* [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal
@ 2021-04-22 12:34 Oguz Bektas
2021-04-22 12:55 ` [Bug 1925496] " Klaus Jensen
` (7 more replies)
0 siblings, 8 replies; 13+ messages in thread
From: Oguz Bektas @ 2021-04-22 12:34 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
New
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
@ 2021-04-22 12:55 ` Klaus Jensen
2021-04-22 13:38 ` Oguz Bektas
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Klaus Jensen @ 2021-04-22 12:55 UTC (permalink / raw)
To: qemu-devel
Hi,
What QEMU version is this happening on? Is this the -rc4, is it a
regression?
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
New
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
2021-04-22 12:55 ` [Bug 1925496] " Klaus Jensen
@ 2021-04-22 13:38 ` Oguz Bektas
2021-04-22 14:24 ` Klaus Jensen
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Oguz Bektas @ 2021-04-22 13:38 UTC (permalink / raw)
To: qemu-devel
Hi,
this is happening on qemu 5.2.0
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
New
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
2021-04-22 12:55 ` [Bug 1925496] " Klaus Jensen
2021-04-22 13:38 ` Oguz Bektas
@ 2021-04-22 14:24 ` Klaus Jensen
2021-04-26 9:31 ` Oguz Bektas
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Klaus Jensen @ 2021-04-22 14:24 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Assignee: (unassigned) => Klaus Jensen (birkelund)
** Changed in: qemu
Status: New => Confirmed
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Confirmed
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
` (2 preceding siblings ...)
2021-04-22 14:24 ` Klaus Jensen
@ 2021-04-26 9:31 ` Oguz Bektas
2021-04-28 7:38 ` Klaus Jensen
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Oguz Bektas @ 2021-04-26 9:31 UTC (permalink / raw)
To: qemu-devel
BTW Re: Regression, I think it's not, because this didn't work a year
ago either, but I wasn't sure if it's a bug.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Confirmed
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
` (3 preceding siblings ...)
2021-04-26 9:31 ` Oguz Bektas
@ 2021-04-28 7:38 ` Klaus Jensen
2021-04-28 9:31 ` Oguz Bektas
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Klaus Jensen @ 2021-04-28 7:38 UTC (permalink / raw)
To: qemu-devel
So, I had to investigate this a bit, since it is a part of QEMU that I'm
not too familiar with.
My understanding is that this is the expected behavior. The reason is
that the drive cannot be deleted immediately when the device is hot-
unplugged, since it might not be safe (other parts of QEMU could be
using it, like background block jobs).
What we *can* do, is make sure we mark the drive for auto deletion when
it is safe to do so. I'll add a patch for that.
On the other hand, the fact that if the drive is removed explicitly
through QMP (or in the monitor with drive_del), the drive id is remains
"in use". This might be a completely different bug that is unrelated to
the nvme device.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Confirmed
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
` (4 preceding siblings ...)
2021-04-28 7:38 ` Klaus Jensen
@ 2021-04-28 9:31 ` Oguz Bektas
2021-04-28 10:12 ` Klaus Jensen
2021-05-18 4:32 ` Thomas Huth
2021-06-16 14:54 ` Thomas Huth
7 siblings, 1 reply; 13+ messages in thread
From: Oguz Bektas @ 2021-04-28 9:31 UTC (permalink / raw)
To: qemu-devel
> My understanding is that this is the expected behavior. The reason is
that the drive cannot be deleted immediately when the device is hot-
unplugged, since it might not be safe (other parts of QEMU could be
using it, like background block jobs).
> On the other hand, the fact that if the drive is removed explicitly
through QMP (or in the monitor with drive_del), the drive id is remains
"in use". This might be a completely different bug that is unrelated to
the nvme device.
using the same commands I can hot-plug and hot-unplug a scsi disk like
this without issue - this behavior only appeared on nvme devices.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Confirmed
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-28 9:31 ` Oguz Bektas
@ 2021-04-28 10:12 ` Klaus Jensen
2021-04-28 13:00 ` Max Reitz
0 siblings, 1 reply; 13+ messages in thread
From: Klaus Jensen @ 2021-04-28 10:12 UTC (permalink / raw)
To: Bug 1925496; +Cc: kwolf, qemu-devel, mreitz
[-- Attachment #1: Type: text/plain, Size: 988 bytes --]
On Apr 28 09:31, Oguz Bektas wrote:
>> My understanding is that this is the expected behavior. The reason is
>> that the drive cannot be deleted immediately when the device is
>> hot-unplugged, since it might not be safe (other parts of QEMU could
>> be using it, like background block jobs).
