* [PATCH v3] perf: Split out arch specific code & improve PowerPC perf probe support
@ 2010-04-15 3:57 ` Ian Munsie
0 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev; +Cc: benh, Masami Hiramatsu, Heiko Carstens
These patches add the required mappings to use perf probe on PowerPC.
Part 1 of the patch series moves the arch dependent x86 32 and 64 bit DWARF
register number mappings out into a separate arch directory and adds the
necessary Makefile foo to use it.
Part 2 of the patch series adds the PowerPC mappings -
Functionality wise it requires the patch titled "powerpc: Add kprobe-based
event tracer" from the powerpc-next tree to provide the
HAVE_REGS_AND_STACK_ACCESS_API required for CONFIG_KPROBE_EVENT. The code will
still compile cleanly without it and will fail gracefully at runtime on the
missing CONFIG_KPROBE_EVENT support as before as well as printing a warning
message during compilation.
Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
altogether if the architecture specific Makefile does not define
PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
architecture. A message indicating this is printed out during compilation.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] perf: Split out arch specific code & improve PowerPC perf probe support
@ 2010-04-15 3:57 ` Ian Munsie
0 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev; +Cc: Heiko Carstens, Masami Hiramatsu
These patches add the required mappings to use perf probe on PowerPC.
Part 1 of the patch series moves the arch dependent x86 32 and 64 bit DWARF
register number mappings out into a separate arch directory and adds the
necessary Makefile foo to use it.
Part 2 of the patch series adds the PowerPC mappings -
Functionality wise it requires the patch titled "powerpc: Add kprobe-based
event tracer" from the powerpc-next tree to provide the
HAVE_REGS_AND_STACK_ACCESS_API required for CONFIG_KPROBE_EVENT. The code will
still compile cleanly without it and will fail gracefully at runtime on the
missing CONFIG_KPROBE_EVENT support as before as well as printing a warning
message during compilation.
Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
altogether if the architecture specific Makefile does not define
PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
architecture. A message indicating this is printed out during compilation.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] perf: Move arch specific code into separate arch directory
2010-04-15 3:57 ` Ian Munsie
@ 2010-04-15 3:57 ` Ian Munsie
-1 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev
Cc: benh, Masami Hiramatsu, Heiko Carstens, Ian Munsie,
Peter Zijlstra, Paul Mackerras, Ingo Molnar,
Arnaldo Carvalho de Melo, Frederic Weisbecker
From: Ian Munsie <imunsie@au.ibm.com>
The perf userspace tool included some architecture specific code to map
registers from the DWARF register number into the names used by the regs
and stack access API.
This patch moves the architecture specific code out into a separate
arch/x86 directory along with the infrastructure required to use it.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
---
Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
altogether if the architecture specific Makefile does not define
PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
architecture. A message indicating this is printed out during compilation.
tools/perf/Makefile | 26 ++++++++++-
tools/perf/arch/x86/Makefile | 2 +
tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++++++++++
tools/perf/util/include/dwarf-regs.h | 8 ++++
tools/perf/util/probe-finder.c | 55 +-----------------------
5 files changed, 110 insertions(+), 56 deletions(-)
create mode 100644 tools/perf/arch/x86/Makefile
create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c
create mode 100644 tools/perf/util/include/dwarf-regs.h
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 57b3569..269d5dd 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ -e s/sa110/arm/ \
+ -e s/s390x/s390/ -e s/parisc64/parisc/ \
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh[234].*/sh/ )
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+ ARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+ ARCH := x86
+endif
+
# CFLAGS and LDFLAGS are for the users to override from the command line.
#
@@ -285,7 +299,7 @@ endif
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS = -Iutil/include
+BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
BASIC_LDFLAGS =
# Guard against environment variables
@@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h
LIB_H += util/include/asm/swab.h
LIB_H += util/include/asm/system.h
LIB_H += util/include/asm/uaccess.h
+LIB_H += util/include/dwarf-regs.h
LIB_H += perf.h
LIB_H += util/cache.h
LIB_H += util/callchain.h
@@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE)
-include config.mak.autogen
-include config.mak
+-include arch/$(ARCH)/Makefile
ifeq ($(uname_S),Darwin)
ifndef NO_FINK
@@ -521,12 +537,16 @@ endif
ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev);
else
+ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+ msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+else
ifndef NO_DWARF
BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
EXTLIBS += -lelf -ldw
LIB_OBJS += $(OUTPUT)util/probe-finder.o
-endif
-endif
+endif # NO_DWARF
+endif # PERF_HAVE_DWARF_REGS
+endif # Dwarf support
ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile
new file mode 100644
index 0000000..cbd7833
--- /dev/null
+++ b/tools/perf/arch/x86/Makefile
@@ -0,0 +1,2 @@
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c
new file mode 100644
index 0000000..a794d30
--- /dev/null
+++ b/tools/perf/arch/x86/util/dwarf-regs.c
@@ -0,0 +1,75 @@
+/*
+ * dwarf-regs.c : Mapping of DWARF debug register numbers into register names.
