* [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
@ 2010-03-03 4:50 FUJITA Tomonori
2010-03-03 23:16 ` Randy Dunlap
0 siblings, 1 reply; 4+ messages in thread
From: FUJITA Tomonori @ 2010-03-03 4:50 UTC (permalink / raw)
To: akpm; +Cc: linux-kernel
Seems that you missed the following patch?
http://lkml.org/lkml/2010/2/13/2
This can be fold into dma-mappingh-add-the-dma_unmap-state-api.patch.
Thanks,
=
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Subject: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
Andrew pointed out:
- adding the semicolons at the end of DECLARE_DMA_UNMAP_{ADDR|LEN}
confuses people.
- they are "definitions", not "declarations".
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
Documentation/DMA-API.txt | 8 +++-----
include/linux/dma-mapping.h | 8 ++++----
include/linux/pci-dma.h | 12 ++++++------
3 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index d7d9eef..0fc5728 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -494,7 +494,7 @@ portable API) the following facilities are provided.
Actually, instead of describing the macros one by one, we'll
transform some example code.
-1) Use DECLARE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
Example, before:
struct ring_state {
@@ -507,12 +507,10 @@ transform some example code.
struct ring_state {
struct sk_buff *skb;
- DECLARE_DMA_UNMAP_ADDR(mapping)
- DECLARE_DMA_UNMAP_LEN(len)
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_LEN(len);
};
-NOTE: DO NOT put a semicolon at the end of the DECLARE_*() macro.
-
2) Use dma_unmap_{addr,len}_set to set these values.
Example, before:
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 599d8e4..e00c5c9 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -241,15 +241,15 @@ struct dma_attrs;
#endif /* CONFIG_HAVE_DMA_ATTRS */
#ifdef CONFIG_NEED_DMA_MAP_STATE
-#define DECLARE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
-#define DECLARE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
#define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
#define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else
-#define DECLARE_DMA_MAP_ADDR(ADDR_NAME)
-#define DECLARE_DMA_UNMAP_LEN(LEN_NAME)
+#define DEFINE_DMA_MAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
#define dma_unmap_addr(PTR, ADDR_NAME) (0)
#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define dma_unmap_len(PTR, LEN_NAME) (0)
diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
index 235a61e..549a041 100644
--- a/include/linux/pci-dma.h
+++ b/include/linux/pci-dma.h
@@ -1,11 +1,11 @@
#ifndef _LINUX_PCI_DMA_H
#define _LINUX_PCI_DMA_H
-#define DECLARE_PCI_UNMAP_ADDR DECLARE_DMA_UNMAP_ADDR
-#define DECLARE_PCI_UNMAP_LEN DECLARE_DMA_UNMAP_LEN
-#define pci_unmap_addr dma_unmap_addr
-#define pci_unmap_addr_set dma_unmap_addr_set
-#define pci_unmap_len dma_unmap_len
-#define pci_unmap_len_set dma_unmap_len_set
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
+#define pci_unmap_addr dma_unmap_addr
+#define pci_unmap_addr_set dma_unmap_addr_set
+#define pci_unmap_len dma_unmap_len
+#define pci_unmap_len_set dma_unmap_len_set
#endif
--
1.6.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
2010-03-03 4:50 [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN} FUJITA Tomonori
@ 2010-03-03 23:16 ` Randy Dunlap
2010-03-03 23:28 ` FUJITA Tomonori
0 siblings, 1 reply; 4+ messages in thread
From: Randy Dunlap @ 2010-03-03 23:16 UTC (permalink / raw)
To: FUJITA Tomonori; +Cc: akpm, linux-kernel
On 03/02/10 20:50, FUJITA Tomonori wrote:
> Seems that you missed the following patch?
>
> http://lkml.org/lkml/2010/2/13/2
>
> This can be fold into dma-mappingh-add-the-dma_unmap-state-api.patch.
