* SSD + sata_nv + btrfs oops
@ 2010-06-01 3:04 Dave Airlie
2010-06-01 4:59 ` Robert Hancock
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Dave Airlie @ 2010-06-01 3:04 UTC (permalink / raw)
To: LKML, Jeff Garzik, Chris Mason
[-- Attachment #1: Type: text/plain, Size: 364 bytes --]
Hi guys,
I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
machine, with btrfs on it.
I'm not sure the btrfs oops isn't due to the disk/controller doing
something bad (almost guaranteed).
Attached the dmesg + config, using 2.6.34 + only drm patches.
Jeff I'd be interested in knowing what is happening to the disk before
btrfs oops.
Dave.
[-- Attachment #2: omg --]
[-- Type: application/octet-stream, Size: 67080 bytes --]
Linux version 2.6.34 (airlied@clockmaker-el6) (gcc version 4.4.3 20100427 (Red Hat 4.4.3-19) (GCC) ) #18 SMP Tue Jun 1 10:59:52 EST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fdbcc00 (usable)
BIOS-e820: 000000007fdbcc00 - 000000007fdbec00 (ACPI NVS)
BIOS-e820: 000000007fdbec00 - 000000007fdc0c00 (ACPI data)
BIOS-e820: 000000007fdc0c00 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7fdbc max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fdbcc00 (usable)
modified: 000000007fdbcc00 - 000000007fdbec00 (ACPI NVS)
modified: 000000007fdbec00 - 000000007fdc0c00 (ACPI data)
modified: 000000007fdc0c00 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fed01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00e00000
found SMP MP-table at [c00fe710] fe710
init_memory_mapping: 0000000000000000-00000000379fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037800000 page 2M
0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 11000-17000
RAMDISK: 356bf000 - 37ff0000
Allocated new RAMDISK: 00943000 - 03273157
Move RAMDISK from 00000000356bf000 - 0000000037fef156 to 00943000 - 03273156
crashkernel: memory value expected
1155MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000379fe
HighMem 0x000379fe -> 0x0007fdbc
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fdbc
On node 0 totalpages: 523596
free_area_init_node: node 0, pgdat c0850140, node_mem_map c3275020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 221994 pages, LIFO batch:31
HighMem zone: 2312 pages used for memmap
HighMem zone: 293558 pages, LIFO batch:31
Using APIC driver default
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: DELL
MPTABLE: Product ID: Dell XPS710
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [12000 - 127ff]
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 16 pages/cpu @c4400000 s41172 r0 d24364 u1048576
pcpu-alloc: s41172 r0 d24364 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519504
Kernel command line: ro root=/dev/mapper/VolGroup00-RHEL500 rd_LVM_LV=VolGroup00/RHEL500 rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet crashkernel=auto
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (45 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000400000 - 000093a6cc] TEXT DATA BSS
#3 [000093b000 - 00009421c8] BRK
#4 [00000fe720 - 0000100000] BIOS reserved
#5 [00000fe710 - 00000fe720] MP-table mpf
#6 [000009fc00 - 00000f0000] BIOS reserved
#7 [00000f022c - 00000fe710] BIOS reserved
#8 [00000f0000 - 00000f022c] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000012000] PGTABLE
#11 [0000943000 - 0003274000] NEW RAMDISK
#12 [0003274000 - 0003275000] BOOTMEM
#13 [0003275000 - 0004275000] BOOTMEM
#14 [0004275000 - 0004275004] BOOTMEM
#15 [0004275040 - 0004275100] BOOTMEM
#16 [0004275100 - 00042751a4] BOOTMEM
#17 [00042751c0 - 00042781c0] BOOTMEM
#18 [00042781c0 - 000427829c] BOOTMEM
#19 [00042782c0 - 000427e2c0] BOOTMEM
#20 [000427e2c0 - 000427e2ef] BOOTMEM
#21 [000427e300 - 000427e4d4] BOOTMEM
#22 [000427e500 - 000427e540] BOOTMEM
#23 [000427e540 - 000427e580] BOOTMEM
#24 [000427e580 - 000427e5c0] BOOTMEM
#25 [000427e5c0 - 000427e600] BOOTMEM
#26 [000427e600 - 000427e640] BOOTMEM
#27 [000427e640 - 000427e680] BOOTMEM
#28 [000427e680 - 000427e6c0] BOOTMEM
#29 [000427e6c0 - 000427e700] BOOTMEM
#30 [000427e700 - 000427e740] BOOTMEM
#31 [000427e740 - 000427e780] BOOTMEM
#32 [000427e780 - 000427e844] BOOTMEM
#33 [000427e880 - 000427e944] BOOTMEM
#34 [0004400000 - 0004410000] BOOTMEM
#35 [0004500000 - 0004510000] BOOTMEM
#36 [0004280980 - 0004280984] BOOTMEM
#37 [00042809c0 - 00042809c4] BOOTMEM
#38 [0004280a00 - 0004280a08] BOOTMEM
#39 [0004280a40 - 0004280a48] BOOTMEM
#40 [0004280a80 - 0004280b20] BOOTMEM
#41 [0004280b40 - 0004280b88] BOOTMEM
#42 [0004280bc0 - 0004284bc0] BOOTMEM
#43 [0004284bc0 - 0004304bc0] BOOTMEM
#44 [0004304bc0 - 0004344bc0] BOOTMEM
Initializing HighMem for node 0 (000379fe:0007fdbc)
Memory: 2029460k/2094832k available (2725k kernel code, 64924k reserved, 1725k data, 352k init, 1183480k highmem)
virtual kernel memory layout:
fixmap : 0xffe80000 - 0xfffff000 (1532 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc0859000 - 0xc08b1000 ( 352 kB)
.data : 0xc06a94e6 - 0xc0858c80 (1725 kB)
.text : 0xc0400000 - 0xc06a94e6 (2725 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=c4400000 soft=c4401000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2660.275 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.55 BogoMIPS (lpj=2660275)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
Enabling APIC mode: Flat. Using 1 I/O APICs
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=2
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... works.
CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06
CPU 1 irqstacks, hard=c4500000 soft=c4501000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (10639.67 BogoMIPS).
khelper used greatest stack depth: 3248 bytes left
Dell XPS710 series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbc45, last bus=6
PCI: Using configuration type 1 for base access
khelper used greatest stack depth: 3212 bytes left
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:0a.0: reg 18: [io 0x4f00-0x4fff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:0a.1: reg 10: [io 0x4c00-0x4c3f]
pci 0000:00:0a.1: reg 20: [io 0x5000-0x503f]
pci 0000:00:0a.1: reg 24: [io 0x5100-0x513f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: reg 10: [mem 0xdfff8000-0xdfff8fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10: [mem 0xdfff7f00-0xdfff7fff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: reg 20: [io 0xecf0-0xecff]
pci 0000:00:0e.0: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:0e.0: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:0e.0: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:0e.0: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:0e.0: reg 20: [io 0xfec0-0xfecf]
pci 0000:00:0e.0: reg 24: [mem 0xdfff9000-0xdfff9fff]
pci 0000:00:0e.1: reg 10: [io 0xfe40-0xfe47]
pci 0000:00:0e.1: reg 14: [io 0xfe50-0xfe53]
pci 0000:00:0e.1: reg 18: [io 0xfe60-0xfe67]
pci 0000:00:0e.1: reg 1c: [io 0xfe70-0xfe73]
pci 0000:00:0e.1: reg 20: [io 0xfed0-0xfedf]
pci 0000:00:0e.1: reg 24: [mem 0xdfffa000-0xdfffafff]
pci 0000:00:0e.2: reg 10: [io 0xfe80-0xfe87]
pci 0000:00:0e.2: reg 14: [io 0xfe90-0xfe93]
pci 0000:00:0e.2: reg 18: [io 0xfea0-0xfea7]
pci 0000:00:0e.2: reg 1c: [io 0xfeb0-0xfeb3]
pci 0000:00:0e.2: reg 20: [io 0xfef0-0xfeff]
pci 0000:00:0e.2: reg 24: [mem 0xdfffb000-0xdfffbfff]
pci 0000:00:0f.1: reg 10: [mem 0xdfffc000-0xdfffffff]
pci 0000:00:0f.1: PME# supported from D3hot D3cold
pci 0000:00:0f.1: PME# disabled
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xdeff0000-0xdeffffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:0a.0: reg 10: [mem 0xddffb800-0xddffbfff]
pci 0000:04:0a.0: reg 14: [mem 0xddffc000-0xddffffff]
pci 0000:04:0a.0: supports D1 D2
pci 0000:04:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:0a.0: PME# disabled
pci 0000:00:0f.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:0f.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0f.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:0f.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0f.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
pci 0000:00:13.0: PCI bridge to [bus 05-05]
pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: reg 18: [mem 0xdcef0000-0xdcefffff 64bit]
pci 0000:06:00.0: reg 20: [io 0xdc00-0xdcff]
pci 0000:06:00.0: reg 30: [mem 0xdcf00000-0xdcf1ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.1: reg 10: [mem 0xdceec000-0xdceeffff 64bit]
pci 0000:06:00.1: supports D1 D2
pci 0000:00:18.0: PCI bridge to [bus 06-06]
pci 0000:00:18.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:18.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:18.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:0a.0: default IRQ router [10de:0360]
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fdbcc00 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:0f.0: PCI bridge to [bus 04-04]
pci 0000:00:0f.0: bridge window [io disabled]
pci 0000:00:0f.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:0f.0: bridge window [mem pref disabled]
pci 0000:00:13.0: PCI bridge to [bus 05-05]
pci 0000:00:13.0: bridge window [io disabled]
pci 0000:00:13.0: bridge window [mem disabled]
pci 0000:00:13.0: bridge window [mem pref disabled]
pci 0000:00:18.0: PCI bridge to [bus 06-06]
pci 0000:00:18.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:18.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:18.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:18.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:04: resource 1 [mem 0xdd000000-0xddffffff]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xdc000000-0xdcffffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42180k freed
khelper used greatest stack depth: 3104 bytes left
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1275355388.216:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1734
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 2944 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 26 for MSI/MSI-X
pcieport 0000:00:13.0: setting latency timer to 64
pcieport 0000:00:13.0: irq 27 for MSI/MSI-X
pcieport 0000:00:18.0: setting latency timer to 64
pcieport 0000:00:18.0: irq 28 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 11
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 11
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 11
sata_nv 0000:00:0e.1: PCI->APIC IRQ transform: INT B -> IRQ 11
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 11
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 11
sata_nv 0000:00:0e.2: PCI->APIC IRQ transform: INT C -> IRQ 11
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 11
ata6: SATA max UDMA/133 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 11
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
/ssd/git/drm-core-next/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0D04, max UDMA/100
ata3.00: configured for UDMA/100
ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-11, max UDMA7
ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
ata2.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0D04 PQ: 0 ANSI: 5
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PBDS DVD+/-RW DH-16W1S, 2D14, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM PBDS DVD+-RW DH-16W1S 2D14 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 352k freed
Write protecting the kernel text: 2728k
Write protecting the kernel read-only data: 1444k
dracut: dracut-004-19.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 10
radeon 0000:06:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV635 0x1002:0x9598).
[drm] register mmio base: 0xDCEF0000
[drm] register mmio size: 65536
ATOM BIOS: 11X
[drm] Clocks initialized !
radeon 0000:06:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:06:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 444256 kiB.
