[PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Tomi,

Resending the patchset.

Checkpatch was not complaining at my end. Probably the mail server is
mangling the patches. I will send a tarball separately.

The only change in this version is that i've put the Video memory
initialization code in the board file.

The TSC2005 stuff is still thereas without it panel is not detected.
The merge conflict with TSC2005 patches if happens is very trivial to resolve.


regards,
-roger

These patches get the N900 LCD panel working.
Applys cleanly on 2.6.34-rc3

Changes since v2:
-Added Video mem init in board file
Changes since v1:
-Added Backlight control

Pre-requisites:
https://patchwork.kernel.org/patch/86318/
https://patchwork.kernel.org/patch/86319/
https://patchwork.kernel.org/patch/86320/

---
Roger Quadros (5):
  OMAP: RX51: Add LCD Panel support
  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
  OMAP: RX51: Add Touch Controller in SPI board info
  OMAP: DSS2: Add ACX565AKM Panel Driver
  OMAP: RX51: Update board defconfig

 arch/arm/configs/rx51_defconfig                |   39 ++-
 arch/arm/mach-omap2/Makefile                   |    1 +
 arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
 arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
 arch/arm/mach-omap2/board-rx51.c               |    2 +
 drivers/video/omap2/displays/Kconfig           |    6 +
 drivers/video/omap2/displays/Makefile          |    1 +
 drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
 8 files changed, 1017 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
 create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c

[PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Tomi,

Resending the patchset.

Checkpatch was not complaining at my end. Probably the mail server is
mangling the patches. I will send a tarball separately.

The only change in this version is that i've put the Video memory
initialization code in the board file.

The TSC2005 stuff is still thereas without it panel is not detected.
The merge conflict with TSC2005 patches if happens is very trivial to resolve.


regards,
-roger

These patches get the N900 LCD panel working.
Applys cleanly on 2.6.34-rc3

Changes since v2:
-Added Video mem init in board file
Changes since v1:
-Added Backlight control

Pre-requisites:
https://patchwork.kernel.org/patch/86318/
https://patchwork.kernel.org/patch/86319/
https://patchwork.kernel.org/patch/86320/

---
Roger Quadros (5):
  OMAP: RX51: Add LCD Panel support
  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
  OMAP: RX51: Add Touch Controller in SPI board info
  OMAP: DSS2: Add ACX565AKM Panel Driver
  OMAP: RX51: Update board defconfig

 arch/arm/configs/rx51_defconfig                |   39 ++-
 arch/arm/mach-omap2/Makefile                   |    1 +
 arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
 arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
 arch/arm/mach-omap2/board-rx51.c               |    2 +
 drivers/video/omap2/displays/Kconfig           |    6 +
 drivers/video/omap2/displays/Makefile          |    1 +
 drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
 8 files changed, 1017 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
 create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c

[PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

Adds basic support for LCD Panel on Nokia N900

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-rx51-peripherals.c |   13 +++
 arch/arm/mach-omap2/board-rx51-video.c       |  107 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-rx51.c             |    2 +
 4 files changed, 123 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rx51-video.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 4b9fc57..b03cbb4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
+					   board-rx51-video.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4377a4c..f404537 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,7 @@
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
+	RX51_SPI_MIPID,		/* LCD panel */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
+	[RX51_SPI_MIPID] = {
+		.modalias		= "acx565akm",
+		.bus_num		= 1,
+		.chip_select		= 2,
+		.max_speed_hz		= 6000000,
+		.controller_data	= &mipid_mcspi_config,
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
new file mode 100644
index 0000000..e4a9d4c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-video.c
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/mm.h>
+
+#include <asm/mach-types.h>
+#include <plat/mux.h>
+#include <plat/display.h>
+#include <plat/vram.h>
+#include <plat/mcspi.h>
+
+#include "mux.h"
+
+#define RX51_LCD_RESET_GPIO	90
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static int rx51_lcd_enable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void rx51_lcd_disable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device rx51_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "panel-acx565akm",
+	.type			= OMAP_DISPLAY_TYPE_SDI,
+	.phy.sdi.datapairs	= 2,
+	.reset_gpio		= RX51_LCD_RESET_GPIO,
+	.platform_enable	= rx51_lcd_enable,
+	.platform_disable	= rx51_lcd_disable,
+};
+
+static struct omap_dss_device *rx51_dss_devices[] = {
+	&rx51_lcd_device,
+};
+
+static struct omap_dss_board_info rx51_dss_board_info = {
+	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
+	.devices	= rx51_dss_devices,
+	.default_device	= &rx51_lcd_device,
+};
+
+struct platform_device rx51_display_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rx51_dss_board_info,
+	},
+};
+
+static struct platform_device *rx51_video_devices[] __initdata = {
+	&rx51_display_device,
+};
+
+static int __init rx51_video_init(void)
+{
+	if (!machine_is_nokia_rx51())
+		return 0;
+
+	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
+		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
+		return 0;
+	}
+
+	if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
+		return 0;
+	}
+
+	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
+
+	platform_add_devices(rx51_video_devices,
+				ARRAY_SIZE(rx51_video_devices));
+	return 0;
+}
+
+subsys_initcall(rx51_video_init);
+
+void __init rx51_video_mem_init(void)
+{
+	/*
+	 * GFX 864x480x32bpp
+	 * VID1/2 1280x720x32bpp double buffered
+	 */
+	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
+			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
+}
+
+#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index b155c36..1b86b5b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -36,6 +36,7 @@
 #define RX51_GPIO_SLEEP_IND 162
 
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
+extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
 	{
@@ -143,6 +144,7 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_343x();
+	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
-- 
1.6.0.4

[PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

Adds basic support for LCD Panel on Nokia N900

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-rx51-peripherals.c |   13 +++
 arch/arm/mach-omap2/board-rx51-video.c       |  107 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-rx51.c             |    2 +
 4 files changed, 123 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rx51-video.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 4b9fc57..b03cbb4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
+					   board-rx51-video.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4377a4c..f404537 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,7 @@
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
+	RX51_SPI_MIPID,		/* LCD panel */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
+	[RX51_SPI_MIPID] = {
+		.modalias		= "acx565akm",
+		.bus_num		= 1,
+		.chip_select		= 2,
+		.max_speed_hz		= 6000000,
+		.controller_data	= &mipid_mcspi_config,
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
new file mode 100644
index 0000000..e4a9d4c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-video.c
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/mm.h>
+
+#include <asm/mach-types.h>
+#include <plat/mux.h>
+#include <plat/display.h>
+#include <plat/vram.h>
+#include <plat/mcspi.h>
+
+#include "mux.h"
+
+#define RX51_LCD_RESET_GPIO	90
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static int rx51_lcd_enable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void rx51_lcd_disable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device rx51_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "panel-acx565akm",
+	.type			= OMAP_DISPLAY_TYPE_SDI,
+	.phy.sdi.datapairs	= 2,
+	.reset_gpio		= RX51_LCD_RESET_GPIO,
+	.platform_enable	= rx51_lcd_enable,
+	.platform_disable	= rx51_lcd_disable,
+};
+
+static struct omap_dss_device *rx51_dss_devices[] = {
+	&rx51_lcd_device,
+};
+
+static struct omap_dss_board_info rx51_dss_board_info = {
+	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
+	.devices	= rx51_dss_devices,
+	.default_device	= &rx51_lcd_device,
+};
+
+struct platform_device rx51_display_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rx51_dss_board_info,
+	},
+};
+
+static struct platform_device *rx51_video_devices[] __initdata = {
+	&rx51_display_device,
+};
+
+static int __init rx51_video_init(void)
+{
+	if (!machine_is_nokia_rx51())
+		return 0;
+
+	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
+		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
+		return 0;
+	}
+
+	if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
+		return 0;
+	}
+
+	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
+
+	platform_add_devices(rx51_video_devices,
+				ARRAY_SIZE(rx51_video_devices));
+	return 0;
+}
+
+subsys_initcall(rx51_video_init);
+
+void __init rx51_video_mem_init(void)
+{
+	/*
+	 * GFX 864x480x32bpp
+	 * VID1/2 1280x720x32bpp double buffered
+	 */
+	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
+			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
+}
+
+#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index b155c36..1b86b5b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -36,6 +36,7 @@
 #define RX51_GPIO_SLEEP_IND 162
 
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
+extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
 	{
@@ -143,6 +144,7 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_343x();
+	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
-- 
1.6.0.4

[PATCHv3 2/5] OMAP: RX51: Add "vdds_sdi" supply voltage for SDI

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

The SDI Display subsystem needs access to the vdds_sdi supply
regulator. This is TWL4030's VAUX1 supply on RX-51.

