* Pinnacle Hybrid Pro Stick (320e)?
@ 2009-08-23 12:48 Németh Márton
2009-08-23 13:06 ` hermann pitton
0 siblings, 1 reply; 10+ messages in thread
From: Németh Márton @ 2009-08-23 12:48 UTC (permalink / raw)
To: V4L Mailing List; +Cc: Németh Márton
Hi,
I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
[ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
[ 145.598079] Linux video capture interface: v2.00
[ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 145.742186] em28xx #0: chip ID is em2882/em2883
[ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[ 145.823334] em28xx #0: EEPROM info:
[ 145.823336] em28xx #0: AC97 audio (5 sample rates)
[ 145.823340] em28xx #0: USB Remote wakeup capable
[ 145.823342] em28xx #0: 500mA max power
[ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 145.880355] em28xx #0: Please send an email with this log to:
[ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 145.880398] em28xx #0: card=8 -> Kworld USB2800
[ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
[ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
[ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
[ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
[ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
[ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 145.880470] em28xx #0: card=29 -> <NULL>
[ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
[ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 145.880482] em28xx #0: card=33 -> <NULL>
[ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
[ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
[ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
[ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
[ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
[ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
[ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 145.880567] em28xx #0: card=59 -> <NULL>
[ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
[ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
[ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
[ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[ 145.880590] em28xx #0: card=66 -> Empire dual TV
[ 145.880593] em28xx #0: card=67 -> Terratec Grabby
[ 145.880596] em28xx #0: card=68 -> Terratec AV350
[ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[ 145.880602] em28xx #0: card=70 -> Evga inDtube
[ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[ 145.880716] em28xx #0: Config register raw data: 0x58
[ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[ 145.890963] em28xx #0: AC97 features = 0x3eb0
[ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
[ 145.922320] em28xx #0: v4l2 driver version 0.1.2
[ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 146.027706] usbcore: registered new interface driver em28xx
[ 146.027787] em28xx driver loaded
[ 146.062766] usbcore: registered new interface driver snd-usb-audio
This device was working with 2.6.28 together with the out-of-tree
driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
What has to be done in order this device can work with the newest Linux kernel?
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 12:48 Pinnacle Hybrid Pro Stick (320e)? Németh Márton
@ 2009-08-23 13:06 ` hermann pitton
2009-08-23 13:14 ` Németh Márton
0 siblings, 1 reply; 10+ messages in thread
From: hermann pitton @ 2009-08-23 13:06 UTC (permalink / raw)
To: Németh Márton; +Cc: V4L Mailing List
Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
> Hi,
>
> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
>
> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
> [ 145.598079] Linux video capture interface: v2.00
> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
> [ 145.742186] em28xx #0: chip ID is em2882/em2883
> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
> [ 145.823334] em28xx #0: EEPROM info:
> [ 145.823336] em28xx #0: AC97 audio (5 sample rates)
> [ 145.823340] em28xx #0: USB Remote wakeup capable
> [ 145.823342] em28xx #0: 500mA max power
> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
> [ 145.880355] em28xx #0: Please send an email with this log to:
> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800
> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
> [ 145.880470] em28xx #0: card=29 -> <NULL>
> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
> [ 145.880482] em28xx #0: card=33 -> <NULL>
> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
> [ 145.880567] em28xx #0: card=59 -> <NULL>
> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
> [ 145.880590] em28xx #0: card=66 -> Empire dual TV
> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby
> [ 145.880596] em28xx #0: card=68 -> Terratec AV350
> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
> [ 145.880602] em28xx #0: card=70 -> Evga inDtube
> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
> [ 145.880716] em28xx #0: Config register raw data: 0x58
> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
> [ 145.890963] em28xx #0: AC97 features = 0x3eb0
> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2
> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
> [ 146.027706] usbcore: registered new interface driver em28xx
> [ 146.027787] em28xx driver loaded
> [ 146.062766] usbcore: registered new interface driver snd-usb-audio
>
> This device was working with 2.6.28 together with the out-of-tree
> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
>
> What has to be done in order this device can work with the newest Linux kernel?
