* RE: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine @ 2009-09-07 14:00 Mr. Teo En Ming (Zhang Enming) 2009-09-07 14:07 ` Tim Moore 2009-09-07 14:56 ` Mr. Teo En Ming (Zhang Enming) 0 siblings, 2 replies; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 14:00 UTC (permalink / raw) To: xen-devel, bengheng; +Cc: Han, Weidong, 'timothy.moore@expidas.net' OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 14:00 Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 14:07 ` Tim Moore 2009-09-07 14:12 ` Mr. Teo En Ming (Zhang Enming) 2009-09-07 14:56 ` Mr. Teo En Ming (Zhang Enming) 1 sibling, 1 reply; 13+ messages in thread From: Tim Moore @ 2009-09-07 14:07 UTC (permalink / raw) To: 'enming.teo@asiasoftsea.net'; +Cc: xen-devel Hi Teo, Please provide lspci -s 01:00.0 -vv Thanks Tim -----Original Message----- From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 15:00 To: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu Cc: Tim Moore; Han, Weidong Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 14:07 ` Tim Moore @ 2009-09-07 14:12 ` Mr. Teo En Ming (Zhang Enming) 0 siblings, 0 replies; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 14:12 UTC (permalink / raw) To: timothy.moore; +Cc: xen-devel Dear Tim, 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at d000 [size=128] [virtual] Expansion ROM at d3000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia I am using latest nvidia proprietary driver and I compiled the open source kernel interface against my own kernel. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:07 PM, Tim Moore wrote: > Hi Teo, > > Please provide lspci -s 01:00.0 -vv > > Thanks > Tim > > -----Original Message----- > From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] > Sent: 07 September 2009 15:00 > To: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu > Cc: Tim Moore; Han, Weidong > Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine > > OK I have just reached home after work. > > >Teo, > > >Please can you post your > > >1) lspci output from Dom0 for your VGA card > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS > (rev a1) (prog-if 00 [VGA controller]) > > 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) > > >2) qemu log for DomU > > Will post later when I reboot with Serial Console > > >3) xm dmesg output > > Will post later when I reboot with Serial Console > > >4) Modifications you made to vBAR-pBAR patch > > I did not make any modifications to the vbar-pbar patch. I used the 1:1 > map patch as provided by Weidong Intel verbatim. > > >Thanks Tim > > Thank you. > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 14:00 Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Mr. Teo En Ming (Zhang Enming) 2009-09-07 14:07 ` Tim Moore @ 2009-09-07 14:56 ` Mr. Teo En Ming (Zhang Enming) 2009-09-07 15:02 ` Mr. Teo En Ming (Zhang Enming) 1 sibling, 1 reply; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 14:56 UTC (permalink / raw) To: enming.teo Cc: 'timothy.moore@expidas.net', xen-devel, Han, Weidong, bengheng [-- Attachment #1.1: Type: text/plain, Size: 5898 bytes --] Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. _*(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0*_ (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 _*(XEN) HVM1: Make vBAR = pBAR of assigned gfx*_ (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... _*(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...*_ (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: _*(XEN) HVM1: c0000-cf7ff: VGA BIOS*_ (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: > OK I have just reached home after work. > > >Teo, > > >Please can you post your > > >1) lspci output from Dom0 for your VGA card > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS > (rev a1) (prog-if 00 [VGA controller]) > > 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) > > >2) qemu log for DomU > > Will post later when I reboot with Serial Console > > >3) xm dmesg output > > Will post later when I reboot with Serial Console > > >4) Modifications you made to vBAR-pBAR patch > > I did not make any modifications to the vbar-pbar patch. I used the > 1:1 map patch as provided by Weidong Intel verbatim. > > >Thanks Tim > > Thank you. > [-- Attachment #1.2: Type: text/html, Size: 7169 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 14:56 ` Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 15:02 ` Mr. Teo En Ming (Zhang Enming) [not found] ` <14D9C9E2ED61ED41BC3B37ACDF4E880002E0C4B8F676@heavy-vm03.heavy.org.uk> 0 siblings, 1 reply; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 15:02 UTC (permalink / raw) To: enming.teo Cc: 'timothy.moore@expidas.net', xen-devel, Han, Weidong, bengheng [-- Attachment #1.1: Type: text/plain, Size: 6771 bytes --] Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: > Hi, > > Here is my "xm dmesg" output. Important lines have been bolded and > underlined. > > _*(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 > (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0*_ > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 > (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.5-unstable > (XEN) HVM1: CPU speed is 2800 MHz > (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:2 INTD->IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 02:0 INTA->IRQ11 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > _*(XEN) HVM1: Make vBAR = pBAR of assigned gfx*_ > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 > (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 > (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done > (XEN) HVM1: Creating MP tables ... > _*(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...