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f404537..3ef805e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -300,6 +300,19 @@ static struct regulator_consumer_supply rx51_vsim_supply = {
 	.dev_name = "mmci-omap-hs.1",
 };
 
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+	{
+		.supply	= "vdds_sdi",
+		.dev	= &rx51_display_device.dev,
+	},
+#endif
+};
+
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -310,6 +323,8 @@ static struct regulator_init_data rx51_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
+	.consumer_supplies	= rx51_vaux1_consumers,
 };
 
 static struct regulator_init_data rx51_vaux2 = {
-- 
1.6.0.4

[PATCHv3 2/5] OMAP: RX51: Add "vdds_sdi" supply voltage for SDI

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

The SDI Display subsystem needs access to the vdds_sdi supply
regulator. This is TWL4030's VAUX1 supply on RX-51.

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f404537..3ef805e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -300,6 +300,19 @@ static struct regulator_consumer_supply rx51_vsim_supply = {
 	.dev_name = "mmci-omap-hs.1",
 };
 
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+	{
+		.supply	= "vdds_sdi",
+		.dev	= &rx51_display_device.dev,
+	},
+#endif
+};
+
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -310,6 +323,8 @@ static struct regulator_init_data rx51_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
+	.consumer_supplies	= rx51_vaux1_consumers,
 };
 
 static struct regulator_init_data rx51_vaux2 = {
-- 
1.6.0.4

[PATCHv3 3/5] OMAP: RX51: Add Touch Controller in SPI board info

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

The Touch controller and LCD Panel share the same SPI bus 1.
So, we need to define the touch controller in the SPI board info
else, the SPI bus will be contended due to invalid state of
Touch controller's Chip Select thus preventing the LCD panel
from working.

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3ef805e..020f354 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -46,6 +46,7 @@
 enum {
 	RX51_SPI_WL1251,
 	RX51_SPI_MIPID,		/* LCD panel */
+	RX51_SPI_TSC2005,	/* Touch Controller */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -60,6 +61,11 @@ static struct omap2_mcspi_device_config mipid_mcspi_config = {
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -77,6 +83,15 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.max_speed_hz		= 6000000,
 		.controller_data	= &mipid_mcspi_config,
 	},
+	[RX51_SPI_TSC2005] = {
+		.modalias		= "tsc2005",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+		.max_speed_hz		= 6000000,
+		.controller_data	= &tsc2005_mcspi_config,
+		/* .platform_data = &tsc2005_config,*/
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-- 
1.6.0.4

[PATCHv3 3/5] OMAP: RX51: Add Touch Controller in SPI board info

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

The Touch controller and LCD Panel share the same SPI bus 1.
So, we need to define the touch controller in the SPI board info
else, the SPI bus will be contended due to invalid state of
Touch controller's Chip Select thus preventing the LCD panel
from working.

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3ef805e..020f354 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -46,6 +46,7 @@
 enum {
 	RX51_SPI_WL1251,
 	RX51_SPI_MIPID,		/* LCD panel */
+	RX51_SPI_TSC2005,	/* Touch Controller */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -60,6 +61,11 @@ static struct omap2_mcspi_device_config mipid_mcspi_config = {
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -77,6 +83,15 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.max_speed_hz		= 6000000,
 		.controller_data	= &mipid_mcspi_config,
 	},
+	[RX51_SPI_TSC2005] = {
+		.modalias		= "tsc2005",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+		.max_speed_hz		= 6000000,
+		.controller_data	= &tsc2005_mcspi_config,
+		/* .platform_data = &tsc2005_config,*/
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-- 
1.6.0.4

[PATCHv3 4/5] OMAP: DSS2: Add ACX565AKM Panel Driver

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

This is the panel used on Nokia N900

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 drivers/video/omap2/displays/Kconfig           |    6 +
 drivers/video/omap2/displays/Makefile          |    1 +
 drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
 3 files changed, 826 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index dfb57ee..ea42841 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -37,4 +37,10 @@ config PANEL_TPO_TD043MTEA1
         help
           LCD Panel used in OMAP3 Pandora
 