[TTM] Zone highmem: Available graphics memory: 1035996 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:06:00.0: irq 29 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV635 Microcode
platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
firmware.sh used greatest stack depth: 2880 bytes left
platform radeon_cp.0: firmware: requesting radeon/RV635_me.bin
platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] NONE
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC0141000
[drm] vram apper at 0xC0000000
[drm] size 16384000
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x100
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.4.0 20080528 for 0000:06:00.0 on minor 0
modprobe used greatest stack depth: 1908 bytes left
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: PCI->APIC IRQ transform: INT A -> IRQ 10
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdfff8000
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci_hcd 0000:00:0b.1: PCI->APIC IRQ transform: INT B -> IRQ 10
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: Enabling legacy PCI PM
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 10, io mem 0xdfff7f00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xecf0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xecf8 irq 15
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata8: port disabled. ignoring.
firewire_ohci 0000:04:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
firewire_ohci: Added fw-ohci device 0000:04:0a.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usb 2-6: new high speed USB device using ehci_hcd and address 2
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 3 ports detected
dracut: Scanning devices sda3 for LVM logical volumes VolGroup00/RHEL500
dracut: inactive '/dev/VolGroup00/RHEL500' [19.53 GiB] inherit
dracut: inactive '/dev/VolGroup00/F700' [19.53 GiB] inherit
dracut: inactive '/dev/VolGroup00/LogVol01' [49.06 GiB] inherit
dracut: inactive '/dev/VolGroup00/LogVol00' [1.94 GiB] inherit
dracut: inactive '/dev/VolGroup00/LVvirt' [99.19 GiB] inherit
dracut: inactive '/dev/VolGroup00/LogVolF12' [39.06 GiB] inherit
dracut: The link /dev/VolGroup00/RHEL500 should had been created by udev but it was not found. Falling back to direct link creation.
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
firewire_core: created device fw0: GUID 80b9190037db1500, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
usb 1-8: new full speed USB device using ohci_hcd and address 2
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 3 ports detected
usb 2-6.2: new full speed USB device using ehci_hcd and address 4
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 274704
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 261715
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 261722
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 261738
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 261746
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 261750
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 130575
EXT4-fs (dm-0): 7 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/VolGroup00-RHEL500
dracut: Loading SELinux policy
type=1404 audit(1275355396.904:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 195135 rules.
SELinux: 2048 avtab hash slots, 195135 rules.
SELinux: 9 users, 13 roles, 3245 types, 158 bools, 1 sens, 1024 cats
SELinux: 77 classes, 195135 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1275355397.168:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 147
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
input: PC Speaker as /devices/platform/pcspkr/input/input0
tg3.c:v3.108 (February 17, 2010)
tg3 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 11
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95751) rev 4201] (PCI Express) MAC address 00:19:b9:15:db:37
tg3 0000:03:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sr 3:0:0:0: Attached scsi generic sg3 type 5
i2c i2c-2: nForce2 SMBus adapter at 0x5000
i2c i2c-3: nForce2 SMBus adapter at 0x5100
HDA Intel 0000:00:0f.1: can't find IRQ for PCI INT B; probably buggy MP table
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:0f.1: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.1/input/input1
input: HDA NVidia Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input2
input: HDA NVidia Mic at Ext Front Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input3
input: HDA NVidia Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input4
input: HDA NVidia Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input5
input: HDA NVidia Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input6
input: HDA NVidia Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input7
input: HDA NVidia Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input8
input: HDA NVidia HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:0f.1/sound/card0/input9
HDA Intel 0000:06:00.1: PCI->APIC IRQ transform: INT B -> IRQ 9
HDA Intel 0000:06:00.1: irq 30 for MSI/MSI-X
HDA Intel 0000:06:00.1: setting latency timer to 64
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x001f0012
generic-usb 0003:05AC:9221.0001: hiddev96: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0000:00:0b.1-6.2/input0
usb 1-8.1: new full speed USB device using ohci_hcd and address 3
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb1/1-8/1-8.1/1-8.1:1.0/input/input10
generic-usb 0003:413C:2010.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0b.0-8.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb1/1-8/1-8.1/1-8.1:1.1/input/input11
generic-usb 0003:413C:2010.0003: input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:0b.0-8.1/input1
usb 1-8.2: new low speed USB device using ohci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-8/1-8.2/1-8.2:1.0/input/input12
