* Issues with Empire Dual Pen: request for help and suggestions!!!
@ 2009-08-05 20:33 xwang1976
2009-08-06 13:54 ` xwang1976
2009-08-10 22:27 ` New device: Dikom DK-300 (maybe Kworld 323U rebranded) xwang1976
0 siblings, 2 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-05 20:33 UTC (permalink / raw)
To: linux-media
Hi to all,
I've an Empire Dual Pen usb device.
Up to now I've used Markus driver, but now I've tried to switch to the
v4l-dvb driver.
However I've the following issues:
1) the card is not recognized automatically so I've to modprobe the
em28xx module with the parameter card=66
2) when scanning for analog tv channels with tvtime-scanner, the system
hangs and since the alt+Sys+REISUB procedure does not help, I have to
turn off the pc (very, very, very bad)
3) digital tv channels are not tuned by kaffeine (SNR value is always zero).
So the device is not usable.
Can it be fixed or is it better to buy an already supported device?
Inthe second case which device can you suggest me? Is this device:
http://www.terratec.net/en/products/technical-data/produkte_technische_daten_en_87128.html
supported by the latest v4l drivers.
Thank you for your help,
Xwang
PS: I live in Italy and I use kubuntu 9.04 amd64
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-05 20:33 Issues with Empire Dual Pen: request for help and suggestions!!! xwang1976
@ 2009-08-06 13:54 ` xwang1976
2009-08-06 14:17 ` Devin Heitmueller
2009-08-10 22:27 ` New device: Dikom DK-300 (maybe Kworld 323U rebranded) xwang1976
1 sibling, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-06 13:54 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 1460 bytes --]
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the
first point (automatic recognition of the device when plugged in) ha
been resolved (using his development tree driver).
I've tried to scan for digital channels again and the result has not
changed but in the dmesg attached there are a lot of messages created
during the scan process. I hope they are useful to solve at list the
issue related with the digital scanning.
Thank you,
Xwang
xwang1976@email.it ha scritto:
>
> Hi to all,
> I've an Empire Dual Pen usb device.
> Up to now I've used Markus driver, but now I've tried to switch to the
> v4l-dvb driver.
> However I've the following issues:
> 1) the card is not recognized automatically so I've to modprobe the
> em28xx module with the parameter card=66
> 2) when scanning for analog tv channels with tvtime-scanner, the
> system hangs and since the alt+Sys+REISUB procedure does not help, I
> have to turn off the pc (very, very, very bad)
> 3) digital tv channels are not tuned by kaffeine (SNR value is always
> zero).
> So the device is not usable.
> Can it be fixed or is it better to buy an already supported device?
> Inthe second case which device can you suggest me? Is this device:
> http://www.terratec.net/en/products/technical-data/produkte_technische_daten_en_87128.html
>
> supported by the latest v4l drivers.
> Thank you for your help,
> Xwang
>
> PS: I live in Italy and I use kubuntu 9.04 amd64
>
[-- Attachment #2: dmesg_out.txt --]
[-- Type: text/plain, Size: 170590 bytes --]
andreak@pro5av:~$ dmesg
[ 1142.664103] usb 2-3: new high speed USB device using ehci_hcd and address 6
[ 1142.800169] usb 2-3: configuration #1 chosen from 1 choice
[ 1142.839851] Linux video capture interface: v2.00
[ 1142.875566] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0)
[ 1142.875576] em28xx #0: Identified as MSI DigiVox A/D (card=49)
[ 1142.879192] em28xx #0: chip ID is em2882/em2883
[ 1143.034939] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00
[ 1143.034961] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00
[ 1143.034981] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 1143.034999] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 1143.035018] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035037] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035055] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 1143.035074] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00
[ 1143.035092] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 1143.035111] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035129] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035147] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035166] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035184] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035202] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035220] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1143.035242] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441
[ 1143.035246] em28xx #0: EEPROM info:
[ 1143.035248] em28xx #0: AC97 audio (5 sample rates)
[ 1143.035252] em28xx #0: 500mA max power
[ 1143.035256] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 1143.035262] em28xx #0: Your board has no unique USB ID.
[ 1143.035268] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 1143.035272] em28xx #0: This method is not 100% failproof.
[ 1143.035276] em28xx #0: If the board were missdetected, please email this log to:
[ 1143.035280] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 1143.035284] em28xx #0: Board detected as Empire dual TV
[ 1143.112863] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0)
[ 1143.120239] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[ 1143.134348] xc2028 6-0061: creating new instance
[ 1143.134354] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[ 1143.134368] usb 2-3: firmware: requesting xc3028-v27.fw
[ 1143.145494] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 1143.205066] xc2028 6-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 1144.153950] xc2028 6-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 1144.169462] xc2028 6-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 1144.352314] em28xx #0: Config register raw data: 0xd0
[ 1144.353076] em28xx #0: AC97 vendor ID = 0xffffffff
[ 1144.353431] em28xx #0: AC97 features = 0x6a90
[ 1144.353435] em28xx #0: Empia 202 AC97 audio processor detected
[ 1144.476568] tvp5150 6-005c: tvp5150am1 detected.
[ 1144.572941] em28xx #0: v4l2 driver version 0.1.2
[ 1144.655055] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 1144.668085] em28xx video device (eb1a:e310): interface 1, class 255 found.
[ 1144.668091] em28xx This is an anciliary interface not used by the driver
[ 1144.668132] usbcore: registered new interface driver em28xx
[ 1144.668139] em28xx driver loaded
[ 1144.712837] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 1144.712842] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1144.713462] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 1144.833828] xc2028 6-0061: attaching existing instance
[ 1144.833830] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[ 1144.833832] em28xx #0/2: xc3028 attached
[ 1144.833834] DVB: registering new adapter (em28xx #0)
[ 1144.833836] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 1144.834100] Successfully loaded em28xx-dvb
[ 1144.834102] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 1144.940531] tvp5150 6-005c: tvp5150am1 detected.
[ 1165.852073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1166.801941] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1166.815446] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1166.849947] xc2028 6-0061: Incorrect readback of firmware version.
[ 1166.964093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1167.910948] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1167.924445] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1167.957945] xc2028 6-0061: Incorrect readback of firmware version.
[ 1169.160071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1170.106946] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1170.120320] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1170.153823] xc2028 6-0061: Incorrect readback of firmware version.
[ 1170.268088] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1171.217827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1171.231223] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1171.261821] xc2028 6-0061: Incorrect readback of firmware version.
[ 1172.400072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1173.357823] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1173.371448] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1173.405948] xc2028 6-0061: Incorrect readback of firmware version.
[ 1173.520093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1174.481951] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1174.495446] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1174.529945] xc2028 6-0061: Incorrect readback of firmware version.
[ 1175.737071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1176.697954] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1176.711442] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1176.745820] xc2028 6-0061: Incorrect readback of firmware version.
[ 1176.860069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1177.810953] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1177.824573] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1177.857946] xc2028 6-0061: Incorrect readback of firmware version.
[ 1179.001068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1179.950822] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1179.964574] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1179.997819] xc2028 6-0061: Incorrect readback of firmware version.
[ 1180.112090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1181.077951] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1181.091466] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1181.125810] xc2028 6-0061: Incorrect readback of firmware version.
[ 1182.328066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1183.273827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1183.287324] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1183.317818] xc2028 6-0061: Incorrect readback of firmware version.
[ 1183.433066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1184.377830] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1184.391351] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1184.426615] xc2028 6-0061: Incorrect readback of firmware version.
[ 1185.564067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1186.517955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1186.530977] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1186.561812] xc2028 6-0061: Incorrect readback of firmware version.
[ 1186.676063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1187.629950] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1187.643470] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1187.677947] xc2028 6-0061: Incorrect readback of firmware version.
[ 1188.880096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1189.821828] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1189.835450] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1189.869948] xc2028 6-0061: Incorrect readback of firmware version.
[ 1189.992069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1190.941832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1190.955319] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1190.985850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1192.124070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1193.066956] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1193.080453] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1193.113950] xc2028 6-0061: Incorrect readback of firmware version.
[ 1193.232099] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1194.173832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1194.187353] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1194.219991] xc2028 6-0061: Incorrect readback of firmware version.
[ 1195.424097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1196.369955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1196.383322] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1196.424838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1196.540072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1197.506827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1197.520452] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1197.553949] xc2028 6-0061: Incorrect readback of firmware version.
[ 1198.696070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1199.645956] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1199.659314] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1199.689852] xc2028 6-0061: Incorrect readback of firmware version.
[ 1199.804068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1200.753832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1200.767104] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1200.797825] xc2028 6-0061: Incorrect readback of firmware version.
[ 1202.000077] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1202.969833] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1202.983322] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1203.013821] xc2028 6-0061: Incorrect readback of firmware version.
[ 1203.128070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1204.069957] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1204.083447] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1204.117825] xc2028 6-0061: Incorrect readback of firmware version.
[ 1205.257068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1206.201957] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1206.215449] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1206.249825] xc2028 6-0061: Incorrect readback of firmware version.