+config PANEL_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on OMAP2_DSS_SDI
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index e2bb321..aa38609 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
 obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
new file mode 100644
index 0000000..1f8eb70
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -0,0 +1,819 @@
+/*
+ * Support for ACX565AKM LCD Panel used on Nokia N900
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define MIPID_CMD_READ_DISP_ID		0x04
+#define MIPID_CMD_READ_RED		0x06
+#define MIPID_CMD_READ_GREEN		0x07
+#define MIPID_CMD_READ_BLUE		0x08
+#define MIPID_CMD_READ_DISP_STATUS	0x09
+#define MIPID_CMD_RDDSDR		0x0F
+#define MIPID_CMD_SLEEP_IN		0x10
+#define MIPID_CMD_SLEEP_OUT		0x11
+#define MIPID_CMD_DISP_OFF		0x28
+#define MIPID_CMD_DISP_ON		0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
+#define MIPID_CMD_WRITE_CTRL_DISP	0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP	0x54
+#define MIPID_CMD_WRITE_CABC		0x55
+#define MIPID_CMD_READ_CABC		0x56
+
+#define MIPID_VER_LPH8923		3
+#define MIPID_VER_LS041Y3		4
+#define MIPID_VER_L4F00311		8
+#define MIPID_VER_ACX565AKM		9
+
+struct acx565akm_device {
+	char		*name;
+	int		enabled;
+	int		model;
+	int		revision;
+	u8		display_id[3];
+	unsigned	has_bc:1;
+	unsigned	has_cabc:1;
+	unsigned	cabc_mode;
+	unsigned long	hw_guard_end;		/* next value of jiffies
+						   when we can issue the
+						   next sleep in/out command */
+	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+
+	struct spi_device	*spi;
+	struct mutex		mutex;
+
+	struct omap_dss_device	*dssdev;
+	struct backlight_device *bl_dev;
+};
+
+static struct acx565akm_device acx_dev;
+static int acx565akm_bl_update_status(struct backlight_device *dev);
+
+/*--------------------MIPID interface-----------------------------*/
+
+static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
+			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct spi_message	m;
+	struct spi_transfer	*x, xfer[5];
+	int			r;
+
+	BUG_ON(md->spi = NULL);
+
+	spi_message_init(&m);
+
+	memset(xfer, 0, sizeof(xfer));
+	x = &xfer[0];
+
+	cmd &=  0xff;
+	x->tx_buf = &cmd;
+	x->bits_per_word = 9;
+	x->len = 2;
+
+	if (rlen > 1 && wlen = 0) {
+		/*
+		 * Between the command and the response data there is a
+		 * dummy clock cycle. Add an extra bit after the command
+		 * word to account for this.
+		 */
+		x->bits_per_word = 10;
+		cmd <<= 1;
+	}
+	spi_message_add_tail(x, &m);
+
+	if (wlen) {
+		x++;
+		x->tx_buf = wbuf;
+		x->len = wlen;
+		x->bits_per_word = 9;
+		spi_message_add_tail(x, &m);
+	}
+
+	if (rlen) {
+		x++;
+		x->rx_buf	= rbuf;
+		x->len		= rlen;
+		spi_message_add_tail(x, &m);
+	}
+
+	r = spi_sync(md->spi, &m);
+	if (r < 0)
+		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
+{
+	acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct acx565akm_device *md,
+			       int reg, const u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct acx565akm_device *md,
+			      int reg, u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
+{
+	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct acx565akm_device *md)
+{
+	unsigned long wait = md->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+/*----------------------MIPID wrappers----------------------------*/
+
+static void set_sleep_mode(struct acx565akm_device *md, int on)
+{
+	int cmd;
+
+	if (on)
+		cmd = MIPID_CMD_SLEEP_IN;
+	else
+		cmd = MIPID_CMD_SLEEP_OUT;
+	/*
+	 * We have to keep 120msec between sleep in/out commands.
+	 * (8.2.15, 8.2.16).
+	 */
+	hw_guard_wait(md);
+	acx565akm_cmd(md, cmd);
+	hw_guard_start(md, 120);
+}
+
+static void set_display_state(struct acx565akm_device *md, int enabled)
+{
+	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+	acx565akm_cmd(md, cmd);
+}
+
+static int panel_enabled(struct acx565akm_device *md)
+{
+	u32 disp_status;
+	int enabled;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+	disp_status = __be32_to_cpu(disp_status);
+	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+	dev_dbg(&md->spi->dev,
+		"LCD panel %senabled by bootloader (status 0x%04x)\n",
+		enabled ? "" : "not ", disp_status);
+	return enabled;
+}
+
+static int panel_detect(struct acx565akm_device *md)
+{
+	acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
+	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+		md->display_id[0], md->display_id[1], md->display_id[2]);
+
+	switch (md->display_id[0]) {
+	case 0x10:
+		md->model = MIPID_VER_ACX565AKM;
+		md->name = "acx565akm";
+		md->has_bc = 1;
+		md->has_cabc = 1;
+		break;
+	case 0x29:
+		md->model = MIPID_VER_L4F00311;
+		md->name = "l4f00311";
+		break;
+	case 0x45:
+		md->model = MIPID_VER_LPH8923;
+		md->name = "lph8923";
+		break;
+	case 0x83:
+		md->model = MIPID_VER_LS041Y3;
+		md->name = "ls041y3";
+		break;
+	default:
+		md->name = "unknown";
+		dev_err(&md->spi->dev, "invalid display ID\n");
+		return -ENODEV;
+	}
+
+	md->revision = md->display_id[1];
+
+	dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+			md->name, md->revision);
+
+	return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
+{
+	u16 ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+	if (enable) {
+		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			CTRL_DISP_BACKLIGHT_ON;
+	} else {
+		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			  CTRL_DISP_BACKLIGHT_ON);
+	}
+
+	ctrl |= 1 << 8;
+	acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
+{
+	u16 cabc_ctrl;
+
+	md->cabc_mode = mode;
+	if (!md->enabled)
+		return;
+	cabc_ctrl = 0;
+	acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+	cabc_ctrl &= ~3;
+	cabc_ctrl |= (1 << 8) | (mode & 3);
+	acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct acx565akm_device *md)
+{
+	return md->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
+{
+	u8 cabc_ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+	return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
+{
+	int bv;
+
+	bv = level | (1 << 8);
+	acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+	if (level)
+		enable_backlight_ctrl(md, 1);
+	else
+		enable_backlight_ctrl(md, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
+{
+	u8 bv;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+	return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+	int r;
+	int level;
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+			dev->props.power = FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	r = 0;
+	if (md->has_bc)
+		acx565akm_set_brightness(md, level);
+	else if (md->dssdev->set_backlight)
+		r = md->dssdev->set_backlight(md->dssdev, level);
+	else
+		r = -ENODEV;
+
+	mutex_unlock(&md->mutex);
+
+	return r;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	if (!md->has_bc && md->dssdev->set_backlight = NULL)
+		return -ENODEV;
+
+	if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+			dev->props.power = FB_BLANK_UNBLANK) {
+		if (md->has_bc)
+			return acx565akm_get_actual_brightness(md);
+		else
+			return dev->props.brightness;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+	.get_brightness = acx565akm_bl_get_intensity,
+	.update_status  = acx565akm_bl_update_status,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char *cabc_modes[] = {
+	"off",		/* always used when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	if (!md->has_cabc)
+		mode = 0;
+	else
+		mode = get_cabc_mode(md);
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		const char *mode_str = cabc_modes[i];
+		int cmp_len = strlen(mode_str);
+
+		if (count > 0 && buf[count - 1] = '\n')
+			count--;
+		if (count != cmp_len)
+			continue;
+
+		if (strncmp(buf, mode_str, cmp_len) = 0)
+			break;
+	}
+
+	if (i = ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (!md->has_cabc && i != 0)
+		return -EINVAL;
+
+	mutex_lock(&md->mutex);
+	set_cabc_mode(md, i);
+	mutex_unlock(&md->mutex);
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int len;
+	int i;
+
+	if (!md->has_cabc)
+		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i = ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+	.attrs = bldev_attrs,
+};
+
+
+/*---------------------------ACX Panel----------------------------*/
+
+static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
+{
+	return 16;
+}
+
+static struct omap_video_timings acx_panel_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+	.pixel_clock	= 24000,
+	.hfp		= 28,
+	.hsw		= 4,
+	.hbp		= 24,
+	.vfp		= 3,
+	.vsw		= 3,
+	.vbp		= 4,
+};
+
+static int acx_panel_probe(struct omap_dss_device *dssdev)
+{
+	int r;
+	struct acx565akm_device *md = &acx_dev;
+	struct backlight_device *bldev;
+	int max_brightness, brightness;
+	struct backlight_properties props;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					OMAP_DSS_LCD_IHS;
+	/* FIXME AC bias ? */
+	dssdev->panel.timings = acx_panel_timings;
+
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
+	/*
+	 * After reset we have to wait 5 msec before the first
+	 * command can be sent.
+	 */
+	msleep(5);
+
+	md->enabled = panel_enabled(md);
+
+	r = panel_detect(md);
+	if (r) {
+		dev_err(&dssdev->dev, "%s panel detect error\n", __func__);
+		if (!md->enabled && dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+		return r;
+	}
+
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = dssdev;
+	mutex_unlock(&acx_dev.mutex);
+
+	if (!md->enabled) {
+		if (dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+	}
+
+	/*------- Backlight control --------*/
+
+	props.fb_blank = FB_BLANK_UNBLANK;
+	props.power = FB_BLANK_UNBLANK;
+
+	bldev = backlight_device_register("acx565akm", &md->spi->dev,
+			md, &acx565akm_bl_ops, &props);
+	md->bl_dev = bldev;
+	if (md->has_cabc) {
+		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+		if (r) {
+			dev_err(&bldev->dev,
+				"%s failed to create sysfs files\n", __func__);
+			backlight_device_unregister(bldev);
+			return r;
+		}
+		md->cabc_mode = get_hw_cabc_mode(md);
+	}
+
+	if (md->has_bc)
+		max_brightness = 255;
+	else
+		max_brightness = dssdev->max_backlight_level;
+
+	if (md->has_bc)
+		brightness = acx565akm_get_actual_brightness(md);
+	else if (dssdev->get_backlight)
+		brightness = dssdev->get_backlight(dssdev);
+	else
+		brightness = 0;
+
+	bldev->props.max_brightness = max_brightness;
+	bldev->props.brightness = brightness;
+
+	acx565akm_bl_update_status(bldev);
+	return 0;
+}
+
+static void acx_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
+	backlight_device_unregister(md->bl_dev);
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = NULL;
+	mutex_unlock(&acx_dev.mutex);
+}
+
+static int acx_panel_power_on(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	r = omapdss_sdi_display_enable(dssdev);
+	if (r) {
+		pr_err("%s sdi enable failed\n", __func__);
+		return r;
+	}
+
+	/*FIXME tweak me */
+	msleep(50);
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto fail;
+	}
+
+	if (md->enabled) {
+		dev_dbg(&md->spi->dev, "panel already enabled\n");
+		mutex_unlock(&md->mutex);
+		return 0;
+	}
+
+	/*
+	 * We have to meet all the following delay requirements:
+	 * 1. tRW: reset pulse width 10usec (7.12.1)
+	 * 2. tRT: reset cancel time 5msec (7.12.1)
+	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+	 *    case (7.6.2)
+	 * 4. 120msec before the sleep out command (7.12.1)
+	 */
+	msleep(120);
+
+	set_sleep_mode(md, 0);
+	md->enabled = 1;
+
+	/* 5msec between sleep out and the next command. (8.2.16) */
+	msleep(5);
+	set_display_state(md, 1);
+	set_cabc_mode(md, md->cabc_mode);
+
+	mutex_unlock(&md->mutex);
+
+	return acx565akm_bl_update_status(md->bl_dev);
+fail:
+	omapdss_sdi_display_disable(dssdev);
+	return r;
+}
+
+static void acx_panel_power_off(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (!md->enabled) {
+		mutex_unlock(&md->mutex);
+		return;
+	}
+	set_display_state(md, 0);
+	set_sleep_mode(md, 1);
+	md->enabled = 0;
+	/*
+	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+	 * ~50msec) after sending the sleep in command and asserting the
+	 * reset signal. We probably could assert the reset w/o the delay
+	 * but we still delay to avoid possible artifacts. (7.6.1)
+	 */
+	msleep(50);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* FIXME need to tweak this delay */
+	msleep(100);
+
+	omapdss_sdi_display_disable(dssdev);
+
+	mutex_unlock(&md->mutex);
+}
+
+static int acx_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int acx_panel_suspend(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int acx_panel_resume(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	int r;
+
+	if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE)
+		omapdss_sdi_display_disable(dssdev);
+
+	dssdev->panel.timings = *timings;
+
+	if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
+		r = omapdss_sdi_display_enable(dssdev);
+		if (r)
+			dev_err(&dssdev->dev, "%s enable failed\n", __func__);
+	}
+}
+
+static void acx_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static int acx_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	return 0;
+}
+
+
+static struct omap_dss_driver acx_panel_driver = {
+	.probe		= acx_panel_probe,
+	.remove		= acx_panel_remove,
+
+	.enable		= acx_panel_enable,
+	.disable	= acx_panel_disable,
+	.suspend	= acx_panel_suspend,
+	.resume		= acx_panel_resume,
+
+	.set_timings	= acx_panel_set_timings,
+	.get_timings	= acx_panel_get_timings,
+	.check_timings	= acx_panel_check_timings,
+
+	.get_recommended_bpp = acx_get_recommended_bpp,
+
+	.driver         = {
+		.name   = "panel-acx565akm",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/*--------------------SPI probe-------------------------*/
+
+static int acx565akm_spi_probe(struct spi_device *spi)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_3;
+	md->spi = spi;
+	mutex_init(&md->mutex);
+	dev_set_drvdata(&spi->dev, md);
+
+	omap_dss_register_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static int acx565akm_spi_remove(struct spi_device *spi)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+	omap_dss_unregister_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static struct spi_driver acx565akm_spi_driver = {
+	.driver = {
+		.name	= "acx565akm",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= acx565akm_spi_probe,
+	.remove	= __devexit_p(acx565akm_spi_remove),
+};
+
+static int __init acx565akm_init(void)
+{
+	return spi_register_driver(&acx565akm_spi_driver);
+}
+
+static void __exit acx565akm_exit(void)
+{
+	spi_unregister_driver(&acx565akm_spi_driver);
+}
+
+module_init(acx565akm_init);
+module_exit(acx565akm_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");
-- 
1.6.0.4

[PATCHv3 4/5] OMAP: DSS2: Add ACX565AKM Panel Driver

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

This is the panel used on Nokia N900

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 drivers/video/omap2/displays/Kconfig           |    6 +
 drivers/video/omap2/displays/Makefile          |    1 +
 drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
 3 files changed, 826 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index dfb57ee..ea42841 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -37,4 +37,10 @@ config PANEL_TPO_TD043MTEA1
         help
           LCD Panel used in OMAP3 Pandora
 
+config PANEL_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on OMAP2_DSS_SDI
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index e2bb321..aa38609 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
 obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
new file mode 100644
index 0000000..1f8eb70
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -0,0 +1,819 @@
+/*
+ * Support for ACX565AKM LCD Panel used on Nokia N900
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define MIPID_CMD_READ_DISP_ID		0x04
+#define MIPID_CMD_READ_RED		0x06
+#define MIPID_CMD_READ_GREEN		0x07
+#define MIPID_CMD_READ_BLUE		0x08
+#define MIPID_CMD_READ_DISP_STATUS	0x09
+#define MIPID_CMD_RDDSDR		0x0F
+#define MIPID_CMD_SLEEP_IN		0x10
+#define MIPID_CMD_SLEEP_OUT		0x11
+#define MIPID_CMD_DISP_OFF		0x28
+#define MIPID_CMD_DISP_ON		0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
+#define MIPID_CMD_WRITE_CTRL_DISP	0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP	0x54
+#define MIPID_CMD_WRITE_CABC		0x55
+#define MIPID_CMD_READ_CABC		0x56
+
+#define MIPID_VER_LPH8923		3
+#define MIPID_VER_LS041Y3		4
+#define MIPID_VER_L4F00311		8
+#define MIPID_VER_ACX565AKM		9
+
+struct acx565akm_device {
+	char		*name;
+	int		enabled;
+	int		model;
+	int		revision;
+	u8		display_id[3];
+	unsigned	has_bc:1;
+	unsigned	has_cabc:1;
+	unsigned	cabc_mode;
+	unsigned long	hw_guard_end;		/* next value of jiffies
+						   when we can issue the
+						   next sleep in/out command */
+	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+
+	struct spi_device	*spi;
+	struct mutex		mutex;
+
+	struct omap_dss_device	*dssdev;
+	struct backlight_device *bl_dev;
+};
+
+static struct acx565akm_device acx_dev;
+static int acx565akm_bl_update_status(struct backlight_device *dev);
+
+/*--------------------MIPID interface-----------------------------*/
+
+static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
+			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct spi_message	m;
+	struct spi_transfer	*x, xfer[5];
+	int			r;
+
+	BUG_ON(md->spi == NULL);
+
+	spi_message_init(&m);
+
+	memset(xfer, 0, sizeof(xfer));
+	x = &xfer[0];
+
+	cmd &=  0xff;
+	x->tx_buf = &cmd;
+	x->bits_per_word = 9;
+	x->len = 2;
+
+	if (rlen > 1 && wlen == 0) {
+		/*
+		 * Between the command and the response data there is a
+		 * dummy clock cycle. Add an extra bit after the command
+		 * word to account for this.
+		 */
+		x->bits_per_word = 10;
+		cmd <<= 1;
+	}
+	spi_message_add_tail(x, &m);
+
+	if (wlen) {
+		x++;
+		x->tx_buf = wbuf;
+		x->len = wlen;
+		x->bits_per_word = 9;
+		spi_message_add_tail(x, &m);
+	}
+
+	if (rlen) {
+		x++;
+		x->rx_buf	= rbuf;
+		x->len		= rlen;
+		spi_message_add_tail(x, &m);
+	}
+
+	r = spi_sync(md->spi, &m);
+	if (r < 0)
+		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
+{
+	acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct acx565akm_device *md,
+			       int reg, const u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct acx565akm_device *md,
+			      int reg, u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
+{
+	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct acx565akm_device *md)
+{
+	unsigned long wait = md->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+/*----------------------MIPID wrappers----------------------------*/
+
+static void set_sleep_mode(struct acx565akm_device *md, int on)
+{
+	int cmd;
+
+	if (on)
+		cmd = MIPID_CMD_SLEEP_IN;
+	else
+		cmd = MIPID_CMD_SLEEP_OUT;
+	/*
+	 * We have to keep 120msec between sleep in/out commands.
+	 * (8.2.15, 8.2.16).
+	 */
+	hw_guard_wait(md);
+	acx565akm_cmd(md, cmd);
+	hw_guard_start(md, 120);
+}
+
+static void set_display_state(struct acx565akm_device *md, int enabled)
+{
+	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+	acx565akm_cmd(md, cmd);
+}
+
+static int panel_enabled(struct acx565akm_device *md)
+{
+	u32 disp_status;
+	int enabled;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+	disp_status = __be32_to_cpu(disp_status);
+	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+	dev_dbg(&md->spi->dev,
+		"LCD panel %senabled by bootloader (status 0x%04x)\n",
+		enabled ? "" : "not ", disp_status);
+	return enabled;
+}
+
+static int panel_detect(struct acx565akm_device *md)
+{
+	acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
+	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+		md->display_id[0], md->display_id[1], md->display_id[2]);
+
+	switch (md->display_id[0]) {
+	case 0x10:
+		md->model = MIPID_VER_ACX565AKM;
+		md->name = "acx565akm";
+		md->has_bc = 1;
+		md->has_cabc = 1;
+		break;
+	case 0x29:
+		md->model = MIPID_VER_L4F00311;
+		md->name = "l4f00311";
+		break;
+	case 0x45:
+		md->model = MIPID_VER_LPH8923;
+		md->name = "lph8923";
+		break;
+	case 0x83:
+		md->model = MIPID_VER_LS041Y3;
+		md->name = "ls041y3";
+		break;
+	default:
+		md->name = "unknown";
+		dev_err(&md->spi->dev, "invalid display ID\n");
+		return -ENODEV;
+	}
+
+	md->revision = md->display_id[1];
+
+	dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+			md->name, md->revision);
+
+	return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
+{
+	u16 ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+	if (enable) {
+		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			CTRL_DISP_BACKLIGHT_ON;
+	} else {
+		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			  CTRL_DISP_BACKLIGHT_ON);
+	}
+
+	ctrl |= 1 << 8;
+	acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
+{
+	u16 cabc_ctrl;
+
+	md->cabc_mode = mode;
+	if (!md->enabled)
+		return;
+	cabc_ctrl = 0;
+	acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+	cabc_ctrl &= ~3;
+	cabc_ctrl |= (1 << 8) | (mode & 3);
+	acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct acx565akm_device *md)
+{
+	return md->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
+{
+	u8 cabc_ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+	return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
+{
+	int bv;
+
+	bv = level | (1 << 8);
+	acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+	if (level)
+		enable_backlight_ctrl(md, 1);
+	else
+		enable_backlight_ctrl(md, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
+{
+	u8 bv;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+	return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+	int r;
+	int level;
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	r = 0;
+	if (md->has_bc)
+		acx565akm_set_brightness(md, level);
+	else if (md->dssdev->set_backlight)
+		r = md->dssdev->set_backlight(md->dssdev, level);
+	else
+		r = -ENODEV;
+
+	mutex_unlock(&md->mutex);
+
+	return r;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	if (!md->has_bc && md->dssdev->set_backlight == NULL)
+		return -ENODEV;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK) {
+		if (md->has_bc)
+			return acx565akm_get_actual_brightness(md);
+		else
+			return dev->props.brightness;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+	.get_brightness = acx565akm_bl_get_intensity,
+	.update_status  = acx565akm_bl_update_status,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char *cabc_modes[] = {
+	"off",		/* always used when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	if (!md->has_cabc)
+		mode = 0;
+	else
+		mode = get_cabc_mode(md);
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		const char *mode_str = cabc_modes[i];
+		int cmp_len = strlen(mode_str);
+
+		if (count > 0 && buf[count - 1] == '\n')
+			count--;
+		if (count != cmp_len)
+			continue;
+
+		if (strncmp(buf, mode_str, cmp_len) == 0)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (!md->has_cabc && i != 0)
+		return -EINVAL;
+
+	mutex_lock(&md->mutex);
+	set_cabc_mode(md, i);
+	mutex_unlock(&md->mutex);
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int len;
+	int i;
+
+	if (!md->has_cabc)
+		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+	.attrs = bldev_attrs,
+};
+
+
+/*---------------------------ACX Panel----------------------------*/
+
+static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
+{
+	return 16;
+}
+
+static struct omap_video_timings acx_panel_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+	.pixel_clock	= 24000,