>>
>> On the other hand, the fact that if the drive is removed explicitly
>> through QMP (or in the monitor with drive_del), the drive id is
>> remains "in use". This might be a completely different bug that is
>> unrelated to the nvme device.
>
>using the same commands I can hot-plug and hot-unplug a scsi disk like
>this without issue - this behavior only appeared on nvme devices.
>
Kevin, Max, can you shed any light on this?
Specifically what the expected behavior is wrt. to the drive when
unplugging a device that has one attached?
If the scsi disk is capable of "cleaning up" immediately, then I suppose
that some steps are missing in the nvme unrealization.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-28 10:12 ` Klaus Jensen
@ 2021-04-28 13:00 ` Max Reitz
2021-05-03 7:27 ` Klaus Jensen
0 siblings, 1 reply; 13+ messages in thread
From: Max Reitz @ 2021-04-28 13:00 UTC (permalink / raw)
To: Klaus Jensen, Bug 1925496; +Cc: kwolf, qemu-devel
On 28.04.21 12:12, Klaus Jensen wrote:
> On Apr 28 09:31, Oguz Bektas wrote:
>>> My understanding is that this is the expected behavior. The reason is
>>> that the drive cannot be deleted immediately when the device is
>>> hot-unplugged, since it might not be safe (other parts of QEMU could
>>> be using it, like background block jobs).
>>>
>>> On the other hand, the fact that if the drive is removed explicitly
>>> through QMP (or in the monitor with drive_del), the drive id is
>>> remains "in use". This might be a completely different bug that is
>>> unrelated to the nvme device.
>>
>> using the same commands I can hot-plug and hot-unplug a scsi disk like
>> this without issue - this behavior only appeared on nvme devices.
>>
>
> Kevin, Max, can you shed any light on this?
>
> Specifically what the expected behavior is wrt. to the drive when
> unplugging a device that has one attached?
>
> If the scsi disk is capable of "cleaning up" immediately, then I suppose
> that some steps are missing in the nvme unrealization.
I’m not very strong when it comes to question for guest devices, but
looking into the QAPI documentation, it says that when DEVICE_DELETED is
emitted, it’s safe to reuse the device ID. Before then, it isn’t,
because the guest may yet need to release the device.
So the questions that come to my mind are:
- Do nvme guest devices have a release protocol with the guest, so that
it just may take some time for the guest to release the device? I.e.
that this would be perfectly normal and documented behavior?
(Perhaps this just isn’t the case for scsi, or the guest just releases
those devices much quicker)
- Did Oguz always wait for the DEVICE_DELETED event before reusing the
ID? Sounds like it would be a bug if reusing the ID after getting that
event failed.
Max
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-28 13:00 ` Max Reitz
@ 2021-05-03 7:27 ` Klaus Jensen
2021-05-11 7:37 ` Hannes Reinecke
0 siblings, 1 reply; 13+ messages in thread
From: Klaus Jensen @ 2021-05-03 7:27 UTC (permalink / raw)
To: Max Reitz; +Cc: Bug 1925496, kwolf, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 2854 bytes --]
On Apr 28 15:00, Max Reitz wrote:
>On 28.04.21 12:12, Klaus Jensen wrote:
>>On Apr 28 09:31, Oguz Bektas wrote:
>>>>My understanding is that this is the expected behavior. The reason is
>>>>that the drive cannot be deleted immediately when the device is
>>>>hot-unplugged, since it might not be safe (other parts of QEMU could
>>>>be using it, like background block jobs).
>>>>
>>>>On the other hand, the fact that if the drive is removed explicitly
>>>>through QMP (or in the monitor with drive_del), the drive id is
>>>>remains "in use". This might be a completely different bug that is
>>>>unrelated to the nvme device.
>>>
>>>using the same commands I can hot-plug and hot-unplug a scsi disk like
>>>this without issue - this behavior only appeared on nvme devices.
>>>
>>
>>Kevin, Max, can you shed any light on this?
>>
>>Specifically what the expected behavior is wrt. to the drive when
>>unplugging a device that has one attached?
>>
>>If the scsi disk is capable of "cleaning up" immediately, then I
>>suppose that some steps are missing in the nvme unrealization.
>
Hi Max,
Thanks for your help!
>I’m not very strong when it comes to question for guest devices, but
>looking into the QAPI documentation, it says that when DEVICE_DELETED
>is emitted, it’s safe to reuse the device ID. Before then, it isn’t,
>because the guest may yet need to release the device.