+ * Extracted from probe-finder.c
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+/*
+ * Generic dwarf analysis helpers
+ */
+
+#define X86_32_MAX_REGS 8
+const char *x86_32_regs_table[X86_32_MAX_REGS] = {
+ "%ax",
+ "%cx",
+ "%dx",
+ "%bx",
+ "$stack", /* Stack address instead of %sp */
+ "%bp",
+ "%si",
+ "%di",
+};
+
+#define X86_64_MAX_REGS 16
+const char *x86_64_regs_table[X86_64_MAX_REGS] = {
+ "%ax",
+ "%dx",
+ "%cx",
+ "%bx",
+ "%si",
+ "%di",
+ "%bp",
+ "%sp",
+ "%r8",
+ "%r9",
+ "%r10",
+ "%r11",
+ "%r12",
+ "%r13",
+ "%r14",
+ "%r15",
+};
+
+/* TODO: switching by dwarf address size */
+#ifdef __x86_64__
+#define ARCH_MAX_REGS X86_64_MAX_REGS
+#define arch_regs_table x86_64_regs_table
+#else
+#define ARCH_MAX_REGS X86_32_MAX_REGS
+#define arch_regs_table x86_32_regs_table
+#endif
+
+/* Return architecture dependent register string (for kprobe-tracer) */
+const char *get_arch_regstr(unsigned int n)
+{
+ return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
+}
diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h
new file mode 100644
index 0000000..cf6727e
--- /dev/null
+++ b/tools/perf/util/include/dwarf-regs.h
@@ -0,0 +1,8 @@
+#ifndef _PERF_DWARF_REGS_H_
+#define _PERF_DWARF_REGS_H_
+
+#ifdef DWARF_SUPPORT
+const char *get_arch_regstr(unsigned int n);
+#endif
+
+#endif
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index a851377..83e5bd8 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -31,6 +31,7 @@
#include <string.h>
#include <stdarg.h>
#include <ctype.h>
+#include <dwarf-regs.h>
#include "string.h"
#include "event.h"
@@ -38,58 +39,6 @@
#include "util.h"
#include "probe-finder.h"
-
-/*
- * Generic dwarf analysis helpers
- */
-
-#define X86_32_MAX_REGS 8
-const char *x86_32_regs_table[X86_32_MAX_REGS] = {
- "%ax",
- "%cx",
- "%dx",
- "%bx",
- "$stack", /* Stack address instead of %sp */
- "%bp",
- "%si",
- "%di",
-};
-
-#define X86_64_MAX_REGS 16
-const char *x86_64_regs_table[X86_64_MAX_REGS] = {
- "%ax",
- "%dx",
- "%cx",
- "%bx",
- "%si",
- "%di",
- "%bp",
- "%sp",
- "%r8",
- "%r9",
- "%r10",
- "%r11",
- "%r12",
- "%r13",
- "%r14",
- "%r15",
-};
-
-/* TODO: switching by dwarf address size */
-#ifdef __x86_64__
-#define ARCH_MAX_REGS X86_64_MAX_REGS
-#define arch_regs_table x86_64_regs_table
-#else
-#define ARCH_MAX_REGS X86_32_MAX_REGS
-#define arch_regs_table x86_32_regs_table
-#endif
-
-/* Return architecture dependent register string (for kprobe-tracer) */
-static const char *get_arch_regstr(unsigned int n)
-{
- return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
-}
-
/*
* Compare the tail of two strings.
* Return 0 if whole of either string is same as another's tail part.
@@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf)
regs = get_arch_regstr(regn);
if (!regs)
- die("%u exceeds max register number.", regn);
+ die("Mapping for DWARF register number %u missing on this architecture.", regn);
tvar->value = xstrdup(regs);
if (ref) {
--
1.7.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] perf: Move arch specific code into separate arch directory
@ 2010-04-15 3:57 ` Ian Munsie
0 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev
Cc: Peter Zijlstra, Heiko Carstens, Arnaldo Carvalho de Melo,
Paul Mackerras, Ian Munsie, Frederic Weisbecker, Ingo Molnar,
Masami Hiramatsu
From: Ian Munsie <imunsie@au.ibm.com>
The perf userspace tool included some architecture specific code to map
registers from the DWARF register number into the names used by the regs
and stack access API.
This patch moves the architecture specific code out into a separate
arch/x86 directory along with the infrastructure required to use it.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
---
Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
altogether if the architecture specific Makefile does not define
PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
architecture. A message indicating this is printed out during compilation.
tools/perf/Makefile | 26 ++++++++++-
tools/perf/arch/x86/Makefile | 2 +
tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++++++++++
tools/perf/util/include/dwarf-regs.h | 8 ++++
tools/perf/util/probe-finder.c | 55 +-----------------------
5 files changed, 110 insertions(+), 56 deletions(-)
create mode 100644 tools/perf/arch/x86/Makefile
create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c
create mode 100644 tools/perf/util/include/dwarf-regs.h
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 57b3569..269d5dd 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ -e s/sa110/arm/ \
+ -e s/s390x/s390/ -e s/parisc64/parisc/ \
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh[234].*/sh/ )
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+ ARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+ ARCH := x86
+endif
+
# CFLAGS and LDFLAGS are for the users to override from the command line.
#
@@ -285,7 +299,7 @@ endif
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS = -Iutil/include
+BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
BASIC_LDFLAGS =
# Guard against environment variables
@@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h
LIB_H += util/include/asm/swab.h
LIB_H += util/include/asm/system.h
LIB_H += util/include/asm/uaccess.h
+LIB_H += util/include/dwarf-regs.h
LIB_H += perf.h
LIB_H += util/cache.h
LIB_H += util/callchain.h
@@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE)
-include config.mak.autogen
-include config.mak
+-include arch/$(ARCH)/Makefile
ifeq ($(uname_S),Darwin)
ifndef NO_FINK
@@ -521,12 +537,16 @@ endif
ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev);
else
+ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+ msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+else
ifndef NO_DWARF
BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
EXTLIBS += -lelf -ldw
LIB_OBJS += $(OUTPUT)util/probe-finder.o
-endif
-endif
+endif # NO_DWARF
+endif # PERF_HAVE_DWARF_REGS
+endif # Dwarf support
ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile
new file mode 100644
index 0000000..cbd7833
--- /dev/null
+++ b/tools/perf/arch/x86/Makefile
@@ -0,0 +1,2 @@
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c
new file mode 100644
index 0000000..a794d30
--- /dev/null
+++ b/tools/perf/arch/x86/util/dwarf-regs.c
@@ -0,0 +1,75 @@
+/*
+ * dwarf-regs.c : Mapping of DWARF debug register numbers into register names.