>
> Regards,
>
> Márton Németh
>
never use trees deliberately out-of-tree?
Buy an expensive device from Markus with first class support and forget
about all others ...
*
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:06 ` hermann pitton
@ 2009-08-23 13:14 ` Németh Márton
2009-08-23 13:18 ` hermann pitton
0 siblings, 1 reply; 10+ messages in thread
From: Németh Márton @ 2009-08-23 13:14 UTC (permalink / raw)
To: hermann pitton; +Cc: V4L Mailing List
hermann pitton wrote:
> Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
>> Hi,
>>
>> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
>> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
>>
>> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
>> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
>> [ 145.598079] Linux video capture interface: v2.00
>> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
>> [ 145.742186] em28xx #0: chip ID is em2882/em2883
>> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
>> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
>> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
>> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
>> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
>> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
>> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
>> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
>> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
>> [ 145.823334] em28xx #0: EEPROM info:
>> [ 145.823336] em28xx #0: AC97 audio (5 sample rates)
>> [ 145.823340] em28xx #0: USB Remote wakeup capable
>> [ 145.823342] em28xx #0: 500mA max power
>> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
>> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
>> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
>> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
>> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
>> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
>> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
>> [ 145.880355] em28xx #0: Please send an email with this log to:
>> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
>> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
>> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
>> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
>> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
>> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
>> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
>> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
>> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
>> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
>> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
>> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
>> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800
>> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
>> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
>> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
>> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
>> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
>> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
>> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
>> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
>> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
>> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
>> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
>> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
>> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
>> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
>> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
>> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
>> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
>> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
>> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
>> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
>> [ 145.880470] em28xx #0: card=29 -> <NULL>
>> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
>> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
>> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
>> [ 145.880482] em28xx #0: card=33 -> <NULL>
>> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
>> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
>> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
>> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
>> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
>> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
>> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
>> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
>> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
>> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
>> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
>> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
>> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
>> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
>> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
>> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
>> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
>> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
>> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
>> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
>> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
>> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
>> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
>> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
>> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
>> [ 145.880567] em28xx #0: card=59 -> <NULL>
>> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
>> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
>> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
>> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
>> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
>> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
>> [ 145.880590] em28xx #0: card=66 -> Empire dual TV
>> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby
>> [ 145.880596] em28xx #0: card=68 -> Terratec AV350
>> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
>> [ 145.880602] em28xx #0: card=70 -> Evga inDtube
>> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
>> [ 145.880716] em28xx #0: Config register raw data: 0x58
>> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
>> [ 145.890963] em28xx #0: AC97 features = 0x3eb0
>> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
>> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2
>> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
>> [ 146.027706] usbcore: registered new interface driver em28xx
>> [ 146.027787] em28xx driver loaded
>> [ 146.062766] usbcore: registered new interface driver snd-usb-audio
>>
>> This device was working with 2.6.28 together with the out-of-tree
>> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
>>
>> What has to be done in order this device can work with the newest Linux kernel?
>>
>> Regards,
>>
>> Márton Németh
>>
>
> never use trees deliberately out-of-tree?
Maybe I was not clear enough in my description. Currently I am using
2.6.31-rc7 without any modification. This version contained the message
that I should contact this mailing list (see at 145.880355).
