Problems connectring to an AP with Acer Aspire Revo

Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

Hi everyone,

I do have an... interesting... problem with my HTPC, an Intel Atom 230 +
Nvidia ION powered Acer Aspire Revo box.

By default it ships with an Atheros Mini PCI Express card. However,
since my experience with this card isn't the best (and it did not
connect to my access point with wither the Madwifi-NG or the ath9k
driver) I replaced it with an Intel WiFi Link 5100.

However, even with the new card, I could not make any kernel from 2.6.32
to 2.6.34 connect to any of my access points. Those are a Telekom DSL
router and a Juniper NetScreen 5GT Wireless. I tried WEP64, WPA, WPA2,
and even no encryption at all. My laptop with an Intel WiFi Link 5300
has no problems whatsoever in any of the modes.

The card is working for sure, if I put the 5100 in my laptop it works.
Also I feel it's not related to configuration or software - I took my
laptop's WiFi Link 5300 and the laptop HDD, and booted the HTPC up with
those - no connection to the AP possible.

I'm a bit at a loss here as what to try more. My access point doesn't
even see a packet, but there's no rfkill switch anywhere (it's a
stationary machine anyway).

Regards,
Christiam

Re: Problems connectring to an AP with Acer Aspire Revo

[reinette chatre]

On Sat, 2010-05-22 at 01:29 -0700, Christian P. Schmidt wrote:
> However, even with the new card, I could not make any kernel from 2.6.32
> to 2.6.34 connect to any of my access points. Those are a Telekom DSL
> router and a Juniper NetScreen 5GT Wireless. I tried WEP64, WPA, WPA2,
> and even no encryption at all. My laptop with an Intel WiFi Link 5300
> has no problems whatsoever in any of the modes.

Could you please post some logs captured during your association
attempts? Were there any errors in your logs? In addition to this,
having mac80211 verbose debugging enabled will help and also
wpa_supplicant logs. That will give us a place to start.

Reinette

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

On 05/24/2010 09:34 PM, reinette chatre wrote:
> On Sat, 2010-05-22 at 01:29 -0700, Christian P. Schmidt wrote:
>> However, even with the new card, I could not make any kernel from 2.6.32
>> to 2.6.34 connect to any of my access points. Those are a Telekom DSL
>> router and a Juniper NetScreen 5GT Wireless. I tried WEP64, WPA, WPA2,
>> and even no encryption at all. My laptop with an Intel WiFi Link 5300
>> has no problems whatsoever in any of the modes.
> 
> Could you please post some logs captured during your association
> attempts? Were there any errors in your logs? In addition to this,
> having mac80211 verbose debugging enabled will help and also
> wpa_supplicant logs. That will give us a place to start.
> 
> Reinette
> 

wpa_supplicant isn't particularly verbose:


Selected interface 'wlan0'

Interactive mode

> scan_r
bssid / frequency / signal level / flags / ssid
00:10:db:a1:69:21       2447    223
[WPA2-PSK-TKIP+CCMP-preauth][ESS]       digadd
00:10:db:a1:69:20       2447    214     [ESS]   test
<2>Authentication with 00:10:db:a1:69:21 timed out.
> <2>CTRL-EVENT-SCAN-RESULTS
> <2>Trying to associate with 00:10:db:a1:69:20 (SSID='test' freq=2447 MHz)
<2>Authentication with 00:10:db:a1:69:20 timed out.
<2>CTRL-EVENT-SCAN-RESULTS
> <2>Trying to associate with 00:10:db:a1:69:20 (SSID='test' freq=2447 MHz)
<2>Authentication with 00:10:db:a1:69:20 timed out.
<2>CTRL-EVENT-SCAN-RESULTS
> <2>Trying to associate with 00:10:db:a1:69:21 (SSID='digadd' freq=2447
MHz)
<2>Authentication with 00:10:db:a1:69:21 timed out.
> <2>CTRL-EVENT-SCAN-RESULTS
> <2>Trying to associate with 00:10:db:a1:69:21 (SSID='digadd' freq=2447
MHz)
<2>Authentication with 00:10:db:a1:69:21 timed out.

dmesg with verbose mac80211:

[66188.364996] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
in-tree:d
[66188.365474] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[66188.365839] iwlagn 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19
(level, low) -> IRQ 19
[66188.365855] iwlagn 0000:05:00.0: setting latency timer to 64
[66188.365909] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link
5100AGN REV=0x54
[66188.386206] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[66188.387527] iwlagn 0000:05:00.0: firmware: requesting
iwlwifi-5000-2.ucode
[66188.449118] iwlagn 0000:05:00.0: loaded firmware version 8.24.2.12
[66188.450753] phy1: Selected rate control algorithm 'iwl-agn-rs'
[66198.724027] phy1: device now idle
[66198.725051] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[66199.028356] phy1: device no longer idle - scanning
[66202.396651] phy1: device now idle
[66202.398713] phy1: device no longer idle - working
[66202.398733] wlan0: direct probe to 00:10:db:a1:69:21 (try 1)
[66202.598036] wlan0: direct probe to 00:10:db:a1:69:21 (try 2)
[66202.798041] wlan0: direct probe to 00:10:db:a1:69:21 (try 3)
[66202.998031] wlan0: direct probe to 00:10:db:a1:69:21 timed out
[66203.001034] phy1: device now idle
[66212.399658] phy1: device no longer idle - scanning
[66215.779131] phy1: device now idle
[66215.779591] phy1: device no longer idle - working
[66215.779607] wlan0: direct probe to 00:10:db:a1:69:21 (try 1)
[66215.979026] wlan0: direct probe to 00:10:db:a1:69:21 (try 2)
[66216.179027] wlan0: direct probe to 00:10:db:a1:69:21 (try 3)
[66216.379030] wlan0: direct probe to 00:10:db:a1:69:21 timed out
[66216.382034] phy1: device now idle
[66225.784782] phy1: device no longer idle - scanning
[66229.164447] phy1: device now idle
[66229.164848] phy1: device no longer idle - working
[66229.164864] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
[66229.364034] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
[66229.564030] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
[66229.764027] wlan0: direct probe to 00:10:db:a1:69:20 timed out
[66229.767035] phy1: device now idle
[66239.165261] phy1: device no longer idle - scanning
[66242.537751] phy1: device now idle
[66242.538524] phy1: device no longer idle - working
[66242.538545] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
[66242.738028] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
[66242.938033] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
[66243.138029] wlan0: direct probe to 00:10:db:a1:69:20 timed out
[66243.142031] phy1: device now idle

I kind of feel that no packets are sent, since I can't see them on the
firewall, even with packet dumps, not even association attempts.

Running tcpdump on the client doesn't show anything either, but I'm not
sure whether it would normally capture association attempts.

Regards,
Christian

Re: Problems connectring to an AP with Acer Aspire Revo

[reinette chatre]

Hi Christian,

On Wed, 2010-05-26 at 06:14 -0700, Christian P. Schmidt wrote:
> On 05/24/2010 09:34 PM, reinette chatre wrote:
> > On Sat, 2010-05-22 at 01:29 -0700, Christian P. Schmidt wrote:
> >> However, even with the new card, I could not make any kernel from 2.6.32
> >> to 2.6.34 connect to any of my access points. Those are a Telekom DSL
> >> router and a Juniper NetScreen 5GT Wireless. I tried WEP64, WPA, WPA2,
> >> and even no encryption at all. My laptop with an Intel WiFi Link 5300
> >> has no problems whatsoever in any of the modes.
> > 
> > Could you please post some logs captured during your association
> > attempts? Were there any errors in your logs? In addition to this,
> > having mac80211 verbose debugging enabled will help and also
> > wpa_supplicant logs. That will give us a place to start.
> > 
> > Reinette
> > 
> 
> wpa_supplicant isn't particularly verbose:

It does become verbose when you enable debugging. Next time you need to
do this then you can try the "-dddt" option. Not right now though since
we can focus on the driver and mac80211 logs for now.

> [66242.538545] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
> [66242.738028] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
> [66242.938033] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
> [66243.138029] wlan0: direct probe to 00:10:db:a1:69:20 timed out
> [66243.142031] phy1: device now idle
> 
> I kind of feel that no packets are sent, since I can't see them on the
> firewall, even with packet dumps, not even association attempts.

We can look into this more by enabling TX debugging and general
debugging. Could you please reload driver with "modprobe iwlagn
debug=0x40843fff" and rerun your test?

Reinette

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

[-- Attachment #1: Type: text/plain, Size: 2127 bytes --]

On 05/28/2010 01:31 AM, reinette chatre wrote:
> Hi Christian,
> 
> On Wed, 2010-05-26 at 06:14 -0700, Christian P. Schmidt wrote:
>> On 05/24/2010 09:34 PM, reinette chatre wrote:
>>> On Sat, 2010-05-22 at 01:29 -0700, Christian P. Schmidt wrote:
>>>> However, even with the new card, I could not make any kernel from 2.6.32
>>>> to 2.6.34 connect to any of my access points. Those are a Telekom DSL
>>>> router and a Juniper NetScreen 5GT Wireless. I tried WEP64, WPA, WPA2,
>>>> and even no encryption at all. My laptop with an Intel WiFi Link 5300
>>>> has no problems whatsoever in any of the modes.
>>>
>>> Could you please post some logs captured during your association
>>> attempts? Were there any errors in your logs? In addition to this,
>>> having mac80211 verbose debugging enabled will help and also
>>> wpa_supplicant logs. That will give us a place to start.
>>>
>>> Reinette
>>>
>>
>> wpa_supplicant isn't particularly verbose:
> 
> It does become verbose when you enable debugging. Next time you need to
> do this then you can try the "-dddt" option. Not right now though since
> we can focus on the driver and mac80211 logs for now.
> 
>> [66242.538545] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
>> [66242.738028] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
>> [66242.938033] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
>> [66243.138029] wlan0: direct probe to 00:10:db:a1:69:20 timed out
>> [66243.142031] phy1: device now idle
>>
>> I kind of feel that no packets are sent, since I can't see them on the
>> firewall, even with packet dumps, not even association attempts.
> 
> We can look into this more by enabling TX debugging and general
> debugging. Could you please reload driver with "modprobe iwlagn
> debug=0x40843fff" and rerun your test?

I've attached two files, first the card init, second a full association
attempt to both access points (encrypted & open).

After looking up the specs for the mini pci express port I'm gonna
disassemble the HTPC tonight and will figure out if that thing asserts
the RFKILL signal... even though there's no RFKILL switch.

Regards,
Christian

[-- Attachment #2: init.txt --]
[-- Type: text/plain, Size: 76795 bytes --]