+ * Extracted from probe-finder.c
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+/*
+ * Generic dwarf analysis helpers
+ */
+
+#define X86_32_MAX_REGS 8
+const char *x86_32_regs_table[X86_32_MAX_REGS] = {
+ "%ax",
+ "%cx",
+ "%dx",
+ "%bx",
+ "$stack", /* Stack address instead of %sp */
+ "%bp",
+ "%si",
+ "%di",
+};
+
+#define X86_64_MAX_REGS 16
+const char *x86_64_regs_table[X86_64_MAX_REGS] = {
+ "%ax",
+ "%dx",
+ "%cx",
+ "%bx",
+ "%si",
+ "%di",
+ "%bp",
+ "%sp",
+ "%r8",
+ "%r9",
+ "%r10",
+ "%r11",
+ "%r12",
+ "%r13",
+ "%r14",
+ "%r15",
+};
+
+/* TODO: switching by dwarf address size */
+#ifdef __x86_64__
+#define ARCH_MAX_REGS X86_64_MAX_REGS
+#define arch_regs_table x86_64_regs_table
+#else
+#define ARCH_MAX_REGS X86_32_MAX_REGS
+#define arch_regs_table x86_32_regs_table
+#endif
+
+/* Return architecture dependent register string (for kprobe-tracer) */
+const char *get_arch_regstr(unsigned int n)
+{
+ return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
+}
diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h
new file mode 100644
index 0000000..cf6727e
--- /dev/null
+++ b/tools/perf/util/include/dwarf-regs.h
@@ -0,0 +1,8 @@
+#ifndef _PERF_DWARF_REGS_H_
+#define _PERF_DWARF_REGS_H_
+
+#ifdef DWARF_SUPPORT
+const char *get_arch_regstr(unsigned int n);
+#endif
+
+#endif
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index a851377..83e5bd8 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -31,6 +31,7 @@
#include <string.h>
#include <stdarg.h>
#include <ctype.h>
+#include <dwarf-regs.h>
#include "string.h"
#include "event.h"
@@ -38,58 +39,6 @@
#include "util.h"
#include "probe-finder.h"
-
-/*
- * Generic dwarf analysis helpers
- */
-
-#define X86_32_MAX_REGS 8
-const char *x86_32_regs_table[X86_32_MAX_REGS] = {
- "%ax",
- "%cx",
- "%dx",
- "%bx",
- "$stack", /* Stack address instead of %sp */
- "%bp",
- "%si",
- "%di",
-};
-
-#define X86_64_MAX_REGS 16
-const char *x86_64_regs_table[X86_64_MAX_REGS] = {
- "%ax",
- "%dx",
- "%cx",
- "%bx",
- "%si",
- "%di",
- "%bp",
- "%sp",
- "%r8",
- "%r9",
- "%r10",
- "%r11",
- "%r12",
- "%r13",
- "%r14",
- "%r15",
-};
-
-/* TODO: switching by dwarf address size */
-#ifdef __x86_64__
-#define ARCH_MAX_REGS X86_64_MAX_REGS
-#define arch_regs_table x86_64_regs_table
-#else
-#define ARCH_MAX_REGS X86_32_MAX_REGS
-#define arch_regs_table x86_32_regs_table
-#endif
-
-/* Return architecture dependent register string (for kprobe-tracer) */
-static const char *get_arch_regstr(unsigned int n)
-{
- return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
-}
-
/*
* Compare the tail of two strings.
* Return 0 if whole of either string is same as another's tail part.
@@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf)
regs = get_arch_regstr(regn);
if (!regs)
- die("%u exceeds max register number.", regn);
+ die("Mapping for DWARF register number %u missing on this architecture.", regn);
tvar->value = xstrdup(regs);
if (ref) {
--
1.7.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 2/2] perf probe: Add PowerPC DWARF register number mappings
2010-04-15 3:57 ` Ian Munsie
@ 2010-04-15 3:57 ` Ian Munsie
-1 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev
Cc: benh, Masami Hiramatsu, Heiko Carstens, Ian Munsie,
Peter Zijlstra, Paul Mackerras, Ingo Molnar,
Arnaldo Carvalho de Melo
From: Ian Munsie <imunsie@au.ibm.com>
This patch adds mappings from the register numbers from DWARF to the
register names used in the PowerPC Regs and Stack Access API. This
allows perf probe to be used to record variable contents on PowerPC.
This patch depends on functionality in the powerpc/next tree, though it
will compile fine without it. Specifically this patch depends on commit
"powerpc: Add kprobe-based event tracer"
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
---
tools/perf/arch/powerpc/Makefile | 2 +
tools/perf/arch/powerpc/util/dwarf-regs.c | 88 +++++++++++++++++++++++++++++
2 files changed, 90 insertions(+), 0 deletions(-)
create mode 100644 tools/perf/arch/powerpc/Makefile
create mode 100644 tools/perf/arch/powerpc/util/dwarf-regs.c
diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile
new file mode 100644
index 0000000..cbd7833
--- /dev/null
+++ b/tools/perf/arch/powerpc/Makefile
@@ -0,0 +1,2 @@
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
diff --git a/tools/perf/arch/powerpc/util/dwarf-regs.c b/tools/perf/arch/powerpc/util/dwarf-regs.c
new file mode 100644
index 0000000..48ae0c5
--- /dev/null
+++ b/tools/perf/arch/powerpc/util/dwarf-regs.c
@@ -0,0 +1,88 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 Ian Munsie, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+
+struct pt_regs_dwarfnum {
+ const char *name;
+ unsigned int dwarfnum;
+};
+
+#define STR(s) #s
+#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
+#define GPR_DWARFNUM_NAME(num) \
+ {.name = STR(%gpr##num), .dwarfnum = num}
+#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
+
+/*
+ * Reference:
+ * http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html
+ */
+static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
+ GPR_DWARFNUM_NAME(0),
+ GPR_DWARFNUM_NAME(1),
+ GPR_DWARFNUM_NAME(2),
+ GPR_DWARFNUM_NAME(3),
+ GPR_DWARFNUM_NAME(4),
+ GPR_DWARFNUM_NAME(5),
+ GPR_DWARFNUM_NAME(6),
+ GPR_DWARFNUM_NAME(7),
+ GPR_DWARFNUM_NAME(8),
+ GPR_DWARFNUM_NAME(9),
+ GPR_DWARFNUM_NAME(10),
+ GPR_DWARFNUM_NAME(11),
+ GPR_DWARFNUM_NAME(12),
+ GPR_DWARFNUM_NAME(13),
+ GPR_DWARFNUM_NAME(14),
+ GPR_DWARFNUM_NAME(15),
+ GPR_DWARFNUM_NAME(16),
+ GPR_DWARFNUM_NAME(17),
+ GPR_DWARFNUM_NAME(18),
+ GPR_DWARFNUM_NAME(19),
+ GPR_DWARFNUM_NAME(20),
+ GPR_DWARFNUM_NAME(21),
+ GPR_DWARFNUM_NAME(22),
+ GPR_DWARFNUM_NAME(23),
+ GPR_DWARFNUM_NAME(24),
+ GPR_DWARFNUM_NAME(25),
+ GPR_DWARFNUM_NAME(26),
+ GPR_DWARFNUM_NAME(27),
+ GPR_DWARFNUM_NAME(28),
+ GPR_DWARFNUM_NAME(29),
+ GPR_DWARFNUM_NAME(30),
+ GPR_DWARFNUM_NAME(31),
+ REG_DWARFNUM_NAME("%msr", 66),
+ REG_DWARFNUM_NAME("%ctr", 109),
+ REG_DWARFNUM_NAME("%link", 108),
+ REG_DWARFNUM_NAME("%xer", 101),
+ REG_DWARFNUM_NAME("%dar", 119),
+ REG_DWARFNUM_NAME("%dsisr", 118),
+ REG_DWARFNUM_END,
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n: the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+ const struct pt_regs_dwarfnum *roff;
+ for (roff = regdwarfnum_table; roff->name != NULL; roff++)
+ if (roff->dwarfnum == n)
+ return roff->name;
+ return NULL;
+}
--
1.7.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 2/2] perf probe: Add PowerPC DWARF register number mappings
@ 2010-04-15 3:57 ` Ian Munsie
0 siblings, 0 replies; 10+ messages in thread
From: Ian Munsie @ 2010-04-15 3:57 UTC (permalink / raw)
To: linux-kernel, linuxppc-dev
Cc: Peter Zijlstra, Heiko Carstens, Arnaldo Carvalho de Melo,
Paul Mackerras, Ian Munsie, Ingo Molnar, Masami Hiramatsu
From: Ian Munsie <imunsie@au.ibm.com>
This patch adds mappings from the register numbers from DWARF to the
register names used in the PowerPC Regs and Stack Access API. This
allows perf probe to be used to record variable contents on PowerPC.