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:14 ` Németh Márton
@ 2009-08-23 13:18 ` hermann pitton
2009-08-23 13:29 ` Devin Heitmueller
0 siblings, 1 reply; 10+ messages in thread
From: hermann pitton @ 2009-08-23 13:18 UTC (permalink / raw)
To: Németh Márton; +Cc: V4L Mailing List
Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:
> hermann pitton wrote:
> > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
> >> Hi,
> >>
> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
> >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
> >>
> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
> >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
> >> [ 145.598079] Linux video capture interface: v2.00
> >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
> >> [ 145.742186] em28xx #0: chip ID is em2882/em2883
> >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
> >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
> >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
> >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
> >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
> >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
> >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
> >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
> >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
> >> [ 145.823334] em28xx #0: EEPROM info:
> >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates)
> >> [ 145.823340] em28xx #0: USB Remote wakeup capable
> >> [ 145.823342] em28xx #0: 500mA max power
> >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
> >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
> >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
> >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
> >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
> >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
> >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
> >> [ 145.880355] em28xx #0: Please send an email with this log to:
> >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
> >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
> >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
> >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
> >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
> >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
> >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
> >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
> >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
> >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
> >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
> >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800
> >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
> >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
> >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
> >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
> >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
> >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
> >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
> >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
> >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
> >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
> >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
> >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
> >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
> >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
> >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
> >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
> >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
> >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
> >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
> >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
> >> [ 145.880470] em28xx #0: card=29 -> <NULL>
> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
> >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
> >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
> >> [ 145.880482] em28xx #0: card=33 -> <NULL>
> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
> >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
> >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
> >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
> >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
> >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
> >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
> >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
> >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
> >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
> >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
> >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
> >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
> >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
> >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
> >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
> >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
> >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
> >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
> >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
> >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
> >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
> >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
> >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
> >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
> >> [ 145.880567] em28xx #0: card=59 -> <NULL>
> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
> >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
> >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
> >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
> >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
> >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
> >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV
> >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby
> >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350
> >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
> >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube
> >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
> >> [ 145.880716] em28xx #0: Config register raw data: 0x58
> >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
> >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0
> >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
> >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2
> >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
> >> [ 146.027706] usbcore: registered new interface driver em28xx
> >> [ 146.027787] em28xx driver loaded
> >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio
> >>
> >> This device was working with 2.6.28 together with the out-of-tree
> >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
> >>
> >> What has to be done in order this device can work with the newest Linux kernel?
> >>
> >> Regards,
> >>
> >> Márton Németh
> >>
> >
> > never use trees deliberately out-of-tree?
>
> Maybe I was not clear enough in my description. Currently I am using
> 2.6.31-rc7 without any modification. This version contained the message
> that I should contact this mailing list (see at 145.880355).
>
> Regards,
>
> Márton Németh
oooh, good that we have that message now.
Then, port all you still can get before he closed his sources?
Cheers,
Hermann
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:18 ` hermann pitton
@ 2009-08-23 13:29 ` Devin Heitmueller
2009-08-23 13:45 ` hermann pitton
2009-08-30 7:18 ` Németh Márton
0 siblings, 2 replies; 10+ messages in thread
From: Devin Heitmueller @ 2009-08-23 13:29 UTC (permalink / raw)
To: hermann pitton; +Cc: Németh Márton, V4L Mailing List
2009/8/23 hermann pitton <hermann-pitton@arcor.de>:
>
> Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:
>> hermann pitton wrote:
>> > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
>> >> Hi,
>> >>
>> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
>> >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
>> >>
>> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
>> >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
>> >> [ 145.598079] Linux video capture interface: v2.00
>> >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
>> >> [ 145.742186] em28xx #0: chip ID is em2882/em2883
>> >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
>> >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
>> >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
>> >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
>> >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
>> >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
>> >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
>> >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
>> >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>> >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
>> >> [ 145.823334] em28xx #0: EEPROM info:
>> >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates)
>> >> [ 145.823340] em28xx #0: USB Remote wakeup capable
>> >> [ 145.823342] em28xx #0: 500mA max power
>> >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
>> >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
>> >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
>> >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
>> >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
>> >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
>> >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
>> >> [ 145.880355] em28xx #0: Please send an email with this log to:
>> >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
>> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
>> >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
>> >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
>> >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
>> >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
>> >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
>> >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
>> >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
>> >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
>> >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
>> >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
>> >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800
>> >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
>> >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
>> >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
>> >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
>> >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
>> >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
>> >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
>> >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
>> >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
>> >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
>> >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
>> >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
>> >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
>> >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
>> >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
>> >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
>> >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
>> >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
>> >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
>> >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
>> >> [ 145.880470] em28xx #0: card=29 -> <NULL>
>> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
>> >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
>> >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
>> >> [ 145.880482] em28xx #0: card=33 -> <NULL>
>> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
>> >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
>> >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
>> >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
>> >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
>> >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
>> >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
>> >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
>> >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
>> >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
>> >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
>> >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
>> >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
>> >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
>> >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
>> >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
>> >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
>> >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
>> >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
>> >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
>> >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
>> >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
>> >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
>> >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
>> >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
>> >> [ 145.880567] em28xx #0: card=59 -> <NULL>
>> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
>> >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
>> >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
>> >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
>> >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
>> >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
>> >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV
>> >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby
>> >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350
>> >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
>> >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube
>> >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
>> >> [ 145.880716] em28xx #0: Config register raw data: 0x58
>> >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
>> >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0
>> >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
>> >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2
>> >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
>> >> [ 146.027706] usbcore: registered new interface driver em28xx
>> >> [ 146.027787] em28xx driver loaded
>> >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio
>> >>
>> >> This device was working with 2.6.28 together with the out-of-tree
>> >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
>> >>
>> >> What has to be done in order this device can work with the newest Linux kernel?