generic-usb 0003:0461:4D15.0004: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-8.2/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
SELinux: initialized (dev sda2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with writeback data mode
SELinux: initialized (dev dm-2, type ext3), uses xattr
Btrfs loaded
device fsid da47d71df5df7585-ed28d13e6c2fdf8b devid 1 transid 8808 /dev/sdb1
Btrfs detected SSD devices, enabling SSD mode
SELinux: initialized (dev sdb1, type btrfs), uses xattr
Adding 2031612k swap on /dev/mapper/VolGroup00-LogVol00. Priority:-1 extents:1 across:2031612k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
tg3 0000:03:00.0: irq 31 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00bf0700
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)
You have old & broken userspace please consider updating mesa
flush-btrfs-1 used greatest stack depth: 1616 bytes left
ata2: EH in SWNCQ mode,QC:qc_active 0x7FFFFE03 sactive 0x7FFFFE03
ata2: SWNCQ:qc_active 0xFE00 defer_bits 0x7FFF0003 last_issue_tag 0xf
dhfis 0x7E00 dmafis 0x200 sdbfis 0x0
ata2: ATA_REG 0x40 ERR_REG 0x0
ata2: tag : dhfis dmafis sdbfis sacitve
ata2: tag 0x9: 1 1 0 1
ata2: tag 0xa: 1 0 0 1
ata2: tag 0xb: 1 0 0 1
ata2: tag 0xc: 1 0 0 1
ata2: tag 0xd: 1 0 0 1
ata2: tag 0xe: 1 0 0 1
ata2: tag 0xf: 0 0 0 1
ata2.00: exception Emask 0x0 SAct 0x7ffffe03 SErr 0x1800000 action 0x6 frozen
ata2: SError: { LinkSeq TrStaTrns }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/70:00:47:cb:b6/00:00:08:00:00/40 tag 0 ncq 57344 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/18:08:0f:3a:a8/00:00:06:00:00/40 tag 1 ncq 12288 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:48:1f:c4:b6/00:00:08:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:50:2f:c4:b6/00:00:08:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:58:3f:c4:b6/00:00:08:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:60:4f:c4:b6/00:00:08:00:00/40 tag 12 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:68:5f:c4:b6/00:00:08:00:00/40 tag 13 ncq 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:70:77:c4:b6/00:00:08:00:00/40 tag 14 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:78:87:c4:b6/00:00:08:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:80:97:c4:b6/00:00:08:00:00/40 tag 16 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/18:88:27:c7:b6/00:00:08:00:00/40 tag 17 ncq 12288 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:90:a7:c4:b6/00:00:08:00:00/40 tag 18 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:98:b7:c4:b6/00:00:08:00:00/40 tag 19 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:a0:c7:c4:b6/00:00:08:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:a8:d7:c4:b6/00:00:08:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:b0:f7:c4:b6/00:00:08:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:b8:07:c5:b6/00:00:08:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:c0:2f:c5:b6/00:00:08:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:c8:5f:c5:b6/00:00:08:00:00/40 tag 25 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:d0:77:c5:b6/00:00:08:00:00/40 tag 26 ncq 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:d8:97:c5:b6/00:00:08:00:00/40 tag 27 ncq 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/a0:e0:b7:c5:b6/00:00:08:00:00/40 tag 28 ncq 81920 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/88:e8:97:c6:b6/00:00:08:00:00/40 tag 29 ncq 69632 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:f0:47:c7:b6/04:00:08:00:00/40 tag 30 ncq 524288 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: nv: skipping hardreset on occupied port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: NODEV after polling detection
ata2.00: revalidation failed (errno=-2)
ata2: hard resetting link
ata2: nv: skipping hardreset on occupied port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: NODEV after polling detection
ata2.00: revalidation failed (errno=-2)
ata2: hard resetting link
ata2: nv: skipping hardreset on occupied port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: NODEV after polling detection
ata2.00: revalidation failed (errno=-2)
ata2.00: disabled
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SRST failed (errno=-16)
ata2: reset failed, giving up
ata2: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen t3
ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
ata2: SRST failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SRST failed (errno=-16)
ata2: reset failed, giving up
ata2: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen t2
ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SRST failed (errno=-16)
ata2: reset failed, giving up
ata2: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen t1
ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
INFO: task modpost:18900 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modpost D 00000000 1832 18900 18899 0x00000084
f26009e0 00200082 001a77a1 00000000 00000000 15e64d69 00000271 f2600c70
1600c50a 00000271 c08afb00 c08afb00 c08afb00 c08a8000 c08afb00 f37da558
c0449a6c 2b22ee11 00000000 138b7f79 f26009e0 c4509b00 c427b098 efc2fe38
Call Trace:
[<c0449a6c>] ? ktime_get_ts+0xc7/0xcf
[<c06a2c73>] ? io_schedule+0x57/0x8f
[<c047d24d>] ? sync_page+0x37/0x3a
[<c06a3112>] ? __wait_on_bit_lock+0x2f/0x6a
[<c047d216>] ? sync_page+0x0/0x3a
[<c047d208>] ? __lock_page+0x6c/0x72
[<c0442358>] ? wake_bit_function+0x0/0x30
[<c047df32>] ? find_lock_page+0x3e/0x59
[<c047e36f>] ? filemap_fault+0x1b9/0x332
[<c048db32>] ? __do_fault+0x52/0x442
[<c048f143>] ? handle_mm_fault+0x4c7/0xa7c
[<c06a6da8>] ? do_page_fault+0x35b/0x371
[<c0429e3d>] ? scheduler_tick+0xd7/0x1e0
[<c06a6a4d>] ? do_page_fault+0x0/0x371
[<c06a4b0e>] ? error_code+0x66/0x6c