*_ > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc003000-fc01261f > (XEN) HVM1: vm86 TSS at fc012800 > (XEN) HVM1: BIOS map: > _*(XEN) HVM1: c0000-cf7ff: VGA BIOS*_ > (XEN) HVM1: cf800-dbfff: Etherboot ROM > (XEN) HVM1: eb000-eb175: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: IDE time out > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 > (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > > Thank you. > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> OK I have just reached home after work. >> >> >Teo, >> >> >Please can you post your >> >> >1) lspci output from Dom0 for your VGA card >> >> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS >> (rev a1) (prog-if 00 [VGA controller]) >> >> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >> >> >2) qemu log for DomU >> >> Will post later when I reboot with Serial Console >> >> >3) xm dmesg output >> >> Will post later when I reboot with Serial Console >> >> >4) Modifications you made to vBAR-pBAR patch >> >> I did not make any modifications to the vbar-pbar patch. I used the >> 1:1 map patch as provided by Weidong Intel verbatim. >> >> >Thanks Tim >> >> Thank you. >> > > [-- Attachment #1.2: Type: text/html, Size: 8266 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <14D9C9E2ED61ED41BC3B37ACDF4E880002E0C4B8F676@heavy-vm03.heavy.org.uk>]
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine [not found] ` <14D9C9E2ED61ED41BC3B37ACDF4E880002E0C4B8F676@heavy-vm03.heavy.org.uk> @ 2009-09-07 23:54 ` Mr. Teo En Ming (Zhang Enming) 2009-09-08 0:08 ` Mr. Teo En Ming (Zhang Enming) 0 siblings, 1 reply; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-07 23:54 UTC (permalink / raw) To: timothy.moore, xen-devel, Han, Weidong, bengheng [-- Attachment #1.1: Type: text/plain, Size: 7935 bytes --] All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: > > Version 1 still, > > Kernel 2.6.18 or pvops rc6 worked for me - > > *From:* Mr. Teo En Ming (Zhang Enming) > [mailto:enming.teo@asiasoftsea.net] > *Sent:* 07 September 2009 16:03 > *To:* enming.teo@asiasoftsea.net > *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, > Weidong; Tim Moore > *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA > PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine > > > Hi Timothy, > > Are you using the Intel gfx passthrough Version 1 or Version 2 patches? > > I am still using Version 1 patches. > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> > Alma Maters: Singapore Polytechnic, National University of Singapore > > > > On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: > > Hi, > > Here is my "xm dmesg" output. Important lines have been bolded and > underlined. > > *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 > (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 > (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.5-unstable > (XEN) HVM1: CPU speed is 2800 MHz > (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:2 INTD->IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 02:0 INTA->IRQ11 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 > (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 > (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done > (XEN) HVM1: Creating MP tables ... > *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc003000-fc01261f > (XEN) HVM1: vm86 TSS at fc012800 > (XEN) HVM1: BIOS map: > *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* > (XEN) HVM1: cf800-dbfff: Etherboot ROM > (XEN) HVM1: eb000-eb175: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: IDE time out > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 > (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > > Thank you. > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> > Alma Maters: Singapore Polytechnic, National University of Singapore > > > > On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: > > OK I have just reached home after work. > > >Teo, > > >Please can you post your > > >1) lspci output from Dom0 for your VGA card > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS > (rev a1) (prog-if 00 [VGA controller]) > > 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) > > >2) qemu log for DomU > > Will post later when I reboot with Serial Console > > >3) xm dmesg output > > Will post later when I reboot with Serial Console > > >4) Modifications you made to vBAR-pBAR patch > > I did not make any modifications to the vbar-pbar patch. I used the > 1:1 map patch as provided by Weidong Intel verbatim. > > >Thanks Tim > > Thank you. > [-- Attachment #1.2: Type: text/html, Size: 13401 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 23:54 ` Mr. Teo En Ming (Zhang Enming) @ 2009-09-08 0:08 ` Mr. Teo En Ming (Zhang Enming) 2009-09-08 0:46 ` Han, Weidong 0 siblings, 1 reply; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-08 0:08 UTC (permalink / raw) To: enming.teo; +Cc: Han, Weidong, xen-devel, timothy.moore, bengheng [-- Attachment #1.1: Type: text/plain, Size: 8979 bytes --] Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: > All other things being equal, then it must be the differences between > our graphics card. > > What motherboard are you using? > > Can you do a video presentation as well? > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/07/2009 11:45 PM, Tim Moore wrote: >> >> Version 1 still, >> >> Kernel 2.6.18 or pvops rc6 worked for me - >> >> *From:* Mr. Teo En Ming (Zhang Enming) >> [mailto:enming.teo@asiasoftsea.net] >> *Sent:* 07 September 2009 16:03 >> *To:* enming.teo@asiasoftsea.net >> *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, >> Weidong; Tim Moore >> *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA >> PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine >> >> >> Hi Timothy, >> >> Are you using the Intel gfx passthrough Version 1 or Version 2 patches? >> >> I am still using Version 1 patches. >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website:http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> >> On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> >> Hi, >> >> Here is my "xm dmesg" output. Important lines have been bolded and >> underlined. >> >> *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 >> (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 >> (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 >> (XEN) HVM1: HVM Loader >> (XEN) HVM1: Detected Xen v3.5-unstable >> (XEN) HVM1: CPU speed is 2800 MHz >> (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >> (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 >> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >> (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 >> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >> (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >> (XEN) HVM1: pci dev 01:2 INTD->IRQ5 >> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >> (XEN) HVM1: pci dev 02:0 INTA->IRQ11 >> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >> *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >> (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 >> (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 >> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 >> (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 >> (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 >> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 >> (XEN) HVM1: Multiprocessor initialisation: >> (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs >> [3/8] ... done. >> (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs >> [3/8] ... done. >> (XEN) HVM1: Testing HVM environment: >> (XEN) HVM1: - REP INSB across page boundaries ... passed >> (XEN) HVM1: - GS base MSRs and SWAPGS ... passed >> (XEN) HVM1: Passed 2 of 2 tests >> (XEN) HVM1: Writing SMBIOS tables ... >> (XEN) HVM1: Loading ROMBIOS ... >> (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: >> (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done >> (XEN) HVM1: Creating MP tables ... >> *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* >> (XEN) HVM1: Loading PCI Option ROM ... >> (XEN) HVM1: - Manufacturer: http://etherboot.org >> (XEN) HVM1: - Product name: gPXE >> (XEN) HVM1: Loading ACPI ... >> (XEN) HVM1: - Lo data: 000ea020-000ea04f >> (XEN) HVM1: - Hi data: fc003000-fc01261f >> (XEN) HVM1: vm86 TSS at fc012800 >> (XEN) HVM1: BIOS map: >> *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* >> (XEN) HVM1: cf800-dbfff: Etherboot ROM >> (XEN) HVM1: eb000-eb175: SMBIOS tables >> (XEN) HVM1: f0000-fffff: Main BIOS >> (XEN) HVM1: Invoking ROMBIOS ... >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! >> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >> (XEN) HVM1: >> (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 >> (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) >> (XEN) HVM1: IDE time out >> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) HVM1: IDE time out >> (XEN) HVM1: >> (XEN) HVM1: >> (XEN) HVM1: >> (XEN) HVM1: Press F12 for boot menu. >> (XEN) HVM1: >> (XEN) HVM1: Booting from Hard Disk... >> (XEN) HVM1: Booting from 0000:7c00 >> (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 >> nr_mfns=10000 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >> >> Thank you. >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website:http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> >> On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> >> OK