>> >>
>> >> Regards,
>> >>
>> >> Márton Németh
>> >>
>> >
>> > never use trees deliberately out-of-tree?
>>
>> Maybe I was not clear enough in my description. Currently I am using
>> 2.6.31-rc7 without any modification. This version contained the message
>> that I should contact this mailing list (see at 145.880355).
>>
>> Regards,
>>
>> Márton Németh
>
> oooh, good that we have that message now.
>
> Then, port all you still can get before he closed his sources?
>
> Cheers,
> Hermann
Hello Németh,
I committed some changes to get this board working a few weeks ago. I
will check your dmesg output and see if the changes missed the merge
window. It's possible the changes didn't make it in time for 2.6.31,
so I will have to check.
Cheers,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:29 ` Devin Heitmueller
@ 2009-08-23 13:45 ` hermann pitton
2009-08-24 19:18 ` Devin Heitmueller
2009-08-30 7:18 ` Németh Márton
1 sibling, 1 reply; 10+ messages in thread
From: hermann pitton @ 2009-08-23 13:45 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: Németh Márton, V4L Mailing List
Am Sonntag, den 23.08.2009, 09:29 -0400 schrieb Devin Heitmueller:
> 2009/8/23 hermann pitton <hermann-pitton@arcor.de>:
> >
> > Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:
> >> hermann pitton wrote:
> >> > Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:
> >> >> Hi,
> >> >>
> >> >> I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel
> >> >> 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':
> >> >>
> >> >> [ 144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
> >> >> [ 144.556371] usb 3-3: configuration #1 chosen from 1 choice
> >> >> [ 145.598079] Linux video capture interface: v2.00
> >> >> [ 145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
> >> >> [ 145.742186] em28xx #0: chip ID is em2882/em2883
> >> >> [ 145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
> >> >> [ 145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
> >> >> [ 145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
> >> >> [ 145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
> >> >> [ 145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
> >> >> [ 145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
> >> >> [ 145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
> >> >> [ 145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> >> >> [ 145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
> >> >> [ 145.823334] em28xx #0: EEPROM info:
> >> >> [ 145.823336] em28xx #0: AC97 audio (5 sample rates)
> >> >> [ 145.823340] em28xx #0: USB Remote wakeup capable
> >> >> [ 145.823342] em28xx #0: 500mA max power
> >> >> [ 145.823346] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
> >> >> [ 145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
> >> >> [ 145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
> >> >> [ 145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
> >> >> [ 145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
> >> >> [ 145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
> >> >> [ 145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
> >> >> [ 145.880355] em28xx #0: Please send an email with this log to:
> >> >> [ 145.880358] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
> >> >> [ 145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
> >> >> [ 145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
> >> >> [ 145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
> >> >> [ 145.880372] em28xx #0: card=0 -> Unknown EM2800 video grabber
> >> >> [ 145.880375] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
> >> >> [ 145.880379] em28xx #0: card=2 -> Terratec Cinergy 250 USB
> >> >> [ 145.880382] em28xx #0: card=3 -> Pinnacle PCTV USB 2
> >> >> [ 145.880385] em28xx #0: card=4 -> Hauppauge WinTV USB 2
> >> >> [ 145.880389] em28xx #0: card=5 -> MSI VOX USB 2.0
> >> >> [ 145.880392] em28xx #0: card=6 -> Terratec Cinergy 200 USB
> >> >> [ 145.880395] em28xx #0: card=7 -> Leadtek Winfast USB II
> >> >> [ 145.880398] em28xx #0: card=8 -> Kworld USB2800
> >> >> [ 145.880401] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
> >> >> [ 145.880405] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
> >> >> [ 145.880409] em28xx #0: card=11 -> Terratec Hybrid XS