+	.hfp		= 28,
+	.hsw		= 4,
+	.hbp		= 24,
+	.vfp		= 3,
+	.vsw		= 3,
+	.vbp		= 4,
+};
+
+static int acx_panel_probe(struct omap_dss_device *dssdev)
+{
+	int r;
+	struct acx565akm_device *md = &acx_dev;
+	struct backlight_device *bldev;
+	int max_brightness, brightness;
+	struct backlight_properties props;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					OMAP_DSS_LCD_IHS;
+	/* FIXME AC bias ? */
+	dssdev->panel.timings = acx_panel_timings;
+
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
+	/*
+	 * After reset we have to wait 5 msec before the first
+	 * command can be sent.
+	 */
+	msleep(5);
+
+	md->enabled = panel_enabled(md);
+
+	r = panel_detect(md);
+	if (r) {
+		dev_err(&dssdev->dev, "%s panel detect error\n", __func__);
+		if (!md->enabled && dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+		return r;
+	}
+
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = dssdev;
+	mutex_unlock(&acx_dev.mutex);
+
+	if (!md->enabled) {
+		if (dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+	}
+
+	/*------- Backlight control --------*/
+
+	props.fb_blank = FB_BLANK_UNBLANK;
+	props.power = FB_BLANK_UNBLANK;
+
+	bldev = backlight_device_register("acx565akm", &md->spi->dev,
+			md, &acx565akm_bl_ops, &props);
+	md->bl_dev = bldev;
+	if (md->has_cabc) {
+		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+		if (r) {
+			dev_err(&bldev->dev,
+				"%s failed to create sysfs files\n", __func__);
+			backlight_device_unregister(bldev);
+			return r;
+		}
+		md->cabc_mode = get_hw_cabc_mode(md);
+	}
+
+	if (md->has_bc)
+		max_brightness = 255;
+	else
+		max_brightness = dssdev->max_backlight_level;
+
+	if (md->has_bc)
+		brightness = acx565akm_get_actual_brightness(md);
+	else if (dssdev->get_backlight)
+		brightness = dssdev->get_backlight(dssdev);
+	else
+		brightness = 0;
+
+	bldev->props.max_brightness = max_brightness;
+	bldev->props.brightness = brightness;
+
+	acx565akm_bl_update_status(bldev);
+	return 0;
+}
+
+static void acx_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
+	backlight_device_unregister(md->bl_dev);
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = NULL;
+	mutex_unlock(&acx_dev.mutex);
+}
+
+static int acx_panel_power_on(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	r = omapdss_sdi_display_enable(dssdev);
+	if (r) {
+		pr_err("%s sdi enable failed\n", __func__);
+		return r;
+	}
+
+	/*FIXME tweak me */
+	msleep(50);
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto fail;
+	}
+
+	if (md->enabled) {
+		dev_dbg(&md->spi->dev, "panel already enabled\n");
+		mutex_unlock(&md->mutex);
+		return 0;
+	}
+
+	/*
+	 * We have to meet all the following delay requirements:
+	 * 1. tRW: reset pulse width 10usec (7.12.1)
+	 * 2. tRT: reset cancel time 5msec (7.12.1)
+	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+	 *    case (7.6.2)
+	 * 4. 120msec before the sleep out command (7.12.1)
+	 */
+	msleep(120);
+
+	set_sleep_mode(md, 0);
+	md->enabled = 1;
+
+	/* 5msec between sleep out and the next command. (8.2.16) */
+	msleep(5);
+	set_display_state(md, 1);
+	set_cabc_mode(md, md->cabc_mode);
+
+	mutex_unlock(&md->mutex);
+
+	return acx565akm_bl_update_status(md->bl_dev);
+fail:
+	omapdss_sdi_display_disable(dssdev);
+	return r;
+}
+
+static void acx_panel_power_off(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (!md->enabled) {
+		mutex_unlock(&md->mutex);
+		return;
+	}
+	set_display_state(md, 0);
+	set_sleep_mode(md, 1);
+	md->enabled = 0;
+	/*
+	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+	 * ~50msec) after sending the sleep in command and asserting the
+	 * reset signal. We probably could assert the reset w/o the delay
+	 * but we still delay to avoid possible artifacts. (7.6.1)
+	 */
+	msleep(50);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* FIXME need to tweak this delay */
+	msleep(100);
+
+	omapdss_sdi_display_disable(dssdev);
+
+	mutex_unlock(&md->mutex);
+}
+
+static int acx_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int acx_panel_suspend(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int acx_panel_resume(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		omapdss_sdi_display_disable(dssdev);
+
+	dssdev->panel.timings = *timings;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		r = omapdss_sdi_display_enable(dssdev);
+		if (r)
+			dev_err(&dssdev->dev, "%s enable failed\n", __func__);
+	}
+}
+
+static void acx_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static int acx_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	return 0;
+}
+
+
+static struct omap_dss_driver acx_panel_driver = {
+	.probe		= acx_panel_probe,
+	.remove		= acx_panel_remove,
+
+	.enable		= acx_panel_enable,
+	.disable	= acx_panel_disable,
+	.suspend	= acx_panel_suspend,
+	.resume		= acx_panel_resume,
+
+	.set_timings	= acx_panel_set_timings,
+	.get_timings	= acx_panel_get_timings,
+	.check_timings	= acx_panel_check_timings,
+
+	.get_recommended_bpp = acx_get_recommended_bpp,
+
+	.driver         = {
+		.name   = "panel-acx565akm",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/*--------------------SPI probe-------------------------*/
+
+static int acx565akm_spi_probe(struct spi_device *spi)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_3;
+	md->spi = spi;
+	mutex_init(&md->mutex);
+	dev_set_drvdata(&spi->dev, md);
+
+	omap_dss_register_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static int acx565akm_spi_remove(struct spi_device *spi)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+	omap_dss_unregister_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static struct spi_driver acx565akm_spi_driver = {
+	.driver = {
+		.name	= "acx565akm",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= acx565akm_spi_probe,
+	.remove	= __devexit_p(acx565akm_spi_remove),
+};
+
+static int __init acx565akm_init(void)
+{
+	return spi_register_driver(&acx565akm_spi_driver);
+}
+
+static void __exit acx565akm_exit(void)
+{
+	spi_unregister_driver(&acx565akm_spi_driver);
+}
+
+module_init(acx565akm_init);
+module_exit(acx565akm_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");
-- 
1.6.0.4

[PATCHv3 5/5] OMAP: RX51: Update board defconfig

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

Add LCD, Boot-up logo, framebuffer console, Keypad
and Power button support

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/configs/rx51_defconfig |   39 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 38 insertions(+), 1 deletions(-)

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 45135ff..e891af8 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -787,6 +787,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -812,6 +813,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -1113,7 +1115,40 @@ CONFIG_RADIO_ADAPTERS=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+
+# Frame buffer hardware drivers
+#
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_DPI is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_DSS_SDI=y
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_ACX565AKM=y
+
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1130,6 +1165,8 @@ CONFIG_DISPLAY_SUPPORT=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
 # CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-- 
1.6.0.4

[PATCHv3 5/5] OMAP: RX51: Update board defconfig

[Roger Quadros]

From: Roger Quadros <roger.quadros@nokia.com>

Add LCD, Boot-up logo, framebuffer console, Keypad
and Power button support

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
---
 arch/arm/configs/rx51_defconfig |   39 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 38 insertions(+), 1 deletions(-)

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 45135ff..e891af8 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -787,6 +787,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -812,6 +813,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -1113,7 +1115,40 @@ CONFIG_RADIO_ADAPTERS=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+
+# Frame buffer hardware drivers
+#
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_DPI is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_DSS_SDI=y
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_ACX565AKM=y
+
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1130,6 +1165,8 @@ CONFIG_DISPLAY_SUPPORT=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
 # CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-- 
1.6.0.4

Re: [PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Kevin Hilman]

Roger Quadros <roger.quadros@nokia.com> writes:

> From: Roger Quadros <roger.quadros@nokia.com>
>
> Adds basic support for LCD Panel on Nokia N900
>
> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>

Just noticed a compile problem here...