[223027.408314] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[223027.408323] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[223027.408440] ieee80211 phy2: U iwl_pci_probe *** LOAD DRIVER ***
[223027.408482] iwlagn 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
[223027.408501] iwlagn 0000:05:00.0: setting latency timer to 64
[223027.408558] ieee80211 phy2: U iwl_pci_probe pci_resource_len = 0x00002000
[223027.408568] ieee80211 phy2: U iwl_pci_probe pci_resource_base = ffffc9000006c000
[223027.408584] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[223027.408596] ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter 
[223027.408608] ieee80211 phy2: U iwl_set_hw_ready hardware ready
[223027.408619] ieee80211 phy2: U iwl_eeprom_init NVM size = 2048
[223027.408629] ieee80211 phy2: U iwl_apm_init Init card's basic functions
[223027.408670] ieee80211 phy2: U iwl_apm_init L1 Disabled; Enabling L0S
[223027.411589] ieee80211 phy2: U iwlcore_eeprom_verify_signature EEPROM signature=0x00000004
[223027.429238] ieee80211 phy2: U iwl_apm_stop Stop card, put in low power state
[223027.429251] ieee80211 phy2: U iwl_apm_stop_master stop master
[223027.429275] ieee80211 phy2: U iwl_pci_probe MAC address: 00:21:6b:54:60:52
[223027.429290] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223027.429297] ieee80211 phy2: U iwl_init_channel_map Initializing regulatory info from EEPROM
[223027.429304] ieee80211 phy2: U iwl_init_channel_map Parsing data for 56 channels.
[223027.429322] ieee80211 phy2: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429331] ieee80211 phy2: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429340] ieee80211 phy2: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429349] ieee80211 phy2: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429358] ieee80211 phy2: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429366] ieee80211 phy2: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429375] ieee80211 phy2: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429384] ieee80211 phy2: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429392] ieee80211 phy2: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429401] ieee80211 phy2: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429410] ieee80211 phy2: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429419] ieee80211 phy2: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.429427] ieee80211 phy2: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.429434] ieee80211 phy2: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
[223027.429441] ieee80211 phy2: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
[223027.429447] ieee80211 phy2: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
[223027.429454] ieee80211 phy2: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
[223027.429460] ieee80211 phy2: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
[223027.429466] ieee80211 phy2: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
[223027.429472] ieee80211 phy2: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
[223027.429479] ieee80211 phy2: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
[223027.429485] ieee80211 phy2: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
[223027.429491] ieee80211 phy2: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
[223027.429498] ieee80211 phy2: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
[223027.429504] ieee80211 phy2: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
[223027.429510] ieee80211 phy2: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
[223027.429517] ieee80211 phy2: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
[223027.429523] ieee80211 phy2: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
[223027.429531] ieee80211 phy2: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 14dBm): Ad-Hoc not supported
[223027.429538] ieee80211 phy2: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
[223027.429546] ieee80211 phy2: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[223027.429553] ieee80211 phy2: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
[223027.429561] ieee80211 phy2: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[223027.429568] ieee80211 phy2: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
[223027.429576] ieee80211 phy2: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[223027.429584] ieee80211 phy2: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429593] ieee80211 phy2: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429602] ieee80211 phy2: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429610] ieee80211 phy2: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429619] ieee80211 phy2: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429628] ieee80211 phy2: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429637] ieee80211 phy2: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429646] ieee80211 phy2: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429654] ieee80211 phy2: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429663] ieee80211 phy2: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429672] ieee80211 phy2: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429681] ieee80211 phy2: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429689] ieee80211 phy2: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429698] ieee80211 phy2: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429707] ieee80211 phy2: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429714] ieee80211 phy2: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
[223027.429722] ieee80211 phy2: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[223027.429731] ieee80211 phy2: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[223027.429739] ieee80211 phy2: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[223027.429748] ieee80211 phy2: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[223027.429757] ieee80211 phy2: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xa1 15dBm): Ad-Hoc not supported
[223027.429766] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 10dBm): Ad-Hoc supported
[223027.429775] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 10dBm): Ad-Hoc supported
[223027.429784] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429792] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429801] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429810] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429818] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429827] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429835] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429844] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429853] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429861] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 15dBm): Ad-Hoc supported
[223027.429870] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 13dBm): Ad-Hoc supported
[223027.429879] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 13dBm): Ad-Hoc supported
[223027.429888] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 10dBm): Ad-Hoc not supported
[223027.429896] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 10dBm): Ad-Hoc not supported
[223027.429905] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[223027.429914] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 15dBm): Ad-Hoc not supported
[223027.429922] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429931] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429940] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 10dBm): Ad-Hoc not supported
[223027.429948] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 10dBm): Ad-Hoc not supported
[223027.429957] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429966] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429975] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429984] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.429992] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.430001] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.431169] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.431180] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.431190] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.431201] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 15dBm): Ad-Hoc not supported
[223027.431212] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.431222] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.431232] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.431242] ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 15dBm): Ad-Hoc not supported
[223027.431266] ieee80211 phy2: U iwlcore_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=0x20
[223027.431277] ieee80211 phy2: U iwlcore_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=0x20
[223027.431286] ieee80211 phy2: U iwlcore_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=0x20
[223027.431295] ieee80211 phy2: U iwlcore_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=0x20
[223027.431304] ieee80211 phy2: U iwlcore_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=0x0
[223027.431312] ieee80211 phy2: U iwlcore_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=0x0
[223027.431321] ieee80211 phy2: U iwlcore_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=0x0
[223027.431330] ieee80211 phy2: U iwlcore_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=0x10
[223027.431338] ieee80211 phy2: U iwlcore_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=0x10
[223027.431346] ieee80211 phy2: U iwlcore_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=0x10
[223027.431354] ieee80211 phy2: U iwlcore_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=0x10
[223027.431362] ieee80211 phy2: U iwlcore_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=0x36
[223027.431370] ieee80211 phy2: U iwlcore_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=0x36
[223027.431379] ieee80211 phy2: U iwlcore_init_geos Channel 36 Freq=5180[5.2GHz] valid flag=0x26
[223027.431387] ieee80211 phy2: U iwlcore_init_geos Channel 40 Freq=5200[5.2GHz] valid flag=0x16
[223027.431395] ieee80211 phy2: U iwlcore_init_geos Channel 44 Freq=5220[5.2GHz] valid flag=0x26
[223027.431403] ieee80211 phy2: U iwlcore_init_geos Channel 48 Freq=5240[5.2GHz] valid flag=0x16
[223027.431412] ieee80211 phy2: U iwlcore_init_geos Channel 52 Freq=5260[5.2GHz] valid flag=0x2E
[223027.431420] ieee80211 phy2: U iwlcore_init_geos Channel 56 Freq=5280[5.2GHz] valid flag=0x1E
[223027.431428] ieee80211 phy2: U iwlcore_init_geos Channel 60 Freq=5300[5.2GHz] valid flag=0x2E
[223027.431436] ieee80211 phy2: U iwlcore_init_geos Channel 64 Freq=5320[5.2GHz] valid flag=0x1E
[223027.431444] ieee80211 phy2: U iwlcore_init_geos Channel 100 Freq=5500[5.2GHz] valid flag=0x2E
[223027.431452] ieee80211 phy2: U iwlcore_init_geos Channel 104 Freq=5520[5.2GHz] valid flag=0x1E
[223027.431460] ieee80211 phy2: U iwlcore_init_geos Channel 108 Freq=5540[5.2GHz] valid flag=0x2E
[223027.431468] ieee80211 phy2: U iwlcore_init_geos Channel 112 Freq=5560[5.2GHz] valid flag=0x1E
[223027.431476] ieee80211 phy2: U iwlcore_init_geos Channel 116 Freq=5580[5.2GHz] valid flag=0x2E
[223027.431484] ieee80211 phy2: U iwlcore_init_geos Channel 120 Freq=5600[5.2GHz] valid flag=0x1E
[223027.431492] ieee80211 phy2: U iwlcore_init_geos Channel 124 Freq=5620[5.2GHz] valid flag=0x2E
[223027.431500] ieee80211 phy2: U iwlcore_init_geos Channel 128 Freq=5640[5.2GHz] valid flag=0x1E
[223027.431508] ieee80211 phy2: U iwlcore_init_geos Channel 132 Freq=5660[5.2GHz] valid flag=0x2E
[223027.431516] ieee80211 phy2: U iwlcore_init_geos Channel 136 Freq=5680[5.2GHz] valid flag=0x1E
[223027.431525] ieee80211 phy2: U iwlcore_init_geos Channel 140 Freq=5700[5.2GHz] valid flag=0x3E
[223027.431533] ieee80211 phy2: U iwlcore_init_geos Channel 149 Freq=5745[5.2GHz] valid flag=0x26
[223027.431541] ieee80211 phy2: U iwlcore_init_geos Channel 153 Freq=5765[5.2GHz] valid flag=0x16
[223027.431549] ieee80211 phy2: U iwlcore_init_geos Channel 157 Freq=5785[5.2GHz] valid flag=0x26
[223027.431557] ieee80211 phy2: U iwlcore_init_geos Channel 161 Freq=5805[5.2GHz] valid flag=0x16
[223027.431565] ieee80211 phy2: U iwlcore_init_geos Channel 165 Freq=5825[5.2GHz] valid flag=0x36
[223027.431573] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[223027.431780] ieee80211 phy2: U iwl_tt_initialize Initialize Thermal Throttling 
[223027.431788] ieee80211 phy2: U iwl_tt_initialize Legacy Thermal Throttling
[223027.431797] ieee80211 phy2: U iwl_request_firmware attempting to load firmware 'iwlwifi-5000-2.ucode'
[223027.433431] iwlagn 0000:05:00.0: firmware: requesting iwlwifi-5000-2.ucode
[223027.496487] ieee80211 phy2: U iwl_ucode_callback Loaded firmware file 'iwlwifi-5000-2.ucode' (353240 bytes).
[223027.496502] iwlagn 0000:05:00.0: loaded firmware version 8.24.2.12
[223027.496514] ieee80211 phy2: U iwl_ucode_callback NVM Type: EEPROM, version: 0x11f
[223027.496522] ieee80211 phy2: U iwl_ucode_callback f/w package hdr ucode version raw = 0x818020c
[223027.496532] ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime inst size = 130700
[223027.496541] ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime data size = 49152
[223027.496550] ieee80211 phy2: U iwl_ucode_callback f/w package hdr init inst size = 124212
[223027.496559] ieee80211 phy2: U iwl_ucode_callback f/w package hdr init data size = 49152
[223027.496567] ieee80211 phy2: U iwl_ucode_callback f/w package hdr boot inst size = 0
[223027.496858] ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode instr len 130700
[223027.497009] ieee80211 phy2: U iwl_ucode_callback uCode instr buf vaddr = 0xffff88004e8a0000, paddr = 0x4e8a0000
[223027.497021] ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode data len 49152
[223027.497114] ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init instr len 124212
[223027.497312] ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init data len 49152
[223027.497373] ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) boot instr len 0
[223027.501073] phy2: Selected rate control algorithm 'iwl-agn-rs'
[223169.217906] ieee80211 phy2: U iwl_mac_start enter
[223169.217916] ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter 
[223169.217928] ieee80211 phy2: U iwl_set_hw_ready hardware ready
[223169.217937] ieee80211 phy2: U iwl_apm_init Init card's basic functions
[223169.217975] ieee80211 phy2: U iwl_apm_init L1 Disabled; Enabling L0S
[223169.225105] ieee80211 phy2: U iwl5000_load_ucode Init ucode found. Loading init ucode...
[223169.225643] ieee80211 phy2: U iwl5000_load_section INST uCode section being loaded...
[223169.229239] ieee80211 phy2: U iwl5000_load_section DATA uCode section being loaded...
[223169.231931] ieee80211 phy2: U iwl5000_load_ucode Init ucode load complete.
[223169.231940] ieee80211 phy2: U __iwl_up iwlagn is coming up
[223169.231946] ieee80211 phy2: U iwl_mac_start Start UP work done.
[223169.240204] ieee80211 phy2: I iwl_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
[223169.240211] ieee80211 phy2: I iwl_rx_reply_alive Initialization Alive received.
[223169.245026] ieee80211 phy2: U iwlcore_verify_inst_sparse ucode inst image size is 0
[223169.245033] ieee80211 phy2: U iwl_verify_ucode Bootstrap uCode is good in inst SRAM
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 0 on AC 3
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 1 on AC 2
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 2 on AC 1
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 3 on AC 0
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 4 on AC 7
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 5 on AC 5
[223169.246012] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 6 on AC 6
[223169.247333] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
[223169.247343] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD 
[223169.247358] ieee80211 phy2: U iwl_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0400, 72 bytes at 0[0]:4
[223169.247403] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD 
[223169.247426] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.247435] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.247447] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4401, 12 bytes at 1[32]:4
[223169.247509] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.247526] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
[223169.247534] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD 
[223169.247545] ieee80211 phy2: U iwl_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x0402, 96 bytes at 2[2]:4
[223169.247594] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD 
[223169.322584] ieee80211 phy2: I iwl5000_rx_calib_complete Init. calibration is completed, restarting fw.
[223169.322612] ieee80211 phy2: U __iwl_down iwlagn is going down
[223169.332406] ieee80211 phy2: U iwl_apm_stop Stop card, put in low power state
[223169.332419] ieee80211 phy2: U iwl_apm_stop_master stop master
[223169.332440] ieee80211 phy2: U iwl_clear_free_frames 0 frames on pre-allocated heap on clear.
[223169.332450] ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter 
[223169.332461] ieee80211 phy2: U iwl_set_hw_ready hardware ready
[223169.332469] ieee80211 phy2: U iwl_apm_init Init card's basic functions
[223169.332508] ieee80211 phy2: U iwl_apm_init L1 Disabled; Enabling L0S
[223169.336443] ieee80211 phy2: U iwl5000_load_ucode Init ucode not found, or already loaded. Loading runtime ucode...
[223169.336510] ieee80211 phy2: U iwl5000_load_section INST uCode section being loaded...
[223169.340198] ieee80211 phy2: U iwl5000_load_section DATA uCode section being loaded...
[223169.342893] ieee80211 phy2: U iwl5000_load_ucode Runtime ucode load complete.
[223169.342903] ieee80211 phy2: U __iwl_up iwlagn is coming up
[223169.351170] ieee80211 phy2: I iwl_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
[223169.351177] ieee80211 phy2: I iwl_rx_reply_alive Runtime Alive received.
[223169.356032] ieee80211 phy2: U iwl_alive_start Runtime Alive received.
[223169.356041] ieee80211 phy2: U iwlcore_verify_inst_sparse ucode inst image size is 0
[223169.356047] ieee80211 phy2: U iwl_verify_ucode Bootstrap uCode is good in inst SRAM
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 0 on AC 3
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 1 on AC 2
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 2 on AC 1
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 3 on AC 0
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 4 on AC 7
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 5 on AC 5
[223169.357015] ieee80211 phy2: U iwl5000_tx_queue_set_status Activate AC Queue 6 on AC 6
[223169.358345] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
[223169.358356] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD 
[223169.358371] ieee80211 phy2: U iwl_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0400, 72 bytes at 0[0]:4
[223169.358414] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD 
[223169.358434] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.358443] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358455] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4401, 12 bytes at 1[32]:4
[223169.358518] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358538] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.358547] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358560] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4402, 512 bytes at 2[32]:4
[223169.358605] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358625] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.358633] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358646] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4403, 92 bytes at 3[32]:4
[223169.358692] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358711] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.358720] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358732] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4404, 52 bytes at 4[32]:4
[223169.358770] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358789] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
[223169.358798] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358810] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x4405, 12 bytes at 5[32]:4
[223169.358845] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD 
[223169.358879] ieee80211 phy2: U iwl5000_send_tx_ant_config select valid tx ant: 2
[223169.358887] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command TX_ANT_CONFIGURATION_CMD
[223169.358896] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD 
[223169.358907] ieee80211 phy2: U iwl_enqueue_hcmd Sending command TX_ANT_CONFIGURATION_CMD (#98), seq: 0x0406, 8 bytes at 6[6]:4
[223169.358942] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD 
[223169.358966] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223169.358974] ieee80211 phy2: U iwl_send_bt_config BT coex active
[223169.358981] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_BT_CONFIG
[223169.358989] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_BT_CONFIG 
[223169.359000] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0407, 16 bytes at 7[7]:4
[223169.359035] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_CONFIG 
