All of lore.kernel.org
 help / color / mirror / Atom feed
* desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf
@ 2018-09-10 15:44 David Poole
  2018-09-10 17:27 ` Lorenzo Bianconi
  0 siblings, 1 reply; 5+ messages in thread
From: David Poole @ 2018-09-10 15:44 UTC (permalink / raw)
  To: linux-wireless; +Cc: dpoole


[-- Attachment #1.1: Type: text/plain, Size: 1682 bytes --]

Start wpa_supplicant
Attach to a Cisco AP (haven't tried too many other APs yet). Desktop
locks up hard.  I have some shell scripts I use start wpa_supp and run
wpa_cli (I'm not going through the GNOME ui or other).

(Occurs to me I need to verify I didn't have the system's
wpa_supplicant running... I forget to kill the systemd started wpa_supp
before starting mine.)

Captured a kernel oops (attached) with netconsole. Same kernel with my
2nd wifi (an Intel 8265 PCI-e card) works. 

Running:
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-
testing.git   72d1e548defbf75c6bb42fc99276cd88fda7dda0


I can 'iw dev scan' & scan through wpa_supplicant with the card fairly
successfully. I haven't tried monitor mode. Have recreated the oops a
couple times.


Alfa AWUSB036ACM 

Bus 001 Device 004: ID 0e8d:7612 MediaTek Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0e8d MediaTek Inc.
  idProduct          0x7612 
  bcdDevice            1.00
  iManufacturer           2 MediaTek Inc.
  iProduct                3 Wireless 
  iSerial                 4 000000000

phy#0
	Interface wlp0s20f0u1u2
		ifindex 5
		wdev 0x1
		addr 00:c0:ca:95:78:45
		type managed
		txpower 24.00 dBm
phy#1
	Unnamed/non-netdev interface
		wdev 0x100000002
		addr 60:f6:77:b0:21:e3
		type P2P-device
		txpower 0.00 dBm
	Interface wlp2s0
		ifindex 4
		wdev 0x100000001
		addr 60:f6:77:b0:21:e2
		type managed
		txpower 0.00 dBm




[-- Attachment #1.2: kernel-panic.txt --]
[-- Type: text/plain, Size: 14903 bytes --]