>
This is specifically related to releasing the "drive", not the device.
Problem is that when the device is deleted (using device_del), the pci
device goes away rapidly, but the drive (as shown in `info block`)
lingers for a couple of seconds before going into the "unlocked" state.
If the drive is then deleted (`drive_del`) everything is good, but if
the drive is deleted within those couple of seconds, the drive_del
completes successfully, but the drive id never becomes available again.
>So the questions that come to my mind are:
>- Do nvme guest devices have a release protocol with the guest, so
>that it just may take some time for the guest to release the device?
>I.e. that this would be perfectly normal and documented behavior?
>(Perhaps this just isn’t the case for scsi, or the guest just releases
>those devices much quicker)
>
The NVMe device is a PCIDevice, I wonder if that is what adds some delay
on this?
>- Did Oguz always wait for the DEVICE_DELETED event before reusing the
>ID? Sounds like it would be a bug if reusing the ID after getting
>that event failed.
>
From the bug report, it does not look like anything like that is done.
I basically dont understand the deletion protocol here and why the drive
is not released immediately. Even if I add a call to
blockdev_mark_auto_del() there is a delay, but the drive does get
automatically deleted.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-05-03 7:27 ` Klaus Jensen
@ 2021-05-11 7:37 ` Hannes Reinecke
0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2021-05-11 7:37 UTC (permalink / raw)
To: Klaus Jensen, Max Reitz; +Cc: Bug 1925496, kwolf, qemu-devel
On 5/3/21 9:27 AM, Klaus Jensen wrote:
> On Apr 28 15:00, Max Reitz wrote:
>> On 28.04.21 12:12, Klaus Jensen wrote:
>>> On Apr 28 09:31, Oguz Bektas wrote:
>>>>> My understanding is that this is the expected behavior. The reason is
>>>>> that the drive cannot be deleted immediately when the device is
>>>>> hot-unplugged, since it might not be safe (other parts of QEMU could
>>>>> be using it, like background block jobs).
>>>>>
>>>>> On the other hand, the fact that if the drive is removed explicitly
>>>>> through QMP (or in the monitor with drive_del), the drive id is
>>>>> remains "in use". This might be a completely different bug that is
>>>>> unrelated to the nvme device.
>>>>
>>>> using the same commands I can hot-plug and hot-unplug a scsi disk like
>>>> this without issue - this behavior only appeared on nvme devices.
>>>>
>>>
>>> Kevin, Max, can you shed any light on this?
>>>
>>> Specifically what the expected behavior is wrt. to the drive when
>>> unplugging a device that has one attached?
>>>
>>> If the scsi disk is capable of "cleaning up" immediately, then I
>>> suppose that some steps are missing in the nvme unrealization.
>>
>
> Hi Max,
>
> Thanks for your help!
>
>> I’m not very strong when it comes to question for guest devices, but
>> looking into the QAPI documentation, it says that when DEVICE_DELETED
>> is emitted, it’s safe to reuse the device ID. Before then, it isn’t,
>> because the guest may yet need to release the device.
>>
>
> This is specifically related to releasing the "drive", not the device.
> Problem is that when the device is deleted (using device_del), the pci
> device goes away rapidly, but the drive (as shown in `info block`)
> lingers for a couple of seconds before going into the "unlocked" state.
> If the drive is then deleted (`drive_del`) everything is good, but if
> the drive is deleted within those couple of seconds, the drive_del
> completes successfully, but the drive id never becomes available again.
>
>> So the questions that come to my mind are:
>> - Do nvme guest devices have a release protocol with the guest, so
>> that it just may take some time for the guest to release the device?
>> I.e. that this would be perfectly normal and documented behavior?
>> (Perhaps this just isn’t the case for scsi, or the guest just releases
>> those devices much quicker)
>>
>
> The NVMe device is a PCIDevice, I wonder if that is what adds some delay
> on this?
>
>> - Did Oguz always wait for the DEVICE_DELETED event before reusing the
>> ID? Sounds like it would be a bug if reusing the ID after getting
>> that event failed.
>>
>
> From the bug report, it does not look like anything like that is done.
>
> I basically dont understand the deletion protocol here and why the drive
> is not released immediately. Even if I add a call to
> blockdev_mark_auto_del() there is a delay, but the drive does get
> automatically deleted.