[...]

> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c

[...]

> +void __init rx51_video_mem_init(void)
> +{
> +	/*
> +	 * GFX 864x480x32bpp
> +	 * VID1/2 1280x720x32bpp double buffered
> +	 */
> +	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
> +			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
> +}
> +
> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */

This function is available conditionally based on the #ifdefs, but...

> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
> index b155c36..1b86b5b 100644
> --- a/arch/arm/mach-omap2/board-rx51.c
> +++ b/arch/arm/mach-omap2/board-rx51.c
> @@ -36,6 +36,7 @@
>  #define RX51_GPIO_SLEEP_IND 162
>  
>  struct omap_sdrc_params *rx51_get_sdram_timings(void);
> +extern void rx51_video_mem_init(void);
>  
>  static struct gpio_led gpio_leds[] = {
>  	{
> @@ -143,6 +144,7 @@ static void __init rx51_init(void)
>  static void __init rx51_map_io(void)
>  {
>  	omap2_set_globals_343x();
> +	rx51_video_mem_init();

... here it is always called, giving a compiler error when building
without FB support.

Kevin

Re: [PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Kevin Hilman]

Roger Quadros <roger.quadros@nokia.com> writes:

> From: Roger Quadros <roger.quadros@nokia.com>
>
> Adds basic support for LCD Panel on Nokia N900
>
> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>

Just noticed a compile problem here...

[...]

> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c

[...]

> +void __init rx51_video_mem_init(void)
> +{
> +	/*
> +	 * GFX 864x480x32bpp
> +	 * VID1/2 1280x720x32bpp double buffered
> +	 */
> +	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
> +			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
> +}
> +
> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */

This function is available conditionally based on the #ifdefs, but...

> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
> index b155c36..1b86b5b 100644
> --- a/arch/arm/mach-omap2/board-rx51.c
> +++ b/arch/arm/mach-omap2/board-rx51.c
> @@ -36,6 +36,7 @@
>  #define RX51_GPIO_SLEEP_IND 162
>  
>  struct omap_sdrc_params *rx51_get_sdram_timings(void);
> +extern void rx51_video_mem_init(void);
>  
>  static struct gpio_led gpio_leds[] = {
>  	{
> @@ -143,6 +144,7 @@ static void __init rx51_init(void)
>  static void __init rx51_map_io(void)
>  {
>  	omap2_set_globals_343x();
> +	rx51_video_mem_init();

... here it is always called, giving a compiler error when building
without FB support.

Kevin

Re: [PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Roger Quadros]

Hi Kevin,

ext Kevin Hilman wrote:
> Roger Quadros <roger.quadros@nokia.com> writes:
> 
>> From: Roger Quadros <roger.quadros@nokia.com>
>>
>> Adds basic support for LCD Panel on Nokia N900
>>
>> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
> 
> Just noticed a compile problem here...
> 
> [...]
> 
>> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
> 
> [...]
> 
>> +void __init rx51_video_mem_init(void)
>> +{
>> +	/*
>> +	 * GFX 864x480x32bpp
>> +	 * VID1/2 1280x720x32bpp double buffered
>> +	 */
>> +	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
>> +			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
>> +}
>> +
>> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
> 
> This function is available conditionally based on the #ifdefs, but...
> 
>> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
>> index b155c36..1b86b5b 100644
>> --- a/arch/arm/mach-omap2/board-rx51.c
>> +++ b/arch/arm/mach-omap2/board-rx51.c
>> @@ -36,6 +36,7 @@
>>  #define RX51_GPIO_SLEEP_IND 162
>>  
>>  struct omap_sdrc_params *rx51_get_sdram_timings(void);
>> +extern void rx51_video_mem_init(void);
>>  
>>  static struct gpio_led gpio_leds[] = {
>>  	{
>> @@ -143,6 +144,7 @@ static void __init rx51_init(void)
>>  static void __init rx51_map_io(void)
>>  {
>>  	omap2_set_globals_343x();
>> +	rx51_video_mem_init();
> 
> ... here it is always called, giving a compiler error when building
> without FB support.

Thanks for pointing this out. will send another revision for this patch.

cheers,
-roger

Re: [PATCHv3 1/5] OMAP: RX51: Add LCD Panel support

[Roger Quadros]

Hi Kevin,

ext Kevin Hilman wrote:
> Roger Quadros <roger.quadros@nokia.com> writes:
> 
>> From: Roger Quadros <roger.quadros@nokia.com>
>>
>> Adds basic support for LCD Panel on Nokia N900
>>
>> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
> 
> Just noticed a compile problem here...
> 
> [...]
> 
>> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
> 
> [...]
> 
>> +void __init rx51_video_mem_init(void)
>> +{
>> +	/*
>> +	 * GFX 864x480x32bpp
>> +	 * VID1/2 1280x720x32bpp double buffered
>> +	 */
>> +	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
>> +			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
>> +}
>> +
>> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
> 
> This function is available conditionally based on the #ifdefs, but...
> 
>> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
>> index b155c36..1b86b5b 100644
>> --- a/arch/arm/mach-omap2/board-rx51.c
>> +++ b/arch/arm/mach-omap2/board-rx51.c
>> @@ -36,6 +36,7 @@
>>  #define RX51_GPIO_SLEEP_IND 162
>>  
>>  struct omap_sdrc_params *rx51_get_sdram_timings(void);
>> +extern void rx51_video_mem_init(void);
>>  
>>  static struct gpio_led gpio_leds[] = {
>>  	{
>> @@ -143,6 +144,7 @@ static void __init rx51_init(void)
>>  static void __init rx51_map_io(void)
>>  {
>>  	omap2_set_globals_343x();
>> +	rx51_video_mem_init();
> 
> ... here it is always called, giving a compiler error when building
> without FB support.

Thanks for pointing this out. will send another revision for this patch.

cheers,
-roger

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

[-- Attachment #1: Type: text/plain, Size: 2059 bytes --]

Tarball attached in case checkpatch complains.

-roger

Quadros Roger (Nokia-D/Helsinki) wrote:
> Tomi,
> 
> Resending the patchset.
> 
> Checkpatch was not complaining at my end. Probably the mail server is
> mangling the patches. I will send a tarball separately.
> 
> The only change in this version is that i've put the Video memory
> initialization code in the board file.
> 
> The TSC2005 stuff is still thereas without it panel is not detected.
> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> 
> 
> regards,
> -roger
> 
> These patches get the N900 LCD panel working.
> Applys cleanly on 2.6.34-rc3
> 
> Changes since v2:
> -Added Video mem init in board file
> Changes since v1:
> -Added Backlight control
> 
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
> 
> ---
> Roger Quadros (5):
>   OMAP: RX51: Add LCD Panel support
>   OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>   OMAP: RX51: Add Touch Controller in SPI board info
>   OMAP: DSS2: Add ACX565AKM Panel Driver
>   OMAP: RX51: Update board defconfig
> 
>  arch/arm/configs/rx51_defconfig                |   39 ++-
>  arch/arm/mach-omap2/Makefile                   |    1 +
>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>  drivers/video/omap2/displays/Kconfig           |    6 +
>  drivers/video/omap2/displays/Makefile          |    1 +
>  drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
>  8 files changed, 1017 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


[-- Attachment #2: n900-lcd-v3.tar.gz --]
[-- Type: application/x-gzip, Size: 9961 bytes --]

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

[-- Attachment #1: Type: text/plain, Size: 2059 bytes --]

Tarball attached in case checkpatch complains.

