[U-Boot] [PATCH 2/2] arm, i.mx27: add support for magnesium board from LogicPD

[U-Boot] [PATCH 2/2] arm, i.mx27: add support for magnesium board from LogicPD

[Heiko Schocher]

This patch adds support for the magnesium board from LogicPD.
This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND
flash, FEC ethernet controller integrated into i.MX27.

Signed-off-by: Heiko Schocher <hs@denx.de>
---
against current git://git.denx.de/u-boot-imx.git

 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/logicpd/imx27lite/imx27lite.c |   19 +++
 include/configs/magnesium.h         |  260 +++++++++++++++++++++++++++++++++++
 5 files changed, 287 insertions(+), 0 deletions(-)
 create mode 100644 include/configs/magnesium.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d6f78de..a381ec4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -724,6 +724,10 @@ Jens Scharsig <esw@bus-elektronik.de>

 	eb_cpux9k2	ARM920T (AT91RM9200 SoC)

+Heiko Schocher <hs@denx.de>
+
+	magnesium	i.MX27
+
 Robert Schwebel <r.schwebel@pengutronix.de>

 	csb226		xscale
diff --git a/MAKEALL b/MAKEALL
index 6e432ba..2b39d91 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -565,6 +565,7 @@ LIST_ARM9="			\
 	edb9315a		\
 	imx27lite		\
 	lpd7a400		\
+	magnesium		\
 	mv88f6281gtw_ge		\
 	mx1ads			\
 	mx1fs2			\
diff --git a/Makefile b/Makefile
index ee5b896..7c68115 100644
--- a/Makefile
+++ b/Makefile
@@ -2966,6 +2966,9 @@ lpd7a400_config \
 lpd7a404_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x

+magnesium_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
+
 mv88f6281gtw_ge_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood

diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
index 63375d5..0c7041a 100644
--- a/board/logicpd/imx27lite/imx27lite.c
+++ b/board/logicpd/imx27lite/imx27lite.c
@@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init (void)
 {
 	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+#if defined(CONFIG_MAGNESIUM)
+	struct system_control_regs *sc_regs =
+		(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+#endif

 	gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -43,9 +47,20 @@ int board_init (void)
 				&regs->port[PORTC].dr);
 #endif
 #ifdef CONFIG_MXC_MMC
+#if defined(CONFIG_MAGNESIUM)
+	mx27_sd1_init_pins();
+#else
 	mx27_sd2_init_pins();
 #endif
+#endif

+#if defined(CONFIG_MAGNESIUM)
+	/*
+	 * set in FMCR NF_FMS Bit(5) to 1
+	 * (NAND Flash with 2 Kbyte page size)
+	 */
+	writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
+#endif
 	return 0;
 }

@@ -68,6 +83,10 @@ int dram_init (void)