[223169.359059] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0408, 8 bytes at 8[8]:4
[223169.359074] ieee80211 phy2: U iwl_commit_rxon Sending RXON
[223169.359077] * without RXON_FILTER_ASSOC_MSK
[223169.359080] * channel = 1
[223169.359082] * bssid = 00:00:00:00:00:00
[223169.359090] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[223169.359097] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[223169.359110] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0409, 54 bytes at 9[9]:4
[223169.359117] ieee80211 phy2: I iwl_tt_handler Queueing thermal throttling work.
[223169.359127] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_STATISTICS_CMD (0x00000000)
[223169.360419] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[223169.360455] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x040A, 4 bytes at 10[10]:4
[223169.360462] ieee80211 phy2: I iwl_tt_handler Queueing thermal throttling work.
[223169.360481] ieee80211 phy2: U iwl_add_bcast_station Adding broadcast station to station table
[223169.360493] ieee80211 phy2: U iwl_add_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[223169.360504] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[223169.360513] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.360526] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x040B, 96 bytes at 11[11]:4
[223169.361184] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223169.361202] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.361220] ieee80211 phy2: U iwl_process_add_sta_resp Processing response for adding station 15
[223169.361228] ieee80211 phy2: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[223169.361237] ieee80211 phy2: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[223169.361246] ieee80211 phy2: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[223169.361253] ieee80211 phy2: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[223169.361270] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x040C, 92 bytes at 12[12]:4
[223169.361280] ieee80211 phy2: U iwl_print_rx_config_cmd RX CONFIG:
[223169.361291] iwl data: 00000000: 00 21 6b 54 60 52 00 00 00 00 00 00 00 00 00 00  .!kT`R..........
[223169.361301] iwl data: 00000010: 00 21 6b 54 60 52 00 00 03 00 06 24 ff 0f 00 00  .!kT`R.....$....
[223169.361310] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00  ................
[223169.361318] iwl data: 00000030: 00 00                                            ..
[223169.361325] ieee80211 phy2: U iwl_print_rx_config_cmd u16 channel: 0x1
[223169.361333] ieee80211 phy2: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[223169.361340] ieee80211 phy2: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[223169.361346] ieee80211 phy2: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[223169.361353] ieee80211 phy2: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[223169.361359] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_LINK_QUALITY_CMD (0x00000000)
[223169.361367] ieee80211 phy2: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[223169.361375] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:6b:54:60:52
[223169.361383] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[223169.361390] ieee80211 phy2: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[223169.361402] ieee80211 phy2: U iwl_enqueue_hcmd Sending command SENSITIVITY_CMD (#a8), seq: 0x040D, 28 bytes at 13[13]:4
[223169.361413] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_CT_KILL_CONFIG_CMD
[223169.361420] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD 
[223169.361431] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_CT_KILL_CONFIG_CMD (#a4), seq: 0x040E, 16 bytes at 14[14]:4
[223169.361448] ieee80211 phy2: I iwl_generic_cmd_callback back from SENSITIVITY_CMD (0x00000000)
[223169.361471] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD 
[223169.361492] ieee80211 phy2: U iwl_rf_kill_ct_config REPLY_CT_KILL_CONFIG_CMD succeeded, critical temperature is 110
[223169.361500] ieee80211 phy2: U iwl_alive_start ALIVE processing complete.
[223169.361516] ieee80211 phy2: U iwl_mac_start leave
[223169.361528] ieee80211 phy2: U iwl_mac_add_interface enter: type 2
[223169.361541] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223169.361548] ieee80211 phy2: U iwl_set_power Sending power/sleep command
[223169.361555] ieee80211 phy2: U iwl_set_power Flags value = 0x00000008
[223169.361562] ieee80211 phy2: U iwl_set_power Tx timeout = 0
[223169.361568] ieee80211 phy2: U iwl_set_power Rx timeout = 0
[223169.361575] ieee80211 phy2: U iwl_set_power Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
[223169.361583] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command POWER_TABLE_CMD
[223169.361591] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command POWER_TABLE_CMD 
[223169.361602] ieee80211 phy2: U iwl_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x040F, 40 bytes at 15[15]:4
[223169.361637] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command POWER_TABLE_CMD 
[223169.361656] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223169.361667] ieee80211 phy2: U iwl_commit_rxon Sending RXON
[223169.361670] * without RXON_FILTER_ASSOC_MSK
[223169.361673] * channel = 1
[223169.361675] * bssid = 00:00:00:00:00:00
[223169.361683] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[223169.361691] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[223169.361703] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0410, 54 bytes at 16[16]:4
[223169.361891] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[223169.361918] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0411, 4 bytes at 17[17]:4
[223169.361925] ieee80211 phy2: I iwl_tt_handler Queueing thermal throttling work.
[223169.361942] ieee80211 phy2: U iwl_add_bcast_station Adding broadcast station to station table
[223169.361953] ieee80211 phy2: U iwl_add_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[223169.361963] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[223169.361972] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.361986] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0412, 96 bytes at 18[18]:4
[223169.361993] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223169.362042] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.362060] ieee80211 phy2: U iwl_process_add_sta_resp Processing response for adding station 15
[223169.362069] ieee80211 phy2: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[223169.362079] ieee80211 phy2: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[223169.362090] ieee80211 phy2: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[223169.362100] ieee80211 phy2: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[223169.362118] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0413, 92 bytes at 19[19]:4
[223169.362143] ieee80211 phy2: U iwl_print_rx_config_cmd RX CONFIG:
[223169.362153] iwl data: 00000000: 00 21 6b 54 60 52 00 00 00 00 00 00 00 00 00 00  .!kT`R..........
[223169.362163] iwl data: 00000010: 00 21 6b 54 60 52 00 00 03 00 06 24 ff 0f 00 00  .!kT`R.....$....
[223169.362171] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_LINK_QUALITY_CMD (0x00000000)
[223169.362181] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00  ................
[223169.362190] iwl data: 00000030: 00 00                                            ..
[223169.362199] ieee80211 phy2: U iwl_print_rx_config_cmd u16 channel: 0x1
[223169.362208] ieee80211 phy2: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[223169.362216] ieee80211 phy2: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[223169.362224] ieee80211 phy2: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[223169.362231] ieee80211 phy2: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[223169.362238] ieee80211 phy2: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[223169.362247] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:6b:54:60:52
[223169.362255] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[223169.362264] ieee80211 phy2: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[223169.362279] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0414, 8 bytes at 20[20]:4
[223169.362304] ieee80211 phy2: U iwl_mac_add_interface Set 00:21:6b:54:60:52
[223169.362314] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223169.362325] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0415, 4 bytes at 21[21]:4
[223169.362342] ieee80211 phy2: U iwl_commit_rxon Sending RXON
[223169.362346] * without RXON_FILTER_ASSOC_MSK
[223169.362349] * channel = 1
[223169.362352] * bssid = 00:00:00:00:00:00
[223169.362358] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[223169.362365] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[223169.362376] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0416, 54 bytes at 22[22]:4
[223169.362400] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223169.362408] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223169.362559] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[223169.362585] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0417, 4 bytes at 23[23]:4
[223169.362600] ieee80211 phy2: U iwl_add_bcast_station Adding broadcast station to station table
[223169.362609] ieee80211 phy2: U iwl_add_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[223169.362617] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[223169.362624] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.362634] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0418, 96 bytes at 24[24]:4
[223169.362655] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223169.362705] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.362723] ieee80211 phy2: U iwl_process_add_sta_resp Processing response for adding station 15
[223169.362731] ieee80211 phy2: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[223169.362739] ieee80211 phy2: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[223169.362748] ieee80211 phy2: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[223169.362756] ieee80211 phy2: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[223169.362771] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0419, 92 bytes at 25[25]:4
[223169.362781] ieee80211 phy2: U iwl_print_rx_config_cmd RX CONFIG:
[223169.362788] iwl data: 00000000: 00 21 6b 54 60 52 00 00 00 00 00 00 00 00 00 00  .!kT`R..........
[223169.362796] iwl data: 00000010: 00 21 6b 54 60 52 00 00 03 00 06 24 ff 0f 00 00  .!kT`R.....$....
[223169.362804] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00  ................
[223169.362811] iwl data: 00000030: 00 00                                            ..
[223169.362818] ieee80211 phy2: U iwl_print_rx_config_cmd u16 channel: 0x1
[223169.362824] ieee80211 phy2: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[223169.362831] ieee80211 phy2: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[223169.362837] ieee80211 phy2: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[223169.362843] ieee80211 phy2: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0xff
[223169.362850] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_LINK_QUALITY_CMD (0x00000000)
[223169.362858] ieee80211 phy2: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
[223169.362865] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:6b:54:60:52
[223169.362872] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[223169.362879] ieee80211 phy2: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[223169.362890] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x041A, 8 bytes at 26[26]:4
[223169.362904] ieee80211 phy2: U iwl_mac_add_interface leave
[223169.362913] ieee80211 phy2: U iwl_bss_info_changed changes = 0xE
[223169.362922] ieee80211 phy2: U iwl_bss_info_changed ERP_PREAMBLE 0
[223169.362929] ieee80211 phy2: U iwl_bss_info_changed ERP_CTS 0
[223169.362935] ieee80211 phy2: U iwl_bss_info_changed leave
[223169.363102] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223169.364171] phy2: device now idle
[223169.364182] ieee80211 phy2: U iwl_mac_config enter to channel 1 changed 0xFFFFFFFF
[223169.364192] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223169.364202] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223169.364210] ieee80211 phy2: U iwl_mac_config TX Power old=15 new=15
[223169.364221] ieee80211 phy2: U iwl_commit_rxon Sending RXON
[223169.364224] * without RXON_FILTER_ASSOC_MSK
[223169.364228] * channel = 1
[223169.364230] * bssid = 00:00:00:00:00:00
[223169.364236] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[223169.364243] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[223169.364255] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x041B, 54 bytes at 27[27]:4
[223169.364460] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[223169.364481] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x041C, 4 bytes at 28[28]:4
[223169.364492] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 18, 0, 8, 0, 26, 2 mSecs
[223169.364500] ieee80211 phy2: U iwl_add_bcast_station Adding broadcast station to station table
[223169.364506] ieee80211 phy2: I iwl_force_reset perform force reset (0)
[223169.364514] ieee80211 phy2: U iwl_add_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[223169.364520] ieee80211 phy2: I iwl_force_rf_reset force reset rejected: not associated
[223169.364527] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[223169.364535] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.364546] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x041D, 96 bytes at 29[29]:4
[223169.364573] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223169.364599] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[223169.364615] ieee80211 phy2: U iwl_process_add_sta_resp Processing response for adding station 15
[223169.364622] ieee80211 phy2: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[223169.364629] ieee80211 phy2: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[223169.364637] ieee80211 phy2: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[223169.364645] ieee80211 phy2: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[223169.364660] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x041E, 92 bytes at 30[30]:4
[223169.364670] ieee80211 phy2: U iwl_print_rx_config_cmd RX CONFIG:
[223169.364678] iwl data: 00000000: 00 21 6b 54 60 52 00 00 00 00 00 00 00 00 00 00  .!kT`R..........
[223169.364687] iwl data: 00000010: 00 21 6b 54 60 52 00 00 03 00 06 24 15 03 00 00  .!kT`R.....$....
[223169.364696] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00  ................
[223169.364704] iwl data: 00000030: 00 00                                            ..
[223169.364711] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_LINK_QUALITY_CMD (0x00000000)
[223169.364720] ieee80211 phy2: U iwl_print_rx_config_cmd u16 channel: 0x1
[223169.364726] ieee80211 phy2: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[223169.364732] ieee80211 phy2: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[223169.364739] ieee80211 phy2: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[223169.364745] ieee80211 phy2: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[223169.364751] ieee80211 phy2: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[223169.364758] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:6b:54:60:52
[223169.364765] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[223169.364771] ieee80211 phy2: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[223169.364784] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x041F, 8 bytes at 31[31]:4
[223169.364796] ieee80211 phy2: U iwl_mac_config leave
[223169.364810] ieee80211 phy2: U iwl_mac_conf_tx enter
[223169.364817] ieee80211 phy2: U iwl_mac_conf_tx leave
[223169.364823] ieee80211 phy2: U iwl_mac_conf_tx enter
[223169.364830] ieee80211 phy2: U iwl_mac_conf_tx leave
[223169.364838] ieee80211 phy2: U iwl_mac_conf_tx enter
[223169.364845] ieee80211 phy2: U iwl_mac_conf_tx leave
[223169.364852] ieee80211 phy2: U iwl_mac_conf_tx enter
[223169.364859] ieee80211 phy2: U iwl_mac_conf_tx leave
[223169.364899] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223169.364908] ieee80211 phy2: U iwl_configure_filter Enter: changed: 0x0, total: 0x80000000
[223169.364942] ieee80211 phy2: U iwl_configure_filter Enter: changed: 0x0, total: 0x80000000
[223169.365114] ieee80211 phy2: U iwl_configure_filter Enter: changed: 0x0, total: 0x80000000
[223169.365945] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[223169.474563] phy2: device no longer idle - scanning
[223169.474576] ieee80211 phy2: U iwl_mac_config enter to channel 1 changed 0x100
[223169.474584] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223169.474590] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223169.474596] ieee80211 phy2: U iwl_mac_config leave
[223169.474603] ieee80211 phy2: U iwl_mac_hw_scan enter
[223169.474609] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223169.474621] ieee80211 phy2: U iwl_mac_hw_scan leave
[223169.474640] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223169.474653] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=1 prob=0x1 [ACTIVE 33]
[223169.474664] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=2 prob=0x1 [ACTIVE 33]
[223169.474673] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=3 prob=0x1 [ACTIVE 33]
[223169.474682] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=4 prob=0x1 [ACTIVE 33]
[223169.474689] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=5 prob=0x1 [ACTIVE 33]
[223169.474696] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=6 prob=0x1 [ACTIVE 33]
[223169.474702] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=7 prob=0x1 [ACTIVE 33]
[223169.474709] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=8 prob=0x1 [ACTIVE 33]
[223169.474716] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=9 prob=0x1 [ACTIVE 33]
[223169.474723] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=10 prob=0x1 [ACTIVE 33]
[223169.474729] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=11 prob=0x1 [ACTIVE 33]
[223169.474736] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=12 prob=0x0 [PASSIVE 120]
[223169.474743] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=13 prob=0x0 [PASSIVE 120]
[223169.474750] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 13 
[223169.474757] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223169.474763] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223169.474775] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4420, 994 bytes at 32[32]:4
[223169.474937] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223169.474957] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 109, 18, 52, 8, 135, 110 mSecs
[223169.474965] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.474976] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:0001AFDD) - 1 (beacon timer 4288547)
[223169.508748] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:000233E9) - 0 elapsed=33804 usec
[223169.509935] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:0002388F) - 1 (beacon timer 4253553)
[223169.543735] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:0002BC9B) - 0 elapsed=33804 usec
[223169.544925] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:0002C13F) - 1 (beacon timer 4218561)
[223169.578739] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:00034555) - 0 elapsed=33814 usec
[223169.579931] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 193, 16, 109, 7, 279, 35 mSecs
[223169.579940] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.579950] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:00034A02) - 1 (beacon timer 8480254)
[223169.613812] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 4 [802.11bg] (TSF: 0x00000000:0003CE5C) - 0 elapsed=33882 usec
[223169.615009] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 551, 193, 273, 109, 522, 35 mSecs
[223169.615016] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.615026] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 5 [802.11bg] (TSF: 0x00000000:0003D30A) - 1 (beacon timer 8445174)
[223169.628341] ieee80211 phy2: I iwl_enqueue_hcmd Sending command REPLY_LEDS_CMD (#48), seq: 0x0421, 12 bytes at 33[1]:4
[223169.628382] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_LEDS_CMD (0x00000000)
[223169.648831] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 5 [802.11bg] (TSF: 0x00000000:00045728) - 1 elapsed=33822 usec
[223169.650017] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 6 [802.11bg] (TSF: 0x00000000:00045BCC) - 1 (beacon timer 8410164)
[223169.683881] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 6 [802.11bg] (TSF: 0x00000000:0004E011) - 0 elapsed=33861 usec
[223169.685072] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 7 [802.11bg] (TSF: 0x00000000:0004E4B7) - 1 (beacon timer 12671817)
[223169.718886] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 7 [802.11bg] (TSF: 0x00000000:000568D0) - 1 elapsed=33817 usec
[223169.720082] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 43, 1, 21, 1, 62, 35 mSecs
[223169.720090] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.720102] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 8 [802.11bg] (TSF: 0x00000000:00056D7D) - 1 (beacon timer 12636803)
[223169.754283] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 8 [802.11bg] (TSF: 0x00000000:0005F311) - 1 elapsed=34196 usec