[ 1206.364071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1207.325831] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1207.339356] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1207.369950] xc2028 6-0061: Incorrect readback of firmware version.
[ 1208.576106] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1209.521829] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1209.535218] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1209.565951] xc2028 6-0061: Incorrect readback of firmware version.
[ 1209.680071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1210.633955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1210.647572] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1210.681825] xc2028 6-0061: Incorrect readback of firmware version.
[ 1211.820072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1212.773958] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1212.787482] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1212.821950] xc2028 6-0061: Incorrect readback of firmware version.
[ 1212.936091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1213.905960] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1213.919449] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1213.949950] xc2028 6-0061: Incorrect readback of firmware version.
[ 1215.152072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1216.110834] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1216.124198] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1216.157822] xc2028 6-0061: Incorrect readback of firmware version.
[ 1216.272089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1217.221101] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[ 1217.238324] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000.
[ 1217.269827] xc2028 6-0061: Incorrect readback of firmware version.
[ 1218.408071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1219.353954] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1219.367594] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1219.402328] xc2028 6-0061: Incorrect readback of firmware version.
[ 1219.516068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1220.469691] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1220.482560] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1220.513827] xc2028 6-0061: Incorrect readback of firmware version.
[ 1221.717071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1222.665958] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1222.679356] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1222.709829] xc2028 6-0061: Incorrect readback of firmware version.
[ 1222.825069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1223.769835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1223.783193] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1223.813828] xc2028 6-0061: Incorrect readback of firmware version.
[ 1224.956268] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1225.897835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1225.911204] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1225.941824] xc2028 6-0061: Incorrect readback of firmware version.
[ 1226.061063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1227.010962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1227.024581] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1227.057828] xc2028 6-0061: Incorrect readback of firmware version.
[ 1228.261067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1229.209836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1229.223410] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1229.254828] xc2028 6-0061: Incorrect readback of firmware version.
[ 1229.368093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1230.313830] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1230.327453] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1230.361825] xc2028 6-0061: Incorrect readback of firmware version.
[ 1231.500096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1232.462705] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1232.476233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1232.509829] xc2028 6-0061: Incorrect readback of firmware version.
[ 1232.624066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1233.569836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1233.582983] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1233.613830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1234.816086] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1235.753831] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1235.767349] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1235.797830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1235.912070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1236.862836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1236.876235] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1236.909827] xc2028 6-0061: Incorrect readback of firmware version.
[ 1238.048090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1238.997837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1239.011236] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1239.041828] xc2028 6-0061: Incorrect readback of firmware version.
[ 1239.156070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1240.113837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1240.127360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1240.157829] xc2028 6-0061: Incorrect readback of firmware version.
[ 1241.364073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1242.334213] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1242.347737] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1242.381821] xc2028 6-0061: Incorrect readback of firmware version.
[ 1242.496081] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1243.449958] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1243.463456] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1243.497956] xc2028 6-0061: Incorrect readback of firmware version.
[ 1244.636074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1245.603105] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1245.616457] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1245.650826] xc2028 6-0061: Incorrect readback of firmware version.
[ 1245.764073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1246.754838] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1246.768329] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1246.801830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1248.004067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1248.975840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1248.989077] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1249.021831] xc2028 6-0061: Incorrect readback of firmware version.
[ 1249.137074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1250.089715] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1250.103231] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1250.137851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1251.280095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1252.229805] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1252.243195] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1252.273826] xc2028 6-0061: Incorrect readback of firmware version.
[ 1252.388068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1253.357840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1253.371204] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1253.401862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1254.604067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1255.573698] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1255.595070] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1255.625831] xc2028 6-0061: Incorrect readback of firmware version.
[ 1255.740094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1256.689836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1256.703334] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1256.734953] xc2028 6-0061: Incorrect readback of firmware version.
[ 1257.876070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1258.821962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1258.835486] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1258.869829] xc2028 6-0061: Incorrect readback of firmware version.
[ 1258.984089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1259.917957] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1259.931603] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1259.961850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1261.164097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1262.109966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1262.123453] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1262.157832] xc2028 6-0061: Incorrect readback of firmware version.
[ 1262.273066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1263.217837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1263.231459] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1263.265957] xc2028 6-0061: Incorrect readback of firmware version.
[ 1264.404093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1265.353841] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1265.367205] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1265.397830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1265.512072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1266.473959] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1266.487483] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1266.521835] xc2028 6-0061: Incorrect readback of firmware version.
[ 1267.724094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1268.682840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1268.696071] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1268.730822] xc2028 6-0061: Incorrect readback of firmware version.
[ 1268.844067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1269.801960] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1269.815455] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1269.849830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1270.993125] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1271.933836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1271.947350] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1271.977827] xc2028 6-0061: Incorrect readback of firmware version.
[ 1272.092116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1273.037961] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1273.051609] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1273.085835] xc2028 6-0061: Incorrect readback of firmware version.
[ 1274.288072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1275.242839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1275.256068] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1275.289834] xc2028 6-0061: Incorrect readback of firmware version.
[ 1275.404030] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1276.353966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1276.367330] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1276.397833] xc2028 6-0061: Incorrect readback of firmware version.
[ 1277.536106] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1278.493718] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1278.507205] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1278.537836] xc2028 6-0061: Incorrect readback of firmware version.
[ 1278.652093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1279.605959] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1279.619479] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1279.653831] xc2028 6-0061: Incorrect readback of firmware version.
[ 1280.856095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1281.813831] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1281.827212] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1281.857831] xc2028 6-0061: Incorrect readback of firmware version.
[ 1281.972067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1282.913835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1282.927210] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1282.957835] xc2028 6-0061: Incorrect readback of firmware version.
[ 1284.096083] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1285.041987] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1285.055587] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1285.089834] xc2028 6-0061: Incorrect readback of firmware version.
[ 1285.204070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1286.149837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1286.163364] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1286.193830] xc2028 6-0061: Incorrect readback of firmware version.
[ 1287.396075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1288.341842] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1288.355333] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1288.386822] xc2028 6-0061: Incorrect readback of firmware version.
[ 1288.501069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1289.445840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1289.459587] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1289.493836] xc2028 6-0061: Incorrect readback of firmware version.
[ 1290.632071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1291.585962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1291.599585] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1291.633834] xc2028 6-0061: Incorrect readback of firmware version.
[ 1291.748061] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1292.705843] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1292.719116] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1292.749836] xc2028 6-0061: Incorrect readback of firmware version.
[ 1293.952067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1294.897963] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1294.911605] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1294.945837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1295.060089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1296.009838] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1296.023084] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1296.053838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1297.192082] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1298.133844] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1298.147369] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1298.177838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1298.292091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1299.238986] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1299.252463] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1299.285837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1300.488096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1301.437715] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1301.451215] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1301.481855] xc2028 6-0061: Incorrect readback of firmware version.
[ 1301.596093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1302.557965] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1302.571481] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1302.605837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1303.745071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1304.697839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1304.711233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1304.742839] xc2028 6-0061: Incorrect readback of firmware version.
[ 1304.856094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1305.801963] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1305.815459] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1305.849833] xc2028 6-0061: Incorrect readback of firmware version.
[ 1307.052071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1307.993841] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1308.007339] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1308.037838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1308.153066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1309.117722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1309.131086] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1309.161838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1310.300071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1311.249972] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1311.263454] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1311.297834] xc2028 6-0061: Incorrect readback of firmware version.
[ 1311.412063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1312.361968] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1312.375461] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1312.409837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1313.613119] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1314.566720] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1314.579994] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1314.613838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1314.729082] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1315.669843] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1315.683084] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1315.713838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1316.856060] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1317.797966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1317.811614] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1317.841836] xc2028 6-0061: Incorrect readback of firmware version.
[ 1317.956070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1318.910702] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1318.923851] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1318.957821] xc2028 6-0061: Incorrect readback of firmware version.
[ 1320.160071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1321.102722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1321.116066] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1321.149839] xc2028 6-0061: Incorrect readback of firmware version.
[ 1321.264072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1322.193846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1322.207337] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1322.238836] xc2028 6-0061: Incorrect readback of firmware version.
[ 1323.380066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1324.326848] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1324.340246] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1324.373837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1324.488074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1325.437974] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1325.451337] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1325.481841] xc2028 6-0061: Incorrect readback of firmware version.
[ 1326.684073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1327.637971] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1327.651608] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1327.685841] xc2028 6-0061: Incorrect readback of firmware version.
[ 1327.800116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1328.725846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1328.739087] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1328.769841] xc2028 6-0061: Incorrect readback of firmware version.
[ 1329.909073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1330.862847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1330.876246] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1330.909839] xc2028 6-0061: Incorrect readback of firmware version.
[ 1331.024093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1331.961968] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1331.975461] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1332.009839] xc2028 6-0061: Incorrect readback of firmware version.
[ 1333.208072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1334.161599] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1334.175087] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1334.205966] xc2028 6-0061: Incorrect readback of firmware version.