[<c06a6a4d>] ? do_page_fault+0x0/0x371
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SRST failed (errno=-16)
ata2: reset failed, giving up
ata2: EH pending after 5 tries, giving up
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 cb 47 00 00 70 00
end_request: I/O error, dev sdb, sector 146197319
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 06 a8 3a 0f 00 00 18 00
end_request: I/O error, dev sdb, sector 111688207
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 1f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195487
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 2f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195503
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 3f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195519
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 4f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195535
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 5f 00 00 10 00
end_request: I/O error, dev sdb, sector 146195551
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 77 00 00 08 00
end_request: I/O error, dev sdb, sector 146195575
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 87 00 00 08 00
end_request: I/O error, dev sdb, sector 146195591
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 97 00 00 08 00
end_request: I/O error, dev sdb, sector 146195607
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c7 27 00 00 18 00
end_request: I/O error, dev sdb, sector 146196263
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 a7 00 00 08 00
end_request: I/O error, dev sdb, sector 146195623
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 b7 00 00 08 00
end_request: I/O error, dev sdb, sector 146195639
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 c7 00 00 08 00
end_request: I/O error, dev sdb, sector 146195655
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 d7 00 00 08 00
end_request: I/O error, dev sdb, sector 146195671
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c4 f7 00 00 08 00
end_request: I/O error, dev sdb, sector 146195703
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 07 00 00 08 00
end_request: I/O error, dev sdb, sector 146195719
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 2f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195759
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 5f 00 00 08 00
end_request: I/O error, dev sdb, sector 146195807
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 77 00 00 10 00
end_request: I/O error, dev sdb, sector 146195831
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 97 00 00 10 00
end_request: I/O error, dev sdb, sector 146195863
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c5 b7 00 00 a0 00
end_request: I/O error, dev sdb, sector 146195895
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c6 97 00 00 88 00
end_request: I/O error, dev sdb, sector 146196119
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 08 b6 c7 47 00 04 00 00
end_request: I/O error, dev sdb, sector 146196295
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: rejecting I/O to offline device
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<fd827418>] read_extent_buffer+0xd/0xd7 [btrfs]
*pdpt = 000000002a98b001 *pde = 0000000000000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:18.0/0000:06:00.1/class
Modules linked in: fuse autofs4 ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 btrfs zlib_deflate crc32c libcrc32c ext3 jbd joydev dm_mirror dm_region_hash dm_log snd_hda_codec_atihdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm i2c_nforce2 sg tg3 snd_timer snd serio_raw pcspkr rtc_cmos soundcore snd_page_alloc libphy dcdbas firewire_ohci firewire_core ata_generic crc_itu_t sr_mod cdrom pata_amd sd_mod ehci_hcd crc_t10dif ohci_hcd radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan]
Pid: 1712, comm: btrfs-transacti Not tainted 2.6.34 #18 0UY253/Dell XPS710
EIP: 0060:[<fd827418>] EFLAGS: 00010292 CPU: 0
EIP is at read_extent_buffer+0xd/0xd7 [btrfs]
EAX: 00000000 EBX: 00000000 ECX: 00000065 EDX: f4b08ae6
ESI: ee220000 EDI: 00000065 EBP: f4b08ae6 ESP: f4b08a8c
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process btrfs-transacti (pid: 1712, ti=f4b08000 task=c2fca780 task.ti=f4b08000)
Stack:
f71a7cb0 ee220000 f71a7cb0 ee220000 0000000a 00000004 fd80adba 00000011
<0> 0000229a 00000000 fd80c77f f70a4114 ee4b2000 0000000a c2c0f000 00000000
<0> 00000004 f2debf60 0000000c ee4b1fff 0000000a 00000a48 0000007e 00000065
Call Trace:
[<fd80adba>] ? btrfs_del_csums+0x10d/0x347 [btrfs]
[<fd80c77f>] ? btrfs_mark_buffer_dirty+0x95/0xd5 [btrfs]
[<fd8051ed>] ? __btrfs_free_extent+0x6fd/0x794 [btrfs]
[<fd806edd>] ? run_one_delayed_ref+0x4dd/0x4f2 [btrfs]
[<c055b0aa>] ? __prop_inc_percpu_max+0x94/0x9e
[<fd807eb0>] ? run_clustered_refs+0x21a/0x29a [btrfs]
[<fd807fe1>] ? btrfs_run_delayed_refs+0xb1/0x185 [btrfs]
[<fd81093b>] ? __btrfs_end_transaction+0x46/0xfb [btrfs]
[<fd814c95>] ? cow_file_range+0x470/0x484 [btrfs]
[<fd8154e6>] ? run_delalloc_range+0xaa/0x383 [btrfs]
[<fd82bc65>] ? __extent_writepage+0x21a/0x705 [btrfs]
[<fd82c3dd>] ? extent_write_cache_pages.clone.0+0x128/0x1fe [btrfs]
[<fd812d7a>] ? __btrfs_submit_bio_start+0x0/0x21 [btrfs]
[<fd812d65>] ? __btrfs_submit_bio_done+0x0/0x15 [btrfs]
[<fd812c7e>] ? btrfs_submit_bio_hook+0x0/0xe7 [btrfs]
[<fd827862>] ? submit_one_bio+0x3f/0x66 [btrfs]
[<fd82787e>] ? submit_one_bio+0x5b/0x66 [btrfs]
[<fd82c5af>] ? extent_writepages+0x3b/0x50 [btrfs]
[<fd81386c>] ? btrfs_get_extent+0x0/0x949 [btrfs]
[<fd813773>] ? btrfs_writepages+0x18/0x1b [btrfs]
[<c0482388>] ? do_writepages+0x14/0x20
[<c047d6c9>] ? __filemap_fdatawrite_range+0x52/0x5a
[<c047ddab>] ? filemap_flush+0x12/0x16
[<fd826a1a>] ? btrfs_run_ordered_operations+0x117/0x195 [btrfs]