[223169.755463] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 9 [802.11bg] (TSF: 0x00000000:0005F7B5) - 1 (beacon timer 12601419)
[223169.789301] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 9 [802.11bg] (TSF: 0x00000000:00067BE8) - 0 elapsed=33843 usec
[223169.790495] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 99, 59, 44, 36, 48, 35 mSecs
[223169.790503] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.790512] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 10 [802.11bg] (TSF: 0x00000000:00068096) - 1 (beacon timer 16863082)
[223169.824305] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 10 [802.11bg] (TSF: 0x00000000:000704A6) - 0 elapsed=33808 usec
[223169.825496] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 11 [802.11bg] (TSF: 0x00000000:0007094D) - 1 (beacon timer 16828083)
[223169.859311] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 11 [802.11bg] (TSF: 0x00000000:00078D68) - 0 elapsed=33819 usec
[223169.860496] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 12 [802.11bg] (TSF: 0x00000000:0007920C) - 1 (beacon timer 16793076)
[223169.983397] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 12 [802.11bg] (TSF: 0x00000000:00097225) - 0 elapsed=122905 usec
[223169.984586] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 138, 0, 65, 0, 203, 124 mSecs
[223169.984593] ieee80211 phy2: I iwl_force_reset force reset rejected
[223169.984603] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 13 [802.11bg] (TSF: 0x00000000:000976CB) - 1 (beacon timer 25262389)
[223170.107482] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 13 [802.11bg] (TSF: 0x00000000:000B56DC) - 0 elapsed=122897 usec
[223170.108679] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 13 channels (TSF 0x000B5B97:00000000) - 1
[223170.108687] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 2.4GHz took 634ms
[223170.108693] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223170.108699] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 634ms
[223170.108722] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223170.108746] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0422, 8 bytes at 34[2]:4
[223170.108760] ieee80211 phy2: U iwl_mac_hw_scan enter
[223170.108765] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223170.108773] ieee80211 phy2: U iwl_mac_hw_scan leave
[223170.108782] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223170.108793] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=36 prob=0x0 [PASSIVE 110]
[223170.108800] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=40 prob=0x0 [PASSIVE 110]
[223170.108807] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=44 prob=0x0 [PASSIVE 110]
[223170.108814] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=48 prob=0x0 [PASSIVE 110]
[223170.108821] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=52 prob=0x0 [PASSIVE 110]
[223170.108828] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=56 prob=0x0 [PASSIVE 110]
[223170.108835] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=60 prob=0x0 [PASSIVE 110]
[223170.108843] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=64 prob=0x0 [PASSIVE 110]
[223170.108853] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=100 prob=0x0 [PASSIVE 110]
[223170.108861] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223170.108872] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=104 prob=0x0 [PASSIVE 110]
[223170.108879] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=108 prob=0x0 [PASSIVE 110]
[223170.108886] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=112 prob=0x0 [PASSIVE 110]
[223170.108893] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=116 prob=0x0 [PASSIVE 110]
[223170.108900] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=120 prob=0x0 [PASSIVE 110]
[223170.108907] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=124 prob=0x0 [PASSIVE 110]
[223170.108914] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=128 prob=0x0 [PASSIVE 110]
[223170.108922] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=132 prob=0x0 [PASSIVE 110]
[223170.108929] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=136 prob=0x0 [PASSIVE 110]
[223170.108936] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=140 prob=0x0 [PASSIVE 110]
[223170.108943] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=149 prob=0x0 [PASSIVE 110]
[223170.108950] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=153 prob=0x0 [PASSIVE 110]
[223170.108957] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=157 prob=0x0 [PASSIVE 110]
[223170.108964] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=161 prob=0x0 [PASSIVE 110]
[223170.108971] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=165 prob=0x0 [PASSIVE 110]
[223170.108977] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 24 
[223170.108984] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223170.108990] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223170.108999] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4423, 1120 bytes at 35[32]:4
[223170.110311] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223170.110337] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:000B61F1) - 1 (beacon timer 29433359)
[223170.223000] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:000D1A1B) - 0 elapsed=112682 usec
[223170.224202] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:000D1ED5) - 1 (beacon timer 33616171)
[223170.336875] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:000ED6FF) - 0 elapsed=112682 usec
[223170.338085] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:000EDBB9) - 1 (beacon timer 37798983)
[223170.450762] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:001093E4) - 0 elapsed=112683 usec
[223170.451973] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:0010989F) - 1 (beacon timer 41981793)
[223170.564651] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:001250C9) - 0 elapsed=112682 usec
[223170.565850] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:0012557F) - 1 (beacon timer 46164609)
[223170.678534] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:00140DAB) - 0 elapsed=112684 usec
[223170.679741] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:00141260) - 1 (beacon timer 50347424)
[223170.792420] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:0015CA8D) - 0 elapsed=112685 usec
[223170.793620] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:0015CF40) - 1 (beacon timer 54530240)
[223170.906298] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:00178770) - 0 elapsed=112688 usec
[223170.907501] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:00178C23) - 1 (beacon timer 63009757)
[223171.020183] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:00194453) - 0 elapsed=112688 usec
[223171.021386] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:00194907) - 1 (beacon timer 67192569)
[223171.134073] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:001B013A) - 0 elapsed=112691 usec
[223171.135275] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:001B05EE) - 1 (beacon timer 71375378)
[223171.247964] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:001CBE1D) - 0 elapsed=112687 usec
[223171.249167] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:001CC2D1) - 1 (beacon timer 75558191)
[223171.361864] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:001E7B15) - 0 elapsed=112708 usec
[223171.363074] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:001E7FCA) - 1 (beacon timer 79740982)
[223171.475755] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:00203801) - 0 elapsed=112695 usec
[223171.476956] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:00203CB6) - 1 (beacon timer 83923786)
[223171.589639] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:0021F4E5) - 0 elapsed=112687 usec
[223171.590845] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:0021F99D) - 1 (beacon timer 88106595)
[223171.703534] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:0023B1CD) - 0 elapsed=112688 usec
[223171.704750] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:0023B689) - 1 (beacon timer 92289399)
[223171.817418] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:00256EB5) - 0 elapsed=112684 usec
[223171.818626] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:0025736E) - 1 (beacon timer 96472210)
[223171.931300] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:00272B9B) - 0 elapsed=112685 usec
[223171.932513] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:00273055) - 1 (beacon timer 104951723)
[223172.045210] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:0028E896) - 0 elapsed=112705 usec
[223172.046424] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:0028ED50) - 1 (beacon timer 109134512)
[223172.159114] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:002AA591) - 0 elapsed=112705 usec
[223172.160323] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:002AAA4C) - 1 (beacon timer 113317300)
[223172.273036] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:002C628C) - 0 elapsed=112704 usec
[223172.274235] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:002C6742) - 1 (beacon timer 117500094)
[223172.386927] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:002E1F82) - 0 elapsed=112704 usec
[223172.388136] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:002E2438) - 1 (beacon timer 121682888)
[223172.500840] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:002FDC79) - 0 elapsed=112705 usec
[223172.502044] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:002FE12F) - 1 (beacon timer 125865681)
[223172.614747] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:00319970) - 0 elapsed=112705 usec
[223172.615948] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:00319E27) - 1 (beacon timer 130048473)
[223172.728649] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:00335667) - 0 elapsed=112704 usec
[223172.729854] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:00335B1E) - 1 (beacon timer 134231266)
[223172.842549] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:0035135E) - 0 elapsed=112704 usec
[223172.843750] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x00351819:00000000) - 1
[223172.843758] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 5.2GHz took 2735ms
[223172.843764] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223172.843770] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 2735ms
[223172.843797] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223172.843817] ieee80211 phy2: U iwl_mac_config enter to channel 1 changed 0x40
[223172.843827] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223172.843840] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223172.843847] ieee80211 phy2: U iwl_mac_config leave
[223172.843854] phy2: device now idle
[223172.843862] ieee80211 phy2: U iwl_mac_config enter to channel 1 changed 0x100
[223172.843871] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223172.843879] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223172.843887] ieee80211 phy2: U iwl_mac_config leave
[223172.843911] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0424, 8 bytes at 36[4]:4
[223172.844051] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223172.844517] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223172.844531] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223172.844542] ieee80211 phy2: U iwl_set_rxon_channel Staging channel set to 8 [0]
[223172.844558] ieee80211 phy2: U iwl_commit_rxon Sending RXON
[223172.844562] * without RXON_FILTER_ASSOC_MSK
[223172.844565] * channel = 8
[223172.844568] * bssid = 00:00:00:00:00:00
[223172.844578] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[223172.844587] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[223172.844602] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0425, 54 bytes at 37[5]:4
[223172.845931] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[223172.845982] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0426, 4 bytes at 38[6]:4
[223172.846000] ieee80211 phy2: U iwl_add_bcast_station Adding broadcast station to station table
[223172.846024] ieee80211 phy2: U iwl_add_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
[223172.846033] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[223172.846041] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[223172.846052] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0427, 96 bytes at 39[7]:4
[223172.846070] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[223172.846107] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[223172.846130] ieee80211 phy2: U iwl_process_add_sta_resp Processing response for adding station 15
[223172.846139] ieee80211 phy2: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[223172.846147] ieee80211 phy2: U iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
[223172.846156] ieee80211 phy2: U iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
[223172.846164] ieee80211 phy2: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[223172.846180] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0428, 92 bytes at 40[8]:4
[223172.846190] ieee80211 phy2: U iwl_print_rx_config_cmd RX CONFIG:
[223172.846199] iwl data: 00000000: 00 21 6b 54 60 52 00 00 00 00 00 00 00 00 00 00  .!kT`R..........
[223172.846207] iwl data: 00000010: 00 21 6b 54 60 52 00 00 03 00 06 24 15 03 00 00  .!kT`R.....$....
[223172.846215] iwl data: 00000020: 05 80 00 00 04 00 00 00 08 00 ff ff ff 00 00 00  ................
[223172.846233] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_LINK_QUALITY_CMD (0x00000000)
[223172.846246] iwl data: 00000030: 00 00                                            ..
[223172.846255] ieee80211 phy2: U iwl_print_rx_config_cmd u16 channel: 0x8
[223172.846262] ieee80211 phy2: U iwl_print_rx_config_cmd u32 flags: 0x00008005
[223172.846269] ieee80211 phy2: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
[223172.846276] ieee80211 phy2: U iwl_print_rx_config_cmd u8 dev_type: 0x3
[223172.846282] ieee80211 phy2: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[223172.846289] ieee80211 phy2: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x03
[223172.846297] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] node_addr: 00:21:6b:54:60:52
[223172.846304] ieee80211 phy2: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[223172.846311] ieee80211 phy2: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
[223172.846324] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0429, 8 bytes at 41[9]:4
[223172.846335] ieee80211 phy2: U iwl_mac_config leave
[223172.846414] phy2: device no longer idle - working
[223172.846423] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223172.846430] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223172.846438] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223172.846444] ieee80211 phy2: U iwl_mac_config leave
[223172.846453] wlan0: direct probe to 00:10:db:a1:69:21 (try 1)
[223172.846463] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223172.846478] ieee80211 phy2: I iwl_mac_tx enter
[223172.846485] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223172.846493] ieee80211 phy2: I iwl_tx_skb station Id 15
[223172.846506] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X0 
[223172.846513] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223172.846521] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223172.846529] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223172.846537] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c d6 83 68  ...............h
[223172.846545] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223172.846554] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223172.846562] iwl data: 00000010: ff ff ff ff ff ff 00 00                          ........
[223172.846572] ieee80211 phy2: I iwl_mac_tx leave
[223173.046028] wlan0: direct probe to 00:10:db:a1:69:21 (try 2)
[223173.046051] ieee80211 phy2: I iwl_mac_tx enter
[223173.046057] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223173.046064] ieee80211 phy2: I iwl_tx_skb station Id 15
[223173.046073] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X1 
[223173.046079] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223173.046086] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223173.046093] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223173.046100] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c d8 83 68  ...............h
[223173.046106] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223173.046113] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223173.046119] iwl data: 00000010: ff ff ff ff ff ff 10 00                          ........
[223173.046126] ieee80211 phy2: I iwl_mac_tx leave
[223173.246031] wlan0: direct probe to 00:10:db:a1:69:21 (try 3)
[223173.246054] ieee80211 phy2: I iwl_mac_tx enter
[223173.246060] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223173.246067] ieee80211 phy2: I iwl_tx_skb station Id 15
[223173.246076] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X2 
[223173.246082] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223173.246089] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223173.246096] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223173.246103] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 8a 99 6e  ...............n
[223173.246109] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223173.246116] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223173.246122] iwl data: 00000010: ff ff ff ff ff ff 20 00                          ...... .
[223173.246144] ieee80211 phy2: I iwl_mac_tx leave
[223173.446027] wlan0: direct probe to 00:10:db:a1:69:21 timed out
[223173.448154] phy2: device now idle
[223173.448165] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223173.448172] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223173.448178] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223173.448184] ieee80211 phy2: U iwl_mac_config leave
[223182.850081] phy2: device no longer idle - scanning
[223182.850093] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223182.850101] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223182.850107] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223182.850112] ieee80211 phy2: U iwl_mac_config leave
[223182.850120] ieee80211 phy2: U iwl_mac_hw_scan enter
[223182.850125] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223182.850136] ieee80211 phy2: U iwl_mac_hw_scan leave
[223182.850185] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223182.850198] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=1 prob=0x1 [ACTIVE 33]
[223182.850208] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=2 prob=0x1 [ACTIVE 33]
[223182.850218] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=3 prob=0x1 [ACTIVE 33]
[223182.850228] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=4 prob=0x1 [ACTIVE 33]
[223182.850237] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=5 prob=0x1 [ACTIVE 33]
[223182.850247] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=6 prob=0x1 [ACTIVE 33]
[223182.850255] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=7 prob=0x1 [ACTIVE 33]
[223182.850264] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=8 prob=0x1 [ACTIVE 33]
[223182.850273] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=9 prob=0x1 [ACTIVE 33]
[223182.850282] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=10 prob=0x1 [ACTIVE 33]
[223182.850290] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=11 prob=0x1 [ACTIVE 33]
[223182.850300] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=12 prob=0x0 [PASSIVE 120]
[223182.850309] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=13 prob=0x0 [PASSIVE 120]
[223182.850317] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 13 
[223182.850326] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223182.850334] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223182.850349] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x442A, 994 bytes at 42[32]:4
[223182.851654] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223182.851683] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 20958, 1, 10830, 1, 31786, 10006 mSecs
[223182.851695] ieee80211 phy2: I iwl_force_reset perform force reset (0)
[223182.851703] ieee80211 phy2: I iwl_force_rf_reset force reset rejected: not associated
[223182.851715] ieee80211 phy2: I iwl_tt_handler Queueing thermal throttling work.
[223182.851732] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:0098B3F8) - 1 (beacon timer 406875144)
[223182.885461] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:0099380C) - 1 elapsed=33812 usec
[223182.886653] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:00993CB2) - 1 (beacon timer 411136846)
[223182.920454] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:0099C0BF) - 0 elapsed=33805 usec
[223182.921645] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:0099C564) - 1 (beacon timer 411101852)
[223182.955549] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:009A49DD) - 0 elapsed=33913 usec
[223182.956747] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 134, 2, 70, 1, 201, 35 mSecs
[223182.956755] ieee80211 phy2: I iwl_force_reset force reset rejected
[223182.956765] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:009A4E8D) - 1 (beacon timer 411066739)