> >> >> [ 145.880412] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
> >> >> [ 145.880415] em28xx #0: card=13 -> Terratec Prodigy XS
> >> >> [ 145.880419] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
> >> >> [ 145.880422] em28xx #0: card=15 -> V-Gear PocketTV
> >> >> [ 145.880426] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
> >> >> [ 145.880429] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
> >> >> [ 145.880432] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
> >> >> [ 145.880436] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
> >> >> [ 145.880439] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
> >> >> [ 145.880442] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
> >> >> [ 145.880446] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
> >> >> [ 145.880450] em28xx #0: card=23 -> Huaqi DLCW-130
> >> >> [ 145.880453] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
> >> >> [ 145.880456] em28xx #0: card=25 -> Gadmei UTV310
> >> >> [ 145.880459] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
> >> >> [ 145.880462] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
> >> >> [ 145.880466] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
> >> >> [ 145.880470] em28xx #0: card=29 -> <NULL>
> >> >> [ 145.880472] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
> >> >> [ 145.880476] em28xx #0: card=31 -> Usbgear VD204v9
> >> >> [ 145.880479] em28xx #0: card=32 -> Supercomp USB 2.0 TV
> >> >> [ 145.880482] em28xx #0: card=33 -> <NULL>
> >> >> [ 145.880485] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
> >> >> [ 145.880488] em28xx #0: card=35 -> Typhoon DVD Maker
> >> >> [ 145.880492] em28xx #0: card=36 -> NetGMBH Cam
> >> >> [ 145.880495] em28xx #0: card=37 -> Gadmei UTV330
> >> >> [ 145.880498] em28xx #0: card=38 -> Yakumo MovieMixer
> >> >> [ 145.880501] em28xx #0: card=39 -> KWorld PVRTV 300U
> >> >> [ 145.880504] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
> >> >> [ 145.880508] em28xx #0: card=41 -> Kworld 350 U DVB-T
> >> >> [ 145.880511] em28xx #0: card=42 -> Kworld 355 U DVB-T
> >> >> [ 145.880514] em28xx #0: card=43 -> Terratec Cinergy T XS
> >> >> [ 145.880517] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
> >> >> [ 145.880521] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
> >> >> [ 145.880524] em28xx #0: card=46 -> Compro, VideoMate U3
> >> >> [ 145.880528] em28xx #0: card=47 -> KWorld DVB-T 305U
> >> >> [ 145.880531] em28xx #0: card=48 -> KWorld DVB-T 310U
> >> >> [ 145.880534] em28xx #0: card=49 -> MSI DigiVox A/D
> >> >> [ 145.880537] em28xx #0: card=50 -> MSI DigiVox A/D II
> >> >> [ 145.880540] em28xx #0: card=51 -> Terratec Hybrid XS Secam
> >> >> [ 145.880543] em28xx #0: card=52 -> DNT DA2 Hybrid
> >> >> [ 145.880547] em28xx #0: card=53 -> Pinnacle Hybrid Pro
> >> >> [ 145.880550] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
> >> >> [ 145.880554] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
> >> >> [ 145.880557] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
> >> >> [ 145.880560] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
> >> >> [ 145.880564] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
> >> >> [ 145.880567] em28xx #0: card=59 -> <NULL>
> >> >> [ 145.880570] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
> >> >> [ 145.880573] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
> >> >> [ 145.880577] em28xx #0: card=62 -> Gadmei TVR200
> >> >> [ 145.880580] em28xx #0: card=63 -> Kaiomy TVnPC U2
> >> >> [ 145.880583] em28xx #0: card=64 -> Easy Cap Capture DC-60
> >> >> [ 145.880586] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
> >> >> [ 145.880590] em28xx #0: card=66 -> Empire dual TV
> >> >> [ 145.880593] em28xx #0: card=67 -> Terratec Grabby
> >> >> [ 145.880596] em28xx #0: card=68 -> Terratec AV350
> >> >> [ 145.880599] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
> >> >> [ 145.880602] em28xx #0: card=70 -> Evga inDtube
> >> >> [ 145.880605] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
> >> >> [ 145.880716] em28xx #0: Config register raw data: 0x58
> >> >> [ 145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
> >> >> [ 145.890963] em28xx #0: AC97 features = 0x3eb0
> >> >> [ 145.890966] em28xx #0: Unknown AC97 audio processor detected!