>
> Thanks,
>
> =
> From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> Subject: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
>
> Andrew pointed out:
>
> - adding the semicolons at the end of DECLARE_DMA_UNMAP_{ADDR|LEN}
> confuses people.
Hm. I'm (still) confused. Why does this patch add semi-colons at the end
of DECLARE_PCI_UNMAP_{ADDR|LEN} below then? (other than it is spelled with
letters "PCI" instead of "DMA")
Thanks.
> - they are "definitions", not "declarations".
>
> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> ---
> Documentation/DMA-API.txt | 8 +++-----
> include/linux/dma-mapping.h | 8 ++++----
> include/linux/pci-dma.h | 12 ++++++------
> 3 files changed, 13 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
> index d7d9eef..0fc5728 100644
> --- a/Documentation/DMA-API.txt
> +++ b/Documentation/DMA-API.txt
> @@ -494,7 +494,7 @@ portable API) the following facilities are provided.
> Actually, instead of describing the macros one by one, we'll
> transform some example code.
>
> -1) Use DECLARE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
> +1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
> Example, before:
>
> struct ring_state {
> @@ -507,12 +507,10 @@ transform some example code.
>
> struct ring_state {
> struct sk_buff *skb;
> - DECLARE_DMA_UNMAP_ADDR(mapping)
> - DECLARE_DMA_UNMAP_LEN(len)
> + DEFINE_DMA_UNMAP_ADDR(mapping);
> + DEFINE_DMA_UNMAP_LEN(len);
> };
>
> -NOTE: DO NOT put a semicolon at the end of the DECLARE_*() macro.
> -
> 2) Use dma_unmap_{addr,len}_set to set these values.
> Example, before:
>
> diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> index 599d8e4..e00c5c9 100644
> --- a/include/linux/dma-mapping.h
> +++ b/include/linux/dma-mapping.h
> @@ -241,15 +241,15 @@ struct dma_attrs;
> #endif /* CONFIG_HAVE_DMA_ATTRS */
>
> #ifdef CONFIG_NEED_DMA_MAP_STATE
> -#define DECLARE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
> -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
> +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
> +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
> #define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
> #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
> #define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
> #define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
> #else
> -#define DECLARE_DMA_MAP_ADDR(ADDR_NAME)
> -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME)
> +#define DEFINE_DMA_MAP_ADDR(ADDR_NAME)
> +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
> #define dma_unmap_addr(PTR, ADDR_NAME) (0)
> #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
> #define dma_unmap_len(PTR, LEN_NAME) (0)
> diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
> index 235a61e..549a041 100644
> --- a/include/linux/pci-dma.h
> +++ b/include/linux/pci-dma.h
> @@ -1,11 +1,11 @@
> #ifndef _LINUX_PCI_DMA_H
> #define _LINUX_PCI_DMA_H
>
> -#define DECLARE_PCI_UNMAP_ADDR DECLARE_DMA_UNMAP_ADDR
> -#define DECLARE_PCI_UNMAP_LEN DECLARE_DMA_UNMAP_LEN
> -#define pci_unmap_addr dma_unmap_addr
> -#define pci_unmap_addr_set dma_unmap_addr_set
> -#define pci_unmap_len dma_unmap_len
> -#define pci_unmap_len_set dma_unmap_len_set
> +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
> +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
> +#define pci_unmap_addr dma_unmap_addr
> +#define pci_unmap_addr_set dma_unmap_addr_set
> +#define pci_unmap_len dma_unmap_len
> +#define pci_unmap_len_set dma_unmap_len_set
>
> #endif
--
~Randy
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
2010-03-03 23:16 ` Randy Dunlap
@ 2010-03-03 23:28 ` FUJITA Tomonori
2010-03-03 23:38 ` Randy Dunlap
0 siblings, 1 reply; 4+ messages in thread
From: FUJITA Tomonori @ 2010-03-03 23:28 UTC (permalink / raw)
To: rdunlap; +Cc: fujita.tomonori, akpm, linux-kernel
On Wed, 03 Mar 2010 15:16:05 -0800
Randy Dunlap <rdunlap@xenotime.net> wrote:
> On 03/02/10 20:50, FUJITA Tomonori wrote:
> > Seems that you missed the following patch?
