* 2.6.29-rc3-git9 build break : arch/powerpc/platforms/ps3/setup.o
@ 2009-02-06 16:58 Sachin P. Sant
2009-02-07 2:42 ` [patch] powerpc/ps3: Use hard coded values for LV1 device type Geoff Levand
0 siblings, 1 reply; 11+ messages in thread
From: Sachin P. Sant @ 2009-02-06 16:58 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Mel Gorman, Kamalesh Babulal
[-- Attachment #1: Type: text/plain, Size: 1474 bytes --]
2.6.29-rc3-git9 randconfig build fails with
CALL arch/powerpc/kernel/prom_init_check.sh
CC arch/powerpc/platforms/ps3/setup.o
In file included from include/scsi/scsi.h:12,
from arch/powerpc/platforms/ps3/platform.h:25,
from arch/powerpc/platforms/ps3/setup.c:36:
include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
In file included from include/scsi/scsi.h:12,
from arch/powerpc/platforms/ps3/platform.h:25,
from arch/powerpc/platforms/ps3/setup.c:36:
include/scsi/scsi_cmnd.h: In function scsi_bidi_cmnd:
include/scsi/scsi_cmnd.h:184: error: implicit declaration of function blk_bidi_rq
include/scsi/scsi_cmnd.h:185: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function scsi_in:
include/scsi/scsi_cmnd.h:191: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function scsi_get_lba:
include/scsi/scsi_cmnd.h:273: error: dereferencing pointer to incomplete type
make[2]: *** [arch/powerpc/platforms/ps3/setup.o] Error 1
make[1]: *** [arch/powerpc/platforms/ps3] Error 2
make: *** [arch/powerpc/platforms] Error 2
.config attached here.
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
[-- Attachment #2: git9_config --]
[-- Type: text/plain, Size: 50408 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc3-git9
# Fri Feb 6 22:09:59 2009
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_MM_OWNER=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
CONFIG_LPARCFG=y
CONFIG_PPC_ISERIES=y
#
# iSeries device drivers
#
# CONFIG_VIOCD is not set
CONFIG_VIOTAPE=y
CONFIG_VIOPATH=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE=y
CONFIG_PPC_PASEMI_MDIO=y
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
# CONFIG_PS3_ADVANCED is not set
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_DYNAMIC_DMA=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_FLASH=y
# CONFIG_PS3_LPM is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_PPC_CELLEB=y
CONFIG_PPC_CELL_QPACE=y
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
# CONFIG_SPU_FS_64K_LS is not set
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_CBE_THERM=y
CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_UDBG_BEAT=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_HAS_HASH_64K is not set
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_STUB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_WAN_ROUTER=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=y
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIVHCI is not set
CONFIG_PHONET=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not set
# CONFIG_MAC80211_RC_MINSTREL is not set
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
CONFIG_MAC80211_NOINLINE=y
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
CONFIG_MAC80211_HT_DEBUG=y
# CONFIG_MAC80211_TKIP_DEBUG is not set
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PCI=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_PASEMI=y
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_QINFO_PROBE=y
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
#
# SBP-2 support (for storage devices) requires SCSI
#
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_ADB_PMU is not set
# CONFIG_PMAC_SMU is not set
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_PM72 is not set
CONFIG_WINDFARM=y
CONFIG_PMAC_RACKMETER=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_NETDEV_1000 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=y
# CONFIG_S2IO is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
# CONFIG_QLGE is not set
CONFIG_TR=y
CONFIG_IBMOL=y
CONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_USB=y
# CONFIG_AIRO is not set
CONFIG_HERMES=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
# CONFIG_APPLE_AIRPORT is not set
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_ADM8211=y
CONFIG_MAC80211_HWSIM=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
# CONFIG_ATH5K is not set
CONFIG_ATH9K=y
CONFIG_ATH9K_DEBUG=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=y
CONFIG_IWLCORE=y
# CONFIG_IWLWIFI_LEDS is not set
CONFIG_IWLWIFI_RFKILL=y
CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLAGN is not set
CONFIG_IWL3945=y