[<fd810d9f>] ? btrfs_commit_transaction+0x5d/0x563 [btrfs]
[<c044232f>] ? autoremove_wake_function+0x0/0x29
[<fd80d20b>] ? transaction_kthread+0x13e/0x1b0 [btrfs]
[<c0421f51>] ? complete+0x28/0x36
[<fd80d0cd>] ? transaction_kthread+0x0/0x1b0 [btrfs]
[<c0442003>] ? kthread+0x5f/0x64
[<c0441fa4>] ? kthread+0x0/0x64
[<c0402b36>] ? kernel_thread_helper+0x6/0x10
Code: 53 0c 8b 55 00 89 53 10 8b 11 8b 4c 24 28 89 53 14 8b 11 89 53 18 83 c4 08 5b 5e 5f 5d c3 55 89 d5 57 89 cf 56 53 89 c3 83 ec 08 <8b> 30 81 e6 ff 0f 00 00 3b 48 08 8d 34 31 76 0f ba 99 0d 00 00
EIP: [<fd827418>] read_extent_buffer+0xd/0xd7 [btrfs] SS:ESP 0068:f4b08a8c
CR2: 0000000000000000
---[ end trace af77d132a493b385 ]---
btrfs-transacti used greatest stack depth: 1264 bytes left
ata2: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen
ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata2: hard resetting link
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<fd827418>] read_extent_buffer+0xd/0xd7 [btrfs]
*pdpt = 00000000028b1001 *pde = 0000000000000000
Oops: 0000 [#2] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:18.0/0000:06:00.1/class
Modules linked in: fuse autofs4 ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 btrfs zlib_deflate crc32c libcrc32c ext3 jbd joydev dm_mirror dm_region_hash dm_log snd_hda_codec_atihdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm i2c_nforce2 sg tg3 snd_timer snd serio_raw pcspkr rtc_cmos soundcore snd_page_alloc libphy dcdbas firewire_ohci firewire_core ata_generic crc_itu_t sr_mod cdrom pata_amd sd_mod ehci_hcd crc_t10dif ohci_hcd radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan]
Pid: 3515, comm: flush-btrfs-1 Tainted: G D 2.6.34 #18 0UY253/Dell XPS710
EIP: 0060:[<fd827418>] EFLAGS: 00010292 CPU: 1
EIP is at read_extent_buffer+0xd/0xd7 [btrfs]
EAX: 00000000 EBX: 00000000 ECX: 00000065 EDX: f277fae6
ESI: 9aca3000 EDI: 00000065 EBP: f277fae6 ESP: f277fa8c
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process flush-btrfs-1 (pid: 3515, ti=f277f000 task=f25dbb40 task.ti=f277f000)
Stack:
f7269540 9aca3000 f7269540 9aca3000 00000003 00000004 fd80adba 00000011
<0> 0000229a 00000000 fd80c77f f70a4114 9aca5000 00000003 c2c0f000 00000000
<0> 00000004 f70eafc0 0000000c 9aca4fff 00000003 00000008 0000007e 00000065
Call Trace:
[<fd80adba>] ? btrfs_del_csums+0x10d/0x347 [btrfs]
[<fd80c77f>] ? btrfs_mark_buffer_dirty+0x95/0xd5 [btrfs]
[<fd8051ed>] ? __btrfs_free_extent+0x6fd/0x794 [btrfs]
[<fd806edd>] ? run_one_delayed_ref+0x4dd/0x4f2 [btrfs]
[<c055b0aa>] ? __prop_inc_percpu_max+0x94/0x9e
[<fd807eb0>] ? run_clustered_refs+0x21a/0x29a [btrfs]
[<fd807fe1>] ? btrfs_run_delayed_refs+0xb1/0x185 [btrfs]
[<fd81093b>] ? __btrfs_end_transaction+0x46/0xfb [btrfs]
[<fd814c95>] ? cow_file_range+0x470/0x484 [btrfs]
[<fd8154e6>] ? run_delalloc_range+0xaa/0x383 [btrfs]
[<fd82bc65>] ? __extent_writepage+0x21a/0x705 [btrfs]
[<fd82c3dd>] ? extent_write_cache_pages.clone.0+0x128/0x1fe [btrfs]
[<fd812d7a>] ? __btrfs_submit_bio_start+0x0/0x21 [btrfs]
[<fd812d65>] ? __btrfs_submit_bio_done+0x0/0x15 [btrfs]
[<fd812c7e>] ? btrfs_submit_bio_hook+0x0/0xe7 [btrfs]
[<fd827862>] ? submit_one_bio+0x3f/0x66 [btrfs]
[<fd82787e>] ? submit_one_bio+0x5b/0x66 [btrfs]
[<fd82c5af>] ? extent_writepages+0x3b/0x50 [btrfs]
[<fd81386c>] ? btrfs_get_extent+0x0/0x949 [btrfs]
[<fd813773>] ? btrfs_writepages+0x18/0x1b [btrfs]
[<c0482388>] ? do_writepages+0x14/0x20
[<c04bdffa>] ? writeback_single_inode+0xb2/0x1dd
[<c04be9e6>] ? writeback_inodes_wb+0x2f3/0x39a
[<c04beb89>] ? wb_writeback+0xfc/0x15a
[<c06a3097>] ? schedule_timeout+0x1af/0x1c5
[<c04bed7c>] ? wb_do_writeback+0x119/0x129
[<c04bedab>] ? bdi_writeback_task+0x1f/0x67
[<c048c2ca>] ? bdi_start_fn+0x52/0xa0
[<c048c278>] ? bdi_start_fn+0x0/0xa0
[<c0442003>] ? kthread+0x5f/0x64
[<c0441fa4>] ? kthread+0x0/0x64
[<c0402b36>] ? kernel_thread_helper+0x6/0x10
Code: 53 0c 8b 55 00 89 53 10 8b 11 8b 4c 24 28 89 53 14 8b 11 89 53 18 83 c4 08 5b 5e 5f 5d c3 55 89 d5 57 89 cf 56 53 89 c3 83 ec 08 <8b> 30 81 e6 ff 0f 00 00 3b 48 08 8d 34 31 76 0f ba 99 0d 00 00
EIP: [<fd827418>] read_extent_buffer+0xd/0xd7 [btrfs] SS:ESP 0068:f277fa8c
CR2: 0000000000000000
---[ end trace af77d132a493b386 ]---
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
[-- Attachment #3: .config --]
[-- Type: application/octet-stream, Size: 76204 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Tue Jun 1 10:59:03 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NET is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=m
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
# CONFIG_TOUCHSCREEN_USB_E2I is not set
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_SENSORS_APPLESMC=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_ISA is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_TRANZPORT is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
# CONFIG_RAMZSWAP is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_STRIP is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_DT3155 is not set
# CONFIG_CRYSTALHD is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_DELL_LAPTOP is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 3:04 SSD + sata_nv + btrfs oops Dave Airlie
@ 2010-06-01 4:59 ` Robert Hancock
2010-06-01 5:02 ` Dave Airlie
2010-06-01 5:36 ` Jeff Garzik
2010-06-08 19:24 ` Maciej Rutecki
2 siblings, 1 reply; 7+ messages in thread
From: Robert Hancock @ 2010-06-01 4:59 UTC (permalink / raw)
To: Dave Airlie; +Cc: LKML, Jeff Garzik, Chris Mason
On 05/31/2010 09:04 PM, Dave Airlie wrote:
> Hi guys,
>
> I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
> machine, with btrfs on it.
>
> I'm not sure the btrfs oops isn't due to the disk/controller doing
> something bad (almost guaranteed).
>
> Attached the dmesg + config, using 2.6.34 + only drm patches.