[  546.841947] wlp0s20f0u1u2: authenticate with c4:b9:cd:dc:48:40
[  547.140202] wlp0s20f0u1u2: send auth to c4:b9:cd:dc:48:40 (try 1/3)
[  547.140226] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[  547.140228] PGD 800000083e025067 P4D 800000083e025067 PUD 83e072067 PMD 0
[  547.140233] Oops: 0000 [#1] SMP PTI
[  547.140236] CPU: 2 PID: 2503 Comm: wpa_supplicant Not tainted 4.19.0-rc2-wt #1
[  547.140238] Hardware name: Shuttle Inc. SZ170/FZ170, BIOS 2.09 08/01/2017
[  547.140258] RIP: 0010:ieee80211_wake_txqs+0x1e3/0x3d0 [mac80211]
[  547.140261] Code: 4c 89 fe 4c 89 ef 48 8b 92 b0 02 00 00 e8 45 d6 2e f4 48 8b 3c 24 e8 0c bc 00 f4 48 83 c5 08 48 3b 6c 24 08 74 a0 4c 8b 7d 00 <41> 0f b6 57 11 3b 54 24 18 75 e6 4d 8d a7 28 ff ff ff f0 49 0f ba
[  547.140263] RSP: 0018:ffff95038ea83ed0 EFLAGS: 00010293
[  547.140265] RAX: ffff95038419e978 RBX: ffff95038419e000 RCX: ffff950384b18760
[  547.140267] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff950384b18828
[  547.140269] RBP: ffff95038419e970 R08: 00039e862fcdb16e R09: ffff95038a9b4230
[  547.140271] R10: 0000000000000420 R11: ffffb8efc46c78d0 R12: ffff9503798251d0
[  547.140273] R13: ffff950384b18760 R14: 0000000000000000 R15: 0000000000000000
[  547.140275] FS:  00007f42ed60cdc0(0000) GS:ffff95038ea80000(0000) knlGS:0000000000000000
[  547.140277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  547.140279] CR2: 0000000000000011 CR3: 0000000835b30001 CR4: 00000000003606e0
[  547.140281] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  547.140283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  547.140284] Call Trace:
[  547.140287]  <IRQ>
[  547.140293]  tasklet_action_common.isra.17+0x5a/0x100
[  547.140297]  __do_softirq+0xe4/0x2d9
[  547.140300]  do_softirq_own_stack+0x2a/0x40
[  547.140302]  </IRQ>
[  547.140305]  do_softirq.part.15+0x4f/0x60
[  547.140307]  __local_bh_enable_ip+0x4b/0x50
[  547.140322]  ieee80211_auth.cold.39+0xec/0x127 [mac80211]
[  547.140336]  ieee80211_mgd_auth.cold.49+0xfc/0x126 [mac80211]
[  547.140354]  cfg80211_mlme_auth+0x125/0x230 [cfg80211]
[  547.140368]  nl80211_authenticate+0x2f1/0x360 [cfg80211]
[  547.140373]  genl_family_rcv_msg+0x1ca/0x3a0
[  547.140377]  ? schedule+0x28/0x80
[  547.140380]  ? schedule_preempt_disabled+0xa/0x10
[  547.140382]  ? __mutex_lock.isra.5+0x1be/0x490
[  547.140385]  genl_rcv_msg+0x47/0x8c
[  547.140389]  ? __kmalloc_node_track_caller+0x1df/0x2a0
[  547.140391]  ? genl_family_rcv_msg+0x3a0/0x3a0
[  547.140394]  netlink_rcv_skb+0x4c/0x120
[  547.140397]  genl_rcv+0x24/0x40
[  547.140399]  netlink_unicast+0x19e/0x260
[  547.140401]  netlink_sendmsg+0x1ff/0x3c0
[  547.140405]  sock_sendmsg+0x36/0x40
[  547.140408]  ___sys_sendmsg+0x295/0x2f0
[  547.140412]  ? __wake_up_common_lock+0x89/0xc0
[  547.140415]  ? tty_write+0x1e8/0x300
[  547.140418]  ? process_echoes+0x60/0x60
[  547.140421]  __sys_sendmsg+0x57/0xa0
[  547.140425]  do_syscall_64+0x5b/0x160
[  547.140428]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  547.140431] RIP: 0033:0x7f42ec2412b4
[  547.140434] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 31 37 2c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
[  547.140436] RSP: 002b:00007ffc14f331f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  547.140438] RAX: ffffffffffffffda RBX: 0000000000f715b0 RCX: 00007f42ec2412b4
[  547.140440] RDX: 0000000000000000 RSI: 00007ffc14f33230 RDI: 0000000000000005
[  547.140442] RBP: 0000000000f96650 R08: 0000000000000000 R09: 000000000000000d
[  547.140443] R10: 0000000000f6f010 R11: 0000000000000246 R12: 0000000000f714c0
[  547.140445] R13: 00007ffc14f33230 R14: 0000000000000000 R15: 0000000000f736e0
[  547.140447] Modules linked in: cdc_ether usbnet r8152 mii netconsole devlink ipt_MASQUERADE xt_addrtype ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack br_netfilter ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables overlay sunrpc arc4 iwlmvm mt76x2u mt76x2_common mt76x02_lib mt76_usb mt76 mac80211 intel_rapl iwlwifi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm cfg80211 irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore intel_rapl_perf ftdi_sio mei_me rfkill
[  547.140480]  pcspkr mei i2c_i801 intel_pch_thermal pcc_cpufreq acpi_pad i915 drm_kms_helper igb dca drm e1000e crc32c_intel i2c_algo_bit video
[  547.140489] CR2: 0000000000000011
[  547.140493] ---[ end trace 2c7e652fb301c0d1 ]---
[  547.140510] RIP: 0010:ieee80211_wake_txqs+0x1e3/0x3d0 [mac80211]
[  547.140512] Code: 4c 89 fe 4c 89 ef 48 8b 92 b0 02 00 00 e8 45 d6 2e f4 48 8b 3c 24 e8 0c bc 00 f4 48 83 c5 08 48 3b 6c 24 08 74 a0 4c 8b 7d 00 <41> 0f b6 57 11 3b 54 24 18 75 e6 4d 8d a7 28 ff ff ff f0 49 0f ba
[  547.140514] RSP: 0018:ffff95038ea83ed0 EFLAGS: 00010293
[  547.140516] RAX: ffff95038419e978 RBX: ffff95038419e000 RCX: ffff950384b18760
[  547.140518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff950384b18828
[  547.140520] RBP: ffff95038419e970 R08: 00039e862fcdb16e R09: ffff95038a9b4230
[  547.140521] R10: 0000000000000420 R11: ffffb8efc46c78d0 R12: ffff9503798251d0
[  547.140523] R13: ffff950384b18760 R14: 0000000000000000 R15: 0000000000000000
[  547.140525] FS:  00007f42ed60cdc0(0000) GS:ffff95038ea80000(0000) knlGS:0000000000000000
[  547.140527] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  547.140528] CR2: 0000000000000011 CR3: 0000000835b30001 CR4: 00000000003606e0
[  547.140530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  547.140532] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  547.140534] Kernel panic - not syncing: Fatal exception in interrupt
[  547.140570] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  547.140574] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
[  547.140583] WARNING: CPU: 2 PID: 2503 at kernel/sched/core.c:1163 set_task_cpu+0x15e/0x170
[  547.140584] Modules linked in: cdc_ether usbnet r8152 mii netconsole devlink ipt_MASQUERADE xt_addrtype ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack br_netfilter ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables overlay sunrpc arc4 iwlmvm mt76x2u mt76x2_common mt76x02_lib mt76_usb mt76 mac80211 intel_rapl iwlwifi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm cfg80211 irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore intel_rapl_perf ftdi_sio mei_me rfkill
[  547.140609]  pcspkr mei i2c_i801 intel_pch_thermal pcc_cpufreq acpi_pad i915 drm_kms_helper igb dca drm e1000e crc32c_intel i2c_algo_bit video
[  547.140617] CPU: 2 PID: 2503 Comm: wpa_supplicant Tainted: G      D           4.19.0-rc2-wt #1
[  547.140619] Hardware name: Shuttle Inc. SZ170/FZ170, BIOS 2.09 08/01/2017
[  547.140621] RIP: 0010:set_task_cpu+0x15e/0x170
[  547.140623] Code: 20 30 e1 b4 0f 85 fd fe ff ff f7 43 60 fd ff ff ff 0f 84 f0 fe ff ff 0f 0b e9 e9 fe ff ff 80 8b 6c 04 00 00 04 e9 31 ff ff ff <0f> 0b e9 e7 fe ff ff 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00
[  547.140625] RSP: 0018:ffff95038ea83890 EFLAGS: 00010006
[  547.140627] RAX: 0000000000000200 RBX: ffff9503780c9ec0 RCX: 0000000000000040
[  547.140628] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff9503780c9ec0
[  547.140630] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000002
[  547.140632] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9503780ca624
[  547.140634] R13: 0000000000000003 R14: 0000000000000046 R15: 0000000000020f80
[  547.140639] FS:  00007f42ed60cdc0(0000) GS:ffff95038ea80000(0000) knlGS:0000000000000000
[  547.140641] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  547.140643] CR2: 0000000000000011 CR3: 0000000835b30001 CR4: 00000000003606e0
[  547.140645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  547.140647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  547.140648] Call Trace:
[  547.140650]  <IRQ>
[  547.140653]  try_to_wake_up+0x16b/0x490
[  547.140656]  __wake_up_common+0x7a/0x190
[  547.140660]  ep_poll_callback+0xc8/0x2d0
[  547.140664]  __wake_up_common+0x7a/0x190
[  547.140666]  __wake_up_common_lock+0x7c/0xc0
[  547.140670]  ? tick_sched_do_timer+0x70/0x70
[  547.140673]  irq_work_run_list+0x4d/0x70
[  547.140677]  update_process_times+0x4a/0x60
[  547.140679]  tick_sched_handle+0x22/0x60
[  547.140682]  tick_sched_timer+0x37/0x70
[  547.140685]  __hrtimer_run_queues+0x100/0x280
[  547.140688]  hrtimer_interrupt+0x100/0x220
[  547.140691]  smp_apic_timer_interrupt+0x6a/0x130
[  547.140693]  apic_timer_interrupt+0xf/0x20
[  547.140697] RIP: 0010:panic+0x201/0x247
[  547.140698] Code: eb a6 83 3d cf cf 8c 01 00 74 05 e8 98 49 02 00 48 c7 c6 00 e2 97 b5 48 c7 c7 c0 63 0b b5 e8 53 22 06 00 fb 66 0f 1f 44 00 00 <31> db e8 f7 61 0c 00 4c 39 eb 7c 1d 41 83 f4 01 48 8b 05 77 cf 8c
[  547.140700] RSP: 0018:ffff95038ea83c90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[  547.140702] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006
[  547.140704] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff95038ea96860
[  547.140706] RBP: ffff95038ea83d00 R08: 0000000000000000 R09: ffff950373dd08c0
[  547.140707] R10: 0000000000000000 R11: 0000000839df6c02 R12: 0000000000000000
[  547.140709] R13: 0000000000000000 R14: 0000000000000009 R15: 0000000000000001
[  547.140711]  ? apic_timer_interrupt+0xa/0x20
[  547.140715]  oops_end.cold.9+0xc/0x18
[  547.140719]  no_context+0x1be/0x3a0
[  547.140723]  __do_page_fault+0xd1/0x4e0
[  547.140726]  do_page_fault+0x32/0x110
[  547.140728]  page_fault+0x1e/0x30
[  547.140743] RIP: 0010:ieee80211_wake_txqs+0x1e3/0x3d0 [mac80211]
[  547.140745] Code: 4c 89 fe 4c 89 ef 48 8b 92 b0 02 00 00 e8 45 d6 2e f4 48 8b 3c 24 e8 0c bc 00 f4 48 83 c5 08 48 3b 6c 24 08 74 a0 4c 8b 7d 00 <41> 0f b6 57 11 3b 54 24 18 75 e6 4d 8d a7 28 ff ff ff f0 49 0f ba
[  547.140747] RSP: 0018:ffff95038ea83ed0 EFLAGS: 00010293
[  547.140749] RAX: ffff95038419e978 RBX: ffff95038419e000 RCX: ffff950384b18760
[  547.140751] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff950384b18828
[  547.140753] RBP: ffff95038419e970 R08: 00039e862fcdb16e R09: ffff95038a9b4230
[  547.140754] R10: 0000000000000420 R11: ffffb8efc46c78d0 R12: ffff9503798251d0
[  547.140756] R13: ffff950384b18760 R14: 0000000000000000 R15: 0000000000000000
[  547.140760]  tasklet_action_common.isra.17+0x5a/0x100
[  547.140763]  __do_softirq+0xe4/0x2d9
[  547.140765]  do_softirq_own_stack+0x2a/0x40
[  547.140767]  </IRQ>
[  547.140770]  do_softirq.part.15+0x4f/0x60
[  547.140772]  __local_bh_enable_ip+0x4b/0x50
[  547.140786]  ieee80211_auth.cold.39+0xec/0x127 [mac80211]
[  547.140800]  ieee80211_mgd_auth.cold.49+0xfc/0x126 [mac80211]
[  547.140814]  cfg80211_mlme_auth+0x125/0x230 [cfg80211]
[  547.140828]  nl80211_authenticate+0x2f1/0x360 [cfg80211]
[  547.140831]  genl_family_rcv_msg+0x1ca/0x3a0
[  547.140834]  ? schedule+0x28/0x80
[  547.140837]  ? schedule_preempt_disabled+0xa/0x10
[  547.140839]  ? __mutex_lock.isra.5+0x1be/0x490
[  547.140842]  genl_rcv_msg+0x47/0x8c
[  547.140845]  ? __kmalloc_node_track_caller+0x1df/0x2a0
[  547.140847]  ? genl_family_rcv_msg+0x3a0/0x3a0
[  547.140849]  netlink_rcv_skb+0x4c/0x120
[  547.140852]  genl_rcv+0x24/0x40
[  547.140854]  netlink_unicast+0x19e/0x260
[  547.140857]  netlink_sendmsg+0x1ff/0x3c0
[  547.140861]  sock_sendmsg+0x36/0x40
[  547.140864]  ___sys_sendmsg+0x295/0x2f0
[  547.140867]  ? __wake_up_common_lock+0x89/0xc0
[  547.140870]  ? tty_write+0x1e8/0x300
[  547.140872]  ? process_echoes+0x60/0x60
[  547.140875]  __sys_sendmsg+0x57/0xa0
[  547.140878]  do_syscall_64+0x5b/0x160
[  547.140882]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  547.140884] RIP: 0033:0x7f42ec2412b4
[  547.140886] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 31 37 2c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
[  547.140890] RAX: ffffffffffffffda RBX: 0000000000f715b0 RCX: 00007f42ec2412b4
[  547.140891] RDX: 0000000000000000 RSI: 00007ffc14f33230 RDI: 0000000000000005
[  547.140893] RBP: 0000000000f96650 R08: 0000000000000000 R09: 000000000000000d
[  547.140895] R10: 0000000000f6f010 R11: 0000000000000246 R12: 0000000000f714c0
[  547.140897] R13: 00007ffc14f33230 R14: 0000000000000000 R15: 0000000000f736e0
[  547.140900] ---[ end trace 2c7e652fb301c0d2 ]---
[  547.140904] ------------[ cut here ]------------
[  547.140912] Modules linked in: cdc_ether usbnet r8152 mii netconsole devlink ipt_MASQUERADE xt_addrtype ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack br_netfilter ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables overlay sunrpc arc4 iwlmvm mt76x2u mt76x2_common mt76x02_lib mt76_usb mt76 mac80211 intel_rapl iwlwifi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm cfg80211 irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore intel_rapl_perf ftdi_sio mei_me rfkill
[  547.140937]  pcspkr mei i2c_i801 intel_pch_thermal pcc_cpufreq acpi_pad i915 drm_kms_helper igb dca drm e1000e crc32c_intel i2c_algo_bit video
[  547.140944] CPU: 2 PID: 2503 Comm: wpa_supplicant Tainted: G      D W         4.19.0-rc2-wt #1
[  547.140948] RIP: 0010:native_smp_send_reschedule+0x34/0x40
[  547.140954] RAX: 0000000000000000 RBX: ffff95038eae0f80 RCX: 0000000000000006
[  547.140956] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff95038ea96860
[  547.140957] RBP: ffff9503780c9ec0 R08: 0000000000000000 R09: ffff950373dd08c0
[  547.140959] R10: 0000000000000000 R11: 00000008344f1202 R12: ffff9503780ca624
[  547.140961] R13: ffff95038ea838c8 R14: 0000000000000046 R15: 0000000000020f80
[  547.140963] FS:  00007f42ed60cdc0(0000) GS:ffff95038ea80000(0000) knlGS:0000000000000000
[  547.140970] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400