# CONFIG_IWL3945_RFKILL is not set
# CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL3945_LEDS is not set
CONFIG_IWL3945_DEBUG=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_B43=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_LEDS=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=y
# CONFIG_ZD1211RW_DEBUG is not set
# CONFIG_RT2X00 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_HSO is not set
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set
CONFIG_HDLC_X25=y
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
CONFIG_PC300TOO=y
# CONFIG_FARSYNC is not set
# CONFIG_DLCI is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
# CONFIG_ATM_ENI_BURST_TX_8W is not set
CONFIG_ATM_ENI_BURST_TX_4W=y
# CONFIG_ATM_ENI_BURST_TX_2W is not set
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
# CONFIG_ATM_ENI_BURST_RX_4W is not set
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_ISERIES_VETH=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_ISDN=y
# CONFIG_MISDN is not set
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_AUDIO is not set
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
CONFIG_HISAX_NO_LLC=y
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_W6692=y
# CONFIG_HISAX_HFC_SX is not set
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_GIGASET=y
# CONFIG_GIGASET_BASE is not set
# CONFIG_GIGASET_M105 is not set
CONFIG_GIGASET_M101=y
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
# CONFIG_ISDN_CAPI_CAPIFS_BOOL is not set
# CONFIG_ISDN_CAPI_CAPIDRV is not set
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_SX is not set
CONFIG_RIO=y
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=y
CONFIG_ISTALLION=y
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_ICOM=y
# CONFIG_SERIAL_TXX9 is not set
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_ISERIES=y
CONFIG_HVC_RTAS=y
CONFIG_HVC_BEAT=y
CONFIG_HVC_UDBG=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PASEMI=y
CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_XILINX=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_WM8350_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_BQ27x00=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_UCB1400_CORE=y
CONFIG_TPS65010=y
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_UNINORTH is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
# CONFIG_FB_SM501 is not set
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_PS3 is not set
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_FB_LOGO_EXTRA=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=y
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS5530=y
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=y
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_FM801=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=y
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_MAESTRO3=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=y
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=y
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=y
CONFIG_SND_POWERMAC_AUTO_DRC=y
# CONFIG_SND_PS3 is not set
# CONFIG_SND_AOA is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SOC_ALL_CODECS=y
CONFIG_SND_SOC_AD73311=y
CONFIG_SND_SOC_AK4535=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_L3=y
CONFIG_SND_SOC_PCM3008=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC26=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TWL4030=y
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
CONFIG_SND_SOC_WM8350=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8900=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8971=y
CONFIG_SND_SOC_WM8990=y
CONFIG_SOUND_PRIME=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
CONFIG_HID_SUNPLUS=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETMOTORCONTROL is not set
CONFIG_USB_PHIDGETSERVO=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_TWL4030_USB is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_WLP is not set
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM8350=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_PASEMI=y
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM8350=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ECRYPT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