>
> Jeff I'd be interested in knowing what is happening to the disk before
> btrfs oops.
ata2: EH in SWNCQ mode,QC:qc_active 0x7FFFFE03 sactive 0x7FFFFE03
ata2: SWNCQ:qc_active 0xFE00 defer_bits 0x7FFF0003 last_issue_tag 0xf
dhfis 0x7E00 dmafis 0x200 sdbfis 0x0
ata2: ATA_REG 0x40 ERR_REG 0x0
ata2: tag : dhfis dmafis sdbfis sacitve
ata2: tag 0x9: 1 1 0 1
ata2: tag 0xa: 1 0 0 1
ata2: tag 0xb: 1 0 0 1
ata2: tag 0xc: 1 0 0 1
ata2: tag 0xd: 1 0 0 1
ata2: tag 0xe: 1 0 0 1
ata2: tag 0xf: 0 0 0 1
ata2.00: exception Emask 0x0 SAct 0x7ffffe03 SErr 0x1800000 action 0x6
frozen
ata2: SError: { LinkSeq TrStaTrns }
Last line is probably the most informative, SATA link sequence error and
transport state transition error. That's probably something bad
happening at the low level between the controller and drive. Is this
happening repeatedly?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 4:59 ` Robert Hancock
@ 2010-06-01 5:02 ` Dave Airlie
2010-06-01 5:06 ` Robert Hancock
0 siblings, 1 reply; 7+ messages in thread
From: Dave Airlie @ 2010-06-01 5:02 UTC (permalink / raw)
To: Robert Hancock; +Cc: LKML, Jeff Garzik, Chris Mason
On Tue, Jun 1, 2010 at 2:59 PM, Robert Hancock <hancockrwd@gmail.com> wrote:
> On 05/31/2010 09:04 PM, Dave Airlie wrote:
>>
>> Hi guys,
>>
>> I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
>> machine, with btrfs on it.
>>
>> I'm not sure the btrfs oops isn't due to the disk/controller doing
>> something bad (almost guaranteed).
>>
>> Attached the dmesg + config, using 2.6.34 + only drm patches.
>>
>> Jeff I'd be interested in knowing what is happening to the disk before
>> btrfs oops.
>
> ata2: EH in SWNCQ mode,QC:qc_active 0x7FFFFE03 sactive 0x7FFFFE03
> ata2: SWNCQ:qc_active 0xFE00 defer_bits 0x7FFF0003 last_issue_tag 0xf
> dhfis 0x7E00 dmafis 0x200 sdbfis 0x0
> ata2: ATA_REG 0x40 ERR_REG 0x0
> ata2: tag : dhfis dmafis sdbfis sacitve
> ata2: tag 0x9: 1 1 0 1
> ata2: tag 0xa: 1 0 0 1
> ata2: tag 0xb: 1 0 0 1
> ata2: tag 0xc: 1 0 0 1
> ata2: tag 0xd: 1 0 0 1
> ata2: tag 0xe: 1 0 0 1
> ata2: tag 0xf: 0 0 0 1
> ata2.00: exception Emask 0x0 SAct 0x7ffffe03 SErr 0x1800000 action 0x6
> frozen
> ata2: SError: { LinkSeq TrStaTrns }
>
> Last line is probably the most informative, SATA link sequence error and
> transport state transition error. That's probably something bad happening at
> the low level between the controller and drive. Is this happening
> repeatedly?
>
from another boot I do see another one.
ata2: EH in SWNCQ mode,QC:qc_active 0x1FF sactive 0x1FF
ata2: SWNCQ:qc_active 0x7F defer_bits 0x180 last_issue_tag 0x6
dhfis 0x3F dmafis 0x8 sdbfis 0x0
ata2: ATA_REG 0x41 ERR_REG 0x84
ata2: tag : dhfis dmafis sdbfis sacitve
ata2: tag 0x0: 1 0 0 1
ata2: tag 0x1: 1 0 0 1
ata2: tag 0x2: 1 0 0 1
ata2: tag 0x3: 1 1 0 1
ata2: tag 0x4: 1 0 0 1
ata2: tag 0x5: 1 0 0 1
ata2: tag 0x6: 0 0 0 1
ata2.00: exception Emask 0x1 SAct 0x1ff SErr 0x3800000 action 0x6 frozen
So yes it seems to happen quite a bit, I'm wondering is SWNCQ is
something I should be disabling for this controller.
Dave.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 5:02 ` Dave Airlie
@ 2010-06-01 5:06 ` Robert Hancock
0 siblings, 0 replies; 7+ messages in thread
From: Robert Hancock @ 2010-06-01 5:06 UTC (permalink / raw)
To: Dave Airlie; +Cc: LKML, Jeff Garzik, Chris Mason
On Mon, May 31, 2010 at 11:02 PM, Dave Airlie <airlied@gmail.com> wrote:
> On Tue, Jun 1, 2010 at 2:59 PM, Robert Hancock <hancockrwd@gmail.com> wrote:
>> On 05/31/2010 09:04 PM, Dave Airlie wrote:
>>>
>>> Hi guys,
>>>
>>> I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
>>> machine, with btrfs on it.
>>>
>>> I'm not sure the btrfs oops isn't due to the disk/controller doing
>>> something bad (almost guaranteed).
>>>
>>> Attached the dmesg + config, using 2.6.34 + only drm patches.
>>>
>>> Jeff I'd be interested in knowing what is happening to the disk before
>>> btrfs oops.