-roger

Quadros Roger (Nokia-D/Helsinki) wrote:
> Tomi,
> 
> Resending the patchset.
> 
> Checkpatch was not complaining at my end. Probably the mail server is
> mangling the patches. I will send a tarball separately.
> 
> The only change in this version is that i've put the Video memory
> initialization code in the board file.
> 
> The TSC2005 stuff is still thereas without it panel is not detected.
> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> 
> 
> regards,
> -roger
> 
> These patches get the N900 LCD panel working.
> Applys cleanly on 2.6.34-rc3
> 
> Changes since v2:
> -Added Video mem init in board file
> Changes since v1:
> -Added Backlight control
> 
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
> 
> ---
> Roger Quadros (5):
>   OMAP: RX51: Add LCD Panel support
>   OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>   OMAP: RX51: Add Touch Controller in SPI board info
>   OMAP: DSS2: Add ACX565AKM Panel Driver
>   OMAP: RX51: Update board defconfig
> 
>  arch/arm/configs/rx51_defconfig                |   39 ++-
>  arch/arm/mach-omap2/Makefile                   |    1 +
>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>  drivers/video/omap2/displays/Kconfig           |    6 +
>  drivers/video/omap2/displays/Makefile          |    1 +
>  drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
>  8 files changed, 1017 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


[-- Attachment #2: n900-lcd-v3.tar.gz --]
[-- Type: application/x-gzip, Size: 9961 bytes --]

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Grazvydas Ignotas]

Something's strange with Tomi's mail path I guess, I always send
patches with git send-email and he still received some of them (but
not all) mangled.

On Thu, Apr 15, 2010 at 3:08 PM, Roger Quadros <roger.quadros@nokia.com> wrote:
> Tarball attached in case checkpatch complains.
>
> -roger
>
> Quadros Roger (Nokia-D/Helsinki) wrote:
>>
>> Tomi,
>>
>> Resending the patchset.
>>
>> Checkpatch was not complaining at my end. Probably the mail server is
>> mangling the patches. I will send a tarball separately.
>>
>> The only change in this version is that i've put the Video memory
>> initialization code in the board file.
>>
>> The TSC2005 stuff is still thereas without it panel is not detected.
>> The merge conflict with TSC2005 patches if happens is very trivial to
>> resolve.
>>
>>
>> regards,
>> -roger
>>
>> These patches get the N900 LCD panel working.
>> Applys cleanly on 2.6.34-rc3
>>
>> Changes since v2:
>> -Added Video mem init in board file
>> Changes since v1:
>> -Added Backlight control
>>
>> Pre-requisites:
>> https://patchwork.kernel.org/patch/86318/
>> https://patchwork.kernel.org/patch/86319/
>> https://patchwork.kernel.org/patch/86320/
>>
>> ---
>> Roger Quadros (5):
>>  OMAP: RX51: Add LCD Panel support
>>  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>>  OMAP: RX51: Add Touch Controller in SPI board info
>>  OMAP: DSS2: Add ACX565AKM Panel Driver
>>  OMAP: RX51: Update board defconfig
>>
>>  arch/arm/configs/rx51_defconfig                |   39 ++-
>>  arch/arm/mach-omap2/Makefile                   |    1 +
>>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>>  drivers/video/omap2/displays/Kconfig           |    6 +
>>  drivers/video/omap2/displays/Makefile          |    1 +
>>  drivers/video/omap2/displays/panel-acx565akm.c |  819
>> ++++++++++++++++++++++++
>>  8 files changed, 1017 insertions(+), 1 deletions(-)
>>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Grazvydas Ignotas]

Something's strange with Tomi's mail path I guess, I always send
patches with git send-email and he still received some of them (but
not all) mangled.

On Thu, Apr 15, 2010 at 3:08 PM, Roger Quadros <roger.quadros@nokia.com> wrote:
> Tarball attached in case checkpatch complains.
>
> -roger
>
> Quadros Roger (Nokia-D/Helsinki) wrote:
>>
>> Tomi,
>>
>> Resending the patchset.
>>
>> Checkpatch was not complaining at my end. Probably the mail server is
>> mangling the patches. I will send a tarball separately.
>>
>> The only change in this version is that i've put the Video memory
>> initialization code in the board file.
>>
>> The TSC2005 stuff is still thereas without it panel is not detected.
>> The merge conflict with TSC2005 patches if happens is very trivial to
>> resolve.
>>
>>
>> regards,
>> -roger
>>
>> These patches get the N900 LCD panel working.
>> Applys cleanly on 2.6.34-rc3
>>
>> Changes since v2:
>> -Added Video mem init in board file
>> Changes since v1:
>> -Added Backlight control
>>
>> Pre-requisites:
>> https://patchwork.kernel.org/patch/86318/
>> https://patchwork.kernel.org/patch/86319/
>> https://patchwork.kernel.org/patch/86320/
>>
>> ---
>> Roger Quadros (5):
>>  OMAP: RX51: Add LCD Panel support
>>  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>>  OMAP: RX51: Add Touch Controller in SPI board info
>>  OMAP: DSS2: Add ACX565AKM Panel Driver
>>  OMAP: RX51: Update board defconfig
>>
>>  arch/arm/configs/rx51_defconfig                |   39 ++-
>>  arch/arm/mach-omap2/Makefile                   |    1 +
>>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>>  drivers/video/omap2/displays/Kconfig           |    6 +
>>  drivers/video/omap2/displays/Makefile          |    1 +
>>  drivers/video/omap2/displays/panel-acx565akm.c |  819
>> ++++++++++++++++++++++++
>>  8 files changed, 1017 insertions(+), 1 deletions(-)
>>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Tomi Valkeinen]

On Thu, 2010-04-15 at 16:00 +0200, ext Grazvydas Ignotas wrote:
> Something's strange with Tomi's mail path I guess, I always send
> patches with git send-email and he still received some of them (but
> not all) mangled.

Ahm, it could then be the infamous Nokia mailserver, which I think
Microsoft has designed to mangle linux patches...

It's strange that it happens only sometimes.

 Tomi

> 
> On Thu, Apr 15, 2010 at 3:08 PM, Roger Quadros <roger.quadros@nokia.com> wrote:
> > Tarball attached in case checkpatch complains.
> >
> > -roger
> >
> > Quadros Roger (Nokia-D/Helsinki) wrote:
> >>
> >> Tomi,
> >>
> >> Resending the patchset.
> >>
> >> Checkpatch was not complaining at my end. Probably the mail server is
> >> mangling the patches. I will send a tarball separately.
> >>
> >> The only change in this version is that i've put the Video memory
> >> initialization code in the board file.
> >>
> >> The TSC2005 stuff is still thereas without it panel is not detected.
> >> The merge conflict with TSC2005 patches if happens is very trivial to
> >> resolve.
> >>
> >>
> >> regards,
> >> -roger
> >>
> >> These patches get the N900 LCD panel working.
> >> Applys cleanly on 2.6.34-rc3
> >>
> >> Changes since v2:
> >> -Added Video mem init in board file
> >> Changes since v1:
> >> -Added Backlight control
> >>
> >> Pre-requisites:
> >> https://patchwork.kernel.org/patch/86318/
> >> https://patchwork.kernel.org/patch/86319/
> >> https://patchwork.kernel.org/patch/86320/
> >>
> >> ---
> >> Roger Quadros (5):
> >>  OMAP: RX51: Add LCD Panel support
> >>  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
> >>  OMAP: RX51: Add Touch Controller in SPI board info
> >>  OMAP: DSS2: Add ACX565AKM Panel Driver
> >>  OMAP: RX51: Update board defconfig
> >>
> >>  arch/arm/configs/rx51_defconfig                |   39 ++-
> >>  arch/arm/mach-omap2/Makefile                   |    1 +
> >>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
> >>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
> >>  arch/arm/mach-omap2/board-rx51.c               |    2 +
> >>  drivers/video/omap2/displays/Kconfig           |    6 +
> >>  drivers/video/omap2/displays/Makefile          |    1 +
> >>  drivers/video/omap2/displays/panel-acx565akm.c |  819
> >> ++++++++++++++++++++++++
> >>  8 files changed, 1017 insertions(+), 1 deletions(-)
> >>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
> >>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>
> >
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Tomi Valkeinen]

On Thu, 2010-04-15 at 16:00 +0200, ext Grazvydas Ignotas wrote:
> Something's strange with Tomi's mail path I guess, I always send
> patches with git send-email and he still received some of them (but
> not all) mangled.

Ahm, it could then be the infamous Nokia mailserver, which I think
Microsoft has designed to mangle linux patches...

It's strange that it happens only sometimes.