 int checkboard(void)
 {
+#if defined(CONFIG_MAGNESIUM)
+	printf("LogicPD magnesium\n");
+#else
 	printf("LogicPD imx27lite\n");
+#endif
 	return 0;
 }
diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
new file mode 100644
index 0000000..555278a
--- /dev/null
+++ b/include/configs/magnesium.h
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based from:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#define CONFIG_MX27
+#define CONFIG_MAGNESIUM
+#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_HOSTNAME		magnesium
+
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Lowlevel configuration
+ */
+#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
+		(ESDCFG_TRC(10) |	\
+		ESDCFG_TRCD(3) |	\
+		ESDCFG_TCAS(cas) |	\
+		ESDCFG_TRRD(1) |	\
+		ESDCFG_TRAS(5) |	\
+		ESDCFG_TWR |		\
+		ESDCFG_TMRD(2) |	\
+		ESDCFG_TRP(2) |		\
+		ESDCFG_TXP(3))
+
+#define SDRAM_ESDCTL_REGISTER_VAL	\
+		(ESDCTL_PRCT(0) |	\
+		 ESDCTL_BL |		\
+		 ESDCTL_PWDT(0) |	\
+		 ESDCTL_SREFR(3) |	\
+		 ESDCTL_DSIZ_32 |	\
+		 ESDCTL_COL10 |		\
+		 ESDCTL_ROW13 |		\
+		 ESDCTL_SDE)
+
+#define SDRAM_ALL_VAL		0xf00
+
+#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
+#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
+
+#define MPCTL0_VAL	0x1ef15d5
+
+#define SPCTL0_VAL	0x043a1c09
+
+#define CSCR_VAL	0x33f08107
+
+#define PCDR0_VAL	0x120470c3
+#define PCDR1_VAL	0x03030303
+#define PCCR0_VAL	0xffffffff
+#define PCCR1_VAL	0xfffffffc
+
+#define AIPI1_PSR0_VAL	0x20040304
+#define AIPI1_PSR1_VAL	0xdffbfcfb
+#define AIPI2_PSR0_VAL	0x07ffc200
+#define AIPI2_PSR1_VAL	0xffffffff
+
+/*
+ * Memory Info
+ */
+/* malloc() len */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
+/* reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+/* memtest start address */
+#define CONFIG_SYS_MEMTEST_START	0xA0000000
+#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE	(256 * 1024)	/* regular stack */
+#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX27_UART1
+#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
+#define CONFIG_BAUDRATE		115200		/* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION		1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ	0x8000	/* 64KB sect size */
+/* end of flash */
+#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - 0x40000)
+/* CS2 Base address */
+#define PHYS_FLASH_1			0xc0000000
+/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+/* Flash size 2MB */
+#define PHYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
+		CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
+#define CONFIG_ENV_SECT_SIZE		0x20000		/* Env sector Size */
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR		0x1f
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * MTD
+ */
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0xd8000000
+#define CONFIG_JFFS2_NAND
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_MXC_MCI_REGS_BASE	0x10013000
+#define CONFIG_DOS_PARTITION
+
+/*
+ * MTD partitions
+ */
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=mxc_nand.0"
+#define MTDPARTS_DEFAULT			\
+	"mtdparts="				\
+		"physmap-flash.0:"		\
+			"256k(U-Boot),"		\
+			"7680k(user),"		\
+			"128k(env1),"		\
+			"128k(env2);"		\
+		"mxc_nand.0:"			\
+			"128k(IPL-SPL),"	\
+			"4m(kernel),"		\
+			"22m(rootfs),"		\
+			"-(userfs)"
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
+		sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttymxc0,${baudrate}\0"			\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addmisc=setenv bootargs ${bootargs}\0"				\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"kernel_addr_r=a0800000\0"					\
+	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm\0"						\
+	"bootcmd=run net_nfs\0"						\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
+		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
+		" +${filesize};cp.b ${fileaddr} "			\
+		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
+	"upd=run load update\0"						\
+	"mtdids=" MTDIDS_DEFAULT "\0"					\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+
+#endif /* __CONFIG_H */
-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 2/2] arm, i.mx27: add support for magnesium board from LogicPD

[Stefano Babic]

Heiko Schocher wrote:
> This patch adds support for the magnesium board from LogicPD.
> This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND
> flash, FEC ethernet controller integrated into i.MX27.
> 

Heiko,

I have only a little comment.

>  int checkboard(void)
>  {
> +#if defined(CONFIG_MAGNESIUM)
> +	printf("LogicPD magnesium\n");

I think we can use puts here instead printf.

> +#else
>  	printf("LogicPD imx27lite\n");
> +#endif
>  	return 0;
>  }

It is a pity to add a nasty ifdef only to print out the name of the
board. What do you think if we put the board name in the config file
with a CONFIG_ option (the same for imx27lite.h, of course), removing
the #ifdef ?