CONFIG_PPC_EARLY_DEBUG_G5=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-06 16:58 2.6.29-rc3-git9 build break : arch/powerpc/platforms/ps3/setup.o Sachin P. Sant @ 2009-02-07 2:42 ` Geoff Levand 2009-02-07 17:41 ` Sachin P. Sant 2009-02-08 11:29 ` Michael Ellerman 0 siblings, 2 replies; 11+ messages in thread From: Geoff Levand @ 2009-02-07 2:42 UTC (permalink / raw) To: Benjamin Herrenschmidt; +Cc: Mel Gorman, linuxppc-dev, Kamalesh Babulal Change the PS3 platform code to use hard coded numbers for its LV1 device types. The PS3 platform code was incorrectly using some scsi block constants for the device type returned from the LV1 hypervisor. Fixes build errors like these when CONFIG_BLOCK=n: In file included from include/scsi/scsi.h:12, from arch/powerpc/platforms/ps3/platform.h:25, from arch/powerpc/platforms/ps3/setup.c:36: include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> --- Ben, Please send upstream for 2.6.29. -Geoff arch/powerpc/platforms/ps3/platform.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -22,8 +22,6 @@ #define _PS3_PLATFORM_H #include <linux/rtc.h> -#include <scsi/scsi.h> - #include <asm/ps3.h> /* htab */ @@ -83,12 +81,12 @@ enum ps3_bus_type { }; enum ps3_dev_type { - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */ PS3_DEV_TYPE_SB_GELIC = 3, PS3_DEV_TYPE_SB_USB = 4, - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */ PS3_DEV_TYPE_SB_GPIO = 6, - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */ }; int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-07 2:42 ` [patch] powerpc/ps3: Use hard coded values for LV1 device type Geoff Levand @ 2009-02-07 17:41 ` Sachin P. Sant 2009-02-08 11:29 ` Michael Ellerman 1 sibling, 0 replies; 11+ messages in thread From: Sachin P. Sant @ 2009-02-07 17:41 UTC (permalink / raw) To: Geoff Levand; +Cc: Mel Gorman, Kamalesh Babulal, linuxppc-dev Geoff Levand wrote: > Change the PS3 platform code to use hard coded numbers for its > LV1 device types. > > The PS3 platform code was incorrectly using some scsi block > constants for the device type returned from the LV1 hypervisor. > > Fixes build errors like these when CONFIG_BLOCK=n: > > In file included from include/scsi/scsi.h:12, > from arch/powerpc/platforms/ps3/platform.h:25, > from arch/powerpc/platforms/ps3/setup.c:36: > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> > --- Thanks Geoff. This fixes the issue. Tested-by : Sachin Sant <sachinp@in.ibm.com> -- --------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India --------------------------------- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-07 2:42 ` [patch] powerpc/ps3: Use hard coded values for LV1 device type Geoff Levand 2009-02-07 17:41 ` Sachin P. Sant @ 2009-02-08 11:29 ` Michael Ellerman 2009-02-09 0:11 ` Benjamin Herrenschmidt 1 sibling, 1 reply; 11+ messages in thread From: Michael Ellerman @ 2009-02-08 11:29 UTC (permalink / raw) To: Geoff Levand; +Cc: Mel Gorman, Kamalesh Babulal, linuxppc-dev [-- Attachment #1: Type: text/plain, Size: 2128 bytes --] On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote: > Change the PS3 platform code to use hard coded numbers for its > LV1 device types. > > The PS3 platform code was incorrectly using some scsi block > constants for the device type returned from the LV1 hypervisor. > > Fixes build errors like these when CONFIG_BLOCK=n: > > In file included from include/scsi/scsi.h:12, > from arch/powerpc/platforms/ps3/platform.h:25, > from arch/powerpc/platforms/ps3/setup.c:36: > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> > --- > Ben, > > Please send upstream for 2.6.29. > > -Geoff > > arch/powerpc/platforms/ps3/platform.h | 8 +++----- > 1 file changed, 3 insertions(+), 5 deletions(-) > > --- a/arch/powerpc/platforms/ps3/platform.h > +++ b/arch/powerpc/platforms/ps3/platform.h > @@ -22,8 +22,6 @@ > #define _PS3_PLATFORM_H > > #include <linux/rtc.h> > -#include <scsi/scsi.h> > - > #include <asm/ps3.h> > > /* htab */ > @@ -83,12 +81,12 @@ enum ps3_bus_type { > }; > > enum ps3_dev_type { > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */ > PS3_DEV_TYPE_SB_GELIC = 3, > PS3_DEV_TYPE_SB_USB = 4, > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */ > PS3_DEV_TYPE_SB_GPIO = 6, > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */ This looks like you're just papering over the bug, by hardcoding the same values that are in the scsi header. Or are they really independent, in which case I'd say the comments are confusing. cheers -- Michael Ellerman OzLabs, IBM Australia Development Lab wwweb: http://michael.ellerman.id.au phone: +61 2 6212 1183 (tie line 70 21183) We do not inherit the earth from our ancestors, we borrow it from our children. - S.M.A.R.T Person [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 197 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-08 