^C
...arthurdent:~%

[-- Attachment #1.3: phy-info.txt --]
[-- Type: text/plain, Size: 6366 bytes --]

Wiphy phy0
	max # scan SSIDs: 4
	max scan IEs length: 2243 bytes
	max # sched scan SSIDs: 0
	max # match sets: 0
	max # scan plans: 1
	max scan plan interval: -1
	max scan plan iterations: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports RSN-IBSS.
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP-128 (00-0f-ac:4)
		* CCMP-256 (00-0f-ac:10)
		* GCMP-128 (00-0f-ac:8)
		* GCMP-256 (00-0f-ac:9)
		* CMAC (00-0f-ac:6)
		* CMAC-256 (00-0f-ac:13)
		* GMAC-128 (00-0f-ac:11)
		* GMAC-256 (00-0f-ac:12)
	Available Antennas: TX 0x3 RX 0x3
	Supported interface modes:
		 * managed
		 * monitor
	Band 1:
		Capabilities: 0x1ff
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX Greenfield
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			No DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT TX/RX MCS rate indexes supported: 0-15
		Bitrates (non-HT):
			* 1.0 Mbps (short preamble supported)
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (24.0 dBm)
			* 2417 MHz [2] (24.0 dBm)
			* 2422 MHz [3] (24.0 dBm)
			* 2427 MHz [4] (24.0 dBm)
			* 2432 MHz [5] (24.0 dBm)
			* 2437 MHz [6] (24.0 dBm)
			* 2442 MHz [7] (24.0 dBm)
			* 2447 MHz [8] (24.0 dBm)
			* 2452 MHz [9] (24.0 dBm)
			* 2457 MHz [10] (24.0 dBm)
			* 2462 MHz [11] (24.0 dBm)
			* 2467 MHz [12] (disabled)
			* 2472 MHz [13] (disabled)
			* 2484 MHz [14] (disabled)
	Band 2:
		Capabilities: 0x1ff
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX Greenfield
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			No DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT TX/RX MCS rate indexes supported: 0-15
		VHT Capabilities (0x018001b0):
			Max MPDU length: 3895
			Supported Channel Width: neither 160 nor 80+80
			RX LDPC
			short GI (80 MHz)
			TX STBC
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (22.0 dBm)
			* 5200 MHz [40] (22.0 dBm)
			* 5220 MHz [44] (23.0 dBm)
			* 5240 MHz [48] (23.0 dBm)
			* 5260 MHz [52] (22.0 dBm) (radar detection)
			* 5280 MHz [56] (22.0 dBm) (radar detection)
			* 5300 MHz [60] (22.0 dBm) (radar detection)
			* 5320 MHz [64] (22.0 dBm) (radar detection)
			* 5500 MHz [100] (23.0 dBm) (radar detection)
			* 5520 MHz [104] (23.0 dBm) (radar detection)
			* 5540 MHz [108] (22.0 dBm) (radar detection)
			* 5560 MHz [112] (22.0 dBm) (radar detection)
			* 5580 MHz [116] (22.0 dBm) (radar detection)
			* 5600 MHz [120] (22.0 dBm) (radar detection)
			* 5620 MHz [124] (22.0 dBm) (radar detection)
			* 5640 MHz [128] (22.0 dBm) (radar detection)
			* 5660 MHz [132] (22.0 dBm) (radar detection)
			* 5680 MHz [136] (22.0 dBm) (radar detection)
			* 5700 MHz [140] (22.0 dBm) (radar detection)
			* 5745 MHz [149] (22.0 dBm)
			* 5765 MHz [153] (22.0 dBm)
			* 5785 MHz [157] (23.0 dBm)
			* 5805 MHz [161] (23.0 dBm)
			* 5825 MHz [165] (23.0 dBm)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * new_mpath
		 * set_mesh_config
		 * set_bss
		 * authenticate
		 * associate
		 * deauthenticate
		 * disassociate
		 * join_ibss
		 * join_mesh
		 * set_tx_bitrate_mask
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * set_wds_peer
		 * probe_client
		 * set_noack_map
		 * register_beacons
		 * start_p2p_device
		 * set_mcast_rate
		 * connect
		 * disconnect
		 * set_qos_map
		 * set_multicast_to_unicast
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0x40 0xb0 0xc0 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * mesh point: 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-device: 0x40 0xd0
	software interface modes (can always be added):
		 * monitor
	interface combinations are not supported
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
	Device supports TX status socket option.
	Device supports HT-IBSS.
	Device supports SAE with AUTHENTICATE command
	Device supports low priority scan.
	Device supports scan flush.
	Device supports AP scan.
	Device supports per-vif TX power setting
	Driver supports full state transitions for AP/GO clients
	Driver supports a userspace MPM
	Device supports active monitor (which will ACK incoming frames)
	Device supports configuring vdev MAC-addr on create.

[-- Attachment #1.4: dmsg.log --]
[-- Type: text/x-log, Size: 64845 bytes --]

