[PATCH 1/2] at91_ide: remove custom tf_{ead|load}() methods

[PATCH 1/2] at91_ide: remove custom tf_{ead|load}() methods

[Sergei Shtylyov]

Since tf_{read|load}() methods of this driver have now become identical to their
standard counterparts using MMIO accesses, there's no need to override those
anymore...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is against the current Linus' tree...

 drivers/ide/at91_ide.c |   78 +------------------------------------------------
 1 files changed, 2 insertions(+), 76 deletions(-)

Index: linux-2.6/drivers/ide/at91_ide.c
===================================================================
--- linux-2.6.orig/drivers/ide/at91_ide.c
+++ linux-2.6/drivers/ide/at91_ide.c
@@ -185,80 +185,6 @@ static void ide_mm_outb(u8 value, unsign
 	writeb(value, (void __iomem *) port);
 }
 
-static void at91_ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	struct ide_taskfile *tf = &cmd->tf;
-	u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
-	if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
-		HIHI = 0xFF;
-
-	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
-		ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
-		ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
-		ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
-		ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
-		ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
-
-	if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
-		ide_mm_outb(tf->feature, io_ports->feature_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
-		ide_mm_outb(tf->nsect, io_ports->nsect_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
-		ide_mm_outb(tf->lbal, io_ports->lbal_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
-		ide_mm_outb(tf->lbam, io_ports->lbam_addr);
-	if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
-		ide_mm_outb(tf->lbah, io_ports->lbah_addr);
-
-	if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
-		ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
-}
-
-static void at91_ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	struct ide_taskfile *tf = &cmd->tf;
-
-	/* be sure we're looking at the low order bits */
-	ide_mm_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
-	if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
-		tf->error  = ide_mm_inb(io_ports->feature_addr);
-	if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
-		tf->nsect  = ide_mm_inb(io_ports->nsect_addr);
-	if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
-		tf->lbal   = ide_mm_inb(io_ports->lbal_addr);
-	if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
-		tf->lbam   = ide_mm_inb(io_ports->lbam_addr);
-	if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
-		tf->lbah   = ide_mm_inb(io_ports->lbah_addr);
-	if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
-		tf->device = ide_mm_inb(io_ports->device_addr);
-
-	if (cmd->tf_flags & IDE_TFLAG_LBA48) {
-		ide_mm_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
-			tf->hob_error = ide_mm_inb(io_ports->feature_addr);
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
-			tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
-			tf->hob_lbal  = ide_mm_inb(io_ports->lbal_addr);
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
-			tf->hob_lbam  = ide_mm_inb(io_ports->lbam_addr);
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
-			tf->hob_lbah  = ide_mm_inb(io_ports->lbah_addr);
-	}
-}
-
 static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	struct ide_timing *timing;
@@ -284,8 +210,8 @@ static const struct ide_tp_ops at91_ide_
 	.write_devctl	= ide_write_devctl,
 
 	.dev_select	= ide_dev_select,
-	.tf_load	= at91_ide_tf_load,
-	.tf_read	= at91_ide_tf_read,
+	.tf_load	= ide_tf_load,
+	.tf_read	= ide_tf_read,
 
 	.input_data	= at91_ide_input_data,
 	.output_data	= at91_ide_output_data,

Re: [PATCH 1/2] at91_ide: remove custom tf_{ead|load}() methods

[Sergei Shtylyov]

Hello, I wrote:

> Since tf_{read|load}() methods of this driver have now become identical to their
> standard counterparts using MMIO accesses, there's no need to override those
> anymore...

> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

    Oops, the subject should've had "read" ISO "ead" -- I'll repost...

MBR, Sergei