[ 1334.320116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1335.270870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1335.284468] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1335.317837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1336.472064] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1337.417974] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1337.431463] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1337.465838] xc2028 6-0061: Incorrect readback of firmware version.
[ 1337.580068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1338.542845] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1338.556718] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1338.589844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1339.792097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1340.742722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1340.756218] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1340.789842] xc2028 6-0061: Incorrect readback of firmware version.
[ 1340.904090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1341.845969] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1341.859486] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1341.893844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1343.032094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1343.982848] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1343.996373] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1344.029968] xc2028 6-0061: Incorrect readback of firmware version.
[ 1344.144072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1345.093846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1345.107360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1345.137845] xc2028 6-0061: Incorrect readback of firmware version.
[ 1346.340093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1347.293709] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1347.306719] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1347.337843] xc2028 6-0061: Incorrect readback of firmware version.
[ 1347.452070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1348.393721] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1348.407109] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1348.437975] xc2028 6-0061: Incorrect readback of firmware version.
[ 1349.580096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1350.533723] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1350.547216] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1350.577873] xc2028 6-0061: Incorrect readback of firmware version.
[ 1350.692066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1351.637850] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1351.651466] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1351.694833] xc2028 6-0061: Incorrect readback of firmware version.
[ 1352.896085] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1353.841721] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1353.855094] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1353.885970] xc2028 6-0061: Incorrect readback of firmware version.
[ 1354.000067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1354.942851] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1354.956376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1354.989844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1356.128070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1357.081722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1357.095238] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1357.125844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1357.245070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1358.197716] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1358.211492] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1358.245841] xc2028 6-0061: Incorrect readback of firmware version.
[ 1359.448072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1360.393852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1360.407249] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1360.438837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1360.552086] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1361.501976] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1361.515467] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1361.549841] xc2028 6-0061: Incorrect readback of firmware version.
[ 1362.692095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1363.637849] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1363.651217] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1363.681846] xc2028 6-0061: Incorrect readback of firmware version.
[ 1363.796069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1364.741724] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1364.755222] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1364.785844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1365.988096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1366.942839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1366.955707] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1366.989831] xc2028 6-0061: Incorrect readback of firmware version.
[ 1367.104094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1368.049852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1368.063342] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1368.093876] xc2028 6-0061: Incorrect readback of firmware version.
[ 1369.248037] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1370.190853] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1370.204376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1370.238837] xc2028 6-0061: Incorrect readback of firmware version.
[ 1370.353150] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1371.293726] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1371.306711] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1371.337826] xc2028 6-0061: Incorrect readback of firmware version.
[ 1372.540073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1373.478853] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1373.492252] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1373.525844] xc2028 6-0061: Incorrect readback of firmware version.
[ 1373.640092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1374.597725] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1374.611121] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1374.641847] xc2028 6-0061: Incorrect readback of firmware version.
[ 1375.788096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1376.745849] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1376.759348] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1376.789845] xc2028 6-0061: Incorrect readback of firmware version.
[ 1376.904063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1377.841723] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1377.855116] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1377.885847] xc2028 6-0061: Incorrect readback of firmware version.
[ 1379.088094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1380.023098] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1380.036627] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1380.069847] xc2028 6-0061: Incorrect readback of firmware version.
[ 1380.185112] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1381.133979] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1381.147349] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1381.177846] xc2028 6-0061: Incorrect readback of firmware version.
[ 1382.316072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1383.261728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1383.275123] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1383.305974] xc2028 6-0061: Incorrect readback of firmware version.
[ 1383.420093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1384.365847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1384.379474] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1384.418080] xc2028 6-0061: Incorrect readback of firmware version.
[ 1385.620092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1386.569731] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1386.583218] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1386.617849] xc2028 6-0061: Incorrect readback of firmware version.
[ 1386.732089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1387.685856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1387.699096] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1387.730845] xc2028 6-0061: Incorrect readback of firmware version.
[ 1388.868069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1389.818854] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1389.832106] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1389.865847] xc2028 6-0061: Incorrect readback of firmware version.
[ 1389.980069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1390.926852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1390.940229] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1390.973848] xc2028 6-0061: Incorrect readback of firmware version.
[ 1392.176122] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1393.121855] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1393.135254] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1393.165840] xc2028 6-0061: Incorrect readback of firmware version.
[ 1393.280074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1394.221855] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1394.235366] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1394.265850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1395.404098] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1396.349852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1396.363476] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1396.397845] xc2028 6-0061: Incorrect readback of firmware version.
[ 1396.516095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1397.465728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1397.479100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1397.509848] xc2028 6-0061: Incorrect readback of firmware version.
[ 1398.712095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1399.665727] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1399.679100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1399.709850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1399.824092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1400.773727] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1400.787477] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1400.821976] xc2028 6-0061: Incorrect readback of firmware version.
[ 1401.968072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1402.914729] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1402.928351] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1402.961851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1403.077112] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1404.009728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1404.023478] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1404.057852] xc2028 6-0061: Incorrect readback of firmware version.
[ 1405.260075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1406.211106] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1406.224746] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1406.257846] xc2028 6-0061: Incorrect readback of firmware version.
[ 1406.372095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1407.329733] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1407.343257] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1407.373850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1408.516121] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1409.461979] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1409.475498] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1409.509848] xc2028 6-0061: Incorrect readback of firmware version.
[ 1409.624088] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1410.573730] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1410.587354] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1410.617849] xc2028 6-0061: Incorrect readback of firmware version.
[ 1411.820070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1412.761982] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1412.775601] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1412.809851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1412.925067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1413.865856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1413.879603] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1413.913850] xc2028 6-0061: Incorrect readback of firmware version.
[ 1415.056084] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1416.005856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1416.019599] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1416.053852] xc2028 6-0061: Incorrect readback of firmware version.
[ 1416.168095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1417.113860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1417.127100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1417.157972] xc2028 6-0061: Incorrect readback of firmware version.
[ 1418.360065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1419.313860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1419.327256] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1419.357847] xc2028 6-0061: Incorrect readback of firmware version.
[ 1419.472073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1420.424847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1420.440224] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1420.473851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1421.612093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1422.549717] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1422.562757] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1422.593854] xc2028 6-0061: Incorrect readback of firmware version.
[ 1422.708069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1423.653984] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1423.667509] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1423.701851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1424.904092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1425.845981] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1425.859628] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1425.893854] xc2028 6-0061: Incorrect readback of firmware version.
[ 1426.008093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1426.945860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1426.959100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1426.989978] xc2028 6-0061: Incorrect readback of firmware version.
[ 1428.129069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1429.069861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1429.083225] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1429.113882] xc2028 6-0061: Incorrect readback of firmware version.
[ 1429.228071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1430.173732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1430.187498] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1430.217848] xc2028 6-0061: Incorrect readback of firmware version.
[ 1431.421042] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1432.369859] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1432.383226] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1432.414842] xc2028 6-0061: Incorrect readback of firmware version.
[ 1432.528074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1433.477861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1433.491355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1433.525884] xc2028 6-0061: Incorrect readback of firmware version.
[ 1434.668068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1435.614722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1435.638252] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1435.670853] xc2028 6-0061: Incorrect readback of firmware version.
[ 1435.785067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1436.741857] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1436.755357] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1436.785853] xc2028 6-0061: Incorrect readback of firmware version.
[ 1437.988098] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1438.918861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1438.932228] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1438.966854] xc2028 6-0061: Incorrect readback of firmware version.
[ 1439.080063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1440.025732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1440.039119] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1440.069852] xc2028 6-0061: Incorrect readback of firmware version.
[ 1441.208076] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1442.146861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1442.160388] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1442.193856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1442.308071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1443.257863] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1443.271354] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1443.301856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1444.505078] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1445.457864] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1445.471479] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1445.505855] xc2028 6-0061: Incorrect readback of firmware version.
[ 1445.621114] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1446.577864] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1446.592360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1446.625855] xc2028 6-0061: Incorrect readback of firmware version.
[ 1447.764074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1448.709738] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1448.722982] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1448.753858] xc2028 6-0061: Incorrect readback of firmware version.
[ 1448.868070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1449.810739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1449.824383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1449.857856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1451.060093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1451.997738] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1452.011104] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1452.041856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1452.156067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1453.105862] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1453.119262] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1453.149858] xc2028 6-0061: Incorrect readback of firmware version.
[ 1454.296120] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1455.249734] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1455.263250] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1455.293859] xc2028 6-0061: Incorrect readback of firmware version.
[ 1455.409066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1456.362732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1456.376484] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1456.409853] xc2028 6-0061: Incorrect readback of firmware version.
[ 1457.613070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1458.573734] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1458.587258] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1458.617860] xc2028 6-0061: Incorrect readback of firmware version.
[ 1458.733065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1459.673737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1459.687359] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1459.717856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1460.860075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1461.805867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1461.819355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1461.853853] xc2028 6-0061: Incorrect readback of firmware version.
[ 1461.968091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1462.921737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1462.935361] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1462.965858] xc2028 6-0061: Incorrect readback of firmware version.