[    0.000000] microcode: microcode updated early to revision 0x8e, date = 2018-03-24
[    0.000000] Linux version 4.19.0-rc2-wt (dpoole@trillian) (gcc version 8.1.1 20180712 (Red Hat 8.1.1-5) (GCC)) #1 SMP Fri Sep 7 09:03:51 MDT 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-rc2-wt root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000084159fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008415a000-0x000000008415afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008415b000-0x000000008415bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008415c000-0x0000000089cf3fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000089cf4000-0x000000008a7d5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008a7d6000-0x000000008a953fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a954000-0x000000008afe4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008afe5000-0x000000008b3fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008b3fe000-0x000000008b3fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008b3ff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Shuttle Inc. SZ170/FZ170, BIOS 2.09 08/01/2017
[    0.000000] tsc: Detected 4200.000 MHz processor
[    0.001180] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001181] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001185] last_pfn = 0x86f000 max_arch_pfn = 0x400000000
[    0.001188] MTRR default type: write-back
[    0.001188] MTRR fixed ranges enabled:
[    0.001189]   00000-9FFFF write-back
[    0.001189]   A0000-BFFFF uncachable
[    0.001190]   C0000-FFFFF write-protect
[    0.001190] MTRR variable ranges enabled:
[    0.001191]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.001192]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.001192]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.001192]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.001193]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.001193]   5 disabled
[    0.001193]   6 disabled
[    0.001193]   7 disabled
[    0.001194]   8 disabled
[    0.001194]   9 disabled
[    0.001951] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002051] last_pfn = 0x8b3ff max_arch_pfn = 0x400000000
[    0.006734] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [(____ptrval____)]
[    0.006769] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[    0.006771] Using GB pages for direct mapping
[    0.006772] BRK [0x3e8a84000, 0x3e8a84fff] PGTABLE
[    0.006773] BRK [0x3e8a85000, 0x3e8a85fff] PGTABLE
[    0.006774] BRK [0x3e8a86000, 0x3e8a86fff] PGTABLE
[    0.006795] BRK [0x3e8a87000, 0x3e8a87fff] PGTABLE
[    0.006797] BRK [0x3e8a88000, 0x3e8a88fff] PGTABLE
[    0.006888] BRK [0x3e8a89000, 0x3e8a89fff] PGTABLE
[    0.006911] BRK [0x3e8a8a000, 0x3e8a8afff] PGTABLE
[    0.006985] BRK [0x3e8a8b000, 0x3e8a8bfff] PGTABLE
[    0.007018] BRK [0x3e8a8c000, 0x3e8a8cfff] PGTABLE
[    0.007019] BRK [0x3e8a8d000, 0x3e8a8dfff] PGTABLE
[    0.007050] BRK [0x3e8a8e000, 0x3e8a8efff] PGTABLE
[    0.007087] RAMDISK: [mem 0x2cafa000-0x32574fff]
[    0.007103] ACPI: Early table checksum verification disabled
[    0.007127] ACPI: RSDP 0x00000000000F05B0 000024 (v02 Shuttl)
[    0.007129] ACPI: XSDT 0x000000008AC540B0 0000E4 (v01 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007132] ACPI: FACP 0x000000008AC7B3D8 000114 (v06 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007135] ACPI: DSDT 0x000000008AC54230 0271A6 (v02 SZ170R SZ170V10 01072009 INTL 20160422)
[    0.007136] ACPI: FACS 0x000000008AFE4C40 000040
[    0.007138] ACPI: APIC 0x000000008AC7B4F0 0000BC (v03 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007139] ACPI: FPDT 0x000000008AC7B5B0 000044 (v01 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007141] ACPI: MCFG 0x000000008AC7B5F8 00003C (v01 Shuttl Shuttle  01072009 MSFT 00000097)
[    0.007142] ACPI: SSDT 0x000000008AC7B638 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.007144] ACPI: FIDT 0x000000008AC7B9F8 00009C (v01 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007145] ACPI: SLIC 0x000000008AC7BA98 000176 (v01 Shuttl Shuttle  01072009 AMI  00010013)
[    0.007147] ACPI: SSDT 0x000000008AC7BC10 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.007148] ACPI: SSDT 0x000000008AC7ED70 0026E8 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.007150] ACPI: HPET 0x000000008AC81458 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.007151] ACPI: SSDT 0x000000008AC81490 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.007153] ACPI: SSDT 0x000000008AC82278 000A2E (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.007154] ACPI: UEFI 0x000000008AC82CA8 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.007156] ACPI: SSDT 0x000000008AC82CF0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.007157] ACPI: LPIT 0x000000008AC83BD0 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.007159] ACPI: WSMT 0x000000008AC83C68 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.007160] ACPI: SSDT 0x000000008AC83C90 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.007161] ACPI: SSDT 0x000000008AC83DD8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.007163] ACPI: SSDT 0x000000008AC84078 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.007165] ACPI: SSDT 0x000000008AC87080 000215 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.007166] ACPI: DBGP 0x000000008AC87298 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.007168] ACPI: DBG2 0x000000008AC872D0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.007169] ACPI: DMAR 0x000000008AC87328 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.007170] ACPI: ASF! 0x000000008AC873D0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.007176] ACPI: Local APIC address 0xfee00000
[    0.007318] No NUMA configuration found
[    0.007319] Faking a node at [mem 0x0000000000000000-0x000000086effffff]
[    0.007325] NODE_DATA(0) allocated [mem 0x86efd5000-0x86effffff]
[    0.023885] Zone ranges:
[    0.023887]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.023888]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.023889]   Normal   [mem 0x0000000100000000-0x000000086effffff]
[    0.023889]   Device   empty
[    0.023890] Movable zone start for each node
[    0.023892] Early memory node ranges
[    0.023892]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.023893]   node   0: [mem 0x0000000000100000-0x0000000084159fff]
[    0.023893]   node   0: [mem 0x000000008415c000-0x0000000089cf3fff]
[    0.023893]   node   0: [mem 0x000000008a7d6000-0x000000008a953fff]
[    0.023894]   node   0: [mem 0x000000008b3fe000-0x000000008b3fefff]
[    0.023894]   node   0: [mem 0x0000000100000000-0x000000086effffff]
[    0.024123] Reserved but unavailable: 25076 pages
[    0.024125] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
[    0.024126] On node 0 totalpages: 8359436
[    0.024127]   DMA zone: 64 pages used for memmap
[    0.024127]   DMA zone: 21 pages reserved
[    0.024127]   DMA zone: 3995 pages, LIFO batch:0
[    0.024178]   DMA32 zone: 8762 pages used for memmap
[    0.024179]   DMA32 zone: 560753 pages, LIFO batch:63
[    0.032097]   Normal zone: 121792 pages used for memmap
[    0.032097]   Normal zone: 7794688 pages, LIFO batch:63
[    0.126001] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.126260] ACPI: PM-Timer IO Port: 0x1808
[    0.126261] ACPI: Local APIC address 0xfee00000
[    0.126266] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.126266] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.126266] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.126267] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.126267] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.126267] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.126267] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.126268] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.126304] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.126305] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.126305] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.126306] ACPI: IRQ0 used by override.
[    0.126306] ACPI: IRQ9 used by override.
[    0.126308] Using ACPI (MADT) for SMP configuration information
[    0.126308] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.126310] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.126320] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.126321] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.126321] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.126322] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.126322] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.126323] PM: Registered nosave memory: [mem 0x8415a000-0x8415afff]
[    0.126323] PM: Registered nosave memory: [mem 0x8415b000-0x8415bfff]
[    0.126324] PM: Registered nosave memory: [mem 0x89cf4000-0x8a7d5fff]
[    0.126324] PM: Registered nosave memory: [mem 0x8a954000-0x8afe4fff]
[    0.126325] PM: Registered nosave memory: [mem 0x8afe5000-0x8b3fdfff]
[    0.126325] PM: Registered nosave memory: [mem 0x8b3ff000-0x8fffffff]
[    0.126326] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.126326] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.126326] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.126326] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.126327] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.126327] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.126327] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.126327] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.126328] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.126328] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.126328] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.126328] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.126330] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.126330] Booting paravirtualized kernel on bare hardware
[    0.126332] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.194995] random: get_random_bytes called from start_kernel+0x93/0x52e with crng_init=0
[    0.194998] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.195102] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[    0.195105] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.195106] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.195117] Built 1 zonelists, mobility grouping on.  Total pages: 8228797
[    0.195117] Policy zone: Normal
[    0.195118] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-rc2-wt root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
[    0.250245] Memory: 32725684K/33437744K available (12300K kernel code, 1502K rwdata, 3936K rodata, 2140K init, 1276K bss, 712060K reserved, 0K cma-reserved)
[    0.250299] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.250302] Kernel/User page tables isolation: enabled
[    0.255575] ftrace: allocating 38281 entries in 150 pages
[    0.264775] rcu: Hierarchical RCU implementation.
[    0.264776] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.264776] 	Tasks RCU enabled.
[    0.264777] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.266229] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[    0.266427] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.268846] Console: colour VGA+ 80x25
[    0.271759] console [tty0] enabled
[    0.271768] ACPI: Core revision 20180810
[    0.272020] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.272050] hpet clockevent registered
[    0.272088] APIC: Switch to symmetric I/O mode setup
[    0.272090] DMAR: Host address width 39
[    0.272090] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.272093] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.272094] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.272096] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.272096] DMAR: RMRR base: 0x0000008a13a000 end: 0x0000008a159fff
[    0.272097] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.272098] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.272098] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.272099] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.273580] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.273581] x2apic enabled
[    0.273593] Switched APIC routing to cluster x2apic.
[    0.277637] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.282068] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
[    0.282076] Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=4200000)
[    0.282077] pid_max: default: 32768 minimum: 301
[    0.282094] Security Framework initialized
[    0.282095] Yama: becoming mindful.
[    0.282097] SELinux:  Initializing.
[    0.284792] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.286123] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.286170] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.286211] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.286329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.286329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.286333] mce: CPU supports 10 MCE banks
[    0.286338] CPU0: Thermal monitoring enabled (TM1)
[    0.286350] process: using mwait in idle threads
[    0.286351] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.286351] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.286352] Spectre V2 : Mitigation: Full generic retpoline
[    0.286353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.286353] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.286353] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.286354] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.289909] Freeing SMP alternatives memory: 36K