This patch depends on functionality in the powerpc/next tree, though it
will compile fine without it. Specifically this patch depends on commit
"powerpc: Add kprobe-based event tracer"
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
---
tools/perf/arch/powerpc/Makefile | 2 +
tools/perf/arch/powerpc/util/dwarf-regs.c | 88 +++++++++++++++++++++++++++++
2 files changed, 90 insertions(+), 0 deletions(-)
create mode 100644 tools/perf/arch/powerpc/Makefile
create mode 100644 tools/perf/arch/powerpc/util/dwarf-regs.c
diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile
new file mode 100644
index 0000000..cbd7833
--- /dev/null
+++ b/tools/perf/arch/powerpc/Makefile
@@ -0,0 +1,2 @@
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
diff --git a/tools/perf/arch/powerpc/util/dwarf-regs.c b/tools/perf/arch/powerpc/util/dwarf-regs.c
new file mode 100644
index 0000000..48ae0c5
--- /dev/null
+++ b/tools/perf/arch/powerpc/util/dwarf-regs.c
@@ -0,0 +1,88 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 Ian Munsie, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+
+struct pt_regs_dwarfnum {
+ const char *name;
+ unsigned int dwarfnum;
+};
+
+#define STR(s) #s
+#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
+#define GPR_DWARFNUM_NAME(num) \
+ {.name = STR(%gpr##num), .dwarfnum = num}
+#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
+
+/*
+ * Reference:
+ * http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html
+ */
+static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
+ GPR_DWARFNUM_NAME(0),
+ GPR_DWARFNUM_NAME(1),
+ GPR_DWARFNUM_NAME(2),
+ GPR_DWARFNUM_NAME(3),
+ GPR_DWARFNUM_NAME(4),
+ GPR_DWARFNUM_NAME(5),
+ GPR_DWARFNUM_NAME(6),
+ GPR_DWARFNUM_NAME(7),
+ GPR_DWARFNUM_NAME(8),
+ GPR_DWARFNUM_NAME(9),
+ GPR_DWARFNUM_NAME(10),
+ GPR_DWARFNUM_NAME(11),
+ GPR_DWARFNUM_NAME(12),
+ GPR_DWARFNUM_NAME(13),
+ GPR_DWARFNUM_NAME(14),
+ GPR_DWARFNUM_NAME(15),
+ GPR_DWARFNUM_NAME(16),
+ GPR_DWARFNUM_NAME(17),
+ GPR_DWARFNUM_NAME(18),
+ GPR_DWARFNUM_NAME(19),
+ GPR_DWARFNUM_NAME(20),
+ GPR_DWARFNUM_NAME(21),
+ GPR_DWARFNUM_NAME(22),
+ GPR_DWARFNUM_NAME(23),
+ GPR_DWARFNUM_NAME(24),
+ GPR_DWARFNUM_NAME(25),
+ GPR_DWARFNUM_NAME(26),
+ GPR_DWARFNUM_NAME(27),
+ GPR_DWARFNUM_NAME(28),
+ GPR_DWARFNUM_NAME(29),
+ GPR_DWARFNUM_NAME(30),
+ GPR_DWARFNUM_NAME(31),
+ REG_DWARFNUM_NAME("%msr", 66),
+ REG_DWARFNUM_NAME("%ctr", 109),
+ REG_DWARFNUM_NAME("%link", 108),
+ REG_DWARFNUM_NAME("%xer", 101),
+ REG_DWARFNUM_NAME("%dar", 119),
+ REG_DWARFNUM_NAME("%dsisr", 118),
+ REG_DWARFNUM_END,
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n: the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+ const struct pt_regs_dwarfnum *roff;
+ for (roff = regdwarfnum_table; roff->name != NULL; roff++)
+ if (roff->dwarfnum == n)
+ return roff->name;
+ return NULL;
+}
--
1.7.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] perf: Move arch specific code into separate arch directory
2010-04-15 3:57 ` Ian Munsie
@ 2010-04-15 15:19 ` Masami Hiramatsu
-1 siblings, 0 replies; 10+ messages in thread
From: Masami Hiramatsu @ 2010-04-15 15:19 UTC (permalink / raw)
To: Ian Munsie
Cc: linux-kernel, linuxppc-dev, benh, Heiko Carstens, Peter Zijlstra,
Paul Mackerras, Ingo Molnar, Arnaldo Carvalho de Melo,
Frederic Weisbecker
Ian Munsie wrote:
> From: Ian Munsie <imunsie@au.ibm.com>
>
> The perf userspace tool included some architecture specific code to map
> registers from the DWARF register number into the names used by the regs
> and stack access API.
>
> This patch moves the architecture specific code out into a separate
> arch/x86 directory along with the infrastructure required to use it.
>
> Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Good work!
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Thank you very much!
> ---
> Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
> altogether if the architecture specific Makefile does not define
> PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
> architecture. A message indicating this is printed out during compilation.
>
> tools/perf/Makefile | 26 ++++++++++-
> tools/perf/arch/x86/Makefile | 2 +
> tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++++++++++
> tools/perf/util/include/dwarf-regs.h | 8 ++++
> tools/perf/util/probe-finder.c | 55 +-----------------------
> 5 files changed, 110 insertions(+), 56 deletions(-)
> create mode 100644 tools/perf/arch/x86/Makefile
> create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c
> create mode 100644 tools/perf/util/include/dwarf-regs.h
>
> diff --git a/tools/perf/Makefile b/tools/perf/Makefile
> index 57b3569..269d5dd 100644
> --- a/tools/perf/Makefile
> +++ b/tools/perf/Makefile
> @@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
> uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
> uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
>
> +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
> + -e s/arm.*/arm/ -e s/sa110/arm/ \
> + -e s/s390x/s390/ -e s/parisc64/parisc/ \
> + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
> + -e s/sh[234].*/sh/ )
> +
> +# Additional ARCH settings for x86
> +ifeq ($(ARCH),i386)
> + ARCH := x86
> +endif
> +ifeq ($(ARCH),x86_64)
> + ARCH := x86
> +endif
> +
> # CFLAGS and LDFLAGS are for the users to override from the command line.