FWIW, I've just sent a patch to re-enable NVMe namespace hotplug;
basically you can 'hot-delete' an nvme device via 'device_del <pcidev>',
but you cannot 'hot-add' an nvme device via 'device_add <pcidev>'.
Or, rather, you can, but then you end up with a NVME controller with no
namespaces which tends to be kinda pointless.
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
` (5 preceding siblings ...)
2021-04-28 9:31 ` Oguz Bektas
@ 2021-05-18 4:32 ` Thomas Huth
2021-06-16 14:54 ` Thomas Huth
7 siblings, 0 replies; 13+ messages in thread
From: Thomas Huth @ 2021-05-18 4:32 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently moving its bug tracking to another system.
For this we need to know how to transfer the bug to the new system if
(if still necessary). Thus we're setting the status to "Incomplete" now.
In the unlikely case that the bug has already been fixed in the latest
upstream version of QEMU, then please close this ticket as "Fix released".
If it is not fixed yet and you think that this bug report here should be
moved to the new system, then you have two options:
1) If you already have an account on gitlab.com, please open a new ticket
for this problem in our new tracker here:
https://gitlab.com/qemu-project/qemu/-/issues
and then close this ticket here on Launchpad (or let it expire auto-
matically after 60 days). Please mention the URL of this bug ticket on
Launchpad in the new ticket on GitLab.
2) If you don't have an account on gitlab.com and don't intend to get
one, but still would like to keep this ticket opened, then please switch
the state back to "New" or "Confirmed" within the next 60 days (other-
wise it will get closed as "Expired"). We will then eventually migrate
the ticket automatically to the new system (but you won't be the reporter
of the bug in the new system and thus you won't get notified on changes
anymore).
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Incomplete
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 1925496] Re: nvme disk cannot be hotplugged after removal
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
` (6 preceding siblings ...)
2021-05-18 4:32 ` Thomas Huth
@ 2021-06-16 14:54 ` Thomas Huth
7 siblings, 0 replies; 13+ messages in thread
From: Thomas Huth @ 2021-06-16 14:54 UTC (permalink / raw)
To: qemu-devel
This issue has been moved to the new bug tracker here:
https://gitlab.com/qemu-project/qemu/-/issues/423
Thus let's close this version in the Launchpad tracker now.
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #423
https://gitlab.com/qemu-project/qemu/-/issues/423
** Changed in: qemu
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1925496
Title:
nvme disk cannot be hotplugged after removal
Status in QEMU:
Invalid
Bug description:
Hello,
When I try to re-add an nvme disk shortly after removing it, I get an
error about duplicate ID.
See the following commands to reproduce. This happens consistently on
all VMs that I tested:
attach
==========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
$VAR1 = {
'execute' => 'device_add',
'arguments' => {
'serial' => 'nvme1',
'drive' => 'drive-nvme1',
'driver' => 'nvme',
'id' => 'nvme1'
}
};
detach
===========
$VAR1 = {
'arguments' => {
'id' => 'nvme1'
},
'execute' => 'device_del'
};
$VAR1 = {
'execute' => 'human-monitor-command',
'arguments' => {
'command-line' => 'drive_del drive-nvme1'
}
};
reattach
===========
$VAR1 = {
'arguments' => {
'command-line' => 'drive_add auto "file=/dev/zvol/rpool/data/vm-20000-disk-1,if=none,id=drive-nvme1,format=raw,cache=none,aio=native,detect-zeroes=on"'
},
'execute' => 'human-monitor-command'
};
and I get:
"Duplicate ID 'drive-nvme1' for drive"
although it does not show up in query-block or query-pci anymore after
the first detach.
Is this a bug or am I missing something? Please advise.
Best regards,
Oguz
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1925496/+subscriptions
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2021-06-16 15:02 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-22 12:34 [Bug 1925496] [NEW] nvme disk cannot be hotplugged after removal Oguz Bektas
2021-04-22 12:55 ` [Bug 1925496] " Klaus Jensen
2021-04-22 13:38 ` Oguz Bektas
2021-04-22 14:24 ` Klaus Jensen
2021-04-26 9:31 ` Oguz Bektas
2021-04-28 7:38 ` Klaus Jensen
2021-04-28 9:31 ` Oguz Bektas
2021-04-28 10:12 ` Klaus Jensen
2021-04-28 13:00 ` Max Reitz
2021-05-03 7:27 ` Klaus Jensen
2021-05-11 7:37 ` Hannes Reinecke
2021-05-18 4:32 ` Thomas Huth
2021-06-16 14:54 ` Thomas Huth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.