[ 1464.168095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1465.113737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1465.127264] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1465.157854] xc2028 6-0061: Incorrect readback of firmware version.
[ 1465.276095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1466.222986] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1466.236228] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1466.269861] xc2028 6-0061: Incorrect readback of firmware version.
[ 1467.408072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1468.357736] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1468.371383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1468.402845] xc2028 6-0061: Incorrect readback of firmware version.
[ 1468.516095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1469.462867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1469.476392] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1469.509859] xc2028 6-0061: Incorrect readback of firmware version.
[ 1470.712097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1471.661985] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1471.675633] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1471.709856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1471.824071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1472.781735] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1472.795376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1472.825858] xc2028 6-0061: Incorrect readback of firmware version.
[ 1473.964092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1474.930857] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1474.944506] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1474.977862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1475.092072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1476.021737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1476.035362] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1476.065856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1477.268071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1478.213739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1478.227130] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1478.257859] xc2028 6-0061: Incorrect readback of firmware version.
[ 1478.372095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1479.321737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1479.335378] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1479.365860] xc2028 6-0061: Incorrect readback of firmware version.
[ 1480.505071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1481.449867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1481.463357] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1481.497856] xc2028 6-0061: Incorrect readback of firmware version.
[ 1481.612066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1482.565863] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1482.579612] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1482.613861] xc2028 6-0061: Incorrect readback of firmware version.
[ 1483.816190] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1484.769743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1484.782983] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1484.813851] xc2028 6-0061: Incorrect readback of firmware version.
[ 1484.928111] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1485.885743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1485.899234] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1485.929857] xc2028 6-0061: Incorrect readback of firmware version.
[ 1487.068093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1488.013869] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1488.027358] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1488.061855] xc2028 6-0061: Incorrect readback of firmware version.
[ 1488.176102] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1489.122861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1489.136255] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1489.169859] xc2028 6-0061: Incorrect readback of firmware version.
[ 1490.372092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1491.318737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1491.332642] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1491.365864] xc2028 6-0061: Incorrect readback of firmware version.
[ 1491.489056] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1492.434769] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1492.449979] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1492.481862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1493.628066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1494.585870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1494.599389] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1494.629862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1494.744092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1495.689868] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1495.703233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1495.733853] xc2028 6-0061: Incorrect readback of firmware version.
[ 1496.940117] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1497.886870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1497.900394] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1497.933983] xc2028 6-0061: Incorrect readback of firmware version.
[ 1498.048066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1498.986024] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1498.999141] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1499.029863] xc2028 6-0061: Incorrect readback of firmware version.
[ 1500.168093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1501.113871] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1501.127268] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1501.157862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1501.272074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1502.202870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1502.218731] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1502.249864] xc2028 6-0061: Incorrect readback of firmware version.
[ 1503.452073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1504.393739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1504.407239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1504.441861] xc2028 6-0061: Incorrect readback of firmware version.
[ 1504.556073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1505.497746] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1505.511355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1505.545864] xc2028 6-0061: Incorrect readback of firmware version.
[ 1506.684065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1507.617743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1507.631365] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1507.661865] xc2028 6-0061: Incorrect readback of firmware version.
[ 1507.776104] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1508.729735] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1508.742989] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1508.773862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1509.976102] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1510.937741] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1510.951265] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1510.981861] xc2028 6-0061: Incorrect readback of firmware version.
[ 1511.096087] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1512.038868] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1512.052516] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1512.085863] xc2028 6-0061: Incorrect readback of firmware version.
[ 1513.232074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1514.173874] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1514.187360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1514.221862] xc2028 6-0061: Incorrect readback of firmware version.
[ 1514.336077] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1515.297743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1515.311263] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1515.341865] xc2028 6-0061: Incorrect readback of firmware version.
[ 1516.544097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1517.489994] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1517.503641] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1517.537861] xc2028 6-0061: Incorrect readback of firmware version.
[ 1517.652063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1518.617991] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1518.631641] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1518.665865] xc2028 6-0061: Incorrect readback of firmware version.
[ 1519.809058] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1520.757873] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1520.771397] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1520.802866] xc2028 6-0061: Incorrect readback of firmware version.
[ 1520.917064] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1521.861745] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1521.875492] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1521.909863] xc2028 6-0061: Incorrect readback of firmware version.
[ 1523.112075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1524.054748] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1524.068270] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1524.101868] xc2028 6-0061: Incorrect readback of firmware version.
[ 1524.217074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1525.153744] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1525.167383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1525.197866] xc2028 6-0061: Incorrect readback of firmware version.
[ 1526.340109] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1527.293747] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1527.307239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1527.337866] xc2028 6-0061: Incorrect readback of firmware version.
[ 1527.452070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1528.401870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1528.416411] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1528.450863] xc2028 6-0061: Incorrect readback of firmware version.
[ 1529.652075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1530.590870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1530.604368] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1530.637865] xc2028 6-0061: Incorrect readback of firmware version.
[ 1530.752072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1531.702872] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1531.716510] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1531.749866] xc2028 6-0061: Incorrect readback of firmware version.
[ 1532.888074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1533.829869] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1533.843138] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1533.873868] xc2028 6-0061: Incorrect readback of firmware version.
[ 1533.988093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1534.937750] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1534.951239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1534.981863] xc2028 6-0061: Incorrect readback of firmware version.
[ 1536.184092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1537.130875] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1537.144525] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1537.177868] xc2028 6-0061: Incorrect readback of firmware version.
[ 1537.292073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 1538.242744] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1538.256242] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[ 1538.289867] xc2028 6-0061: Incorrect readback of firmware version.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-06 13:54 ` xwang1976
@ 2009-08-06 14:17 ` Devin Heitmueller
[not found] ` <20090806112317.21240b9c@gmail.com>
0 siblings, 1 reply; 21+ messages in thread
From: Devin Heitmueller @ 2009-08-06 14:17 UTC (permalink / raw)
To: xwang1976; +Cc: linux-media
On Thu, Aug 6, 2009 at 9:54 AM, <xwang1976@email.it> wrote:
> Hi,
> I want to inform you that thanks to Douglas Schilling Landgraf, the first
> point (automatic recognition of the device when plugged in) ha been resolved
> (using his development tree driver).
> I've tried to scan for digital channels again and the result has not changed
> but in the dmesg attached there are a lot of messages created during the
> scan process. I hope they are useful to solve at list the issue related with
> the digital scanning.
> Thank you,
> Xwang
<snip>
Yeah, I've seen that before. Open up em28xx-dvb.c, and move the following:
case EM2880_BOARD_EMPIRE_DUAL_TV:
from line 402 to line 492. So it should look like this:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
dev->i2c_adap);
Then unplug the device, recompile, reinstall and see if the dvb starts working.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
[not found] ` <20090806112317.21240b9c@gmail.com>
@ 2009-08-06 15:16 ` xwang1976
2009-08-06 15:21 ` Devin Heitmueller
0 siblings, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-06 15:16 UTC (permalink / raw)
To: Douglas Schilling Landgraf, linux-media
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic.
Is there something I can do before testing so that to be sure that at
least all the file system are in a safety condition even if a kernel
panic happens.
I'm wondering if it is the case, for example, to umount them and remount
in read only mode so that if I have to turn off the pc, nothing can be
corrupted (is it so?).
What do you suggest?
In case, how can I temporarly umount and remout the file systems in read
only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such
commands while I'm in KDE?
Thank you,
Xwang
Douglas Schilling Landgraf ha scritto:
> Hello Xwang,
>
> Could you please try the bellow suggestion?
> If you want I can make this change in my development tree and you can
> test from there.
>
> Let me know the results
>
> Cheers,
> Douglas
>
> On Thu, 6 Aug 2009 10:17:28 -0400
> Devin Heitmueller <dheitmueller@kernellabs.com> wrote:
>
>
>> On Thu, Aug 6, 2009 at 9:54 AM, <xwang1976@email.it> wrote:
>>
>>> Hi,
>>> I want to inform you that thanks to Douglas Schilling Landgraf, the
>>> first point (automatic recognition of the device when plugged in)
>>> ha been resolved (using his development tree driver).
>>> I've tried to scan for digital channels again and the result has
>>> not changed but in the dmesg attached there are a lot of messages
>>> created during the scan process. I hope they are useful to solve at
>>> list the issue related with the digital scanning.
>>> Thank you,
>>> Xwang
>>>
>> <snip>
>>
>> Yeah, I've seen that before. Open up em28xx-dvb.c, and move the
>> following:
>>
>> case EM2880_BOARD_EMPIRE_DUAL_TV:
>>
>> from line 402 to line 492. So it should look like this:
>>
>> case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
>> case EM2880_BOARD_EMPIRE_DUAL_TV:
>> dvb->frontend = dvb_attach(zl10353_attach,
>>
>> &em28xx_zl10353_xc3028_no_i2c_gate,
>> dev->i2c_adap);
>>
>> Then unplug the device, recompile, reinstall and see if the dvb
>> starts working.