> >
> > http://lkml.org/lkml/2010/2/13/2
> >
> > This can be fold into dma-mappingh-add-the-dma_unmap-state-api.patch.
> >
> > Thanks,
> >
> > =
> > From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> > Subject: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
> >
> > Andrew pointed out:
> >
> > - adding the semicolons at the end of DECLARE_DMA_UNMAP_{ADDR|LEN}
> > confuses people.
>
> Hm. I'm (still) confused. Why does this patch add semi-colons at the end
> of DECLARE_PCI_UNMAP_{ADDR|LEN} below then? (other than it is spelled with
> letters "PCI" instead of "DMA")
Are you taking about this part, right?
+#define DECLARE_PCI_UNMAP_ADDR (ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
Currently, we have:
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
And PCI-DMA-mapping.txt says:
struct ring_state {
struct sk_buff *skb;
DECLARE_PCI_UNMAP_ADDR(mapping)
DECLARE_PCI_UNMAP_LEN(len)
};
NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
macro.
However, this confuses people. Some drivers already use this macro
with a semicolon like, DECLARE_PCI_UNMAP_ADDR(mapping);
To avoid the above confusion, the new DEFINE_DMA_ macros doesn't have
a semicolon (users need to use a semicolon):
#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
So we need to define DECLARE_PCI_* macro in the following way
(otherwise we break the existing drivers):
#define DECLARE_PCI_UNMAP_ADDR (ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
In the long term, I'll remove DECLARE_PCI_* macros.
> > - they are "definitions", not "declarations".
> >
> > Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> > ---
> > Documentation/DMA-API.txt | 8 +++-----
> > include/linux/dma-mapping.h | 8 ++++----
> > include/linux/pci-dma.h | 12 ++++++------
> > 3 files changed, 13 insertions(+), 15 deletions(-)
> >
> > diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
> > index d7d9eef..0fc5728 100644
> > --- a/Documentation/DMA-API.txt
> > +++ b/Documentation/DMA-API.txt
> > @@ -494,7 +494,7 @@ portable API) the following facilities are provided.
> > Actually, instead of describing the macros one by one, we'll
> > transform some example code.
> >
> > -1) Use DECLARE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
> > +1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
> > Example, before:
> >
> > struct ring_state {
> > @@ -507,12 +507,10 @@ transform some example code.
> >
> > struct ring_state {
> > struct sk_buff *skb;
> > - DECLARE_DMA_UNMAP_ADDR(mapping)
> > - DECLARE_DMA_UNMAP_LEN(len)
> > + DEFINE_DMA_UNMAP_ADDR(mapping);
> > + DEFINE_DMA_UNMAP_LEN(len);
> > };
> >
> > -NOTE: DO NOT put a semicolon at the end of the DECLARE_*() macro.
> > -
> > 2) Use dma_unmap_{addr,len}_set to set these values.