> >> >> [ 145.922320] em28xx #0: v4l2 driver version 0.1.2
> >> >> [ 145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
> >> >> [ 146.027706] usbcore: registered new interface driver em28xx
> >> >> [ 146.027787] em28xx driver loaded
> >> >> [ 146.062766] usbcore: registered new interface driver snd-usb-audio
> >> >>
> >> >> This device was working with 2.6.28 together with the out-of-tree
> >> >> driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").
> >> >>
> >> >> What has to be done in order this device can work with the newest Linux kernel?
> >> >>
> >> >> Regards,
> >> >>
> >> >> Márton Németh
> >> >>
> >> >
> >> > never use trees deliberately out-of-tree?
> >>
> >> Maybe I was not clear enough in my description. Currently I am using
> >> 2.6.31-rc7 without any modification. This version contained the message
> >> that I should contact this mailing list (see at 145.880355).
> >>
> >> Regards,
> >>
> >> Márton Németh
> >
> > oooh, good that we have that message now.
> >
> > Then, port all you still can get before he closed his sources?
> >
> > Cheers,
> > Hermann
>
> Hello Németh,
>
> I committed some changes to get this board working a few weeks ago. I
> will check your dmesg output and see if the changes missed the merge
> window. It's possible the changes didn't make it in time for 2.6.31,
> so I will have to check.
>
> Cheers,
>
> Devin
>
Hi Devin,
thanks!
Sorry for disturbing your Sunday.
Does Daniel with that x3m stuff has any chance to get it working with
your latest fixes?
I don't find anything further on the lists and therefore I'm ranting ...
Cheers,
Hermann
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:45 ` hermann pitton
@ 2009-08-24 19:18 ` Devin Heitmueller
0 siblings, 0 replies; 10+ messages in thread
From: Devin Heitmueller @ 2009-08-24 19:18 UTC (permalink / raw)
To: hermann pitton; +Cc: Németh Márton, V4L Mailing List
On Sun, Aug 23, 2009 at 9:45 AM, hermann pitton<hermann-pitton@arcor.de> wrote:
> Hi Devin,
>
> thanks!
>
> Sorry for disturbing your Sunday.
>
> Does Daniel with that x3m stuff has any chance to get it working with
> your latest fixes?
>
> I don't find anything further on the lists and therefore I'm ranting ...
>
> Cheers,
> Hermann
Hello Hermann,
I think you meant to post this onto the other thread.
Regarding Daniel's issue - I would have to see the lspci output to see
if he has the same card.
Probably the fastest approach would be for him to just install the
latest v4l-dvb code and see if it starts working.