>
> #
> @@ -285,7 +299,7 @@ endif
> # Those must not be GNU-specific; they are shared with perl/ which may
> # be built by a different compiler. (Note that this is an artifact now
> # but it still might be nice to keep that distinction.)
> -BASIC_CFLAGS = -Iutil/include
> +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
> BASIC_LDFLAGS =
>
> # Guard against environment variables
> @@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h
> LIB_H += util/include/asm/swab.h
> LIB_H += util/include/asm/system.h
> LIB_H += util/include/asm/uaccess.h
> +LIB_H += util/include/dwarf-regs.h
> LIB_H += perf.h
> LIB_H += util/cache.h
> LIB_H += util/callchain.h
> @@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE)
>
> -include config.mak.autogen
> -include config.mak
> +-include arch/$(ARCH)/Makefile
>
> ifeq ($(uname_S),Darwin)
> ifndef NO_FINK
> @@ -521,12 +537,16 @@ endif
> ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
> msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev);
> else
> +ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
> + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
> +else
> ifndef NO_DWARF
> BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
> EXTLIBS += -lelf -ldw
> LIB_OBJS += $(OUTPUT)util/probe-finder.o
> -endif
> -endif
> +endif # NO_DWARF
> +endif # PERF_HAVE_DWARF_REGS
> +endif # Dwarf support
>
> ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
> msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
> diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile
> new file mode 100644
> index 0000000..cbd7833
> --- /dev/null
> +++ b/tools/perf/arch/x86/Makefile
> @@ -0,0 +1,2 @@
> +PERF_HAVE_DWARF_REGS := 1
> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
> diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c
> new file mode 100644
> index 0000000..a794d30
> --- /dev/null
> +++ b/tools/perf/arch/x86/util/dwarf-regs.c
> @@ -0,0 +1,75 @@
> +/*
> + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names.
> + * Extracted from probe-finder.c
> + *
> + * Written by Masami Hiramatsu <mhiramat@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + *
> + */
> +
> +#include <libio.h>
> +#include <dwarf-regs.h>
> +
> +/*
> + * Generic dwarf analysis helpers
> + */
> +
> +#define X86_32_MAX_REGS 8
> +const char *x86_32_regs_table[X86_32_MAX_REGS] = {
> + "%ax",
> + "%cx",
> + "%dx",
> + "%bx",
> + "$stack", /* Stack address instead of %sp */
> + "%bp",
> + "%si",
> + "%di",
> +};
> +
> +#define X86_64_MAX_REGS 16
> +const char *x86_64_regs_table[X86_64_MAX_REGS] = {
> + "%ax",
> + "%dx",
> + "%cx",
> + "%bx",
> + "%si",
> + "%di",
> + "%bp",
> + "%sp",
> + "%r8",
> + "%r9",
> + "%r10",
> + "%r11",
> + "%r12",
> + "%r13",
> + "%r14",
> + "%r15",
> +};
> +
> +/* TODO: switching by dwarf address size */
> +#ifdef __x86_64__
> +#define ARCH_MAX_REGS X86_64_MAX_REGS
> +#define arch_regs_table x86_64_regs_table
> +#else
> +#define ARCH_MAX_REGS X86_32_MAX_REGS
> +#define arch_regs_table x86_32_regs_table
> +#endif
> +
> +/* Return architecture dependent register string (for kprobe-tracer) */
> +const char *get_arch_regstr(unsigned int n)
> +{
> + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
> +}
> diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h
> new file mode 100644
> index 0000000..cf6727e
> --- /dev/null
> +++ b/tools/perf/util/include/dwarf-regs.h
> @@ -0,0 +1,8 @@
> +#ifndef _PERF_DWARF_REGS_H_
> +#define _PERF_DWARF_REGS_H_
> +
> +#ifdef DWARF_SUPPORT
> +const char *get_arch_regstr(unsigned int n);
> +#endif
> +
> +#endif
> diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
> index a851377..83e5bd8 100644
> --- a/tools/perf/util/probe-finder.c
> +++ b/tools/perf/util/probe-finder.c
> @@ -31,6 +31,7 @@
> #include <string.h>
> #include <stdarg.h>
> #include <ctype.h>
> +#include <dwarf-regs.h>
>
> #include "string.h"
> #include "event.h"
> @@ -38,58 +39,6 @@
> #include "util.h"
> #include "probe-finder.h"
>
> -
> -/*
> - * Generic dwarf analysis helpers
> - */
> -
> -#define X86_32_MAX_REGS 8
> -const char *x86_32_regs_table[X86_32_MAX_REGS] = {
> - "%ax",
> - "%cx",
> - "%dx",
> - "%bx",
> - "$stack", /* Stack address instead of %sp */
> - "%bp",
> - "%si",
> - "%di",
> -};
> -
> -#define X86_64_MAX_REGS 16
> -const char *x86_64_regs_table[X86_64_MAX_REGS] = {
> - "%ax",
> - "%dx",
> - "%cx",
> - "%bx",
> - "%si",
> - "%di",
> - "%bp",
> - "%sp",
> - "%r8",
> - "%r9",
> - "%r10",
> - "%r11",
> - "%r12",
> - "%r13",
> - "%r14",
> - "%r15",
> -};
> -
> -/* TODO: switching by dwarf address size */
> -#ifdef __x86_64__
> -#define ARCH_MAX_REGS X86_64_MAX_REGS
> -#define arch_regs_table x86_64_regs_table
> -#else
> -#define ARCH_MAX_REGS X86_32_MAX_REGS
> -#define arch_regs_table x86_32_regs_table
> -#endif
> -
> -/* Return architecture dependent register string (for kprobe-tracer) */
> -static const char *get_arch_regstr(unsigned int n)
> -{
> - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
> -}
> -
> /*
> * Compare the tail of two strings.
> * Return 0 if whole of either string is same as another's tail part.