 Tomi

> 
> On Thu, Apr 15, 2010 at 3:08 PM, Roger Quadros <roger.quadros@nokia.com> wrote:
> > Tarball attached in case checkpatch complains.
> >
> > -roger
> >
> > Quadros Roger (Nokia-D/Helsinki) wrote:
> >>
> >> Tomi,
> >>
> >> Resending the patchset.
> >>
> >> Checkpatch was not complaining at my end. Probably the mail server is
> >> mangling the patches. I will send a tarball separately.
> >>
> >> The only change in this version is that i've put the Video memory
> >> initialization code in the board file.
> >>
> >> The TSC2005 stuff is still thereas without it panel is not detected.
> >> The merge conflict with TSC2005 patches if happens is very trivial to
> >> resolve.
> >>
> >>
> >> regards,
> >> -roger
> >>
> >> These patches get the N900 LCD panel working.
> >> Applys cleanly on 2.6.34-rc3
> >>
> >> Changes since v2:
> >> -Added Video mem init in board file
> >> Changes since v1:
> >> -Added Backlight control
> >>
> >> Pre-requisites:
> >> https://patchwork.kernel.org/patch/86318/
> >> https://patchwork.kernel.org/patch/86319/
> >> https://patchwork.kernel.org/patch/86320/
> >>
> >> ---
> >> Roger Quadros (5):
> >>  OMAP: RX51: Add LCD Panel support
> >>  OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
> >>  OMAP: RX51: Add Touch Controller in SPI board info
> >>  OMAP: DSS2: Add ACX565AKM Panel Driver
> >>  OMAP: RX51: Update board defconfig
> >>
> >>  arch/arm/configs/rx51_defconfig                |   39 ++-
> >>  arch/arm/mach-omap2/Makefile                   |    1 +
> >>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
> >>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
> >>  arch/arm/mach-omap2/board-rx51.c               |    2 +
> >>  drivers/video/omap2/displays/Kconfig           |    6 +
> >>  drivers/video/omap2/displays/Makefile          |    1 +
> >>  drivers/video/omap2/displays/panel-acx565akm.c |  819
> >> ++++++++++++++++++++++++
> >>  8 files changed, 1017 insertions(+), 1 deletions(-)
> >>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
> >>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>
> >
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Hi Tomi,

Quadros Roger (Nokia-D/Helsinki) wrote:
> Tomi,
> 
> Resending the patchset.
> 
> Checkpatch was not complaining at my end. Probably the mail server is
> mangling the patches. I will send a tarball separately.
> 
> The only change in this version is that i've put the Video memory
> initialization code in the board file.
> 
> The TSC2005 stuff is still thereas without it panel is not detected.
> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> 

I don't see his patches in your git tree yet.
When do you plan to have this in?

cheers,
-roger
> 
> These patches get the N900 LCD panel working.
> Applys cleanly on 2.6.34-rc3
> 
> Changes since v2:
> -Added Video mem init in board file
> Changes since v1:
> -Added Backlight control
> 
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
> 
> ---
> Roger Quadros (5):
>   OMAP: RX51: Add LCD Panel support
>   OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>   OMAP: RX51: Add Touch Controller in SPI board info
>   OMAP: DSS2: Add ACX565AKM Panel Driver
>   OMAP: RX51: Update board defconfig
> 
>  arch/arm/configs/rx51_defconfig                |   39 ++-
>  arch/arm/mach-omap2/Makefile                   |    1 +
>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>  drivers/video/omap2/displays/Kconfig           |    6 +
>  drivers/video/omap2/displays/Makefile          |    1 +
>  drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
>  8 files changed, 1017 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Hi Tomi,

Quadros Roger (Nokia-D/Helsinki) wrote:
> Tomi,
> 
> Resending the patchset.
> 
> Checkpatch was not complaining at my end. Probably the mail server is
> mangling the patches. I will send a tarball separately.
> 
> The only change in this version is that i've put the Video memory
> initialization code in the board file.
> 
> The TSC2005 stuff is still thereas without it panel is not detected.
> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> 

I don't see his patches in your git tree yet.
When do you plan to have this in?

cheers,
-roger
> 
> These patches get the N900 LCD panel working.
> Applys cleanly on 2.6.34-rc3
> 
> Changes since v2:
> -Added Video mem init in board file
> Changes since v1:
> -Added Backlight control
> 
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
> 
> ---
> Roger Quadros (5):
>   OMAP: RX51: Add LCD Panel support
>   OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>   OMAP: RX51: Add Touch Controller in SPI board info
>   OMAP: DSS2: Add ACX565AKM Panel Driver
>   OMAP: RX51: Update board defconfig
> 
>  arch/arm/configs/rx51_defconfig                |   39 ++-
>  arch/arm/mach-omap2/Makefile                   |    1 +
>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>  arch/arm/mach-omap2/board-rx51-video.c         |  107 +++
>  arch/arm/mach-omap2/board-rx51.c               |    2 +
>  drivers/video/omap2/displays/Kconfig           |    6 +
>  drivers/video/omap2/displays/Makefile          |    1 +
>  drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
>  8 files changed, 1017 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Tomi Valkeinen]

On Tue, 2010-04-20 at 14:53 +0200, Quadros Roger (Nokia-D/Helsinki)
wrote:
> Hi Tomi,
> 
> Quadros Roger (Nokia-D/Helsinki) wrote:
> > Tomi,
> > 
> > Resending the patchset.
> > 
> > Checkpatch was not complaining at my end. Probably the mail server is
> > mangling the patches. I will send a tarball separately.
> > 
> > The only change in this version is that i've put the Video memory
> > initialization code in the board file.
> > 
> > The TSC2005 stuff is still thereas without it panel is not detected.
> > The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> > 
> 
> I don't see his patches in your git tree yet.
> When do you plan to have this in?

I pushed them to master branch.

I need to find some time to go through them a bit better before moving
them to for-next branch.

 Tomi

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Tomi Valkeinen]

On Tue, 2010-04-20 at 14:53 +0200, Quadros Roger (Nokia-D/Helsinki)
wrote:
> Hi Tomi,
> 
> Quadros Roger (Nokia-D/Helsinki) wrote:
> > Tomi,
> > 
> > Resending the patchset.
> > 
> > Checkpatch was not complaining at my end. Probably the mail server is
> > mangling the patches. I will send a tarball separately.
> > 
> > The only change in this version is that i've put the Video memory
> > initialization code in the board file.
> > 
> > The TSC2005 stuff is still thereas without it panel is not detected.
> > The merge conflict with TSC2005 patches if happens is very trivial to resolve.
> > 
> 
> I don't see his patches in your git tree yet.
> When do you plan to have this in?

I pushed them to master branch.

I need to find some time to go through them a bit better before moving
them to for-next branch.

 Tomi

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Valkeinen Tomi (Nokia-D/Helsinki) wrote:
> On Tue, 2010-04-20 at 14:53 +0200, Quadros Roger (Nokia-D/Helsinki)
> wrote:
>> Hi Tomi,
>>
>> Quadros Roger (Nokia-D/Helsinki) wrote:
>>> Tomi,
>>>
>>> Resending the patchset.
>>>
>>> Checkpatch was not complaining at my end. Probably the mail server is
>>> mangling the patches. I will send a tarball separately.
>>>
>>> The only change in this version is that i've put the Video memory
>>> initialization code in the board file.
>>>
>>> The TSC2005 stuff is still thereas without it panel is not detected.
>>> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
>>>
>> I don't see his patches in your git tree yet.
>> When do you plan to have this in?
> 
> I pushed them to master branch.
> 
Thanks.

> I need to find some time to go through them a bit better before moving
> them to for-next branch.
> 
sure. Let me know if any issues.

cheers,
-roger

Re: [PATCHv3 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Roger Quadros]

Valkeinen Tomi (Nokia-D/Helsinki) wrote:
> On Tue, 2010-04-20 at 14:53 +0200, Quadros Roger (Nokia-D/Helsinki)
> wrote:
>> Hi Tomi,
>>
>> Quadros Roger (Nokia-D/Helsinki) wrote:
>>> Tomi,
>>>
>>> Resending the patchset.
>>>
>>> Checkpatch was not complaining at my end. Probably the mail server is
>>> mangling the patches. I will send a tarball separately.
>>>
>>> The only change in this version is that i've put the Video memory
>>> initialization code in the board file.
>>>
>>> The TSC2005 stuff is still thereas without it panel is not detected.
>>> The merge conflict with TSC2005 patches if happens is very trivial to resolve.
>>>
>> I don't see his patches in your git tree yet.
>> When do you plan to have this in?
> 
> I pushed them to master branch.
> 
Thanks.

> I need to find some time to go through them a bit better before moving
> them to for-next branch.
> 
sure. Let me know if any issues.

cheers,
-roger