>>
>> Devin
>>
>>
>
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-06 15:16 ` xwang1976
@ 2009-08-06 15:21 ` Devin Heitmueller
2009-08-06 16:22 ` xwang1976
0 siblings, 1 reply; 21+ messages in thread
From: Devin Heitmueller @ 2009-08-06 15:21 UTC (permalink / raw)
To: xwang1976; +Cc: Douglas Schilling Landgraf, linux-media
On Thu, Aug 6, 2009 at 11:16 AM, <xwang1976@email.it> wrote:
> Ok,
> I've made the change and now the digital tv works perfectly.
> So now I should test the analog tv, but I fear to have another kernel panic.
> Is there something I can do before testing so that to be sure that at least
> all the file system are in a safety condition even if a kernel panic
> happens.
> I'm wondering if it is the case, for example, to umount them and remount in
> read only mode so that if I have to turn off the pc, nothing can be
> corrupted (is it so?).
> What do you suggest?
> In case, how can I temporarly umount and remout the file systems in read
> only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such
> commands while I'm in KDE?
> Thank you,
> Xwang
Glad to hear it's working now. I will add the patch and issue a PULL
request to get it into the mainline (I had to do this already for
several other boards).
Regarding your concerns on panic, as long as you have a modern
filesystem like ext3, and you don't have alot of applications running
which are doing writes, a panic is a pretty safe event. I panic my
machine many times a week and never have any problems.
Cheers,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-06 15:21 ` Devin Heitmueller
@ 2009-08-06 16:22 ` xwang1976
2009-08-07 11:10 ` xwang1976
` (2 more replies)
0 siblings, 3 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-06 16:22 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Douglas Schilling Landgraf, linux-media
[-- Attachment #1: Type: text/plain, Size: 1726 bytes --]
Ok,
I've tried to tune analog tv with tvtime-scanner and all the channels
have been tuned corretly.
However, even if I use the following command to redirect the audio from
the device to the audio card:
sox -r 48000 -t alsa hw:1,0 -t alsa default &
no audio is present when I start tv time and sox exits with the output
as in the attached file.
If it is possible to fix this, this device can be added to the fully
supported ones.
Xwang
Devin Heitmueller ha scritto:
> On Thu, Aug 6, 2009 at 11:16 AM, <xwang1976@email.it> wrote:
>
>> Ok,
>> I've made the change and now the digital tv works perfectly.
>> So now I should test the analog tv, but I fear to have another kernel panic.
>> Is there something I can do before testing so that to be sure that at least
>> all the file system are in a safety condition even if a kernel panic
>> happens.
>> I'm wondering if it is the case, for example, to umount them and remount in
>> read only mode so that if I have to turn off the pc, nothing can be
>> corrupted (is it so?).
>> What do you suggest?
>> In case, how can I temporarly umount and remout the file systems in read
>> only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such
>> commands while I'm in KDE?
>> Thank you,
>> Xwang
>>
>
> Glad to hear it's working now. I will add the patch and issue a PULL
> request to get it into the mainline (I had to do this already for
> several other boards).
>
> Regarding your concerns on panic, as long as you have a modern
> filesystem like ext3, and you don't have alot of applications running
> which are doing writes, a panic is a pretty safe event. I panic my
> machine many times a week and never have any problems.
>
> Cheers,
>
> Devin
>
>
[-- Attachment #2: sox_output.jpg --]
[-- Type: image/jpeg, Size: 3597 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-06 16:22 ` xwang1976
@ 2009-08-07 11:10 ` xwang1976
[not found] ` <4A7C00DA.1030805@email.it>
2009-08-11 20:24 ` xwang1976
2 siblings, 0 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-07 11:10 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Douglas Schilling Landgraf, linux-media
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus'
drivers when he added the em28xx-audioep driver because, if I have
correctly understood, my device has a noy standard audio.
Is it possible to import the necessary code in the main branch so that
to have the device fully functional (today it is unusable to see analog
tv because no audio is present).
Thank you to all,
Xwang
xwang1976@email.it ha scritto:
> Ok,
> I've tried to tune analog tv with tvtime-scanner and all the channels
> have been tuned corretly.
> However, even if I use the following command to redirect the audio
> from the device to the audio card:
> sox -r 48000 -t alsa hw:1,0 -t alsa default &
> no audio is present when I start tv time and sox exits with the output
> as in the attached file.
> If it is possible to fix this, this device can be added to the fully
> supported ones.
> Xwang
>
> Devin Heitmueller ha scritto:
>> On Thu, Aug 6, 2009 at 11:16 AM, <xwang1976@email.it> wrote:
>>
>>> Ok,
>>> I've made the change and now the digital tv works perfectly.
>>> So now I should test the analog tv, but I fear to have another
>>> kernel panic.
>>> Is there something I can do before testing so that to be sure that
>>> at least
>>> all the file system are in a safety condition even if a kernel panic
>>> happens.
>>> I'm wondering if it is the case, for example, to umount them and
>>> remount in
>>> read only mode so that if I have to turn off the pc, nothing can be
>>> corrupted (is it so?).
>>> What do you suggest?
>>> In case, how can I temporarly umount and remout the file systems in
>>> read
>>> only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such
>>> commands while I'm in KDE?
>>> Thank you,
>>> Xwang
>>>
>>
>> Glad to hear it's working now. I will add the patch and issue a PULL
>> request to get it into the mainline (I had to do this already for
>> several other boards).
>>
>> Regarding your concerns on panic, as long as you have a modern
>> filesystem like ext3, and you don't have alot of applications running
>> which are doing writes, a panic is a pretty safe event. I panic my
>> machine many times a week and never have any problems.
>>
>> Cheers,
>>
>> Devin
>>
>>
>
> ------------------------------------------------------------------------
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
[not found] ` <4A7C00DA.1030805@email.it>
@ 2009-08-07 12:20 ` Devin Heitmueller
2009-08-07 13:23 ` xwang1976
0 siblings, 1 reply; 21+ messages in thread
From: Devin Heitmueller @ 2009-08-07 12:20 UTC (permalink / raw)
To: xwang1976; +Cc: Douglas Schilling Landgraf, linux-media
On Fri, Aug 7, 2009 at 6:24 AM, <xwang1976@email.it> wrote:
> Just a little addendum.
> I remember that the audio of analog tv has started to work with Markus'
> drivers when he added the em28xx-audioep driver because, if I have correctly
> understood, my device has a noy standard audio.
> Is it possible to import the necessary code in the main branch so that to
> have the device fully functional (today it is unusable to see analog tv
> because no audio is present).
> Thank you to all,
> Xwang
The dmesg output suggests your device has an EMP202 on the em28xx ac97
port, which is pretty standard and should be supported by the em28xx
current audio driver. I would have to look closer to better
understand why your audio is not working.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-07 12:20 ` Devin Heitmueller
@ 2009-08-07 13:23 ` xwang1976
0 siblings, 0 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-07 13:23 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Douglas Schilling Landgraf, linux-media
You are right.
I've opened the device and with the help of a magnifier I've seen that
it has an EMP202 (at first I've read EMP702 but I've seen that such chip
does not exist so probably it is an EMP202).
Xwang
Devin Heitmueller ha scritto:
> On Fri, Aug 7, 2009 at 6:24 AM, <xwang1976@email.it> wrote:
>
>> Just a little addendum.
>> I remember that the audio of analog tv has started to work with Markus'
>> drivers when he added the em28xx-audioep driver because, if I have correctly
>> understood, my device has a noy standard audio.
>> Is it possible to import the necessary code in the main branch so that to
>> have the device fully functional (today it is unusable to see analog tv
>> because no audio is present).
>> Thank you to all,
>> Xwang
>>
>
> The dmesg output suggests your device has an EMP202 on the em28xx ac97
> port, which is pretty standard and should be supported by the em28xx
> current audio driver. I would have to look closer to better
> understand why your audio is not working.
>
> Devin
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* New device: Dikom DK-300 (maybe Kworld 323U rebranded)
2009-08-05 20:33 Issues with Empire Dual Pen: request for help and suggestions!!! xwang1976
2009-08-06 13:54 ` xwang1976
@ 2009-08-10 22:27 ` xwang1976
2009-08-10 22:39 ` Devin Heitmueller
1 sibling, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-10 22:27 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 476 bytes --]
Hi,
my brother has brought a Dikom DK-300 usb hybrid tv receiver.
He will use it under windows, but I've tried it with the latest v4l-dvb
driver and I've discovered that it works well as analog tv (video and
audio work using the sox command to send audio from /dev/dsp1 to /dev/dsp).
The digital tv doesn't work (in kaffeine the digital tv icon is not
present).
I post the dmesg obtained connecting the device.
If you want I can test for the next 10 days.
