[REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[The Source]

This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. 
snd-usb-audio & Ko are loaded but to no good. alsamixer doesn't list the 
device and no device files in /dev/snd. Reverting back to 1.0.22.1 
solves the problem.
System: ASUS N51Vf laptop, OS: Fedora 12 2.6.31.12-174.2.3.fc12.x86_64

Re: [REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[Clemens Ladisch]

The Source wrote:
> This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23.
> snd-usb-audio & Ko are loaded but to no good. alsamixer doesn't list the
> device and no device files in /dev/snd.

When the driver doesn't attach, it should log some error message(s) to
the system log.


Regards,
Clemens

Re: [REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[The Source]

21.04.2010 10:53, Clemens Ladisch пишет:
> The Source wrote:
>
>> This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23.
>> snd-usb-audio&  Ko are loaded but to no good. alsamixer doesn't list the
>> device and no device files in /dev/snd.
>>
> When the driver doesn't attach, it should log some error message(s) to
> the system log.
>
>
> Regards,
> Clemens
>
>

usb 8-2: new full speed USB device using uhci_hcd and address 2
usb 8-2: New USB device found, idVendor=041e, idProduct=30d2
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: SB X-Fi Notebook
usb 8-2: Manufacturer: Creative Technology Ltd
usb 8-2: configuration #1 chosen from 1 choice
input: Creative Technology Ltd SB X-Fi Notebook as 
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11
generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device 
[Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3
input: Creative Technology Ltd SB X-Fi Notebook as 
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12
generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard 
[Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4
ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, cannot set.
ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, cannot set.

P.S. Another strange glitch - with 1.0.23 strange things start to 
happen, for example, bash hust hangs on exit and system becomes slow.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[The Source]

21.04.2010 12:49, The Source пишет:
> 21.04.2010 10:53, Clemens Ladisch пишет:
>> The Source wrote:
>>
>>> This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23.
>>> snd-usb-audio&  Ko are loaded but to no good. alsamixer doesn't list 
>>> the
>>> device and no device files in /dev/snd.
>>>
>> When the driver doesn't attach, it should log some error message(s) to
>> the system log.
>>
>>
>> Regards,
>> Clemens
>>
>>
>
> usb 8-2: new full speed USB device using uhci_hcd and address 2
> usb 8-2: New USB device found, idVendor=041e, idProduct=30d2
> usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 8-2: Product: SB X-Fi Notebook
> usb 8-2: Manufacturer: Creative Technology Ltd
> usb 8-2: configuration #1 chosen from 1 choice
> input: Creative Technology Ltd SB X-Fi Notebook as 
> /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11
> generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device 
> [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3
> input: Creative Technology Ltd SB X-Fi Notebook as 
> /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12
> generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard 
> [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4
> ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, 
> cannot set.
> ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, 
> cannot set.
>
> P.S. Another strange glitch - with 1.0.23 strange things start to 
> happen, for example, bash hust hangs on exit and system becomes slow.
Ok, the glitch happens because after inserting the card and getting 
those dmesg messages modprobe never exits and eats 100% CPU.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [REGRESSION] SB X-Fi Notebook stopped working in 1.0.23

[The Source]

21.04.2010 12:52, The Source пишет:
> 21.04.2010 12:49, The Source пишет:
>> 21.04.2010 10:53, Clemens Ladisch пишет:
>>> The Source wrote:
>>>
>>>> This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23.
>>>> snd-usb-audio&  Ko are loaded but to no good. alsamixer doesn't 
>>>> list the
>>>> device and no device files in /dev/snd.
>>>>
>>> When the driver doesn't attach, it should log some error message(s) to
>>> the system log.
>>>
>>>
>>> Regards,
>>> Clemens
>>>
>>>
>>
>> usb 8-2: new full speed USB device using uhci_hcd and address 2
>> usb 8-2: New USB device found, idVendor=041e, idProduct=30d2
>> usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> usb 8-2: Product: SB X-Fi Notebook
>> usb 8-2: Manufacturer: Creative Technology Ltd
>> usb 8-2: configuration #1 chosen from 1 choice
>> input: Creative Technology Ltd SB X-Fi Notebook as 
>> /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11
>> generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device 
>> [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3
>> input: Creative Technology Ltd SB X-Fi Notebook as 
>> /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12
>> generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 
>> Keyboard [Creative Technology Ltd SB X-Fi Notebook] on 
>> usb-0000:00:1d.2-2/input4
>> ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, 
>> cannot set.
>> ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, 
>> cannot set.
>>
>> P.S. Another strange glitch - with 1.0.23 strange things start to 
>> happen, for example, bash hust hangs on exit and system becomes slow.
> Ok, the glitch happens because after inserting the card and getting 
> those dmesg messages modprobe never exits and eats 100% CPU.
And that's what dmesg says with 1.0.22.1 when the card works fine:

usb 8-2: Product: SB X-Fi Notebook
usb 8-2: Manufacturer: Creative Technology Ltd
usb 8-2: configuration #1 chosen from 1 choice
input: Creative Technology Ltd SB X-Fi Notebook as 
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11
generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device 
[Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3
input: Creative Technology Ltd SB X-Fi Notebook as 
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12
generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard 
[Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4
usbcore: registered new interface driver snd-usb-audio

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel