* hanging kernel - HPMC problem
@ 2009-11-03 10:07 Marek Denis
2009-11-03 13:51 ` Carlos O'Donell
0 siblings, 1 reply; 3+ messages in thread
From: Marek Denis @ 2009-11-03 10:07 UTC (permalink / raw)
To: linux-parisc
Hello all,
I am encountering probably quite typical problem with my PA-RISC server.
Unfortunately, I couldn't find any solution on google.
I am trying to configure kernel on HPPA machine with old PA8000 (with
300MHz clock) processor.
I managed to install Debian lenny on that machine, configured most of
the services, owever while trying to recompile the kernel I alwas get
HPMC bus timeout during the boot. Generic kernel works perfectly, would
you give me any hints where should I look for a mistake?
I suppose this is only kernel configuration issue.
Here is the .config file that didn't work:
http://pastebin.com/f45530dd7
I would appreciate any help
Marek Denis
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: hanging kernel - HPMC problem
2009-11-03 10:07 hanging kernel - HPMC problem Marek Denis
@ 2009-11-03 13:51 ` Carlos O'Donell
2009-11-10 1:32 ` Marek Denis
0 siblings, 1 reply; 3+ messages in thread
From: Carlos O'Donell @ 2009-11-03 13:51 UTC (permalink / raw)
To: Marek Denis; +Cc: linux-parisc
On Tue, Nov 3, 2009 at 5:07 AM, Marek Denis <marek@octogan.net> wrote:
> I suppose this is only kernel configuration issue.
> Here is the .config file that didn't work:
> http://pastebin.com/f45530dd7
>
> I would appreciate any help
I suggest:
* Remove all add-on cards from the hardware.
* Start with the generic config.
* Enable one thing at a time until it stops working.
* Come back to the list with a list of config options that don't work.
It's a slow and tedious process, but that's the only "easy" way to
solve the problem.
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: hanging kernel - HPMC problem
2009-11-03 13:51 ` Carlos O'Donell
@ 2009-11-10 1:32 ` Marek Denis
0 siblings, 0 replies; 3+ messages in thread
From: Marek Denis @ 2009-11-10 1:32 UTC (permalink / raw)
To: Carlos O'Donell; +Cc: linux-parisc
Carlos O'Donell pisze:
> I suggest:
> * Remove all add-on cards from the hardware.
> * Start with the generic config.
> * Enable one thing at a time until it stops working.
> * Come back to the list with a list of config options that don't work.
>
> It's a slow and tedious process, but that's the only "easy" way to
> solve the problem.
Actually, the only additional hardware is 2x 3COM network cards.
Unfortunately, after removing them from the server my custom kernel also
hung with 'HPMC bus timeout'.
I will do as you advise, and try to remove one option at once in the
kernel config.
Anyway, thanks for your help.
Marek Denis
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-11-10 1:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-11-03 10:07 hanging kernel - HPMC problem Marek Denis
2009-11-03 13:51 ` Carlos O'Donell
2009-11-10 1:32 ` Marek Denis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.