> > Example, before:
> >
> > diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> > index 599d8e4..e00c5c9 100644
> > --- a/include/linux/dma-mapping.h
> > +++ b/include/linux/dma-mapping.h
> > @@ -241,15 +241,15 @@ struct dma_attrs;
> > #endif /* CONFIG_HAVE_DMA_ATTRS */
> >
> > #ifdef CONFIG_NEED_DMA_MAP_STATE
> > -#define DECLARE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
> > -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
> > +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
> > +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
> > #define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
> > #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
> > #define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
> > #define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
> > #else
> > -#define DECLARE_DMA_MAP_ADDR(ADDR_NAME)
> > -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME)
> > +#define DEFINE_DMA_MAP_ADDR(ADDR_NAME)
> > +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
> > #define dma_unmap_addr(PTR, ADDR_NAME) (0)
> > #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
> > #define dma_unmap_len(PTR, LEN_NAME) (0)
> > diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
> > index 235a61e..549a041 100644
> > --- a/include/linux/pci-dma.h
> > +++ b/include/linux/pci-dma.h
> > @@ -1,11 +1,11 @@
> > #ifndef _LINUX_PCI_DMA_H
> > #define _LINUX_PCI_DMA_H
> >
> > -#define DECLARE_PCI_UNMAP_ADDR DECLARE_DMA_UNMAP_ADDR
> > -#define DECLARE_PCI_UNMAP_LEN DECLARE_DMA_UNMAP_LEN
> > -#define pci_unmap_addr dma_unmap_addr
> > -#define pci_unmap_addr_set dma_unmap_addr_set
> > -#define pci_unmap_len dma_unmap_len
> > -#define pci_unmap_len_set dma_unmap_len_set
> > +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
> > +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
> > +#define pci_unmap_addr dma_unmap_addr
> > +#define pci_unmap_addr_set dma_unmap_addr_set
> > +#define pci_unmap_len dma_unmap_len
> > +#define pci_unmap_len_set dma_unmap_len_set
> >
> > #endif
>
>
> --
> ~Randy
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
2010-03-03 23:28 ` FUJITA Tomonori
@ 2010-03-03 23:38 ` Randy Dunlap
0 siblings, 0 replies; 4+ messages in thread
From: Randy Dunlap @ 2010-03-03 23:38 UTC (permalink / raw)
To: FUJITA Tomonori; +Cc: akpm, linux-kernel
On 03/03/10 15:28, FUJITA Tomonori wrote:
> On Wed, 03 Mar 2010 15:16:05 -0800
> Randy Dunlap <rdunlap@xenotime.net> wrote:
>
>> On 03/02/10 20:50, FUJITA Tomonori wrote:
>>> Seems that you missed the following patch?
>>>
>>> http://lkml.org/lkml/2010/2/13/2
>>>
>>> This can be fold into dma-mappingh-add-the-dma_unmap-state-api.patch.
>>>
>>> Thanks,
>>>
>>> =
>>> From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
>>> Subject: [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN}
>>>
>>> Andrew pointed out:
>>>
>>> - adding the semicolons at the end of DECLARE_DMA_UNMAP_{ADDR|LEN}
>>> confuses people.
>>
>> Hm. I'm (still) confused. Why does this patch add semi-colons at the end
>> of DECLARE_PCI_UNMAP_{ADDR|LEN} below then? (other than it is spelled with
>> letters "PCI" instead of "DMA")
>
> Are you taking about this part, right?
Yes.
> +#define DECLARE_PCI_UNMAP_ADDR (ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
> +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
>
> Currently, we have:
>
> #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
>
> And PCI-DMA-mapping.txt says:
>
> struct ring_state {
> struct sk_buff *skb;
> DECLARE_PCI_UNMAP_ADDR(mapping)
> DECLARE_PCI_UNMAP_LEN(len)
> };
>
> NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
> macro.
Argh. That is just wrong.
Thanks for cleaning it all up.
> However, this confuses people. Some drivers already use this macro
> with a semicolon like, DECLARE_PCI_UNMAP_ADDR(mapping);
>
> To avoid the above confusion, the new DEFINE_DMA_ macros doesn't have
> a semicolon (users need to use a semicolon):
>
> #define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
> #define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
>
> So we need to define DECLARE_PCI_* macro in the following way
> (otherwise we break the existing drivers):
>
> #define DECLARE_PCI_UNMAP_ADDR (ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
> #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
>
>
> In the long term, I'll remove DECLARE_PCI_* macros.
I see. That's good, although I don't quite see the problem with doing
it all at once.
>>> - they are "definitions", not "declarations".