Thank you,
Xwang
[-- Attachment #2: dmesg_dikom-dk300.txt --]
[-- Type: text/plain, Size: 3965 bytes --]
[51167.096148] usb 2-3: new high speed USB device using ehci_hcd and address 6
[51167.231698] usb 2-3: configuration #1 chosen from 1 choice
[51167.231862] em28xx: New device USB 2883 Device @ 480 Mbps (eb1a:e323, interface 0, class 0)
[51167.231871] em28xx #0: Identified as Kworld VS-DVB-T 323UR (card=54)
[51167.232984] em28xx #0: chip ID is em2882/em2883
[51167.364546] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00
[51167.364553] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[51167.364560] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[51167.364566] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[51167.364573] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364579] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364585] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[51167.364591] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[51167.364597] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[51167.364603] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364610] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364616] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364622] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364628] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364634] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364640] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[51167.364647] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x4e913442
[51167.364649] em28xx #0: EEPROM info:
[51167.364650] em28xx #0: AC97 audio (5 sample rates)
[51167.364651] em28xx #0: 500mA max power
[51167.364652] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[51167.364654] em28xx #0:
[51167.364654]
[51167.364656] em28xx #0: The support for this board weren't valid yet.
[51167.364658] em28xx #0: Please send a report of having this working
[51167.364659] em28xx #0: not to V4L mailing list (and/or to other addresses)
[51167.364659]
[51167.367451] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0)
[51167.371212] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[51167.371280] xc2028 6-0061: creating new instance
[51167.371282] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[51167.371287] usb 2-3: firmware: requesting xc3028-v27.fw
[51167.374856] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[51167.420061] xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[51168.329819] xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700.
[51168.352574] SCODE (20000000), id 000000000000b700:
[51168.352584] xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[51168.541315] em28xx #0: Config register raw data: 0xd0
[51168.542051] em28xx #0: AC97 vendor ID = 0xffffffff
[51168.542433] em28xx #0: AC97 features = 0x6a90
[51168.542438] em28xx #0: Empia 202 AC97 audio processor detected
[51168.641549] tvp5150 6-005c: tvp5150am1 detected.
[51168.740935] em28xx #0: v4l2 driver version 0.1.2
[51168.895090] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[51168.895097] em28xx-audio.c: probing for em28x1 non standard usbaudio
[51168.895101] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[51169.112537] tvp5150 6-005c: tvp5150am1 detected.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: New device: Dikom DK-300 (maybe Kworld 323U rebranded)
2009-08-10 22:27 ` New device: Dikom DK-300 (maybe Kworld 323U rebranded) xwang1976
@ 2009-08-10 22:39 ` Devin Heitmueller
0 siblings, 0 replies; 21+ messages in thread
From: Devin Heitmueller @ 2009-08-10 22:39 UTC (permalink / raw)
To: xwang1976; +Cc: linux-media
On Mon, Aug 10, 2009 at 6:27 PM, <xwang1976@email.it> wrote:
> Hi,
> my brother has brought a Dikom DK-300 usb hybrid tv receiver.
> He will use it under windows, but I've tried it with the latest v4l-dvb
> driver and I've discovered that it works well as analog tv (video and audio
> work using the sox command to send audio from /dev/dsp1 to /dev/dsp).
> The digital tv doesn't work (in kaffeine the digital tv icon is not
> present).
> I post the dmesg obtained connecting the device.
> If you want I can test for the next 10 days.
> Thank you,
> Xwang
>
<snip>
Hello Xwang,
In order to add support for the digital side of the device, we would
need to know which demodulator chip is in the device (which you could
get by opening it up).
Alternatively, if you can get a SniffUSB 2.0 capture under Windows,
from the time the device is plugged in, until after the device is
tuned to a digital station, we can probably extrapolate which demod it
has. We're going to need the Windows USB trace anyway in order to
identify what the proper GPIO configuration is.
Personally, I'm not confident I will be able to debug this issue
within the next ten days (I'm about to leave town for the next six
days and I'm already swamped with other work), although some other
developer may be willing to step in and lend a hand.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 21:46 ` xwang1976
@ 2009-08-11 19:42 ` Douglas Schilling Landgraf
2009-08-11 22:51 ` xwang1976
0 siblings, 1 reply; 21+ messages in thread
From: Douglas Schilling Landgraf @ 2009-08-11 19:42 UTC (permalink / raw)
To: xwang1976; +Cc: Devin Heitmueller, linux-media
Hello Xwang,
On Tue, 11 Aug 2009 23:46:43 +0200
xwang1976@email.it wrote:
> Ok!
> I've restored the eprom and now it is recognised again.
Just to confirm, did you the rewrite_eeprom tool?
> The only not working part is analog tv audio which doesn't work even
> if I use the sox command.
Ok.
> >
> > Douglas, in a few minutes I am leaving town for the next five days.
> > Can you help Xwang out to restore his eeprom content using your
> > tool?
Sure Devin.
Cheers,
Douglas
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 22:51 ` xwang1976
@ 2009-08-11 20:08 ` Douglas Schilling Landgraf
2009-08-12 7:36 ` xwang1976
0 siblings, 1 reply; 21+ messages in thread
From: Douglas Schilling Landgraf @ 2009-08-11 20:08 UTC (permalink / raw)
To: xwang1976; +Cc: Devin Heitmueller, linux-media
Hello Xwang,
On Wed, 12 Aug 2009 00:51:13 +0200
xwang1976@email.it wrote:
> I've used the rewrite_eeprom_v_1_4 which you send me 5 month ago when
> the eprom got corrupted for the first time.
Great, now it's available at v4l-dvb tree.
Anyway, now we need to check the audio issue.
Thanks!
Douglas
> Xwang
>
> Douglas Schilling Landgraf ha scritto:
> > Hello Xwang,
> >
> > On Tue, 11 Aug 2009 23:46:43 +0200
> > xwang1976@email.it wrote:
> >
> >
> >> Ok!
> >> I've restored the eprom and now it is recognised again.
> >>
> >
> > Just to confirm, did you the rewrite_eeprom tool?
> >
> >
> >> The only not working part is analog tv audio which doesn't work
> >> even if I use the sox command.
> >>
> >
> > Ok.
> >
> >
> >>> Douglas, in a few minutes I am leaving town for the next five
> >>> days. Can you help Xwang out to restore his eeprom content using
> >>> your tool?
> >>>
> >
> > Sure Devin.
> >
> > Cheers,
> > Douglas
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-media" in the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> >
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-06 16:22 ` xwang1976
2009-08-07 11:10 ` xwang1976
[not found] ` <4A7C00DA.1030805@email.it>
@ 2009-08-11 20:24 ` xwang1976
2009-08-11 20:34 ` Devin Heitmueller
2009-08-16 9:23 ` Using two different usb devices (at least not at the same time) xwang1976
2 siblings, 2 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-11 20:24 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Douglas Schilling Landgraf, linux-media
[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]
Hi to all!
I don't know why, but today my device has changed its EEPROM hash to the
following value 0x396a0441
as you can see from the attached dmesg.
So it is not recognized anymore.
Is there something that can cause such a change?
I suspect it is not the first time that the eprom hash of this device
change.
Can you help me?
Xwang
PS Meantime I will change the hash and test if the device work again.
xwang1976@email.it ha scritto:
> Ok,
> I've tried to tune analog tv with tvtime-scanner and all the channels
> have been tuned corretly.
> However, even if I use the following command to redirect the audio
> from the device to the audio card:
> sox -r 48000 -t alsa hw:1,0 -t alsa default &
> no audio is present when I start tv time and sox exits with the output
> as in the attached file.
> If it is possible to fix this, this device can be added to the fully
> supported ones.
> Xwang
>
> Devin Heitmueller ha scritto:
>> On Thu, Aug 6, 2009 at 11:16 AM, <xwang1976@email.it> wrote:
>>
>>> Ok,
>>> I've made the change and now the digital tv works perfectly.
>>> So now I should test the analog tv, but I fear to have another
>>> kernel panic.
>>> Is there something I can do before testing so that to be sure that
>>> at least
>>> all the file system are in a safety condition even if a kernel panic
>>> happens.
>>> I'm wondering if it is the case, for example, to umount them and
>>> remount in
>>> read only mode so that if I have to turn off the pc, nothing can be
>>> corrupted (is it so?).
>>> What do you suggest?
>>> In case, how can I temporarly umount and remout the file systems in
>>> read
>>> only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such
>>> commands while I'm in KDE?
>>> Thank you,
>>> Xwang
>>>
>>
>> Glad to hear it's working now. I will add the patch and issue a PULL
>> request to get it into the mainline (I had to do this already for
>> several other boards).
>>
>> Regarding your concerns on panic, as long as you have a modern
>> filesystem like ext3, and you don't have alot of applications running
>> which are doing writes, a panic is a pretty safe event. I panic my
>> machine many times a week and never have any problems.
>>
>> Cheers,
>>
>> Devin
>>
>>
>
> ------------------------------------------------------------------------
>
[-- Attachment #2: dmesg_empire.txt --]
[-- Type: text/plain, Size: 12723 bytes --]
[ 2150.880753] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0)
[ 2150.880763] em28xx #0: Identified as MSI DigiVox A/D (card=49)
[ 2150.880937] em28xx #0: chip ID is em2882/em2883
[ 2151.043937] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00
[ 2151.043945] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00
[ 2151.043952] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 2151.043958] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 2151.043965] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.043972] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.043978] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 2151.043985] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00
[ 2151.043991] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 2151.043998] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044014] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044020] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044027] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044034] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044040] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044048] em28xx #0: i2c eeprom f0: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2151.044057] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x396a0441
[ 2151.044059] em28xx #0: EEPROM info:
[ 2151.044060] em28xx #0: AC97 audio (5 sample rates)
[ 2151.044062] em28xx #0: 500mA max power
[ 2151.044063] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 2151.050209] em28xx #0: found i2c device @ 0x1e [???]