>>
>> ata2: EH in SWNCQ mode,QC:qc_active 0x7FFFFE03 sactive 0x7FFFFE03
>> ata2: SWNCQ:qc_active 0xFE00 defer_bits 0x7FFF0003 last_issue_tag 0xf
>> dhfis 0x7E00 dmafis 0x200 sdbfis 0x0
>> ata2: ATA_REG 0x40 ERR_REG 0x0
>> ata2: tag : dhfis dmafis sdbfis sacitve
>> ata2: tag 0x9: 1 1 0 1
>> ata2: tag 0xa: 1 0 0 1
>> ata2: tag 0xb: 1 0 0 1
>> ata2: tag 0xc: 1 0 0 1
>> ata2: tag 0xd: 1 0 0 1
>> ata2: tag 0xe: 1 0 0 1
>> ata2: tag 0xf: 0 0 0 1
>> ata2.00: exception Emask 0x0 SAct 0x7ffffe03 SErr 0x1800000 action 0x6
>> frozen
>> ata2: SError: { LinkSeq TrStaTrns }
>>
>> Last line is probably the most informative, SATA link sequence error and
>> transport state transition error. That's probably something bad happening at
>> the low level between the controller and drive. Is this happening
>> repeatedly?
>>
>
> from another boot I do see another one.
>
> ata2: EH in SWNCQ mode,QC:qc_active 0x1FF sactive 0x1FF
> ata2: SWNCQ:qc_active 0x7F defer_bits 0x180 last_issue_tag 0x6
> dhfis 0x3F dmafis 0x8 sdbfis 0x0
> ata2: ATA_REG 0x41 ERR_REG 0x84
> ata2: tag : dhfis dmafis sdbfis sacitve
> ata2: tag 0x0: 1 0 0 1
> ata2: tag 0x1: 1 0 0 1
> ata2: tag 0x2: 1 0 0 1
> ata2: tag 0x3: 1 1 0 1
> ata2: tag 0x4: 1 0 0 1
> ata2: tag 0x5: 1 0 0 1
> ata2: tag 0x6: 0 0 0 1
> ata2.00: exception Emask 0x1 SAct 0x1ff SErr 0x3800000 action 0x6 frozen
>
> So yes it seems to happen quite a bit, I'm wondering is SWNCQ is
> something I should be disabling for this controller.
Wouldn't hurt to try (swncq=0 module parameter). However, from some of
the later output in the log you posted, it seems like not only was
there some kind of hiccup resulting in a timeout, but later there were
more Serror flags raised like PHY ready change, CommWake, etc. and the
drive seemed to stop responding entirely. That does tend to smell like
some kind of hardware problem to me..
btrfs exploding is presumably a kernel problem, of course..
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 3:04 SSD + sata_nv + btrfs oops Dave Airlie
2010-06-01 4:59 ` Robert Hancock
@ 2010-06-01 5:36 ` Jeff Garzik
2010-06-01 11:23 ` Chris Mason
2010-06-08 19:24 ` Maciej Rutecki
2 siblings, 1 reply; 7+ messages in thread
From: Jeff Garzik @ 2010-06-01 5:36 UTC (permalink / raw)
To: Dave Airlie; +Cc: LKML, Chris Mason
On 05/31/2010 11:04 PM, Dave Airlie wrote:
> Hi guys,
>
> I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
> machine, with btrfs on it.
>
> I'm not sure the btrfs oops isn't due to the disk/controller doing
> something bad (almost guaranteed).
The btrfs oops may be poor handling of an I/O error thrown by the block
error.
Root cause is definitely your SATA PHY throwing some hardware errors
from the transport layer (low level SATA packet transmission failures).
Everything else sorta falls apart after that.
First guesses are the usual suspects: cabling, temperature, power or
SATA ports on the [SATA controller | SATA device] going bad.
Disabling swncq will only improve things from the perspective of slowing
things down and giving the hardware less to do. swncq makes things
parallel, so forcing only one transaction at a time certainly increases
the chances of success by reducing complexity and serializing transactions.
Jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 5:36 ` Jeff Garzik
@ 2010-06-01 11:23 ` Chris Mason
0 siblings, 0 replies; 7+ messages in thread
From: Chris Mason @ 2010-06-01 11:23 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Dave Airlie, LKML
On Tue, Jun 01, 2010 at 01:36:42AM -0400, Jeff Garzik wrote:
> On 05/31/2010 11:04 PM, Dave Airlie wrote:
> >Hi guys,
> >
> >I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
> >machine, with btrfs on it.
> >
> >I'm not sure the btrfs oops isn't due to the disk/controller doing
> >something bad (almost guaranteed).
>
> The btrfs oops may be poor handling of an I/O error thrown by the
> block error.
Correct, we do pretty well when there is an alternate copy but we're
still working on the eios when there is only one.
Dave, one the hardware side is sorted out, if you have trouble with the
btrfs data let me know.
-chris
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: SSD + sata_nv + btrfs oops
2010-06-01 3:04 SSD + sata_nv + btrfs oops Dave Airlie
2010-06-01 4:59 ` Robert Hancock
2010-06-01 5:36 ` Jeff Garzik
@ 2010-06-08 19:24 ` Maciej Rutecki
2 siblings, 0 replies; 7+ messages in thread
From: Maciej Rutecki @ 2010-06-08 19:24 UTC (permalink / raw)
To: Dave Airlie; +Cc: LKML, Jeff Garzik, Chris Mason
On wtorek, 1 czerwca 2010 o 05:04:33 Dave Airlie wrote:
> Hi guys,
>
> I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
> machine, with btrfs on it.
>
> I'm not sure the btrfs oops isn't due to the disk/controller doing
> something bad (almost guaranteed).
>
> Attached the dmesg + config, using 2.6.34 + only drm patches.
>
> Jeff I'd be interested in knowing what is happening to the disk before
> btrfs oops.
>
> Dave.
>
I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=16162
for your bug report, please add your address to the CC list in there, thanks!
--
Maciej Rutecki
http://www.maciek.unixy.pl
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-06-08 19:25 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-06-01 3:04 SSD + sata_nv + btrfs oops Dave Airlie
2010-06-01 4:59 ` Robert Hancock
2010-06-01 5:02 ` Dave Airlie
2010-06-01 5:06 ` Robert Hancock
2010-06-01 5:36 ` Jeff Garzik
2010-06-01 11:23 ` Chris Mason
2010-06-08 19:24 ` Maciej Rutecki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.