> @@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf)
>
> regs = get_arch_regstr(regn);
> if (!regs)
> - die("%u exceeds max register number.", regn);
> + die("Mapping for DWARF register number %u missing on this architecture.", regn);
>
> tvar->value = xstrdup(regs);
> if (ref) {
--
Masami Hiramatsu
e-mail: mhiramat@redhat.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] perf: Move arch specific code into separate arch directory
@ 2010-04-15 15:19 ` Masami Hiramatsu
0 siblings, 0 replies; 10+ messages in thread
From: Masami Hiramatsu @ 2010-04-15 15:19 UTC (permalink / raw)
To: Ian Munsie
Cc: Peter Zijlstra, Heiko Carstens, linux-kernel,
Arnaldo Carvalho de Melo, Paul Mackerras, Frederic Weisbecker,
Ingo Molnar, linuxppc-dev
Ian Munsie wrote:
> From: Ian Munsie <imunsie@au.ibm.com>
>
> The perf userspace tool included some architecture specific code to map
> registers from the DWARF register number into the names used by the regs
> and stack access API.
>
> This patch moves the architecture specific code out into a separate
> arch/x86 directory along with the infrastructure required to use it.
>
> Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Good work!
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Thank you very much!
> ---
> Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled
> altogether if the architecture specific Makefile does not define
> PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the
> architecture. A message indicating this is printed out during compilation.
>
> tools/perf/Makefile | 26 ++++++++++-
> tools/perf/arch/x86/Makefile | 2 +
> tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++++++++++
> tools/perf/util/include/dwarf-regs.h | 8 ++++
> tools/perf/util/probe-finder.c | 55 +-----------------------
> 5 files changed, 110 insertions(+), 56 deletions(-)
> create mode 100644 tools/perf/arch/x86/Makefile
> create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c
> create mode 100644 tools/perf/util/include/dwarf-regs.h
>
> diff --git a/tools/perf/Makefile b/tools/perf/Makefile
> index 57b3569..269d5dd 100644
> --- a/tools/perf/Makefile
> +++ b/tools/perf/Makefile
> @@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
> uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
> uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
>
> +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
> + -e s/arm.*/arm/ -e s/sa110/arm/ \
> + -e s/s390x/s390/ -e s/parisc64/parisc/ \
> + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
> + -e s/sh[234].*/sh/ )
> +
> +# Additional ARCH settings for x86
> +ifeq ($(ARCH),i386)
> + ARCH := x86
> +endif
> +ifeq ($(ARCH),x86_64)
> + ARCH := x86
> +endif
> +
> # CFLAGS and LDFLAGS are for the users to override from the command line.
>
> #
> @@ -285,7 +299,7 @@ endif
> # Those must not be GNU-specific; they are shared with perl/ which may
> # be built by a different compiler. (Note that this is an artifact now
> # but it still might be nice to keep that distinction.)
> -BASIC_CFLAGS = -Iutil/include
> +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
> BASIC_LDFLAGS =
>
> # Guard against environment variables
> @@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h
> LIB_H += util/include/asm/swab.h
> LIB_H += util/include/asm/system.h
> LIB_H += util/include/asm/uaccess.h
> +LIB_H += util/include/dwarf-regs.h
> LIB_H += perf.h
> LIB_H += util/cache.h
> LIB_H += util/callchain.h
> @@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE)
>
> -include config.mak.autogen
> -include config.mak
> +-include arch/$(ARCH)/Makefile
>
> ifeq ($(uname_S),Darwin)
> ifndef NO_FINK
> @@ -521,12 +537,16 @@ endif
> ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
> msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev);
> else
> +ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
> + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
> +else
> ifndef NO_DWARF
> BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
> EXTLIBS += -lelf -ldw
> LIB_OBJS += $(OUTPUT)util/probe-finder.o
> -endif
> -endif
> +endif # NO_DWARF
> +endif # PERF_HAVE_DWARF_REGS
> +endif # Dwarf support
>
> ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
> msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
> diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile
> new file mode 100644
> index 0000000..cbd7833
> --- /dev/null
> +++ b/tools/perf/arch/x86/Makefile
> @@ -0,0 +1,2 @@
> +PERF_HAVE_DWARF_REGS := 1
> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
> diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c
> new file mode 100644
> index 0000000..a794d30
> --- /dev/null
> +++ b/tools/perf/arch/x86/util/dwarf-regs.c
> @@ -0,0 +1,75 @@
> +/*
> + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names.
> + * Extracted from probe-finder.c
> + *
> + * Written by Masami Hiramatsu <mhiramat@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + *
> + */
> +
> +#include <libio.h>
> +#include <dwarf-regs.h>
> +
> +/*
> + * Generic dwarf analysis helpers
> + */
> +
> +#define X86_32_MAX_REGS 8
> +const char *x86_32_regs_table[X86_32_MAX_REGS] = {
> + "%ax",
> + "%cx",
> + "%dx",
> + "%bx",
> + "$stack", /* Stack address instead of %sp */
> + "%bp",
> + "%si",
> + "%di",
> +};
> +
> +#define X86_64_MAX_REGS 16
> +const char *x86_64_regs_table[X86_64_MAX_REGS] = {
> + "%ax",
> + "%dx",
> + "%cx",
> + "%bx",
> + "%si",
> + "%di",
> + "%bp",
> + "%sp",
> + "%r8",
> + "%r9",
> + "%r10",
> + "%r11",
> + "%r12",
> + "%r13",
> + "%r14",
> + "%r15",
> +};
> +
> +/* TODO: switching by dwarf address size */
> +#ifdef __x86_64__
> +#define ARCH_MAX_REGS X86_64_MAX_REGS
> +#define arch_regs_table x86_64_regs_table
> +#else
> +#define ARCH_MAX_REGS X86_32_MAX_REGS
> +#define arch_regs_table x86_32_regs_table
> +#endif
> +
> +/* Return architecture dependent register string (for kprobe-tracer) */
> +const char *get_arch_regstr(unsigned int n)
> +{
> + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
> +}
> diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h
> new file mode 100644
> index 0000000..cf6727e
> --- /dev/null
> +++ b/tools/perf/util/include/dwarf-regs.h
> @@ -0,0 +1,8 @@
> +#ifndef _PERF_DWARF_REGS_H_
> +#define _PERF_DWARF_REGS_H_
> +
> +#ifdef DWARF_SUPPORT
> +const char *get_arch_regstr(unsigned int n);
> +#endif
> +
> +#endif
> diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
> index a851377..83e5bd8 100644
> --- a/tools/perf/util/probe-finder.c
> +++ b/tools/perf/util/probe-finder.c
> @@ -31,6 +31,7 @@
> #include <string.h>
> #include <stdarg.h>
> #include <ctype.h>
> +#include <dwarf-regs.h>
>
> #include "string.h"
> #include "event.h"
> @@ -38,58 +39,6 @@
> #include "util.h"
> #include "probe-finder.h"
>
> -
> -/*
> - * Generic dwarf analysis helpers
> - */
> -
> -#define X86_32_MAX_REGS 8
> -const char *x86_32_regs_table[X86_32_MAX_REGS] = {
> - "%ax",
> - "%cx",
> - "%dx",
> - "%bx",
> - "$stack", /* Stack address instead of %sp */
> - "%bp",
> - "%si",
> - "%di",
> -};
> -
> -#define X86_64_MAX_REGS 16
> -const char *x86_64_regs_table[X86_64_MAX_REGS] = {
> - "%ax",
> - "%dx",
> - "%cx",
> - "%bx",
> - "%si",
> - "%di",
> - "%bp",
> - "%sp",
> - "%r8",
> - "%r9",
> - "%r10",
> - "%r11",
> - "%r12",
> - "%r13",
> - "%r14",
> - "%r15",
> -};
> -
> -/* TODO: switching by dwarf address size */
> -#ifdef __x86_64__
> -#define ARCH_MAX_REGS X86_64_MAX_REGS
> -#define arch_regs_table x86_64_regs_table
> -#else
> -#define ARCH_MAX_REGS X86_32_MAX_REGS
> -#define arch_regs_table x86_32_regs_table
> -#endif
> -
> -/* Return architecture dependent register string (for kprobe-tracer) */
> -static const char *get_arch_regstr(unsigned int n)
> -{
> - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
> -}
> -
> /*
> * Compare the tail of two strings.