[-- Attachment #3: association.txt --]
[-- Type: text/plain, Size: 85795 bytes --]

[223250.369329] ieee80211 phy2: U iwl_mac_hw_scan enter
[223250.369341] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223250.369350] ieee80211 phy2: U iwl_mac_hw_scan leave
[223250.369361] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223250.369375] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=36 prob=0x0 [PASSIVE 110]
[223250.369384] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=40 prob=0x0 [PASSIVE 110]
[223250.369393] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=44 prob=0x0 [PASSIVE 110]
[223250.369403] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=48 prob=0x0 [PASSIVE 110]
[223250.369412] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=52 prob=0x0 [PASSIVE 110]
[223250.369421] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=56 prob=0x0 [PASSIVE 110]
[223250.369430] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=60 prob=0x0 [PASSIVE 110]
[223250.369439] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=64 prob=0x0 [PASSIVE 110]
[223250.369447] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223250.369458] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=100 prob=0x0 [PASSIVE 110]
[223250.369468] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=104 prob=0x0 [PASSIVE 110]
[223250.369477] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=108 prob=0x0 [PASSIVE 110]
[223250.369487] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=112 prob=0x0 [PASSIVE 110]
[223250.369496] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=116 prob=0x0 [PASSIVE 110]
[223250.369505] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=120 prob=0x0 [PASSIVE 110]
[223250.369515] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=124 prob=0x0 [PASSIVE 110]
[223250.369524] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=128 prob=0x0 [PASSIVE 110]
[223250.369534] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=132 prob=0x0 [PASSIVE 110]
[223250.369543] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=136 prob=0x0 [PASSIVE 110]
[223250.369552] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=140 prob=0x0 [PASSIVE 110]
[223250.369562] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=149 prob=0x0 [PASSIVE 110]
[223250.369571] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=153 prob=0x0 [PASSIVE 110]
[223250.369581] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=157 prob=0x0 [PASSIVE 110]
[223250.369590] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=161 prob=0x0 [PASSIVE 110]
[223250.369599] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=165 prob=0x0 [PASSIVE 110]
[223250.369608] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 24 
[223250.369616] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223250.369624] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223250.369636] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4440, 1120 bytes at 64[32]:4
[223250.370959] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223250.370984] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:049F0737) - 1 (beacon timer 3175176393)
[223250.483643] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:04A0BF6A) - 0 elapsed=112691 usec
[223250.484864] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:04A0C42D) - 1 (beacon timer 3179359187)
[223250.597542] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:04A27C55) - 0 elapsed=112680 usec
[223250.598759] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:04A28118) - 1 (beacon timer 3183541992)
[223250.711435] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:04A4393C) - 0 elapsed=112676 usec
[223250.712655] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:04A43E03) - 1 (beacon timer 3187724797)
[223250.825337] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:04A5F637) - 0 elapsed=112692 usec
[223250.826555] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:04A5FAFC) - 1 (beacon timer 3191907588)
[223250.939218] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:04A7B31E) - 0 elapsed=112674 usec
[223250.940440] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:04A7B7E3) - 1 (beacon timer 3196090397)
[223251.053115] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:04A97006) - 0 elapsed=112675 usec
[223251.054331] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:04A974CB) - 1 (beacon timer 3200273205)
[223251.166996] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:04AB2CEE) - 0 elapsed=112675 usec
[223251.168215] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:04AB31B0) - 1 (beacon timer 3204456016)
[223251.280903] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:04ACE9D6) - 0 elapsed=112678 usec
[223251.282115] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:04ACEE96) - 1 (beacon timer 3212935530)
[223251.394776] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:04AEA6BF) - 0 elapsed=112681 usec
[223251.395991] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:04AEAB7D) - 1 (beacon timer 3217118339)
[223251.508660] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:04B0639A) - 0 elapsed=112669 usec
[223251.509877] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:04B06859) - 1 (beacon timer 3221301158)
[223251.622561] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:04B22097) - 0 elapsed=112702 usec
[223251.623777] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:04B22558) - 1 (beacon timer 3225483944)
[223251.736474] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:04B3DD87) - 0 elapsed=112687 usec
[223251.737686] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:04B3E248) - 1 (beacon timer 3229666744)
[223251.850379] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:04B59A85) - 0 elapsed=112701 usec
[223251.851590] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:04B59F46) - 1 (beacon timer 3233849530)
[223251.964282] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:04B75783) - 0 elapsed=112701 usec
[223251.965499] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:04B75C44) - 1 (beacon timer 3238032316)
[223252.078199] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:04B91481) - 0 elapsed=112701 usec
[223252.079413] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:04B91941) - 1 (beacon timer 3242215103)
[223252.192102] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:04BAD17E) - 0 elapsed=112701 usec
[223252.193324] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:04BAD641) - 1 (beacon timer 3246397887)
[223252.306026] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:04BC8E7B) - 0 elapsed=112698 usec
[223252.307250] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:04BC933F) - 1 (beacon timer 3254877377)
[223252.419922] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:04BE4B79) - 0 elapsed=112698 usec
[223252.421146] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:04BE503D) - 1 (beacon timer 3259060163)
[223252.533843] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:04C00877) - 0 elapsed=112698 usec
[223252.535060] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:04C00D39) - 1 (beacon timer 3263242951)
[223252.647745] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:04C1C573) - 0 elapsed=112698 usec
[223252.648965] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:04C1CA36) - 1 (beacon timer 3267425738)
[223252.761667] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:04C3826F) - 0 elapsed=112697 usec
[223252.762880] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:04C38731) - 1 (beacon timer 3271608527)
[223252.875569] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:04C53F6C) - 0 elapsed=112699 usec
[223252.876785] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:04C5442F) - 1 (beacon timer 3275791313)
[223252.989477] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:04C6FC69) - 0 elapsed=112698 usec
[223252.990695] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:04C7012C) - 1 (beacon timer 3279974100)
[223253.103390] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:04C8B966) - 0 elapsed=112698 usec
[223253.104604] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x04C8BE28:00000000) - 1
[223253.104613] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 5.2GHz took 2735ms
[223253.104619] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223253.104624] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 2735ms
[223253.104647] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223253.104788] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223253.104799] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223253.104812] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223253.104819] ieee80211 phy2: U iwl_mac_config leave
[223253.104826] phy2: device now idle
[223253.104833] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223253.104842] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223253.104850] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223253.104857] ieee80211 phy2: U iwl_mac_config leave
[223253.104884] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0441, 8 bytes at 65[1]:4
[223253.105036] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223253.105131] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223253.105142] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223253.105152] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223253.105159] ieee80211 phy2: U iwl_mac_config leave
[223253.105211] phy2: device no longer idle - working
[223253.105220] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223253.105229] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223253.105237] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223253.105244] ieee80211 phy2: U iwl_mac_config leave
[223253.105255] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
[223253.105283] ieee80211 phy2: I iwl_mac_tx enter
[223253.105291] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223253.105301] ieee80211 phy2: I iwl_tx_skb station Id 15
[223253.105316] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X12 
[223253.105325] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223253.105335] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223253.105346] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223253.105356] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 26 ca 6d  .............&.m
[223253.105365] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223253.105375] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223253.105384] iwl data: 00000010: ff ff ff ff ff ff 20 01                          ...... .
[223253.105395] ieee80211 phy2: I iwl_mac_tx leave
[223253.305033] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
[223253.305057] ieee80211 phy2: I iwl_mac_tx enter
[223253.305063] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223253.305070] ieee80211 phy2: I iwl_tx_skb station Id 15
[223253.305079] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X13 
[223253.305084] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223253.305092] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223253.305099] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223253.305105] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 04 cb 6d  ...............m
[223253.305112] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223253.305119] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223253.305125] iwl data: 00000010: ff ff ff ff ff ff 30 01                          ......0.
[223253.305146] ieee80211 phy2: I iwl_mac_tx leave
[223253.505029] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
[223253.505048] ieee80211 phy2: I iwl_mac_tx enter
[223253.505054] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223253.505061] ieee80211 phy2: I iwl_tx_skb station Id 15
[223253.505070] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X14 
[223253.505075] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223253.505082] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223253.505089] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223253.505096] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 6c 87 6e  .............l.n
[223253.505102] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223253.505109] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223253.505115] iwl data: 00000010: ff ff ff ff ff ff 40 01                          ......@.
[223253.505122] ieee80211 phy2: I iwl_mac_tx leave
[223253.705031] wlan0: direct probe to 00:10:db:a1:69:20 timed out
[223253.707154] phy2: device now idle
[223253.707165] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223253.707172] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223253.707179] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223253.707184] ieee80211 phy2: U iwl_mac_config leave
[223263.109118] phy2: device no longer idle - scanning
[223263.109132] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223263.109142] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223263.109151] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223263.109156] ieee80211 phy2: U iwl_mac_config leave
[223263.109164] ieee80211 phy2: U iwl_mac_hw_scan enter
[223263.109169] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223263.109181] ieee80211 phy2: U iwl_mac_hw_scan leave
[223263.109226] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223263.109237] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=1 prob=0x1 [ACTIVE 33]
[223263.109244] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=2 prob=0x1 [ACTIVE 33]
[223263.109251] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=3 prob=0x1 [ACTIVE 33]
[223263.109258] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=4 prob=0x1 [ACTIVE 33]
[223263.109264] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=5 prob=0x1 [ACTIVE 33]
[223263.109271] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=6 prob=0x1 [ACTIVE 33]
[223263.109278] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=7 prob=0x1 [ACTIVE 33]
[223263.109285] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=8 prob=0x1 [ACTIVE 33]
[223263.109291] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=9 prob=0x1 [ACTIVE 33]
[223263.109298] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=10 prob=0x1 [ACTIVE 33]
[223263.109305] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=11 prob=0x1 [ACTIVE 33]
[223263.109312] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=12 prob=0x0 [PASSIVE 120]
[223263.109319] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=13 prob=0x0 [PASSIVE 120]
[223263.109325] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 13 
[223263.109332] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223263.109338] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223263.109350] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4442, 994 bytes at 66[32]:4
[223263.110660] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223263.110683] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 21675, 0, 11252, 0, 32927, 10006 mSecs
[223263.110689] ieee80211 phy2: I iwl_force_reset perform force reset (0)
[223263.110694] ieee80211 phy2: I iwl_force_rf_reset force reset rejected: not associated
[223263.110704] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:05616EAD) - 1 (beacon timer 3695227219)
[223263.144468] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:0561F2B8) - 0 elapsed=33803 usec
[223263.145665] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:0561F763) - 1 (beacon timer 3695192221)
[223263.179493] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:05627B90) - 1 elapsed=33837 usec
[223263.180689] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:0562803C) - 1 (beacon timer 3699453892)
[223263.214539] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:0563046F) - 0 elapsed=33843 usec
[223263.215726] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 138, 10, 79, 3, 204, 35 mSecs
[223263.215735] ieee80211 phy2: I iwl_force_reset force reset rejected
[223263.215746] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:05630918) - 1 (beacon timer 3699418856)
[223263.249569] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 4 [802.11bg] (TSF: 0x00000000:05638D4A) - 0 elapsed=33842 usec
[223263.250774] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 456, 138, 223, 79, 462, 35 mSecs
[223263.250785] ieee80211 phy2: I iwl_force_reset force reset rejected
[223263.250799] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 5 [802.11bg] (TSF: 0x00000000:056391FD) - 1 (beacon timer 3699383811)
[223263.284581] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 5 [802.11bg] (TSF: 0x00000000:05641611) - 0 elapsed=33812 usec
[223263.285773] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 6 [802.11bg] (TSF: 0x00000000:05641ABC) - 1 (beacon timer 3703645508)
[223263.319626] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 6 [802.11bg] (TSF: 0x00000000:05649EFE) - 0 elapsed=33858 usec
[223263.320822] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 7 [802.11bg] (TSF: 0x00000000:0564A3A9) - 1 (beacon timer 3703610455)
[223263.354637] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 7 [802.11bg] (TSF: 0x00000000:056527C2) - 1 elapsed=33817 usec
[223263.355830] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 36, 2, 21, 2, 53, 35 mSecs
[223263.355837] ieee80211 phy2: I iwl_force_reset force reset rejected
[223263.355847] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 8 [802.11bg] (TSF: 0x00000000:05652C6B) - 1 (beacon timer 3703575445)
[223263.389658] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 8 [802.11bg] (TSF: 0x00000000:0565B090) - 0 elapsed=33829 usec
[223263.390849] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 115, 36, 69, 21, 127, 35 mSecs
[223263.390856] ieee80211 phy2: I iwl_force_reset force reset rejected
[223263.390867] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 9 [802.11bg] (TSF: 0x00000000:0565B53A) - 1 (beacon timer 3707837126)
[223263.424705] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 9 [802.11bg] (TSF: 0x00000000:0566397B) - 1 elapsed=33857 usec
[223263.425908] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 10 [802.11bg] (TSF: 0x00000000:05663E2D) - 1 (beacon timer 3707802067)
[223263.459731] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 10 [802.11bg] (TSF: 0x00000000:0566C24D) - 0 elapsed=33824 usec
[223263.460935] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 11 [802.11bg] (TSF: 0x00000000:0566C6FF) - 1 (beacon timer 3707767040)
[223263.494786] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 11 [802.11bg] (TSF: 0x00000000:05674B3F) - 0 elapsed=33856 usec
[223263.495981] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 12 [802.11bg] (TSF: 0x00000000:05674FED) - 1 (beacon timer 3712028691)
[223263.498280] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223263.498297] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223263.498308] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223263.618882] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 12 [802.11bg] (TSF: 0x00000000:05693003) - 0 elapsed=122902 usec
[223263.620080] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 204, 10, 150, 8, 336, 125 mSecs
[223263.620087] ieee80211 phy2: I iwl_force_reset force reset rejected
[223263.620097] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 13 [802.11bg] (TSF: 0x00000000:056934B6) - 1 (beacon timer 3716201290)
[223263.742995] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 13 [802.11bg] (TSF: 0x00000000:056B14D7) - 0 elapsed=122913 usec
[223263.744208] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 13 channels (TSF 0x056B199A:00000000) - 1
[223263.744216] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 2.4GHz took 635ms
[223263.744222] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223263.744228] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 635ms
[223263.744255] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223263.744286] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0443, 8 bytes at 67[3]:4
[223263.744307] ieee80211 phy2: U iwl_mac_hw_scan enter
[223263.744313] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223263.744324] ieee80211 phy2: U iwl_mac_hw_scan leave
[223263.744337] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223263.744350] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=36 prob=0x0 [PASSIVE 110]
[223263.744359] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=40 prob=0x0 [PASSIVE 110]
[223263.744368] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=44 prob=0x0 [PASSIVE 110]
[223263.744377] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=48 prob=0x0 [PASSIVE 110]
[223263.744386] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=52 prob=0x0 [PASSIVE 110]
[223263.744394] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=56 prob=0x0 [PASSIVE 110]
[223263.744403] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=60 prob=0x0 [PASSIVE 110]
[223263.744410] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223263.744419] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=64 prob=0x0 [PASSIVE 110]
[223263.744426] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=100 prob=0x0 [PASSIVE 110]
[223263.744435] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=104 prob=0x0 [PASSIVE 110]
[223263.744443] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=108 prob=0x0 [PASSIVE 110]
[223263.744451] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=112 prob=0x0 [PASSIVE 110]
[223263.744460] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=116 prob=0x0 [PASSIVE 110]
[223263.744468] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=120 prob=0x0 [PASSIVE 110]
[223263.744476] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=124 prob=0x0 [PASSIVE 110]
[223263.744484] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=128 prob=0x0 [PASSIVE 110]
[223263.744492] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=132 prob=0x0 [PASSIVE 110]
[223263.744500] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=136 prob=0x0 [PASSIVE 110]
[223263.744509] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=140 prob=0x0 [PASSIVE 110]
[223263.744517] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=149 prob=0x0 [PASSIVE 110]
[223263.744525] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=153 prob=0x0 [PASSIVE 110]
[223263.744533] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=157 prob=0x0 [PASSIVE 110]
[223263.744542] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=161 prob=0x0 [PASSIVE 110]
[223263.744550] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=165 prob=0x0 [PASSIVE 110]
[223263.744557] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 24 
[223263.744564] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223263.744571] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223263.744583] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4444, 1120 bytes at 68[32]:4
[223263.745911] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223263.745936] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:056B2048) - 1 (beacon timer 3720372152)
[223263.858603] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:056CD87B) - 0 elapsed=112691 usec
[223263.859823] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:056CDD3E) - 1 (beacon timer 3724554946)
[223263.972489] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:056E9561) - 0 elapsed=112675 usec
[223263.973708] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:056E9A25) - 1 (beacon timer 3728737755)
[223264.086398] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:0570525C) - 0 elapsed=112695 usec
[223264.087617] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:05705723) - 1 (beacon timer 3737217245)
[223264.200334] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:05720F6B) - 0 elapsed=112712 usec
[223264.201552] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:05721430) - 1 (beacon timer 3741400016)
[223264.314225] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:0573CC66) - 0 elapsed=112694 usec
[223264.315446] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:0573D12B) - 1 (beacon timer 3745582805)
[223264.428144] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:05758962) - 0 elapsed=112695 usec
[223264.429363] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:05758E27) - 1 (beacon timer 3749765593)
[223264.542051] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:0577465E) - 0 elapsed=112695 usec
[223264.543267] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:05774B20) - 1 (beacon timer 3753948384)
[223264.655957] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:0579035A) - 0 elapsed=112698 usec
[223264.657174] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:05790818) - 1 (beacon timer 3758131176)
[223264.769875] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:057AC056) - 0 elapsed=112702 usec