[ 2151.074553] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 2151.079193] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[ 2151.081085] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[ 2151.092318] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 2151.092322] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 2151.092324] em28xx #0: Please send an email with this log to:
[ 2151.092326] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 2151.092328] em28xx #0: Board eeprom hash is 0x396a0441
[ 2151.092330] em28xx #0: Board i2c devicelist hash is 0x944d008f
[ 2151.092332] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 2151.092335] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 2151.092337] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 2151.092339] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 2151.092341] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 2151.092343] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 2151.092345] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 2151.092347] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 2151.092349] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 2151.092352] em28xx #0: card=8 -> Kworld USB2800
[ 2151.092354] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[ 2151.092356] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 2151.092358] em28xx #0: card=11 -> Terratec Hybrid XS
[ 2151.092360] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 2151.092362] em28xx #0: card=13 -> Terratec Prodigy XS
[ 2151.092365] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[ 2151.092367] em28xx #0: card=15 -> V-Gear PocketTV
[ 2151.092369] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 2151.092371] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 2151.092374] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 2151.092376] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[ 2151.092378] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 2151.092380] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 2151.092382] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[ 2151.092385] em28xx #0: card=23 -> Huaqi DLCW-130
[ 2151.092387] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 2151.092389] em28xx #0: card=25 -> Gadmei UTV310
[ 2151.092391] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 2151.092393] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 2151.092395] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 2151.092397] em28xx #0: card=29 -> <NULL>
[ 2151.092399] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 2151.092401] em28xx #0: card=31 -> Usbgear VD204v9
[ 2151.092403] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 2151.092405] em28xx #0: card=33 -> <NULL>
[ 2151.092407] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 2151.092409] em28xx #0: card=35 -> Typhoon DVD Maker
[ 2151.092411] em28xx #0: card=36 -> NetGMBH Cam
[ 2151.092413] em28xx #0: card=37 -> Gadmei UTV330
[ 2151.092415] em28xx #0: card=38 -> Yakumo MovieMixer
[ 2151.092417] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 2151.092419] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 2151.092421] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 2151.092423] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 2151.092425] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 2151.092427] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 2151.092430] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 2151.092432] em28xx #0: card=46 -> Compro, VideoMate U3
[ 2151.092434] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 2151.092436] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 2151.092437] em28xx #0: card=49 -> MSI DigiVox A/D
[ 2151.092439] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 2151.092441] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 2151.092443] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 2151.092446] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 2151.092448] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 2151.092450] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 2151.092452] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 2151.092454] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 2151.092456] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 2151.092458] em28xx #0: card=59 -> <NULL>
[ 2151.092460] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[ 2151.092462] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[ 2151.092464] em28xx #0: card=62 -> Gadmei TVR200
[ 2151.092466] em28xx #0: card=63 -> Kaiomy TVnPC U2
[ 2151.092468] em28xx #0: card=64 -> Easy Cap Capture DC-60
[ 2151.092470] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[ 2151.092472] em28xx #0: card=66 -> Empire dual TV
[ 2151.092474] em28xx #0: card=67 -> Terratec Grabby
[ 2151.092476] em28xx #0: card=68 -> Terratec AV350
[ 2151.092478] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[ 2151.092480] em28xx #0: card=70 -> Evga inDtube
[ 2151.092482] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[ 2151.168064] em28xx #0:
[ 2151.168066]
[ 2151.168070] em28xx #0: The support for this board weren't valid yet.
[ 2151.168074] em28xx #0: Please send a report of having this working
[ 2151.168077] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 2151.168079]
[ 2151.174043] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0)
[ 2151.182262] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[ 2151.182441] xc2028 6-0061: creating new instance
[ 2151.182445] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[ 2151.182457] usb 2-3: firmware: requesting xc3028-v27.fw
[ 2151.193573] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 2151.252123] xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2152.198958] xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700.
[ 2152.213606] SCODE (20000000), id 000000000000b700:
[ 2152.213615] xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 2152.396208] em28xx #0: Config register raw data: 0xd0
[ 2152.396944] em28xx #0: AC97 vendor ID = 0xffffffff
[ 2152.397434] em28xx #0: AC97 features = 0x6a90
[ 2152.397438] em28xx #0: Empia 202 AC97 audio processor detected
[ 2152.520819] tvp5150 6-005c: tvp5150am1 detected.
[ 2152.621320] em28xx #0: v4l2 driver version 0.1.2
[ 2152.707099] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 2152.707106] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 2152.707110] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 2152.741984] em28xx video device (eb1a:e310): interface 1, class 255 found.
[ 2152.741991] em28xx This is an anciliary interface not used by the driver
[ 2152.817542] tvp5150 6-005c: tvp5150am1 detected.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 20:24 ` xwang1976
@ 2009-08-11 20:34 ` Devin Heitmueller
2009-08-11 21:46 ` xwang1976
2009-08-16 9:23 ` Using two different usb devices (at least not at the same time) xwang1976
1 sibling, 1 reply; 21+ messages in thread
From: Devin Heitmueller @ 2009-08-11 20:34 UTC (permalink / raw)
To: xwang1976; +Cc: Douglas Schilling Landgraf, linux-media
On Tue, Aug 11, 2009 at 4:24 PM, <xwang1976@email.it> wrote:
> Hi to all!
> I don't know why, but today my device has changed its EEPROM hash to the
> following value 0x396a0441
> as you can see from the attached dmesg.
> So it is not recognized anymore.
> Is there something that can cause such a change?
> I suspect it is not the first time that the eprom hash of this device
> change.
> Can you help me?
> Xwang
>
> PS Meantime I will change the hash and test if the device work again.
Comparing the two eeprom dumps (the one from your previous email
versus the one you just sent), it would appear that something resulted
in the value 0xFF written to offset 0xF0. What were you doing
immediately prior to the failure? I'm not sure how we could have
gotten into this state.
Douglas, in a few minutes I am leaving town for the next five days.
Can you help Xwang out to restore his eeprom content using your tool?
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 20:34 ` Devin Heitmueller
@ 2009-08-11 21:46 ` xwang1976
2009-08-11 19:42 ` Douglas Schilling Landgraf
0 siblings, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-11 21:46 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Douglas Schilling Landgraf, linux-media
Ok!
I've restored the eprom and now it is recognised again.
The only not working part is analog tv audio which doesn't work even if
I use the sox command.
Thank you,
Xwang
Devin Heitmueller ha scritto:
> On Tue, Aug 11, 2009 at 4:24 PM, <xwang1976@email.it> wrote:
>
>> Hi to all!
>> I don't know why, but today my device has changed its EEPROM hash to the
>> following value 0x396a0441
>> as you can see from the attached dmesg.
>> So it is not recognized anymore.
>> Is there something that can cause such a change?
>> I suspect it is not the first time that the eprom hash of this device
>> change.
>> Can you help me?
>> Xwang
>>
>> PS Meantime I will change the hash and test if the device work again.
>>
>
> Comparing the two eeprom dumps (the one from your previous email
> versus the one you just sent), it would appear that something resulted
> in the value 0xFF written to offset 0xF0. What were you doing
> immediately prior to the failure? I'm not sure how we could have
> gotten into this state.
>
> Douglas, in a few minutes I am leaving town for the next five days.
> Can you help Xwang out to restore his eeprom content using your tool?
>
> Devin
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 19:42 ` Douglas Schilling Landgraf
@ 2009-08-11 22:51 ` xwang1976
2009-08-11 20:08 ` Douglas Schilling Landgraf
0 siblings, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-11 22:51 UTC (permalink / raw)
To: Douglas Schilling Landgraf; +Cc: Devin Heitmueller, linux-media
I've used the rewrite_eeprom_v_1_4 which you send me 5 month ago when
the eprom got corrupted for the first time.
Xwang
Douglas Schilling Landgraf ha scritto:
> Hello Xwang,
>
> On Tue, 11 Aug 2009 23:46:43 +0200
> xwang1976@email.it wrote:
>
>
>> Ok!
>> I've restored the eprom and now it is recognised again.
>>
>
> Just to confirm, did you the rewrite_eeprom tool?
>
>
>> The only not working part is analog tv audio which doesn't work even
>> if I use the sox command.
>>
>
> Ok.
>
>
>>> Douglas, in a few minutes I am leaving town for the next five days.
>>> Can you help Xwang out to restore his eeprom content using your
>>> tool?
>>>
>
> Sure Devin.
>
> Cheers,
> Douglas
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Issues with Empire Dual Pen: request for help and suggestions!!!