[    0.291132] TSC deadline timer enabled
[    0.291137] smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.291184] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.291203] ... version:                4
[    0.291203] ... bit width:              48
[    0.291203] ... generic registers:      4
[    0.291204] ... value mask:             0000ffffffffffff
[    0.291204] ... max period:             00007fffffffffff
[    0.291205] ... fixed-purpose events:   3
[    0.291205] ... event mask:             000000070000000f
[    0.291227] rcu: Hierarchical SRCU implementation.
[    0.291853] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.291888] smp: Bringing up secondary CPUs ...
[    0.291926] x86: Booting SMP configuration:
[    0.291927] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.297323] smp: Brought up 1 node, 8 CPUs
[    0.297323] smpboot: Max logical packages: 1
[    0.297323] smpboot: Total of 8 processors activated (67200.00 BogoMIPS)
[    0.298553] devtmpfs: initialized
[    0.298553] x86/mm: Memory block size: 128MB
[    0.299658] PM: Registering ACPI NVS region [mem 0x8415a000-0x8415afff] (4096 bytes)
[    0.299658] PM: Registering ACPI NVS region [mem 0x8a954000-0x8afe4fff] (6885376 bytes)
[    0.299658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.299658] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.299658] pinctrl core: initialized pinctrl subsystem
[    0.299658] RTC time: 15:28:31, date: 09/10/18
[    0.299658] NET: Registered protocol family 16
[    0.300100] audit: initializing netlink subsys (disabled)
[    0.300103] audit: type=2000 audit(1536593311.029:1): state=initialized audit_enabled=0 res=1
[    0.300113] cpuidle: using governor menu
[    0.300132] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.300132] ACPI: bus type PCI registered
[    0.300132] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.300132] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.300133] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.300140] PCI: Using configuration type 1 for base access
[    0.301184] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.301184] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.301184] cryptd: max_cpu_qlen set to 1000
[    0.301184] ACPI: Added _OSI(Module Device)
[    0.301184] ACPI: Added _OSI(Processor Device)
[    0.301184] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.301184] ACPI: Added _OSI(Processor Aggregator Device)
[    0.301184] ACPI: Added _OSI(Linux-Dell-Video)
[    0.301184] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.324897] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.328644] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.331070] ACPI: Dynamic OEM Table Load:
[    0.331074] ACPI: SSDT 0xFFFF90B20E453000 00081F (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.331364] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.332431] ACPI: Dynamic OEM Table Load:
[    0.332433] ACPI: SSDT 0xFFFF90B20A54CC00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.332687] ACPI: Dynamic OEM Table Load:
[    0.332690] ACPI: SSDT 0xFFFF90B20A49EE00 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.332869] ACPI: Dynamic OEM Table Load:
[    0.332871] ACPI: SSDT 0xFFFF90B20A49EC00 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.333227] ACPI: Dynamic OEM Table Load:
[    0.333231] ACPI: SSDT 0xFFFF90B20A445000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.333600] ACPI: Dynamic OEM Table Load:
[    0.333603] ACPI: SSDT 0xFFFF90B20A49D000 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.333839] ACPI: Dynamic OEM Table Load:
[    0.333841] ACPI: SSDT 0xFFFF90B20A49DE00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.336697] ACPI: Interpreter enabled
[    0.336723] ACPI: (supports S0 S3 S4 S5)
[    0.336724] ACPI: Using IOAPIC for interrupt routing
[    0.336746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.337601] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.339081] ACPI: Power Resource [PG00] (on)
[    0.339347] ACPI: Power Resource [PG01] (on)
[    0.339579] ACPI: Power Resource [PG02] (on)
[    0.342316] ACPI: Power Resource [WRST] (on)
[    0.342523] ACPI: Power Resource [WRST] (on)
[    0.342728] ACPI: Power Resource [WRST] (on)
[    0.342934] ACPI: Power Resource [WRST] (on)
[    0.343141] ACPI: Power Resource [WRST] (on)
[    0.343345] ACPI: Power Resource [WRST] (on)
[    0.343549] ACPI: Power Resource [WRST] (on)
[    0.343754] ACPI: Power Resource [WRST] (on)
[    0.343958] ACPI: Power Resource [WRST] (on)
[    0.344194] ACPI: Power Resource [WRST] (on)
[    0.344400] ACPI: Power Resource [WRST] (on)
[    0.344604] ACPI: Power Resource [WRST] (on)
[    0.344810] ACPI: Power Resource [WRST] (on)
[    0.345013] ACPI: Power Resource [WRST] (on)
[    0.345220] ACPI: Power Resource [WRST] (on)
[    0.345423] ACPI: Power Resource [WRST] (on)
[    0.345627] ACPI: Power Resource [WRST] (on)
[    0.346390] ACPI: Power Resource [WRST] (on)
[    0.346597] ACPI: Power Resource [WRST] (on)
[    0.346803] ACPI: Power Resource [WRST] (on)
[    0.354975] ACPI: Power Resource [FN00] (off)
[    0.355021] ACPI: Power Resource [FN01] (off)
[    0.355066] ACPI: Power Resource [FN02] (off)
[    0.355111] ACPI: Power Resource [FN03] (off)
[    0.355156] ACPI: Power Resource [FN04] (off)
[    0.355826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.355829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.355935] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.356035] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.356035] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.356503] PCI host bridge to bus 0000:00
[    0.356504] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.356505] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.356506] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.356507] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.356508] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.356508] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.356513] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
[    0.356726] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.356753] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.356876] pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
[    0.356882] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.356886] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.356888] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.357039] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.357071] pci 0000:00:14.0: reg 0x10: [mem 0xdf220000-0xdf22ffff 64bit]
[    0.357168] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.357329] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.357360] pci 0000:00:14.2: reg 0x10: [mem 0xdf23a000-0xdf23afff 64bit]
[    0.357549] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.357578] pci 0000:00:16.0: reg 0x10: [mem 0xdf239000-0xdf239fff 64bit]
[    0.357660] pci 0000:00:16.0: PME# supported from D3hot
[    0.357785] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.357812] pci 0000:00:17.0: reg 0x10: [mem 0xdf234000-0xdf235fff]
[    0.357822] pci 0000:00:17.0: reg 0x14: [mem 0xdf238000-0xdf2380ff]
[    0.357833] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.357844] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.357855] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.357866] pci 0000:00:17.0: reg 0x24: [mem 0xdf237000-0xdf2377ff]
[    0.357927] pci 0000:00:17.0: PME# supported from D3hot
[    0.358046] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.358170] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.358326] pci 0000:00:1d.0: [8086:a11d] type 01 class 0x060400
[    0.358451] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.358602] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[    0.358785] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.358805] pci 0000:00:1f.2: reg 0x10: [mem 0xdf230000-0xdf233fff]
[    0.358974] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.359034] pci 0000:00:1f.4: reg 0x10: [mem 0xdf236000-0xdf2360ff 64bit]
[    0.359104] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.359272] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.359299] pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
[    0.359413] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.359526] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.359659] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.359737] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    0.360020] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.360143] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.360310] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.360317] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.360424] pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
[    0.360458] pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdf01ffff]
[    0.360481] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe01f]
[    0.360493] pci 0000:03:00.0: reg 0x1c: [mem 0xdf020000-0xdf023fff]
[    0.360620] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.360686] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1d.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.360783] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.360787] pci 0000:00:1d.0:   bridge window [io  0xe000-0xefff]
[    0.360790] pci 0000:00:1d.0:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.362464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362506] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.362543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362584] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362664] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.362741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.363057] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.363057] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.363071] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.363071] vgaarb: loaded
[    0.363115] SCSI subsystem initialized
[    0.363121] libata version 3.00 loaded.
[    0.363121] ACPI: bus type USB registered
[    0.363121] usbcore: registered new interface driver usbfs
[    0.363121] usbcore: registered new interface driver hub
[    0.363121] usbcore: registered new device driver usb
[    0.363121] pps_core: LinuxPPS API ver. 1 registered
[    0.363121] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.363121] PTP clock support registered
[    0.363126] EDAC MC: Ver: 3.0.0
[    0.363165] PCI: Using ACPI for IRQ routing
[    0.391327] PCI: pci_cache_line_size set to 64 bytes
[    0.391415] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.391415] e820: reserve RAM buffer [mem 0x8415a000-0x87ffffff]
[    0.391416] e820: reserve RAM buffer [mem 0x89cf4000-0x8bffffff]
[    0.391416] e820: reserve RAM buffer [mem 0x8a954000-0x8bffffff]
[    0.391417] e820: reserve RAM buffer [mem 0x8b3ff000-0x8bffffff]
[    0.391418] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
[    0.391462] NetLabel: Initializing
[    0.391462] NetLabel:  domain hash size = 128
[    0.391462] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.391470] NetLabel:  unlabeled traffic allowed by default
[    0.391472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.391472] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.393079] clocksource: Switched to clocksource tsc-early
[    0.399988] VFS: Disk quotas dquot_6.6.0
[    0.399995] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.400023] pnp: PnP ACPI init
[    0.400175] system 00:00: [io  0x0a00-0x0a1f] has been reserved
[    0.400176] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.400177] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.400180] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.400489] pnp 00:01: [dma 0 disabled]
[    0.400514] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.400563] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.400945] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.400946] system 00:03: [io  0xffff] has been reserved
[    0.400947] system 00:03: [io  0xffff] has been reserved
[    0.400948] system 00:03: [io  0xffff] has been reserved
[    0.400948] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.400949] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.400951] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401005] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.401007] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401016] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.401034] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.401035] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.401160] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.401161] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.401162] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.401162] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.401163] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.401164] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.401165] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.401166] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.401167] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.401168] system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.401169] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401191] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.401192] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.401192] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.401193] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.401194] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.401195] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.401196] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.401198] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401379] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.401381] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.402081] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.402081] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.402082] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.402084] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.402611] pnp: PnP ACPI: found 11 devices