I have just reached home after work. >> >> >Teo, >> >> >Please can you post your >> >> >1) lspci output from Dom0 for your VGA card >> >> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS >> (rev a1) (prog-if 00 [VGA controller]) >> >> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >> >> >2) qemu log for DomU >> >> Will post later when I reboot with Serial Console >> >> >3) xm dmesg output >> >> Will post later when I reboot with Serial Console >> >> >4) Modifications you made to vBAR-pBAR patch >> >> I did not make any modifications to the vbar-pbar patch. I used the >> 1:1 map patch as provided by Weidong Intel verbatim. >> >> >Thanks Tim >> >> Thank you. >> > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > [-- Attachment #1.2: Type: text/html, Size: 15046 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-08 0:08 ` Mr. Teo En Ming (Zhang Enming) @ 2009-09-08 0:46 ` Han, Weidong 2009-09-08 0:51 ` Mr. Teo En Ming (Zhang Enming) 0 siblings, 1 reply; 13+ messages in thread From: Han, Weidong @ 2009-09-08 0:46 UTC (permalink / raw) To: 'enming.teo@asiasoftsea.net' Cc: 'xen-devel@lists.xensource.com', 'timothy.moore@expidas.net', 'bengheng@eecs.umich.edu' [-- Attachment #1.1: Type: text/plain, Size: 9309 bytes --] I tried nVidia GeForce 8400 GS on Q35. I didn't see that message. BTW, I cannot access your video URL. Regards, Weidong ________________________________ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net<mailto:enming.teo@asiasoftsea.net> Cc: xen-devel@lists.xensource.com<mailto:xen-devel@lists.xensource.com>; bengheng@eecs.umich.edu<mailto:bengheng@eecs.umich.edu>; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. ________________________________ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com> http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 16291 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-08 0:46 ` Han, Weidong @ 2009-09-08 0:51 ` Mr. Teo En Ming (Zhang Enming) 2009-09-08 2:02 ` Video Presentation on PCI Express x16 VGA PassThroughto " Teo En Ming (Zhang Enming) 2009-09-08 10:57 ` Video Presentation on PCI Express x16 VGA Pass Through to " Teo En Ming (Zhang Enming) 0 siblings, 2 replies; 13+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-08 0:51 UTC (permalink / raw) To: weidong.han Cc: 'xen-devel@lists.xensource.com', 'timothy.moore@expidas.net', 'bengheng@eecs.umich.edu' [-- Attachment #1.1: Type: text/plain, Size: 10977 bytes --] Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote: > I tried nVidia GeForce 8400 GS on Q35. I didn't see that message. BTW, > I cannot access your video URL. > Regards, > Weidong > > ------------------------------------------------------------------------ > *From:* Mr. Teo En Ming (Zhang Enming) > [mailto:enming.teo@asiasoftsea.net] > *Sent:* 2009年9月8日 8:08 > *To:* enming.teo@asiasoftsea.net > *Cc:* timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, > Weidong; bengheng@eecs.umich.edu > *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA > PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine > > Hi Weidong, > > Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB > as well? > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website: http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN: teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: >> All other things being equal, then it must be the differences between >> our graphics card. >> >> What motherboard are you using? >> >> Can you do a video presentation as well? >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website: http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN: teoenming@hotmail.com >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> On 09/07/2009 11:45 PM, Tim Moore wrote: >>> >>> Version 1 still, >>> >>> Kernel 2.6.18 or pvops rc6 worked for me - >>> >>> *From:* Mr. Teo En Ming (Zhang Enming) >>> [mailto:enming.teo@asiasoftsea.net] >>> *Sent:* 07 September 2009 16:03 >>> *To:* enming.teo@asiasoftsea.net >>> *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, >>> Weidong; Tim Moore >>> *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA >>> PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine >>> >>> >>> Hi Timothy, >>> >>> Are you using the Intel gfx passthrough Version 1 or Version 2 patches? >>> >>> I am still using Version 1 patches. >>> >>> -- >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >>> Technical Support Engineer >>> Information Technology Department >>> Asiasoft Online Pte Ltd >>> Tampines Central 1 #04-01 Tampines Plaza >>> Singapore 529541 >>> Republic of Singapore >>> Company Website: http://www.asiasoft.sg/ >>> Mobile: +65-9648-9798 >>> MSN: teoenming@hotmail.com <mailto:teoenming@hotmail.com> >>> Alma Maters: Singapore Polytechnic, National University of Singapore >>> >>> >>> >>> On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: >>> >>> Hi, >>> >>> Here is my "xm dmesg" output. Important lines have been bolded and >>> underlined. >>> >>> *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 >>> (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 >>> (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 >>> (XEN) HVM1: HVM Loader >>> (XEN) HVM1: Detected Xen v3.5-unstable >>> (XEN) HVM1: CPU speed is 2800 MHz >>> (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 >>> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >>> (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 >>> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >>> (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 >>> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >>> (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 >>> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >>> (XEN) HVM1: pci dev 01:2 INTD->IRQ5 >>> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >>> (XEN) HVM1: pci dev 02:0 INTA->IRQ11 >>> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >>> *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >>> (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 >>> (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 >>> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 >>> (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 >>> (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 >>> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 >>> (XEN) HVM1: Multiprocessor initialisation: >>> (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs >>> [3/8] ... done. >>> (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs >>> [3/8] ... done. >>> (XEN) HVM1: Testing HVM environment: >>> (XEN) HVM1: - REP INSB across page boundaries ... passed >>> (XEN) HVM1: - GS base MSRs and SWAPGS ... passed >>> (XEN) HVM1: Passed 2 of 2 tests >>> (XEN) HVM1: Writing SMBIOS tables ... >>> (XEN) HVM1: Loading ROMBIOS ... >>> (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: >>> (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done >>> (XEN) HVM1: Creating MP tables ... >>> *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* >>> (XEN) HVM1: Loading PCI Option ROM ... >>> (XEN) HVM1: - Manufacturer: http://etherboot.org >>> (XEN) HVM1: - Product name: gPXE >>> (XEN) HVM1: Loading ACPI ... >>> (XEN) HVM1: - Lo data: 000ea020-000ea04f >>> (XEN) HVM1: - Hi data: fc003000-fc01261f >>> (XEN) HVM1: vm86 TSS at fc012800 >>> (XEN) HVM1: BIOS map: >>> *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* >>> (XEN) HVM1: cf800-dbfff: Etherboot ROM >>> (XEN) HVM1: eb000-eb175: SMBIOS tables >>> (XEN) HVM1: f0000-fffff: Main BIOS >>> (XEN) HVM1: Invoking ROMBIOS ... >>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>> (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! >>> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >>> (XEN) HVM1: >>> (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 >>> (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) >>> (XEN) HVM1: IDE time out >>> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >>> (XEN) HVM1: IDE time out >>> (XEN) HVM1: >>> (XEN) HVM1: >>> (XEN) HVM1: >>> (XEN) HVM1: Press F12 for boot menu. >>> (XEN) HVM1: >>> (XEN) HVM1: Booting from Hard Disk... >>> (XEN) HVM1: Booting from 0000:7c00 >>> (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 >>> (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 >>> nr_mfns=1000 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 >>> nr_mfns=10000 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 >>> nr_mfns=2000 >>> (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >>> >>> Thank you. >>> >>> -- >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >>> Technical Support Engineer >>> Information Technology Department >>> Asiasoft Online Pte Ltd >>> Tampines Central 1 #04-01 Tampines Plaza >>> Singapore 529541 >>> Republic of Singapore >>> Company Website: http://www.asiasoft.sg/ >>> Mobile: +65-9648-9798 >>> MSN: teoenming@hotmail.com <mailto:teoenming@hotmail.com> >>> Alma Maters: Singapore Polytechnic, National University of Singapore >>> >>> >>> >>> On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >>> >>> OK I have just reached home after work. >>> >>> >Teo, >>> >>> >Please can you post your >>> >>> >1) lspci output from Dom0 for your VGA card >>> >>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 >>> GS (rev a1) (prog-if 00 [VGA controller]) >>> >>> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >>> >>> >2) qemu log for DomU >>> >>> Will post later when I reboot with Serial Console >>> >>> >3) xm dmesg output >>> >>> Will post later when I reboot with Serial Console >>> >>> >4) Modifications you made to vBAR-pBAR patch >>> >>> I did not make any modifications to the vbar-pbar patch. I used the >>> 1:1 map patch as provided by Weidong Intel verbatim. >>> >>> >Thanks Tim >>> >>> Thank you. >>> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > [-- Attachment #1.2: Type: text/html, Size: 18711 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-08 0:51 ` Mr. Teo En Ming (Zhang Enming) @ 2009-09-08 2:02 ` Teo En Ming (Zhang Enming) 2009-09-08 10:57 ` Video Presentation on PCI Express x16 VGA Pass Through to " Teo En Ming (Zhang Enming) 1 sibling, 0 replies; 13+ messages in thread From: Teo En Ming (Zhang Enming) @ 2009-09-08 2:02 UTC (permalink / raw) To: enming.teo, weidong.han; +Cc: xen-devel, timothy.moore, bengheng [-- Attachment #1.1: Type: text/plain, Size: 10705 bytes --] These presentation videos were captured (through firewire) and rendered by me using the open source video editor kdenlive. http://www.kdenlive.org/ Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com _____ From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists. xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Tuesday, September 08, 2009 8:52 AM To: weidong.han@intel.com Cc: 'xen-devel@lists.xensource.com'; 'timothy.moore@expidas.net'; 'bengheng@eecs.umich.edu' Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote: I tried nVidia GeForce 8400 GS on Q35. I didn't see that message. BTW, I cannot access your video URL. Regards, Weidong _____ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net Cc: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 [-- Attachment #1.2: Type: text/html, Size: 36535 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-08 0:51 ` Mr. Teo En Ming (Zhang Enming) 2009-09-08 2:02 ` Video Presentation on PCI Express x16 VGA PassThroughto " Teo En Ming (Zhang Enming) @ 2009-09-08 10:57 ` Teo En Ming (Zhang Enming) 1 sibling, 0 replies; 13+ messages in thread From: Teo En Ming (Zhang Enming) @ 2009-09-08 10:57 UTC (permalink / raw) To: enming.teo, weidong.han; +Cc: xen-devel, timothy.moore, bengheng [-- Attachment #1.1: Type: text/plain, Size: 10609 bytes --] Dear Weidong, Have you managed to watch the videos? Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com _____ From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists. xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Tuesday, September 08, 2009 8:52 AM To: weidong.han@intel.com Cc: 'xen-devel@lists.xensource.com'; 'timothy.moore@expidas.net'; 'bengheng@eecs.umich.edu' Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote: I tried nVidia GeForce 8400 GS on Q35. I didn't see that message. BTW, I cannot access your video URL. Regards, Weidong _____ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net Cc: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 [-- Attachment #1.2: Type: text/html, Size: 36298 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine @ 2009-09-07 9:58 Tim Moore 2009-09-07 10:10 ` Video Presentation on PCI Express x16 VGA PassThrough " Teo En Ming (Zhang Enming) 0 siblings, 1 reply; 13+ messages in thread From: Tim Moore @ 2009-09-07 9:58 UTC (permalink / raw) To: 'enming.teo@asiasoftsea.net'; +Cc: xen-devel Hi Teo, I don't get this message; my VGA (Nvidia Geforce GTX260) does not have the exclamation and the driver load successfully. Have you tried with the extra patch for secondary cycles as I mentioned before? Please look again at my implementation of the patches and try to replicate. BTW, I watched your Videos! Nice Touch ;) Cheers, Tim -----Original Message----- From: Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 10:41 To: enming.teo@asiasoftsea.net; xen-devel@lists.xensource.com Cc: Tim Moore; 'Han,Weidong'; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Is there any way to solve the "There are not enough free resources" problem? Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Monday, September 07, 2009 6:23 AM To: xen-devel@lists.xensource.com Cc: 'timothy.moore@expidas.net'; enming.teo@asiasoftsea.net; Han,Weidong; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Dear All, I have made a two-part video series on VGA pass through using Xen virtualization and Intel VT-d. These are home-made videos so please bear with me :-) Please check out my blog at http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/video-presentation- on-pci-express-x16.html for the two-part videos and additional details. Thank you very much for viewing. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.76/2344 - Release Date: 09/03/09 18:05:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 9:58 Tim Moore @ 2009-09-07 10:10 ` Teo En Ming (Zhang Enming) 2009-09-07 10:12 ` Tim Moore 0 siblings, 1 reply; 13+ messages in thread From: Teo En Ming (Zhang Enming) @ 2009-09-07 10:10 UTC (permalink / raw) To: timothy.moore; +Cc: xen-devel Hi Tim, Yes, I had applied the last and final secondary-gfx-patch to xen 3.5-unstable changeset 20143 but the result is still the same. I cannot solve the "not enough free resources" problem. I am using the latest Intel ACPI CA compiler version 20090730. Wonder if this has any impact. Also I am using xen with pvops dom 0 kernel 2.6.31-rc6. Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Tim Moore Sent: Monday, September 07, 2009 5:58 PM To: 'enming.teo@asiasoftsea.net' Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Teo, I don't get this message; my VGA (Nvidia Geforce GTX260) does not have the exclamation and the driver load successfully. Have you tried with the extra patch for secondary cycles as I mentioned before? Please look again at my implementation of the patches and try to replicate. BTW, I watched your Videos! Nice Touch ;) Cheers, Tim -----Original Message----- From: Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 10:41 To: enming.teo@asiasoftsea.net; xen-devel@lists.xensource.com Cc: Tim Moore; 'Han,Weidong'; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Is there any way to solve the "There are not enough free resources" problem? Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Monday, September 07, 2009 6:23 AM To: xen-devel@lists.xensource.com Cc: 'timothy.moore@expidas.net'; enming.teo@asiasoftsea.net; Han,Weidong; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Dear All, I have made a two-part video series on VGA pass through using Xen virtualization and Intel VT-d. These are home-made videos so please bear with me :-) Please check out my blog at http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/video-presentation- on-pci-express-x16.html for the two-part videos and additional details. Thank you very much for viewing. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.76/2344 - Release Date: 09/03/09 18:05:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine 2009-09-07 10:10 ` Video Presentation on PCI Express x16 VGA PassThrough " Teo En Ming (Zhang Enming) @ 2009-09-07 10:12 ` Tim Moore 0 siblings, 0 replies; 13+ messages in thread From: Tim Moore @ 2009-09-07 10:12 UTC (permalink / raw) To: 'enming.teo@asiasoftsea.net'; +Cc: xen-devel Teo, Please can you post your 1) lspci output from Dom0 for your VGA card 2) qemu log for DomU 3) xm dmesg output 4) Modifications you made to vBAR-pBAR patch Thanks Tim -----Original Message----- From: Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 11:11 To: Tim Moore Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Tim, Yes, I had applied the last and final secondary-gfx-patch to xen 3.5-unstable changeset 20143 but the result is still the same. I cannot solve the "not enough free resources" problem. I am using the latest Intel ACPI CA compiler version 20090730. Wonder if this has any impact. Also I am using xen with pvops dom 0 kernel 2.6.31-rc6. Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Tim Moore Sent: Monday, September 07, 2009 5:58 PM To: 'enming.teo@asiasoftsea.net' Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Teo, I don't get this message; my VGA (Nvidia Geforce GTX260) does not have the exclamation and the driver load successfully. Have you tried with the extra patch for secondary cycles as I mentioned before? Please look again at my implementation of the patches and try to replicate. BTW, I watched your Videos! Nice Touch ;) Cheers, Tim -----Original Message----- From: Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 10:41 To: enming.teo@asiasoftsea.net; xen-devel@lists.xensource.com Cc: Tim Moore; 'Han,Weidong'; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Is there any way to solve the "There are not enough free resources" problem? Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Monday, September 07, 2009 6:23 AM To: xen-devel@lists.xensource.com Cc: 'timothy.moore@expidas.net'; enming.teo@asiasoftsea.net; Han,Weidong; bderzhavets@yahoo.com; djmagee@mageenet.net; bengheng@eecs.umich.edu Subject: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine Dear All, I have made a two-part video series on VGA pass through using Xen virtualization and Intel VT-d. These are home-made videos so please bear with me :-) Please check out my blog at http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/video-presentation- on-pci-express-x16.html for the two-part videos and additional details. Thank you very much for viewing. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.76/2344 - Release Date: 09/03/09 18:05:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2009-09-08 10:57 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-07 14:00 Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Mr. Teo En Ming (Zhang Enming)
2009-09-07 14:07 ` Tim Moore
2009-09-07 14:12 ` Mr. Teo En Ming (Zhang Enming)
2009-09-07 14:56 ` Mr. Teo En Ming (Zhang Enming)
2009-09-07 15:02 ` Mr. Teo En Ming (Zhang Enming)
[not found] ` <14D9C9E2ED61ED41BC3B37ACDF4E880002E0C4B8F676@heavy-vm03.heavy.org.uk>
2009-09-07 23:54 ` Mr. Teo En Ming (Zhang Enming)
2009-09-08 0:08 ` Mr. Teo En Ming (Zhang Enming)
2009-09-08 0:46 ` Han, Weidong
2009-09-08 0:51 ` Mr. Teo En Ming (Zhang Enming)
2009-09-08 2:02 ` Video Presentation on PCI Express x16 VGA PassThroughto " Teo En Ming (Zhang Enming)
2009-09-08 10:57 ` Video Presentation on PCI Express x16 VGA Pass Through to " Teo En Ming (Zhang Enming)
-- strict thread matches above, loose matches on Subject: below --
2009-09-07 9:58 Tim Moore
2009-09-07 10:10 ` Video Presentation on PCI Express x16 VGA PassThrough " Teo En Ming (Zhang Enming)
2009-09-07 10:12 ` Tim Moore
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.