2009-08-11 20:08 ` Douglas Schilling Landgraf
@ 2009-08-12 7:36 ` xwang1976
2009-11-15 13:12 ` No analog audio for the " Andrea.Amorosi76
0 siblings, 1 reply; 21+ messages in thread
From: xwang1976 @ 2009-08-12 7:36 UTC (permalink / raw)
To: Douglas Schilling Landgraf; +Cc: Devin Heitmueller, linux-media
When you want we can check the audio issue.
Consider that actually I've installed the latest main v4l-dvb (to test
if all the patches have been ported to themain tree) and it's ok.
However I have no problem to install your tree driver again to test
whatever is needed to have a fully functional device.
Xwang
PS the device has also a s-video (9 pin) input. In case I can test it,
but I prefer to do that after the analog audio isssue has been solved
Douglas Schilling Landgraf ha scritto:
> Hello Xwang,
>
> On Wed, 12 Aug 2009 00:51:13 +0200
> xwang1976@email.it wrote:
>
>
>> I've used the rewrite_eeprom_v_1_4 which you send me 5 month ago when
>> the eprom got corrupted for the first time.
>>
>
> Great, now it's available at v4l-dvb tree.
>
> Anyway, now we need to check the audio issue.
>
> Thanks!
> Douglas
>
>
>> Xwang
>>
>> Douglas Schilling Landgraf ha scritto:
>>
>>> Hello Xwang,
>>>
>>> On Tue, 11 Aug 2009 23:46:43 +0200
>>> xwang1976@email.it wrote:
>>>
>>>
>>>
>>>> Ok!
>>>> I've restored the eprom and now it is recognised again.
>>>>
>>>>
>>> Just to confirm, did you the rewrite_eeprom tool?
>>>
>>>
>>>
>>>> The only not working part is analog tv audio which doesn't work
>>>> even if I use the sox command.
>>>>
>>>>
>>> Ok.
>>>
>>>
>>>
>>>>> Douglas, in a few minutes I am leaving town for the next five
>>>>> days. Can you help Xwang out to restore his eeprom content using
>>>>> your tool?
>>>>>
>>>>>
>>> Sure Devin.
>>>
>>> Cheers,
>>> Douglas
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-media" in the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Using two different usb devices (at least not at the same time).
2009-08-11 20:24 ` xwang1976
2009-08-11 20:34 ` Devin Heitmueller
@ 2009-08-16 9:23 ` xwang1976
1 sibling, 0 replies; 21+ messages in thread
From: xwang1976 @ 2009-08-16 9:23 UTC (permalink / raw)
To: linux-media
Hi to all!
As you probably know from my previous mails, I own two usb hybrid devices:
1) Empire Dual Pen
2) Dikom DK-300
There are still some problems with them (which I hope I can help solving
with my testing) and I would like to know if I can use one of them and
then the other without the need of module removal or if it is better to
manually rmmod the em28xx modules after the removal of the first device
and before the insertion of the second one.
Thank you,
Xwang
^ permalink raw reply [flat|nested] 21+ messages in thread
* No analog audio for the Empire Dual Pen: request for help and suggestions!!!
2009-08-12 7:36 ` xwang1976
@ 2009-11-15 13:12 ` Andrea.Amorosi76
2009-11-16 4:14 ` Devin Heitmueller
0 siblings, 1 reply; 21+ messages in thread
From: Andrea.Amorosi76 @ 2009-11-15 13:12 UTC (permalink / raw)
To: Douglas Schilling Landgraf; +Cc: Devin Heitmueller, Linux Media Mailing List
I would like to solve this analog audio issue (this device would be
useful in the future thanks to the 9 pin s-video input which, I think
can take the output of an external dvb-t decoder so that to be able to
see cripted digital tv or from consoles to play and use notebook display
as a tv).
Following the (little) expertise gained with the Dikom DK300, I think
that the default_analog gpio is not correct for the device.
Can I try with others gpio or a wrong gpio can phisically break the device?
Otherwise how can I create a correct gpio for this device?
Thank you,
Andrea (Xwang was my nickname)
xwang1976@email.it ha scritto:
> When you want we can check the audio issue.
> Consider that actually I've installed the latest main v4l-dvb (to test
> if all the patches have been ported to themain tree) and it's ok.
> However I have no problem to install your tree driver again to test
> whatever is needed to have a fully functional device.
> Xwang
>
> PS the device has also a s-video (9 pin) input. In case I can test it,
> but I prefer to do that after the analog audio isssue has been solved
>
> Douglas Schilling Landgraf ha scritto:
>> Hello Xwang,
>>
>> On Wed, 12 Aug 2009 00:51:13 +0200
>> xwang1976@email.it wrote:
>>
>>
>>> I've used the rewrite_eeprom_v_1_4 which you send me 5 month ago when
>>> the eprom got corrupted for the first time.
>>>
>>
>> Great, now it's available at v4l-dvb tree.
>>
>> Anyway, now we need to check the audio issue.
>>
>> Thanks!
>> Douglas
>>
>>
>>> Xwang
>>>
>>> Douglas Schilling Landgraf ha scritto:
>>>
>>>> Hello Xwang,
>>>>
>>>> On Tue, 11 Aug 2009 23:46:43 +0200
>>>> xwang1976@email.it wrote:
>>>>
>>>>
>>>>> Ok!
>>>>> I've restored the eprom and now it is recognised again.
>>>>>
>>>> Just to confirm, did you the rewrite_eeprom tool?
>>>>
>>>>
>>>>> The only not working part is analog tv audio which doesn't work
>>>>> even if I use the sox command.
>>>>>
>>>> Ok.
>>>>
>>>>
>>>>>> Douglas, in a few minutes I am leaving town for the next five
>>>>>> days. Can you help Xwang out to restore his eeprom content using
>>>>>> your tool?
>>>>>>
>>>> Sure Devin.
>>>>
>>>> Cheers,
>>>> Douglas
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> linux-media" in the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: No analog audio for the Empire Dual Pen: request for help and suggestions!!!
2009-11-15 13:12 ` No analog audio for the " Andrea.Amorosi76
@ 2009-11-16 4:14 ` Devin Heitmueller
0 siblings, 0 replies; 21+ messages in thread
From: Devin Heitmueller @ 2009-11-16 4:14 UTC (permalink / raw)
To: Andrea.Amorosi76; +Cc: Douglas Schilling Landgraf, Linux Media Mailing List
On Sun, Nov 15, 2009 at 8:12 AM, Andrea.Amorosi76@gmail.com
<Andrea.Amorosi76@gmail.com> wrote:
> I would like to solve this analog audio issue (this device would be useful
> in the future thanks to the 9 pin s-video input which, I think can take the
> output of an external dvb-t decoder so that to be able to see cripted
> digital tv or from consoles to play and use notebook display as a tv).
> Following the (little) expertise gained with the Dikom DK300, I think that
> the default_analog gpio is not correct for the device.
> Can I try with others gpio or a wrong gpio can phisically break the device?
> Otherwise how can I create a correct gpio for this device?
> Thank you,
> Andrea (Xwang was my nickname)
Hello Andrea,
To determine the correct analog_gpio, I typically do an analog capture
under Windows, and use sniffusb to determine how the GPIO register is
set at the time the analog video is being streamed.
http://www.pcausa.com/Utilities/UsbSnoop/
Generally speaking, you probably do not want to experiment toggling
the GPIOs individually, since you can have conditions such as the
digital demod running at the same time as the analog subsystem (which
would draw too much power).
It's worth noting also that it is entirely possible that a LEDs are
attached to GPIO pins as well (in regards to your other question about
the LED behavior).
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2009-11-16 4:14 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-05 20:33 Issues with Empire Dual Pen: request for help and suggestions!!! xwang1976
2009-08-06 13:54 ` xwang1976
2009-08-06 14:17 ` Devin Heitmueller
[not found] ` <20090806112317.21240b9c@gmail.com>
2009-08-06 15:16 ` xwang1976
2009-08-06 15:21 ` Devin Heitmueller
2009-08-06 16:22 ` xwang1976
2009-08-07 11:10 ` xwang1976
[not found] ` <4A7C00DA.1030805@email.it>
2009-08-07 12:20 ` Devin Heitmueller
2009-08-07 13:23 ` xwang1976
2009-08-11 20:24 ` xwang1976
2009-08-11 20:34 ` Devin Heitmueller
2009-08-11 21:46 ` xwang1976
2009-08-11 19:42 ` Douglas Schilling Landgraf
2009-08-11 22:51 ` xwang1976
2009-08-11 20:08 ` Douglas Schilling Landgraf
2009-08-12 7:36 ` xwang1976
2009-11-15 13:12 ` No analog audio for the " Andrea.Amorosi76
2009-11-16 4:14 ` Devin Heitmueller
2009-08-16 9:23 ` Using two different usb devices (at least not at the same time) xwang1976
2009-08-10 22:27 ` New device: Dikom DK-300 (maybe Kworld 323U rebranded) xwang1976
2009-08-10 22:39 ` Devin Heitmueller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.