[223264.771087] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:057AC514) - 1 (beacon timer 3762313964)
[223264.883777] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:057C7D53) - 0 elapsed=112703 usec
[223264.884992] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:057C8212) - 1 (beacon timer 3766496749)
[223264.997692] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:057E3A50) - 0 elapsed=112702 usec
[223264.998905] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:057E3F11) - 1 (beacon timer 3770679535)
[223265.111580] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:057FF73F) - 0 elapsed=112686 usec
[223265.112795] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:057FFC00) - 1 (beacon timer 3779159040)
[223265.225483] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:0581B429) - 0 elapsed=112681 usec
[223265.226698] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:0581B8EA) - 1 (beacon timer 3783341846)
[223265.339350] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:05837102) - 0 elapsed=112664 usec
[223265.340565] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:058375C3) - 1 (beacon timer 3787524669)
[223265.453236] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:05852DEC) - 0 elapsed=112681 usec
[223265.454451] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:058532AC) - 1 (beacon timer 3791707476)
[223265.567120] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:0586EACB) - 0 elapsed=112671 usec
[223265.568339] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:0586EF8C) - 1 (beacon timer 3795890292)
[223265.681034] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:0588A7C8) - 0 elapsed=112700 usec
[223265.682254] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:0588AC8C) - 1 (beacon timer 3800073076)
[223265.794949] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:058A64C6) - 0 elapsed=112698 usec
[223265.796166] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:058A698A) - 1 (beacon timer 3804255862)
[223265.908860] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:058C21C4) - 0 elapsed=112698 usec
[223265.910076] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:058C2686) - 1 (beacon timer 3808438650)
[223266.022758] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:058DDEC0) - 0 elapsed=112698 usec
[223266.023973] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:058DE383) - 1 (beacon timer 3816918141)
[223266.136677] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:058F9BBC) - 0 elapsed=112697 usec
[223266.137894] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:058FA07E) - 1 (beacon timer 3821100930)
[223266.250587] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:059158B9) - 0 elapsed=112699 usec
[223266.251802] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:05915D7C) - 1 (beacon timer 3825283716)
[223266.364494] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:059315B6) - 0 elapsed=112698 usec
[223266.365709] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:05931A79) - 1 (beacon timer 3829466503)
[223266.478398] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:0594D2B3) - 0 elapsed=112698 usec
[223266.479611] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x0594D775:00000000) - 1
[223266.479620] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 5.2GHz took 2735ms
[223266.479625] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223266.479631] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 2735ms
[223266.479654] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223266.479672] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223266.479680] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223266.479690] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223266.479695] ieee80211 phy2: U iwl_mac_config leave
[223266.479700] phy2: device now idle
[223266.479705] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223266.479712] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223266.479717] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223266.479723] ieee80211 phy2: U iwl_mac_config leave
[223266.479740] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0445, 8 bytes at 69[5]:4
[223266.479861] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223266.480201] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223266.480212] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223266.480222] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223266.480230] ieee80211 phy2: U iwl_mac_config leave
[223266.480283] phy2: device no longer idle - working
[223266.480292] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223266.480301] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223266.480309] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223266.480317] ieee80211 phy2: U iwl_mac_config leave
[223266.480328] wlan0: direct probe to 00:10:db:a1:69:20 (try 1)
[223266.480354] ieee80211 phy2: I iwl_mac_tx enter
[223266.480362] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223266.480373] ieee80211 phy2: I iwl_tx_skb station Id 15
[223266.480389] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X15 
[223266.480397] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223266.480407] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223266.480417] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223266.480427] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 6a 87 6e  .............j.n
[223266.480437] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223266.480446] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223266.480455] iwl data: 00000010: ff ff ff ff ff ff 50 01                          ......P.
[223266.480466] ieee80211 phy2: I iwl_mac_tx leave
[223266.680030] wlan0: direct probe to 00:10:db:a1:69:20 (try 2)
[223266.680050] ieee80211 phy2: I iwl_mac_tx enter
[223266.680056] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223266.680063] ieee80211 phy2: I iwl_tx_skb station Id 15
[223266.680073] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X16 
[223266.680078] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223266.680085] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223266.680092] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223266.680099] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 68 87 6e  .............h.n
[223266.680105] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223266.680112] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223266.680118] iwl data: 00000010: ff ff ff ff ff ff 60 01                          ......`.
[223266.680125] ieee80211 phy2: I iwl_mac_tx leave
[223266.880038] wlan0: direct probe to 00:10:db:a1:69:20 (try 3)
[223266.880061] ieee80211 phy2: I iwl_mac_tx enter
[223266.880067] ieee80211 phy2: I iwl_mac_tx dev->xmit(74 bytes) at rate 0x0a
[223266.880074] ieee80211 phy2: I iwl_tx_skb station Id 15
[223266.880084] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X17 
[223266.880089] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223266.880097] iwl data: 00000000: 4a 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  J.... ..........
[223266.880104] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223266.880110] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c 6e 87 6e  .............n.n
[223266.880117] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223266.880123] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223266.880130] iwl data: 00000010: ff ff ff ff ff ff 70 01                          ......p.
[223266.880151] ieee80211 phy2: I iwl_mac_tx leave
[223267.080150] wlan0: direct probe to 00:10:db:a1:69:20 timed out
[223267.083153] phy2: device now idle
[223267.083163] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223267.083171] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223267.083177] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223267.083183] ieee80211 phy2: U iwl_mac_config leave
[223276.485471] phy2: device no longer idle - scanning
[223276.485483] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223276.485490] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223276.485496] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223276.485502] ieee80211 phy2: U iwl_mac_config leave
[223276.485509] ieee80211 phy2: U iwl_mac_hw_scan enter
[223276.485515] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223276.485525] ieee80211 phy2: U iwl_mac_hw_scan leave
[223276.485569] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223276.485579] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=1 prob=0x1 [ACTIVE 33]
[223276.485586] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=2 prob=0x1 [ACTIVE 33]
[223276.485593] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=3 prob=0x1 [ACTIVE 33]
[223276.485600] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=4 prob=0x1 [ACTIVE 33]
[223276.485607] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=5 prob=0x1 [ACTIVE 33]
[223276.485613] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=6 prob=0x1 [ACTIVE 33]
[223276.485620] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=7 prob=0x1 [ACTIVE 33]
[223276.485627] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=8 prob=0x1 [ACTIVE 33]
[223276.485633] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=9 prob=0x1 [ACTIVE 33]
[223276.485640] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=10 prob=0x1 [ACTIVE 33]
[223276.485647] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=11 prob=0x1 [ACTIVE 33]
[223276.485654] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=12 prob=0x0 [PASSIVE 120]
[223276.485661] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=13 prob=0x0 [PASSIVE 120]
[223276.485667] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 13 
[223276.485674] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223276.485680] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223276.485691] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4446, 994 bytes at 70[32]:4
[223276.487000] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223276.487038] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 20695, 0, 10606, 0, 31301, 10008 mSecs
[223276.487045] ieee80211 phy2: I iwl_force_reset perform force reset (0)
[223276.487050] ieee80211 phy2: I iwl_force_rf_reset force reset rejected: not associated
[223276.487056] ieee80211 phy2: I iwl_tt_handler Queueing thermal throttling work.
[223276.487067] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:062D8D26) - 1 (beacon timer 4244718298)
[223276.520849] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:062E115D) - 0 elapsed=33847 usec
[223276.522039] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:062E1605) - 1 (beacon timer 4244683259)
[223276.555880] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:062E9A3D) - 0 elapsed=33848 usec
[223276.557073] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 29, 0, 17, 0, 46, 35 mSecs
[223276.557081] ieee80211 phy2: I iwl_force_reset force reset rejected
[223276.557091] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:062E9EE5) - 1 (beacon timer 4244648219)
[223276.590882] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:062F22F8) - 1 elapsed=33811 usec
[223276.592072] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 239, 29, 123, 17, 316, 35 mSecs
[223276.592079] ieee80211 phy2: I iwl_force_reset force reset rejected
[223276.592090] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:062F279F) - 1 (beacon timer 4248909921)
[223276.625881] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 4 [802.11bg] (TSF: 0x00000000:062FABB0) - 0 elapsed=33809 usec
[223276.627079] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 519, 239, 264, 123, 421, 35 mSecs
[223276.627087] ieee80211 phy2: I iwl_force_reset force reset rejected
[223276.627097] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 5 [802.11bg] (TSF: 0x00000000:062FB060) - 1 (beacon timer 4248874912)
[223276.662380] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 5 [802.11bg] (TSF: 0x00000000:06303A46) - 1 elapsed=35302 usec
[223276.663582] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 6 [802.11bg] (TSF: 0x00000000:06303EF6) - 1 (beacon timer 4248838409)
[223276.697417] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 6 [802.11bg] (TSF: 0x00000000:0630C31D) - 0 elapsed=33831 usec
[223276.698610] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 7 [802.11bg] (TSF: 0x00000000:0630C7C7) - 1 (beacon timer 4253100089)
[223276.732455] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 7 [802.11bg] (TSF: 0x00000000:06314C04) - 1 elapsed=33853 usec
[223276.733644] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 36, 0, 15, 0, 51, 35 mSecs
[223276.733651] ieee80211 phy2: I iwl_force_reset force reset rejected
[223276.733662] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 8 [802.11bg] (TSF: 0x00000000:063150AD) - 1 (beacon timer 4253065043)
[223276.767505] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 8 [802.11bg] (TSF: 0x00000000:0631D4F2) - 1 elapsed=33861 usec
[223276.768701] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 203, 36, 106, 15, 258, 35 mSecs
[223276.768708] ieee80211 phy2: I iwl_force_reset force reset rejected
[223276.768719] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 9 [802.11bg] (TSF: 0x00000000:0631D99C) - 1 (beacon timer 4253029988)
[223276.802503] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 9 [802.11bg] (TSF: 0x00000000:06325DAA) - 0 elapsed=33806 usec
[223276.803700] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 10 [802.11bg] (TSF: 0x00000000:06326252) - 1 (beacon timer 4257291694)
[223276.837505] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 10 [802.11bg] (TSF: 0x00000000:0632E664) - 0 elapsed=33810 usec
[223276.838708] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 11 [802.11bg] (TSF: 0x00000000:0632EB14) - 1 (beacon timer 4257256684)
[223276.872554] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 11 [802.11bg] (TSF: 0x00000000:06336F4F) - 0 elapsed=33851 usec
[223276.873751] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 12 [802.11bg] (TSF: 0x00000000:063373F8) - 1 (beacon timer 4257221640)
[223276.875983] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223276.876000] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223276.876011] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223276.996647] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 12 [802.11bg] (TSF: 0x00000000:06355416) - 0 elapsed=122910 usec
[223276.997849] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 13 [802.11bg] (TSF: 0x00000000:063558C6) - 1 (beacon timer 4265690938)
[223277.120762] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 13 [802.11bg] (TSF: 0x00000000:063738F0) - 0 elapsed=122922 usec
[223277.121970] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 255, 16, 119, 10, 348, 124 mSecs
[223277.121978] ieee80211 phy2: I iwl_force_reset force reset rejected
[223277.121988] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 13 channels (TSF 0x06373DB1:00000000) - 1
[223277.121995] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 2.4GHz took 636ms
[223277.122001] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223277.122006] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 636ms
[223277.122028] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223277.122053] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0447, 8 bytes at 71[7]:4
[223277.122061] ieee80211 phy2: U iwl_mac_hw_scan enter
[223277.122072] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223277.122083] ieee80211 phy2: U iwl_mac_hw_scan leave
[223277.122094] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223277.122106] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=36 prob=0x0 [PASSIVE 110]
[223277.122113] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=40 prob=0x0 [PASSIVE 110]
[223277.122120] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=44 prob=0x0 [PASSIVE 110]
[223277.122128] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=48 prob=0x0 [PASSIVE 110]
[223277.122138] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=52 prob=0x0 [PASSIVE 110]
[223277.122148] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=56 prob=0x0 [PASSIVE 110]
[223277.122159] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=60 prob=0x0 [PASSIVE 110]
[223277.122179] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223277.122193] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=64 prob=0x0 [PASSIVE 110]
[223277.122202] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=100 prob=0x0 [PASSIVE 110]
[223277.122212] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=104 prob=0x0 [PASSIVE 110]
[223277.122221] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=108 prob=0x0 [PASSIVE 110]
[223277.122231] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=112 prob=0x0 [PASSIVE 110]
[223277.122240] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=116 prob=0x0 [PASSIVE 110]
[223277.122249] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=120 prob=0x0 [PASSIVE 110]
[223277.122259] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=124 prob=0x0 [PASSIVE 110]
[223277.122268] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=128 prob=0x0 [PASSIVE 110]
[223277.122278] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=132 prob=0x0 [PASSIVE 110]
[223277.122287] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=136 prob=0x0 [PASSIVE 110]
[223277.122297] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=140 prob=0x0 [PASSIVE 110]
[223277.122306] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=149 prob=0x0 [PASSIVE 110]
[223277.122315] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=153 prob=0x0 [PASSIVE 110]
[223277.122325] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=157 prob=0x0 [PASSIVE 110]
[223277.122334] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=161 prob=0x0 [PASSIVE 110]
[223277.122344] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=165 prob=0x0 [PASSIVE 110]
[223277.122352] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 24 
[223277.122360] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223277.122368] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223277.122381] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4448, 1120 bytes at 72[32]:4
[223277.123706] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223277.123736] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:06374471) - 1 (beacon timer 4269861775)
[223277.236385] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:0638FC93) - 0 elapsed=112674 usec
[223277.237598] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:06390154) - 1 (beacon timer 4274044588)
[223277.350274] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:063AB985) - 0 elapsed=112689 usec
[223277.351491] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:063ABE46) - 1 (beacon timer 4278227386)
[223277.464157] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:063C7669) - 0 elapsed=112675 usec
[223277.465375] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:063C7B2B) - 1 (beacon timer 4282410197)
[223277.578045] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:063E334D) - 0 elapsed=112674 usec
[223277.579259] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:063E380E) - 1 (beacon timer 4286593010)
[223277.691935] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:063FF032) - 0 elapsed=112676 usec
[223277.693149] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:063FF4F1) - 1 (beacon timer 4290775823)
[223277.805819] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:0641AD17) - 0 elapsed=112678 usec
[223277.807035] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:0641B1D6) - 1 (beacon timer 4288042)
[223277.919708] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:064369FC) - 0 elapsed=112678 usec
[223277.920921] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:06436EBB) - 1 (beacon timer 8470853)
[223278.033587] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:064526E2) - 0 elapsed=112679 usec
[223278.034799] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:06452B9E) - 1 (beacon timer 12653666)
[223278.147484] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:0646E3C8) - 0 elapsed=112682 usec
[223278.148700] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:0646E888) - 1 (beacon timer 16836472)
[223278.261370] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:0648A0AE) - 0 elapsed=112678 usec
[223278.262583] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:0648A56E) - 1 (beacon timer 21019282)
[223278.375255] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:064A5D94) - 0 elapsed=112678 usec
[223278.376470] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:064A6254) - 1 (beacon timer 25202092)
[223278.489114] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:064C1A69) - 0 elapsed=112661 usec
[223278.490330] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:064C1F2A) - 1 (beacon timer 29384918)
[223278.603040] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:064DD764) - 0 elapsed=112698 usec
[223278.604257] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:064DDC26) - 1 (beacon timer 33567706)
[223278.716930] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:064F944E) - 0 elapsed=112680 usec
[223278.718143] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:064F990E) - 1 (beacon timer 37750514)
[223278.830811] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:06515135) - 0 elapsed=112679 usec
[223278.832030] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:065155FA) - 1 (beacon timer 46230022)
[223278.944686] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:06530E14) - 0 elapsed=112666 usec
[223278.945905] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:065312D9) - 1 (beacon timer 50412839)
[223279.058603] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:0654CB13) - 0 elapsed=112698 usec
[223279.059819] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:0654CFD9) - 1 (beacon timer 54595623)
[223279.172517] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:06568813) - 0 elapsed=112698 usec
[223279.173739] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:06568CD9) - 1 (beacon timer 58778407)
[223279.286429] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:06584513) - 0 elapsed=112698 usec
[223279.287653] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:065849DC) - 1 (beacon timer 62961188)
[223279.400349] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:065A0213) - 0 elapsed=112695 usec
[223279.401573] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:065A06DD) - 1 (beacon timer 67143971)
[223279.514257] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:065BBF14) - 0 elapsed=112695 usec
[223279.515480] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:065BC3DE) - 1 (beacon timer 71326754)
[223279.628170] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:065D7C15) - 0 elapsed=112695 usec
[223279.629403] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:065D80E0) - 1 (beacon timer 75509536)
[223279.742092] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:065F3916) - 0 elapsed=112694 usec
[223279.743318] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:065F3DE0) - 1 (beacon timer 79692320)
[223279.855999] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:0660F618) - 0 elapsed=112696 usec
[223279.857208] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x0660FADA:00000000) - 1
[223279.857220] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 5.2GHz took 2735ms
[223279.857228] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223279.857236] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 2735ms
[223279.857268] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223279.857291] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223279.857301] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223279.857313] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223279.857321] ieee80211 phy2: U iwl_mac_config leave
[223279.857328] phy2: device now idle
[223279.857335] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223279.857345] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223279.857354] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223279.857361] ieee80211 phy2: U iwl_mac_config leave
[223279.857389] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x0449, 8 bytes at 73[9]:4
[223279.857515] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223279.857834] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223279.857847] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223279.857859] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223279.857867] ieee80211 phy2: U iwl_mac_config leave
[223279.857928] phy2: device no longer idle - working