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 2/2] arm, i.mx27: add support for magnesium board from LogicPD

[Wolfgang Denk]

Dear Heiko Schocher,

In message <4B8F5D65.4070405@denx.de> you wrote:
> This patch adds support for the magnesium board from LogicPD.
> This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND
> flash, FEC ethernet controller integrated into i.MX27.

The magnesium board is NOT developed by nor manufactured by LogicPD.

> 
> +magnesium_config:	unconfig
> +	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27

Do we need a separate make target? Can we not add this to the
imx27lite target, as you share the code anyway?

> diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
> index 63375d5..0c7041a 100644
> --- a/board/logicpd/imx27lite/imx27lite.c
> +++ b/board/logicpd/imx27lite/imx27lite.c
> @@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR;
>  int board_init (void)
>  {
>  	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
> +#if defined(CONFIG_MAGNESIUM)
> +	struct system_control_regs *sc_regs =
> +		(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
> +#endif

See below.

>  	gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
>  	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> @@ -43,9 +47,20 @@ int board_init (void)
>  				&regs->port[PORTC].dr);
>  #endif
>  #ifdef CONFIG_MXC_MMC
> +#if defined(CONFIG_MAGNESIUM)
> +	mx27_sd1_init_pins();
> +#else
>  	mx27_sd2_init_pins();
>  #endif
> +#endif

This is actually note a feature that depends on the board name, right?
See below.

> +#if defined(CONFIG_MAGNESIUM)
> +	/*
> +	 * set in FMCR NF_FMS Bit(5) to 1
> +	 * (NAND Flash with 2 Kbyte page size)
> +	 */
> +	writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
> +#endif

Same here. Other boards that might reuse this code might or might not
wan this,too. To avoid long listes of "#if defined(BOARD_THIS) ||
defined(BOARD_THAT) || defined(BOARD_OTHER) || .." we should introduce
a feature specific #define here - if it's really needed.

In this specific case, CONFIG_SYS_NAND_LARGEPAGE might do the job?


> @@ -68,6 +83,10 @@ int dram_init (void)
> 
>  int checkboard(void)
>  {
> +#if defined(CONFIG_MAGNESIUM)
> +	printf("LogicPD magnesium\n");
> +#else
>  	printf("LogicPD imx27lite\n");
> +#endif
>  	return 0;

As Stefano already mentioned: don't add sich an #ifdef here. Define
the board name in the board config file instead (and switch to using a
puts()).

> diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
> new file mode 100644
> index 0000000..555278a
> --- /dev/null
> +++ b/include/configs/magnesium.h
> @@ -0,0 +1,260 @@
> +/*
> + * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
> + *
> + * based from:

"based on" or "derived from".


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only person who always got his work done by Friday
                                                 was Robinson Crusoe.

[U-Boot] [PATCH 2/2 v2] arm, i.mx27: add support for magnesium board from projectiondesign

[Heiko Schocher]

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>

---

against current git://git.denx.de/u-boot-imx.git

changes since v1:
- added comment from Stefano Babic
  - use puts instead printf in checkboard()
- added comments from Wolfgang Denk
  - just one single make target
  - use CONFIG_SYS_NAND_LARGEPAGE for setting
    FMCR NF_FMS Bit, and not the board name.
  - spelling check
- collected common config options in
  include/configs/imx27lite-common.h
- added CONFIG_DISPLAY_BOARDINFO
- deleted CONFIG_BOOTFILE, because
  bootfile is also defined in
  CONFIG_EXTRA_ENV_SETTINGS

 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    1 +
 board/logicpd/imx27lite/imx27lite.c |   18 +++-
 include/configs/imx27lite-common.h  |  237 +++++++++++++++++++++++++++++++++++
 include/configs/imx27lite.h         |  200 +-----------------------------
 include/configs/magnesium.h         |   71 +++++++++++
 7 files changed, 335 insertions(+), 197 deletions(-)
 create mode 100644 include/configs/imx27lite-common.h
 create mode 100644 include/configs/magnesium.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d6f78de..a381ec4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -724,6 +724,10 @@ Jens Scharsig <esw@bus-elektronik.de>

 	eb_cpux9k2	ARM920T (AT91RM9200 SoC)

