* atkbd.c: Unknown key pressed/released
@ 2009-05-09 6:35 Németh Márton
2009-05-09 13:47 ` Dmitry Torokhov
0 siblings, 1 reply; 2+ messages in thread
From: Németh Márton @ 2009-05-09 6:35 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input
[-- Attachment #1: Type: text/plain, Size: 654 bytes --]
Hi,
I have a Clevo D410J laptop (see dmidecode output attached). When I press the
"Application Launch" special key I get the following message in dmesg:
[ 60.865561] atkbd.c: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0).
[ 60.865574] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 60.967948] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 60.967962] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
Is it possible to add support for the "Application Launch" key directly
in the kernel? I am currently running Linux kernel 2.6.30-rc5.
Regards,
Márton Németh
[-- Attachment #2: dmidecode-Clevo-D410J.txt --]
[-- Type: text/plain, Size: 10595 bytes --]
# dmidecode 2.9
SMBIOS 2.34 present.
39 structures occupying 956 bytes.
Table at 0x000D8010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix
Version: 4.06CJ15
Release Date: 12/08/2004
Address: 0xE4540
Runtime Size: 113344 bytes
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: VIA
Product Name: K8N800
Version: VT8204B
Serial Number: 000001
UUID: 0090F53E-5ACA-0000-0000-000000000000
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: VIA
Product Name: K8N800
Version: None
Serial Number: None
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: No Enclosure
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 754
Type: Central Processor
Family: Sempron
Manufacturer: AuthenticAMD
ID: C0 0F 01 00 FF FB 8B 07
Signature: Family 15, Model 28, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: Mobile Sempron
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 2500 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Through
Location: External
Installed Size: 128 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Primary IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Secondary IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: COM1
External Connector Type: DB-9 male
Port Type: Serial Port XT/AT Compatible
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: COM2
External Connector Type: DB-9 male
Port Type: Serial Port XT/AT Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Printer
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: KBD
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CD_IN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Game Port
External Connector Type: DB-15 female
Port Type: Joystick Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: MIC_IN
External Connector Type: RJ-11
Port Type: MIDI Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: LINE_IN
External Connector Type: RJ-11
Port Type: MIDI Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: LINE_OUT
External Connector Type: RJ-11
Port Type: MIDI Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FC
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: MIDI Port
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0018, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot 1
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot 2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot 3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot 4
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001C, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: VIA 8235 Sound
Handle 0x001D, DMI type 11, 5 bytes
OEM Strings
String 1: VIA
String 2: www.via.com.tw
String 3: w3.via.com.tw
Handle 0x001E, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001F, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: S1
Bank Locator: Bank 1
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0020, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 1024 MB
Form Factor: DIMM
Set: 2
Locator: S2
Bank Locator: Bank 2
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0021, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x001E
Partition Width: 0
Handle 0x0022, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001F
Memory Array Mapped Address Handle: 0x0001
Partition Row Position: 1
Handle 0x0023, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0024, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Enabled
Front Panel Reset Status: Unknown
Handle 0x0025, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0026, DMI type 127, 4 bytes
End Of Table
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: atkbd.c: Unknown key pressed/released
2009-05-09 6:35 atkbd.c: Unknown key pressed/released Németh Márton
@ 2009-05-09 13:47 ` Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2009-05-09 13:47 UTC (permalink / raw)
To: Németh Márton; +Cc: linux-input
On Friday 08 May 2009 23:35:50 Németh Márton wrote:
> Hi,
>
> I have a Clevo D410J laptop (see dmidecode output attached). When I press
> the "Application Launch" special key I get the following message in dmesg:
>
> [ 60.865561] atkbd.c: Unknown key pressed (translated set 2, code 0x81 on
> isa0060/serio0). [ 60.865574] atkbd.c: Use 'setkeycodes e001 <keycode>'
> to make it known. [ 60.967948] atkbd.c: Unknown key released (translated
> set 2, code 0x81 on isa0060/serio0). [ 60.967962] atkbd.c: Use
> 'setkeycodes e001 <keycode>' to make it known.
>
> Is it possible to add support for the "Application Launch" key directly
> in the kernel? I am currently running Linux kernel 2.6.30-rc5.
>
This should be done in HAL, not in kernel. Please see here:
http://people.freedesktop.org/~hughsient/quirk/
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-05-09 13:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-05-09 6:35 atkbd.c: Unknown key pressed/released Németh Márton
2009-05-09 13:47 ` Dmitry Torokhov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.