[    0.407713] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.407756] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.407760] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.407768] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.407778] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.407780] pci 0000:00:1d.0:   bridge window [io  0xe000-0xefff]
[    0.407785] pci 0000:00:1d.0:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.407795] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.407795] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.407796] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.407797] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.407798] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.407798] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.407799] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.407800] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.407881] NET: Registered protocol family 2
[    0.407955] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.408012] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.408188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.408265] TCP: Hash tables configured (established 262144 bind 65536)
[    0.408289] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.408338] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.408405] NET: Registered protocol family 1
[    0.408412] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.408634] PCI: CLS 64 bytes, default 64
[    0.408656] Unpacking initramfs...
[    1.285007] Freeing initrd memory: 92652K
[    1.289123] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.289128] software IO TLB: mapped [mem 0x85cf4000-0x89cf4000] (64MB)
[    1.289204] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
[    1.289213] clocksource: Switched to clocksource tsc
[    1.289881] Initialise system trusted keyrings
[    1.289888] Key type blacklist registered
[    1.289902] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    1.290514] zbud: loaded
[    1.290775] pstore: using deflate compression
[    1.370397] alg: No test for 842 (842-generic)
[    1.370408] alg: No test for 842 (842-scomp)
[    1.373192] NET: Registered protocol family 38
[    1.373193] Key type asymmetric registered
[    1.373193] Asymmetric key parser 'x509' registered
[    1.373198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.373217] io scheduler noop registered
[    1.373217] io scheduler deadline registered
[    1.373235] io scheduler cfq registered (default)
[    1.373235] io scheduler mq-deadline registered
[    1.373273] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.373799] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    1.373820] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[    1.373837] intel_idle: MWAIT substates: 0x142120
[    1.373837] intel_idle: v0.4.1 model 0x9E
[    1.373999] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.374105] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.374110] ACPI: Sleep Button [SLPB]
[    1.374125] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.374127] ACPI: Power Button [PWRB]
[    1.374142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.374149] ACPI: Power Button [PWRF]
[    1.435488] thermal LNXTHERM:00: registered as thermal_zone0
[    1.435489] ACPI: Thermal Zone [TZ00] (28 C)
[    1.435584] thermal LNXTHERM:01: registered as thermal_zone1
[    1.435584] ACPI: Thermal Zone [TZ01] (30 C)
[    1.435770] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.456792] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.457975] Non-volatile memory driver v1.3
[    1.457986] Linux agpgart interface v0.103
[    1.458437] ahci 0000:00:17.0: version 3.0
[    1.468931] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x3c impl SATA mode
[    1.468933] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.477771] scsi host0: ahci
[    1.477903] scsi host1: ahci
[    1.478058] scsi host2: ahci
[    1.478193] scsi host3: ahci
[    1.478228] scsi host4: ahci
[    1.478327] scsi host5: ahci
[    1.478340] ata1: DUMMY
[    1.478341] ata2: DUMMY
[    1.478353] ata3: SATA max UDMA/133 abar m2048@0xdf237000 port 0xdf237200 irq 124
[    1.478355] ata4: SATA max UDMA/133 abar m2048@0xdf237000 port 0xdf237280 irq 124
[    1.478356] ata5: SATA max UDMA/133 abar m2048@0xdf237000 port 0xdf237300 irq 124
[    1.478358] ata6: SATA max UDMA/133 abar m2048@0xdf237000 port 0xdf237380 irq 124
[    1.478405] libphy: Fixed MDIO Bus: probed
[    1.478445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.478446] ehci-pci: EHCI PCI platform driver
[    1.478452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.478453] ohci-pci: OHCI PCI platform driver
[    1.478456] uhci_hcd: USB Universal Host Controller Interface driver
[    1.478598] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.478614] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.479748] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[    1.479753] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.479959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.479960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.479961] usb usb1: Product: xHCI Host Controller
[    1.479962] usb usb1: Manufacturer: Linux 4.19.0-rc2-wt xhci-hcd
[    1.479962] usb usb1: SerialNumber: 0000:00:14.0
[    1.480040] hub 1-0:1.0: USB hub found
[    1.480084] hub 1-0:1.0: 16 ports detected
[    1.480853] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.480898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.480899] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.480929] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.480930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480931] usb usb2: Product: xHCI Host Controller
[    1.480932] usb usb2: Manufacturer: Linux 4.19.0-rc2-wt xhci-hcd
[    1.480932] usb usb2: SerialNumber: 0000:00:14.0
[    1.480993] hub 2-0:1.0: USB hub found
[    1.481024] hub 2-0:1.0: 10 ports detected
[    1.481625] usbcore: registered new interface driver usbserial_generic
[    1.481627] usbserial: USB Serial support registered for generic
[    1.481642] i8042: PNP: No PS/2 controller found.
[    1.481665] mousedev: PS/2 mouse device common for all mice
[    1.481743] rtc_cmos 00:05: RTC can wake from S4
[    1.482163] rtc_cmos 00:05: registered as rtc0
[    1.482164] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.482191] device-mapper: uevent: version 1.0.3
[    1.482217] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.482289] intel_pstate: Intel P-state driver initializing
[    1.482326] intel_pstate: Disabling energy efficiency optimization
[    1.482709] intel_pstate: HWP enabled
[    1.482850] hidraw: raw HID events driver (C) Jiri Kosina
[    1.482875] usbcore: registered new interface driver usbhid
[    1.482875] usbhid: USB HID core driver
[    1.482921] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
[    1.482923] caller pmc_core_probe+0x88/0x260 mapping multiple BARs
[    1.482939] intel_pmc_core:  initialized
[    1.482973] drop_monitor: Initializing network drop monitor service
[    1.483025] Initializing XFRM netlink socket
[    1.483082] NET: Registered protocol family 10
[    1.484679] Segment Routing with IPv6
[    1.484690] mip6: Mobile IPv6
[    1.484691] NET: Registered protocol family 17
[    1.485077] RAS: Correctable Errors collector initialized.
[    1.485090] microcode: sig=0x906e9, pf=0x2, revision=0x8e
[    1.485178] microcode: Microcode Update Driver: v2.2.
[    1.485185] AVX2 version of gcm_enc/dec engaged.
[    1.485185] AES CTR mode by8 optimization enabled
[    1.491850] sched_clock: Marking stable (1487298886, 4548586)->(1516456101, -24608629)
[    1.491969] registered taskstats version 1
[    1.491974] Loading compiled-in X.509 certificates
[    1.510628] Loaded X.509 cert 'Build time autogenerated kernel key: 067854897067f33899bcf58464e27aefb962e0ea'
[    1.510643] zswap: loaded using pool lzo/zbud
[    1.512717] Key type big_key registered
[    1.513600] Key type encrypted registered
[    1.513606] ima: No TPM chip found, activating TPM-bypass!
[    1.513610] ima: Allocated hash algorithm: sha1
[    1.514095]   Magic number: 2:287:487
[    1.514304] rtc_cmos 00:05: setting system clock to 2018-09-10 15:28:32 UTC (1536593312)
[    1.793333] ata4: SATA link down (SStatus 4 SControl 300)
[    1.793366] ata6: SATA link down (SStatus 4 SControl 300)
[    1.793400] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.793424] ata5: SATA link down (SStatus 4 SControl 300)
[    1.794248] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.794535] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.794912] ata3.00: ATA-11: WDC WDS500G2B0A-00SM50, X61130WD, max UDMA/133
[    1.794914] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.796505] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.796794] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.797678] ata3.00: configured for UDMA/133
[    1.797997] scsi 2:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 30WD PQ: 0 ANSI: 5
[    1.798440] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.798722] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.798785] sd 2:0:0:0: [sda] Write Protect is off
[    1.798788] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.798869] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.799463]  sda: sda1 sda2
[    1.799796] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.801113] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.927481] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    1.927482] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.927483] usb 1-1: Product: USB 2.0 Hub
[    1.928154] hub 1-1:1.0: USB hub found
[    1.928228] hub 1-1:1.0: 4 ports detected
[    1.997308] Freeing unused kernel image memory: 2140K
[    2.004209] Write protecting the kernel read-only data: 18432k
[    2.005018] Freeing unused kernel image memory: 2012K
[    2.005149] Freeing unused kernel image memory: 160K
[    2.009339] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.009342] rodata_test: all tests were successful
[    2.009343] x86/mm: Checking user space page tables
[    2.013335] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.013336] Run /init as init process
[    2.018034] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.030574] systemd[1]: Detected architecture x86-64.
[    2.030576] systemd[1]: Running in initial RAM disk.
[    2.032779] systemd[1]: Set hostname to <trillian>.
[    2.042080] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    2.055364] random: systemd: uninitialized urandom read (16 bytes read)
[    2.055370] systemd[1]: Reached target Slices.
[    2.055396] random: systemd: uninitialized urandom read (16 bytes read)
[    2.055417] systemd[1]: Listening on udev Kernel Socket.
[    2.055422] random: systemd: uninitialized urandom read (16 bytes read)
[    2.055425] systemd[1]: Reached target Swap.
[    2.055458] systemd[1]: Listening on udev Control Socket.
[    2.055465] systemd[1]: Reached target Timers.
[    2.055502] systemd[1]: Listening on Journal Audit Socket.
[    2.062699] audit: type=1130 audit(1536593313.046:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.062989] audit: type=1130 audit(1536593313.046:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.078853] audit: type=1130 audit(1536593313.062:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.096446] audit: type=1130 audit(1536593313.080:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.096447] audit: type=1131 audit(1536593313.080:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.110899] audit: type=1130 audit(1536593313.094:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.123464] audit: type=1130 audit(1536593313.107:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.128230] audit: type=1130 audit(1536593313.112:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.173618] usb 1-5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[    2.173620] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.173622] usb 1-5: Product: FT232R USB UART
[    2.173623] usb 1-5: Manufacturer: FTDI
[    2.173624] usb 1-5: SerialNumber: A603JCM3
[    2.176693] audit: type=1130 audit(1536593313.160:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.209303] dca service started, version 1.12.1
[    2.244080] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[    2.249705] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    2.249706] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.251300] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.251300] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.251469] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.278628] pps pps0: new PPS source ptp0