+Heiko Schocher <hs@denx.de>
+
+	magnesium	i.MX27
+
 Robert Schwebel <r.schwebel@pengutronix.de>

 	csb226		xscale
diff --git a/MAKEALL b/MAKEALL
index 6e432ba..2b39d91 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -565,6 +565,7 @@ LIST_ARM9="			\
 	edb9315a		\
 	imx27lite		\
 	lpd7a400		\
+	magnesium		\
 	mv88f6281gtw_ge		\
 	mx1ads			\
 	mx1fs2			\
diff --git a/Makefile b/Makefile
index ee5b896..ebf0e76 100644
--- a/Makefile
+++ b/Makefile
@@ -2959,6 +2959,7 @@ davinci_dm365evm_config :	unconfig
 davinci_dm6467evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci

+magnesium_config	\
 imx27lite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27

diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
index 63375d5..4427415 100644
--- a/board/logicpd/imx27lite/imx27lite.c
+++ b/board/logicpd/imx27lite/imx27lite.c
@@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init (void)
 {
 	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+	struct system_control_regs *sc_regs =
+		(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+#endif

 	gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -43,9 +47,20 @@ int board_init (void)
 				&regs->port[PORTC].dr);
 #endif
 #ifdef CONFIG_MXC_MMC
+#if defined(CONFIG_MAGNESIUM)
+	mx27_sd1_init_pins();
+#else
 	mx27_sd2_init_pins();
 #endif
+#endif

+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+	/*
+	 * set in FMCR NF_FMS Bit(5) to 1
+	 * (NAND Flash with 2 Kbyte page size)
+	 */
+	writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
+#endif
 	return 0;
 }

@@ -68,6 +83,7 @@ int dram_init (void)

 int checkboard(void)
 {
-	printf("LogicPD imx27lite\n");
+	puts ("Board: ");
+	puts(CONFIG_BOARDNAME);
 	return 0;
 }
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
new file mode 100644
index 0000000..1da8602
--- /dev/null
+++ b/include/configs/imx27lite-common.h
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMX27LITE_COMMON_CONFIG_H
+#define __IMX27LITE_COMMON_CONFIG_H
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#define CONFIG_MX27
+#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Lowlevel configuration
+ */
+#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
+		(ESDCFG_TRC(10) |	\
+		ESDCFG_TRCD(3) |	\
+		ESDCFG_TCAS(cas) |	\
+		ESDCFG_TRRD(1) |	\
+		ESDCFG_TRAS(5) |	\
+		ESDCFG_TWR |		\
+		ESDCFG_TMRD(2) |	\
+		ESDCFG_TRP(2) |		\
+		ESDCFG_TXP(3))
+
+#define SDRAM_ESDCTL_REGISTER_VAL	\
+		(ESDCTL_PRCT(0) |	\
+		 ESDCTL_BL |		\
+		 ESDCTL_PWDT(0) |	\
+		 ESDCTL_SREFR(3) |	\
+		 ESDCTL_DSIZ_32 |	\
+		 ESDCTL_COL10 |		\
+		 ESDCTL_ROW13 |		\
+		 ESDCTL_SDE)
+
+#define SDRAM_ALL_VAL		0xf00
+
+#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
+#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
+
+#define MPCTL0_VAL	0x1ef15d5
+
+#define SPCTL0_VAL	0x043a1c09
+
+#define CSCR_VAL	0x33f08107
+
+#define PCDR0_VAL	0x120470c3
+#define PCDR1_VAL	0x03030303
+#define PCCR0_VAL	0xffffffff
+#define PCCR1_VAL	0xfffffffc
+
+#define AIPI1_PSR0_VAL	0x20040304
+#define AIPI1_PSR1_VAL	0xdffbfcfb
+#define AIPI2_PSR0_VAL	0x07ffc200
+#define AIPI2_PSR1_VAL	0xffffffff
+
+/*
+ * Memory Info
+ */
+/* malloc() len */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
+/* reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+/* memtest start address */
+#define CONFIG_SYS_MEMTEST_START	0xA0000000
+#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE	(256 * 1024)	/* regular stack */
+#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX27_UART1
+#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
+#define CONFIG_BAUDRATE		115200		/* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION		1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
+/* CS2 Base address */
+#define PHYS_FLASH_1			0xc0000000
+/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
+		CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR		0x1f
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * MTD
+ */
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0xd8000000
+#define CONFIG_JFFS2_NAND
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * MTD partitions
+ */
+#define CONFIG_CMD_MTDPARTS
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
+		sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttymxc0,${baudrate}\0"			\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addmisc=setenv bootargs ${bootargs}\0"				\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"kernel_addr_r=a0800000\0"					\
+	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm\0"						\
+	"bootcmd=run net_nfs\0"					\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
+		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
+		" +${filesize};cp.b ${fileaddr} "			\
+		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
+	"upd=run load update\0"						\
+	"mtdids=" MTDIDS_DEFAULT "\0"					\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+
+#endif /* __IMX27LITE_COMMON_CONFIG_H */
diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h
index ee749ec..72f6e80 100644
--- a/include/configs/imx27lite.h
+++ b/include/configs/imx27lite.h
@@ -20,158 +20,31 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H