[223279.857938] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223279.857947] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223279.857954] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223279.857962] ieee80211 phy2: U iwl_mac_config leave
[223279.857973] wlan0: direct probe to 00:10:db:a1:69:21 (try 1)
[223279.858007] ieee80211 phy2: I iwl_mac_tx enter
[223279.858015] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223279.858025] ieee80211 phy2: I iwl_tx_skb station Id 15
[223279.858040] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X18 
[223279.858048] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223279.858058] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223279.858068] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223279.858077] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c f6 9f 4e  ...............N
[223279.858087] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223279.858096] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223279.858106] iwl data: 00000010: ff ff ff ff ff ff 80 01                          ........
[223279.858118] ieee80211 phy2: I iwl_mac_tx leave
[223280.058027] wlan0: direct probe to 00:10:db:a1:69:21 (try 2)
[223280.058049] ieee80211 phy2: I iwl_mac_tx enter
[223280.058055] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223280.058062] ieee80211 phy2: I iwl_tx_skb station Id 15
[223280.058071] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X19 
[223280.058077] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223280.058084] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223280.058091] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223280.058097] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c f8 9f 4e  ...............N
[223280.058104] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223280.058110] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223280.058117] iwl data: 00000010: ff ff ff ff ff ff 90 01                          ........
[223280.058123] ieee80211 phy2: I iwl_mac_tx leave
[223280.258030] wlan0: direct probe to 00:10:db:a1:69:21 (try 3)
[223280.258053] ieee80211 phy2: I iwl_mac_tx enter
[223280.258059] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223280.258066] ieee80211 phy2: I iwl_tx_skb station Id 15
[223280.258076] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X1a 
[223280.258082] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223280.258089] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223280.258096] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223280.258103] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c fa 9f 4e  ...............N
[223280.258109] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223280.258116] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223280.258122] iwl data: 00000010: ff ff ff ff ff ff a0 01                          ........
[223280.258144] ieee80211 phy2: I iwl_mac_tx leave
[223280.458027] wlan0: direct probe to 00:10:db:a1:69:21 timed out
[223280.460153] phy2: device now idle
[223280.460163] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223280.460171] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223280.460177] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223280.460183] ieee80211 phy2: U iwl_mac_config leave
[223289.858555] phy2: device no longer idle - scanning
[223289.858568] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223289.858575] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223289.858581] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223289.858587] ieee80211 phy2: U iwl_mac_config leave
[223289.858594] ieee80211 phy2: U iwl_mac_hw_scan enter
[223289.858599] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223289.858610] ieee80211 phy2: U iwl_mac_hw_scan leave
[223289.858655] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223289.858665] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=1 prob=0x1 [ACTIVE 33]
[223289.858672] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=2 prob=0x1 [ACTIVE 33]
[223289.858679] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=3 prob=0x1 [ACTIVE 33]
[223289.858686] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=4 prob=0x1 [ACTIVE 33]
[223289.858693] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=5 prob=0x1 [ACTIVE 33]
[223289.858699] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=6 prob=0x1 [ACTIVE 33]
[223289.858706] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=7 prob=0x1 [ACTIVE 33]
[223289.858713] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=8 prob=0x1 [ACTIVE 33]
[223289.858720] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=9 prob=0x1 [ACTIVE 33]
[223289.858726] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=10 prob=0x1 [ACTIVE 33]
[223289.858733] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=11 prob=0x1 [ACTIVE 33]
[223289.858740] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=12 prob=0x0 [PASSIVE 120]
[223289.858747] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=13 prob=0x0 [PASSIVE 120]
[223289.858753] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 13 
[223289.858760] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223289.858766] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223289.858777] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x444A, 994 bytes at 74[32]:4
[223289.860146] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223289.860170] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 19761, 0, 10135, 0, 29896, 10003 mSecs
[223289.860177] ieee80211 phy2: I iwl_force_reset perform force reset (0)
[223289.860183] ieee80211 phy2: I iwl_force_rf_reset force reset rejected: not associated
[223289.860194] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:06F99F26) - 1 (beacon timer 494948570)
[223289.893960] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:06FA2341) - 1 elapsed=33819 usec
[223289.895154] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:06FA27EA) - 1 (beacon timer 499210262)
[223289.928992] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:06FAAC1D) - 0 elapsed=33843 usec
[223289.930184] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:06FAB0C6) - 1 (beacon timer 499175226)
[223289.972055] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:06FB5459) - 0 elapsed=41875 usec
[223289.973253] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 201, 24, 111, 9, 279, 43 mSecs
[223289.973261] ieee80211 phy2: I iwl_force_reset force reset rejected
[223289.973271] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:06FB5909) - 1 (beacon timer 499132151)
[223290.007123] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 4 [802.11bg] (TSF: 0x00000000:06FBDD52) - 0 elapsed=33865 usec
[223290.008322] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 331, 201, 180, 111, 199, 35 mSecs
[223290.008330] ieee80211 phy2: I iwl_force_reset force reset rejected
[223290.008340] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 5 [802.11bg] (TSF: 0x00000000:06FBE202) - 1 (beacon timer 503393789)
[223290.042948] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 5 [802.11bg] (TSF: 0x00000000:06FC6946) - 0 elapsed=34628 usec
[223290.044146] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 6 [802.11bg] (TSF: 0x00000000:06FC6DF7) - 1 (beacon timer 503357961)
[223290.077948] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 6 [802.11bg] (TSF: 0x00000000:06FCF203) - 0 elapsed=33804 usec
[223290.079139] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 7 [802.11bg] (TSF: 0x00000000:06FCF6AC) - 1 (beacon timer 503322964)
[223290.112958] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 7 [802.11bg] (TSF: 0x00000000:06FD7AC8) - 0 elapsed=33820 usec
[223290.114149] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 8 [802.11bg] (TSF: 0x00000000:06FD7F6F) - 1 (beacon timer 507584657)
[223290.147999] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 8 [802.11bg] (TSF: 0x00000000:06FE03AF) - 1 elapsed=33856 usec
[223290.149193] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 65, 38, 40, 16, 51, 35 mSecs
[223290.149201] ieee80211 phy2: I iwl_force_reset force reset rejected
[223290.149211] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 9 [802.11bg] (TSF: 0x00000000:06FE0857) - 1 (beacon timer 507549609)
[223290.183023] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 9 [802.11bg] (TSF: 0x00000000:06FE8C74) - 1 elapsed=33821 usec
[223290.184215] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 111, 65, 59, 40, 65, 35 mSecs
[223290.184224] ieee80211 phy2: I iwl_force_reset force reset rejected
[223290.184234] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 10 [802.11bg] (TSF: 0x00000000:06FE9126) - 1 (beacon timer 507514586)
[223290.218032] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 10 [802.11bg] (TSF: 0x00000000:06FF1535) - 0 elapsed=33807 usec
[223290.219214] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 11 [802.11bg] (TSF: 0x00000000:06FF19DC) - 1 (beacon timer 511776292)
[223290.253031] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 11 [802.11bg] (TSF: 0x00000000:06FF9DF8) - 0 elapsed=33820 usec
[223290.254224] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 12 [802.11bg] (TSF: 0x00000000:06FFA2A0) - 1 (beacon timer 511741280)
[223290.256543] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223290.256560] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223290.256570] ieee80211 phy2: I iwl5000_rx_reply_tx TXQ 0 status TX_LOCKED (0x00000090) rate_n_flags 0x820a retries 0
[223290.377132] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 12 [802.11bg] (TSF: 0x00000000:070182C2) - 0 elapsed=122914 usec
[223290.378330] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 13 [802.11bg] (TSF: 0x00000000:07018772) - 1 (beacon timer 515913869)
[223290.501287] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 13 [802.11bg] (TSF: 0x00000000:070367C6) - 0 elapsed=122964 usec
[223290.502498] ieee80211 phy2: I iwl_rx_statistics plcp_err exceeded 100, 269, 31, 126, 14, 350, 124 mSecs
[223290.502506] ieee80211 phy2: I iwl_force_reset force reset rejected
[223290.502516] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 13 channels (TSF 0x07036C87:00000000) - 1
[223290.502524] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 2.4GHz took 644ms
[223290.502529] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223290.502535] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 644ms
[223290.502556] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223290.502580] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x044B, 8 bytes at 75[11]:4
[223290.502588] ieee80211 phy2: U iwl_mac_hw_scan enter
[223290.502599] ieee80211 phy2: U iwl_scan_initiate Starting scan...
[223290.502610] ieee80211 phy2: U iwl_mac_hw_scan leave
[223290.502621] ieee80211 phy2: U iwl_bg_request_scan Kicking off active scan
[223290.502634] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=36 prob=0x0 [PASSIVE 110]
[223290.502641] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=40 prob=0x0 [PASSIVE 110]
[223290.502648] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=44 prob=0x0 [PASSIVE 110]
[223290.502655] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=48 prob=0x0 [PASSIVE 110]
[223290.502662] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=52 prob=0x0 [PASSIVE 110]
[223290.502669] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=56 prob=0x0 [PASSIVE 110]
[223290.502676] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=60 prob=0x0 [PASSIVE 110]
[223290.502683] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=64 prob=0x0 [PASSIVE 110]
[223290.502690] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=100 prob=0x0 [PASSIVE 110]
[223290.502708] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223290.502719] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=104 prob=0x0 [PASSIVE 110]
[223290.502726] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=108 prob=0x0 [PASSIVE 110]
[223290.502733] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=112 prob=0x0 [PASSIVE 110]
[223290.502740] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=116 prob=0x0 [PASSIVE 110]
[223290.502747] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=120 prob=0x0 [PASSIVE 110]
[223290.502754] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=124 prob=0x0 [PASSIVE 110]
[223290.502761] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=128 prob=0x0 [PASSIVE 110]
[223290.502768] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=132 prob=0x0 [PASSIVE 110]
[223290.502775] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=136 prob=0x0 [PASSIVE 110]
[223290.502782] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=140 prob=0x0 [PASSIVE 110]
[223290.502789] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=149 prob=0x0 [PASSIVE 110]
[223290.502796] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=153 prob=0x0 [PASSIVE 110]
[223290.502803] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=157 prob=0x0 [PASSIVE 110]
[223290.502811] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=161 prob=0x0 [PASSIVE 110]
[223290.502818] ieee80211 phy2: U iwl_get_channels_for_scan Scanning ch=165 prob=0x0 [PASSIVE 110]
[223290.502824] ieee80211 phy2: U iwl_get_channels_for_scan total channels to scan 24 
[223290.502831] ieee80211 phy2: U iwl_send_cmd_sync Attempting to send sync command REPLY_SCAN_CMD
[223290.502837] ieee80211 phy2: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223290.502847] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x444C, 1120 bytes at 76[32]:4
[223290.504170] ieee80211 phy2: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_SCAN_CMD 
[223290.504191] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 36 [802.11a] (TSF: 0x00000000:0703730C) - 1 (beacon timer 524381428)
[223290.616858] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 36 [802.11a] (TSF: 0x00000000:07052B40) - 0 elapsed=112692 usec
[223290.618072] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 40 [802.11a] (TSF: 0x00000000:07053001) - 1 (beacon timer 528564223)
[223290.730755] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 40 [802.11a] (TSF: 0x00000000:0706E824) - 0 elapsed=112675 usec
[223290.731965] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 44 [802.11a] (TSF: 0x00000000:0706ECE5) - 1 (beacon timer 532747035)
[223290.844631] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 44 [802.11a] (TSF: 0x00000000:0708A508) - 0 elapsed=112675 usec
[223290.845847] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 48 [802.11a] (TSF: 0x00000000:0708A9CC) - 1 (beacon timer 536929844)
[223290.958530] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 48 [802.11a] (TSF: 0x00000000:070A6200) - 0 elapsed=112692 usec
[223290.959749] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 52 [802.11a] (TSF: 0x00000000:070A66C1) - 1 (beacon timer 541112639)
[223291.072422] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 52 [802.11a] (TSF: 0x00000000:070C1EE5) - 0 elapsed=112676 usec
[223291.073637] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 56 [802.11a] (TSF: 0x00000000:070C23A7) - 1 (beacon timer 545295449)
[223291.186301] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 56 [802.11a] (TSF: 0x00000000:070DDBCA) - 0 elapsed=112675 usec
[223291.187521] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 60 [802.11a] (TSF: 0x00000000:070DE08C) - 1 (beacon timer 549478260)
[223291.300204] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 60 [802.11a] (TSF: 0x00000000:070F98AF) - 0 elapsed=112675 usec
[223291.301415] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 64 [802.11a] (TSF: 0x00000000:070F9D6E) - 1 (beacon timer 553661074)
[223291.414071] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 64 [802.11a] (TSF: 0x00000000:07115595) - 0 elapsed=112679 usec
[223291.415283] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 100 [802.11a] (TSF: 0x00000000:07115A51) - 1 (beacon timer 557843887)
[223291.527968] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 100 [802.11a] (TSF: 0x00000000:0713127B) - 0 elapsed=112682 usec
[223291.529177] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 104 [802.11a] (TSF: 0x00000000:07131736) - 1 (beacon timer 566323402)
[223291.641849] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 104 [802.11a] (TSF: 0x00000000:0714CF61) - 0 elapsed=112683 usec
[223291.643061] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 108 [802.11a] (TSF: 0x00000000:0714D41E) - 1 (beacon timer 570506210)
[223291.755746] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 108 [802.11a] (TSF: 0x00000000:07168C47) - 0 elapsed=112681 usec
[223291.756958] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 112 [802.11a] (TSF: 0x00000000:07169103) - 1 (beacon timer 574689020)
[223291.869618] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 112 [802.11a] (TSF: 0x00000000:07184923) - 0 elapsed=112672 usec
[223291.870833] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 116 [802.11a] (TSF: 0x00000000:07184DE1) - 1 (beacon timer 578871839)
[223291.983527] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 116 [802.11a] (TSF: 0x00000000:071A061E) - 0 elapsed=112701 usec
[223291.984740] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 120 [802.11a] (TSF: 0x00000000:071A0ADD) - 1 (beacon timer 583054627)
[223292.097432] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 120 [802.11a] (TSF: 0x00000000:071BC319) - 0 elapsed=112700 usec
[223292.098644] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 124 [802.11a] (TSF: 0x00000000:071BC7D7) - 1 (beacon timer 587237417)
[223292.211354] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 124 [802.11a] (TSF: 0x00000000:071D8014) - 0 elapsed=112701 usec
[223292.212566] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 128 [802.11a] (TSF: 0x00000000:071D84D6) - 1 (beacon timer 591420202)
[223292.325231] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 128 [802.11a] (TSF: 0x00000000:071F3D02) - 0 elapsed=112684 usec
[223292.326453] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 132 [802.11a] (TSF: 0x00000000:071F41C6) - 1 (beacon timer 595603002)
[223292.439154] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 132 [802.11a] (TSF: 0x00000000:0720FA01) - 0 elapsed=112699 usec
[223292.440379] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 136 [802.11a] (TSF: 0x00000000:0720FEC7) - 1 (beacon timer 599785785)
[223292.553059] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 136 [802.11a] (TSF: 0x00000000:0722B701) - 0 elapsed=112698 usec
[223292.554278] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 140 [802.11a] (TSF: 0x00000000:0722BBC7) - 1 (beacon timer 608265273)
[223292.666979] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 140 [802.11a] (TSF: 0x00000000:07247401) - 0 elapsed=112698 usec
[223292.668198] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 149 [802.11a] (TSF: 0x00000000:072478C7) - 1 (beacon timer 612448057)
[223292.780893] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 149 [802.11a] (TSF: 0x00000000:07263101) - 0 elapsed=112698 usec
[223292.782115] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 153 [802.11a] (TSF: 0x00000000:072635C8) - 1 (beacon timer 616630840)
[223292.894805] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 153 [802.11a] (TSF: 0x00000000:0727EE02) - 0 elapsed=112698 usec
[223292.896027] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 157 [802.11a] (TSF: 0x00000000:0727F2C9) - 1 (beacon timer 620813623)
[223293.008714] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 157 [802.11a] (TSF: 0x00000000:0729AB03) - 0 elapsed=112698 usec
[223293.009935] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 161 [802.11a] (TSF: 0x00000000:0729AFCB) - 1 (beacon timer 624996405)
[223293.122639] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 161 [802.11a] (TSF: 0x00000000:072B6804) - 0 elapsed=112697 usec
[223293.123858] ieee80211 phy2: I iwl_rx_scan_start_notif Scan start: 165 [802.11a] (TSF: 0x00000000:072B6CCB) - 1 (beacon timer 629179189)
[223293.236554] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res: 165 [802.11a] (TSF: 0x00000000:072D2506) - 0 elapsed=112699 usec
[223293.237757] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan complete: 24 channels (TSF 0x072D29C8:00000000) - 1
[223293.237766] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan pass on 5.2GHz took 2735ms
[223293.237772] ieee80211 phy2: I iwl_rx_scan_complete_notif Setting scan to off
[223293.237777] ieee80211 phy2: I iwl_rx_scan_complete_notif Scan took 2735ms
[223293.237799] ieee80211 phy2: U iwl_bg_scan_completed SCAN complete scan
[223293.237818] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223293.237828] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223293.237840] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223293.237847] ieee80211 phy2: U iwl_mac_config leave
[223293.237854] phy2: device now idle
[223293.237861] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223293.237870] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223293.237878] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223293.237885] ieee80211 phy2: U iwl_mac_config leave
[223293.237909] ieee80211 phy2: U iwl_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x044D, 8 bytes at 77[13]:4
[223293.238050] ieee80211 phy2: I iwl_generic_cmd_callback back from REPLY_TX_POWER_DBM_CMD (0x00000000)
[223293.238262] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x40
[223293.238273] ieee80211 phy2: U iwl_set_rxon_chain rx_chain=0x2406 active=2 idle=1
[223293.238284] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223293.238292] ieee80211 phy2: U iwl_mac_config leave
[223293.238405] phy2: device no longer idle - working
[223293.238415] ieee80211 phy2: U iwl_mac_config enter to channel 8 changed 0x100
[223293.238424] ieee80211 phy2: U iwl_power_sleep_cam_cmd Sleep command for CAM
[223293.238432] ieee80211 phy2: U iwl_mac_config Not re-sending same RXON configuration.
[223293.238439] ieee80211 phy2: U iwl_mac_config leave
[223293.238450] wlan0: direct probe to 00:10:db:a1:69:21 (try 1)
[223293.238482] ieee80211 phy2: I iwl_mac_tx enter
[223293.238492] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223293.238501] ieee80211 phy2: I iwl_tx_skb station Id 15
[223293.238518] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X1b 
[223293.238526] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223293.238537] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223293.238547] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223293.238557] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c fc 9f 4e  ...............N
[223293.238567] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223293.238577] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223293.238586] iwl data: 00000010: ff ff ff ff ff ff b0 01                          ........
[223293.238597] ieee80211 phy2: I iwl_mac_tx leave
[223293.438030] wlan0: direct probe to 00:10:db:a1:69:21 (try 2)
[223293.438052] ieee80211 phy2: I iwl_mac_tx enter
[223293.438058] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223293.438065] ieee80211 phy2: I iwl_tx_skb station Id 15
[223293.438075] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X1c 
[223293.438080] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223293.438088] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223293.438095] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223293.438101] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c fe 9f 4e  ...............N
[223293.438108] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223293.438114] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223293.438121] iwl data: 00000010: ff ff ff ff ff ff c0 01                          ........
[223293.438141] ieee80211 phy2: I iwl_mac_tx leave
[223293.638031] wlan0: direct probe to 00:10:db:a1:69:21 (try 3)
[223293.638050] ieee80211 phy2: I iwl_mac_tx enter
[223293.638056] ieee80211 phy2: I iwl_mac_tx dev->xmit(76 bytes) at rate 0x0a
[223293.638062] ieee80211 phy2: I iwl_tx_skb station Id 15
[223293.638071] ieee80211 phy2: I iwl_tx_skb sequence nr = 0X1d 
[223293.638076] ieee80211 phy2: I iwl_tx_skb tx_flags = 0X2000 
[223293.638083] iwl data: 00000000: 4c 00 00 00 00 20 00 00 00 00 00 00 0a 82 00 00  L.... ..........
[223293.638089] iwl data: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[223293.638096] iwl data: 00000020: 00 00 00 00 00 00 00 00 ff ff ff ff 0c f0 9f 4e  ...............N
[223293.638102] iwl data: 00000030: 00 0f 0f 00 02 00 00 00                          ........
[223293.638109] iwl data: 00000000: 40 00 00 00 ff ff ff ff ff ff 00 21 6b 54 60 52  @..........!kT`R
[223293.638116] iwl data: 00000010: ff ff ff ff ff ff d0 01                          ........
[223293.638122] ieee80211 phy2: I iwl_mac_tx leave
[223293.838028] wlan0: direct probe to 00:10:db:a1:69:21 timed out
[223293.840158] phy2: device now idle

