All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zdenek Kabelac <zkabelac@redhat.com>
To: "Alexander E. Patrakov"
	<public-patrakov-Re5JQEeQqe8AvxtiuMwx3w@hugh.gmane.org>
Cc: reinette chatre
	<public-reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@hugh.gmane.org>,
	"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<public-linux-kernel-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org>,
	"linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<public-linux-wireless-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org>
Subject: Re: iwlagn interrupt problem
Date: Fri, 12 Dec 2008 11:59:37 +0100	[thread overview]
Message-ID: <49424419.1090103@redhat.com> (raw)
In-Reply-To: <c072ca310812110548s64612ac7icd6e9187aa4af75a@mail.gmail.com>




Alexander E. Patrakov napsal(a):
> 2008/12/10 reinette chatre <reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>:
>> The messages you refer to are printed because a user space app
>> (wpa_supplicant or network manager) brings the wireless interface down
>> and up. Interrupts are disabled when interface is brought down and
>> reenabled when interface is brought up.
> 
> OK.
> 
>> The unresponsiveness is due to a bug that was fixed recently. The
>> patches have been merged into wireless-testing repo and will be included
>> in 2.6.29. If you want to try
>> the individual patches, please try:
>> http://marc.info/?l=linux-wireless&m=122824886623698&w=2
>> http://marc.info/?l=linux-wireless&m=122849275528102&w=2
> 
> These individual patches don't apply to 2.6.27.6, so I installed
> today's compat-wireless-2.6, and it seems to work. Thanks!
> 
> OTOH, are these patches a material for backporting into -stable?
> 

Hi

I assume that this backtrace I've got with 2.6.28-rc7 is the same issue ?
(If I get it right - this issue will not be fixed in 2.6.28 and is delay for 
2.6.29 ?))

usb 3-2: reset full speed USB device using uhci_hcd and address 9
Restarting tasks ... done.
e1000e 0000:00:19.0: irq 377 for MSI/MSI-X
e1000e 0000:00:19.0: irq 377 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: irq 376 for MSI/MSI-X
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:11:d8:da:65:40
wlan0: authenticated
wlan0: associate with AP 00:11:d8:da:65:40
wlan0: RX AssocResp from 00:11:d8:da:65:40 (capab=0x401 status=0 aid=8)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociating by local choice (reason=3)
wlan0: no IPv6 routers present
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:11:d8:da:65:40
wlan0: authenticated
wlan0: associate with AP 00:11:d8:da:65:40
wlan0: RX ReassocResp from 00:11:d8:da:65:40 (capab=0x401 status=0 aid=8)
wlan0: associated
wlan0: No ProbeResp from current AP 00:11:d8:da:65:40 - assume out of range
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_RXON_ASSOC: time out after 500ms.
iwl3945: Error setting RXON_ASSOC configuration (-110).
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_QOS_PARAM: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_SCAN_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: Error sending REPLY_RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
wlan0: direct probe to AP 00:11:d8:da:65:40 try 1
wlan0: direct probe to AP 00:11:d8:da:65:40 try 2
wlan0: direct probe to AP 00:11:d8:da:65:40 try 3
wlan0: direct probe to AP 00:11:d8:da:65:40 timed out
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_SCAN_CMD: iwl3945_enqueue_hcmd failed: -28
iwl3945: No space for Tx
iwl3945: Error sending REPLY_RXON: iwl3945_enqueue_hcmd failed: -28
iwl3945: Error setting new configuration (-28).
iwl3945: No space for Tx
iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28


Zdenek



  parent reply	other threads:[~2008-12-12 11:13 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-10 14:38 iwlagn interrupt problem Alexander E. Patrakov
2008-12-10 15:10 ` Alexander E. Patrakov
2008-12-10 17:19   ` reinette chatre
2008-12-11 13:48     ` Alexander E. Patrakov
2008-12-11 17:14       ` reinette chatre
2008-12-12 10:59       ` Zdenek Kabelac [this message]
2008-12-12 10:59         ` Zdenek Kabelac
2008-12-12 11:23         ` Alexander E. Patrakov
2008-12-12 11:31           ` Zdenek Kabelac
2008-12-12 11:31             ` Zdenek Kabelac
2008-12-12 11:39             ` Alexander E. Patrakov
2008-12-12 11:39               ` Alexander E. Patrakov
2008-12-12 13:03             ` Dan Williams
2008-12-12 13:03               ` Dan Williams
2008-12-12 14:04               ` Zdenek Kabelac
2008-12-12 14:04                 ` Zdenek Kabelac

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49424419.1090103@redhat.com \
    --to=zkabelac@redhat.com \
    --cc=public-linux-kernel-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org \
    --cc=public-linux-wireless-u79uwXL29TY76Z2rM5mHXA@hugh.gmane.org \
    --cc=public-patrakov-Re5JQEeQqe8AvxtiuMwx3w@hugh.gmane.org \
    --cc=public-reinette.chatre-ral2JQCrhuEAvxtiuMwx3w@hugh.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.