+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
 /*
  * SoC Configuration
  */
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_MX27
 #define CONFIG_IMX27LITE
-#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
-#define CONFIG_SYS_HZ		1000
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
-		(ESDCFG_TRC(10) |	\
-		ESDCFG_TRCD(3) |	\
-		ESDCFG_TCAS(cas) |	\
-		ESDCFG_TRRD(1) |	\
-		ESDCFG_TRAS(5) |	\
-		ESDCFG_TWR |		\
-		ESDCFG_TMRD(2) |	\
-		ESDCFG_TRP(2) |		\
-		ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL	\
-		(ESDCTL_PRCT(0) |	\
-		 ESDCTL_BL |		\
-		 ESDCTL_PWDT(0) |	\
-		 ESDCTL_SREFR(3) |	\
-		 ESDCTL_DSIZ_32 |	\
-		 ESDCTL_COL10 |		\
-		 ESDCTL_ROW13 |		\
-		 ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL		0xf00
-
-#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
-
-#define MPCTL0_VAL	0x1ef15d5
-
-#define SPCTL0_VAL	0x043a1c09
-
-#define CSCR_VAL	0x33f08107
-
-#define PCDR0_VAL	0x120470c3
-#define PCDR1_VAL	0x03030303
-#define PCCR0_VAL	0xffffffff
-#define PCCR1_VAL	0xfffffffc
-
-#define AIPI1_PSR0_VAL	0x20040304
-#define AIPI1_PSR1_VAL	0xdffbfcfb
-#define AIPI2_PSR0_VAL	0x07ffc200
-#define AIPI2_PSR1_VAL	0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
-/* reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-/* memtest start address */
-#define CONFIG_SYS_MEMTEST_START	0xA0000000
-#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256 * 1024)	/* regular stack */
-#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_HOSTNAME		imx27
+#define CONFIG_BOARDNAME	"LogicPD imx27lite\n"

 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-/* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION		1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ	0x2000	/* 8KB sect size Intel Flash */
-/* end of flash */
 #define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - 0x20000)
-/* CS2 Base address */
-#define PHYS_FLASH_1			0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-/* Flash size 2MB */
 #define PHYS_FLASH_SIZE			0x200000
-#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
-		CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
 #define CONFIG_ENV_SECT_SIZE		0x10000		/* Env sector Size */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR		0x1f
-#define CONFIG_MII
-#define CONFIG_NET_MULTI
-
-/*
- * MTD
- */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-
-/*
- * NAND
- */
-#define CONFIG_NAND_MXC
-#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */

 /*
  * SD/MMC
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
-#define CONFIG_DOS_PARTITION

 /*
  * MTD partitions
  */
-#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=mxc_nand.0"
 #define MTDPARTS_DEFAULT			\
 	"mtdparts="				\
@@ -186,69 +59,4 @@
 			"22m(rootfs),"		\
 			"-(userfs)"

-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-		sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define xstr(s)	str(s)
-#define str(s)	#s
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=imx27/u-boot.bin\0"					\
-	"kernel_addr_r=a0800000\0"					\
-	"hostname=imx27\0"						\
-	"bootfile=imx27/uImage\0"					\
-	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm\0"						\
-	"bootcmd=run net_nfs\0"					\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
-		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
-		" +${filesize};cp.b ${fileaddr} "			\
-		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
-	"upd=run load update\0"						\
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
new file mode 100644
index 0000000..4fb7744
--- /dev/null
+++ b/include/configs/magnesium.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MAGNESIUM
+#define CONFIG_HOSTNAME		magnesium
+#define CONFIG_BOARDNAME	"Projectiondesign magnesium\n"
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_SYS_FLASH_SECT_SZ	0x8000	/* 64KB sect size */
+#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - 0x40000)
+#define PHYS_FLASH_SIZE			0x800000
+#define CONFIG_ENV_SECT_SIZE		0x20000		/* Env sector Size */
+
+/*
+ * NAND
+ */
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MXC_MCI_REGS_BASE	0x10013000
+
+/*
+ * MTD partitions
+ */
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=mxc_nand.0"
+#define MTDPARTS_DEFAULT			\
+	"mtdparts="				\
+		"physmap-flash.0:"		\
+			"256k(U-Boot),"		\
+			"7680k(user),"		\
+			"128k(env1),"		\
+			"128k(env2);"		\
+		"mxc_nand.0:"			\
+			"128k(IPL-SPL),"	\
+			"4m(kernel),"		\
+			"22m(rootfs),"		\
+			"-(userfs)"
+
+#endif /* __CONFIG_H */
-- 
1.6.2.5
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 2/2 v2] arm, i.mx27: add support for magnesium board from projectiondesign

[Stefano Babic]

Heiko Schocher wrote:
> This patch adds support for the magnesium board from
> projectiondesign. This board uses i.MX27 SoC and has
> 8MB NOR flash, 128MB NAND flash, FEC ethernet controller
> integrated into i.MX27. As this port is based on
> the imx27lite port, common config options are collected
> in include/configs/imx27lite-common.h
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> 
> ---
> 
> against current git://git.denx.de/u-boot-imx.git
> 
> changes since v1:
> - added comment from Stefano Babic
>   - use puts instead printf in checkboard()
> - added comments from Wolfgang Denk
>   - just one single make target
>   - use CONFIG_SYS_NAND_LARGEPAGE for setting
>     FMCR NF_FMS Bit, and not the board name.
>   - spelling check
> - collected common config options in
>   include/configs/imx27lite-common.h
> - added CONFIG_DISPLAY_BOARDINFO
> - deleted CONFIG_BOOTFILE, because
>   bootfile is also defined in
>   CONFIG_EXTRA_ENV_SETTINGS
> 
>  MAINTAINERS                         |    4 +
>  MAKEALL                             |    1 +
>  Makefile                            |    1 +
>  board/logicpd/imx27lite/imx27lite.c |   18 +++-
>  include/configs/imx27lite-common.h  |  237 +++++++++++++++++++++++++++++++++++
>  include/configs/imx27lite.h         |  200 +-----------------------------
>  include/configs/magnesium.h         |   71 +++++++++++
>  7 files changed, 335 insertions(+), 197 deletions(-)
>  create mode 100644 include/configs/imx27lite-common.h
>  create mode 100644 include/configs/magnesium.h
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================