[    2.278629] igb 0000:03:00.0: added PHC on eth0
[    2.278630] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[    2.278632] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 80:ee:73:c8:ee:a2
[    2.278633] igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
[    2.278634] igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    2.279300] igb 0000:03:00.0 enp3s0: renamed from eth0
[    2.320774] kvmgt: Unknown symbol gfn_to_memslot (err -2)
[    2.320779] kvmgt: Unknown symbol vfio_pin_pages (err -2)
[    2.320782] kvmgt: Unknown symbol vfio_info_cap_shift (err -2)
[    2.320784] kvmgt: Unknown symbol vfio_set_irqs_validate_and_prepare (err -2)
[    2.320787] kvmgt: Unknown symbol vfio_device_put (err -2)
[    2.320789] kvmgt: Unknown symbol gfn_to_pfn (err -2)
[    2.320791] kvmgt: Unknown symbol mdev_from_dev (err -2)
[    2.320795] kvmgt: Unknown symbol kvm_put_kvm (err -2)
[    2.320797] kvmgt: Unknown symbol kvm_write_guest (err -2)
[    2.320800] kvmgt: Unknown symbol kvm_slot_page_track_remove_page (err -2)
[    2.320803] kvmgt: Unknown symbol kvm_page_track_register_notifier (err -2)
[    2.320805] kvmgt: Unknown symbol mdev_parent_dev (err -2)
[    2.320808] kvmgt: Unknown symbol vfio_unpin_pages (err -2)
[    2.320812] kvmgt: Unknown symbol kvm_is_visible_gfn (err -2)
[    2.320813] kvmgt: Unknown symbol kvm_page_track_unregister_notifier (err -2)
[    2.320816] kvmgt: Unknown symbol vfio_device_get_from_dev (err -2)
[    2.320818] kvmgt: Unknown symbol kvm_slot_page_track_add_page (err -2)
[    2.320822] kvmgt: Unknown symbol vfio_register_notifier (err -2)
[    2.320824] kvmgt: Unknown symbol vfio_info_add_capability (err -2)
[    2.320825] kvmgt: Unknown symbol mdev_get_drvdata (err -2)
[    2.320828] kvmgt: Unknown symbol mdev_register_device (err -2)
[    2.320830] kvmgt: Unknown symbol mdev_dev (err -2)
[    2.320831] kvmgt: Unknown symbol mdev_unregister_device (err -2)
[    2.320835] kvmgt: Unknown symbol vfio_unregister_notifier (err -2)
[    2.320836] kvmgt: Unknown symbol kvm_read_guest (err -2)
[    2.320839] kvmgt: Unknown symbol mdev_set_drvdata (err -2)
[    2.320841] kvmgt: Unknown symbol kvm_get_kvm (err -2)
[    2.332964] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00
[    2.332965] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.332966] usb 1-1.2: Product: Wireless 
[    2.332967] usb 1-1.2: Manufacturer: MediaTek Inc.
[    2.332968] usb 1-1.2: SerialNumber: 000000000
[    2.412099] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
[    2.508150] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01
[    2.508151] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.508152] usb 1-1.3: Product: USB Multimedia Keyboard
[    2.508153] usb 1-1.3: Manufacturer: LITEON Technology
[    2.513358] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    2.516224] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C313.0001/input/input3
[    2.568293] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-1.3/input0
[    2.570416] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C313.0002/input/input4
[    2.597297] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 80:ee:73:c8:ee:a3
[    2.597298] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    2.597396] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    2.597964] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    2.622272] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-1.3/input1
[    2.698112] usb 1-1.4: new high-speed USB device number 6 using xhci_hcd
[    2.726568] [drm] Replacing VGA console driver
[    2.727874] Console: switching to colour dummy device 80x25
[    2.728879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.728879] [drm] Driver supports precise vblank timestamp query.
[    2.729241] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.729506] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.731814] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    2.732984] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.733182] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.753941] fbcon: inteldrmfb (fb0) is primary device
[    2.765939] random: fast init done
[    2.783592] Console: switching to colour frame buffer device 240x67
[    2.786568] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    2.786571] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.786573] usb 1-1.4: Product: USB 2.0 Hub
[    2.787839] hub 1-1.4:1.0: USB hub found
[    2.787880] hub 1-1.4:1.0: 4 ports detected
[    2.807207] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.059288] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.077087] usb 1-1.4.1: new low-speed USB device number 7 using xhci_hcd
[    3.169866] usb 1-1.4.1: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
[    3.169868] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.169870] usb 1-1.4.1: Product: Microsoft USB Optical Mouse
[    3.169871] usb 1-1.4.1: Manufacturer: PixArt
[    3.175222] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:045E:00CB.0003/input/input6
[    3.175521] hid-generic 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-1.4.1/input0
[    3.409489] systemd-journald[243]: Received SIGTERM from PID 1 (systemd).
[    3.434500] systemd: 16 output lines suppressed due to ratelimiting
[    3.865310] SELinux:  Class bpf not defined in policy.
[    3.865310] SELinux:  Class xdp_socket not defined in policy.
[    3.865310] SELinux: the above unknown classes and permissions will be allowed
[    3.865314] SELinux:  policy capability network_peer_controls=1
[    3.865314] SELinux:  policy capability open_perms=1
[    3.865315] SELinux:  policy capability extended_socket_class=1
[    3.865315] SELinux:  policy capability always_check_network=0
[    3.865315] SELinux:  policy capability cgroup_seclabel=1
[    3.865315] SELinux:  policy capability nnp_nosuid_transition=1
[    3.879573] systemd[1]: Successfully loaded SELinux policy in 353.755ms.
[    3.907353] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 14.052ms.
[    3.909851] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.921565] systemd[1]: Detected architecture x86-64.
[    3.922209] systemd[1]: Set hostname to <trillian>.
[    4.155120] systemd[1]: Stopped Switch Root.
[    4.155256] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[    4.155296] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    4.155305] systemd[1]: Stopped Journal Service.
[    4.155860] systemd[1]: Starting Journal Service...
[    4.156209] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.156383] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.181640] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    4.192986] systemd-journald[616]: Received request to flush runtime journal from PID 1
[    4.293643] random: crng init done
[    4.293644] random: 7 urandom warning(s) missed due to ratelimiting
[    4.393237] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.422888] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.422920] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.424131] usbcore: registered new interface driver ftdi_sio
[    4.424141] usbserial: USB Serial support registered for FTDI USB Serial Device
[    4.424160] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[    4.424173] usb 1-5: Detected FT232RL
[    4.424634] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
[    4.430184] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.430185] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.430186] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.430186] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.430187] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.430187] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.440944] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.477197] iTCO_vendor_support: vendor-support=0
[    4.482805] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.482857] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    4.482978] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.493544] Adding 16482300k swap on /dev/mapper/fedora-swap.  Priority:-2 extents:1 across:16482300k SSFS
[    4.536127] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.536983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.730838] Intel(R) Wireless WiFi driver for Linux
[    4.730839] Copyright(c) 2003- 2015 Intel Corporation
[    4.751891] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[    5.082499] intel_rapl: Found RAPL domain package
[    5.082501] intel_rapl: Found RAPL domain core
[    5.082501] intel_rapl: Found RAPL domain uncore
[    5.082502] intel_rapl: Found RAPL domain dram
[    5.194367] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    5.249724] usb 1-1.2: reset high-speed USB device number 4 using xhci_hcd
[    5.254128] iwlwifi 0000:02:00.0: base HW address: 60:f6:77:b0:21:e2
[    5.342411] mt76x2u 1-1.2:1.0: ASIC revision: 76120044
[    5.353925] ieee80211 phy1: Selected rate control algorithm 'iwl-mvm-rs'
[    5.355021] thermal thermal_zone4: failed to read out thermal zone (-61)
[    5.360701] mt76x2u 1-1.2:1.0: ROM patch build: 20140408060640a
[    5.364220] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.385565] kauditd_printk_skb: 54 callbacks suppressed
[    5.385567] audit: type=1130 audit(1536593316.369:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.510957] mt76x2u 1-1.2:1.0: Firmware Version: 0.0.00
[    5.510962] mt76x2u 1-1.2:1.0: Build: 1
[    5.510964] mt76x2u 1-1.2:1.0: Build Time: 201406241830____
[    6.245264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.246002] usbcore: registered new interface driver mt76x2u
[    6.260317] mt76x2u 1-1.2:1.0 wlp0s20f0u1u2: renamed from wlan0
[    6.280111] audit: type=1130 audit(1536593317.264:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.281509] audit: type=1130 audit(1536593317.265:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.294900] audit: type=1130 audit(1536593317.278:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.294906] audit: type=1131 audit(1536593317.278:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.300573] audit: type=1130 audit(1536593317.284:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.324970] audit: type=1130 audit(1536593317.308:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-a0c8ca0e\x2d2590\x2d45d6\x2dad4f\x2def169177754a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.332802] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.334349] audit: type=1130 audit(1536593317.318:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.344933] audit: type=1130 audit(1536593317.328:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.352396] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    6.356314] audit: type=1130 audit(1536593317.340:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.540919] RPC: Registered named UNIX socket transport module.
[    6.540920] RPC: Registered udp transport module.
[    6.540920] RPC: Registered tcp transport module.
[    6.540921] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.272176] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.479241] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.481838] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    7.507651] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    7.507660] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    7.510615] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f0u1u2: link is not ready
[    7.645924] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f0u1u2: link is not ready
[    7.647733] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.859879] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.859900] Bridge firewalling registered
[    7.918198] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.919288] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f0u1u2: link is not ready
[    7.960717] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    7.960720] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    7.960726] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    7.960729] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.031385] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[    8.056334] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html for details.
[    8.089429] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.089435] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.089442] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.089446] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.089779] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[    8.089785] netlink: 8 bytes leftover after parsing attributes in process `dockerd-current'.
[   10.130817] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.130892] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[   10.518694] igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   10.623264] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 5188 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf
  2018-09-10 15:44 desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf David Poole
@ 2018-09-10 17:27 ` Lorenzo Bianconi
  2018-09-10 17:32   ` David Poole
  0 siblings, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2018-09-10 17:27 UTC (permalink / raw)
  To: davep; +Cc: linux-wireless, dpoole

