From: Michael Riepe <michael.riepe@googlemail.com>
To: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Michael Buesch" <mb@bu3sch.de>,
"David Dillow" <dave@thedillows.org>,
"Francois Romieu" <romieu@fr.zoreil.com>,
"Rui Santos" <rsantos@grupopie.com>,
"Michael Büker" <m.bueker@berlin.de>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too
Date: Tue, 12 May 2009 23:45:55 +0200 [thread overview]
Message-ID: <4A09EE13.3020102@googlemail.com> (raw)
In-Reply-To: <m3eiuufufj.fsf@intrepid.localdomain>
Krzysztof Halasa wrote:
> Michael Buesch <mb@bu3sch.de> writes:
>
>
>>Yeah maybe other chips are affected as well.
>>I just want to note that my failing chip/board is an Intel D945GCLF2 board
>>with onboard G-LAN, too.
>>
>>The device XID is: XID 3c4000c0
>
>
> I have an on-board RTL8111C (at least the docs say so) with this same
> XID and it's working correctly.
How do lspci and dmesg report the chip? For mine, lspci says it's a
"RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)" while
the kernel reports "RTL8168c/8111c at 0xffffc200000f6000,
00:1c:c0:b6:1a:4a, XID 3c4000c0".
This reminds me of the early ATA/USB bridges from Genesys Logic... many
revisions, and each one broken in a different way. :-(
--
Michael "Tired" Riepe <michael.riepe@googlemail.com>
X-Tired: Each morning I get up I die a little
next prev parent reply other threads:[~2009-05-12 21:46 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-04 17:28 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Michael Büker
2009-03-04 22:43 ` Francois Romieu
2009-03-06 0:17 ` Michael Büker
2009-03-08 10:27 ` Tom Weber
2009-03-10 5:42 ` Tom Weber
2009-03-09 12:07 ` Rui Santos
2009-03-13 18:29 ` Rui Santos
2009-03-16 13:07 ` Rui Santos
2009-03-22 21:12 ` Francois Romieu
2009-03-22 21:19 ` Michael Buesch
2009-03-22 22:00 ` Francois Romieu
2009-03-22 22:09 ` Michael Buesch
2009-03-22 22:27 ` Francois Romieu
2009-03-22 22:38 ` Michael Buesch
2009-03-23 11:47 ` Michael Buesch
2009-03-23 12:47 ` Michael Buesch
2009-03-23 23:47 ` Francois Romieu
2009-03-24 9:43 ` Michael Buesch
2009-03-23 14:29 ` Michael Büker
2009-03-23 14:57 ` Rui Santos
2009-03-23 15:04 ` Michael Büker
2009-03-25 11:40 ` Rui Santos
2009-04-04 17:50 ` Michael Buesch
2009-05-10 13:38 ` Michael Riepe
2009-05-10 15:01 ` Michael S. Zick
2009-05-10 15:10 ` Michael S. Zick
2009-05-10 15:53 ` Michael Buesch
2009-05-10 16:27 ` Michael Riepe
2009-05-10 17:09 ` Michael S. Zick
2009-05-11 0:29 ` David Dillow
2009-05-11 20:48 ` Michael Buesch
2009-05-11 21:10 ` Michael Buesch
2009-05-11 21:29 ` David Dillow
2009-05-11 21:59 ` Michael Buesch
2009-05-12 20:29 ` Michael Riepe
2009-05-14 2:38 ` David Dillow
2009-05-14 18:37 ` Michael Riepe
2009-05-14 19:14 ` David Dillow
2009-05-14 19:42 ` Michael Riepe
2009-05-23 1:29 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts David Dillow
2009-05-23 9:24 ` Michael Buesch
2009-05-23 14:35 ` Michael Riepe
2009-05-23 14:44 ` Michael Buesch
2009-05-23 15:01 ` Michael Riepe
2009-05-23 16:40 ` Michael Buesch
2009-05-23 14:51 ` David Dillow
2009-05-23 16:12 ` Michael Riepe
2009-05-23 16:45 ` Michael Buesch
2009-05-23 16:46 ` David Dillow
2009-05-23 16:50 ` Michael Buesch
2009-05-23 16:53 ` Michael Riepe
2009-05-23 17:03 ` David Dillow
2009-05-24 21:15 ` Francois Romieu
2009-05-24 22:55 ` David Dillow
2009-05-26 5:55 ` David Miller
2009-05-26 18:22 ` Michael Buesch
2009-05-26 21:52 ` David Miller
2009-05-26 22:14 ` David Miller
2009-05-26 22:40 ` Michael Riepe
2009-05-26 22:43 ` David Miller
2009-05-26 23:10 ` David Miller
2009-05-27 16:19 ` Michael Buesch
2009-06-16 19:32 ` Rui Santos
2009-08-21 20:57 ` Eric W. Biederman
2009-08-21 21:22 ` Michael Riepe
2009-08-21 22:59 ` David Dillow
2009-08-21 23:34 ` David Dillow
2009-08-22 0:24 ` Eric W. Biederman
2009-08-22 11:48 ` Eric W. Biederman
2009-08-22 12:07 ` Eric W. Biederman
2009-08-22 20:43 ` David Dillow
2009-08-23 17:17 ` Jarek Poplawski
2009-08-23 17:43 ` Michal Soltys
2009-08-23 17:54 ` Jarek Poplawski
2009-08-24 2:37 ` Eric W. Biederman
2009-08-25 0:51 ` Eric W. Biederman
2009-08-25 2:59 ` David Dillow
2009-08-25 20:22 ` Eric W. Biederman
2009-08-25 20:40 ` David Dillow
2009-08-25 21:24 ` Eric W. Biederman
2009-08-25 21:46 ` David Dillow
2009-08-25 22:19 ` Francois Romieu
2009-08-26 3:47 ` Eric W. Biederman
2009-08-26 7:58 ` [PATCH] r8169: Reduce looping in the interrupt handler Eric W. Biederman
2009-08-26 13:56 ` David Dillow
2009-08-26 13:59 ` David Dillow
2009-08-26 20:02 ` Eric W. Biederman
2009-08-26 21:30 ` Francois Romieu
2009-08-26 21:40 ` Eric W. Biederman
2009-08-27 5:24 ` Francois Romieu
2009-08-27 5:38 ` Eric W. Biederman
2009-08-27 23:20 ` Francois Romieu
2009-08-28 1:17 ` Eric W. Biederman
2009-08-28 1:29 ` David Dillow
2009-08-30 20:37 ` Francois Romieu
2009-08-30 20:53 ` Eric W. Biederman
2009-09-01 3:33 ` David Dillow
2009-09-01 9:20 ` Francois Romieu
2009-08-25 21:37 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts Eric W. Biederman
2009-08-25 21:54 ` David Dillow
2009-08-25 23:11 ` Francois Romieu
2009-05-12 11:10 ` 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Krzysztof Halasa
2009-05-12 21:45 ` Michael Riepe [this message]
2009-05-13 6:11 ` Francois Romieu
2009-05-13 6:27 ` Michael Riepe
2009-05-13 19:34 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A09EE13.3020102@googlemail.com \
--to=michael.riepe@googlemail.com \
--cc=dave@thedillows.org \
--cc=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=m.bueker@berlin.de \
--cc=mb@bu3sch.de \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=rsantos@grupopie.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.