[ath9k-devel] Progress on Ath9k HT support on Adhoc mode

[Robert Chan <robert.chan.list@gmail.com>]

Dear all,

After some research done on ath9k's support of HT on Adhoc mode, I found on 
the mac80211 driver page (http://wireless.kernel.org/en/users/Drivers) that 
ath9k seems to support IBSS *and/or* mesh *and/or* 802.11N:

Driver    Manufacturer    cfg80211    AP    IBSS    mesh    monitor    PHY 
modes    Buses
ath9k     Atheros    yes     yes     yes     yes     yes     A/B/G/N     PCI 
/ PCI-E / AHB /     PCMCIA

So should I assume that the details here are "too updated" or are the modes 
above are only independently supported (but not able to work together such 
as IBSS + N + mesh)?

Any clarification will be very much appreciated.

Regards,

Robert

--------------------------------------------------
From: "Robert Chan" <robert.chan.list@gmail.com>
Sent: Wednesday, December 22, 2010 4:25 PM
To: "Alexander Simon" <simon_alex@web.de>; <ath9k-devel@lists.ath9k.org>
Subject: Re: [ath9k-devel] Progress on Ath9k HT support on Adhoc mode

> Hi All,
>
> May I ask whether the HT support (for Adhoc) is already in the trunk?
>
> Thanks.
>
> Regards,
>
> Robert
>
>
> --------------------------------------------------
> From: "Alexander Simon" <simon_alex@web.de>
> Sent: Thursday, December 09, 2010 8:36 PM
> To: <ath9k-devel@lists.ath9k.org>
> Subject: Re: [ath9k-devel] Progress on Ath9k HT support on Adhoc mode
>
>> Im working on it.
>>
>> I took the initial patches vom Benoit Papillault. Right now, i have two 
>> cells
>> deploy and read HT beacons and have them entered into the sta_info 
>> structure.
>> Minstrel_ht also seems to drive at HT rates. I hope I can provide a first
>> patch tomorrow, as at the moment I also have problems with txpower.
>>
>> Greetings, Alex
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel at lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>
>