Re: Problems connectring to an AP with Acer Aspire Revo

[Johannes Berg]

On Fri, 2010-05-28 at 12:31 +0200, Christian P. Schmidt wrote:

> >> I kind of feel that no packets are sent, since I can't see them on the
> >> firewall, even with packet dumps, not even association attempts.
> > 
> > We can look into this more by enabling TX debugging and general
> > debugging. Could you please reload driver with "modprobe iwlagn
> > debug=0x40843fff" and rerun your test?
> 
> I've attached two files, first the card init, second a full association
> attempt to both access points (encrypted & open).

I'll let Reinette analyse that.

> After looking up the specs for the mini pci express port I'm gonna
> disassemble the HTPC tonight and will figure out if that thing asserts
> the RFKILL signal... even though there's no RFKILL switch.

That isn't useful I think since the rfkill line would disable the
hardware, which we'd know in software and never get this far. Maybe
better check if the antennas are connected properly and are dual-band
antennas if you use 5ghz? :)

johannes

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

On 05/28/2010 12:41 PM, Johannes Berg wrote:
> On Fri, 2010-05-28 at 12:31 +0200, Christian P. Schmidt wrote:
> 
>> After looking up the specs for the mini pci express port I'm gonna
>> disassemble the HTPC tonight and will figure out if that thing asserts
>> the RFKILL signal... even though there's no RFKILL switch.
> 
> That isn't useful I think since the rfkill line would disable the
> hardware, which we'd know in software and never get this far. Maybe
> better check if the antennas are connected properly and are dual-band
> antennas if you use 5ghz? :)

I was wondering about that part, admitted. The original card (ath9k) was
an AGN two-antenna dual-band as well, came vendor fitted - and had the
same issue. I was considering trying different antennas, admittedly, but
I have none at hand.

I see a bunch of WLANs with levels between 180 and 225. I'll compare the
values to disconnected antennas while disassembling.

Regards,
Christian

Re: Problems connectring to an AP with Acer Aspire Revo

[Johannes Berg]

On Fri, 2010-05-28 at 12:49 +0200, Christian P. Schmidt wrote:

> I see a bunch of WLANs with levels between 180 and 225. I'll compare the
> values to disconnected antennas while disassembling.

Those values make no sense to me .. can you use "iw scan" and tell us
the dBm value?

johannes

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

On 05/28/2010 12:54 PM, Johannes Berg wrote:
> On Fri, 2010-05-28 at 12:49 +0200, Christian P. Schmidt wrote:
> 
>> I see a bunch of WLANs with levels between 180 and 225. I'll compare the
>> values to disconnected antennas while disassembling.
> 
> Those values make no sense to me .. can you use "iw scan" and tell us
> the dBm value?

This translates to -52 to -30dBm.

Well, maybe you can answer me a question I never dared to ask because I
felt stupid... I can't take the Intel card online with only ifconfig or
ip? I always get "unknown error 132" on ifconfig wlan0 up / ip link set
wlan0 up...

Regards,
Christian

Re: Problems connectring to an AP with Acer Aspire Revo

[Johannes Berg]

On Fri, 2010-05-28 at 13:10 +0200, Christian P. Schmidt wrote:

> > Those values make no sense to me .. can you use "iw scan" and tell us
> > the dBm value?
> 
> This translates to -52 to -30dBm.

Ok that sounds like you have antennas.

> Well, maybe you can answer me a question I never dared to ask because I
> felt stupid... I can't take the Intel card online with only ifconfig or
> ip? I always get "unknown error 132" on ifconfig wlan0 up / ip link set
> wlan0 up...

Huh. This means that the device detected rfkill. But you previously
posted logs that showed it trying to associate, which cannot happen. And
you can't even scan when you can't bring the device up??

Maybe try the rfkill tool:
http://wireless.kernel.org/en/users/Documentation/rfkill

johannes

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

On 05/28/2010 01:24 PM, Johannes Berg wrote:
> On Fri, 2010-05-28 at 13:10 +0200, Christian P. Schmidt wrote:
> 
> Ok that sounds like you have antennas.

Good :)

>> Well, maybe you can answer me a question I never dared to ask because I
>> felt stupid... I can't take the Intel card online with only ifconfig or
>> ip? I always get "unknown error 132" on ifconfig wlan0 up / ip link set
>> wlan0 up...
> 
> Huh. This means that the device detected rfkill. But you previously
> posted logs that showed it trying to associate, which cannot happen. And
> you can't even scan when you can't bring the device up??
> 
> Maybe try the rfkill tool:
> http://wireless.kernel.org/en/users/Documentation/rfkill

Ok, so something in gentoo's network init skripts unblocks the card when
you bring it online via the skript. When I don't use the skript it's
soft blocked, when running it's unblocked. I did not even have rfkill
installed at that point.

Good, that problem's gone, it's soft blocked when shut down and needs
rfkill unblock all prior to ifconfig up. Thanks for the heads up, but
that doesn't change the problem.

Regards,
Christian

Re: Problems connectring to an AP with Acer Aspire Revo

[Christian P. Schmidt]

On 05/28/2010 01:24 PM, Johannes Berg wrote:
> On Fri, 2010-05-28 at 13:10 +0200, Christian P. Schmidt wrote:
> 
>>> Those values make no sense to me .. can you use "iw scan" and tell us
>>> the dBm value?
>>
>> This translates to -52 to -30dBm.
> 
> Ok that sounds like you have antennas.

Yes, I double checked it. Associations with my Linksys WRT54G running
OpenWRT times out as well, two laptops can successfully connect.

> Maybe try the rfkill tool:
> http://wireless.kernel.org/en/users/Documentation/rfkill

Yes, it was the rfkill tool that caused my attempts to fail. However,
this didn't change my association attempt problems.
I also took my time to look at the PCIe port - steady 3.3V on the RFKILL
pin, which means "no RFKILL".

Any further ideas?

Regards,
Christian

Re: Problems connectring to an AP with Acer Aspire Revo

[Johannes Berg]

On Thu, 2010-06-03 at 17:56 +0200, Christian P. Schmidt wrote:

> > Maybe try the rfkill tool:
> > http://wireless.kernel.org/en/users/Documentation/rfkill
> 
> Yes, it was the rfkill tool that caused my attempts to fail. However,
> this didn't change my association attempt problems.
> I also took my time to look at the PCIe port - steady 3.3V on the RFKILL
> pin, which means "no RFKILL".
> 
> Any further ideas?

Unfortunately not. It would seem that something is causing your frames
not to be transmitted correctly, but I see no reason for that right now.

johannes

Re: Problems connectring to an AP with Acer Aspire Revo

[reinette chatre]

On Thu, 2010-06-03 at 23:48 -0700, Johannes Berg wrote:
> On Thu, 2010-06-03 at 17:56 +0200, Christian P. Schmidt wrote:
> 
> > > Maybe try the rfkill tool:
> > > http://wireless.kernel.org/en/users/Documentation/rfkill
> > 
> > Yes, it was the rfkill tool that caused my attempts to fail. However,
> > this didn't change my association attempt problems.
> > I also took my time to look at the PCIe port - steady 3.3V on the RFKILL
> > pin, which means "no RFKILL".
> > 
> > Any further ideas?
> 
> Unfortunately not. It would seem that something is causing your frames
> not to be transmitted correctly, but I see no reason for that right now.

The logs provided contains a lot of useful information. Among this is
that the device is unable to transmit data with the firmware returning a
"TX_LOCKED" status. From what I understand this is a regulatory check
failure based on the channel type, which does not make sense in this
regard since from what I can tell channel 8, which is an active channel,
is used. I passed this question to our firmware folks and now waiting
for an answer.

Reinette

Re: Problems connectring to an AP with Acer Aspire Revo

[reinette chatre]

On Fri, 2010-06-04 at 09:40 -0700, reinette chatre wrote:
> On Thu, 2010-06-03 at 23:48 -0700, Johannes Berg wrote:
> > On Thu, 2010-06-03 at 17:56 +0200, Christian P. Schmidt wrote:
> > 
> > > > Maybe try the rfkill tool:
> > > > http://wireless.kernel.org/en/users/Documentation/rfkill
> > > 
> > > Yes, it was the rfkill tool that caused my attempts to fail. However,
> > > this didn't change my association attempt problems.
> > > I also took my time to look at the PCIe port - steady 3.3V on the RFKILL
> > > pin, which means "no RFKILL".
> > > 
> > > Any further ideas?
> > 
> > Unfortunately not. It would seem that something is causing your frames
> > not to be transmitted correctly, but I see no reason for that right now.
> 
> The logs provided contains a lot of useful information. Among this is
> that the device is unable to transmit data with the firmware returning a
> "TX_LOCKED" status. From what I understand this is a regulatory check
> failure based on the channel type, which does not make sense in this
> regard since from what I can tell channel 8, which is an active channel,
> is used. I passed this question to our firmware folks and now waiting
> for an answer.

Unfortunately, since the firmware does not actually assert, the firmware
folks are unable to dig into this. I tried to take a second look at your
logs and one thing that I was able to see that is interesting is that,
when scanning, the device picks up very few frames that are good. I see
that there were five scans, none of which contained a since good frame
on 5GHz. On 2.4GHz there was a bit better success, but not consistent.
In the five scans there was the following on 2.4GHz:
1st scan: one good frame each on channels 5, 7, and 8.
2st scan: one good frame on channel 1
3st scan: one good frame each on channels 2, 7, and 9.
4st scan: one good frame each on channels 3, 5, 7, and 8.
5st scan: one good frame each on channels 1, 8, and 9.

If you want to check on this yourself, take a look at the lines:
[223263.179493] ieee80211 phy2: I iwl_rx_scan_results_notif Scan ch.res:
2 [802.11bg] (TSF: 0x00000000:05627B90) - 1 elapsed=33837 usec

The number before "elapsed" indicates the number of good frames seen
while scanning the channel. In the above example there was one.

This seems to indicate that there is some trouble on this platform ...
and makes me start thinking that this card may not work well on this
platform.

Some things you can try:
- are any APs on A band? If not, can you try to activate an AP on A band
to see if you have better success there?
- monitor the RX statistics ...
(/sys/kernel/debug/ieee80211/phy0/iwlagn/debug/ucode_rx_stats) to see if
there is an issue with crc checks and perhaps false alarms and plcp
also.
- something that you could try ... not sure how much it will help if you
are having noise issues ... is to vary how you scan. Since you know
which AP you are associating with, perhaps you can try to limit your
scan to that channel ... and also try passive instead of active. This
can be done with iw.

These are the only things I can think of.

Reinette

Re: Problems connectring to an AP with Acer Aspire Revo

[Carlos Balseiro]

I'm having exactly the same problem with the same hardware
combination. If I can help to diagnose the problem in any way just
tell me what to do.

Re: Problems connectring to an AP with Acer Aspire Revo

[Carlos Balseiro]

Any news on this item?

Re: Problems connectring to an AP with Acer Aspire Revo

[Pavel Roskin]

On Fri, 2010-06-18 at 15:06 +0200, Carlos Balseiro wrote:
> Any news on this item?

You are very unlikely to get a useful answer if you post such questions.
If somebody dealt with your question, you would know it already.  But if
the issue was fixed by somebody not familiar with your previous post,
that person would have no idea that the fix applies to your problem.

If you want a good answer, please put some effort into your question:
summarize the problem, provide links to previous posts, show what you
have tried.

-- 
Regards,
Pavel Roskin

Re: Problems connectring to an AP with Acer Aspire Revo

[Carlos Balseiro]

> This seems to indicate that there is some trouble on this platform ...
> and makes me start thinking that this card may not work well on this
> platform.

Just installed Windows 7 on my machine to test this and efectively,
the problem also exist.