>
> Start wpa_supplicant
> Attach to a Cisco AP (haven't tried too many other APs yet). Desktop
> locks up hard.  I have some shell scripts I use start wpa_supp and run
> wpa_cli (I'm not going through the GNOME ui or other).
>
> (Occurs to me I need to verify I didn't have the system's
> wpa_supplicant running... I forget to kill the systemd started wpa_supp
> before starting mine.)
>
> Captured a kernel oops (attached) with netconsole. Same kernel with my
> 2nd wifi (an Intel 8265 PCI-e card) works.
>
> Running:
> git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-
> testing.git   72d1e548defbf75c6bb42fc99276cd88fda7dda0
>
>
> I can 'iw dev scan' & scan through wpa_supplicant with the card fairly
> successfully. I haven't tried monitor mode. Have recreated the oops a
> couple times.
>
>
> Alfa AWUSB036ACM
>

Hi David,

according to the kernel log you provided the crash occurs in
ieee80211_wake_txqs().
Could you please run gdb in order to identify the point where NULL
pointer dereference occurs? E.g:

$gdb mac80211.ko
$info address ieee80211_wake_txqs
$l*(<func addr>+<offset>)
offset is 0x1e3 in your log

Regards,
Lorenzo

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf
  2018-09-10 17:27 ` Lorenzo Bianconi
@ 2018-09-10 17:32   ` David Poole
  2018-09-17  8:14     ` Lorenzo Bianconi
  0 siblings, 1 reply; 5+ messages in thread
From: David Poole @ 2018-09-10 17:32 UTC (permalink / raw)
  To: Lorenzo Bianconi; +Cc: linux-wireless, dpoole

[-- Attachment #1: Type: text/plain, Size: 2173 bytes --]

On Mon, 2018-09-10 at 19:27 +0200, Lorenzo Bianconi wrote:
> > 
> > Start wpa_supplicant
> > Attach to a Cisco AP (haven't tried too many other APs yet).
> > Desktop
> > locks up hard.  I have some shell scripts I use start wpa_supp and
> > run
> > wpa_cli (I'm not going through the GNOME ui or other).
> > 
> > (Occurs to me I need to verify I didn't have the system's
> > wpa_supplicant running... I forget to kill the systemd started
> > wpa_supp
> > before starting mine.)
> > 
> > Captured a kernel oops (attached) with netconsole. Same kernel with
> > my
> > 2nd wifi (an Intel 8265 PCI-e card) works.
> > 
> > Running:
> > git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-
> > testing.git   72d1e548defbf75c6bb42fc99276cd88fda7dda0
> > 
> > 
> > I can 'iw dev scan' & scan through wpa_supplicant with the card
> > fairly
> > successfully. I haven't tried monitor mode. Have recreated the oops
> > a
> > couple times.
> > 
> > 
> > Alfa AWUSB036ACM
> > 
> 
> Hi David,
> 
> according to the kernel log you provided the crash occurs in
> ieee80211_wake_txqs().
> Could you please run gdb in order to identify the point where NULL
> pointer dereference occurs? E.g:
> 
> $gdb mac80211.ko
> $info address ieee80211_wake_txqs
> $l*(<func addr>+<offset>)
> offset is 0x1e3 in your log
> 
> Regards,
> Lorenzo
> 

Hello. Here's the requested info.

...trillian:wireless-testing% gdb ./net/mac80211/mac80211.ko
[...]
(gdb) info address ieee80211_wake_txqs
Symbol "ieee80211_wake_txqs" is a function at address 0x35890.
[...]
(gdb) l*(0x35890+0x1e3)
0x35a73 is in ieee80211_wake_txqs (net/mac80211/util.c:269).
264                     for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++)
{
265                             struct ieee80211_txq *txq = sta-
>sta.txq[i];
266
267                             txqi = to_txq_info(txq);
268
269                             if (ac != txq->ac)
270                                     continue;
271
272                             if
(!test_and_clear_bit(IEEE80211_TXQ_STOP_NETIF_TX,
273                                                     &txqi->flags))

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 5188 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf
  2018-09-10 17:32   ` David Poole
@ 2018-09-17  8:14     ` Lorenzo Bianconi
  2018-09-17 19:07       ` David Poole
  0 siblings, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2018-09-17  8:14 UTC (permalink / raw)
  To: davep; +Cc: linux-wireless, dpoole

>
> Hello. Here's the requested info.
>
> ...trillian:wireless-testing% gdb ./net/mac80211/mac80211.ko
> [...]
> (gdb) info address ieee80211_wake_txqs
> Symbol "ieee80211_wake_txqs" is a function at address 0x35890.
> [...]
> (gdb) l*(0x35890+0x1e3)
> 0x35a73 is in ieee80211_wake_txqs (net/mac80211/util.c:269).
> 264                     for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++)
> {
> 265                             struct ieee80211_txq *txq = sta-
> >sta.txq[i];
> 266
> 267                             txqi = to_txq_info(txq);
> 268
> 269                             if (ac != txq->ac)
> 270                                     continue;
> 271
> 272                             if
> (!test_and_clear_bit(IEEE80211_TXQ_STOP_NETIF_TX,
> 273                                                     &txqi->flags))

It should be fixed here:
https://marc.info/?l=linux-kernel&m=153694084922438&w=2
-- 
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf
  2018-09-17  8:14     ` Lorenzo Bianconi
@ 2018-09-17 19:07       ` David Poole
  0 siblings, 0 replies; 5+ messages in thread
From: David Poole @ 2018-09-17 19:07 UTC (permalink / raw)
  To: Lorenzo Bianconi; +Cc: linux-wireless, dpoole

[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]

On Mon, 2018-09-17 at 10:14 +0200, Lorenzo Bianconi wrote:
> > 
> > Hello. Here's the requested info.
> > 
> > ...trillian:wireless-testing% gdb ./net/mac80211/mac80211.ko
> > [...]
> > (gdb) info address ieee80211_wake_txqs
> > Symbol "ieee80211_wake_txqs" is a function at address 0x35890.
> > [...]
> > (gdb) l*(0x35890+0x1e3)
> > 0x35a73 is in ieee80211_wake_txqs (net/mac80211/util.c:269).
> > 264                     for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++)
> > {
> > 265                             struct ieee80211_txq *txq = sta-
> > > sta.txq[i];
> > 
> > 266
> > 267                             txqi = to_txq_info(txq);
> > 268
> > 269                             if (ac != txq->ac)
> > 270                                     continue;
> > 271
> > 272                             if
> > (!test_and_clear_bit(IEEE80211_TXQ_STOP_NETIF_TX,
> > 273                                                     &txqi->flags))
> 
> It should be fixed here:
> https://marc.info/?l=linux-kernel&m=153694084922438&w=2

Worked! Continuing to test.




[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 5188 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-09-18  0:36 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-10 15:44 desktop hard lock up (kernel panic) with Alfa AWUSB036ACM and wireless-testing 72d1e548defbf David Poole
2018-09-10 17:27 ` Lorenzo Bianconi
2018-09-10 17:32   ` David Poole
2018-09-17  8:14     ` Lorenzo Bianconi
2018-09-17 19:07       ` David Poole

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.