> * Return 0 if whole of either string is same as another's tail part.
> @@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf)
>
> regs = get_arch_regstr(regn);
> if (!regs)
> - die("%u exceeds max register number.", regn);
> + die("Mapping for DWARF register number %u missing on this architecture.", regn);
>
> tvar->value = xstrdup(regs);
> if (ref) {
--
Masami Hiramatsu
e-mail: mhiramat@redhat.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/2] perf probe: Add PowerPC DWARF register number mappings
2010-04-15 3:57 ` Ian Munsie
@ 2010-04-15 15:19 ` Masami Hiramatsu
-1 siblings, 0 replies; 10+ messages in thread
From: Masami Hiramatsu @ 2010-04-15 15:19 UTC (permalink / raw)
To: Ian Munsie
Cc: linux-kernel, linuxppc-dev, benh, Heiko Carstens, Peter Zijlstra,
Paul Mackerras, Ingo Molnar, Arnaldo Carvalho de Melo
Ian Munsie wrote:
> From: Ian Munsie <imunsie@au.ibm.com>
>
> This patch adds mappings from the register numbers from DWARF to the
> register names used in the PowerPC Regs and Stack Access API. This
> allows perf probe to be used to record variable contents on PowerPC.
>
> This patch depends on functionality in the powerpc/next tree, though it
> will compile fine without it. Specifically this patch depends on commit
> "powerpc: Add kprobe-based event tracer"
>
> Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Thank you!
> ---
> tools/perf/arch/powerpc/Makefile | 2 +
> tools/perf/arch/powerpc/util/dwarf-regs.c | 88 +++++++++++++++++++++++++++++
> 2 files changed, 90 insertions(+), 0 deletions(-)
> create mode 100644 tools/perf/arch/powerpc/Makefile
> create mode 100644 tools/perf/arch/powerpc/util/dwarf-regs.c
>
> diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile
> new file mode 100644
> index 0000000..cbd7833
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/Makefile
> @@ -0,0 +1,2 @@
> +PERF_HAVE_DWARF_REGS := 1
> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
> diff --git a/tools/perf/arch/powerpc/util/dwarf-regs.c b/tools/perf/arch/powerpc/util/dwarf-regs.c
> new file mode 100644
> index 0000000..48ae0c5
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/util/dwarf-regs.c
> @@ -0,0 +1,88 @@
> +/*
> + * Mapping of DWARF debug register numbers into register names.
> + *
> + * Copyright (C) 2010 Ian Munsie, IBM Corporation.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <libio.h>
> +#include <dwarf-regs.h>
> +
> +
> +struct pt_regs_dwarfnum {
> + const char *name;
> + unsigned int dwarfnum;
> +};
> +
> +#define STR(s) #s
> +#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
> +#define GPR_DWARFNUM_NAME(num) \
> + {.name = STR(%gpr##num), .dwarfnum = num}
> +#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
> +
> +/*
> + * Reference:
> + * http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html
> + */
> +static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
> + GPR_DWARFNUM_NAME(0),
> + GPR_DWARFNUM_NAME(1),
> + GPR_DWARFNUM_NAME(2),
> + GPR_DWARFNUM_NAME(3),
> + GPR_DWARFNUM_NAME(4),
> + GPR_DWARFNUM_NAME(5),
> + GPR_DWARFNUM_NAME(6),
> + GPR_DWARFNUM_NAME(7),
> + GPR_DWARFNUM_NAME(8),
> + GPR_DWARFNUM_NAME(9),
> + GPR_DWARFNUM_NAME(10),
> + GPR_DWARFNUM_NAME(11),
> + GPR_DWARFNUM_NAME(12),
> + GPR_DWARFNUM_NAME(13),
> + GPR_DWARFNUM_NAME(14),
> + GPR_DWARFNUM_NAME(15),
> + GPR_DWARFNUM_NAME(16),
> + GPR_DWARFNUM_NAME(17),
> + GPR_DWARFNUM_NAME(18),
> + GPR_DWARFNUM_NAME(19),
> + GPR_DWARFNUM_NAME(20),
> + GPR_DWARFNUM_NAME(21),
> + GPR_DWARFNUM_NAME(22),
> + GPR_DWARFNUM_NAME(23),
> + GPR_DWARFNUM_NAME(24),
> + GPR_DWARFNUM_NAME(25),
> + GPR_DWARFNUM_NAME(26),
> + GPR_DWARFNUM_NAME(27),
> + GPR_DWARFNUM_NAME(28),
> + GPR_DWARFNUM_NAME(29),
> + GPR_DWARFNUM_NAME(30),
> + GPR_DWARFNUM_NAME(31),
> + REG_DWARFNUM_NAME("%msr", 66),
> + REG_DWARFNUM_NAME("%ctr", 109),
> + REG_DWARFNUM_NAME("%link", 108),
> + REG_DWARFNUM_NAME("%xer", 101),
> + REG_DWARFNUM_NAME("%dar", 119),
> + REG_DWARFNUM_NAME("%dsisr", 118),
> + REG_DWARFNUM_END,
> +};
> +
> +/**
> + * get_arch_regstr() - lookup register name from it's DWARF register number
> + * @n: the DWARF register number
> + *
> + * get_arch_regstr() returns the name of the register in struct
> + * regdwarfnum_table from it's DWARF register number. If the register is not
> + * found in the table, this returns NULL;
> + */
> +const char *get_arch_regstr(unsigned int n)
> +{
> + const struct pt_regs_dwarfnum *roff;
> + for (roff = regdwarfnum_table; roff->name != NULL; roff++)
> + if (roff->dwarfnum == n)
> + return roff->name;
> + return NULL;
> +}
--
Masami Hiramatsu
e-mail: mhiramat@redhat.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/2] perf probe: Add PowerPC DWARF register number mappings
@ 2010-04-15 15:19 ` Masami Hiramatsu
0 siblings, 0 replies; 10+ messages in thread
From: Masami Hiramatsu @ 2010-04-15 15:19 UTC (permalink / raw)
To: Ian Munsie
Cc: Peter Zijlstra, Heiko Carstens, linux-kernel,
Arnaldo Carvalho de Melo, Paul Mackerras, Ingo Molnar,
linuxppc-dev
Ian Munsie wrote:
> From: Ian Munsie <imunsie@au.ibm.com>
>
> This patch adds mappings from the register numbers from DWARF to the
> register names used in the PowerPC Regs and Stack Access API. This
> allows perf probe to be used to record variable contents on PowerPC.