Cheers,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-23 13:29 ` Devin Heitmueller
2009-08-23 13:45 ` hermann pitton
@ 2009-08-30 7:18 ` Németh Márton
2009-08-30 14:07 ` Devin Heitmueller
1 sibling, 1 reply; 10+ messages in thread
From: Németh Márton @ 2009-08-30 7:18 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: hermann pitton, V4L Mailing List
Devin Heitmueller wrote:
> I committed some changes to get this board working a few weeks ago. I
> will check your dmesg output and see if the changes missed the merge
> window. It's possible the changes didn't make it in time for 2.6.31,
> so I will have to check.
I tried the following software setup with Pinnacle Hybrid Pro Stick (320e)
(USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.
When I plug the device I still get the following message:
[ 111.681186] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 111.803542] usb 4-3: configuration #1 chosen from 1 choice
[ 112.196629] Linux video capture interface: v2.00
[ 112.376039] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[ 112.377937] em28xx #0: chip ID is em2882/em2883
[ 112.383927] usbcore: registered new interface driver snd-usb-audio
[ 112.460285] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 112.460308] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 112.460326] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 112.460343] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 112.460360] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460377] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460393] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 112.460410] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 112.460426] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 112.460443] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460460] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460476] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460493] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460509] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460526] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[ 112.460543] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 112.460561] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[ 112.460564] em28xx #0: EEPROM info:
[ 112.460567] em28xx #0: AC97 audio (5 sample rates)
[ 112.460570] em28xx #0: USB Remote wakeup capable
[ 112.460573] em28xx #0: 500mA max power
[ 112.460577] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 112.466288] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[ 112.499766] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 112.505263] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[ 112.507760] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[ 112.520001] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 112.520239] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 112.520244] em28xx #0: Please send an email with this log to:
[ 112.520247] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 112.520251] em28xx #0: Board eeprom hash is 0xc49e2420
[ 112.520254] em28xx #0: Board i2c devicelist hash is 0x27e10080
[ 112.520257] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 112.520262] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 112.520266] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 112.520269] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 112.520273] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 112.520276] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 112.520279] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 112.520283] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 112.520286] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 112.520290] em28xx #0: card=8 -> Kworld USB2800
[ 112.520293] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[ 112.520297] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 112.520301] em28xx #0: card=11 -> Terratec Hybrid XS
[ 112.520304] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 112.520308] em28xx #0: card=13 -> Terratec Prodigy XS
[ 112.520311] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[ 112.520315] em28xx #0: card=15 -> V-Gear PocketTV
[ 112.520318] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 112.520322] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 112.520325] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 112.520329] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[ 112.520332] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 112.520336] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 112.520340] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[ 112.520343] em28xx #0: card=23 -> Huaqi DLCW-130
[ 112.520346] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 112.520350] em28xx #0: card=25 -> Gadmei UTV310
[ 112.520353] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 112.520356] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 112.520360] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 112.520364] em28xx #0: card=29 -> <NULL>
[ 112.520367] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 112.520370] em28xx #0: card=31 -> Usbgear VD204v9
[ 112.520374] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 112.520377] em28xx #0: card=33 -> <NULL>
[ 112.520380] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 112.520384] em28xx #0: card=35 -> Typhoon DVD Maker
[ 112.520387] em28xx #0: card=36 -> NetGMBH Cam
[ 112.520390] em28xx #0: card=37 -> Gadmei UTV330
[ 112.520393] em28xx #0: card=38 -> Yakumo MovieMixer
[ 112.520397] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 112.520400] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 112.520403] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 112.520407] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 112.520410] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 112.520413] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 112.520417] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 112.520420] em28xx #0: card=46 -> Compro, VideoMate U3
[ 112.520424] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 112.520427] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 112.520430] em28xx #0: card=49 -> MSI DigiVox A/D
[ 112.520433] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 112.520437] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 112.520440] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 112.520444] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 112.520447] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 112.520450] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 112.520454] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 112.520457] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 112.520461] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 112.520465] em28xx #0: card=59 -> <NULL>
[ 112.520468] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[ 112.520471] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[ 112.520475] em28xx #0: card=62 -> Gadmei TVR200
[ 112.520478] em28xx #0: card=63 -> Kaiomy TVnPC U2
[ 112.520481] em28xx #0: card=64 -> Easy Cap Capture DC-60
[ 112.520485] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[ 112.520488] em28xx #0: card=66 -> Empire dual TV
[ 112.520491] em28xx #0: card=67 -> Terratec Grabby
[ 112.520495] em28xx #0: card=68 -> Terratec AV350
[ 112.520498] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[ 112.520501] em28xx #0: card=70 -> Evga inDtube
[ 112.520505] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[ 112.520760] em28xx #0: Config register raw data: 0x58
[ 112.530630] em28xx #0: AC97 vendor ID = 0x7eb07eb0
[ 112.531000] em28xx #0: AC97 features = 0x7eb0
[ 112.531497] em28xx #0: Unknown AC97 audio processor detected!