>>>
>>> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
>>> ---
>>> Documentation/DMA-API.txt | 8 +++-----
>>> include/linux/dma-mapping.h | 8 ++++----
>>> include/linux/pci-dma.h | 12 ++++++------
>>> 3 files changed, 13 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
>>> index d7d9eef..0fc5728 100644
>>> --- a/Documentation/DMA-API.txt
>>> +++ b/Documentation/DMA-API.txt
>>> @@ -494,7 +494,7 @@ portable API) the following facilities are provided.
>>> Actually, instead of describing the macros one by one, we'll
>>> transform some example code.
>>>
>>> -1) Use DECLARE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
>>> +1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
>>> Example, before:
>>>
>>> struct ring_state {
>>> @@ -507,12 +507,10 @@ transform some example code.
>>>
>>> struct ring_state {
>>> struct sk_buff *skb;
>>> - DECLARE_DMA_UNMAP_ADDR(mapping)
>>> - DECLARE_DMA_UNMAP_LEN(len)
>>> + DEFINE_DMA_UNMAP_ADDR(mapping);
>>> + DEFINE_DMA_UNMAP_LEN(len);
>>> };
>>>
>>> -NOTE: DO NOT put a semicolon at the end of the DECLARE_*() macro.
>>> -
>>> 2) Use dma_unmap_{addr,len}_set to set these values.
>>> Example, before:
>>>
>>> diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
>>> index 599d8e4..e00c5c9 100644
>>> --- a/include/linux/dma-mapping.h
>>> +++ b/include/linux/dma-mapping.h
>>> @@ -241,15 +241,15 @@ struct dma_attrs;
>>> #endif /* CONFIG_HAVE_DMA_ATTRS */
>>>
>>> #ifdef CONFIG_NEED_DMA_MAP_STATE
>>> -#define DECLARE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
>>> -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
>>> +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
>>> +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
>>> #define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
>>> #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
>>> #define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
>>> #define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
>>> #else
>>> -#define DECLARE_DMA_MAP_ADDR(ADDR_NAME)
>>> -#define DECLARE_DMA_UNMAP_LEN(LEN_NAME)
>>> +#define DEFINE_DMA_MAP_ADDR(ADDR_NAME)
>>> +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
>>> #define dma_unmap_addr(PTR, ADDR_NAME) (0)
>>> #define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
>>> #define dma_unmap_len(PTR, LEN_NAME) (0)
>>> diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
>>> index 235a61e..549a041 100644
>>> --- a/include/linux/pci-dma.h
>>> +++ b/include/linux/pci-dma.h
>>> @@ -1,11 +1,11 @@
>>> #ifndef _LINUX_PCI_DMA_H
>>> #define _LINUX_PCI_DMA_H
>>>
>>> -#define DECLARE_PCI_UNMAP_ADDR DECLARE_DMA_UNMAP_ADDR
>>> -#define DECLARE_PCI_UNMAP_LEN DECLARE_DMA_UNMAP_LEN
>>> -#define pci_unmap_addr dma_unmap_addr
>>> -#define pci_unmap_addr_set dma_unmap_addr_set
>>> -#define pci_unmap_len dma_unmap_len
>>> -#define pci_unmap_len_set dma_unmap_len_set
>>> +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
>>> +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) DEFINE_DMA_UNMAP_LEN(LEN_NAME);
>>> +#define pci_unmap_addr dma_unmap_addr
>>> +#define pci_unmap_addr_set dma_unmap_addr_set
>>> +#define pci_unmap_len dma_unmap_len
>>> +#define pci_unmap_len_set dma_unmap_len_set
>>>
>>> #endif
--
~Randy
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-03-03 23:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-03-03 4:50 [PATCH -mm] replace DECLARE_DMA_UNMAP_ADD_{ADDR,LEN} with DEFINE_DMA_UNMAP_ADD_{ADDR,LEN} FUJITA Tomonori
2010-03-03 23:16 ` Randy Dunlap
2010-03-03 23:28 ` FUJITA Tomonori
2010-03-03 23:38 ` Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.