>
> This patch depends on functionality in the powerpc/next tree, though it
> will compile fine without it. Specifically this patch depends on commit
> "powerpc: Add kprobe-based event tracer"
>
> Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Thank you!
> ---
> tools/perf/arch/powerpc/Makefile | 2 +
> tools/perf/arch/powerpc/util/dwarf-regs.c | 88 +++++++++++++++++++++++++++++
> 2 files changed, 90 insertions(+), 0 deletions(-)
> create mode 100644 tools/perf/arch/powerpc/Makefile
> create mode 100644 tools/perf/arch/powerpc/util/dwarf-regs.c
>
> diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile
> new file mode 100644
> index 0000000..cbd7833
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/Makefile
> @@ -0,0 +1,2 @@
> +PERF_HAVE_DWARF_REGS := 1
> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
> diff --git a/tools/perf/arch/powerpc/util/dwarf-regs.c b/tools/perf/arch/powerpc/util/dwarf-regs.c
> new file mode 100644
> index 0000000..48ae0c5
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/util/dwarf-regs.c
> @@ -0,0 +1,88 @@
> +/*
> + * Mapping of DWARF debug register numbers into register names.
> + *
> + * Copyright (C) 2010 Ian Munsie, IBM Corporation.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <libio.h>
> +#include <dwarf-regs.h>
> +
> +
> +struct pt_regs_dwarfnum {
> + const char *name;
> + unsigned int dwarfnum;
> +};
> +
> +#define STR(s) #s
> +#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
> +#define GPR_DWARFNUM_NAME(num) \
> + {.name = STR(%gpr##num), .dwarfnum = num}
> +#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
> +
> +/*
> + * Reference:
> + * http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html
> + */
> +static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
> + GPR_DWARFNUM_NAME(0),
> + GPR_DWARFNUM_NAME(1),
> + GPR_DWARFNUM_NAME(2),
> + GPR_DWARFNUM_NAME(3),
> + GPR_DWARFNUM_NAME(4),
> + GPR_DWARFNUM_NAME(5),
> + GPR_DWARFNUM_NAME(6),
> + GPR_DWARFNUM_NAME(7),
> + GPR_DWARFNUM_NAME(8),
> + GPR_DWARFNUM_NAME(9),
> + GPR_DWARFNUM_NAME(10),
> + GPR_DWARFNUM_NAME(11),
> + GPR_DWARFNUM_NAME(12),
> + GPR_DWARFNUM_NAME(13),
> + GPR_DWARFNUM_NAME(14),
> + GPR_DWARFNUM_NAME(15),
> + GPR_DWARFNUM_NAME(16),
> + GPR_DWARFNUM_NAME(17),
> + GPR_DWARFNUM_NAME(18),
> + GPR_DWARFNUM_NAME(19),
> + GPR_DWARFNUM_NAME(20),
> + GPR_DWARFNUM_NAME(21),
> + GPR_DWARFNUM_NAME(22),
> + GPR_DWARFNUM_NAME(23),
> + GPR_DWARFNUM_NAME(24),
> + GPR_DWARFNUM_NAME(25),
> + GPR_DWARFNUM_NAME(26),
> + GPR_DWARFNUM_NAME(27),
> + GPR_DWARFNUM_NAME(28),
> + GPR_DWARFNUM_NAME(29),
> + GPR_DWARFNUM_NAME(30),
> + GPR_DWARFNUM_NAME(31),
> + REG_DWARFNUM_NAME("%msr", 66),
> + REG_DWARFNUM_NAME("%ctr", 109),
> + REG_DWARFNUM_NAME("%link", 108),
> + REG_DWARFNUM_NAME("%xer", 101),
> + REG_DWARFNUM_NAME("%dar", 119),
> + REG_DWARFNUM_NAME("%dsisr", 118),
> + REG_DWARFNUM_END,
> +};
> +
> +/**
> + * get_arch_regstr() - lookup register name from it's DWARF register number
> + * @n: the DWARF register number
> + *
> + * get_arch_regstr() returns the name of the register in struct
> + * regdwarfnum_table from it's DWARF register number. If the register is not
> + * found in the table, this returns NULL;
> + */
> +const char *get_arch_regstr(unsigned int n)
> +{
> + const struct pt_regs_dwarfnum *roff;
> + for (roff = regdwarfnum_table; roff->name != NULL; roff++)
> + if (roff->dwarfnum == n)
> + return roff->name;
> + return NULL;
> +}
--
Masami Hiramatsu
e-mail: mhiramat@redhat.com
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-04-15 15:16 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-15 3:57 [PATCH v3] perf: Split out arch specific code & improve PowerPC perf probe support Ian Munsie
2010-04-15 3:57 ` Ian Munsie
2010-04-15 3:57 ` [PATCH v3 1/2] perf: Move arch specific code into separate arch directory Ian Munsie
2010-04-15 3:57 ` Ian Munsie
2010-04-15 3:57 ` [PATCH v3 2/2] perf probe: Add PowerPC DWARF register number mappings Ian Munsie
2010-04-15 3:57 ` Ian Munsie
2010-04-15 15:19 ` Masami Hiramatsu
2010-04-15 15:19 ` Masami Hiramatsu
2010-04-15 15:19 ` [PATCH v3 1/2] perf: Move arch specific code into separate arch directory Masami Hiramatsu
2010-04-15 15:19 ` Masami Hiramatsu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.