[ 112.554574] em28xx #0: v4l2 driver version 0.1.2
[ 112.592340] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 112.598179] usbcore: registered new interface driver em28xx
[ 112.598234] em28xx driver loaded
What should be the next step to get this device working?
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-30 7:18 ` Németh Márton
@ 2009-08-30 14:07 ` Devin Heitmueller
2009-08-30 14:48 ` Németh Márton
0 siblings, 1 reply; 10+ messages in thread
From: Devin Heitmueller @ 2009-08-30 14:07 UTC (permalink / raw)
To: Németh Márton; +Cc: hermann pitton, V4L Mailing List
2009/8/30 Németh Márton <nm127@freemail.hu>:
> Devin Heitmueller wrote:
>> I committed some changes to get this board working a few weeks ago. I
>> will check your dmesg output and see if the changes missed the merge
>> window. It's possible the changes didn't make it in time for 2.6.31,
>> so I will have to check.
>
> I tried the following software setup with Pinnacle Hybrid Pro Stick (320e)
> (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
> http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.
>
> When I plug the device I still get the following message:
>
<snip>
The changes have not gone upstream yet. Mauro wrote some code for a
potential firmware extract script, but it doesn't work yet.
I've been tied up in another project, so I haven't gotten back to it.
I know I keep dragging this out, but given my current workload I
probably won't get the work done for the next couple of weeks.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pinnacle Hybrid Pro Stick (320e)?
2009-08-30 14:07 ` Devin Heitmueller
@ 2009-08-30 14:48 ` Németh Márton
0 siblings, 0 replies; 10+ messages in thread
From: Németh Márton @ 2009-08-30 14:48 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: hermann pitton, V4L Mailing List
Devin Heitmueller worte:
> 2009/8/30 Németh Márton <nm127@freemail.hu>:
>> Devin Heitmueller wrote:
>>> I committed some changes to get this board working a few weeks ago. I
>>> will check your dmesg output and see if the changes missed the merge
>>> window. It's possible the changes didn't make it in time for 2.6.31,
>>> so I will have to check.
>> I tried the following software setup with Pinnacle Hybrid Pro Stick (320e)
>> (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
>> http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.
>>
>> When I plug the device I still get the following message:
>>
> <snip>
>
> The changes have not gone upstream yet. Mauro wrote some code for a
> potential firmware extract script, but it doesn't work yet.
>
> I've been tied up in another project, so I haven't gotten back to it.
> I know I keep dragging this out, but given my current workload I
> probably won't get the work done for the next couple of weeks.
OK, no problem. I just wanted to know whether I can test or try something
myself.
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-08-30 14:48 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-23 12:48 Pinnacle Hybrid Pro Stick (320e)? Németh Márton
2009-08-23 13:06 ` hermann pitton
2009-08-23 13:14 ` Németh Márton
2009-08-23 13:18 ` hermann pitton
2009-08-23 13:29 ` Devin Heitmueller
2009-08-23 13:45 ` hermann pitton
2009-08-24 19:18 ` Devin Heitmueller
2009-08-30 7:18 ` Németh Márton
2009-08-30 14:07 ` Devin Heitmueller
2009-08-30 14:48 ` Németh Márton
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.