11:29 ` Michael Ellerman @ 2009-02-09 0:11 ` Benjamin Herrenschmidt 2009-02-09 3:59 ` James Bottomley 0 siblings, 1 reply; 11+ messages in thread From: Benjamin Herrenschmidt @ 2009-02-09 0:11 UTC (permalink / raw) To: michael Cc: Mel Gorman, Kamalesh Babulal, James Bottomley, linuxppc-dev, Jens Axboe On Sun, 2009-02-08 at 22:29 +1100, Michael Ellerman wrote: > On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote: > > Change the PS3 platform code to use hard coded numbers for its > > LV1 device types. > > > > The PS3 platform code was incorrectly using some scsi block > > constants for the device type returned from the LV1 hypervisor. > > > > Fixes build errors like these when CONFIG_BLOCK=n: > > > > In file included from include/scsi/scsi.h:12, > > from arch/powerpc/platforms/ps3/platform.h:25, > > from arch/powerpc/platforms/ps3/setup.c:36: > > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined > > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB Adding Jens and James on CC since I think a proper fix lies in blkdev.h or scsi*.h So basically, the whole of blkdev.h is inside a big ifdef CONFIG_BLOCK... which means that scsi_cmnd.h can't build which in turn makes scsi.h fail. The PS3 platform code wants to use some of the standard SCSI types from there though, as they are part of the hypervisor ABI. (And in fact it can be argued that non-block devices using SCSI do exist, such as scanners, no ?) Any reason other than pre-historical to have blkdev.h shielded like that ? Cheers, Ben. > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> > > --- > > Ben, > > > > Please send upstream for 2.6.29. > > > > -Geoff > > > > arch/powerpc/platforms/ps3/platform.h | 8 +++----- > > 1 file changed, 3 insertions(+), 5 deletions(-) > > > > --- a/arch/powerpc/platforms/ps3/platform.h > > +++ b/arch/powerpc/platforms/ps3/platform.h > > @@ -22,8 +22,6 @@ > > #define _PS3_PLATFORM_H > > > > #include <linux/rtc.h> > > -#include <scsi/scsi.h> > > - > > #include <asm/ps3.h> > > > > /* htab */ > > @@ -83,12 +81,12 @@ enum ps3_bus_type { > > }; > > > > enum ps3_dev_type { > > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ > > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */ > > PS3_DEV_TYPE_SB_GELIC = 3, > > PS3_DEV_TYPE_SB_USB = 4, > > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ > > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */ > > PS3_DEV_TYPE_SB_GPIO = 6, > > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ > > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */ > > This looks like you're just papering over the bug, by hardcoding the > same values that are in the scsi header. Or are they really independent, > in which case I'd say the comments are confusing. > > cheers > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-09 0:11 ` Benjamin Herrenschmidt @ 2009-02-09 3:59 ` James Bottomley 0 siblings, 0 replies; 11+ messages in thread From: James Bottomley @ 2009-02-09 3:59 UTC (permalink / raw) To: Benjamin Herrenschmidt Cc: michael, Geoff Levand, Mel Gorman, linuxppc-dev, Kamalesh Babulal, Jens Axboe, linux-scsi On Mon, 2009-02-09 at 11:11 +1100, Benjamin Herrenschmidt wrote: > On Sun, 2009-02-08 at 22:29 +1100, Michael Ellerman wrote: > > On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote: > > > Change the PS3 platform code to use hard coded numbers for its > > > LV1 device types. > > > > > > The PS3 platform code was incorrectly using some scsi block > > > constants for the device type returned from the LV1 hypervisor. > > > > > > Fixes build errors like these when CONFIG_BLOCK=n: > > > > > > In file included from include/scsi/scsi.h:12, > > > from arch/powerpc/platforms/ps3/platform.h:25, > > > from arch/powerpc/platforms/ps3/setup.c:36: > > > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined > > > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB > > Adding Jens and James on CC since I think a proper fix lies in blkdev.h > or scsi*.h And cc'd linux-scsi > So basically, the whole of blkdev.h is inside a big ifdef > CONFIG_BLOCK... which means that scsi_cmnd.h can't build which in turn > makes scsi.h fail. Well, look at it from our point of view; it's impossible to build SCSI without block, so a little interdependence is easy to get. > The PS3 platform code wants to use some of the standard SCSI types from > there though, as they are part of the hypervisor ABI. (And in fact it > can be argued that non-block devices using SCSI do exist, such as > scanners, no ?) > > Any reason other than pre-historical