From: Michael Riepe <michael.riepe@googlemail.com>
To: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "David Dillow" <dave@thedillows.org>,
"Michael Buesch" <mb@bu3sch.de>,
"Francois Romieu" <romieu@fr.zoreil.com>,
"Rui Santos" <rsantos@grupopie.com>,
"Michael Büker" <m.bueker@berlin.de>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts
Date: Fri, 21 Aug 2009 23:22:25 +0200 [thread overview]
Message-ID: <4A8F1011.7040508@googlemail.com> (raw)
In-Reply-To: <m1skfkrik2.fsf@fess.ebiederm.org>
Hi!
Eric W. Biederman wrote:
> I have what at first glance looks like a problem caused by this
> patch. For the last month since upgrading one of my machines from
> 2.6.28 to 2.6.30 it has been becomming inaccessible from the
> network and I have a few:
>
> NETDEV WATCHDOG: eth0 (r8169): transmit timed out
>
> in my logs and a lot soft lockups that always have rtl8169_interrupt
> as the thing that is running. I suspect your patch has introduced
> a near infinite loop in the interrupt handler and is causing these
> soft lockups.
I've been running 2.6.30 for more than two months now and all is fine.
But this might be a different chip.
--
Michael "Tired" Riepe <michael.riepe@googlemail.com>
X-Tired: Each morning I get up I die a little
next prev parent reply other threads:[~2009-08-21 21:22 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-04 17:28 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Michael Büker
2009-03-04 22:43 ` Francois Romieu
2009-03-06 0:17 ` Michael Büker
2009-03-08 10:27 ` Tom Weber
2009-03-10 5:42 ` Tom Weber
2009-03-09 12:07 ` Rui Santos
2009-03-13 18:29 ` Rui Santos
2009-03-16 13:07 ` Rui Santos
2009-03-22 21:12 ` Francois Romieu
2009-03-22 21:19 ` Michael Buesch
2009-03-22 22:00 ` Francois Romieu
2009-03-22 22:09 ` Michael Buesch
2009-03-22 22:27 ` Francois Romieu
2009-03-22 22:38 ` Michael Buesch
2009-03-23 11:47 ` Michael Buesch
2009-03-23 12:47 ` Michael Buesch
2009-03-23 23:47 ` Francois Romieu
2009-03-24 9:43 ` Michael Buesch
2009-03-23 14:29 ` Michael Büker
2009-03-23 14:57 ` Rui Santos
2009-03-23 15:04 ` Michael Büker
2009-03-25 11:40 ` Rui Santos
2009-04-04 17:50 ` Michael Buesch
2009-05-10 13:38 ` Michael Riepe
2009-05-10 15:01 ` Michael S. Zick
2009-05-10 15:10 ` Michael S. Zick
2009-05-10 15:53 ` Michael Buesch
2009-05-10 16:27 ` Michael Riepe
2009-05-10 17:09 ` Michael S. Zick
2009-05-11 0:29 ` David Dillow
2009-05-11 20:48 ` Michael Buesch
2009-05-11 21:10 ` Michael Buesch
2009-05-11 21:29 ` David Dillow
2009-05-11 21:59 ` Michael Buesch
2009-05-12 20:29 ` Michael Riepe
2009-05-14 2:38 ` David Dillow
2009-05-14 18:37 ` Michael Riepe
2009-05-14 19:14 ` David Dillow
2009-05-14 19:42 ` Michael Riepe
2009-05-23 1:29 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts David Dillow
2009-05-23 9:24 ` Michael Buesch
2009-05-23 14:35 ` Michael Riepe
2009-05-23 14:44 ` Michael Buesch
2009-05-23 15:01 ` Michael Riepe
2009-05-23 16:40 ` Michael Buesch
2009-05-23 14:51 ` David Dillow
2009-05-23 16:12 ` Michael Riepe
2009-05-23 16:45 ` Michael Buesch
2009-05-23 16:46 ` David Dillow
2009-05-23 16:50 ` Michael Buesch
2009-05-23 16:53 ` Michael Riepe
2009-05-23 17:03 ` David Dillow
2009-05-24 21:15 ` Francois Romieu
2009-05-24 22:55 ` David Dillow
2009-05-26 5:55 ` David Miller
2009-05-26 18:22 ` Michael Buesch
2009-05-26 21:52 ` David Miller
2009-05-26 22:14 ` David Miller
2009-05-26 22:40 ` Michael Riepe
2009-05-26 22:43 ` David Miller
2009-05-26 23:10 ` David Miller
2009-05-27 16:19 ` Michael Buesch
2009-06-16 19:32 ` Rui Santos
2009-08-21 20:57 ` Eric W. Biederman
2009-08-21 21:22 ` Michael Riepe [this message]
2009-08-21 22:59 ` David Dillow
2009-08-21 23:34 ` David Dillow
2009-08-22 0:24 ` Eric W. Biederman
2009-08-22 11:48 ` Eric W. Biederman
2009-08-22 12:07 ` Eric W. Biederman
2009-08-22 20:43 ` David Dillow
2009-08-23 17:17 ` Jarek Poplawski
2009-08-23 17:43 ` Michal Soltys
2009-08-23 17:54 ` Jarek Poplawski
2009-08-24 2:37 ` Eric W. Biederman
2009-08-25 0:51 ` Eric W. Biederman
2009-08-25 2:59 ` David Dillow
2009-08-25 20:22 ` Eric W. Biederman
2009-08-25 20:40 ` David Dillow
2009-08-25 21:24 ` Eric W. Biederman
2009-08-25 21:46 ` David Dillow
2009-08-25 22:19 ` Francois Romieu
2009-08-26 3:47 ` Eric W. Biederman
2009-08-26 7:58 ` [PATCH] r8169: Reduce looping in the interrupt handler Eric W. Biederman
2009-08-26 13:56 ` David Dillow
2009-08-26 13:59 ` David Dillow
2009-08-26 20:02 ` Eric W. Biederman
2009-08-26 21:30 ` Francois Romieu
2009-08-26 21:40 ` Eric W. Biederman
2009-08-27 5:24 ` Francois Romieu
2009-08-27 5:38 ` Eric W. Biederman
2009-08-27 23:20 ` Francois Romieu
2009-08-28 1:17 ` Eric W. Biederman
2009-08-28 1:29 ` David Dillow
2009-08-30 20:37 ` Francois Romieu
2009-08-30 20:53 ` Eric W. Biederman
2009-09-01 3:33 ` David Dillow
2009-09-01 9:20 ` Francois Romieu
2009-08-25 21:37 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts Eric W. Biederman
2009-08-25 21:54 ` David Dillow
2009-08-25 23:11 ` Francois Romieu
2009-05-12 11:10 ` 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Krzysztof Halasa
2009-05-12 21:45 ` Michael Riepe
2009-05-13 6:11 ` Francois Romieu
2009-05-13 6:27 ` Michael Riepe
2009-05-13 19:34 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A8F1011.7040508@googlemail.com \
--to=michael.riepe@googlemail.com \
--cc=dave@thedillows.org \
--cc=ebiederm@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.bueker@berlin.de \
--cc=mb@bu3sch.de \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=rsantos@grupopie.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.