on this SoC

I think the item is clear, no need for this additional line.

> Cleanups:
> 
> * Consistently use rwdt as label for Renesas Watchdog Timer devices
> 
> * Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
> 
>   Nodes with #address-cells/#size-cells should have more than one child node

Not sure what you mean here -- it's perfectly legal to have only one child
node.

> * Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards
> 
>   Addresses are assumed to be hex by dtc, thus it is not valid to use
>   decimal

Again, the item is clear enough.

> Enhancements:
> 
> * Describe in DT:
>   - INTC-EX of R-Car V3H (r8a77980) SoC
>   - USB3.0 of R-Car E3 (r8a77980) SoC
>   - All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
>     Previously only SCIF2, used as the debug consile, was described.
>   - All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
>     E3 (r8a77990) SoCs
> 
> * Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
> 
> * Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards
> 
>   HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
>   supported range of bitrates).

Sounds good.


Merged the branch with some minor tag tweaks per above.


-Olof

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
@ 2018-07-21 21:38   ` Olof Johansson
  0 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2018-07-21 21:38 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Jul 20, 2018 at 02:03:40PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM64 based SoC DT updates for v4.19.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-arm64-dt-for-v4.19,
> which I have already sent a pull-request for.
> 
> 
> The following changes since commit 6b284a81307848b4331453b02cf7a33c09719d4b:
> 
>   arm64: dts: renesas: r8a77995: Add MSIOF device nodes (2018-06-25 15:30:39 +0200)
> 
> are available in the git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.19
> 
> for you to fetch changes up to 9a6c158f62ccdd37c921ec8b1484418bad5f7984:
> 
>   arm64: dts: renesas: r8a77980: add INTC-EX support (2018-07-20 13:47:34 +0200)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
> 
> Corrections:
> 
> * Remove non-existing STBE region from Ether-AVB node in DT of
>   R-Car E3 (r8a77990) SoC
> 
>   This region does not exist on this SoC

I think the item is clear, no need for this additional line.

> Cleanups:
> 
> * Consistently use rwdt as label for Renesas Watchdog Timer devices
> 
> * Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
> 
>   Nodes with #address-cells/#size-cells should have more than one child node

Not sure what you mean here -- it's perfectly legal to have only one child
node.

> * Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards
> 
>   Addresses are assumed to be hex by dtc, thus it is not valid to use
>   decimal

Again, the item is clear enough.

> Enhancements:
> 
> * Describe in DT:
>   - INTC-EX of R-Car V3H (r8a77980) SoC
>   - USB3.0 of R-Car E3 (r8a77980) SoC
>   - All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
>     Previously only SCIF2, used as the debug consile, was described.
>   - All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
>     E3 (r8a77990) SoCs
> 
> * Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
> 
> * Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards
> 
>   HSCIF is superior to SCIF (larger FIFOs, more accurate and wider
>   supported range of bitrates).

Sounds good.


Merged the branch with some minor tag tweaks per above.


-Olof

^ permalink raw reply	[flat|nested] 22+ messages in thread
end of thread, other threads:[~2018-07-21 23:19 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-20 12:03 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19 Simon Horman
2018-07-20 12:03 ` Simon Horman
2018-07-20 12:03 ` [PATCH 1/9] arm64: dts: renesas: r8a77990: Remove non-existing STBE region Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 2/9] arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 3/9] arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 4/9] arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1 Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 5/9] arm64: dts: renesas: Unify the labels for RWDT Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 6/9] arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes Simon Horman
2018-07-20 12:03   ` [PATCH 6/9] arm64: dts: renesas: r8a779{65, 80, 90}: " Simon Horman
2018-07-20 12:03 ` [PATCH 7/9] arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes Simon Horman
2018-07-20 12:03   ` [PATCH 7/9] arm64: dts: renesas: r8a77995: Add SCIF {0, 1, 3, 4, 5} " Simon Horman
2018-07-20 12:03 ` [PATCH 8/9] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-20 12:03 ` [PATCH 9/9] arm64: dts: renesas: r8a77980: add INTC-EX support Simon Horman
2018-07-20 12:03   ` Simon Horman
2018-07-21 21:38 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19 Olof Johansson
2018-07-21 21:38   ` Olof Johansson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.