to have blkdev.h shielded like > that ? Actually, I think the fix lies in scsi.h ... we can make that into a nicely independent protocol header file. Your current woes come because it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix it. Can the rest of linux-scsi verify that the fix below doesn't break something else? I found one cockup: block/cmd-filter.c is apparently not including linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. > Cheers, > Ben. > > > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> > > > --- > > > Ben, > > > > > > Please send upstream for 2.6.29. > > > > > > -Geoff > > > > > > arch/powerpc/platforms/ps3/platform.h | 8 +++----- > > > 1 file changed, 3 insertions(+), 5 deletions(-) > > > > > > --- a/arch/powerpc/platforms/ps3/platform.h > > > +++ b/arch/powerpc/platforms/ps3/platform.h > > > @@ -22,8 +22,6 @@ > > > #define _PS3_PLATFORM_H > > > > > > #include <linux/rtc.h> > > > -#include <scsi/scsi.h> > > > - > > > #include <asm/ps3.h> > > > > > > /* htab */ > > > @@ -83,12 +81,12 @@ enum ps3_bus_type { > > > }; > > > > > > enum ps3_dev_type { > > > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ > > > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */ > > > PS3_DEV_TYPE_SB_GELIC = 3, > > > PS3_DEV_TYPE_SB_USB = 4, > > > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ > > > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */ > > > PS3_DEV_TYPE_SB_GPIO = 6, > > > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ > > > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */ > > > > This looks like you're just papering over the bug, by hardcoding the > > same values that are in the scsi header. Or are they really independent, > > in which case I'd say the comments are confusing. > > > > cheers James --- diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 504b275..572bbc2 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -22,6 +22,7 @@ #include <linux/spinlock.h> #include <linux/capability.h> #include <linux/bitops.h> +#include <linux/blkdev.h> #include <scsi/scsi.h> #include <linux/cdrom.h> diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 80d7f60..084478e 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -9,7 +9,8 @@ #define _SCSI_SCSI_H #include <linux/types.h> -#include <scsi/scsi_cmnd.h> + +struct scsi_cmnd; /* * The maximum number of SG segments that we will put inside a @@ -439,22 +440,6 @@ static inline int scsi_is_wlun(unsigned int lun) #define host_byte(result) (((result) >> 16) & 0xff) #define driver_byte(result) (((result) >> 24) & 0xff) -static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 8; -} - -static inline void set_host_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 16; -} - -static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 24; -} - - #define sense_class(sense) (((sense) >> 4) & 0x7) #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 855bf95..43b50d3 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -291,4 +291,19 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) +static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 8; +} + +static inline void set_host_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 16; +} + +static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 24; +} + #endif /* _SCSI_SCSI_CMND_H */ ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type @ 2009-02-09 3:59 ` James Bottomley 0 siblings, 0 replies; 11+ messages in thread From: James Bottomley @ 2009-02-09 3:59 UTC (permalink / raw) To: Benjamin Herrenschmidt Cc: linux-scsi, Mel Gorman, Kamalesh Babulal, linuxppc-dev, Jens Axboe On Mon, 2009-02-09 at 11:11 +1100, Benjamin Herrenschmidt wrote: > On Sun, 2009-02-08 at 22:29 +1100, Michael Ellerman wrote: > > On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote: > > > Change the PS3 platform code to use hard coded numbers for its > > > LV1 device types. > > > > > > The PS3 platform code was incorrectly using some scsi block > > > constants for the device type returned from the LV1 hypervisor. > > > > > > Fixes build errors like these when CONFIG_BLOCK=n: > > > > > > In file included from include/scsi/scsi.h:12, > > > from arch/powerpc/platforms/ps3/platform.h:25, > > > from arch/powerpc/platforms/ps3/setup.c:36: > > > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined > > > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB > > Adding Jens and James on CC since I think a proper fix lies in blkdev.h > or scsi*.h And cc'd linux-scsi > So basically, the whole of blkdev.h is inside a big ifdef > CONFIG_BLOCK... which means that scsi_cmnd.h can't build which in turn > makes scsi.h fail. Well, look at it from our point of view; it's impossible to build SCSI without block, so a little interdependence is easy to get. > The PS3 platform code wants to use some of the standard SCSI types from > there though, as they are part of the hypervisor ABI. (And in fact it > can be argued that non-block devices using SCSI do exist, such as > scanners, no ?) > > Any reason other than pre-historical to have blkdev.h shielded like > that ? Actually, I think the fix lies in scsi.h ... we can make that into a nicely independent protocol header file. Your current woes come because it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix it. Can the rest of linux-scsi verify that the fix below doesn't break something else? I found one cockup: block/cmd-filter.c is apparently not including linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. > Cheers, > Ben. > > > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> > > > --- > > > Ben, > > > > > > Please send upstream for 2.6.29. > > > > > > -Geoff > > > > > > arch/powerpc/platforms/ps3/platform.h | 8 +++----- > > > 1 file changed, 3 insertions(+), 5 deletions(-) > > > > > > --- a/arch/powerpc/platforms/ps3/platform.h > > > +++ b/arch/powerpc/platforms/ps3/platform.h > > > @@ -22,8 +22,6 @@ > > > #define _PS3_PLATFORM_H > > > > > > #include <linux/rtc.h> > > > -#include <scsi/scsi.h> > > > - > > > #include <asm/ps3.h> > > > > > > /* htab */ > > > @@ -83,12 +81,12 @@ enum ps3_bus_type { > > > }; > > > > > > enum ps3_dev_type { > > > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ > > > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */ > > > PS3_DEV_TYPE_SB_GELIC = 3, > > > PS3_DEV_TYPE_SB_USB = 4, > > > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ > > > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */ > > > PS3_DEV_TYPE_SB_GPIO = 6, > > > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ > > > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */ > > > > This looks like you're just papering over the bug, by hardcoding the > > same values that are in the scsi header. Or are they really independent, > > in which case I'd say the comments are confusing. > > > > cheers James --- diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 504b275..572bbc2 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -22,6 +22,7 @@ #include <linux/spinlock.h> #include <linux/capability.h> #include <linux/bitops.h> +#include <linux/blkdev.h> #include <scsi/scsi.h> #include <linux/cdrom.h> diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 80d7f60..084478e 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -9,7 +9,8 @@ #define _SCSI_SCSI_H #include <linux/types.h> -#include <scsi/scsi_cmnd.h> + +struct scsi_cmnd; /* * The maximum number of SG segments that we will put inside a @@ -439,22 +440,6 @@ static inline int scsi_is_wlun(unsigned int lun) #define host_byte(result) (((result) >> 16) & 0xff) #define driver_byte(result) (((result) >> 24) & 0xff) -static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 8; -} - -static inline void set_host_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 16; -} - -static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 24; -} - - #define sense_class(sense) (((sense) >> 4) & 0x7) #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 855bf95..43b50d3 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -291,4 +291,19 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) +static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 8; +} + +static inline void set_host_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 16; +} + +static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 24; +} + #endif /* _SCSI_SCSI_CMND_H */ ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-09 3:59 ` James Bottomley @ 2009-02-10 22:46 ` Geoff Levand -1 siblings, 0 replies; 11+ messages in thread From: Geoff Levand @ 2009-02-10 22:46 UTC (permalink / raw) To: James Bottomley Cc: Benjamin Herrenschmidt, michael, Mel Gorman, linuxppc-dev, Kamalesh Babulal, Jens Axboe, linux-scsi James Bottomley wrote: > On Mon, 2009-02-09 at 11:11 +1100, Benjamin Herrenschmidt wrote: >> The PS3 platform code wants to use some of the standard SCSI types from >> there though, as they are part of the hypervisor ABI. (And in fact it >> can be argued that non-block devices using SCSI do exist, such as >> scanners, no ?) >> >> Any reason other than pre-historical to have blkdev.h shielded like >> that ? > > Actually, I think the fix lies in scsi.h ... we can make that into a > nicely independent protocol header file. Your current woes come because > it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix > it. > > Can the rest of linux-scsi verify that the fix below doesn't break > something else? > > I found one cockup: block/cmd-filter.c is apparently not including > linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. ... > diff --git a/block/cmd-filter.c b/block/cmd-filter.c > diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h I tested this scsi header fix on PS3 and it fixes the BLK_MAX_CDB not defined build error when CONFIG_BLOCK=n. Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type @ 2009-02-10 22:46 ` Geoff Levand 0 siblings, 0 replies; 11+ messages in thread From: Geoff Levand @ 2009-02-10 22:46 UTC (permalink / raw) To: James Bottomley Cc: linux-scsi, Mel Gorman, Kamalesh Babulal, linuxppc-dev, Jens Axboe James Bottomley wrote: > On Mon, 2009-02-09 at 11:11 +1100, Benjamin Herrenschmidt wrote: >> The PS3 platform code wants to use some of the standard SCSI types from >> there though, as they are part of the hypervisor ABI. (And in fact it >> can be argued that non-block devices using SCSI do exist, such as >> scanners, no ?) >> >> Any reason other than pre-historical to have blkdev.h shielded like >> that ? > > Actually, I think the fix lies in scsi.h ... we can make that into a > nicely independent protocol header file. Your current woes come because > it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix > it. > > Can the rest of linux-scsi verify that the fix below doesn't break > something else? > > I found one cockup: block/cmd-filter.c is apparently not including > linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. ... > diff --git a/block/cmd-filter.c b/block/cmd-filter.c > diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h I tested this scsi header fix on PS3 and it fixes the BLK_MAX_CDB not defined build error when CONFIG_BLOCK=n. Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type 2009-02-09 3:59 ` James Bottomley @ 2009-02-11 5:28 ` Sachin P. Sant -1 siblings, 0 replies; 11+ messages in thread From: Sachin P. Sant @ 2009-02-11 5:28 UTC (permalink / raw) To: James Bottomley Cc: Benjamin Herrenschmidt, linux-scsi, Mel Gorman, Kamalesh Babulal, linuxppc-dev, Jens Axboe James Bottomley wrote: > Actually, I think the fix lies in scsi.h ... we can make that into a > nicely independent protocol header file. Your current woes come because > it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix > it. > > Can the rest of linux-scsi verify that the fix below doesn't break > something else? > > I found one cockup: block/cmd-filter.c is apparently not including > linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. > Tested the patch and it fixes the issue. Thanks -Sachin -- --------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India --------------------------------- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type @ 2009-02-11 5:28 ` Sachin P. Sant 0 siblings, 0 replies; 11+ messages in thread From: Sachin P. Sant @ 2009-02-11 5:28 UTC (permalink / raw) To: James Bottomley Cc: linux-scsi, Mel Gorman, Kamalesh Babulal, linuxppc-dev, Jens Axboe James Bottomley wrote: > Actually, I think the fix lies in scsi.h ... we can make that into a > nicely independent protocol header file. Your current woes come because > it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix > it. > > Can the rest of linux-scsi verify that the fix below doesn't break > something else? > > I found one cockup: block/cmd-filter.c is apparently not including > linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up. > Tested the patch and it fixes the issue. Thanks -Sachin -- --------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India --------------------------------- ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2009-02-11 5:28 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-02-06 16:58 2.6.29-rc3-git9 build break : arch/powerpc/platforms/ps3/setup.o Sachin P. Sant 2009-02-07 2:42 ` [patch] powerpc/ps3: Use hard coded values for LV1 device type Geoff Levand 2009-02-07 17:41 ` Sachin P. Sant 2009-02-08 11:29 ` Michael Ellerman 2009-02-09 0:11 ` Benjamin Herrenschmidt 2009-02-09 3:59 ` James Bottomley 2009-02-09 3:59 ` James Bottomley 2009-02-10 22:46 ` Geoff Levand 2009-02-10 22:46 ` Geoff Levand 2009-02-11 5:28 ` Sachin P. Sant 2009-02-11 5:28 ` Sachin P. Sant
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.